TY  - JOUR
A1  - Yoshinobu, Tatsuo
A1  - Miyamoto, Ko-ichiro
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Recent developments of chemical imaging sensor systems based on the principle of the light-addressable potentiometric sensor
JF  - Sensors and actuators B: Chemical
N2  - The light-addressable potentiometric sensor (LAPS) is an electrochemical sensor with a field-effect structure to detect the variation of the Nernst potential at its sensor surface, the measured area on which is defined by illumination. Thanks to this light-addressability, the LAPS can be applied to chemical imaging sensor systems, which can visualize the two-dimensional distribution of a particular target ion on the sensor surface. Chemical imaging sensor systems are expected to be useful for analysis of reaction and diffusion in various electrochemical and biological samples. Recent developments of LAPS-based chemical imaging sensor systems, in terms of the spatial resolution, measurement speed, image quality, miniaturization and integration with microfluidic devices, are summarized and discussed.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.snb.2014.09.002
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
VL  - 207, Part B
SP  - 926
EP  - 932
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Bing, Yu
A1  - Wagner, Torsten
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
T1  - Visualization of Defects on a Cultured Cell Layer by Utilizing Chemical Imaging Sensor
JF  - Procedia Engineering
N2  - The chemical imaging sensor is a field-effect sensor which is able to visualize both the distribution of ions (in LAPS mode) and the distribution of impedance (in SPIM mode) inthe sample. In this study, a novel wound-healing assay is proposed, in which the chemical imaging sensor operated in SPIM mode is applied to monitor the defect of a cell layer brought into proximity of the sensing surface.A reduced impedance inside the defect, which was artificially formed ina cell layer, was successfully visualized in a photocurrent image.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.806
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 936
EP  - 939
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamato, Ko-ichiro
A1  - Sakakita, Sakura
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface
JF  - Electrochimica Acta
N2  - The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.electacta.2015.07.184
SN  - 0013-4686
VL  - 183
SP  - 137
EP  - 142
PB  - Elsevier
CY  - Amsterdam
ER  -