TY  - CHAP
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Zander, W.
A1  - Schubert, J.
A1  - Sukoyan, L. H.
A1  - Begoyan, V.
A1  - Buniatyan, V. V.
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Chemische Sensoren mit Bariumstrontiumtitanat als funktionelle Schicht zur Multiparameterdetektion
T2  - 11. Dresdner Sensor-Symposium : 9.-11.12.2013
Y1  - 2013
SN  - 978-3-9813484-5-3
SP  - 368
EP  - 372
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Kerroumi, Iman
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Zander, Willi
A1  - Schubert, Jürgen
A1  - Buniatyan, Vahe V.
A1  - Martirosyan, Norayr W.
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Multiparameter sensor chip with Barium Strontium Titanate as multipurpose material
JF  - Electroanalysis
N2  - It is well known that biochemical and biotechnological processes are strongly dependent and affected by a variety of physico-chemical parameters such as pH value, temperature, pressure and electrolyte conductivity. Therefore, these quantities have to be monitored or controlled in order to guarantee a stable process operation, optimization and high yield. In this work, a sensor chip for the multiparameter detection of three physico-chemical parameters such as electrolyte conductivity, pH and temperature is realized using barium strontium titanate (BST) as multipurpose material. The chip integrates a capacitively coupled four-electrode electrolyte-conductivity sensor, a capacitive field-effect pH sensor and a thin-film Pt-temperature sensor. Due to the multifunctional properties of BST, it is utilized as final outermost coating layer of the processed sensor chip and serves as passivation and protection layer as well as pH-sensitive transducer material at the same time. The results of testing of the individual sensors of the developed multiparameter sensor chip are presented. In addition, a quasi-simultaneous multiparameter characterization of the sensor chip in buffer solutions with different pH value and electrolyte conductivity is performed. To study the sensor behavior and the suitability of BST as multifunctional material under harsh environmental conditions, the sensor chip was exemplarily tested in a biogas digestate.
Y1  - 2014
U6  - http://dx.doi.org/10.1002/elan.201400076
SN  - 1521-4109 (E-Journal); 1040-0397 (Print)
VL  - 26
IS  - 5
SP  - 980
EP  - 987
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Chaudhuri, S.
A1  - Zander, W.
A1  - Schubert, J.
A1  - Begoyan, V. K.
A1  - Buniatyan, V. V.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Capacitively coupled electrolyte-conductivity sensor based on high-k material of barium strontium titanate
JF  - Sensors and actuators. B: Chemical
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.snb.2014.02.103
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
IS  - 198
SP  - 102
EP  - 109
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Reisert, Steffen
A1  - Schubert, J.
A1  - Zander, W.
A1  - Begoyan, V. K.
A1  - Buniatyan, V. V.
A1  - Schöning, Michael Josef
T1  - Chemical sensors based on a high-k perovskite oxide of barium strontium titanate
JF  - Procedia Engineering
N2  - High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors for liquids. In this work, BST films have been applied as a sensitive transducer material for a label-free detection of adsorbed charged macromolecules (positively charged polyelectrolytes) and concentration of hydrogen peroxide vapor as well as protection insulator layer for a contactless electrolyte-conductivity sensor. The experimental results of characterization of individual sensors are presented. Special emphasis is devoted towards the development of a capacitively-coupled contactless electrolyte-conductivity sensor.
KW  - barium strontium titanate
KW  - high-k material
KW  - contactless conductivity sensor
KW  - multi-functional material
KW  - hydrogen peroxide
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.proeng.2014.11.258
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 28
EP  - 31
PB  - Elsevier
CY  - Amsterdam
ER  -