@article{JungStaatMueller2013,
  author    = {Jung, Alexander and Staat, Manfred and M{\"u}ller, Wolfram},
  title     = {Flight style optimization in ski jumping on normal, large, and ski flying hills},
  series = {Journal of biomechanics},
  volume    = {Vol. 47},
  journal   = {Journal of biomechanics},
  number    = {Iss. 3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2380 (E-Journal); 0021-9290 (Print)},
  pages     = {716 -- 722},
  year      = {2013},
  language  = {en}
}
@article{PhamStaat2014,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {FEM-based shakedown analysis of hardening structures},
  series = {Asia Pacific journal on computational engineering},
  journal   = {Asia Pacific journal on computational engineering},
  number    = {1},
  publisher = {SpringerOpen},
  address   = {Berlin},
  issn      = {2196-1166 (E-Journal)},
  doi       = {10.1186/2196-1166-1-4},
  pages     = {Article No. 4},
  year      = {2014},
  abstract  = {This paper develops a new finite element method (FEM)-based upper bound algorithm for limit and shakedown analysis of hardening structures by a direct plasticity method. The hardening model is a simple two-surface model of plasticity with a fixed bounding surface. The initial yield surface can translate inside the bounding surface, and it is bounded by one of the two equivalent conditions: (1) it always stays inside the bounding surface or (2) its centre cannot move outside the back-stress surface. The algorithm gives an effective tool to analyze the problems with a very high number of degree of freedom. Our numerical results are very close to the analytical solutions and numerical solutions in literature.},
  language  = {en}
}
@article{CiobanuStaatRahimi2008,
  author    = {Ciobanu, Octavian and Staat, Manfred and Rahimi, Alireza},
  title     = {The use of open source software in biomechanical finite element analysis},
  series = {Buletinul Institutului Politehnic din Ia{\c{s}}i / Universitatea Tehnică Gh. Asachi, Ia{\c{s}}i Secţia 5, Construcţii de ma{\c{s}}ini = Machine construction = Bulletin of the Polytechnic Institute of Jassy = Izvestija Jasskogo Politechničeskogo Instituta},
  volume    = {54},
  journal   = {Buletinul Institutului Politehnic din Ia{\c{s}}i / Universitatea Tehnică Gh. Asachi, Ia{\c{s}}i Secţia 5, Construcţii de ma{\c{s}}ini = Machine construction = Bulletin of the Polytechnic Institute of Jassy = Izvestija Jasskogo Politechničeskogo Instituta},
  number    = {7/8},
  issn      = {1011-2855},
  pages     = {213 -- 220},
  year      = {2008},
  language  = {en}
}
@article{DuongNguyenStaat2015,
  author    = {Duong, Minh Tuan and Nguyen, Nhu Huynh and Staat, Manfred},
  title     = {Physical response of hyperelastic models for composite materials and soft tissues},
  series = {Asia pacific journal on computational engineering},
  volume    = {2},
  journal   = {Asia pacific journal on computational engineering},
  number    = {3 (December 2015)},
  issn      = {2196-1166},
  doi       = {10.1186/s40540-015-0015-x},
  pages     = {1 -- 18},
  year      = {2015},
  language  = {en}
}
@inproceedings{JungStaatMueller2016,
  author    = {Jung, Alexander and Staat, Manfred and M{\"u}ller, Wolfram},
  title     = {Effect of wind on flight style optimisation in ski jumping},
  series = {15th International Symposium on Computer Simulation in Biomechanics ; July 9th-11th 2015, Edinburgh, UK},
  booktitle = {15th International Symposium on Computer Simulation in Biomechanics ; July 9th-11th 2015, Edinburgh, UK},
  publisher = {The University of Edinburgh ; Loughborough University},
  address   = {Edinburgh},
  pages     = {53 -- 54},
  year      = {2016},
  language  = {en}
}
@article{AndingTabazaStaatetal.2013,
  author    = {Anding, Ralf and Tabaza, Ruth and Staat, Manfred and Trenz, Eva and Lohmann, Philipp and Klinge, Uwe and Kirschner-Hermanns, Ruth},
  title     = {Introducing a method of in vitro testing of different anchoring systems used for female incontinence and prolapse surgery},
  series = {BioMed research international},
  volume    = {Vol. 2013},
  journal   = {BioMed research international},
  issn      = {1110-7251 (E-Journal); 2314-6141 (E-Journal); 1110-7243 (Print); 2314-6133 (Print)},
  pages     = {Article ID 401417},
  year      = {2013},
  language  = {en}
}
@article{FrotscherStaat2014,
  author    = {Frotscher, Ralf and Staat, Manfred},
  title     = {Stresses produced by different textile mesh implants in a tissue equivalent},
  series = {BioNanoMaterials},
  volume    = {15},
  journal   = {BioNanoMaterials},
  number    = {1-2},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {2191-4672 (E-Journal); 2193-066X (E-Journal); 0011-8656 (Print); 1616-0177 (Print); 2193-0651 (Print)},
  doi       = {10.1515/bnm-2014-0003},
  pages     = {25 -- 30},
  year      = {2014},
  abstract  = {Two single-incision mini-slings used for treating urinary incontinence in women are compared with respect to the stresses they produce in their surrounding tissue. In an earlier paper we experimentally observed that these implants produce considerably different stress distributions in a muscle tissue equivalent. Here we perform 2D finite element analyses to compare the shear stresses and normal stresses in the tissue equivalent for the two meshes and to investigate their failure behavior. The results clearly show that the Gynecare TVT fails for increasing loads in a zipper-like manner because it gradually debonds from the surrounding tissue. Contrary to that, the tissue at the ends of the DynaMesh-SIS direct may rupture but only at higher loads. The simulation results are in good agreement with the experimental observations thus the computational model helps to interpret the experimental results and provides a tool for qualitative evaluation of mesh implants.},
  language  = {en}
}
@incollection{KnottSofroniaGerressenetal.2014,
  author    = {Knott, Thomas C. and Sofronia, Raluca E. and Gerressen, Marcus and Law, Yuen and Davidescu, Arjana and Savii, George G. and Gatzweiler, Karl-Heinz and Staat, Manfred and Kuhlen, Torsten W.},
  title     = {Preliminary bone sawing model for a virtual reality-based training simulator of bilateral sagittal split osteotomy},
  series = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)},
  booktitle = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12057-7 (Online)},
  doi       = {10.1007/978-3-319-12057-7_1},
  pages     = {1 -- 10},
  year      = {2014},
  abstract  = {Successful bone sawing requires a high level of skill and experience, which could be gained by the use of Virtual Reality-based simulators. A key aspect of these medical simulators is realistic force feedback. The aim of this paper is to model the bone sawing process in order to develop a valid training simulator for the bilateral sagittal split osteotomy, the most often applied corrective surgery in case of a malposition of the mandible. Bone samples from a human cadaveric mandible were tested using a designed experimental system. Image processing and statistical analysis were used for the selection of four models for the bone sawing process. The results revealed a polynomial dependency between the material removal rate and the applied force. Differences between the three segments of the osteotomy line and between the cortical and cancellous bone were highlighted.},
  language  = {en}
}
@incollection{TranStaat2015,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Uncertainty multimode failure and shakedown analysis of shells},
  series = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  booktitle = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)},
  doi       = {10.1007/978-3-319-12928-0_14},
  pages     = {279 -- 298},
  year      = {2015},
  abstract  = {This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.},
  language  = {en}
}
@article{FrotscherKochStaat2015,
  author    = {Frotscher, Ralf and Koch, Jan-Peter and Staat, Manfred},
  title     = {Computational investigation of drug action on human-induced stem cell derived cardiomyocytes},
  series = {Journal of biomechanical engineering},
  volume    = {Vol. 137},
  journal   = {Journal of biomechanical engineering},
  number    = {iss. 7},
  publisher = {ASME},
  address   = {New York},
  issn      = {1528-8951 (E-Journal); 0148-0731 (Print)},
  doi       = {10.1115/1.4030173},
  pages     = {071002-1 -- 071002-7},
  year      = {2015},
  language  = {en}
}
@article{DuongNguyenTranetal.2015,
  author    = {Duong, Minh Tuan and Nguyen, Nhu Huynh and Tran, Thanh Ngoc and Tolba, R. H. and Staat, Manfred},
  title     = {Influence of refrigerated storage on tensile mechanical properties of porcine liver and spleen},
  series = {International biomechanics},
  volume    = {Vol. 2},
  journal   = {International biomechanics},
  number    = {Iss. 1},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {2333-5432},
  doi       = {10.1080/23335432.2015.1049295},
  pages     = {79 -- 88},
  year      = {2015},
  language  = {en}
}
@inproceedings{FrotscherStaat2015,
  author    = {Frotscher, Ralf and Staat, Manfred},
  title     = {An electromechanical model for cardiac tissue constructs},
  series = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  booktitle = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  organization    = {ECCOMAS Young Investigators Conference <3, 2015, Aachen>},
  pages     = {1 -- 4},
  year      = {2015},
  language  = {en}
}
@inproceedings{BhattaraiFrotscherStaat2015,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Staat, Manfred},
  title     = {Biomechanical study of the female pelvic floor dysfunction using the finite element method},
  series = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  booktitle = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  organization    = {ECCOMAS Young Investigators Conference <3, 2015, Aachen>},
  pages     = {1 -- 4},
  year      = {2015},
  language  = {en}
}
@inproceedings{DuongNguyenStaat2015,
  author    = {Duong, Minh Tuan and Nguyen, N. H. and Staat, Manfred},
  title     = {Modeling and simulation of a growing mass by the Smoothed Finite Element Method (SFEM)},
  series = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  booktitle = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  organization    = {ECCOMAS Young Investigators Conference <3, 2015, Aachen>},
  pages     = {1 -- 4},
  year      = {2015},
  language  = {en}
}
@inproceedings{PhamStaat2015,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {A simplification for shakedown analysis of hardening structures},
  series = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  booktitle = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  organization    = {ECCOMAS Young Investigators Conference <3, 2015, Aachen>},
  pages     = {1 -- 4},
  year      = {2015},
  language  = {en}
}
@article{HacklMuellerStaatetal.2016,
  author    = {Hackl, Michael and M{\"u}ller, Lars-Peter and Staat, Manfred and Kahmann, Stephanie Lucina and Wegmann, Kilian},
  title     = {Proximal phalangeal neck fractures of the hand — a biomechanical comparison of three fixation techniques},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {148 -- 149},
  year      = {2016},
  abstract  = {Plate osteosynthesis of displaced proximal phalangeal neck fractures of the hand allows early mobilization due to a stable internal fixation. Nevertheless, joint stiffness—because of soft tissue irritation—represents a common complication leading to high complication rates. Del Pinal et al. recently reported promising clinical results for a new, minimally invasive fixation technique with a cannulated headless intramedullary compression screw. Hence, the aim of this study was to compare plate fixation of proximal phalangeal neck fractures to less two less invasive techniques: Crossed k-wire fixation and intramedullary screw fixation. We hypothesized that these fixation techniques provide inferior stability when compared to plate osteosynthesis.},
  language  = {en}
}
@article{HacklKahmannWegmannetal.2016,
  author    = {Hackl, Michael and Kahmann, Stephanie Lucina and Wegmann, Kilian and Ries, Christian and Staat, Manfred and M{\"u}ller, Lars-Peter},
  title     = {Shortening osteotomy of the proximal radius — a treatment option for isolated osteoarthritis of the lateral column of the elbow joint?},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {128 -- 129},
  year      = {2016},
  abstract  = {Treatment of posttraumatic osteoarthritis of the radial column of the elbow joint remains a challenging yet common issue. While partial joint replacement leads to high revision rates, radial head excision has shown to severely increase joint instability. Shortening osteotomy of the radius could be an option to decrease the contact pressure of the radiohumeral joint and thereby pain levels without causing valgus instability. Hence, the aim of this biomechanical study was to evaluate the effects of radial shortening on axial load distribution and valgus stability of the elbow joint.},
  language  = {en}
}
@article{HacklLeschingerStaatetal.2016,
  author    = {Hackl, Michael and Leschinger, T. and Staat, Manfred and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {Reconstruction of the interosseous membrane in the Essex Lopresti lesion — a biomechanical evaluation},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {130 -- 131},
  year      = {2016},
  abstract  = {Surgical reconstruction of the interosseous membrane (IOM) could restore longitudinal forearm stability to avoid persisting disability due to capituloradial and ulnocarpal impingement in Essex Lopresti lesions. This biomechanical study aimed to assess longitudinal forearm stability of intact specimens, after sectioning of the IOM and after reconstruction with a TightRope construct using either a single or double bundle technique.},
  language  = {en}
}
@article{WegmannHacklStaatetal.2016,
  author    = {Wegmann, Kilian and Hackl, Michael and Staat, Manfred and Mayer, Katharina and M{\"u}ller, Lars-Peter},
  title     = {Double plate osteosynthesis of proximal ulna fractures: biomechanical and clinical results},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4079-0},
  pages     = {58 -- 59},
  year      = {2016},
  abstract  = {While plate fixation of proximal ulna fractures might lead to superior clinical results compared to tension band wiring, regular plates represent an established risk factor for wound complications. The olecranon double plates (Medartis, Basel, CH) might decrease complications related to the osteosynthesis because of their low profile and better anatomical fit. This study aimed to evaluate the biomechanical performance and clinical results of the olecranon double plates.},
  language  = {en}
}
@inproceedings{BhattaraiStaat2016,
  author    = {Bhattarai, Aroj and Staat, Manfred},
  title     = {Female pelvic floor dysfunction: progress weakening of the support system},
  series = {1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen},
  booktitle = {1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen},
  editor    = {Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  doi       = {10.17185/duepublico/40821},
  pages     = {11 -- 12},
  year      = {2016},
  abstract  = {The structure of the female pelvic floor (PF) is an inter-related system of bony pelvis,muscles, pelvic organs, fascias, ligaments, and nerves with multiple functions. Mechanically, thepelvic organ support system are of two types: (I) supporting system of the levator ani (LA) muscle,and (II) the suspension system of the endopelvic fascia condensation [1], [2]. Significantdenervation injury to the pelvic musculature, depolimerization of the collagen fibrils of the softvaginal hammock, cervical ring and ligaments during pregnancy and vaginal delivery weakens thenormal functions of the pelvic floor. Pelvic organ prolapse, incontinence, sexual dysfunction aresome of the dysfunctions which increases progressively with age and menopause due toweakened support system according to the Integral theory [3]. An improved 3D finite elementmodel of the female pelvic floor as shown in Fig. 1 is constructed that: (I) considers the realisticsupport of the organs to the pelvic side walls, (II) employs the improvement of our previous FEmodel [4], [5] along with the patient based geometries, (III) incorporates the realistic anatomy andboundary conditions of the endopelvic (pubocervical and rectovaginal) fascia, and (IV) considersvarying stiffness of the endopelvic fascia in the craniocaudal direction [3]. Several computationsare carried out on the presented computational model with healthy and damaged supportingtissues, and comparisons are made to understand the physiopathology of the female PF disorders.},
  language  = {en}
}
@inproceedings{JungStaat2016,
  author    = {Jung, Alexander and Staat, Manfred},
  title     = {Computing olympic gold: Ski jumping as an example},
  series = {1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen},
  booktitle = {1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen},
  editor    = {Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-06-6},
  doi       = {10.17185/duepublico/40821},
  pages     = {54 -- 55},
  year      = {2016},
  language  = {en}
}
@inproceedings{KahmannHacklWegmannetal.2016,
  author    = {Kahmann, Stephanie and Hackl, Michael and Wegmann, Kilian and M{\"u}ller, Lars-Peter and Staat, Manfred},
  title     = {Impact of a proximal radial shortening osteotomy on the distribution of forces and the stability of the elbow},
  series = {1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen},
  booktitle = {1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen},
  editor    = {Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  doi       = {10.17185/duepublico/40821},
  pages     = {7 -- 8},
  year      = {2016},
  abstract  = {The human arm consists of the humerus (upper arm), the medial ulna and the lateral radius (forearm). The joint between the humerus and the ulna is called humeroulnar joint and the joint between the humerus and the radius is called humeroradial joint. Lateral and medial collateral ligaments stabilize the elbow. Statistically, 2.5 out of 10,000 people suffer from radial head fractures [1]. In these fractures the cartilage is often affected. Caused by the injured cartilage, degenerative diseases like posttraumatic arthrosis may occur. The resulting pain and reduced range of motion have an impact on the patient's quality of life. Until now, there has not been a treatment which allows typical loads in daily life activities and offers good long-term results. A new surgical approach was developed with the motivation to reduce the progress of the posttraumatic arthrosis. Here, the radius is shortened by 3 mm in the proximal part [2]. By this means, the load of the radius is intended to be reduced due to a load shift to the ulna. Since the radius is the most important stabilizer of the elbow it has to be confirmed that the stability is not affected. In the first test (Fig. 1 left), pressure distributions within the humeroulnar and humeroradial joints a native and a shortened radius were measured using resistive pressure sensors (I5076 and I5027, Tekscan, USA). The humerus was loaded axially in a tension testing machine (Z010, Zwick Roell, Germany) in 50 N steps up to 400 N. From the humerus the load is transmitted through both the radius and the ulna into the hand which is fixed on the ground. In the second test (Fig. 1 right), the joint stability was investigated using a digital image correlation system to measure the displacement of the ulna. Here, the humerus is fixed with a desired flexion angle and the unconstrained forearm lies on the ground. A rope connects the load actuator with a hook fixed in the ulna. A guide roller is used so that the rope pulls the ulna horizontally when a tensile load is applied. This creates a moment about the elbow joint with a maximum value of 7.5 Nm. Measurements were performed with varying flexion angles (0°, 30°, 60°, 90°, 120°). For both tests and each measurement, seven specimens were used. Student's t-test was employed to determine whether the mean values of the measurements in native specimen and operated specimens differ significantly.},
  language  = {en}
}
@inproceedings{TranTranMatthiesetal.2016,
  author    = {Tran, Ngoc Trinh and Tran, Thanh Ngoc and Matthies, H. G. and Stavroulakis, G. E. and Staat, Manfred},
  title     = {Shakedown analysis of plate bending analysis under stochastic uncertainty by chance constrained programming},
  series = {ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece, 5-10 June 2016},
  booktitle = {ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece, 5-10 June 2016},
  editor    = {Papadrakakis, M.},
  pages     = {13 S.},
  year      = {2016},
  language  = {en}
}
@article{HacklAndermahrStaatetal.2017,
  author    = {Hackl, M. and Andermahr, J. and Staat, Manfred and Bremer, I. and Borggrefe, J. and Prescher, A. and M{\"u}ller, L. P. and Wegmann, K.},
  title     = {Suture button reconstruction of the central band of the interosseous membrane in Essex-Lopresti lesions: a comparative biomechanical investigation},
  series = {The Journal of Hand Surgery (European Volume)},
  volume    = {42},
  journal   = {The Journal of Hand Surgery (European Volume)},
  number    = {4},
  publisher = {Sage},
  address   = {London},
  issn      = {2043-6289 (Online)},
  doi       = {10.1177/1753193416665943},
  pages     = {370 -- 376},
  year      = {2017},
  language  = {en}
}
@inproceedings{BhattaraiFrotscherStaat2016,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Staat, Manfred},
  title     = {Significance of fibre geometry on passive-active response of pelvic muscles to evaluate pelvic dysfunction},
  series = {BioMedWomen: Proceedings of the international conference on clinical and bioengineering for women's health},
  booktitle = {BioMedWomen: Proceedings of the international conference on clinical and bioengineering for women's health},
  editor    = {Natal Jorge, Renato},
  publisher = {CRC Press},
  address   = {Boca Raton},
  isbn      = {978-1-138-02910-1},
  pages     = {185 -- 188},
  year      = {2016},
  language  = {en}
}
@article{Staat2012,
  author    = {Staat, Manfred},
  title     = {Limit and shakedown analysis under uncertainty},
  series = {Tap chi Khoa hoc \& ung dung - Dai hoc Ton Duc Thang},
  volume    = {19},
  journal   = {Tap chi Khoa hoc \& ung dung - Dai hoc Ton Duc Thang},
  pages     = {45 -- 47},
  year      = {2012},
  language  = {en}
}
@article{JungMuellerStaat2018,
  author    = {Jung, Alexander and M{\"u}ller, Wolfram and Staat, Manfred},
  title     = {Wind and fairness in ski jumping: A computer modelling analysis},
  series = {Journal of Biomechanics},
  journal   = {Journal of Biomechanics},
  number    = {75},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2018.05.001},
  pages     = {147 -- 153},
  year      = {2018},
  abstract  = {Wind is closely associated with the discussion of fairness in ski jumping. To counter-act its influence on the jump length, the International Ski Federation (FIS) has introduced a wind compensation approach. We applied three differently accurate computer models of the flight phase with wind (M1, M2, and M3) to study the jump length effects of various wind scenarios. The previously used model M1 is accurate for wind blowing in direction of the flight path, but inaccuracies are to be expected for wind directions deviating from the tangent to the flight path. M2 considers the change of airflow direction, but it does not consider the associated change in the angle of attack of the skis which additionally modifies drag and lift area time functions. M3 predicts the length effect for all wind directions within the plane of the flight trajectory without any mathematical simplification. Prediction errors of M3 are determined only by the quality of the input data: wind velocity, drag and lift area functions, take-off velocity, and weight. For comparing the three models, drag and lift area functions of an optimized reference jump were used. Results obtained with M2, which is much easier to handle than M3, did not deviate noticeably when compared to predictions of the reference model M3. Therefore, we suggest to use M2 in future applications. A comparison of M2 predictions with the FIS wind compensation system showed substantial discrepancies, for instance: in the first flight phase, tailwind can increase jump length, and headwind can decrease it; this is opposite of what had been anticipated before and is not considered in the current wind compensation system in ski jumping.},
  language  = {en}
}
@article{JungStaatMueller2018,
  author    = {Jung, Alexander and Staat, Manfred and M{\"u}ller, Wolfram},
  title     = {Corrigendum to "Flight style optimization in ski jumping on normal, large, and ski flying hills" [J. Biomech 47 (2014) 716-722]},
  series = {Journals of Biomechanics},
  journal   = {Journals of Biomechanics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2018.02.001},
  pages     = {313},
  year      = {2018},
  language  = {en}
}
@inproceedings{TranMatthiesStavroulakisetal.2018,
  author    = {Tran, Ngoc Trinh and Matthies, Hermann G. and Stavroulakis, Georgios Eleftherios and Staat, Manfred},
  title     = {Direct plastic structural design by chance constrained programming},
  series = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  booktitle = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  pages     = {12 Seiten},
  year      = {2018},
  abstract  = {We propose a stochastic programming method to analyse limit and shakedown of structures under random strength with lognormal distribution. In this investigation a dual chance constrained programming algorithm is developed to calculate simultaneously both the upper and lower bounds of the plastic collapse limit or the shakedown limit. The edge-based smoothed finite element method (ES-FEM) using three-node linear triangular elements is used.},
  language  = {en}
}
@inproceedings{KahmannUschokWegmannetal.2018,
  author    = {Kahmann, Stephanie Lucina and Uschok, Stephan and Wegmann, Kilian and M{\"u}ller, Lars-P. and Staat, Manfred},
  title     = {Biomechanical multibody model with refined kinematics of the elbow},
  series = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  booktitle = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  pages     = {11 Seiten},
  year      = {2018},
  abstract  = {The overall objective of this study is to develop a new external fixator, which closely maps the native kinematics of the elbow to decrease the joint force resulting in reduced rehabilitation time and pain. An experimental setup was designed to determine the native kinematics of the elbow during flexion of cadaveric arms. As a preliminary study, data from literature was used to modify a published biomechanical model for the calculation of the joint and muscle forces. They were compared to the original model and the effect of the kinematic refinement was evaluated. Furthermore, the obtained muscle forces were determined in order to apply them in the experimental setup. The joint forces in the modified model differed slightly from the forces in the original model. The muscle force curves changed particularly for small flexion angles but their magnitude for larger angles was consistent.},
  language  = {en}
}
@incollection{FrotscherStaat2018,
  author    = {Frotscher, Ralf and Staat, Manfred},
  title     = {Towards Patient-Specific Computational Modeling of hiPS-Derived Cardiomyocyte Function and Drug Action},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_10},
  pages     = {233 -- 250},
  year      = {2018},
  abstract  = {Human-induced pluripotent stem cell-derived cardiomyocytes (hiPS-CM) today are widely used for the investigation of normal electromechanical cardiac function, of cardiac medication and of mutations. Computational models are thus established that simulate the behavior of this kind of cells. This section first motivates the modeling of hiPS-CM and then presents and discusses several modeling approaches of microscopic and macroscopic constituents of human-induced pluripotent stem cell-derived and mature human cardiac tissue. The focus is led on the mapping of the computational results one can achieve with these models onto mature human cardiomyocyte models, the latter being the real matter of interest. Model adaptivity is the key feature that is discussed because it opens the way for modeling various biological effects like biological variability, medication, mutation and phenotypical expression. We compare the computational with experimental results with respect to normal cardiac function and with respect to inotropic and chronotropic drug effects. The section closes with a discussion on the status quo of the specificity of computational models and on what challenges have to be solved to reach patient-specificity.},
  language  = {en}
}
@inproceedings{BhattaraiStaat2018,
  author    = {Bhattarai, Aroj and Staat, Manfred},
  title     = {Pectopexy to repair vaginal vault prolapse: a finite element approach},
  series = {Proceedings CMBBE 2018},
  booktitle = {Proceedings CMBBE 2018},
  editor    = {Fernandes, P.R. and Tavares, J. M.},
  year      = {2018},
  abstract  = {The vaginal prolapse after hysterectomy (removal of the uterus) is often associated with the prolapse of the vaginal vault, rectum, bladder, urethra or small bowel. Minimally invasive surgery such as laparoscopic sacrocolpopexy and pectopexy are widely performed for the treatment of the vaginal prolapse with weakly supported vaginal vault after hysterectomy using prosthetic mesh implants to support (or strengthen) lax apical ligaments. Implants of different shape, size and polymers are selected depending on the patient's anatomy and the surgeon's preference. In this computational study on pectopexy, DynaMesh®-PRP soft, GYNECARE GYNEMESH® PS Nonabsorbable PROLENE® soft and Ultrapro® are tested in a 3D finite element model of the female pelvic floor. The mesh model is implanted into the extraperitoneal space and sutured to the vaginal stump with a bilateral fixation to the iliopectineal ligament at both sides. Numerical simulations are conducted at rest, after surgery and during Valsalva maneuver with weakened tissues modeled by reduced tissue stiffness. Tissues and prosthetic meshes are modeled as incompressible, isotropic hyperelastic materials. The positions of the organs are calculated with respect to the pubococcygeal line (PCL) for female pelvic floor at rest, after repair and during Valsalva maneuver using the three meshes.},
  language  = {en}
}
@incollection{StaatHeitzer2003,
  author    = {Staat, Manfred and Heitzer, Michael},
  title     = {Probabilistic limit and shakedown problems},
  series = {Numerical methods for limit and shakedown analysis. Deterministic and probabilistic problems},
  volume    = {15},
  booktitle = {Numerical methods for limit and shakedown analysis. Deterministic and probabilistic problems},
  editor    = {Staat, Manfred and Heitzer, Michael},
  publisher = {John von Neumann Institute for Computing (NIC)},
  address   = {J{\"u}lich},
  isbn      = {3-00-010001-6},
  pages     = {217 -- 268},
  year      = {2003},
  language  = {en}
}
@incollection{BhattaraiStaat2018,
  author    = {Bhattarai, Aroj and Staat, Manfred},
  title     = {Mechanics of soft tissue reactions to textile mesh implants},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_11},
  pages     = {251 -- 275},
  year      = {2018},
  abstract  = {For pelvic floor disorders that cannot be treated with non-surgical procedures, minimally invasive surgery has become a more frequent and safer repair procedure. More than 20 million prosthetic meshes are implanted each year worldwide. The simple selection of a single synthetic mesh construction for any level and type of pelvic floor dysfunctions without adopting the design to specific requirements increase the risks for mesh related complications. Adverse events are closely related to chronic foreign body reaction, with enhanced formation of scar tissue around the surgical meshes, manifested as pain, mesh erosion in adjacent structures (with organ tissue cut), mesh shrinkage, mesh rejection and eventually recurrence. Such events, especially scar formation depend on effective porosity of the mesh, which decreases discontinuously at a critical stretch when pore areas decrease making the surgical reconstruction ineffective that further augments the re-operation costs. The extent of fibrotic reaction is increased with higher amount of foreign body material, larger surface, small pore size or with inadequate textile elasticity. Standardized studies of different meshes are essential to evaluate influencing factors for the failure and success of the reconstruction. Measurements of elasticity and tensile strength have to consider the mesh anisotropy as result of the textile structure. An appropriate mesh then should show some integration with limited scar reaction and preserved pores that are filled with local fat tissue. This chapter reviews various tissue reactions to different monofilament mesh implants that are used for incontinence and hernia repairs and study their mechanical behavior. This helps to predict the functional and biological outcomes after tissue reinforcement with meshes and permits further optimization of the meshes for the specific indications to improve the success of the surgical treatment.},
  language  = {en}
}
@article{LeschingerBirgelHackletal.2019,
  author    = {Leschinger, Tim and Birgel, Stefan and Hackl, Michael and Staat, Manfred and M{\"u}ller, Lars Peter and Wegmann, Kilian},
  title     = {A musculoskeletal shoulder simulation of moment arms and joint reaction forces after medialization of the supraspinatus footprint in rotator cuff repair},
  series = {Computer Methods in Biomechanics and Biomedical Engineering},
  journal   = {Computer Methods in Biomechanics and Biomedical Engineering},
  number    = {Early view},
  publisher = {Taylor \& Francis},
  address   = {London},
  doi       = {10.1080/10255842.2019.1572749},
  year      = {2019},
  language  = {en}
}
@techreport{BhattaraiFrotscherDurongetal.2016,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Durong, Minh Tu{\´a}n and Staat, Manfred},
  title     = {Schlussbericht zu BINGO. Optimierung des Systems Netzimplantat-Beckenboden zur therapeutischen Gewebeverst{\"a}rkung nach der Integraltheorie.},
  address   = {Aachen},
  pages     = {34},
  year      = {2016},
  language  = {de}
}
@article{TranStaat2020,
  author    = {Tran, Ngoc Trinh and Staat, Manfred},
  title     = {Direct plastic structural design under lognormally distributed strength by chance constrained programming},
  series = {Optimization and Engineering},
  volume    = {21},
  journal   = {Optimization and Engineering},
  number    = {1},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {1573-2924},
  doi       = {10.1007/s11081-019-09437-2},
  pages     = {131 -- 157},
  year      = {2020},
  abstract  = {We propose the so-called chance constrained programming model of stochastic programming theory to analyze limit and shakedown loads of structures under random strength with a lognormal distribution. A dual chance constrained programming algorithm is developed to calculate simultaneously both the upper and lower bounds of the plastic collapse limit and the shakedown limit. The edge-based smoothed finite element method (ES-FEM) is used with three-node linear triangular elements.},
  language  = {en}
}
@article{MeyerGaalenLeschingeretal.2019,
  author    = {Meyer, Carolin and Gaalen, Kerstin van and Leschinger, Tim and Scheyerer, Max J. and Neiss, Wolfram F. and Staat, Manfred and M{\"u}ller, Lars P. and Wegmann, Kilian},
  title     = {Kyphoplasty of Osteoporotic Fractured Vertebrae: A Finite Element Analysis about Two Types of Cement},
  series = {BioMed Research International},
  journal   = {BioMed Research International},
  doi       = {10.1155/2019/9232813},
  pages     = {Article ID 9232813},
  year      = {2019},
  language  = {en}
}
@article{JungMuellerStaat2019,
  author    = {Jung, Alexander and M{\"u}ller, Wolfram and Staat, Manfred},
  title     = {Optimization of the flight technique in ski jumping: the influence of wind},
  number    = {Early view},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.jbiomech.2019.03.023},
  year      = {2019},
  language  = {en}
}
@misc{StaatHorbachGatzweiler2019,
  author    = {Staat, Manfred and Horbach, Andreas and Gatzweiler, Karl-Heinz},
  title     = {Biaxiales Materialpr{\"u}fsystem und Verfahren zu dessen Anwendung},
  year      = {2019},
  abstract  = {System und Verfahren zur Durchf{\"u}hrung von Messungen biaxialer und kreuzf{\"o}rmiger Zugversuche, wobei ein Weg oder eine Kraft auf eine Materialprobe {\"u}ber mindestens zwei Nadelarme mit Nadeln geleitet wird, die in einem Geh{\"a}use gelagert sind, wobei die Arme und/oder Nadelarme f{\"u}r eine ungehinderte Querkontraktion bei gleichm{\"a}ßiger Lasteinleitung um eine Achse drehbar gelagert und seitlich auslenkbar sind.},
  language  = {de}
}
@article{AbelKahmannMellonetal.2020,
  author    = {Abel, Alexander and Kahmann, Stephanie Lucina and Mellon, Stephen and Staat, Manfred and Jung, Alexander},
  title     = {An open-source tool for the validation of finite element models using three-dimensional full-field measurements},
  series = {Medical Engineering \& Physics},
  volume    = {77},
  journal   = {Medical Engineering \& Physics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1350-4533},
  doi       = {10.1016/j.medengphy.2019.10.015},
  pages     = {125 -- 129},
  year      = {2020},
  abstract  = {Three-dimensional (3D) full-field measurements provide a comprehensive and accurate validation of finite element (FE) models. For the validation, the result of the model and measurements are compared based on two respective point-sets and this requires the point-sets to be registered in one coordinate system. Point-set registration is a non-convex optimization problem that has widely been solved by the ordinary iterative closest point algorithm. However, this approach necessitates a good initialization without which it easily returns a local optimum, i.e. an erroneous registration. The globally optimal iterative closest point (Go-ICP) algorithm has overcome this drawback and forms the basis for the presented open-source tool that can be used for the validation of FE models using 3D full-field measurements. The capability of the tool is demonstrated using an application example from the field of biomechanics. Methodological problems that arise in real-world data and the respective implemented solution approaches are discussed.},
  language  = {en}
}
@article{GossmannThomasHorvathetal.2020,
  author    = {Gossmann, Matthias and Thomas, Ulrich and Horv{\´a}th, Andr{\´a}s and Dragicevic, Elena and Stoelzle-Feix, Sonja and Jung, Alexander and Raman, Aravind Hariharan and Staat, Manfred and Linder, Peter},
  title     = {A higher-throughput approach to investigate cardiac contractility in vitro under physiological mechanical conditions},
  series = {Journal of Pharmacological and Toxicological Methods},
  volume    = {105},
  journal   = {Journal of Pharmacological and Toxicological Methods},
  number    = {Article 106843},
  publisher = {Elsevier},
  address   = {New York, NY},
  doi       = {10.1016/j.vascn.2020.106843},
  year      = {2020},
  language  = {en}
}
@inproceedings{TranStaat2021,
  author    = {Tran, Ngoc Trinh and Staat, Manfred},
  title     = {FEM shakedown analysis of Kirchhoff-Love plates under uncertainty of strength},
  series = {Proceedings of UNCECOMP 2021},
  booktitle = {Proceedings of UNCECOMP 2021},
  isbn      = {978-618-85072-6-5},
  doi       = {10.7712/120221.8041.19047},
  pages     = {323 -- 338},
  year      = {2021},
  abstract  = {A new formulation to calculate the shakedown limit load of Kirchhoff plates under stochastic conditions of strength is developed. Direct structural reliability design by chance con-strained programming is based on the prescribed failure probabilities, which is an effective approach of stochastic programming if it can be formulated as an equivalent deterministic optimization problem. We restrict uncertainty to strength, the loading is still deterministic. A new formulation is derived in case of random strength with lognormal distribution. Upper bound and lower bound shakedown load factors are calculated simultaneously by a dual algorithm.},
  language  = {en}
}
@article{HacklBuessKammerlohretal.2021,
  author    = {Hackl, Michael and Buess, Eduard and Kammerlohr, Sandra and Nacov, Julia and Staat, Manfred and Leschinger, Tim and M{\"u}ller, Lars P. and Wegmann, Kilian},
  title     = {A "comma sign"-directed subscapularis repair in anterosuperior rotator cuff tears yields biomechanical advantages in a cadaveric model},
  series = {The american journal of sports medicine},
  volume    = {49},
  journal   = {The american journal of sports medicine},
  number    = {12},
  publisher = {Sage},
  address   = {London},
  issn      = {1552-3365},
  doi       = {10.1177/03635465211031506},
  pages     = {3212 -- 3217},
  year      = {2021},
  abstract  = {Background: Additional stabilization of the "comma sign" in anterosuperior rotator cuff repair has been proposed to provide biomechanical benefits regarding stability of the repair. Purpose: This in vitro investigation aimed to investigate the influence of a comma sign-directed reconstruction technique for anterosuperior rotator cuff tears on the primary stability of the subscapularis tendon repair. Study Design: Controlled laboratory study. Methods: A total of 18 fresh-frozen cadaveric shoulders were used in this study. Anterosuperior rotator cuff tears (complete full-thickness tear of the supraspinatus and subscapularis tendons) were created, and supraspinatus repair was performed with a standard suture bridge technique. The subscapularis was repaired with either a (1) single-row or (2) comma sign technique. A high-resolution 3D camera system was used to analyze 3-mm and 5-mm gap formation at the subscapularis tendon-bone interface upon incremental cyclic loading. Moreover, the ultimate failure load of the repair was recorded. A Mann-Whitney test was used to assess significant differences between the 2 groups. Results: The comma sign repair withstood significantly more loading cycles than the single-row repair until 3-mm and 5-mm gap formation occurred (P≤ .047). The ultimate failure load did not reveal any significant differences when the 2 techniques were compared (P = .596). Conclusion: The results of this study show that additional stabilization of the comma sign enhanced the primary stability of subscapularis tendon repair in anterosuperior rotator cuff tears. Although this stabilization did not seem to influence the ultimate failure load, it effectively decreased the micromotion at the tendon-bone interface during cyclic loading. Clinical Relevance: The proposed technique for stabilization of the comma sign has shown superior biomechanical properties in comparison with a single-row repair and might thus improve tendon healing. Further clinical research will be necessary to determine its influence on the functional outcome.},
  language  = {en}
}
@article{HacklNacovKammerlohretal.2021,
  author    = {Hackl, Michael and Nacov, Julia and Kammerlohr, Sandra and Staat, Manfred and Buess, Eduard and Leschinger, Tim and M{\"u}ller, Lars P. and Wegmann, Kilian},
  title     = {Intratendinous Strain Variations of the Supraspinatus Tendon Depending on Repair Technique: A Biomechanical Analysis Regarding the Cause of Medial Cuff Failure},
  series = {The American Journal of Sports Medicine},
  volume    = {49},
  journal   = {The American Journal of Sports Medicine},
  number    = {7},
  publisher = {Sage},
  address   = {London},
  issn      = {1552-3365},
  doi       = {10.1177/03635465211006138},
  pages     = {1847 -- 1853},
  year      = {2021},
  language  = {en}
}
@incollection{DuongNguyenStaat2017,
  author    = {Duong, Minh Tuan and Nguyen, Nhu Huynh and Staat, Manfred},
  title     = {Physical response of hyperelastic models for composite materials and soft tissues},
  series = {Advances in Composite Material},
  booktitle = {Advances in Composite Material},
  publisher = {Scientific Research Publishing},
  address   = {Wuhan},
  isbn      = {978-1-61896-300-0 (Hardcover), 978-1-61896-299-7 (Paperback)},
  pages     = {316},
  year      = {2017},
  language  = {en}
}
@article{HorbachDuongStaat2017,
  author    = {Horbach, Andreas and Duong, Minh Tuan and Staat, Manfred},
  title     = {Modelling of compressible and orthotropic surgical mesh implants based on optical deformation measurement},
  series = {Journal of the mechanical behavior of biomedical materials},
  volume    = {74},
  journal   = {Journal of the mechanical behavior of biomedical materials},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1751-6161},
  doi       = {10.1016/j.jmbbm.2017.06.012},
  pages     = {400 -- 410},
  year      = {2017},
  language  = {en}
}
@article{MichaelMayerWeberetal.2017,
  author    = {Michael, Hackl and Mayer, Katharina and Weber, Mareike and Staat, Manfred and van Riet, Roger and Burkhart, Klau Josef and M{\"u}ller, Lars Peter and Wegmann, Kilian},
  title     = {Plate osteosynthesis of proximal ulna fractures : a biomechanical micromotion analysis},
  series = {The journal of hand surgery},
  volume    = {42},
  journal   = {The journal of hand surgery},
  number    = {10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0363-5023},
  doi       = {10.1016/j.jhsa.2017.05.014},
  pages     = {834.e1 -- 834.e7},
  year      = {2017},
  language  = {en}
}
@inproceedings{AbelPerezVianaCiritsisetal.2017,
  author    = {Abel, Alexander and P{\´e}rez-Viana, Daniel and Ciritsis, Bernard and Staat, Manfred},
  title     = {Prevention of femur neck fractures through femoroplasty},
  series = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  booktitle = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  editor    = {Erni, Daniel and Fischerauer, Alice and Himmel, J{\"o}rg and Seeger, Thomas and Thelen, Klaus},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-9814801-9-1},
  doi       = {10.17185/duepublico/43984},
  pages     = {114 -- 115},
  year      = {2017},
  language  = {en}
}
@inproceedings{BirgelLeschingerWegmannetal.2017,
  author    = {Birgel, Stefan and Leschinger, Tim and Wegmann, Kilian and Staat, Manfred},
  title     = {Calculation of muscle forces and joint reaction loads in shoulder area via an OpenSim based computer calculation},
  series = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  booktitle = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  editor    = {Erni, Daniel and Fischerauer, Alice and Himmel, J{\"o}rg and Seeger, Thomas and Thelen, Klaus},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-9814801-9-1},
  doi       = {10.17185/duepublico/43984},
  pages     = {116 -- 117},
  year      = {2017},
  language  = {en}
}