@article{OezsoyluAliaziziWagneretal.2024,
  author    = {{\"O}zsoylu, Dua and Aliazizi, Fereshteh and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Template bacteria-free fabrication of surface imprinted polymer-based biosensor for E. coli detection using photolithographic mimics: Hacking bacterial adhesion},
  series = {Biosensors and Bioelectronics},
  volume    = {261},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4235 (eISSN)},
  doi       = {10.1016/j.bios.2024.116491},
  pages     = {11 Seiten},
  year      = {2024},
  abstract  = {As one class of molecular imprinted polymers (MIPs), surface imprinted polymer (SIP)-based biosensors show great potential in direct whole-bacteria detection. Micro-contact imprinting, that involves stamping the template bacteria immobilized on a substrate into a pre-polymerized polymer matrix, is the most straightforward and prominent method to obtain SIP-based biosensors. However, the major drawbacks of the method arise from the requirement for fresh template bacteria and often non-reproducible bacteria distribution on the stamp substrate. Herein, we developed a positive master stamp containing photolithographic mimics of the template bacteria (E. coli) enabling reproducible fabrication of biomimetic SIP-based biosensors without the need for the "real" bacteria cells. By using atomic force and scanning electron microscopy imaging techniques, respectively, the E. coli-capturing ability of the SIP samples was tested, and compared with non-imprinted polymer (NIP)-based samples and control SIP samples, in which the cavity geometry does not match with E. coli cells. It was revealed that the presence of the biomimetic E. coli imprints with a specifically designed geometry increases the sensor E. coli-capturing ability by an "imprinting factor" of about 3. These findings show the importance of geometry-guided physical recognition in bacterial detection using SIP-based biosensors. In addition, this imprinting strategy was employed to interdigitated electrodes and QCM (quartz crystal microbalance) chips. E. coli detection performance of the sensors was demonstrated with electrochemical impedance spectroscopy (EIS) and QCM measurements with dissipation monitoring technique (QCM-D).},
  language  = {en}
}
@article{ZhenLiangStaatetal.2024,
  author    = {Zhen, Manghao and Liang, Yunpei and Staat, Manfred and Li, Quanqui and Li, Jianbo},
  title     = {Discontinuous fracture behaviors and constitutive model of sandstone specimens containing non-parallel prefabricated fissures under uniaxial compression},
  series = {Theoretical and Applied Fracture Mechanics},
  volume    = {131},
  journal   = {Theoretical and Applied Fracture Mechanics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-8442},
  doi       = {10.1016/j.tafmec.2024.104373},
  pages     = {Artikel 104373},
  year      = {2024},
  abstract  = {The deformation and damage laws of non-homogeneous irregular structural planes in rocks are the basis for studying the stability of rock engineering. To investigate the damage characteristics of rock containing non-parallel fissures, uniaxial compression tests and numerical simulations were conducted on sandstone specimens containing three non-parallel fissures inclined at 0°, 45° and 90° in this study. The characteristics of crack initiation and crack evolution of fissures with different inclinations were analyzed. A constitutive model for the discontinuous fractures of fissured sandstone was proposed. The results show that the fracture behaviors of fissured sandstone specimens are discontinuous. The stress-strain curves are non-smooth and can be divided into nonlinear crack closure stage, linear elastic stage, plastic stage and brittle failure stage, of which the plastic stage contains discontinuous stress drops. During the uniaxial compression test, the middle or ends of 0° fissures were the first to crack compared to 45° and 90° fissures. The end with small distance between 0° and 45° fissures cracked first, and the end with large distance cracked later. After the final failure, 0° fissures in all specimens were fractured, while 45° and 90° fissures were not necessarily fractured. Numerical simulation results show that the concentration of compressive stress at the tips of 0°, 45° and 90° fissures, as well as the concentration of tensile stress on both sides, decreased with the increase of the inclination angle. A constitutive model for the discontinuous fractures of fissured sandstone specimens was derived by combining the logistic model and damage mechanic theory. This model can well describe the discontinuous drops of stress and agrees well with the whole processes of the stress-strain curves of the fissured sandstone specimens.},
  language  = {en}
}
@masterthesis{Zeyen2024,
  type      = {Bachelor Thesis},
  author    = {Zeyen, Kim},
  title     = {Seeds : Konzeption und Gestaltung eines Toolkits f{\"u}r die Entwicklung nachhaltiger Webdesigns},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {197 Seiten},
  year      = {2024},
  abstract  = {Die Menschheit lebt {\"u}ber ihre Verhältnisse: Permanent {\"u}bersteigt unser Verbrauch die uns j{\"a}hrlich zur Verf{\"u}gung stehenden Ressourcen. Der Energiebedarf digitaler Anwendungen wird dabei meist unterschätzt. Wie Interaction-Designer:innen einen Beitrag zur Entwicklung nachhaltiger Websites leisten können, ist aktuell nur durch aufwendige Recherche zu beantworten. Die Bachelorarbeit »Seeds« stellt einen Schritt im Prozess zu mehr Nachhaltigkeit dar. Sie umfasst ein Toolkit, bestehend aus einer Website und einem Plugin f{\"u}r g{\"a}ngige Designtools. Dieses b{\"u}ndelt alle Informationen, um das Internet barriereärmer, sozialer, ethischer und eben auch ökologisch verträglicher zu gestalten. W{\"a}hrend die Website eine Anlaufstelle f{\"u}r den Wissensaufbau darstellt, unterst{\"u}tzt das Plugin bei der Entwicklung eigener Designs, ohne dass Gestalter:innen den Designprozess verlassen m{\"u}ssen.},
  language  = {de}
}
@article{YoshinobuMiyamotoWagneretal.2024,
  author    = {Yoshinobu, Tatsuo and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Field-effect sensors combined with the scanned light pulse technique: from artificial olfactory images to chemical imaging technologies},
  series = {Chemosensors},
  volume    = {12},
  journal   = {Chemosensors},
  number    = {2},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9040},
  doi       = {10.3390/chemosensors12020020},
  pages     = {Artikel 20},
  year      = {2024},
  abstract  = {The artificial olfactory image was proposed by Lundstr{\"o}m et al. in 1991 as a new strategy for an electronic nose system which generated a two-dimensional mapping to be interpreted as a fingerprint of the detected gas species. The potential distribution generated by the catalytic metals integrated into a semiconductor field-effect structure was read as a photocurrent signal generated by scanning light pulses. The impact of the proposed technology spread beyond gas sensing, inspiring the development of various imaging modalities based on the light addressing of field-effect structures to obtain spatial maps of pH distribution, ions, molecules, and impedance, and these modalities have been applied in both biological and non-biological systems. These light-addressing technologies have been further developed to realize the position control of a faradaic current on the electrode surface for localized electrochemical reactions and amperometric measurements, as well as the actuation of liquids in microfluidic devices.},
  language  = {en}
}
@inproceedings{WittigRuettersBragard2024,
  author    = {Wittig, M. and R{\"u}tters, Ren{\´e} and Bragard, Michael},
  title     = {Application of RL in control systems using the example of a rotatory inverted pendulum},
  series = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  booktitle = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-02-3},
  doi       = {10.33968/2024.53},
  pages     = {241 -- 248},
  year      = {2024},
  abstract  = {In this paper, the use of reinforcement learning (RL) in control systems is investigated using a rotatory inverted pendulum as an example. The control behavior of an RL controller is compared to that of traditional LQR and MPC controllers. This is done by evaluating their behavior under optimal conditions, their disturbance behavior, their robustness and their development process. All the investigated controllers are developed using MATLAB and the Simulink simulation environment and later deployed to a real pendulum model powered by a Raspberry Pi. The RL algorithm used is Proximal Policy Optimization (PPO). The LQR controller exhibits an easy development process, an average to good control behavior and average to good robustness. A linear MPC controller could show excellent results under optimal operating conditions. However, when subjected to disturbances or deviations from the equilibrium point, it showed poor performance and sometimes instable behavior. Employing a nonlinear MPC Controller in real time was not possible due to the high computational effort involved. The RL controller exhibits by far the most versatile and robust control behavior. When operated in the simulation environment, it achieved a high control accuracy. When employed in the real system, however, it only shows average accuracy and a significantly greater performance loss compared to the simulation than the traditional controllers. With MATLAB, it is not yet possible to directly post-train the RL controller on the Raspberry Pi, which is an obstacle to the practical application of RL in a prototyping or teaching setting. Nevertheless, RL in general proves to be a flexible and powerful control method, which is well suited for complex or nonlinear systems where traditional controllers struggle.},
  language  = {en}
}
@masterthesis{Wiese2024,
  type      = {Bachelor Thesis},
  author    = {Wiese, Katharina},
  title     = {Drink me},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {39 Seiten},
  year      = {2024},
  abstract  = {„Drink me" ist ein Kurzfilm {\"u}ber drei Freunde auf einer Party, auf der ein mysteri{\"o}ses Getr{\"a}nk verteilt wird, das die Partyg{\"a}ste in einen besonderen Rausch versetzt. Die Farben fangen an zu leuchten, die Musik wird klarer, alles f{\"u}hlt sich intensiver an. Bis sich die Wahrnehmung der Protagonistin Ally pl{\"o}tzlich ver{\"a}ndert: Vom bunt leuchtenden Rauschzustand zur scheinbaren Realit{\"a}t: Einem grauen, kalten Bunker voller abgewrackter Gestalten. Ally versucht die Party zu verlassen, doch w{\"a}hrend ihre Wahrnehmungen immer weiter verschwimmen, verliert sie gleichzeitig allm{\"a}hlich ihr Bewusstsein. Der Film bietet durch die Darstellung der verschiedenen Wahrnehmungszust{\"a}nde und das Verschwimmen derer ein visuell besonders spannendes Erlebnis.},
  language  = {de}
}
@incollection{Ulke2024,
  author    = {Ulke, Bernd},
  title     = {Kalkulation},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_12},
  pages     = {801 -- 909},
  year      = {2024},
  abstract  = {Das Kapitel behandelt die Kosten- und Preisermittlung, die Kostenvorgabe und Kostenkontrolle. Der Angebotspreis wird aufgeschl{\"u}sselt in die Einzelkosten der Teilleistungen, die Baustellengemeinkosten, die Allgemeinen Gesch{\"a}ftskosten und einen Zuschlag f{\"u}r Wagnis und Gewinn. Auf der Basis der Angebotskalkulation werden die Vorgaben f{\"u}r die Kostenkontrolle entwickelt.},
  language  = {de}
}
@incollection{Ulke2024,
  author    = {Ulke, Bernd},
  title     = {Privates Baurecht und Nachtragsmanagement},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_3},
  pages     = {149 -- 216},
  year      = {2024},
  abstract  = {Kein Bauvorhaben sollte realisiert werden, ohne dass es auf einer vertraglichen Grundlage zwischen Auftraggeber und Auftragnehmer fußt. Diese vertragliche Grundlage zu kennen ist essenziell, um dementsprechend handeln zu k{\"o}nnen. Denn nur wer seine eigenen Rechte und auch Pflichten kennt, kann sich auf diese berufen.},
  language  = {de}
}
@incollection{Ulke2024,
  author    = {Ulke, Bernd},
  title     = {Bauwirtschaft},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_4},
  pages     = {17 -- 261},
  year      = {2024},
  abstract  = {Die Leistungen der Bauwirtschaft und deren wirtschaftliche Bedeutung in Deutschland werden anhand einer Vielzahl statistischer Daten verdeutlicht. Die im Vergleich zu anderen Wirtschaftsbereichen auftretenden branchenspezifischen Besonderheiten der Bauwirtschaft werden anhand von verschiedenen Kriterien herausgearbeitet. Das Zusammenspiel der einzelnen Akteure des Sektors und die dabei sich ergebenden bzw. zu beachtenden Rechts- und Vertragsgrundlagen werden dargestellt. Aufgrund der meist erheblichen H{\"o}he des eingesetzten Kapitals werden auch notwendige Formen der Risikoabsicherungen und der in der Branche {\"u}blichen und teilweise vorgeschriebenen Versicherungsm{\"o}glichkeiten angesprochen.},
  language  = {de}
}
@incollection{Ulke2024,
  author    = {Ulke, Bernd},
  title     = {{\"O}ffentliches Baurecht, Ausschreibung und Vergabe},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_5},
  pages     = {263 -- 297},
  year      = {2024},
  abstract  = {Durch das {\"o}ffentliche Baurecht werden die Zul{\"a}ssigkeit, die Grenzen, die Ordnung und die F{\"o}rderung der baulichen Nutzung des Bodens geregelt. Die Ausschreibung und die Vergabe sind von essenzieller Bedeutung f{\"u}r ein Bauvorhaben und werden deshalb in der HOAI mit zwei Leistungsphasen abgebildet: n{\"a}mlich mit der Leistungsphase 6 Vorbereitung der Vergabe sowie der Leistungsphase 7 Mitwirkung bei der Vergabe. Im Zuge der Ausschreibung und der Vergabe werden die f{\"u}r den AG anfallenden Kosten festgelegt und bilden somit die letzte gr{\"o}ßere Stellschraube f{\"u}r Preiseinsparungen.},
  language  = {de}
}