@article{GronsfeldJoachimMalecha2019,
  author    = {Gronsfeld, Richard and Joachim, Klubert and Malecha, Hartmut},
  title     = {3-D-Visualisierung von vorhandenen Staubauwerken zur holistischen Planung und {\"U}berwachung},
  series = {Wasserwirtschaft},
  volume    = {109},
  journal   = {Wasserwirtschaft},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2192-8762},
  doi       = {10.1007/s35147-019-0075-x},
  pages     = {82 -- 85},
  year      = {2019},
  language  = {de}
}
@article{AchtsnichtToedterNiehuesetal.2019,
  author    = {Achtsnicht, Stefan and T{\"o}dter, Julia and Niehues, Julia and Tel{\"o}ken, Matthias and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim and Schr{\"o}per, Florian},
  title     = {3D printed modular immunofiltration columns for frequency mixing-based multiplex magnetic immunodetection},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {1},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19010148},
  pages     = {15 Seiten},
  year      = {2019},
  abstract  = {For performing point-of-care molecular diagnostics, magnetic immunoassays constitute a promising alternative to established enzyme-linked immunosorbent assays (ELISA) because they are fast, robust and sensitive. Simultaneous detection of multiple biomolecular targets from one body fluid sample is desired. The aim of this work is to show that multiplex magnetic immunodetection based on magnetic frequency mixing by means of modular immunofiltration columns prepared for different targets is feasible. By calculations of the magnetic response signal, the required spacing between the modules was determined. Immunofiltration columns were manufactured by 3D printing and antibody immobilization was performed in a batch approach. It was shown experimentally that two different target molecules in a sample solution could be individually detected in a single assaying step with magnetic measurements of the corresponding immobilization filters. The arrangement order of the filters and of a negative control did not influence the results. Thus, a simple and reliable approach to multi-target magnetic immunodetection was demonstrated.},
  language  = {en}
}
@article{OrzadaSolbachGratzetal.2019,
  author    = {Orzada, Stephan and Solbach, Klaus and Gratz, Marcel and Brunheim, Sascha and Fiedler, Thomas M. and Johst, S{\"o}ren and Bitz, Andreas and Shooshtary, Samaneh and Abuelhaija, Asjraf and Voelker, Maximilian N. and Rietsch, Stefan H. G. and Kraff, Oliver and Maderwald, Stefan and Fl{\"o}ser, Martina and Oehmingen, Mark and Quick, Harald H. and Ladd, Mark E.},
  title     = {A 32-channel parallel transmit system add-on for 7T MRI},
  series = {Plos one},
  journal   = {Plos one},
  doi       = {10.1371/journal.pone.0222452},
  year      = {2019},
  language  = {en}
}
@article{BhattaraiStaat2019,
  author    = {Bhattarai, Aroj and Staat, Manfred},
  title     = {A computational study of organ relocation after laparoscopic pectopexy to repair posthysterectomy vaginal vault prolapse},
  series = {Computer Methods in Biomechanics and Biomedical Engineering: Imaging \& Visualization},
  journal   = {Computer Methods in Biomechanics and Biomedical Engineering: Imaging \& Visualization},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {2168-1171},
  doi       = {10.1080/21681163.2019.1670095},
  year      = {2019},
  language  = {en}
}
@article{DantismRoehlenWagneretal.2019,
  author    = {Dantism, Shahriar and R{\"o}hlen, Desiree and Wagner, Torsten and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {A LAPS-based differential sensor for parallelized metabolism monitoring of various bacteria},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {21},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19214692},
  pages     = {Artikel 4692},
  year      = {2019},
  abstract  = {Monitoring the cellular metabolism of bacteria in (bio)fermentation processes is crucial to control and steer them, and to prevent undesired disturbances linked to metabolically inactive microorganisms. In this context, cell-based biosensors can play an important role to improve the quality and increase the yield of such processes. This work describes the simultaneous analysis of the metabolic behavior of three different types of bacteria by means of a differential light-addressable potentiometric sensor (LAPS) set-up. The study includes Lactobacillus brevis, Corynebacterium glutamicum, and Escherichia coli, which are often applied in fermentation processes in bioreactors. Differential measurements were carried out to compensate undesirable influences such as sensor signal drift, and pH value variation during the measurements. Furthermore, calibration curves of the cellular metabolism were established as a function of the glucose concentration or cell number variation with all three model microorganisms. In this context, simultaneous (bio)sensing with the multi-organism LAPS-based set-up can open new possibilities for a cost-effective, rapid detection of the extracellular acidification of bacteria on a single sensor chip. It can be applied to evaluate the metabolic response of bacteria populations in a (bio)fermentation process, for instance, in the biogas fermentation process.},
  language  = {en}
}
@article{LeschingerBirgelHackletal.2019,
  author    = {Leschinger, Tim and Birgel, Stefan and Hackl, Michael and Staat, Manfred and M{\"u}ller, Lars Peter and Wegmann, Kilian},
  title     = {A musculoskeletal shoulder simulation of moment arms and joint reaction forces after medialization of the supraspinatus footprint in rotator cuff repair},
  series = {Computer Methods in Biomechanics and Biomedical Engineering},
  journal   = {Computer Methods in Biomechanics and Biomedical Engineering},
  number    = {Early view},
  publisher = {Taylor \& Francis},
  address   = {London},
  doi       = {10.1080/10255842.2019.1572749},
  year      = {2019},
  language  = {en}
}
@article{LinderBecklerDoerretal.2019,
  author    = {Linder, Peter and Beckler, Matthias and Doerr, Leo and Stoelzle-Feix, Sonja and Fertig, Niels and Jung, Alexander and Staat, Manfred and Gossmann, Matthias},
  title     = {A new in vitro tool to investigate cardiac contractility under physiological mechanical conditions},
  series = {Journal of Pharmacological and Toxicological Methods},
  volume    = {99},
  journal   = {Journal of Pharmacological and Toxicological Methods},
  number    = {Article number 106595},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1056-8719},
  doi       = {10.1016/j.vascn.2019.05.162},
  year      = {2019},
  language  = {en}
}
@article{KetelhutKolditzGoelletal.2019,
  author    = {Ketelhut, Maike and Kolditz, Melanie and G{\"o}ll, Fabian and Braunstein, Bjoern and Albracht, Kirsten and Abel, Dirk},
  title     = {Admittance control of an industrial robot during resistance training},
  series = {IFAC-PapersOnLine},
  volume    = {52},
  journal   = {IFAC-PapersOnLine},
  number    = {19},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2405-8963},
  doi       = {10.1016/j.ifacol.2019.12.102},
  pages     = {223 -- 228},
  year      = {2019},
  abstract  = {Neuromuscular strength training of the leg extensor muscles plays an important role in the rehabilitation and prevention of age and wealth related diseases. In this paper, we focus on the design and implementation of a Cartesian admittance control scheme for isotonic training, i.e. leg extension and flexion against a predefined weight. For preliminary testing and validation of the designed algorithm an experimental research and development platform consisting of an industrial robot and a force plate mounted at its end-effector has been used. Linear, diagonal and arbitrary two-dimensional motion trajectories with different weights for the leg extension and flexion part are applied. The proposed algorithm is easily adaptable to trajectories consisting of arbitrary six-dimensional poses and allows the implementation of individualized trajectories.},
  language  = {en}
}
@article{SchaelAtanasyanBerdugoetal.2019,
  author    = {Schael, S. and Atanasyan, A. and Berdugo, J. and Bretz, T. and Czupalla, Markus and Dachwald, Bernd and Doetinchem, P. von and Duranti, M. and Gast, H. and Karpinski, W. and Kirn, T. and L{\"u}belsmeyer, K. and Ma{\~n}a, C. and Marrocchesi, P.S. and Mertsch, P. and Moskalenko, I.V. and Schervan, T. and Schluse, M. and Schr{\"o}der, K.-U. and Schultz von Dratzig, A. and Senatore, C. and Spies, L. and Wakely, S.P. and Wlochal, M. and Uglietti, D. and Zimmermann, J.},
  title     = {AMS-100: The next generation magnetic spectrometer in space - An international science platform for physics and astrophysics at Lagrange point 2},
  series = {Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  volume    = {944},
  journal   = {Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  number    = {162561},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0168-9002},
  doi       = {10.1016/j.nima.2019.162561},
  year      = {2019},
  language  = {en}
}
@article{WeberEnglhardArentetal.2019,
  author    = {Weber, Tobias and Englhard, Markus and Arent, Jan-Christoph and Hausmann, Joachim},
  title     = {An experimental characterization of wrinkling generated during prepreg autoclave manufacturing using caul plates},
  series = {Journal of Composite Materials},
  volume    = {53},
  journal   = {Journal of Composite Materials},
  number    = {26-27},
  issn      = {1530-793X},
  doi       = {10.1177/0021998319846556},
  pages     = {3757 -- 3773},
  year      = {2019},
  language  = {en}
}