@article{PoghossianWeilCherstvyetal.2013,
  author    = {Poghossian, Arshak and Weil, M. and Cherstvy, A. G. and Sch{\"o}ning, Michael Josef},
  title     = {Electrical monitoring of polyelectrolyte multilayer formation by means of capacitive field-effect devices},
  series = {Analytical and bioanalytical chemistry},
  volume    = {405},
  journal   = {Analytical and bioanalytical chemistry},
  number    = {20},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1130 ; 1618-2642},
  doi       = {10.1007/s00216-013-6951-9},
  pages     = {6425 -- 6436},
  year      = {2013},
  abstract  = {The semiconductor field-effect platform represents a powerful tool for detecting the adsorption and binding of charged macromolecules with direct electrical readout. In this work, a capacitive electrolyte-insulator-semiconductor (EIS) field-effect sensor consisting of an Al-p-Si-SiO2 structure has been applied for real-time in situ electrical monitoring of the layer-by-layer formation of polyelectrolyte (PE) multilayers (PEM). The PEMs were deposited directly onto the SiO2 surface without any precursor layer or drying procedures. Anionic poly(sodium 4-styrene sulfonate) and cationic weak polyelectrolyte poly(allylamine hydrochloride) have been chosen as a model system. The effect of the ionic strength of the solution, polyelectrolyte concentration, number and polarity of the PE layers on the characteristics of the PEM-modified EIS sensors have been studied by means of capacitance-voltage and constant-capacitance methods. In addition, the thickness, surface morphology, roughness and wettabilityof the PE mono- and multilayers have been characterised by ellipsometry, atomic force microscopy and water contact-angle methods, respectively. To explain potential oscillations on the gate surface and signal behaviour of the capacitive field-effect EIS sensor modified with a PEM, a simplified electrostatic model that takes into account the reduced electrostatic screening of PE charges by mobile ions within the PEM has been proposed and discussed.},
  language  = {en}
}
@article{WernerWagnerYoshinobuetal.2013,
  author    = {Werner, Frederik and Wagner, Torsten and Yoshinobu, Tatsuo and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Frequency behaviour of light-addressable potentiometric sensors},
  series = {Physica Status Solidi (A)},
  volume    = {210},
  journal   = {Physica Status Solidi (A)},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-396X ; 0031-8965},
  doi       = {10.1002/pssa.201200929},
  pages     = {884 -- 891},
  year      = {2013},
  abstract  = {Light-addressable potentiometric sensors (LAPS) are semiconductor-based potentiometric sensors, with the advantage to detect the concentration of a chemical species in a liquid solution above the sensor surface in a spatially resolved manner. The addressing is achieved by a modulated and focused light source illuminating the semiconductor and generating a concentration-depending photocurrent. This work introduces a LAPS set-up that is able to monitor the electrical impedance in addition to the photocurrent. The impedance spectra of a LAPS structure, with and without illumination, as well as the frequency behaviour of the LAPS measurement are investigated. The measurements are supported by electrical equivalent circuits to explain the impedance and the LAPS-frequency behaviour. The work investigates the influence of different parameters on the frequency behaviour of the LAPS. Furthermore, the phase shift of the photocurrent, the influence of the surface potential as well as the changes of the sensor impedance will be discussed.},
  language  = {en}
}
@article{ItabashiKosakaMiyamotoetal.2013,
  author    = {Itabashi, Akinori and Kosaka, Naoki and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {High-speed chemical imaging system based on front-side-illuminated LAPS},
  series = {Sensors and actuators B: Chemical},
  volume    = {182},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077},
  doi       = {10.1016/j.snb.2013.03.016},
  pages     = {315 -- 321},
  year      = {2013},
  abstract  = {The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the spatial distribution of specific ions on the sensing surface. The conventional chemical imaging system based on the light-addressable potentiometric sensor (LAPS), however, required a long time to obtain a chemical image, due to the slow mechanical scan of a single light beam. For high-speed imaging, a plurality of light beams modulated at different frequencies can be employed to measure the ion concentrations simultaneously at different locations on the sensor plate by frequency division multiplex (FDM). However, the conventional measurement geometry of back-side illumination limited the bandwidth of the modulation frequency required for FDM measurement, because of the low-pass filtering characteristics of carrier diffusion in the Si substrate. In this study, a high-speed chemical imaging system based on front-side-illuminated LAPS was developed, which achieved high-speed spatiotemporal recording of pH change at a rate of 70 frames per second.},
  language  = {en}
}
@inproceedings{Engels2013,
  author    = {Engels, Elmar},
  title     = {A field bus library for MATLAB based on open core engineering},
  series = {Proceedings to the 14th International Workshop on Research and Education in Mechatronics, REM 2013, Wien, 05.06.-06.06.2013.},
  booktitle = {Proceedings to the 14th International Workshop on Research and Education in Mechatronics, REM 2013, Wien, 05.06.-06.06.2013.},
  isbn      = {978-3-90275-907-8},
  year      = {2013},
  language  = {en}
}
@book{Mueller2013,
  author    = {M{\"u}ller, Thomas},
  title     = {K{\"o}rperschaftsteuergesetz / Unter Mitarb. von ... Thomas M{\"u}ller ...},
  editor    = {M{\"o}ssner, Manfred},
  publisher = {NWB Verl.},
  address   = {Herne},
  isbn      = {978-3-482-64311-8},
  pages     = {XXIV, 2048 S.},
  year      = {2013},
  language  = {de}
}
@article{LindenFischoederLaacketal.2013,
  author    = {Linden, A. and Fisch{\"o}der, M. and Laack, Walter van and Staat, Manfred},
  title     = {Einschr{\"a}nkung von Taluskippung und -vorschub durch Sprunggelenkorthesen nach fibularer Bandruptur},
  series = {OUP Zeitschrift f{\"u}r die orthop{\"a}dische und unfallchirurgische Praxis},
  volume    = {2},
  journal   = {OUP Zeitschrift f{\"u}r die orthop{\"a}dische und unfallchirurgische Praxis},
  number    = {6},
  publisher = {Deutscher {\"A}rzte-Verl.},
  address   = {K{\"o}ln},
  isbn      = {2193-5785},
  doi       = {10.3238/oup.2013.0306-0309},
  pages     = {306 -- 309},
  year      = {2013},
  abstract  = {Die fibulare Bandruptur z{\"a}hlt zu einer der am h{\"a}ufigsten auftretenden Verletzungen des Bewegungsapparats. In den meisten F{\"a}llen wird heute die konservativ fr{\"u}hfunktionelle Therapie mit Sprunggelenkorthesen allgemein bevorzugt. Im Rahmen der vorliegenden Studie wurden 14 verschiedene Sprunggelenkorthesen im Hinblick auf ihre Einschr{\"a}nkung von Taluskippung und Talusvorschub untersucht. Zur Simulation einer fibularen Bandruptur wurde ein Unterschenkelmodell aus Holz mit Fußteil, mit angelegten Orthesen in einen Scheuba-Halteapparat eingespannt und mit 150 N seitlich sowie anterior-posterior belastet. Anhand der erstellten "gehaltenen" R{\"o}ntgenaufnahmen konnten Taluskippung und Talusvorschub jeder einzelnen Orthese eindeutig bestimmt werden. Die meisten Orthesen erreichten zufriedenstellende Ergebnisse. Es stellte sich heraus, dass vor allem eine eng anliegende, im Gelenkbereich anatomisch angepasste Form vorteilhaft zu sein scheint.},
  language  = {de}
}
@article{Mueller2013,
  author    = {M{\"u}ller, Thomas},
  title     = {Aufweichung der Gewaltenteilung und Demokratieverlust - Achtung vor dem Parlament. Darstellung einer Rechtsch{\"o}pfung der Exekutive im Umfeld des \S15 AStG},
  series = {Der Betrieb},
  journal   = {Der Betrieb},
  number    = {11},
  publisher = {Fachmedien Otto Schmidt},
  address   = {D{\"u}sseldorf},
  issn      = {0005-9935},
  pages     = {542 -- 548},
  year      = {2013},
  language  = {de}
}
@incollection{WolfFraentz2013,
  author    = {Wolf, Martin and Fr{\"a}ntz, Birgit},
  title     = {Erfolgreiches IT-Marketing},
  series = {Erfolgreiches IT-Marketing in Zeiten von Social Media, Cloud \& Co. - (CIO-Handbuch ; 2)},
  booktitle = {Erfolgreiches IT-Marketing in Zeiten von Social Media, Cloud \& Co. - (CIO-Handbuch ; 2)},
  edition   = {1. Auflage},
  publisher = {Symposion Publishing},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-86329-612-4},
  pages     = {123 -- 140},
  year      = {2013},
  language  = {de}
}
@article{SchneiderSchneider2013,
  author    = {Schneider, Bettina and Schneider, Wilhelm},
  title     = {Rechnungslegung nach IFRS im Vergleich zum HGB},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {536 -- 541},
  year      = {2013},
  language  = {de}
}
@inproceedings{Engels2013,
  author    = {Engels, Elmar},
  title     = {Industrieantriebe mit sercos Schnittstelle {\"u}ber MATLAB steuern},
  series = {Tagungsband AALE 2013 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 10. Fachkonferenz, Stralsund},
  booktitle = {Tagungsband AALE 2013 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 10. Fachkonferenz, Stralsund},
  publisher = {DIV Dt. Industrieverl.},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8356-3364-3},
  pages     = {223 -- 232},
  year      = {2013},
  language  = {de}
}