@inproceedings{Wahle1983,
  author    = {Wahle, Michael},
  title     = {Calculation of the response of heat exchanger tubes with regard to nonlinear and prestressing effects},
  series = {Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1},
  booktitle = {Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1},
  publisher = {British Nuclear Energy Society},
  address   = {London},
  isbn      = {0-7277-0192-4 (Druckausg.)},
  pages     = {162 -- 183},
  year      = {1983},
  language  = {en}
}
@inproceedings{Wahle1987,
  author    = {Wahle, Michael},
  title     = {Optimale Auslegung von Schwingungsd{\"a}mpfern zur Schwingungsberuhigung elastischer Strukturen},
  series = {D{\"a}mpfung von Schwingungen bei Maschinen und Bauwerken : Tagung N{\"u}rnberg, 9. u. 10. April 1987. - (VDI-Berichte ; 627)},
  booktitle = {D{\"a}mpfung von Schwingungen bei Maschinen und Bauwerken : Tagung N{\"u}rnberg, 9. u. 10. April 1987. - (VDI-Berichte ; 627)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-090627-8},
  pages     = {355 -- 373},
  year      = {1987},
  language  = {de}
}
@inproceedings{PflugWahle1994,
  author    = {Pflug, J. and Wahle, Michael},
  title     = {Auslegung der CFK-Sandwich-Rumpfstruktur eines Hubschraubers mit der Methode der Finiten Elemente},
  series = {Basistechnologien f{\"u}r neue Herausforderungen in der Luft- und Raumfahrt : DGLR-Jahrestagung / Deutscher Luft- und Raumfahrt-Kongress 1994, Erlangen, 04.- 07. Oktober 1994. - (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt ; 1994,3)},
  booktitle = {Basistechnologien f{\"u}r neue Herausforderungen in der Luft- und Raumfahrt : DGLR-Jahrestagung / Deutscher Luft- und Raumfahrt-Kongress 1994, Erlangen, 04.- 07. Oktober 1994. - (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt ; 1994,3)},
  editor    = {B{\"u}rger, Gudrun},
  publisher = {DGLR},
  address   = {Bonn},
  pages     = {1135 -- 1144},
  year      = {1994},
  language  = {de}
}
@inproceedings{ThenentDahmann2011,
  author    = {Thenent, N. E. and Dahmann, Peter},
  title     = {Hydrostatic propeller drive},
  series = {Proceedings of the conference : 18 - 20 May, 2011 Tampere, Finland / the Twelth Scandinavian International Conference on Fluid Power, SICFP'11. Ed.: Harri Sairiala ... Vol. 1},
  booktitle = {Proceedings of the conference : 18 - 20 May, 2011 Tampere, Finland / the Twelth Scandinavian International Conference on Fluid Power, SICFP'11. Ed.: Harri Sairiala ... Vol. 1},
  address   = {Tampere},
  isbn      = {978-952-15-2517-9},
  pages     = {217 -- 227},
  year      = {2011},
  language  = {en}
}
@inproceedings{ThenentDahmann2011,
  author    = {Thenent, N. E. and Dahmann, Peter},
  title     = {Increasing aircraft design flexibility - The development of a hydrostatic transmission for gliders with self-launching capability},
  series = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  publisher = {Dt. Gesellschaft f{\"u}r Luft- und Raumfahrt},
  address   = {Bonn},
  isbn      = {978-3-9321-8274-7},
  pages     = {865 -- 883},
  year      = {2011},
  language  = {en}
}
@inproceedings{Dahmann2011,
  author    = {Dahmann, Peter},
  title     = {Stemme S10 VTX als multifunktionales Forschungsflugzeug},
  series = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  publisher = {Dt. Gesellschaft f{\"u}r Luft- und Raumfahrt},
  address   = {Bonn},
  isbn      = {978-3-9321-8274-7},
  pages     = {357 -- 364},
  year      = {2011},
  language  = {de}
}
@inproceedings{BraunBouckeBallmann2005,
  author    = {Braun, Carsten and Boucke, Alexander and Ballmann, Josef},
  title     = {Numerical prediction of the wing deformation of a high speed transport aircraft type wind tunnel model by direct aeroelastic simulation},
  series = {Conference proceedings : CEAS/AIAA/DGLR International Forum on Aeroelasticity and Structural Dynamics IFASD 2005 : M{\"u}nchen, June 28 - July 1, 2005. DGLR-Bericht. 2005,04},
  booktitle = {Conference proceedings : CEAS/AIAA/DGLR International Forum on Aeroelasticity and Structural Dynamics IFASD 2005 : M{\"u}nchen, June 28 - July 1, 2005. DGLR-Bericht. 2005,04},
  publisher = {DGLR},
  address   = {Bonn},
  isbn      = {3-932182-43-X},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {en}
}
@inproceedings{KorschDafnisReimerdesetal.2006,
  author    = {Korsch, Helge and Dafnis, Athanasios and Reimerdes, Hans-G{\"u}nther and Braun, Carsten and Ballmann, Josef},
  title     = {Dynamic qualification of the HIRENASD elastic wing model},
  series = {Motto: Luft- und Raumfahrt: Lehre, Forschung, Industrie - gemeinsam innovativ. Deutscher Luft- und Raumfahrtkongress 2006 : Braunschweig, 06. bis 09. November 2006. Jahrbuch / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt. 2006},
  booktitle = {Motto: Luft- und Raumfahrt: Lehre, Forschung, Industrie - gemeinsam innovativ. Deutscher Luft- und Raumfahrtkongress 2006 : Braunschweig, 06. bis 09. November 2006. Jahrbuch / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt. 2006},
  publisher = {Dt. Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth (DGLR)},
  address   = {Bonn},
  pages     = {1441 -- 1450},
  year      = {2006},
  language  = {en}
}
@inproceedings{BallmannDafnisBraunetal.2006,
  author    = {Ballmann, Josef and Dafnis, Athanasios and Braun, Carsten and Korsch, Helge and Reimerdes, Hans-G{\"u}nther and Braun, Carsten and Ballmann, Josef},
  title     = {The HIRENASD project: High Reynolds number aerostructural dynamics experiments in the European Transonic Wind Tunnel (ETW)},
  series = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences},
  booktitle = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences},
  publisher = {Optimage},
  address   = {Edinburgh},
  organization    = {International Council of the Aeronautical Sciences (ICAS)},
  isbn      = {0-9533991-7-6},
  pages     = {Paper No. 2006-5.11.2},
  year      = {2006},
  language  = {en}
}
@inproceedings{ReimerBraunBallmann2006,
  author    = {Reimer, Lars and Braun, Carsten and Ballmann, Josef},
  title     = {Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation},
  series = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences},
  booktitle = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences},
  publisher = {Optimage},
  address   = {Edinburgh},
  organization    = {International Council of the Aeronautical Sciences (ICAS)},
  isbn      = {0-9533991-7-6},
  pages     = {Paper No. 2006-10.3.3},
  year      = {2006},
  language  = {en}
}
@inproceedings{WellmerChenBraunetal.2007,
  author    = {Wellmer, Georg and Chen, B.-H. and Braun, Carsten and Ballmann, Josef},
  title     = {Numerical prediction of aeroelastic effects on twin-sting-rig mounted models for rear fuselage and empennage flow investigation in transonic windtunnel},
  series = {Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics, June 18 - 21, 2007, Stockholm, Sweden},
  booktitle = {Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics, June 18 - 21, 2007, Stockholm, Sweden},
  publisher = {KTH},
  address   = {Stockholm},
  organization    = {Confederation of European Aerospace Societies ; American Institute of Aeronautics and Astronautics, Reston, Va. ; Kungliga Tekniska H{\"o}gskolan, Stockholm},
  pages     = {1 CD-ROM},
  year      = {2007},
  language  = {en}
}
@inproceedings{ReimerBraunChenetal.2007,
  author    = {Reimer, Lars and Braun, Carsten and Chen, B.-H. and Ballmann, Josef},
  title     = {Computational aeroelastic analysis and design of the HIRENASD wind tunnel wing model and tests},
  series = {Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden},
  booktitle = {Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden},
  publisher = {KTH},
  address   = {Stockholm},
  pages     = {1 CD-ROM},
  year      = {2007},
  language  = {en}
}
@inproceedings{KapoorBraunBoller2010,
  author    = {Kapoor, Hrshi and Braun, Carsten and Boller, Christian},
  title     = {Modelling and optimisation of maintenance intervals to realize structural health monitoring applications on aircraft},
  series = {Structural health monitoring 2010 : proceedings of the Fifth European Workshop on Structural Health Monitoring held at Sorrento, Naples, Italy, June 28 - July 4, 2010 ; [EWSHM]},
  booktitle = {Structural health monitoring 2010 : proceedings of the Fifth European Workshop on Structural Health Monitoring held at Sorrento, Naples, Italy, June 28 - July 4, 2010 ; [EWSHM]},
  editor    = {Casciati, Fabio},
  publisher = {DEStech Publ.},
  address   = {Lancaster, Pa.},
  isbn      = {978-1-60595-024-2},
  pages     = {55 -- 63},
  year      = {2010},
  language  = {en}
}
@inproceedings{KapoorBollerGiljohannetal.2010,
  author    = {Kapoor, Hrshi and Boller, Christian and Giljohann, Sebastian and Braun, Carsten},
  title     = {Strategies for structural health monitoring implementation potential assessment in aircraft operational life extension considerations},
  series = {2nd International Symposium on NDT in Aerospace : November 22-24, 2010 Hamburg, Germany},
  booktitle = {2nd International Symposium on NDT in Aerospace : November 22-24, 2010 Hamburg, Germany},
  publisher = {Dt. Gesellschaft f{\"u}r Zerst{\"o}rungsfreie Pr{\"u}fung},
  address   = {Berlin},
  organization    = {Deutsche Gesellschaft f{\"u}r Zerst{\"o}rungsfreie Pr{\"u}fung},
  isbn      = {978-3-940283-28-3},
  pages     = {9},
  year      = {2010},
  language  = {en}
}
@inproceedings{OlaruKowalskiSethietal.2011,
  author    = {Olaru, Alexandra Maria and Kowalski, Julia and Sethi, Vaishali and Bl{\"u}mich, Bernhard},
  title     = {Fluid Transport in Porous Media probed by Relaxation-Exchange NMR},
  series = {2011 Fall Meeting, AGU, San Francisco, Calif., 5-9 Dec.},
  booktitle = {2011 Fall Meeting, AGU, San Francisco, Calif., 5-9 Dec.},
  year      = {2011},
  language  = {en}
}
@inproceedings{KowalskiBugnion2009,
  author    = {Kowalski, Julia and Bugnion, Louis},
  title     = {An extended shallow flow theory for natural debris flows},
  volume    = {41},
  number    = {7},
  pages     = {609 -- 609},
  year      = {2009},
  language  = {de}
}
@inproceedings{KowalskiMcElwaine2008,
  author    = {Kowalski, Julia and McElwaine, J.},
  title     = {Two-phase debris flow modeling},
  series = {Geophysical Research Abstracts},
  booktitle = {Geophysical Research Abstracts},
  year      = {2008},
  language  = {en}
}
@inproceedings{KowalskiBarteltMcElwaine2007,
  author    = {Kowalski, Julia and Bartelt, Perry and McElwaine, J.},
  title     = {Two-phase debris flow modeling},
  series = {Geophysical Research Abstracts},
  booktitle = {Geophysical Research Abstracts},
  year      = {2007},
  language  = {en}
}
@inproceedings{KowalskiMcArdellBartelt2006,
  author    = {Kowalski, Julia and McArdell, B. W. and Bartelt, Perry},
  title     = {A comparison of two approaches to modeling multiphase gravity currents},
  series = {Geophysical Research Abstracts},
  volume    = {8},
  booktitle = {Geophysical Research Abstracts},
  year      = {2006},
  language  = {en}
}
@inproceedings{Kowalski2006,
  author    = {Kowalski, Julia},
  title     = {Numerical Debris Flow Simulation},
  series = {Schweizer Numerik Kolloquium : Book of Abstracts 12. April 2006},
  booktitle = {Schweizer Numerik Kolloquium : Book of Abstracts 12. April 2006},
  pages     = {1},
  year      = {2006},
  language  = {en}
}
@inproceedings{ChristenBarteltKowalskietal.2008,
  author    = {Christen, Marc and Bartelt, Perry and Kowalski, Julia and Stoffel, Lukus},
  title     = {Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation programm RAMMS},
  series = {Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008},
  booktitle = {Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008},
  pages     = {709 -- 716},
  year      = {2008},
  abstract  = {Numerical models have become an essential part of snow avalanche engineering. Recent advances in understanding the rheology of flowing snow and the mechanics of entrainment and deposition have made numerical models more reliable. Coupled with field observations and historical records, they are especially helpful in understanding avalanche flow in complex terrain. However, the application of numerical models poses several new challenges to avalanche engineers. A detailed understanding of the avalanche phenomena is required to specify initial conditions (release zone dimensions and snowcover entrainment rates) as well as the friction parameters, which are no longer based on empirical back-calculations, rather terrain roughness, vegetation and snow properties. In this paper we discuss these problems by presenting the computer model RAMMS, which was specially designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged equations governing avalanche flow with first and second-order numerical solution schemes. A tremendous effort has been invested in the implementation of advanced input and output features. Simulation results are therefore clearly and easily visualized to simplify their interpretation. More importantly, RAMMS has been applied to a series of well-documented avalanches to gauge model performance. In this paper we present the governing differential equations, highlight some of the input and output features of RAMMS and then discuss the simulation of the Gatschiefer avalanche that occurred in April 2008, near Klosters/Monbiel, Switzerland.},
  language  = {en}
}
@inproceedings{KnoblochKowalskiBoesigeretal.2011,
  author    = {Knobloch, V. and Kowalski, Julia and B{\"o}siger, P. and Kozerke, S.},
  title     = {Probabilistic Streamline Estimation from Accelerated Fourier Velocity Encoded Measurements},
  series = {Proceedings of the 19th ISMRM International Society for Magnetic Resonance in Medicine},
  booktitle = {Proceedings of the 19th ISMRM International Society for Magnetic Resonance in Medicine},
  pages     = {1215 -- 1215},
  year      = {2011},
  language  = {de}
}
@inproceedings{BoernerFunkeHendricketal.2009,
  author    = {B{\"o}rner, Sebastian and Funke, Harald and Hendrick, P. and Recker, E.},
  title     = {LES of Jets In Cross-Flow and Application to the "Micromix" Hydrogen Combustion},
  series = {XIX International Symposium on Air Breathing Engines 2009 (ISABE 2009) : Proceedings of a meeting held 7-11 September 2009, Montreal, Canada},
  booktitle = {XIX International Symposium on Air Breathing Engines 2009 (ISABE 2009) : Proceedings of a meeting held 7-11 September 2009, Montreal, Canada},
  isbn      = {9781615676064},
  pages     = {1555 -- 1561},
  year      = {2009},
  language  = {en}
}
@inproceedings{FunkeBoernerKeinzetal.2012,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Keinz, Jan and Hendrick, P. and Recker, E.},
  title     = {Low NOx Hydrogen combustion chamber for industrial gas turbine applications", 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery},
  series = {ISROMAC-14 : the Forteenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; Honolulu, Hawaii, February 27 - March 02nd, 2012},
  booktitle = {ISROMAC-14 : the Forteenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; Honolulu, Hawaii, February 27 - March 02nd, 2012},
  year      = {2012},
  language  = {en}
}
@inproceedings{FunkeBoernerKeinzetal.2012,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Keinz, Jan and Kusterer, K. and Kroninger, D. and Kitajima, J. and Kazari, M. and Horikama, A.},
  title     = {Numerical and experimental characterization of low NOx Micromix combustion principle for industrial hydrogen gas turbine applications},
  series = {Proceedings of ASME Turbo Expo 2012},
  booktitle = {Proceedings of ASME Turbo Expo 2012},
  pages     = {11},
  year      = {2012},
  language  = {en}
}
@inproceedings{HavermannSeilerHenning2010,
  author    = {Havermann, Marc and Seiler, F. and Henning, P.},
  title     = {Shock Tunnel Experiments and CFD Simulation of Lateral Jet Interaction in Hypersonic Flows},
  series = {New Results in Numerical and Experimental Fluid Mechanics VII; Contributions to the 16th STAB/DGLR Symposium Aachen, Germany 2008},
  booktitle = {New Results in Numerical and Experimental Fluid Mechanics VII; Contributions to the 16th STAB/DGLR Symposium Aachen, Germany 2008},
  editor    = {Dillmann, Andreas and Heller, Gerd and Klaas, Michael and Kreplin, Hans-Peter and Nitsche, Wolfgang and Schr{\"o}der, Wolfgang},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {9783642142437},
  doi       = {10.1007/978-3-642-14243-7_45},
  pages     = {365 -- 372},
  year      = {2010},
  language  = {en}
}
@inproceedings{FunkeBoernerHendricketal.2013,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Hendrick, P. and Recker, E. and Elsing, R.},
  title     = {Development and integration of a scalable low NOx combustion chamber for a hydrogen fuelled aero gas turbine},
  series = {Progress in Propulsion Physics. - Vol. 4},
  booktitle = {Progress in Propulsion Physics. - Vol. 4},
  editor    = {DeLuca, Luigi T.},
  publisher = {EDP Sciences},
  address   = {[Les Ulis]},
  isbn      = {978-2-7598-0876-2},
  doi       = {10.1051/eucass/201304357},
  pages     = {357 -- 372},
  year      = {2013},
  language  = {en}
}
@inproceedings{RoethStark2009,
  author    = {R{\"o}th, Thilo and Stark, R.},
  title     = {Die Rolle der virtuellen Produktentstehung bei der Integration von Karosseriesystemen},
  series = {Karosseriekongress Systemintegration in der Karosserietechnik : 17. und 18. M{\"a}rz 2009 in Baden-Baden / Kongressleitung: Reiner Stark},
  booktitle = {Karosseriekongress Systemintegration in der Karosserietechnik : 17. und 18. M{\"a}rz 2009 in Baden-Baden / Kongressleitung: Reiner Stark},
  publisher = {VDI-Wissensforum},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-9812624-4-5},
  pages     = {175 S. : zahlr. Ill., graph. Darst.},
  year      = {2009},
  language  = {de}
}
@inproceedings{Mertens2001,
  author    = {Mertens, Josef},
  title     = {Next steps envisaged to improve wing performance of commercial aircraft},
  series = {Aerodynamic drag reduction technologies : proceedings of the CEAS/DragNet European Drag Reduction Conference, 19-21 June 2000, Potsdam, Germany. - (Notes on numerical fluid mechanics ; 76)},
  booktitle = {Aerodynamic drag reduction technologies : proceedings of the CEAS/DragNet European Drag Reduction Conference, 19-21 June 2000, Potsdam, Germany. - (Notes on numerical fluid mechanics ; 76)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-41911-X (Print)},
  doi       = {10.1007/978-3-540-45359-8_26},
  pages     = {246 -- 255},
  year      = {2001},
  language  = {en}
}
@inproceedings{DigelDachwaldArtmannetal.2009,
  author    = {Digel, Ilya and Dachwald, Bernd and Artmann, Gerhard and Linder, Peter and Funke, O.},
  title     = {A concept of a probe for particle analysis and life detection in icy environments},
  year      = {2009},
  abstract  = {A melting probe equipped with autofluorescence-based detection system combined with a light scattering unit, and, optionally, with a microarray chip would be ideally suited to probe icy environments like Europa's ice layer as well as the polar ice layers of Earth and Mars for recent and extinct live.},
  subject      = {Sonde},
  language  = {en}
}
@inproceedings{DachwaldXuFeldmannetal.2011,
  author    = {Dachwald, Bernd and Xu, Changsheng and Feldmann, Marco and Plescher, Engelbert and Digel, Ilya and Artmann, Gerhard},
  title     = {Development and testing of a subsurface probe for detection of life in deep ice : [abstract]},
  year      = {2011},
  abstract  = {We present the novel concept of a combined drilling and melting probe for subsurface ice research. This probe, named "IceMole", is currently developed, built, and tested at the FH Aachen University of Applied Sciences' Astronautical Laboratory. Here, we describe its first prototype design and report the results of its field tests on the Swiss Morteratsch glacier. Although the IceMole design is currently adapted to terrestrial glaciers and ice shields, it may later be modified for the subsurface in-situ investigation of extraterrestrial ice, e.g., on Mars, Europa, and Enceladus. If life exists on those bodies, it may be present in the ice (as life can also be found in the deep ice of Earth).},
  subject      = {Eisschicht},
  language  = {en}
}
@inproceedings{DachwaldMikuckiTulaczyketal.2012,
  author    = {Dachwald, Bernd and Mikucki, Jill A. and Tulaczyk, Slawek and Digel, Ilya and Feldmann, Marco and Espe, Clemens and Plescher, Engelbert and Xu, Changsheng},
  title     = {IceMole - a maneuverable probe for clean in-situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems : extended abstract / SCAR Open Science Conference 2012, Session 29: Advancing Clean Technologies for Exploration of Glacial Aquatic Ecosystems},
  year      = {2012},
  abstract  = {The "IceMole" is a novel maneuverable subsurface ice probe for clean in-situ analysis and sampling of subsurface ice and subglacial water/brine. It is developed and build at FH Aachen University of Applied Sciences' Astronautical Laboratory. A first prototype was successfully tested on the Swiss Morteratsch glacier in 2010. Clean sampling is achieved with a hollow ice screw (as it is used in mountaineering) at the tip of the probe. Maneuverability is achieved with a differentially heated melting head. Funded by the German Space Agency (DLR), a consortium led by FH Aachen currently develops a much more advanced IceMole probe, which includes a sophisticated system for obstacle avoidance, target detection, and navigation in the ice. We intend to use this probe for taking clean samples of subglacial brine at the Blood Falls (McMurdo Dry Valleys, East Antarctica) for chemical and microbiological analysis. In our conference contribution, we 1) describe the IceMole design, 2) report the results of the field tests of the first prototype on the Morteratsch glacier, 3) discuss the probe's potential for the clean in-situ analysis and sampling of subsurface ice and subglacial liquids, and 4) outline the way ahead in the development of this technology.},
  subject      = {Eisschicht},
  language  = {en}
}
@inproceedings{Mertens2000,
  author    = {Mertens, Josef},
  title     = {Laminar leading edges: manufacturing, contamination, and operational aspects - results from the German RaWid programme},
  year      = {2000},
  abstract  = {RaWid was the German national technology programme on transonic aerodynamics and supporting technologies, lasting from 1995 to 1998. One of the main topics was laminar wing development. Besides aerodynamic design work, many operational aspects were investigated. A manufacturing concept was developed to be applied to operational laminar wings and empennages. It was built in a large scale manufacturing demonstrator with the aerodynamic shape of a 1,5 m section of the A320 fin nose. Tolerances in shape and roughness fulfilled all requirements. The construction can easily be adapted to varying stiffness and strength requirements. Weight and manufacturing costs are comparable to common nose designs. The mock-up to be designed in ALTTA is based on this manufacturing principle. Another critical point is contamination of suction surfaces. Several tests were performed to investigate perforated titanium suction surfaces at realistic operational conditions: - a one year flight test with a suction plate in the stagnation area of the Airbus "Beluga" - a one year test of several suction plates in a ground test near the airport - a one year test of a working suction ground test installation at all weather conditions. No critical results were found. There is no long term suction degradation visible. Icing conditions and ground de-icing fluids used on airports did not pose severe problems. Some problems detected require only respection of weak design constraints.},
  subject      = {Laminare Str{\"o}mung},
  language  = {en}
}
@inproceedings{BuehrigPolaczekRoethBaumeisteretal.2006,
  author    = {B{\"u}hrig-Polaczek, Andreas and R{\"o}th, Thilo and Baumeister, E. and Nowack, N. and S{\"u}ßmann, Torsten},
  title     = {Hybride Leichtbaustrukturen in Stahlblech-Leichtmetall Verbundguss},
  year      = {2006},
  abstract  = {Stahl-Leichtmetall-Hybride mit hohen Leistungspotentialen k{\"o}nnen heute wirtschaftlich abgebildet werden und eignen sich m{\"o}glicherweise auch zum Einsatz in Fahrzeugkarosserien},
  subject      = {Karosseriebau},
  language  = {de}
}
@inproceedings{RoethTragsdorf2004,
  author    = {R{\"o}th, Thilo and Tragsdorf, Carsten},
  title     = {Innovativer Einsatz von Werkstoffen - Trends und Entwicklungen im Karosserieleichtbau},
  year      = {2004},
  abstract  = {1) In Karosseriestrukturen steht der richtige Werkstoffeinsatz st{\"a}rker den je im Spannungsfeld von Leichtbau, Kosten (St{\"u}ckzahlen) und Leistungsanforderung 2) In „klassischen" Strukturen von Modultr{\"a}gern und Klappen hat sich die Materialmischbauweise verst{\"a}rkt in den letzten Jahren durchgesetzt 3) Unter Aspekten des konzeptionellen Leichtbaus erscheint der verst{\"a}rkte Einsatz von Leichtbauwerkstoffen im Vorderwagen sowie in der Dachstruktur zielf{\"u}hrend 4) Offene Strukturprofile in Materialmischbauweise liefern f{\"u}r eine Vielzahl von Anwendungen ein interessantes und bis dato kaum genutztes Potential 5) Neue Entwicklungen bei den F{\"u}getechnologien (i.b. kontinuierliche F{\"u}geverbindungen und kombinierte Verfahren) unterst{\"u}tzen den wirtschaftlichen Karosserieleichtbau 6) Werkstoffinnovationen sowie neuartige Fertigungsverfahren machen den Konstruktionswerkstoff „Stahl" auch in der Zukunft im Karosseriebau weiterhin sehr attraktiv},
  subject      = {Karosseriebau},
  language  = {de}
}
@inproceedings{Roeth2002,
  author    = {R{\"o}th, Thilo},
  title     = {Modularisierung in der Karosserie von morgen},
  year      = {2002},
  abstract  = {1) Module werden die Fahrzeugplattform und den -aufbau in Zukunft weiterhin und in zunehmendem Maße bestimmen. 2) Neue Module und Modulschnittstellen am Fahrzeug werden {\"u}berdacht und k{\"o}nnen in der Zukunft erwartet werden. 3) Die Wertsch{\"o}pfung und der Entwicklungsumfang wird sich vom OEM zum Modullieferanten verlagern. 4) Modulvergaben werden in der Zukunft noch st{\"a}rker auf Innovation und Kostenreduktion beruhen. 5) Modularisierung des Fahrzeuges heißt ein Aufbrechen der Fahrzeugkarosserie und wird daher von der Beherrschung struktureller Aufgaben sowie der L{\"o}sung der (sichtbaren) Modul{\"u}berg{\"a}nge bestimmt sein. 6) Neben den Systemintegratoren und den Komponentenspezialisten besetzen die Modullieferanten die erste Lieferantenriege. 7) Der Modullieferant wird neben h{\"o}chster Fertigungsexpertise ein hohes Maß an (Teil-)fahrzeug-Know-How und Produktentwickler-mentalit{\"a}t bereitstellen.},
  subject      = {Karosseriebau},
  language  = {de}
}