@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Aerodynamic multi point design challenge},
  series = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_4},
  pages     = {53 -- 67},
  year      = {1997},
  abstract  = {In the chapter "Son of Concorde, a Technology Challenge" one of the new challenges for a Supersonic Commercial Transport (SCT) is multi-point design for the four main design points: - supersonic cruise - transonic cruise - take-off and landing - transonic acceleration.},
  language  = {en}
}
@misc{SchmitzSchebitzEsch1997,
  author    = {Schmitz, G{\"u}nter and Schebitz, Michael and Esch, Thomas},
  title     = {Aus der Ruhelage selbstanziehender elektromagnetischer Aktuator},
  year      = {1997},
  abstract  = {Elektromagnetischer Aktuator zur Bet{\"a}tigung eines Stellgliedes (2), mit wenigstens einem Elektromagneten (4) und einem mit dem Stellglied (2) verbundenen Anker (3), der gegen die Kraft einer R{\"u}ckstellfeder (6) aus seiner Ruhelage in Richtung auf den Elektromagneten (4) bewegbar ist, mit einer R{\"u}ckstellfeder (6), die eine nicht lineare, bezogen auf die Ruhelage des Ankers (3) progressiv ansteigende Kennlinie aufweist.},
  language  = {de}
}
@article{GerhardtKrueger1997,
  author    = {Gerhardt, Hans Joachim and Kr{\"u}ger, O.},
  title     = {Building shape influence on local wind loads},
  series = {Proceedings of the 2nd European \& African Conference on Wind Engineering : 2 EACWE, Palazzo Ducale, Genova, Italy, June 22-26, 1997 / ed. by Giovanni Solari. - Vol. 2},
  journal   = {Proceedings of the 2nd European \& African Conference on Wind Engineering : 2 EACWE, Palazzo Ducale, Genova, Italy, June 22-26, 1997 / ed. by Giovanni Solari. - Vol. 2},
  publisher = {Servizi Grafici Editoriali},
  address   = {Padova},
  isbn      = {88-86281-19-6},
  pages     = {XIX, S. 1017 - 1998 : Ill., graph. Darst.},
  year      = {1997},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Certification of supersonic civil transports},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_6},
  pages     = {97 -- 103},
  year      = {1997},
  abstract  = {Since certification of Concorde new certification standards were introduced including many new regulations to improve flight safety. Most of these standards are to prevent severe accidents in the future which happened in the past (here: after Concorde's certification). A new SCT has to fulfill these standards, although Concorde had none of these accidents. But accidents - although they sometimes occurred only for a specific aircraft type - have to be avoided for any (new) aircraft. Because of existing aircraft without typical accident types having demonstrated their reliability, they are allowed to go on based on their old certification; although sometimes new rules prevent accident types which are not connected to specific aircraft types - like e.g. evacuation rules. Anyway, Concorde is allowed to fly based on its old certification, and hopefully in the future will fly as safely as in the past. But a new SCT has to fulfill updated rules like any other aircraft, and it has to be "just another aircraft" [75].},
  language  = {en}
}
@incollection{BrandtGueskenBuechenetal.1997,
  author    = {Brandt, D. and G{\"u}sken, J. and B{\"u}chen, W. and [u.a.], and Wahle, Michael},
  title     = {Konstruieren mit Aluminium [Kapitel 4]},
  series = {Aluminium-Taschenbuch / Hrsg.: Aluminium-Zentrale D{\"u}sseldorf. - Bd. 3: Weiterverarbeitung und Anwendung},
  booktitle = {Aluminium-Taschenbuch / Hrsg.: Aluminium-Zentrale D{\"u}sseldorf. - Bd. 3: Weiterverarbeitung und Anwendung},
  edition   = {15. Auflage},
  publisher = {Aluminium-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87017-243-6},
  pages     = {359 -- 544},
  year      = {1997},
  language  = {de}
}
@book{BergmannSchaeferBlomeetal.1997,
  author    = {Bergmann, Ludwig and Sch{\"a}fer, Clemens and Blome, Hans-Joachim and Gobrecht, Heinrich},
  title     = {Lehrbuch der Experimentalphysik ; Bd. 8 : Sterne und Weltraum},
  editor    = {Raith, Wilhelm},
  publisher = {de Gruyter},
  address   = {Berlin [u.a.]},
  isbn      = {3110151731},
  pages     = {XII, 467 S : Ill., graph. Darst.},
  year      = {1997},
  language  = {de}
}
@article{SchmitzPischinger1997,
  author    = {Schmitz, G{\"u}nter and Pischinger, M.},
  title     = {Mechatronische Simulation eines EMV- Aktuators},
  series = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Paderborner Workshop TransMechatronik, 24. Juni 1997, Heinz-Nixdorf-MuseumsForum. [Hrsg. J{\"u}rgen Gausemeier]},
  journal   = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Paderborner Workshop TransMechatronik, 24. Juni 1997, Heinz-Nixdorf-MuseumsForum. [Hrsg. J{\"u}rgen Gausemeier]},
  publisher = {Heinz-Nixdorf-Inst., Univ.-GH Paderborn},
  address   = {Paderborn},
  isbn      = {3-931466-22-1},
  pages     = {69 -- 83},
  year      = {1997},
  language  = {de}
}
@article{HavermannBeylich1997,
  author    = {Havermann, Marc and Beylich, A. E.},
  title     = {Performance and Limitations of the Laser-Induced Fluorescence Measurement Technique and the Established Experimental Methods for the Study of Supersonic Mixing / Havermann, M. ; Beylich, A. E.},
  series = {International Journal of heat and technology. 15 (1997), H. 2},
  journal   = {International Journal of heat and technology. 15 (1997), H. 2},
  publisher = {-},
  pages     = {3 -- 10},
  year      = {1997},
  language  = {en}
}
@book{Ley1997,
  author    = {Ley, Wilfried},
  title     = {Raumfahrtmissionen zur Erkundung des Sonnensystems : Gemeinschaftsveranstaltung der FH Aachen, der DGLR und des DLR / 10. Raumfahrt-Kolloquium an der Fachhochschule Aachen, 5. November 1997 / Ley, Wilfried [Hrsg.]},
  publisher = {DGLR},
  address   = {Bonn},
  isbn      = {3-922010-99-7},
  pages     = {VIII, 251 S. : Ill., graph. Darst., 30 cm},
  year      = {1997},
  language  = {de}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Reduction of aerodynamic drag (RaWid)-Status after the first year of the program},
  series = {New results in numerical and experimental fluid mechanics. - (Notes on numerical fluid mechanics ; 60)},
  booktitle = {New results in numerical and experimental fluid mechanics. - (Notes on numerical fluid mechanics ; 60)},
  publisher = {Vieweg},
  address   = {Braunschweig [u.a.]},
  isbn      = {3-528-06960-0},
  doi       = {10.1007/978-3-322-86573-1_2},
  pages     = {7 -- 14},
  year      = {1997},
  abstract  = {The technology programme "Reduction of aerodynamic drag (RaWid)" for high speed aerodynamics at Daimler-Benz Aerospace Airbus is sponsered by the German ministry for education, research and technology since July 1, 1995. Connected to this industrial programme are the cooperation programmes "MEGAFLOW" under leadership of the DLR and "Transition" by the DFG, and several contributions by DLR and universities. The programme is oriented towards technologies required for a MEGALINER which gains momentum by the ambitious plans for a new large Airbus A3XX. In the first year new technological steps were undertaken in theory, design and experiment. Some critical steps were verified by wing designs checked in wind tunnel tests.},
  language  = {en}
}