@incollection{KnottSofroniaGerressenetal.2014,
  author    = {Knott, Thomas C. and Sofronia, Raluca E. and Gerressen, Marcus and Law, Yuen and Davidescu, Arjana and Savii, George G. and Gatzweiler, Karl-Heinz and Staat, Manfred and Kuhlen, Torsten W.},
  title     = {Preliminary bone sawing model for a virtual reality-based training simulator of bilateral sagittal split osteotomy},
  series = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)},
  booktitle = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12057-7 (Online)},
  doi       = {10.1007/978-3-319-12057-7_1},
  pages     = {1 -- 10},
  year      = {2014},
  abstract  = {Successful bone sawing requires a high level of skill and experience, which could be gained by the use of Virtual Reality-based simulators. A key aspect of these medical simulators is realistic force feedback. The aim of this paper is to model the bone sawing process in order to develop a valid training simulator for the bilateral sagittal split osteotomy, the most often applied corrective surgery in case of a malposition of the mandible. Bone samples from a human cadaveric mandible were tested using a designed experimental system. Image processing and statistical analysis were used for the selection of four models for the bone sawing process. The results revealed a polynomial dependency between the material removal rate and the applied force. Differences between the three segments of the osteotomy line and between the cortical and cancellous bone were highlighted.},
  language  = {en}
}
@inproceedings{SchirraWatmuffBauschat2014,
  author    = {Schirra, Julian and Watmuff, Jon and Bauschat, J.-Michael},
  title     = {A relative assessment of existing potential-methodologies to accurately estimate the induced drag of highly non-planar lifting systems},
  series = {Advanced aero concepts, design and operations : Applied Aerodynamics Conference : July 22 -24, 2014, Bristol, UK},
  booktitle = {Advanced aero concepts, design and operations : Applied Aerodynamics Conference : July 22 -24, 2014, Bristol, UK},
  organization    = {Applied Aerodynamics Conference <2014, Bristol>},
  pages     = {1 -- 13},
  year      = {2014},
  language  = {en}
}
@inproceedings{PieperSchulz2014,
  author    = {Pieper, Martin and Schulz, Silvia},
  title     = {Teaching Simulation Methods with COMSOL Multiphysics},
  organization    = {COMSOL Conference <2014, Cambridge>},
  pages     = {7},
  year      = {2014},
  abstract  = {This paper describes two courses on simulation methods for graduate students: "Simulation Methods" and "Simulation and Optimization in Virtual Engineering" The courses were planned to teach young engineers how to work with simulation software as well as to understand the necessary mathematical background. As simulation software COMSOL is used. The main philosophy was to combine theory and praxis in a way that motivates the students. In addition "soft skills" should be improved. This was achieved by project work as final examination. As underlying didactical principle the ideas of Bloom's revised taxonomy were followed. The paper basically focusses on educational aspects, e.g. how to structure the course, plan the exercises, organize the project work and include practical COMSOL examples.},
  language  = {en}
}
@article{HandtkeVollandMethlingetal.2014,
  author    = {Handtke, Stefan and Volland, Sonja and Methling, Karen and Albrecht, Dirk and Becher, D{\"o}rte and Nehls, Jenny and Bongaerts, Johannes and Maurer, Karl-Heinz and Lalk, Michael and Liesegang, Heiko and Voigt, Birgit and Daniel, Rolf and Hecker, Michael},
  title     = {Cell physiology of the biotechnological relevant bacterium Bacillus pumilus - An omics-based approach},
  series = {Journal of Biotechnology},
  journal   = {Journal of Biotechnology},
  number    = {192(A)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4863 (E-Journal); 0168-1656 (Print)},
  doi       = {10.1016/j.jbiotec.2014.08.028},
  pages     = {204 -- 214},
  year      = {2014},
  abstract  = {Members of the species Bacillus pumilus get more and more in focus of the biotechnological industry as potential new production strains. Based on exoproteome analysis, B. pumilus strain Jo2, possessing a high secretion capability, was chosen for an omics-based investigation. The proteome and metabolome of B. pumilus cells growing either in minimal or complex medium was analyzed. In total, 1542 proteins were identified in growing B. pumilus cells, among them 1182 cytosolic proteins, 297 membrane and lipoproteins and 63 secreted proteins. This accounts for about 43\% of the 3616 proteins encoded in the B. pumilus Jo2 genome sequence. By using GC-MS, IP-LC/MS and H NMR methods numerous metabolites were analyzed and assigned to reconstructed metabolic pathways. In the genome sequence a functional secretion system including the components of the Sec- and Tat-secretion machinery was found. Analysis of the exoproteome revealed secretion of about 70 proteins with predicted secretion signals. In addition, selected production-relevant genome features such as restriction modification systems and NRPS clusters of B. pumilus Jo2 are discussed.},
  language  = {en}
}
@article{MuribYeapMartensetal.2014,
  author    = {Murib, Mohammed Sharif and Yeap, Weng-Siang and Martens, Daan and Bienstman, Peter and Ceuninck, Ward de and Grinsven, Bart van and Sch{\"o}ning, Michael Josef and Michiels, Luc and Haenen, Ken and Ameloot, Marcel and Serpeng{\"u}zel, Ali and Wagner, Patrick},
  title     = {Photonic detection and characterization of DNA using sapphire microspheres},
  series = {Journal of biomedical optics},
  volume    = {19},
  journal   = {Journal of biomedical optics},
  number    = {9},
  publisher = {SPIE},
  address   = {Bellingham},
  issn      = {1560-2281 (E-Journal); 1083-3668 (Print)},
  doi       = {10.1117/1.JBO.19.9.097006},
  pages     = {097006},
  year      = {2014},
  abstract  = {A microcavity-based deoxyribonucleic acid (DNA) optical biosensor is demonstrated for the first time using synthetic sapphire for the optical cavity. Transmitted and elastic scattering intensity at 1510 nm are analyzed from a sapphire microsphere (radius 500  μm, refractive index 1.77) on an optical fiber half coupler. The 0.43 nm angular mode spacing of the resonances correlates well with the optical size of the sapphire sphere. Probe DNA consisting of a 36-mer fragment was covalently immobilized on a sapphire microsphere and hybridized with a 29-mer target DNA. Whispering gallery modes (WGMs) were monitored before the sapphire was functionalized with DNA and after it was functionalized with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA). The shift in WGMs from the surface modification with DNA was measured and correlated well with the estimated thickness of the add-on DNA layer. It is shown that ssDNA is more uniformly oriented on the sapphire surface than dsDNA. In addition, it is shown that functionalization of the sapphire spherical surface with DNA does not affect the quality factor (Q≈104) of the sapphire microspheres. The use of sapphire is especially interesting because this material is chemically resilient, biocompatible, and widely used for medical implants.},
  language  = {en}
}
@article{SiqueiraMolinnusBegingetal.2014,
  author    = {Siqueira, Jose R. and Molinnus, Denise and Beging, Stefan and Sch{\"o}ning, Michael Josef},
  title     = {Incorporating a hybrid urease-carbon nanotubes sensitive nanofilm on capacitive field-effect sensors for urea detection},
  series = {Analytical chemistry},
  volume    = {86},
  journal   = {Analytical chemistry},
  number    = {11},
  publisher = {ACS Publications},
  address   = {Columbus},
  issn      = {1520-6882 (E-Journal); 0003-2700 (Print); 0096-4484 (Print)},
  doi       = {10.1021/ac500458s},
  pages     = {5370 -- 5375},
  year      = {2014},
  abstract  = {The ideal combination among biomolecules and nanomaterials is the key for reaching biosensing units with high sensitivity. The challenge, however, is to find out a stable and sensitive film architecture that can be incorporated on the sensor's surface. In this paper, we report on the benefits of incorporating a layer-by-layer (LbL) nanofilm of polyamidoamine (PAMAM) dendrimer and carbon nanotubes (CNTs) on capacitive electrolyte-insulator-semiconductor (EIS) field-effect sensors for detecting urea. Three sensor arrangements were studied in order to investigate the adequate film architecture, involving the LbL film with the enzyme urease: (i) urease immobilized directly onto a bare EIS [EIS-urease] sensor; (ii) urease atop the LbL film over the EIS [EIS-(PAMAM/CNT)-urease] sensor; and (iii) urease sandwiched between the LbL film and another CNT layer [EIS-(PAMAM/CNT)-urease-CNT]. The surface morphology of all three urea-based EIS biosensors was investigated by atomic force microscopy (AFM), while the biosensing abilities were studied by means of capacitance-voltage (C/V) and dynamic constant-capacitance (ConCap) measureaments at urea concentrations ranging from 0.1 mM to 100 mM. The EIS-urease and EIS-(PAMAM/CNT)-urease sensors showed similar sensitivity (∼18 mV/decade) and a nonregular signal behavior as the urea concentration increased. On the other hand, the EIS-(PAMAM/CNT)-urease-CNT sensor exhibited a superior output signal performance and higher sensitivity of about 33 mV/decade. The presence of the additional CNT layer was decisive to achieve a urea based EIS sensor with enhanced properties. Such sensitive architecture demonstrates that the incorporation of an adequate hybrid enzyme-nanofilm as sensing unit opens new prospects for biosensing applications using the field-effect sensor platform.},
  language  = {en}
}
@article{SrivastavaLahiriMaitietal.2014,
  author    = {Srivastava, A. and Lahiri, S. and Maiti, M. and Knolle, F. and Hoyler, Friedrich and Scherer, Ulrich W. and Schnug, E. W.},
  title     = {Study of naturally occurring radioactive material (NORM) in top soil of Punjab State from the North Western part of India},
  series = {Journal of Radioanalytical and Nuclear Chemistry},
  volume    = {2014},
  journal   = {Journal of Radioanalytical and Nuclear Chemistry},
  number    = {302},
  publisher = {Springer Nature},
  address   = {Basel},
  issn      = {1588-2780 (E-Journal); 0022-4081 (Print); 0134-0719 (Print); 0236-5731 (Print); 1417-2097 (Print)},
  doi       = {0.1007/s10967-014-3450-1},
  pages     = {1049 -- 1052},
  year      = {2014},
  language  = {en}
}
@article{FateriGebhardtThuemmleretal.2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura},
  title     = {Experimental investigation on selective laser melting of glass},
  series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  volume    = {56 (2014)},
  journal   = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  doi       = {10.1016/j.phpro.2014.08.118},
  pages     = {357 -- 364},
  year      = {2014},
  language  = {en}
}
@article{NachtrodtTietschMostaccietal.2014,
  author    = {Nachtrodt, Frederik and Tietsch, Wolfgang and Mostacci, Domiziano and Scherer, Ulrich W.},
  title     = {Set-up and first operation of a plasma oven for treatment of low level radioactive wastes},
  series = {Nuclear technology and radiation protection},
  volume    = {29},
  journal   = {Nuclear technology and radiation protection},
  number    = {Suppl.},
  publisher = {VINČA Institute of Nuclear Sciences},
  address   = {Belgrad},
  issn      = {1451-3994},
  doi       = {10.2298/NTRP140SS47N},
  pages     = {47 -- 51},
  year      = {2014},
  language  = {en}
}
@article{MalechaKlubertHeinenFuchs2014,
  author    = {Malecha, Hartmut and Klubert, J. and Heinen-Fuchs, Sabine},
  title     = {Laserscanning passe? 3-D-Oberfl{\"a}chenmodelle aus Bilddaten und deren messtechnischer Nutzen},
  series = {Wasserwirtschaft},
  volume    = {Jg. 104},
  journal   = {Wasserwirtschaft},
  number    = {Nr. 9},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  pages     = {32 -- 35},
  year      = {2014},
  language  = {de}
}