@techreport{BohnFunkeMetal.2001,
  author    = {Bohn, Dieter and Funke, Harald and M., Wolff. and S{\"u}rken, N.},
  title     = {Aerodynamische Entlastung der Schaufelspalte durch Konturierung des Meridiankanals [Zwischenbericht]},
  organization    = {Forschungsvereinigung Verbrennungskraftmaschinen (FVV)},
  year      = {2001},
  abstract  = {Zwischenbericht {\"u}ber das Vorhaben Nr. 688 (FVV-Nr. 066880). Laufzeit 01.04.2000 bis 31.03.2001. Heft R 514 (2001). 21 S. Informationstagung Turbinen, Herbst 2001, Dresden-Radebeul},
  subject      = {Str{\"o}mungsmaschine},
  language  = {de}
}
@techreport{BohnFunkeSuerken2000,
  author    = {Bohn, Dieter and Funke, Harald and S{\"u}rken, N.},
  title     = {Aerodynamische Entlastung der Schaufelspalte durch Konturierung des Meridiankanals [Zwischenbericht]},
  organization    = {Forschungsvereinigung Verbrennungskraftmaschinen (FVV)},
  year      = {2000},
  abstract  = {Zwischenbericht {\"u}ber das Vorhaben FVV-Nr. 0666880. Laufzeit 01.03.1998 bis 31.03.2000. Heft R 507 (2000) . 19 S. Informationstagung Turbinen, Fr{\"u}hjahr 2000, Frankfurt am Main},
  subject      = {Str{\"o}mungsmaschine},
  language  = {de}
}
@techreport{BohnFunkeHeuer2001,
  author    = {Bohn, Dieter and Funke, Harald and Heuer, T.},
  title     = {Sonden-Schaufel-Interaktion bei station{\"a}ren Messungen mit pneumatischen Str{\"o}mungssonden in engen Axialspalten},
  organization    = {Forschungsvereinigung Verbrennungskraftmaschinen (FVV)},
  year      = {2001},
  abstract  = {Abschlussbereicht {\"u}ber das Anschlussvorhaben zu FVV-Nr. 665 (AIF-Nr. 10780). Heft R 511 (2001). 23 S. Informationstagung Turbinen, Fr{\"u}hjahr 2001, Frankfurt.},
  subject      = {Str{\"o}mungsmaschine},
  language  = {de}
}
@techreport{BohnFunkeGieretal.1999,
  author    = {Bohn, Dieter and Funke, Harald and Gier, J. and Heuer, T.},
  title     = {Untersuchung des Str{\"o}mungsausgleichs in den Schaufelreihen ungleichf{\"o}rmig ungestr{\"o}mter Turbomaschinen},
  organization    = {Forschungsvereinigung Verbrennungskraftmaschinen (FVV)},
  year      = {1999},
  abstract  = {Abschlussbericht {\"u}ber das Vorhaben FVV-Nr. 665 (AIF-Nr. 10780). Laufzeit 01.08.1996 bis 31.10.1999. Heft R 504 (1999). S. 99-124. Informationstagung Turbinen, Herbst 1999, Heidelberg.},
  subject      = {Str{\"o}mungsmaschine},
  language  = {de}
}
@techreport{BohnFunkeGier1998,
  author    = {Bohn, Dieter and Funke, Harald and Gier, J.},
  title     = {Untersuchung des Str{\"o}mungsausgleichs in den Schaufelreihen ungleichf{\"o}rmig ungestr{\"o}mter Turbomaschinen},
  organization    = {Forschungsvereinigung Verbrennungskraftmaschinen (FVV)},
  year      = {1998},
  abstract  = {Zwischenbericht {\"u}ber das Vorhaben FVV - Nr. 665 (AIF-Nr. 10780) Heft R 498(1998) S. 123-136. Informationstagung Turbinen, Fr{\"u}hjahr 1998, Frankfurt},
  subject      = {Str{\"o}mungsmaschine},
  language  = {de}
}
@inproceedings{Mertens2000,
  author    = {Mertens, Josef},
  title     = {Laminar leading edges: manufacturing, contamination, and operational aspects - results from the German RaWid programme},
  year      = {2000},
  abstract  = {RaWid was the German national technology programme on transonic aerodynamics and supporting technologies, lasting from 1995 to 1998. One of the main topics was laminar wing development. Besides aerodynamic design work, many operational aspects were investigated. A manufacturing concept was developed to be applied to operational laminar wings and empennages. It was built in a large scale manufacturing demonstrator with the aerodynamic shape of a 1,5 m section of the A320 fin nose. Tolerances in shape and roughness fulfilled all requirements. The construction can easily be adapted to varying stiffness and strength requirements. Weight and manufacturing costs are comparable to common nose designs. The mock-up to be designed in ALTTA is based on this manufacturing principle. Another critical point is contamination of suction surfaces. Several tests were performed to investigate perforated titanium suction surfaces at realistic operational conditions: - a one year flight test with a suction plate in the stagnation area of the Airbus "Beluga" - a one year test of several suction plates in a ground test near the airport - a one year test of a working suction ground test installation at all weather conditions. No critical results were found. There is no long term suction degradation visible. Icing conditions and ground de-icing fluids used on airports did not pose severe problems. Some problems detected require only respection of weak design constraints.},
  subject      = {Laminare Str{\"o}mung},
  language  = {en}
}
@misc{Kaemper2008,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Lecture notes Sensors and Actuators WS 2008/2009},
  year      = {2008},
  abstract  = {Password necessarily. Access only for Students by Prof. Dr. Klaus-Peter K{\"a}mper. Winter semester 2008/2009. 488 pages (pdf) Contents 1. Introduction 2. Introduction to Sensors 3. Introduction to Microfabrication 4. Pressure Sensors 5. Acceleration Sensors 6. Angular Rate Sensors 7. Position Sensors 8. Flow Sensors 9. Piezoelectric Actuators 10. Magnetostrictive Actuators 11. Actuators based on Shape Memory Alloys 12. Actuators based on Electrorheological Fluids 13. Actuators based on Magnetorheological Fluids 14. Index},
  subject      = {Sensor},
  language  = {en}
}
@inproceedings{StaatTranPham2008,
  author    = {Staat, Manfred and Tran, Thanh Ngoc and Pham, Phu Tinh},
  title     = {Limit and shakedown reliability analysis by nonlinear programming},
  year      = {2008},
  abstract  = {7th International Conference on Reliability of Materials and Structures (RELMAS 2008). June 17 - 20, 2008 ; Saint Petersburg, Russia. pp 354-358. Reprint with corrections in red Introduction Analysis of advanced structures working under extreme heavy loading such as nuclear power plants and piping system should take into account the randomness of loading, geometrical and material parameters. The existing reliability are restricted mostly to the elastic working regime, e.g. allowable local stresses. Development of the limit and shakedown reliability-based analysis and design methods, exploiting potential of the shakedown working regime, is highly needed. In this paper the application of a new algorithm of probabilistic limit and shakedown analysis for shell structures is presented, in which the loading and strength of the material as well as the thickness of the shell are considered as random variables. The reliability analysis problems may be efficiently solved by using a system combining the available FE codes, a deterministic limit and shakedown analysis, and the First and Second Order Reliability Methods (FORM/SORM). Non-linear sensitivity analyses are obtained directly from the solution of the deterministic problem without extra computational costs.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@inproceedings{TranPhamStaat2008,
  author    = {Tran, Thanh Ngoc and Pham, Phu Tinh and Staat, Manfred},
  title     = {Reliability analysis of shells based on direct plasticity methods},
  year      = {2008},
  abstract  = {Abstracts der CD-Rom Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) 30.06. - 04.07.2008 Venedig, Italien. 2 Seiten Zusammenfassung der Autoren mit graph. Darst. und Literaturverzeichnis},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@inproceedings{Hoepner2008,
  author    = {Hoepner, Gert},
  title     = {Jurorenstatement - Junioren zeigen sich aggressiv},
  organization    = {DDV Deutscher Dialogmarketing Verband e. V.},
  year      = {2008},
  abstract  = {Statement zu den Einreichung des DDP 2008},
  subject      = {Deutscher Direktmarketing-Verband},
  language  = {de}
}