@article{BohrnMuchaWerneretal.2013,
  author    = {Bohrn, Ulrich and Mucha, Andreas and Werner, Frederik and Trattner, Barbara and B{\"a}cker, Matthias and Krumbe, Christoph and Schienle, Meinrad and St{\"u}tz, Evamaria and Schmitt-Landsiedel, Doris and Fleischer, Maximilian and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {A critical comparison of cell-based sensor systems for the detection of Cr (VI) in aquatic environment},
  series = {Sensors and actuators. B: Chemical},
  volume    = {Vol. 182},
  journal   = {Sensors and actuators. B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  pages     = {58 -- 65},
  year      = {2013},
  language  = {en}
}
@article{MiyamotoIchimuraWagneretal.2013,
  author    = {Miyamoto, Ko-ichiro and Ichimura, Hiroki and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Chemical imaging of the concentration profile of ion diffusion in a microfluidic channel},
  series = {Sensors and actuators. B: Chemical},
  volume    = {189},
  journal   = {Sensors and actuators. B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  doi       = {10.1016/j.snb.2013.04.057},
  pages     = {240 -- 245},
  year      = {2013},
  abstract  = {The chemical imaging sensor is a device to visualize the spatial distribution of chemical species based on the principle of LAPS (light-addressable potentiometric sensor), which is a field-effect chemical sensor based on semiconductor. In this study, the chemical imaging sensor has been applied to investigate the ion profile of laminar flows in a microfluidic channel. The chemical images (pH maps) were collected in a Y-shaped microfluidic channel while injecting HCl and NaCl solutions into two branches. From the chemical images, it was clearly observed that the injected solutions formed laminar flows in the channel. In addition, ion diffusion across the laminar flows was observed, and the diffusion coefficient could be derived by fitting the pH profiles to the Fick's equation.},
  language  = {en}
}
@article{Stulpe2013,
  author    = {Stulpe, Werner},
  title     = {From the attempt of certain classical reformulations of quantum mechanics to quasi-probability representations},
  series = {Journal of mathematical physics},
  volume    = {55},
  journal   = {Journal of mathematical physics},
  number    = {1},
  publisher = {American Institute of Physics},
  issn      = {1089-7658 (Online)},
  doi       = {10.1063/1.4861939},
  pages     = {25 Seiten},
  year      = {2013},
  abstract  = {The concept of an injective affine embedding of the quantum states into a set of classical states, i.e., into the set of the probability measures on some measurable space, as well as its relation to statistically complete observables is revisited, and its limitation in view of a classical reformulation of the statistical scheme of quantum mechanics is discussed. In particular, on the basis of a theorem concerning a non-denseness property of a set of coexistent effects, it is shown that an injective classical embedding of the quantum states cannot be supplemented by an at least approximate classical description of the quantum mechanical effects. As an alternative approach, the concept of quasi-probability representations of quantum mechanics is considered.},
  language  = {de}
}
@article{AbulnagaPinkenburgSchiffelsetal.2013,
  author    = {Abulnaga, El-Hussiny and Pinkenburg, Olaf and Schiffels, Johannes and E-Refai, Ahmed and Buckel, Wolfgang and Selmer, Thorsten},
  title     = {Effect of an Oxygen-Tolerant Bifurcating Butyryl Coenzyme A Dehydrogenase/Electron-Transferring Flavoprotein Complex from Clostridium difficile on Butyrate Production in Escherichia coli},
  series = {Journal of bacteriology},
  volume    = {195},
  journal   = {Journal of bacteriology},
  number    = {16},
  issn      = {1098-5530 [E-Journal]},
  pages     = {3704 -- 3713},
  year      = {2013},
  language  = {en}
}
@article{AboulnagaPinkenburgSchiffelsetal.2013,
  author    = {Aboulnaga, E. H. and Pinkenburg, O. and Schiffels, Johannes and El-Refai, A. and Buckel, W. and Selmer, Thorsten},
  title     = {Butyrate production in Escherichia coli: Exploitation of an oxygen tolerant bifurcating butyryl-CoA dehydrogenase/electron transferring flavoprotein complex from Clostridium difficile},
  series = {Journal of bacteriology. June 14, 2013},
  journal   = {Journal of bacteriology. June 14, 2013},
  issn      = {1098-5530 (E-Journal) ; 0021-9193 (Print)},
  pages     = {Epub ahead of print},
  year      = {2013},
  language  = {de}
}
@article{RensFerrein2013,
  author    = {Rens, Gavin and Ferrein, Alexander},
  title     = {Belief-node condensation for online POMDP algorithms},
  publisher = {IEEE},
  address   = {New York},
  pages     = {1 -- 7},
  year      = {2013},
  abstract  = {Slightly extended version of the paper accepted at the Robotics and Artificial Intelligence Workshop, a special track of IEEE AFRICON-2013, held in Mauritius, 9-12 September 2013},
  language  = {en}
}
@article{SchiffelsPinkenburgScheldenetal.2013,
  author    = {Schiffels, Johannes and Pinkenburg, Olaf and Schelden, Maximilian and Aboulnaga, El-Hussiny A. A. and Baumann, Marcus and Selmer, Thorsten},
  title     = {An innovative cloning platform enables large-scale production and maturation of an oxygen-tolerant [NiFe]-hydrogenase from cupriavidus necator in Escherichia coli},
  series = {PLOS one. 2013},
  journal   = {PLOS one. 2013},
  publisher = {Public Library of Science},
  address   = {San Francisco, California},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0068812},
  year      = {2013},
  language  = {en}
}
@article{MuellerBillmaierMueller2013,
  author    = {M{\"u}ller, Karsten and Billmaier, Karl and M{\"u}ller, Ernst A.},
  title     = {Abwasserw{\"a}rmenutzung},
  series = {Wasserwirtschaft, Wassertechnik : wwt. 2013, H. 5},
  journal   = {Wasserwirtschaft, Wassertechnik : wwt. 2013, H. 5},
  publisher = {Deutscher Fachverlag},
  address   = {Frankfurt am Main},
  issn      = {1438-5716},
  pages     = {24 -- 26},
  year      = {2013},
  language  = {de}
}
@article{MuribGrinsvenGrietenetal.2013,
  author    = {Murib, M. S. and Grinsven, B. van and Grieten, L. and Janssens, S. D. and Vermeeren, V. and Eersels, K. and Broeders, J. and Ameloot, M. and Michiels, L. and Ceuninck, W. De and Haenen, K. and Sch{\"o}ning, Michael Josef and Wagner, Patrick},
  title     = {Electronic monitoring of chemical DNA denaturation on nanocrystalline diamond electrodes with different molarities and flow rates},
  series = {Physica Status Solidi (A). Vol. 210 (2013), iss. 5},
  journal   = {Physica Status Solidi (A). Vol. 210 (2013), iss. 5},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  issn      = {0031-8965},
  pages     = {911 -- 917},
  year      = {2013},
  language  = {en}
}
@article{HuckSchiffelsHerreraetal.2013,
  author    = {Huck, Christina and Schiffels, Johannes and Herrera, Cony N. and Schelden, Maximilian and Selmer, Thorsten and Poghossian, Arshak and Baumann, Marcus and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Metabolic responses of Escherichia coli upon glucose pulses captured by a capacitive field-effect sensor},
  series = {Physica Status Solidi (A)},
  volume    = {210},
  journal   = {Physica Status Solidi (A)},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0031-8965},
  doi       = {10.1002/pssa.201200900},
  pages     = {926 -- 931},
  year      = {2013},
  abstract  = {Living cells are complex biological systems transforming metabolites taken up from the surrounding medium. Monitoring the responses of such cells to certain substrate concentrations is a challenging task and offers possibilities to gain insight into the vitality of a community influenced by the growth environment. Cell-based sensors represent a promising platform for monitoring the metabolic activity and thus, the "welfare" of relevant organisms. In the present study, metabolic responses of the model bacterium Escherichia coli in suspension, layered onto a capacitive field-effect structure, were examined to pulses of glucose in the concentration range between 0.05 and 2 mM. It was found that acidification of the surrounding medium takes place immediately after glucose addition and follows Michaelis-Menten kinetic behavior as a function of the glucose concentration. In future, the presented setup can, therefore, be used to study substrate specificities on the enzymatic level and may as well be used to perform investigations of more complex metabolic responses. Conclusions and perspectives highlighting this system are discussed.},
  language  = {en}
}
@article{SchusserLeinhosBaeckeretal.2013,
  author    = {Schusser, Sebastian and Leinhos, Marcel and B{\"a}cker, Matthias and Poghossian, Arshak and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Impedance spectroscopy: A tool for real-time in situ monitoring of the degradation of biopolymers},
  series = {Physica Status Solidi (A)},
  volume    = {210},
  journal   = {Physica Status Solidi (A)},
  number    = {5},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1521-396X ; 0031-8965},
  doi       = {10.1002/pssa.201200941},
  pages     = {905 -- 910},
  year      = {2013},
  abstract  = {Investigation of the degradation kinetics of biodegradable polymers is essential for the development of implantable biomedical devices with predicted biodegradability. In this work, an impedimetric sensor has been applied for real-time and in situ monitoring of degradation processes of biopolymers. The sensor consists of two platinum thin-film electrodes covered by a polymer film to be studied. The benchmark biomedical polymer poly(D,L-lactic acid) (PDLLA) was used as a model system. PDLLA films were deposited on the sensor structure from a polymer solution by using the spin-coating method. The degradation kinetics of PDLLA films have been studied in alkaline solutions of pH 9 and 12 by means of an impedance spectroscopy (IS) method. Any changes in a polymer capacitance/resistance induced by water uptake and/or polymer degradation will modulate the global impedance of the polymer-covered sensor that can be used as an indicator of the polymer degradation. The degradation rate can be evaluated from the time-dependent impedance spectra. As expected, a faster degradation has been observed for PDLLA films exposed to pH 12 solution.},
  language  = {en}
}
@article{PoghossianWeilCherstvyetal.2013,
  author    = {Poghossian, Arshak and Weil, M. and Cherstvy, A. G. and Sch{\"o}ning, Michael Josef},
  title     = {Electrical monitoring of polyelectrolyte multilayer formation by means of capacitive field-effect devices},
  series = {Analytical and bioanalytical chemistry},
  volume    = {405},
  journal   = {Analytical and bioanalytical chemistry},
  number    = {20},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1130 ; 1618-2642},
  doi       = {10.1007/s00216-013-6951-9},
  pages     = {6425 -- 6436},
  year      = {2013},
  abstract  = {The semiconductor field-effect platform represents a powerful tool for detecting the adsorption and binding of charged macromolecules with direct electrical readout. In this work, a capacitive electrolyte-insulator-semiconductor (EIS) field-effect sensor consisting of an Al-p-Si-SiO2 structure has been applied for real-time in situ electrical monitoring of the layer-by-layer formation of polyelectrolyte (PE) multilayers (PEM). The PEMs were deposited directly onto the SiO2 surface without any precursor layer or drying procedures. Anionic poly(sodium 4-styrene sulfonate) and cationic weak polyelectrolyte poly(allylamine hydrochloride) have been chosen as a model system. The effect of the ionic strength of the solution, polyelectrolyte concentration, number and polarity of the PE layers on the characteristics of the PEM-modified EIS sensors have been studied by means of capacitance-voltage and constant-capacitance methods. In addition, the thickness, surface morphology, roughness and wettabilityof the PE mono- and multilayers have been characterised by ellipsometry, atomic force microscopy and water contact-angle methods, respectively. To explain potential oscillations on the gate surface and signal behaviour of the capacitive field-effect EIS sensor modified with a PEM, a simplified electrostatic model that takes into account the reduced electrostatic screening of PE charges by mobile ions within the PEM has been proposed and discussed.},
  language  = {en}
}
@article{WernerWagnerYoshinobuetal.2013,
  author    = {Werner, Frederik and Wagner, Torsten and Yoshinobu, Tatsuo and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Frequency behaviour of light-addressable potentiometric sensors},
  series = {Physica Status Solidi (A)},
  volume    = {210},
  journal   = {Physica Status Solidi (A)},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-396X ; 0031-8965},
  doi       = {10.1002/pssa.201200929},
  pages     = {884 -- 891},
  year      = {2013},
  abstract  = {Light-addressable potentiometric sensors (LAPS) are semiconductor-based potentiometric sensors, with the advantage to detect the concentration of a chemical species in a liquid solution above the sensor surface in a spatially resolved manner. The addressing is achieved by a modulated and focused light source illuminating the semiconductor and generating a concentration-depending photocurrent. This work introduces a LAPS set-up that is able to monitor the electrical impedance in addition to the photocurrent. The impedance spectra of a LAPS structure, with and without illumination, as well as the frequency behaviour of the LAPS measurement are investigated. The measurements are supported by electrical equivalent circuits to explain the impedance and the LAPS-frequency behaviour. The work investigates the influence of different parameters on the frequency behaviour of the LAPS. Furthermore, the phase shift of the photocurrent, the influence of the surface potential as well as the changes of the sensor impedance will be discussed.},
  language  = {en}
}
@article{ItabashiKosakaMiyamotoetal.2013,
  author    = {Itabashi, Akinori and Kosaka, Naoki and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {High-speed chemical imaging system based on front-side-illuminated LAPS},
  series = {Sensors and actuators B: Chemical},
  volume    = {182},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077},
  doi       = {10.1016/j.snb.2013.03.016},
  pages     = {315 -- 321},
  year      = {2013},
  abstract  = {The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the spatial distribution of specific ions on the sensing surface. The conventional chemical imaging system based on the light-addressable potentiometric sensor (LAPS), however, required a long time to obtain a chemical image, due to the slow mechanical scan of a single light beam. For high-speed imaging, a plurality of light beams modulated at different frequencies can be employed to measure the ion concentrations simultaneously at different locations on the sensor plate by frequency division multiplex (FDM). However, the conventional measurement geometry of back-side illumination limited the bandwidth of the modulation frequency required for FDM measurement, because of the low-pass filtering characteristics of carrier diffusion in the Si substrate. In this study, a high-speed chemical imaging system based on front-side-illuminated LAPS was developed, which achieved high-speed spatiotemporal recording of pH change at a rate of 70 frames per second.},
  language  = {en}
}
@article{LindenFischoederLaacketal.2013,
  author    = {Linden, A. and Fisch{\"o}der, M. and Laack, Walter van and Staat, Manfred},
  title     = {Einschr{\"a}nkung von Taluskippung und -vorschub durch Sprunggelenkorthesen nach fibularer Bandruptur},
  series = {OUP Zeitschrift f{\"u}r die orthop{\"a}dische und unfallchirurgische Praxis},
  volume    = {2},
  journal   = {OUP Zeitschrift f{\"u}r die orthop{\"a}dische und unfallchirurgische Praxis},
  number    = {6},
  publisher = {Deutscher {\"A}rzte-Verl.},
  address   = {K{\"o}ln},
  isbn      = {2193-5785},
  doi       = {10.3238/oup.2013.0306-0309},
  pages     = {306 -- 309},
  year      = {2013},
  abstract  = {Die fibulare Bandruptur z{\"a}hlt zu einer der am h{\"a}ufigsten auftretenden Verletzungen des Bewegungsapparats. In den meisten F{\"a}llen wird heute die konservativ fr{\"u}hfunktionelle Therapie mit Sprunggelenkorthesen allgemein bevorzugt. Im Rahmen der vorliegenden Studie wurden 14 verschiedene Sprunggelenkorthesen im Hinblick auf ihre Einschr{\"a}nkung von Taluskippung und Talusvorschub untersucht. Zur Simulation einer fibularen Bandruptur wurde ein Unterschenkelmodell aus Holz mit Fußteil, mit angelegten Orthesen in einen Scheuba-Halteapparat eingespannt und mit 150 N seitlich sowie anterior-posterior belastet. Anhand der erstellten "gehaltenen" R{\"o}ntgenaufnahmen konnten Taluskippung und Talusvorschub jeder einzelnen Orthese eindeutig bestimmt werden. Die meisten Orthesen erreichten zufriedenstellende Ergebnisse. Es stellte sich heraus, dass vor allem eine eng anliegende, im Gelenkbereich anatomisch angepasste Form vorteilhaft zu sein scheint.},
  language  = {de}
}
@article{Mueller2013,
  author    = {M{\"u}ller, Thomas},
  title     = {Aufweichung der Gewaltenteilung und Demokratieverlust - Achtung vor dem Parlament. Darstellung einer Rechtsch{\"o}pfung der Exekutive im Umfeld des \S15 AStG},
  series = {Der Betrieb},
  journal   = {Der Betrieb},
  number    = {11},
  publisher = {Fachmedien Otto Schmidt},
  address   = {D{\"u}sseldorf},
  issn      = {0005-9935},
  pages     = {542 -- 548},
  year      = {2013},
  language  = {de}
}
@article{SchneiderSchneider2013,
  author    = {Schneider, Bettina and Schneider, Wilhelm},
  title     = {Rechnungslegung nach IFRS im Vergleich zum HGB},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {536 -- 541},
  year      = {2013},
  language  = {de}
}
@article{Frings2013,
  author    = {Frings, Michael},
  title     = {Begrenzung von vertraglichen H{\"o}chstfristen f{\"u}r Zahlungen und Abnahmen},
  series = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  journal   = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  publisher = {NWB Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {49 -- 56},
  year      = {2013},
  language  = {de}
}
@article{Frings2013,
  author    = {Frings, Michael},
  title     = {{\"A}nderungen zur Haftung und Verg{\"u}tung im Vereins- und Stiftungsrecht},
  series = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  journal   = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  publisher = {NWB Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {693 -- 699},
  year      = {2013},
  language  = {de}
}
@article{Gaiser2013,
  author    = {Gaiser, Lorenz},
  title     = {Rapidshare Kinocharts},
  series = {Idiopendent Lyfestile (Boxhorn ; 27)},
  journal   = {Idiopendent Lyfestile (Boxhorn ; 27)},
  editor    = {Mohr, Klaus},
  publisher = {FH},
  address   = {Aachen},
  issn      = {1864-2535},
  pages     = {150 -- 153},
  year      = {2013},
  language  = {de}
}
@article{Fabo2013,
  author    = {Fabo, Sabine},
  title     = {Pepr{\"a}sentatives D{\"o}sen},
  series = {Idiopendent Lyfestile (Boxhorn ; 27)},
  journal   = {Idiopendent Lyfestile (Boxhorn ; 27)},
  editor    = {Mohr, Klaus},
  publisher = {FH},
  address   = {Aachen},
  issn      = {1864-2535},
  pages     = {134 -- 139},
  year      = {2013},
  language  = {de}
}
@article{Mohr2013,
  author    = {Mohr, Klaus},
  title     = {DEBEDE DE HAKAPE},
  series = {Idiopendent Lyfestile (Boxhorn ; 27)},
  journal   = {Idiopendent Lyfestile (Boxhorn ; 27)},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1864-2535},
  pages     = {40 -- 45},
  year      = {2013},
  language  = {de}
}
@article{FeuchtSchoenbachLanzletal.2013,
  author    = {Feucht, Nikolaus and Sch{\"o}nbach, Etienne Michael and Lanzl, Ines and Kotliar, Konstantin and Lohmann, Chris Patrick and Maier, Mathias},
  title     = {Changes in the foveal microstructure after intravitreal bevacizumab application in patients with retinal vascular disease},
  series = {Clinical Ophthalmology},
  volume    = {7},
  journal   = {Clinical Ophthalmology},
  publisher = {Dove Medical Press},
  address   = {Auckland, New Zealand},
  issn      = {1177-5483},
  pages     = {173 -- 178},
  year      = {2013},
  language  = {en}
}
@article{MurganBeyerKotliaretal.2013,
  author    = {Murgan, Ilina and Beyer, Sonja and Kotliar, Konstantin and Weber, Lutz and Bechtold-Dalla Pozza, Susanne and Dalla Pozza, Robert and Wegner, Aharon and Sitnikova, Diana and Stock, Konrad and Heemann, Uwe and Schmaderer, Christoph and Baumann, M.},
  title     = {Arterial and Retinal Vascular Changes in Hypertensive and Prehypertensive Adolescents},
  series = {American Journal of Hypertension},
  volume    = {26},
  journal   = {American Journal of Hypertension},
  number    = {3},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1941-7225},
  pages     = {400 -- 408},
  year      = {2013},
  language  = {de}
}
@article{KotliarHanssenEberhardtetal.2013,
  author    = {Kotliar, Konstantin and Hanssen, Henner and Eberhardt, Karla and Vilser, Walthard and Schmaderer, Christoph and Halle, Martin and Heemann, Uwe and Baumann, M.},
  title     = {Retinal pulse wave velocity in young male normotensive and mildly hypertensive subjects},
  series = {Microcirculation},
  journal   = {Microcirculation},
  publisher = {Wiley},
  address   = {Malden},
  issn      = {1549-8719},
  year      = {2013},
  language  = {en}
}
@article{ReisertSchneiderGeissleretal.2013,
  author    = {Reisert, Steffen and Schneider, Benno and Geissler, Hanno and Gompel, Matthias van and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Multi-sensor chip for the investigation of different types of metal oxides for the detection of H2O2 in the ppm range},
  series = {physica status solidi (a)},
  volume    = {210},
  journal   = {physica status solidi (a)},
  number    = {5},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  pages     = {898 -- 904},
  year      = {2013},
  abstract  = {In this work, a multi-sensor chip for the investigation of the sensing properties of different types of metal oxides towards hydrogen peroxide in the ppm range is presented. The fabrication process and physical characterization of the multi-sensor chip are described. Pure SnO2 and WO3 as well as Pd- and Pt-doped SnO2 films are characterized in terms of their sensitivity to H2O2. The sensing films have been prepared by drop-coating of water-dispensed nano-powders. A physical characterization, including scanning electron microscopy and X-ray diffraction analysis of the deposited metal-oxide films, was done. From the measurements in hydrogen peroxide atmosphere, it could be shown, that all of the tested metal oxide films are suitable for the detection of H2O2 in the ppm range. The highest sensitivity and reproducibility was achieved using Pt-doped SnO2. Calibration plot of a SnO2, WO3, Pt-, and Pd-doped SnO2 gas sensor for H2O2 concentrations in the ppm range.},
  language  = {en}
}
@article{HennemannKohlReisertetal.2013,
  author    = {Hennemann, J{\"o}rg and Kohl, Claus-Dieter and Reisert, Steffen and Kirchner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Copper oxide nanofibres for detection of hydrogen peroxide vapour at high concentrations},
  series = {physica status solidi (a)},
  volume    = {210},
  journal   = {physica status solidi (a)},
  number    = {5},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201200775},
  pages     = {859 -- 863},
  year      = {2013},
  abstract  = {We present a sensor concept based on copper(II)oxide (CuO) nanofibres for the detection of hydrogen peroxide (H2O2) vapour in the percent per volume (\% v/v) range. The fibres were produced by using the electrospinning technique. To avoid water condensation in the pores, the fibres were initially modified by an exposure to H2S to get an enclosed surface. By a thermal treatment at 350 °C the fibres were oxidised back to CuO. Thereby, the visible pores disappear which was verified by SEM analysis. The fibres show a decrease of resistance with increasing H2O2 concentration which is due to the fact that hydrogen peroxide is an oxidising gas and CuO a p-type semiconductor. The sensor shows a change of resistance within the minute range to the exposure until the maximum concentration of 6.9\% v/v H2O2. At operating temperatures below 450 °C the corresponding sensor response to a concentration of 4.1\% v/v increases. The sensor shows a good reproducibility of the signal at different measurements. CuO seems to be a suitable candidate for the detection of H2O2 vapour at high concentrations. Resistance behaviour of the sensor under exposure to H2O2 vapours between 2.3 and 6.9\% v/v at an operating temperature of 450 °C.},
  language  = {en}
}
@article{KirchnerOberlaenderSusoetal.2013,
  author    = {Kirchner, Patrick and Oberl{\"a}nder, Jan and Suso, Henri-Pierre and Rysstad, Gunnar and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Towards a wireless sensor system for real-time H2O2 monitoring in aseptic food processes},
  series = {Physica status solidi (a)},
  volume    = {210},
  journal   = {Physica status solidi (a)},
  number    = {5},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201200920},
  pages     = {877 -- 883},
  year      = {2013},
  abstract  = {A wireless sensor system based on the industrial ZigBee standard for low-rate wireless networking was developed that enables real-time monitoring of gaseous H2O2 during the package sterilization in aseptic food processes. The sensor system consists of a remote unit connected to a calorimetric gas sensor, which was already established in former works, and an external base unit connected to a laptop computer. The remote unit was built up by an XBee radio frequency (RF) module for data communication and a programmable system-on-chip controller to read out the sensor signal and process the sensor data, whereas the base unit is a second XBee RF module. For the rapid H2O2 detection on various locations inside the package that has to be sterilized, a novel read-out strategy of the calorimetric gas sensor was established, wherein the sensor response is measured within the short sterilization time and correlated with the present H2O2 concentration. In an exemplary measurement application in an aseptic filling machinery, the suitability of the new, wireless sensor system was demonstrated, wherein the influence of the gas velocity on the H2O2 distribution inside a package was determined and verified with microbiological tests.},
  language  = {en}
}
@article{GebhardtFateri2013,
  author    = {Gebhardt, Andreas and Fateri, Miranda},
  title     = {3D printing and its applications},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {10},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-35626},
  year      = {2013},
  abstract  = {Eine zunehmende Anzahl von Artikeln in Publikumszeitschriften und Journalen r{\"u}ckt die direkte Herstellung von Bauteilen und Figuren immer mehr in das Bewusstsein einer breiten {\"O}ffentlichkeit. Leider ergibt sich nur selten ein einigermaßen vollst{\"a}ndiges Bild davon, wie und in welchen Lebensbereichen diese Techniken unseren Alltag ver{\"a}ndern werden. Das liegt auch daran, dass die meisten Artikel sehr technisch gepr{\"a}gt sind und sich nur punktuell auf Beispiele st{\"u}tzen. Dieser Beitrag geht von den Bed{\"u}rfnissen der Menschen aus, wie sie z.B. in der Maslow'schen Bed{\"u}rfnispyramide strukturiert dargestellt sind und unterstreicht dadurch, dass 3D Printing (oder Additive Manufacturing resp. Rapid Prototyping) bereits alle Lebensbereiche erfasst hat und im Begriff ist, viele davon zu revolutionieren.},
  language  = {en}
}
@article{KirchnerOberlaenderSucoetal.2013,
  author    = {Kirchner, Patrick and Oberl{\"a}nder, Jan and Suco, Henri-Pierre and Rysstad, Gunnar and Sch{\"o}ning, Michael Josef},
  title     = {Monitoring the microbicidal effectiveness of gaseous hydrogen peroxide in sterilisation processes by means of a calorimetric gas sensor},
  series = {Food control},
  volume    = {31},
  journal   = {Food control},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-7135},
  doi       = {10.1016/j.foodcont.2012.11.048},
  pages     = {530 -- 538},
  year      = {2013},
  abstract  = {In the present work, a novel method for monitoring sterilisation processes with gaseous H2O2 in combination with heat activation by means of a specially designed calorimetric gas sensor was evaluated. Therefore, the sterilisation process was extensively studied by using test specimens inoculated with Bacillus atrophaeus spores in order to identify the most influencing process factors on its microbicidal effectiveness. Besides the contact time of the test specimens with gaseous H2O2 varied between 0.2 and 0.5 s, the present H2O2 concentration in a range from 0 to 8\% v/v (volume percent) had a strong influence on the microbicidal effectiveness, whereas the change of the vaporiser temperature, gas flow and humidity were almost negligible. Furthermore, a calorimetric H2O2 gas sensor was characterised in the sterilisation process with gaseous H2O2 in a wide range of parameter settings, wherein the measurement signal has shown a linear response against the H2O2 concentration with a sensitivity of 4.75 °C/(\% v/v). In a final step, a correlation model by matching the measurement signal of the gas sensor with the microbial inactivation kinetics was established that demonstrates its suitability as an efficient method for validating the microbicidal effectiveness of sterilisation processes with gaseous H2O2.},
  language  = {en}
}
@article{KowalskiMcElwaine2013,
  author    = {Kowalski, Julia and McElwaine, Jim N.},
  title     = {Shallow two-component gravity-driven flows with vertical variation},
  series = {Journal of Fluid Mechanics},
  volume    = {714},
  journal   = {Journal of Fluid Mechanics},
  publisher = {Cambridge Univ. Press},
  address   = {Cambridge},
  isbn      = {0022-1120},
  pages     = {434 -- 462},
  year      = {2013},
  language  = {en}
}
@article{BassamDigelHescheleretal.2013,
  author    = {Bassam, Rasha and Digel, Ilya and Hescheler, J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard},
  title     = {Effects of spermine NONOate and ATP on protein aggregation: light scattering evidences},
  series = {BMC Biophysics},
  journal   = {BMC Biophysics},
  publisher = {BioMed Central},
  address   = {London},
  isbn      = {2046-1682},
  url       = {http://nbn-resolving.de/10.1186/2046-1682-6-1},
  pages     = {1 -- 14},
  year      = {2013},
  language  = {en}
}
@article{WernerTakenagaTakietal.2013,
  author    = {Werner, Frederik and Takenaga, Shoko and Taki, Hidenori and Sawada, Kazuaki and Sch{\"o}ning, Michael Josef},
  title     = {Comparison of label-free ACh-imaging sensors based on CCD and LAPS},
  series = {Sensors and Actuators B: Chemical (2012)},
  volume    = {177},
  journal   = {Sensors and Actuators B: Chemical (2012)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0925-4005},
  pages     = {745 -- 752},
  year      = {2013},
  abstract  = {Semiconductor-based chemical imaging sensors, like the light-addressable potentiometric sensor (LAPS) or the pH-imaging sensor based on a charge-coupled device (CCD), are becoming a powerful tool for label-free imaging of biological phenomena. We have proposed a polyion-based enzymatic membrane to develop an acetylcholine (ACh) imaging sensor for neural cell-activity observations. In this study, a CCD-type ACh-imaging sensor and a LAPS-type ACh-imaging sensor were fabricated and the prospect of both sensors was clarified by making a comparison of their basic characteristics.},
  language  = {en}
}
@article{TranStaat2013,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {An Edge-Based Smoothed Finite Element Method for Primal-Dual Shakedown Analysis of Structures Under Uncertainties},
  series = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  journal   = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  publisher = {Springer},
  address   = {Dordrecht},
  isbn      = {978-94-007-5424-9},
  pages     = {89 -- 102},
  year      = {2013},
  language  = {en}
}
@article{PhamStaat2013,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {An Upper Bound Algorithm for Limit and Shakedown Analysis of Bounded Linearly Kinematic Hardening Structures},
  series = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  journal   = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  publisher = {Springer},
  address   = {Dordrecht},
  isbn      = {978-94-007-5424-9},
  pages     = {71 -- 87},
  year      = {2013},
  language  = {en}
}
@article{BohrnStuetzFleischeretal.2013,
  author    = {Bohrn, Ulrich and St{\"u}tz, Evamaria and Fleischer, Maximilian and Sch{\"o}ning, Michael Josef and Wagner, Patrick},
  title     = {Using a cell-based gas biosensor for investigation of adverse effects of acetone vapors in vitro},
  series = {Biosensors and Bioelectronics. 40 (2013), H. 1},
  journal   = {Biosensors and Bioelectronics. 40 (2013), H. 1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0956-5663},
  pages     = {393 -- 400},
  year      = {2013},
  language  = {en}
}
@article{BaeckerRakowskiPoghossianetal.2013,
  author    = {B{\"a}cker, Matthias and Rakowski, D. and Poghossian, Arshak and Biselli, Manfred and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Chip-based amperometric enzyme sensor system for monitoring of bioprocesses by flow-injection analysis},
  series = {Journal of Biotechnology},
  volume    = {163},
  journal   = {Journal of Biotechnology},
  number    = {4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0168-1656},
  doi       = {10.1016/j.jbiotec.2012.03.014},
  pages     = {371 -- 376},
  year      = {2013},
  abstract  = {A microfluidic chip integrating amperometric enzyme sensors for the detection of glucose, glutamate and glutamine in cell-culture fermentation processes has been developed. The enzymes glucose oxidase, glutamate oxidase and glutaminase were immobilized by means of cross-linking with glutaraldehyde on platinum thin-film electrodes integrated within a microfluidic channel. The biosensor chip was coupled to a flow-injection analysis system for electrochemical characterization of the sensors. The sensors have been characterized in terms of sensitivity, linear working range and detection limit. The sensitivity evaluated from the respective peak areas was 1.47, 3.68 and 0.28 μAs/mM for the glucose, glutamate and glutamine sensor, respectively. The calibration curves were linear up to a concentration of 20 mM glucose and glutamine and up to 10 mM for glutamate. The lower detection limit amounted to be 0.05 mM for the glucose and glutamate sensor, respectively, and 0.1 mM for the glutamine sensor. Experiments in cell-culture medium have demonstrated a good correlation between the glutamate, glutamine and glucose concentrations measured with the chip-based biosensors in a differential-mode and the commercially available instrumentation. The obtained results demonstrate the feasibility of the realized microfluidic biosensor chip for monitoring of bioprocesses.},
  language  = {en}
}
@article{AkimbekovMansurovJandosovetal.2013,
  author    = {Akimbekov, Nuraly Shardarbekovich and Mansurov, Zulkhair and Jandosov, J. and Digel, Ilya and Gossmann, Matthias and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A.},
  title     = {Wound healing activity of carbonized rice husk},
  publisher = {Trans Tech Publications, Switzerland},
  address   = {B{\"a}ch},
  year      = {2013},
  abstract  = {The carbonized rice husk (CRH) was evaluated for its wound healing activity in rats using excision models. In this study, the influences of CRH on wound healing in rat skin in vivo and cellular behavior of human dermal fibroblasts in vitro were investigated. The obtained results showed that the CRH treatment promoted wound epithelization in rats and exhibited moderate inhibition of cell proliferation in vitro. CRH with lanolin oil treated wounds were found to epithelize faster as compared to controls.},
  subject      = {Wundheilung},
  language  = {en}
}