@article{WincklerKruegerSchnitzleretal.2014, author = {Winckler, Silvia and Krueger, Rolf and Schnitzler, Thomas and Zang, Werner and Fischer, Rainer and Biselli, Manfred}, title = {A sensitive monitoring system for mammalian cell cultivation processes: a PAT approach}, series = {Bioprocess and biosystems engineering}, volume = {37}, journal = {Bioprocess and biosystems engineering}, number = {5}, publisher = {Springer}, address = {Berlin, Heidelberg}, issn = {1615-7591 (Print) 1615-7605 (Online)}, doi = {10.1007/s00449-013-1062-8}, pages = {901 -- 912}, year = {2014}, abstract = {Biopharmaceuticals such as antibodies are produced in cultivated mammalian cells, which must be monitored to comply with good manufacturing practice. We, therefore, developed a fully automated system comprising a specific exhaust gas analyzer, inline analytics and a corresponding algorithm to precisely determine the oxygen uptake rate, carbon dioxide evolution rate, carbon dioxide transfer rate, transfer quotient and respiratory quotient without interrupting the ongoing cultivation, in order to assess its reproducibility. The system was verified using chemical simulation experiments and was able to measure the respiratory activity of hybridoma cells and DG44 cells (derived from Chinese hamster ovary cells) with satisfactory results at a minimum viable cell density of ~2.0 × 10⁵ cells ml⁻¹. The system was suitable for both batch and fed-batch cultivations in bubble-aerated and membrane-aerated reactors, with and without the control of pH and dissolved oxygen.}, language = {en} } @article{BoehnischBraunMuscarelloetal.2023, author = {B{\"o}hnisch, Nils and Braun, Carsten and Muscarello, Vincenzo and Marzocca, Pier}, title = {A sensitivity study on aeroelastic instabilities of slender wings with a large propeller}, series = {AIAA SCITECH 2023 Forum}, journal = {AIAA SCITECH 2023 Forum}, publisher = {AIAA}, doi = {10.2514/6.2023-1893}, pages = {1 -- 14}, year = {2023}, abstract = {Next-generation aircraft designs often incorporate multiple large propellers attached along the wingspan. These highly flexible dynamic systems can exhibit uncommon aeroelastic instabilities, which should be carefully investigated to ensure safe operation. The interaction between the propeller and the wing is of particular importance. It is known that whirl flutter is stabilized by wing motion and wing aerodynamics. This paper investigates the effect of a propeller onto wing flutter as a function of span position and mounting stiffness between the propeller and wing. The analysis of a comparison between a tractor and pusher configuration has shown that the coupled system is more stable than the standalone wing for propeller positions near the wing tip for both configurations. The wing fluttermechanism is mostly affected by the mass of the propeller and the resulting change in eigenfrequencies of the wing. For very weak mounting stiffnesses, whirl flutter occurs, which was shown to be stabilized compared to a standalone propeller due to wing motion. On the other hand, the pusher configuration is, as to be expected, the more critical configuration due to the attached mass behind the elastic axis.}, language = {de} } @article{HarzheimMuehmelHeuermann2021, author = {Harzheim, Thomas and M{\"u}hmel, Marc and Heuermann, Holger}, title = {A SFCW harmonic radar system for maritime search and rescue using passive and active tags}, series = {International Journal of Microwave and Wireless Technologies}, volume = {13}, journal = {International Journal of Microwave and Wireless Technologies}, number = {Special Issue 7}, publisher = {Cambridge University Press}, address = {Cambridge}, doi = {10.1017/S1759078721000520}, pages = {691 -- 707}, year = {2021}, abstract = {This paper introduces a new maritime search and rescue system based on S-band illumination harmonic radar (HR). Passive and active tags have been developed and tested while attached to life jackets and a small boat. In this demonstration test carried out on the Baltic Sea, the system was able to detect and range the active tags up to a distance of 5800 m using an illumination signal transmit-power of 100 W. Special attention is given to the development, performance, and conceptual differences between passive and active tags used in the system. Guidelines for achieving a high HR dynamic range, including a system components description, are given and a comparison with other HR systems is performed. System integration with a commercial maritime X-band navigation radar is shown to demonstrate a solution for rapid search and rescue response and quick localization.}, language = {en} } @article{SchoeningBussFassbenderetal.2000, author = {Sch{\"o}ning, Michael Josef and Buß, G. and Faßbender, F. and Gl{\"u}ck, O. and Schmitt, G. and Schultze, J. W. and L{\"u}th, H.}, title = {A silicon-based microelectrode array for chemical analysis}, series = {Sensors and Actuators B. 65 (2000), H. 1-3}, journal = {Sensors and Actuators B. 65 (2000), H. 1-3}, isbn = {0925-4005}, pages = {284 -- 287}, year = {2000}, language = {en} } @article{SchoeningBussFassbenderetal.1998, author = {Sch{\"o}ning, Michael Josef and Buß, G. and Faßbender, F. and Gl{\"u}ck, O. and Schmitt, G. and Schultze, J. W. and L{\"u}th, H.}, title = {A silicon-based microelectrode array for chemical analysis}, series = {Proceedings of the Seventh International Meeting on Chemical Sensors : 27 - 30 July, 1998, Beijing, P. R. China / ed. Zhi-Gang Zhou}, journal = {Proceedings of the Seventh International Meeting on Chemical Sensors : 27 - 30 July, 1998, Beijing, P. R. China / ed. Zhi-Gang Zhou}, publisher = {Elsevier}, address = {Amsterdam [u.a.]}, pages = {100 -- 102}, year = {1998}, language = {en} } @article{BaeckerPouyeshmanSchnitzleretal.2011, author = {B{\"a}cker, Matthias and Pouyeshman, S. and Schnitzler, Thomas and Poghossian, Arshak and Wagner, Patrick and Biselli, Manfred and Sch{\"o}ning, Michael Josef}, title = {A silicon-based multi-sensor chip for monitoring of fermentation processes}, series = {Physica status solidi (a) : applications and material science. 208 (2011), H. 6}, journal = {Physica status solidi (a) : applications and material science. 208 (2011), H. 6}, publisher = {Wiley}, address = {Weinheim}, isbn = {1862-6319}, pages = {1364 -- 1369}, year = {2011}, language = {en} } @article{SchoeningWeidenbrueckThustetal.1997, author = {Sch{\"o}ning, Michael Josef and Weidenbr{\"u}ck, B. and Thust, M. and Kordos, P. and L{\"u}th, H.}, title = {A silicon-based sensor array with capacitive EIS structures}, series = {Proceedings of the 11th European Conference on Solid-State Transducers / Eurosensors XI, September 21 - 24, 1997, Warsaw, Poland. [Organised by] Warsaw University of Technology. Vol 2.}, journal = {Proceedings of the 11th European Conference on Solid-State Transducers / Eurosensors XI, September 21 - 24, 1997, Warsaw, Poland. [Organised by] Warsaw University of Technology. Vol 2.}, publisher = {Sensor Lab Sp.}, address = {Warsaw}, isbn = {83-908335-0-6}, pages = {871 -- 874}, year = {1997}, language = {en} } @article{PieperKlein2011, author = {Pieper, Martin and Klein, Peter}, title = {A simple and accurate numerical network flow model for bionic micro heat exchangers}, series = {Heat mass transfer}, volume = {47}, journal = {Heat mass transfer}, number = {5}, publisher = {Springer}, address = {Berlin}, isbn = {0947-7411}, pages = {491 -- 503}, year = {2011}, language = {en} } @article{PrumeBooijVogletal.2007, author = {Prume, Klaus and Booij, W. E. and Vogl, A. H. and Wang, D. T.}, title = {A simple and powerful analytical model for MEMS piezoelectric multimorphs / Booij, W. E. ; Vogl, A. H. ; Wang, D. T. ; Tyholdt, F. ; Ostbo, N. P. ; Raeder, H. ; Prume, K.}, series = {Journal of Electroceramics. 19 (2007), H. 4}, journal = {Journal of Electroceramics. 19 (2007), H. 4}, isbn = {1385-3449}, pages = {387 -- 393}, year = {2007}, language = {en} } @article{FerreinBeckLakemeyer2007, author = {Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard}, title = {A Simulation Environment for Middle-Size Robots with Multi-level Abstraction / Beck, Daniel ; Ferrein, Alexander ; Lakemeyer, Gerhard}, series = {RoboCup 2007: Robot Soccer World Cup XI}, journal = {RoboCup 2007: Robot Soccer World Cup XI}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-540-68846-4}, pages = {136 -- 147}, year = {2007}, language = {en} } @article{DachwaldBallUlamecetal.2009, author = {Dachwald, Bernd and Ball, Andrew J. and Ulamec, Stephan and Price, Michael E.}, title = {A small mission for in situ exploration of a primitive binary near-Earth asteroid / Ball, Andrew J. ; Ulamec, Stephan ; Dachwald, Bernd ; Price, Michael E. ; [u.a.]}, series = {Advances in Space Research. 43 (2009), H. 2}, journal = {Advances in Space Research. 43 (2009), H. 2}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {0273-1177}, pages = {317 -- 324}, year = {2009}, language = {en} } @article{HillenAlperSelverFischeretal.2007, author = {Hillen, Walter and Alper Selver, M. and Fischer, Felix and Kuntalp, Mehmet}, title = {A software tool for interactive generation, representation, and systematical storage of transfer functions for 3D medical images / Alper Selver, M. ; Fischer, Felix ; Kuntalp, Mehmet ; Hillen, Walter}, series = {Computer Methods and Programs in Biomedicine. 86 (2007), H. 3}, journal = {Computer Methods and Programs in Biomedicine. 86 (2007), H. 3}, publisher = {-}, isbn = {0169-2607}, pages = {270 -- 280}, year = {2007}, language = {en} } @article{Weigand1991, author = {Weigand, Christoph}, title = {A Solution to the Scheduling Problem Taking into Account Quality}, series = {Operations research '91 : extended abstracts of the 16th Symposium on Operations Research held at the University of Trier at September 9 - 11, 1991 / [GM{\"O}OR]. Peter Gritzmann ... (eds.)}, journal = {Operations research '91 : extended abstracts of the 16th Symposium on Operations Research held at the University of Trier at September 9 - 11, 1991 / [GM{\"O}OR]. Peter Gritzmann ... (eds.)}, publisher = {Physica-Verl.}, address = {Heidelberg}, isbn = {3790806080}, pages = {373 -- 375}, year = {1991}, language = {en} } @article{MonakhovaDiehl2021, author = {Monakhova, Yulia and Diehl, Bernd W. K.}, title = {A step towards optimization of the qNMR workflow: proficiency testing exercise at an GxP-accredited laboratory}, series = {Applied Magnetic Resonance}, volume = {52}, journal = {Applied Magnetic Resonance}, publisher = {Springer Nature}, address = {Wien}, issn = {1613-7507}, doi = {10.1007/s00723-021-01324-3}, pages = {581 -- 593}, year = {2021}, abstract = {Quantitative nuclear magnetic resonance (qNMR) is considered as a powerful tool for multicomponent mixture analysis as well as for the purity determination of single compounds. Special attention is currently paid to the training of operators and study directors involved in qNMR testing. To assure that only qualified personnel are used for sample preparation at our GxP-accredited laboratory, weighing test was proposed. Sixteen participants performed six-fold weighing of the binary mixture of dibutylated hydroxytoluene (BHT) and 1,2,4,5-tetrachloro-3-nitrobenzene (TCNB). To evaluate the quality of data analysis, all spectra were evaluated manually by a qNMR expert and using in-house developed automated routine. The results revealed that mean values are comparable and both evaluation approaches are free of systematic error. However, automated evaluation resulted in an approximately 20\% increase in precision. The same findings were revealed for qNMR analysis of 32 compounds used in pharmaceutical industry. Weighing test by six-fold determination in binary mixtures and automated qNMR methodology can be recommended as efficient tools for evaluating staff proficiency. The automated qNMR method significantly increases throughput and precision of qNMR for routine measurements and extends application scope of qNMR.}, language = {en} } @article{ReisselBitschStamm2000, author = {Reißel, Martin and Bitsch, G. and Stamm, H.}, title = {A Stern Door Slam Fatigue Calculation / Bitsch, G. ; Reißel, M. ; Stamm, H.}, series = {Proceedings of the 18. CAD-FEM Users Meeting}, journal = {Proceedings of the 18. CAD-FEM Users Meeting}, year = {2000}, language = {en} } @article{FassbenderManeth1996, author = {Faßbender, Heinz and Maneth, Sebastian}, title = {A strict border for the decidability of e-unification for recursive functions / Faßbender, Heinz ; Maneth, Sebastian}, series = {Algebraic and logic programming : proceedings / 5th International Conference, ALP '96, Aachen, Germany, September 25 - 27, 1996. Michael Hanus ... (ed.)}, journal = {Algebraic and logic programming : proceedings / 5th International Conference, ALP '96, Aachen, Germany, September 25 - 27, 1996. Michael Hanus ... (ed.)}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-61735-3}, pages = {194 -- 208}, year = {1996}, language = {en} } @article{FassbenderManeth1998, author = {Faßbender, Heinz and Maneth, Sebastian}, title = {A strict border for the decidability of e-unification for recursive functions / Faßbender, Heinz ; Maneth, Sebastian}, series = {Journal of functional and logic programming. 1998 (1998), H. 4}, journal = {Journal of functional and logic programming. 1998 (1998), H. 4}, isbn = {1080-5230}, year = {1998}, language = {en} } @article{Heuermann2004, author = {Heuermann, Holger}, title = {A Synthesis Technique for Mono- and Mixed-Mode Symmetrical Filter}, series = {Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association . Vol. 1}, journal = {Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association . Vol. 1}, publisher = {Horizon House Publ}, address = {London}, isbn = {1-580-53992-0}, pages = {309 -- 312}, year = {2004}, language = {en} } @article{WissenbachSixBongaertsetal.1995, author = {Wissenbach, U. and Six, S. and Bongaerts, Johannes and Ternes, D. and Steinwachs, S. and Unden, G.}, title = {A third periplasmic transport system for l-arginine in Escherichia coli: molecular characterization of the artPIQMJ genes, arginine binding and transport}, series = {Molecular microbiology}, volume = {Vol. 17}, journal = {Molecular microbiology}, number = {Iss. 4}, issn = {1365-2958 (E-Journal); 0950-382x (Print)}, pages = {675 -- 686}, year = {1995}, language = {en} } @article{GebhardtJarkeJacobs1997, author = {Gebhardt, Michael and Jarke, Matthias and Jacobs, Stephan}, title = {A Toolkit for Negotiation Support Interfaces to Multidimensional Data}, series = {SIGMOD 1997 : proceedings ACM SIGMOD International Conference on Management of Data, May 13 - 15, 1997, Tucson, Arizona, USA / ed. by Joan M. Peckman}, journal = {SIGMOD 1997 : proceedings ACM SIGMOD International Conference on Management of Data, May 13 - 15, 1997, Tucson, Arizona, USA / ed. by Joan M. Peckman}, publisher = {ACM Press}, address = {New York, NY}, isbn = {0897919114}, pages = {XIV, 586 S : Ill., graph. Darst.}, year = {1997}, language = {en} } @article{Jochim2004, author = {Jochim, Haldor E.}, title = {A traffic resistance model of long-distance travel}, series = {Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of}, journal = {Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of}, publisher = {FOVUS}, address = {Stuttgart}, isbn = {3-89301-180-3}, pages = {X, 84 S. : graph. Darst. + 1 CD-ROM}, year = {2004}, language = {en} } @article{KraffBitzBreyeretal.2011, author = {Kraff, Oliver and Bitz, Andreas and Breyer, Tobias and Kruszona, Stefan and Maderwald, Stefan and Brote, Irina and Gizewski, Elke R. and Ladd, Mark E. and Quick, Harald H.}, title = {A transmit/receive radiofrequency array for imaging the carotid arteries at 7 Tesla: coil design and first in vivo results}, series = {Investigative Radiology}, volume = {46}, journal = {Investigative Radiology}, number = {4}, publisher = {Wolters Kluwer}, address = {K{\"o}ln}, issn = {1536-0210}, doi = {10.1097/RLI.0b013e318206cee4}, pages = {246 -- 254}, year = {2011}, abstract = {Objective: To develop a transmit/receive radiofrequency (RF) array for magnetic resonance imaging (MRI) of the carotid arteries at 7 T. The prototype is characterized in numerical simulations and bench measurements, and the feasibility of plaque imaging at 7 T is demonstrated in first in vivo images. Materials and Methods: The RF phased array coil consists of 8 surface loop coils. To allow imaging of both sides of the neck, the RF array is divided into 2 coil clusters, each with 4 overlapping loop elements. For safety validation, numerical computations of the RF field distribution and the corresponding specific absorption rate were performed on the basis of a heterogeneous human body model. To validate the coil model, maps of the transmit B1+ field were compared between simulation and measurement. In vivo images of a healthy volunteer and a patient (ulcerating plaque and a 50\% stenosis of the right internal carotid artery) were acquired using a 3-dimensional FLASH sequence with a high isotropic spatial resolution of 0.54 mm as well as using pulse-triggered proton density (PD)/T2-weighted turbo spin echo sequences. Results: Measurements of the S-parameters yielded a reflection and isolation of the coil elements of better than -18 and -13 dB, respectively. Measurements of the g-factor indicated good image quality for parallel imaging acceleration factors up to 2.4. A similar distribution and a very good match of the absolute values were found between the measured and simulated B1+ transmit RF field for the validation of the coil model. In vivo images revealed good signal excitation of both sides of the neck and a high vessel-to-background image contrast for the noncontrast-enhanced 3-dimensional FLASH sequence. Imaging at 7 T could depict the extent of stenosis, and revealed the disruption and ulcer of the plaque. Conclusions: This study demonstrates that 2 four-channel transmit/receive RF arrays for each side of the neck is a suitable concept for in vivo MRI of the carotid arteries at 7 Tesla. Further studies are needed to explore and exploit the full potential of 7 T high-field MRI for carotid atherosclerotic plaque imaging.}, language = {en} } @article{SelmerThamerCirpusetal.2003, author = {Selmer, Thorsten and Thamer, Wiebke and Cirpus, Irina and Hans, Marcus}, title = {A two [4Fe-4S]-cluster-containing ferredoxin as an alternative electron donor for 2-hydroxyglutaryl-CoA dehydratase from Acidaminococcus fermentans / Thamer, Wiebke ; Cirpus, Irina ; Hans, Marcus ; Pierik, Antonio, J. ; Selmer, Thorsten ; Bill, Eckhard ;}, series = {Archives of Microbiology. 179 (2003), H. 3}, journal = {Archives of Microbiology. 179 (2003), H. 3}, isbn = {1432-072X}, pages = {197 -- 204}, year = {2003}, language = {en} } @article{KuehnHaugnerStaatetal.2004, author = {K{\"u}hn, Raoul-Roman and Haugner, Werner and Staat, Manfred and Sponagel, Stefan}, title = {A Two Phase Mixture Model based on Bone Observation}, year = {2004}, abstract = {An optimization method is developed to describe the mechanical behaviour of the human cancellous bone. The method is based on a mixture theory. A careful observation of the behaviour of the bone material leads to the hypothesis that the bone density is controlled by the principal stress trajectories (Wolff's law). The basic idea of the developed method is the coupling of a scalar value via an eigenvalue problem to the principal stress trajectories. On the one hand this theory will permit a prediction of the reaction of the biological bone structure after the implantation of a prosthesis, on the other hand it may be useful in engineering optimization problems. An analytical example shows its efficiency.}, subject = {Knochen}, language = {en} } @article{HardtKoehlerMuelleretal.1980, author = {Hardt, Arno and K{\"o}hler, M. and M{\"u}ller, K. D. and Stoff, H.}, title = {A two-dimensional position sensitive charged-particle detector for the magnetic spectrograph "BIG KARL" of the J{\"u}lich Cyclotron "JULIC". M. K{\"o}hler, K. D. M{\"u}ller, H. Stoff, M. Teske, G. P. A. Berg, A. Hardt, S. Martin, C. Mayer-B{\"o}ricke , J. Meißburger}, series = {Nuclear Instruments and Methods. 75 (1980), H. 2-3}, journal = {Nuclear Instruments and Methods. 75 (1980), H. 2-3}, isbn = {0029-554X}, pages = {357 -- 362}, year = {1980}, language = {en} } @article{FassbenderVogler1994, author = {Faßbender, Heinz and Vogler, Heiko}, title = {A universal unification algorithm based on unification-driven leftmost outermost narrowing}, series = {Acta Cybernetica. 11 (1994), H. 3}, journal = {Acta Cybernetica. 11 (1994), H. 3}, isbn = {0324-721x}, pages = {139 -- 167}, year = {1994}, language = {en} } @article{Fassbender1995, author = {Faßbender, Heinz}, title = {A verified implementation of narrowing}, series = {Programming languages: implementations, logics and programs : proceedings / 7th International Symposium, PLILP '95, Utrecht, The Netherlands, September 20 - 22, 1995. Manuel Hermenegildo ... (ed.)}, journal = {Programming languages: implementations, logics and programs : proceedings / 7th International Symposium, PLILP '95, Utrecht, The Netherlands, September 20 - 22, 1995. Manuel Hermenegildo ... (ed.)}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-60359-X}, pages = {63 -- 80}, year = {1995}, language = {en} } @article{StockMalindretosIndlekoferetal.2001, author = {Stock, J. and Malindretos, J. and Indlekofer, K.M. and P{\"o}ttgens, Michael and F{\"o}rster, Arnold and L{\"u}th, Hans}, title = {A Vertical Resonant Tunneling Transistor for Application in Digital Logic Circuits}, series = {IEEE Transactions on Electron Devices (T-ED). 48 (2001), H. 6}, journal = {IEEE Transactions on Electron Devices (T-ED). 48 (2001), H. 6}, isbn = {0018-9383}, pages = {1028 -- 1032}, year = {2001}, language = {en} } @article{BergmannDemuthSander2011, author = {Bergmann, Sandra and Demuth, Bastian and Sander, Volker}, title = {A Web Framework for Workflow Submission and Monitoring via UNICORE 6 based on Distributable Scientific Workflow Templates}, series = {UNICORE Summit 2011 : proceedings, 7-8 July 2011, Torun, Poland / Mathilde Romberg ... (Eds.)}, journal = {UNICORE Summit 2011 : proceedings, 7-8 July 2011, Torun, Poland / Mathilde Romberg ... (Eds.)}, publisher = {Forschungszentrum J{\"u}lich}, address = {J{\"u}lich}, isbn = {9783893367504}, pages = {45 -- 50}, year = {2011}, language = {en} } @article{SimonisKringsLuethetal.2001, author = {Simonis, A. and Krings, T. and L{\"u}th, H. and Wang, J. and Sch{\"o}ning, Michael Josef}, title = {A „hybrid" thin-film pH sensor with integrated thick-film reference}, series = {Sensors. 1 (2001), H. 6}, journal = {Sensors. 1 (2001), H. 6}, isbn = {1424-8220}, pages = {183 -- 192}, year = {2001}, language = {en} } @article{GollandEngling2014, author = {Golland, Alexander and Engling, Christoph}, title = {a-i3/BSI Symposium 2014: Sicherheit von Daten und Identit{\"a}ten angesichts NSA und Big Data}, series = {DSB Datenschutz-Berater}, volume = {38}, journal = {DSB Datenschutz-Berater}, number = {7-8}, publisher = {dfv Mediengruppe}, address = {Frankfurt a.M.}, isbn = {0170-7256}, pages = {165 -- 166}, year = {2014}, language = {de} } @article{PawelkeSchmittMeissen1990, author = {Pawelke, Siegfried and Schmitt, W. and Meissen, Th.}, title = {Aachen 3D finger. 3D digitizer for application in dentistry / Schmitt, W. ; Pawelke, S. ; Meissen, Th.}, series = {Biomedizinische Technik. 35 (1990), H. 4}, journal = {Biomedizinische Technik. 35 (1990), H. 4}, isbn = {0013-5585}, pages = {69 -- 71}, year = {1990}, language = {en} } @article{Naujokat2002, author = {Naujokat, Anke}, title = {Aachen: Colourdome}, series = {Bauwelt. 93 (2002), H. 37}, journal = {Bauwelt. 93 (2002), H. 37}, isbn = {0931-6590}, pages = {2}, year = {2002}, language = {en} } @article{Naujokat2005, author = {Naujokat, Anke}, title = {Aachen: Deimel und Wittmar : jene zwanziger Jahre}, series = {Bauwelt. 96 (2005), H. 7}, journal = {Bauwelt. 96 (2005), H. 7}, isbn = {0931-6590}, pages = {6 -- 7}, year = {2005}, language = {de} } @article{Naujokat2006, author = {Naujokat, Anke}, title = {Aachen: Europ{\"a}isches Kulturzentrum "Bauhaus Europa"}, series = {Bauwelt. 97 (2006), H. 6}, journal = {Bauwelt. 97 (2006), H. 6}, isbn = {0931-6590}, pages = {6}, year = {2006}, language = {de} } @article{Naujokat2005, author = {Naujokat, Anke}, title = {Aachen: Grau Blau Gr{\"u}n : der Emscher Landschaftspark}, series = {Bauwelt. 96 (2005), H. 29}, journal = {Bauwelt. 96 (2005), H. 29}, isbn = {0931-6590}, pages = {3}, year = {2005}, language = {de} } @article{Naujokat2001, author = {Naujokat, Anke}, title = {Aachen: Symposium - Maulnes und der Manierismus in Frankreich}, series = {Bauwelt. 92 (2001), H. 22}, journal = {Bauwelt. 92 (2001), H. 22}, isbn = {0931-6590}, pages = {4}, year = {2001}, language = {de} } @article{Alt1974, author = {Alt, Helmut}, title = {Ab 1975 Uranerz aus Rabbit-Lake}, series = {Energiewirtschaftliche Tagesfragen}, volume = {24}, journal = {Energiewirtschaftliche Tagesfragen}, number = {1/2}, publisher = {VDE-Verlag}, address = {Berlin}, issn = {0720-6240}, pages = {34}, year = {1974}, language = {de} } @article{Mang2002, author = {Mang, Thomas}, title = {Abdichtmaterialien gegen dr{\"u}ckendes Wasser}, series = {Bauchemie von der Forschung bis zur Praxis : 3. Tagung Bauchemie in W{\"u}rzburg ; 27./28. September 2001 in W{\"u}rzburg / GDCh-Fachgruppe Bauchemie ; [Red.: W. Hiller ...]}, journal = {Bauchemie von der Forschung bis zur Praxis : 3. Tagung Bauchemie in W{\"u}rzburg ; 27./28. September 2001 in W{\"u}rzburg / GDCh-Fachgruppe Bauchemie ; [Red.: W. Hiller ...]}, publisher = {GDCh}, address = {Frankfurt am Main}, isbn = {3-936028-04-4}, pages = {65}, year = {2002}, language = {de} } @article{MangHaulena1999, author = {Mang, Thomas and Haulena, Friedhelm}, title = {Abdichtmaterialien gegen dr{\"u}ckendes Wasser und Diesel mit verbesserter Umweltvertr{\"a}glichkeit}, series = {Internationale Zeitschrift f{\"u}r Bauinstandsetzen und Baudenkmalpflege = International journal for restoration of buildings and monuments. 5 (1999), H. 1}, journal = {Internationale Zeitschrift f{\"u}r Bauinstandsetzen und Baudenkmalpflege = International journal for restoration of buildings and monuments. 5 (1999), H. 1}, isbn = {0947-4498}, pages = {57}, year = {1999}, language = {de} } @article{KetternFrechen1995, author = {Kettern, J{\"u}rgen and Frechen, F. B.}, title = {Abfallentsorgung und Geruchsemissionen. Tl.1. Grundlagen und Problematik / Frechen, F. B.; Kettern, J. T.}, series = {Entsorgungspraxis. 13 (1995), H. 1/2}, journal = {Entsorgungspraxis. 13 (1995), H. 1/2}, isbn = {0724-6870}, pages = {58 -- 62}, year = {1995}, language = {de} } @article{KetternFrechen1995, author = {Kettern, J{\"u}rgen and Frechen, F. B.}, title = {Abfallentsorgung und Geruchsemissionen. Tl.2. Minderungsmaßnahmen / Frechen, F. B.; Kettern, J. T.}, series = {Entsorgungspraxis. 13 (1995), H. 1/2}, journal = {Entsorgungspraxis. 13 (1995), H. 1/2}, isbn = {0724-6870}, pages = {40 -- 43}, year = {1995}, language = {de} } @article{Biener2004, author = {Biener, Ernst}, title = {Abfallwirtschaft}, series = {Bautechnische Zahlentafeln, m. CD-ROM / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... 31., vollst. {\"u}berarb. und aktualisierte Aufl.}, journal = {Bautechnische Zahlentafeln, m. CD-ROM / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... 31., vollst. {\"u}berarb. und aktualisierte Aufl.}, publisher = {Teubner [u.a.]}, address = {Stuttgart [u.a.]}, isbn = {3-519-55002-4}, pages = {1259 -- 1292}, year = {2004}, language = {de} } @article{Biener2002, author = {Biener, Ernst}, title = {Abfallwirtschaft}, series = {Bautechnische Zahlentafeln / Wendehorst. Hrsg.: Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... - 30., akt. u. erw. Aufl.}, journal = {Bautechnische Zahlentafeln / Wendehorst. Hrsg.: Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... - 30., akt. u. erw. Aufl.}, publisher = {Teubner}, address = {Stuttgart}, isbn = {3-519-45002-X}, pages = {1155 -- 1187}, year = {2002}, language = {de} } @article{Biener2000, author = {Biener, Ernst}, title = {Abfallwirtschaft}, series = {Bautechnische Zahlentafeln : mit 225 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 29., neubearb. Aufl.}, journal = {Bautechnische Zahlentafeln : mit 225 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 29., neubearb. Aufl.}, publisher = {Teubner [u.a.]}, address = {Stuttgart [u.a.]}, isbn = {3-519-35002-5}, pages = {1273 -- 1303}, year = {2000}, language = {de} } @article{Biener1996, author = {Biener, Ernst}, title = {Abfallwirtschaft}, series = {Bautechnische Zahlentafeln : mit 245 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 27., neubearb. und erw. Aufl.}, journal = {Bautechnische Zahlentafeln : mit 245 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 27., neubearb. und erw. Aufl.}, publisher = {Teubner [u.a.]}, address = {Stuttgart [u.a.]}, isbn = {3-519-15002-6}, pages = {1271 -- 1298}, year = {1996}, language = {de} } @article{Biener1994, author = {Biener, Ernst}, title = {Abfallwirtschaft}, series = {Bautechnische Zahlentafeln : mit 194 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 26., neubearb. und erw. Aufl.}, journal = {Bautechnische Zahlentafeln : mit 194 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 26., neubearb. und erw. Aufl.}, publisher = {Teubner [u.a.]}, address = {Stuttgart}, isbn = {3-519-05002-1}, pages = {1089 -- 1102}, year = {1994}, language = {de} } @article{Biener2007, author = {Biener, Ernst}, title = {Abfallwirtschaft}, series = {Bautechnische Zahlentafeln / Wendehorst, Reinhard ; Wetzell, Otto W. [Hrsg.] 32., vollst. aktualisierte Aufl.}, journal = {Bautechnische Zahlentafeln / Wendehorst, Reinhard ; Wetzell, Otto W. [Hrsg.] 32., vollst. aktualisierte Aufl.}, publisher = {Teubner}, address = {Stuttgart}, isbn = {978-3-8351-0055-8}, pages = {1291 -- 1330}, year = {2007}, language = {de} } @article{Biener2007, author = {Biener, Ernst}, title = {Abfallwirtschaft}, series = {Wendehorst Beispiele aus der Baupraxis / Wetzell, Otto W. ; Baumgartner, Herwig ; Wendehorst, Reinhard [Hrsg.].}, journal = {Wendehorst Beispiele aus der Baupraxis / Wetzell, Otto W. ; Baumgartner, Herwig ; Wendehorst, Reinhard [Hrsg.].}, publisher = {Teubner}, address = {Wiesbaden}, isbn = {978-3-8351-0069-5}, pages = {433 -- 463}, year = {2007}, language = {de} } @article{PawelkeButzer1967, author = {Pawelke, Siegfried and Butzer, Paul L.}, title = {Ableitungen von trigonometrischen Approximationsprozessen}, series = {Acta scientiarum mathematicarum / Institutum Bolyaianum Universitatis Szegediensis}, volume = {28}, journal = {Acta scientiarum mathematicarum / Institutum Bolyaianum Universitatis Szegediensis}, number = {1-2}, publisher = {n.a.}, address = {Szeged}, isbn = {0001-6969}, pages = {173 -- 183}, year = {1967}, language = {de} } @article{SchoeningKloock2007, author = {Sch{\"o}ning, Michael Josef and Kloock, Joachim P.}, title = {About 20 years of silicon-based thin-film sensors with chalcogenide glass materials for heavy metal analysis: Technological aspects of fabrication and miniaturization}, series = {Electroanalysis. 19 (2007), H. 19-20}, journal = {Electroanalysis. 19 (2007), H. 19-20}, isbn = {1040-0397}, pages = {2029 -- 2038}, year = {2007}, language = {en} } @article{BoehnischBraunMuscarelloetal.2024, author = {B{\"o}hnisch, Nils and Braun, Carsten and Muscarello, Vincenzo and Marzocca, Pier}, title = {About the wing and whirl flutter of a slender wing-propeller system}, series = {Journal of Aircraft}, journal = {Journal of Aircraft}, publisher = {American Institute of Aeronautics and Astronautics}, issn = {1533-3868}, doi = {10.2514/1.C037542}, pages = {1 -- 14}, year = {2024}, abstract = {Next-generation aircraft designs often incorporate multiple large propellers attached along the wingspan (distributed electric propulsion), leading to highly flexible dynamic systems that can exhibit aeroelastic instabilities. This paper introduces a validated methodology to investigate the aeroelastic instabilities of wing-propeller systems and to understand the dynamic mechanism leading to wing and whirl flutter and transition from one to the other. Factors such as nacelle positions along the wing span and chord and its propulsion system mounting stiffness are considered. Additionally, preliminary design guidelines are proposed for flutter-free wing-propeller systems applicable to novel aircraft designs. The study demonstrates how the critical speed of the wing-propeller systems is influenced by the mounting stiffness and propeller position. Weak mounting stiffnesses result in whirl flutter, while hard mounting stiffnesses lead to wing flutter. For the latter, the position of the propeller along the wing span may change the wing mode shapes and thus the flutter mechanism. Propeller positions closer to the wing tip enhance stability, but pusher configurations are more critical due to the mass distribution behind the elastic axis.}, language = {en} } @article{FuchsRitz2011, author = {Fuchs, Britta and Ritz, Thomas}, title = {Absatzkan{\"a}le kaum verkn{\"u}pft}, series = {IT-Mittelstand : IT-Business im Mittelstand}, volume = {2011}, journal = {IT-Mittelstand : IT-Business im Mittelstand}, number = {9}, publisher = {Medienhaus-Verlag}, address = {Bergisch-Gladbach}, pages = {16}, year = {2011}, language = {de} } @article{HagemannGeittnerSchnittkeretal.1989, author = {Hagemann, Hans-J{\"u}rgen and Geittner, P. and Schnittker, W. and Warnier, J.}, title = {Abscheidegeschwindigkeiten und Prozeßausbeuten im PCVD-Verfahren. Geittner, P.; Hagemann, H. J.; Schnittker, W.; Warnier, J.; Weling, F.; Wilson, H.}, series = {Philips - Unsere Forschung in Deutschland / Hrsg.: Philips Forschungslaboratorium GmbH Aachen und Hamburg. 4 (1989)}, journal = {Philips - Unsere Forschung in Deutschland / Hrsg.: Philips Forschungslaboratorium GmbH Aachen und Hamburg. 4 (1989)}, pages = {140 -- 143}, year = {1989}, language = {de} } @article{Olbertz2015, author = {Olbertz, Klaus}, title = {Abschlagsfreie Rente mit 63 - Die wichtigsten Fragestellungen und L{\"o}sungen f{\"u}r die Praxis}, series = {NWB - Steuer- und Wirtschaftsrecht}, journal = {NWB - Steuer- und Wirtschaftsrecht}, number = {15}, publisher = {NWB Verlag}, address = {Herne}, issn = {1860-9449}, pages = {1263 -- 1270}, year = {2015}, language = {de} } @article{SchneiderSchneider2006, author = {Schneider, Bettina and Schneider, Wilhelm}, title = {Abschlussarbeiten FAQ / FGA}, series = {Wirtschaftswissenschaftliches Studium : Wist ; Zeitschrift f{\"u}r Ausbildung und Hochschulkontakt. 35 (2006), H. 9}, journal = {Wirtschaftswissenschaftliches Studium : Wist ; Zeitschrift f{\"u}r Ausbildung und Hochschulkontakt. 35 (2006), H. 9}, isbn = {0340-1650}, pages = {537 -- 539}, year = {2006}, language = {de} } @article{Siepmann1986, author = {Siepmann, Thomas}, title = {Abschlußbericht zum Vorhaben Nr. 22/IV}, series = {Forschungsvereinigung Antriebstechnik: Forschungsreport}, journal = {Forschungsvereinigung Antriebstechnik: Forschungsreport}, publisher = {FVA}, address = {Frankfurt/M.}, year = {1986}, language = {de} } @article{PaschmannSpanka1994, author = {Paschmann, Hans and Spanka, Gerhard}, title = {Absch{\"a}tzung des Eindringverhaltens organischer Fl{\"u}ssigkeiten in Beton anhand von Stoffkennwerten}, series = {Beton. 44 (1994), H. 12}, journal = {Beton. 44 (1994), H. 12}, isbn = {0005-9846}, pages = {738 -- 743}, year = {1994}, language = {de} } @article{BreitbachDavidLohnert1984, author = {Breitbach, Gerd and David, P.-H. and Lohnert, G.-H.}, title = {Absch{\"a}tzung des langfristigen Lufteintrags nach einem Druckentlastungsst{\"o}rfall des HTR-Modul}, series = {Jahrestagung Kerntechnik '84 : Alte Oper, Frankfurt, 22. - 24. Mai 1984 ; Tagungsbericht / Kerntechnische Gesellschaft}, journal = {Jahrestagung Kerntechnik '84 : Alte Oper, Frankfurt, 22. - 24. Mai 1984 ; Tagungsbericht / Kerntechnische Gesellschaft}, publisher = {Deutsches Atomforum}, address = {Bonn}, isbn = {0173-0924}, pages = {287 -- 290}, year = {1984}, language = {de} } @article{HoylerPetkovAndrejtscheff1988, author = {Hoyler, Friedrich and Petkov, P. and Andrejtscheff, W.}, title = {Absolute E0, E1 and E2 transition rates in even-even nuclei obtained in thermal neutron capture / P. Petkov ; W. Andrejtscheff ... F. Hoyler ...}, series = {Journal of Physics G. 14 (1988), H. S}, journal = {Journal of Physics G. 14 (1988), H. S}, isbn = {0305-4616}, pages = {S97 -- S102}, year = {1988}, language = {en} } @article{MangHodeniusSchmitzRodeetal.2009, author = {Mang, Thomas and Hodenius, M. A. J. and Schmitz-Rode, T. and Baumann, M.}, title = {Absorption of 10-hydroxycamptothecin into the coat of magnetoliposomes / Hodenius, M. A. J. ; Schmitz-Rode, T. ; Baumann, M. ; Ivoanova, G. ; Wong, J. E. ; Mang, T. ; Haulena, F. ; Soenen, S. J. H. ; De Cuyper, M.}, series = {Colloids and Surfaces A: Physicochemical and Engineering Aspects. 343 (2009), H. 1-3}, journal = {Colloids and Surfaces A: Physicochemical and Engineering Aspects. 343 (2009), H. 1-3}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {0927-7757}, pages = {20 -- 23}, year = {2009}, language = {en} } @article{SchifferFerreinLakemeyer2015, author = {Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard}, title = {Abstracting Away Low-Level Details in Service Robotics with Fuzzy Fluents}, series = {Model-Driven Knowledge Engineering for Improved Software Modularity in Robotics and Automation. Workshop at European Robotics Forum 2015 Vienna, Austria, March 11-13, 2015.}, journal = {Model-Driven Knowledge Engineering for Improved Software Modularity in Robotics and Automation. Workshop at European Robotics Forum 2015 Vienna, Austria, March 11-13, 2015.}, pages = {1 -- 4}, year = {2015}, language = {en} } @article{MuellerBillmaierMueller2013, author = {M{\"u}ller, Karsten and Billmaier, Karl and M{\"u}ller, Ernst A.}, title = {Abwasserw{\"a}rmenutzung}, series = {Wasserwirtschaft, Wassertechnik : wwt. 2013, H. 5}, journal = {Wasserwirtschaft, Wassertechnik : wwt. 2013, H. 5}, publisher = {Deutscher Fachverlag}, address = {Frankfurt am Main}, issn = {1438-5716}, pages = {24 -- 26}, year = {2013}, language = {de} } @article{MertensKlevenhusenJakob1987, author = {Mertens, Josef and Klevenhusen, K. D. and Jakob, H.}, title = {Accurate Transonic Wave Drag Prediction Using Simple Physical Models}, series = {AIAA-Journal. 25 (1987), H. 6}, journal = {AIAA-Journal. 25 (1987), H. 6}, isbn = {0001-1452}, pages = {799 -- 805}, year = {1987}, language = {en} } @article{SelmerHetzelBrocketal.2003, author = {Selmer, Thorsten and Hetzel, Marc and Brock, Matthias and Pierik, Antonio J.}, title = {Acryloyl-CoA reductase from Clostridium propionicum. An enzyme complex of propionyl-CoA dehydrogenase and electron-transferring flavoprotein / Hetzel, Marc ; Brock, Matthias ; Selmer, Thorsten, Pierik, Antonio J. ; Golding, Bernard T. ; Buckel, Wolfgang}, series = {European Journal of Biochemistry. 270 (2003), H. 5}, journal = {European Journal of Biochemistry. 270 (2003), H. 5}, isbn = {0014-2956}, pages = {902 -- 910}, year = {2003}, language = {en} } @article{FerreinDyllaLakemeyer2002, author = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard}, title = {Acting and Deliberating using Golog in Robotic Soccer - A Hybrid Architecture / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard}, series = {Proc. 3rd International Cognitive Robotics Workshop (CogRob 2002)}, journal = {Proc. 3rd International Cognitive Robotics Workshop (CogRob 2002)}, pages = {1 -- 7}, year = {2002}, language = {en} } @article{FerreinSteinbauerVassos2012, author = {Ferrein, Alexander and Steinbauer, Gerald and Vassos, Stavros}, title = {Action-Based Imperative Programming with YAGI}, pages = {24 -- 31}, year = {2012}, abstract = {Many tasks for autonomous agents or robots are best described by a specification of the environment and a specification of the available actions the agent or robot can perform. Combining such a specification with the possibility to imperatively program a robot or agent is what we call the actionbased imperative programming. One of the most successful such approaches is Golog. In this paper, we draft a proposal for a new robot programming language YAGI, which is based on the action-based imperative programming paradigm. Our goal is to design a small, portable stand-alone YAGI interpreter. We combine the benefits of a principled domain specification with a clean, small and simple programming language, which does not exploit any side-effects from the implementation language. We discuss general requirements of action-based programming languages and outline YAGI, our action-based language approach which particularly aims at embeddability.}, language = {en} } @article{PohlSiegertMeschetal.1998, author = {Pohl, Martina and Siegert, Petra and Mesch, K. and Bruhn, H. and Gr{\"o}tzinger, Joachim}, title = {Active site mutants of pyruvate decarboxylase from Zymomonas mobilis : a site-directed mutagenesis study of L112, I472, I476, E473 and N482}, series = {European journal of biochemistry}, volume = {Vol. 257}, journal = {European journal of biochemistry}, number = {Iss. 3}, issn = {1432-1033 (E-Journal); 1742-4658 (E-Journal); 0014-2956 (Print); 1742-464X (Print)}, pages = {538 -- 546}, year = {1998}, language = {en} } @article{BerretzSkorupaSanderetal.2011, author = {Berretz, Frank and Skorupa, Sasche and Sander, Volker and Belloum, Adam and Bubak, Marian}, title = {Actor-Driven Workflow Execution in Distributed Environments}, series = {Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)}, journal = {Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-642-21877-4}, pages = {287 -- 294}, year = {2011}, language = {en} } @article{RitzStender2004, author = {Ritz, Thomas and Stender, Michael}, title = {Ad-hoc Anwendungsintegration mit mobilen CRM-Systement}, series = {Electronic Business : Innovationen, Anwendungen und Technologien}, journal = {Electronic Business : Innovationen, Anwendungen und Technologien}, editor = {Weisbecker, Anette}, publisher = {Fraunhofer-IRB-Verl.}, address = {Stuttgart}, isbn = {3-8167-6621-8}, pages = {92 -- 97}, year = {2004}, language = {de} } @article{ArampatzisKaramanidisAlbracht2007, author = {Arampatzis, Adamantios and Karamanidis, Kiros and Albracht, Kirsten}, title = {Adaptational responses of the human Achilles tendon by modulation of the applied cyclic strain magnitude}, series = {Journal of Experimental Biology}, volume = {210}, journal = {Journal of Experimental Biology}, number = {15}, issn = {0022-0949}, doi = {10.1242/jeb.003814}, pages = {2743 -- 2753}, year = {2007}, language = {en} } @article{KetelhutBrueggeGoelletal.2020, author = {Ketelhut, Maike and Br{\"u}gge, G. M. and G{\"o}ll, Fabian and Braunstein, Bjoern and Albracht, Kirsten and Abel, Dirk}, title = {Adaptive iterative learning control of an industrial robot during neuromuscular training}, series = {IFAC PapersOnLine}, volume = {53}, journal = {IFAC PapersOnLine}, number = {2}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2405-8963}, doi = {10.1016/j.ifacol.2020.12.741}, pages = {16468 -- 16475}, year = {2020}, abstract = {To prevent the reduction of muscle mass and loss of strength coming along with the human aging process, regular training with e.g. a leg press is suitable. However, the risk of training-induced injuries requires the continuous monitoring and controlling of the forces applied to the musculoskeletal system as well as the velocity along the motion trajectory and the range of motion. In this paper, an adaptive norm-optimal iterative learning control algorithm to minimize the knee joint loadings during the leg extension training with an industrial robot is proposed. The response of the algorithm is tested in simulation for patients with varus, normal and valgus alignment of the knee and compared to the results of a higher-order iterative learning control algorithm, a robust iterative learning control and a recently proposed conventional norm-optimal iterative learning control algorithm. Although significant improvements in performance are made compared to the conventional norm-optimal iterative learning control algorithm with a small learning factor, for the developed approach as well as the robust iterative learning control algorithm small steady state errors occur.}, language = {en} } @article{SchuhHoehneHessler2008, author = {Schuh, G{\"u}nther and H{\"o}hne, Tim and Heßler, Stefan}, title = {Adaptive Logistik : Informationsmanagement in der Standplatzmontage}, series = {Karlsruher Arbeitsgespr{\"a}che Produktionsforschung 2008 : Spitzentechnologien f{\"u}r den Wirtschaftsmotor Produktion - Ergebnisse aus dem BMBF-Rahmenkonzept "Forschung f{\"u}r die Produktion von morgen"; Tagungsband zur Veranstaltung am 11. und 12. M{\"a}rz 2008 Kongresszentrum Stadthalle Karlsruhe}, journal = {Karlsruher Arbeitsgespr{\"a}che Produktionsforschung 2008 : Spitzentechnologien f{\"u}r den Wirtschaftsmotor Produktion - Ergebnisse aus dem BMBF-Rahmenkonzept "Forschung f{\"u}r die Produktion von morgen"; Tagungsband zur Veranstaltung am 11. und 12. M{\"a}rz 2008 Kongresszentrum Stadthalle Karlsruhe}, pages = {248 -- 255}, year = {2008}, language = {de} } @article{SchuhKampkerHoehne2006, author = {Schuh, G. and Kampker, A. and H{\"o}hne, Tim}, title = {Adaptive Logistik - Selbststeuerung in Fertigung und Montage}, series = {wt Werkstattstechnik online}, volume = {96}, journal = {wt Werkstattstechnik online}, number = {5}, issn = {1436-4980}, pages = {321 -- 324}, year = {2006}, language = {de} } @article{MertensHenke2001, author = {Mertens, Josef and Henke, Rolf}, title = {Adaptive technologies for future civil air transport}, series = {Air \& Space Europe. 3 (2001), H. 3-4}, journal = {Air \& Space Europe. 3 (2001), H. 3-4}, isbn = {1247-5793}, pages = {80 -- 82}, year = {2001}, language = {en} } @article{EnningStuetzleVierecketal.2006, author = {Enning, Manfred and St{\"u}tzle, Thorsten and Viereck, Uwe and Stribersky, Anton}, title = {Adaptiver Gleitschutz f{\"u}r Schienenfahrzeuge (Adaptive Wheelslide Protection System for Railway Vehicles) / St{\"u}tzle, Thorsten ; Viereck, Uwe ; Enning, Manfred ; Stribersky, Anton ; Rulka, Wolfgang}, series = {at - Automatisierungstechnik . 54 (2006), H. 3}, journal = {at - Automatisierungstechnik . 54 (2006), H. 3}, isbn = {0178-2312}, pages = {139 -- 148}, year = {2006}, language = {de} } @article{EnningStuetzleViereck2006, author = {Enning, Manfred and St{\"u}tzle, T. and Viereck, U.}, title = {Adaptiver Gleitschutz f{\"u}r Schienenfahrzeuge / St{\"u}tzle, T. ; Viereck, U. ; Enning, M. ; Rulka, W. ; Stribersky, A. ; Abel, D.}, series = {Innovations for Europe : VDE-Kongress 2006, 23. - 25. Oktober 2006 in Aachen / Tagungsleiter: W. Schr{\"o}ppel}, journal = {Innovations for Europe : VDE-Kongress 2006, 23. - 25. Oktober 2006 in Aachen / Tagungsleiter: W. Schr{\"o}ppel}, publisher = {VDE-Verl.}, address = {Berlin}, isbn = {3-8007-2979-2}, pages = {401 -- 406}, year = {2006}, language = {de} } @article{AtlasBrealeyDharetal.2012, author = {Atlas, Glen and Brealey, David and Dhar, Sunil and Dikta, Gerhard and Singer, Meryvn}, title = {Additional hemodynamic measurements with an esophageal Doppler monitor: a preliminary report of compliance, force, kinetic energy, and afterload in the clinical setting}, series = {Journal of clinical monitoring and computing}, journal = {Journal of clinical monitoring and computing}, number = {26}, publisher = {Springer Nature}, address = {London}, isbn = {1573-2614}, doi = {10.1007/s10877-012-9386-5}, pages = {473 -- 482}, year = {2012}, abstract = {The esophageal Doppler monitor (EDM) is a minimally-invasive hemodynamic device which evaluates both cardiac output (CO), and fluid status, by estimating stroke volume (SV) and calculating heart rate (HR). The measurement of these parameters is based upon a continuous and accurate approximation of distal thoracic aortic blood flow. Furthermore, the peak velocity (PV) and mean acceleration (MA), of aortic blood flow at this anatomic location, are also determined by the EDM. The purpose of this preliminary report is to examine additional clinical hemodynamic calculations of: compliance (C), kinetic energy (KE), force (F), and afterload (TSVRi). These data were derived using both velocity-based measurements, provided by the EDM, as well as other contemporaneous physiologic parameters. Data were obtained from anesthetized patients undergoing surgery or who were in a critical care unit. A graphical inspection of these measurements is presented and discussed with respect to each patient's clinical situation. When normalized to each of their initial values, F and KE both consistently demonstrated more discriminative power than either PV or MA. The EDM offers additional applications for hemodynamic monitoring. Further research regarding the accuracy, utility, and limitations of these parameters is therefore indicated.}, language = {en} } @article{KaulKoshkaryevArtmannetal.2008, author = {Kaul, D. K. and Koshkaryev, A. and Artmann, Gerhard and Barshtein, G. and Yedgar, S.}, title = {Additive effect of red blood cell rigidity and adherence to endothelial cells in inducing vascular resistance}, series = {American Journal of Physiology : Heart and Circulation Physiology . 295 (2008), H. 4}, volume = {295}, journal = {American Journal of Physiology : Heart and Circulation Physiology . 295 (2008), H. 4}, number = {4}, issn = {1522-1539}, pages = {H1788 -- H1793}, year = {2008}, language = {en} } @article{FateriGebhardt2015, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Additive manufactured mechanical disentanglement lock}, series = {RTejournal - Forum f{\"u}r Rapid Technologie}, volume = {12}, journal = {RTejournal - Forum f{\"u}r Rapid Technologie}, publisher = {Fachhochschule Aachen}, address = {Aachen}, issn = {1614-0923}, url = {http://nbn-resolving.de/urn:nbn:de:0009-2-42147}, year = {2015}, language = {en} } @article{GebhardtSchmidtHoetteretal.2010, author = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick}, title = {Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry}, series = {Physics Procedia}, volume = {5}, journal = {Physics Procedia}, number = {2}, isbn = {1875-3892}, pages = {543 -- 549}, year = {2010}, language = {en} } @article{TemizArtmannAkhisarogluSercanetal.2005, author = {Temiz Artmann, Ayseg{\"u}l and Akhisaroglu, M. and Sercan, Z. and Kayatekin, B. M.}, title = {Adhesion of Erythrocytes to Endothelial Cells After Acute Exercise: Differences in Red Blood Cells from Juvenile and Adult Rats. Temiz Artmann, A.; Akhisaroglu, M.; Sercan, Z.; Kayatekin, BM.; Yorukoglu, K.; Kirkali, G.}, series = {Physiological Research (2005)}, journal = {Physiological Research (2005)}, isbn = {0862-8408}, year = {2005}, language = {en} } @article{KetelhutKolditzGoelletal.2019, author = {Ketelhut, Maike and Kolditz, Melanie and G{\"o}ll, Fabian and Braunstein, Bjoern and Albracht, Kirsten and Abel, Dirk}, title = {Admittance control of an industrial robot during resistance training}, series = {IFAC-PapersOnLine}, volume = {52}, journal = {IFAC-PapersOnLine}, number = {19}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2405-8963}, doi = {10.1016/j.ifacol.2019.12.102}, pages = {223 -- 228}, year = {2019}, abstract = {Neuromuscular strength training of the leg extensor muscles plays an important role in the rehabilitation and prevention of age and wealth related diseases. In this paper, we focus on the design and implementation of a Cartesian admittance control scheme for isotonic training, i.e. leg extension and flexion against a predefined weight. For preliminary testing and validation of the designed algorithm an experimental research and development platform consisting of an industrial robot and a force plate mounted at its end-effector has been used. Linear, diagonal and arbitrary two-dimensional motion trajectories with different weights for the leg extension and flexion part are applied. The proposed algorithm is easily adaptable to trajectories consisting of arbitrary six-dimensional poses and allows the implementation of individualized trajectories.}, language = {en} } @article{FredebeulKrein2003, author = {Fredebeul-Krein, Markus}, title = {Adopting a coherent institutional framework for the Ukrainian telecom sector: Lessons to be learnt from European and German experience}, series = {Zerkalo Nedeli (2003)}, journal = {Zerkalo Nedeli (2003)}, year = {2003}, language = {en} } @article{KaemperPicardSchuetzeetal.2006, author = {K{\"a}mper, Klaus-Peter and Picard, A. and Sch{\"u}tze, A. and Wallach, D.}, title = {Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; K{\"a}mper, K.-P.; Sch{\"u}tze, A.; Wallach, D.; Walter, T.}, series = {Mst-News (2006)}, journal = {Mst-News (2006)}, isbn = {0948-3128}, pages = {15, 16 -- u. 35}, year = {2006}, language = {en} } @article{SelmerBrueserDahl2000, author = {Selmer, Thorsten and Br{\"u}ser, Thomas and Dahl, Christiane}, title = {ADP Sulfurylase" from Thiobacillus denitrificans Is an Adenylylsulfate:Phosphate Adenylyltransferase and Belongs to a New Family of Nucleotidyltransferases / Br{\"u}ser, Thomas ; Selmer, Thorsten ; Dahl, Christiane}, series = {Journal of Biological Chemistry. 275 (2000), H. 3}, journal = {Journal of Biological Chemistry. 275 (2000), H. 3}, isbn = {1083-351X}, pages = {1691 -- 1690}, year = {2000}, language = {en} } @article{LauthChristmannSchwarz1990, author = {Lauth, Jakob and Christmann, K. and Schwarz, E.}, title = {Adsorption geometry of H on RU(1010) image as determined by LEED and HREELS / Christmann, K. ; Lauth, G. ; Schwarz, E.}, series = {Vacuum. 41 (1990), H. 1-3}, journal = {Vacuum. 41 (1990), H. 1-3}, isbn = {0042-207X}, pages = {293 -- 296}, year = {1990}, language = {en} } @article{AkimbekovDigelO’Herasetal.2015, author = {Akimbekov, N.Sh. and Digel, Ilya and O'Heras, C. and Tastambek, K.T. and Savitskaya, I.S. and Ualyeva, P.S. and Mansurov, Z.A. and Zhubanova, A.A.}, title = {Adsorption of bacterial lipopol ysaccharides on carbonized ri ce husks obtained in the batch experiments}, series = {KazNU Bulletin. Biology series}, volume = {60}, journal = {KazNU Bulletin. Biology series}, number = {No 1/2}, issn = {1563-0218}, pages = {144 -- 148}, year = {2015}, language = {en} } @article{ZhubanovaAknazarovMansurovetal.2010, author = {Zhubanova, Azhar A. and Aknazarov, S. K. and Mansurov, Zulkhair and Digel, Ilya and Kozhalakova, A. A. and Akimbekov, Nuraly Shardarbekovich and O'Heras, Carlos and Tazhibayeva, S. and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l}, title = {Adsorption of bacterial Lipopolysaccharides and blood plasma proteins on modified carbonized materials}, year = {2010}, abstract = {Bacterial lipopolysaccharides (endotoxins) show strong biological effects at very low concentrations in human beings and many animals when entering the blood stream. These include affecting structure and function of organs and cells, changing metabolic functions, raising body temperature, triggering the coagulation cascade, modifying hemodynamics and causing septic shock. Because of this toxicity, the removal of even minute amounts is essential for safe parenteral administration of drugs and also for septic shock patients' care. The absence of a general method for endotoxin removal from liquid interfaces urgently requires finding new methods and materials to overcome this gap. Nanostructured carbonized plant parts is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study was comparative measurement of endotoxin- and blood proteins-related adsorption rate and adsorption capacity for different carboneous materials produced at different temperatures and under different surface modifications. As a main surface modificator, positively cbarged polymer, polyethileneimine (PEl) was used. Activated carbon materials showed good adsorption properties for LPS and some proteins used in the experiments. During the batch experiments, several techniques (dust removal, autoclaving) were used and optimized for improving the material's adsorption behavior. Also, with the results obtained it was possible to differentiate the materials according to their adsorption capacity and kinetic characteristics. Modification of the surface apparently has not affected hemoglobin binding to the adsorbent's surface. Obtained adsorption isotherms can be used as a powerful tool for designing of future column-based setups for blood purification from LPS, which is especially important for septic shock treatment.}, subject = {Kohlenstofffaser}, language = {en} } @article{AkimbekovDigelOHerasetal.2014, author = {Akimbekov, N.Sh. and Digel, Ilya and O´Heras, C. and Tastambek, K.T. and Savitskaya, I.S. and Ualyeva, P.S. and Mansurov, Z.A. and Zhubanova, A.A.}, title = {Adsorption of bacterial lipopolysaccharides on carbonized rice husks obtained in the batch experiments}, series = {Experimental Biology}, volume = {60}, journal = {Experimental Biology}, number = {1/2}, publisher = {Al-Farabi Kazakh National University}, address = {Almaty}, issn = {1563-0218}, pages = {144 -- 148}, year = {2014}, abstract = {The scope of this study is the measurement of endotoxin adsorption rate for carbonized rice husk. It showed good adsorption properties for LPS. During the batch experiments, several techniques were used and optimized for improving the material's adsorption behavior. Also, with the results obtained it was possible to differentiate the materials according to their adsorption capacity and kinetic characteristics.}, language = {en} } @article{KozhalakovaZhubanovaMansurovetal.2010, author = {Kozhalakova, A. A. and Zhubanova, Azhar A. and Mansurov, Z. A. and Digel, Ilya and Tazhibayeva, S. M. and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l}, title = {Adsorption of bacterial lipopolysaccharides on carbonized rice shell}, series = {Science of Central Asia (2010)}, journal = {Science of Central Asia (2010)}, pages = {50 -- 54}, year = {2010}, language = {en} } @article{WiesenTippkoetterMuffleretal.2015, author = {Wiesen, Sebastian and Tippk{\"o}tter, Nils and Muffler, Kai and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland}, title = {Adsorption of fatty acids to layered double hydroxides in aqueous systems}, series = {Adsorption}, volume = {21}, journal = {Adsorption}, number = {6-7}, publisher = {Springer}, address = {Berlin}, pages = {459 -- 466}, year = {2015}, abstract = {Due to their anion exchange characteristics, layered double hydroxides (LDHs) are suitable for the detoxification of aqueous, fatty acid containing fermentation substrates. The aim of this study is to examine the adsorption mechanism, using crude glycerol from plant oil esterification as a model system. Changes in the intercalation structure in relation to the amount of fatty acids adsorbed are monitored by X-ray diffraction and infra-red spectroscopy. Additionally, calcination of LDH is investigated in order to increase the binding capacity for fatty acids. Our data propose that, at ambient temperature, fatty acids can be bound to the hydrotalcite by adsorption or in addition by intercalation, depending on fatty acid concentration. The adsorption of fatty acids from crude glycerol shows a BET-like behavior. Above a fatty acid concentration of 3.5 g L-1, intercalation of fatty acids can be shown by the appearance of an increased interlayer spacing. This observation suggests a two phase adsorption process. Calcination of LDHs allows increasing the binding capacity for fatty acids by more than six times, mainly by reduction of structural CO32-.}, language = {en} } @article{WiesenTippkoetterMuffleretal.2014, author = {Wiesen, Sebastian and Tippk{\"o}tter, Nils and Muffler, Kai and Suck, Kirstin and Sohling, Ulrich and Ruf, Nils and Ulber, Roland}, title = {Adsorptive Vorbehandlung von Rohglycerin f{\"u}r die 1,3-Propandiol Fermentation mit Clostridium diolis}, series = {Chemie Ingenieur Technik}, volume = {86}, journal = {Chemie Ingenieur Technik}, number = {1-2}, publisher = {Wiley-VCH}, address = {Weinheim}, doi = {10.1002/cite.201300080}, pages = {129 -- 135}, year = {2014}, abstract = {Bei der Gewinnung von Fetts{\"a}uren aus Pflanzen{\"o}len, z. B. zur Herstellung von Biopolymeren, oder bei der Biodiesel- und Seifenproduktion, f{\"a}llt Glycerin als Nebenprodukt an. Bei der Biokonversion dieses Rohstoffes zu 1,3-Propandiol wird der Produktionsorganismus Clostridium diolis durch Verunreinigungen im Rohglycerin gehemmt. Als inhibierende Substanzen konnten freie Fetts{\"a}uren identifiziert werden. Mithilfe eines adsorptiven Aufarbeitungsverfahrens ist es gelungen, die Fetts{\"a}uren zu entfernen und die Konversionseffizienz zu 1,3-Propandiol zu erh{\"o}hen.}, language = {de} } @article{SchulzeFeyerlPischinger2023, author = {Schulze, Sven and Feyerl, G{\"u}nter and Pischinger, Stefan}, title = {Advanced ECMS for hybrid electric heavy-duty trucks with predictive battery discharge and adaptive operating strategy under real driving conditions}, series = {Energies}, volume = {16}, journal = {Energies}, number = {13}, publisher = {MDPI}, address = {Basel}, issn = {1996-1073}, doi = {10.3390/en16135171}, pages = {29 Seiten, Art. Nr.: 5171}, year = {2023}, abstract = {To fulfil the CO2 emission reduction targets of the European Union (EU), heavy-duty (HD) trucks need to operate 15\% more efficiently by 2025 and 30\% by 2030. Their electrification is necessary as conventional HD trucks are already optimized for the long-haul application. The resulting hybrid electric vehicle (HEV) truck gains most of the fuel saving potential by the recuperation of potential energy and its consecutive utilization. The key to utilizing the full potential of HEV-HD trucks is to maximize the amount of recuperated energy and ensure its intelligent usage while keeping the operating point of the internal combustion engine as efficient as possible. To achieve this goal, an intelligent energy management strategy (EMS) based on ECMS is developed for a parallel HEV-HD truck which uses predictive discharge of the battery and adaptive operating strategy regarding the height profile and the vehicle mass. The presented EMS can reproduce the global optimal operating strategy over long phases and lead to a fuel saving potential of up to 2\% compared with a heuristic strategy. Furthermore, the fuel saving potential is correlated with the investigated boundary conditions to deepen the understanding of the impact of intelligent EMS for HEV-HD trucks.}, language = {en} } @article{AbbasHedwigBalcetal.2023, author = {Abbas, Karim and Hedwig, Lukas and Balc, Nicolae and Bremen, Sebastian}, title = {Advanced FFF of PEEK: Infill strategies and material characteristics for rapid tooling}, series = {Polymers}, volume = {2023}, journal = {Polymers}, number = {15}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/polym15214293}, pages = {Artikel 4293}, year = {2023}, abstract = {Traditional vulcanization mold manufacturing is complex, costly, and under pressure due to shorter product lifecycles and diverse variations. Additive manufacturing using Fused Filament Fabrication and high-performance polymers like PEEK offer a promising future in this industry. This study assesses the compressive strength of various infill structures (honeycomb, grid, triangle, cubic, and gyroid) when considering two distinct build directions (Z, XY) to enhance PEEK's economic and resource efficiency in rapid tooling. A comparison with PETG samples shows the behavior of the infill strategies. Additionally, a proof of concept illustrates the application of a PEEK mold in vulcanization. A peak compressive strength of 135.6 MPa was attained in specimens that were 100\% solid and subjected to thermal post-treatment. This corresponds to a 20\% strength improvement in the Z direction. In terms of time and mechanical properties, the anisotropic grid and isotropic cubic infill have emerged for use in rapid tooling. Furthermore, the study highlights that reducing the layer thickness from 0.15 mm to 0.1 mm can result in a 15\% strength increase. The study unveils the successful utilization of a room-temperature FFF-printed PEEK mold in vulcanization injection molding. The parameters and infill strategies identified in this research enable the resource-efficient FFF printing of PEEK without compromising its strength properties. Using PEEK in rapid tooling allows a cost reduction of up to 70\% in tool production.}, language = {en} } @article{HeuermannRumiantsevSchott2004, author = {Heuermann, Holger and Rumiantsev, A. and Schott, S.}, title = {Advanced on-wafer multiport calibration methods for mono- and mixed-mode device characterization}, series = {On wafer characterization : 63rd ARFTG conference digest, spring 2004, 11 June 2004, Fort Worth, TX / Automatic RF Techniques Group. [Conference chair: John Cable. Publication chair: J. G. Burns]}, journal = {On wafer characterization : 63rd ARFTG conference digest, spring 2004, 11 June 2004, Fort Worth, TX / Automatic RF Techniques Group. [Conference chair: John Cable. Publication chair: J. G. Burns]}, publisher = {IEEE Operations Center}, address = {Piscataway, NJ}, isbn = {0-7803-8371-0}, pages = {91 -- 96}, year = {2004}, language = {en} } @article{KaulenSchwabedalSchneideretal.2022, author = {Kaulen, Lars and Schwabedal, Justus T. C. and Schneider, Jules and Ritter, Philipp and Bialonski, Stephan}, title = {Advanced sleep spindle identification with neural networks}, series = {Scientific Reports}, volume = {12}, journal = {Scientific Reports}, number = {Article number: 7686}, publisher = {Springer Nature}, address = {London}, issn = {2045-2322}, doi = {10.1038/s41598-022-11210-y}, pages = {1 -- 10}, year = {2022}, abstract = {Sleep spindles are neurophysiological phenomena that appear to be linked to memory formation and other functions of the central nervous system, and that can be observed in electroencephalographic recordings (EEG) during sleep. Manually identified spindle annotations in EEG recordings suffer from substantial intra- and inter-rater variability, even if raters have been highly trained, which reduces the reliability of spindle measures as a research and diagnostic tool. The Massive Online Data Annotation (MODA) project has recently addressed this problem by forming a consensus from multiple such rating experts, thus providing a corpus of spindle annotations of enhanced quality. Based on this dataset, we present a U-Net-type deep neural network model to automatically detect sleep spindles. Our model's performance exceeds that of the state-of-the-art detector and of most experts in the MODA dataset. We observed improved detection accuracy in subjects of all ages, including older individuals whose spindles are particularly challenging to detect reliably. Our results underline the potential of automated methods to do repetitive cumbersome tasks with super-human performance.}, language = {en} } @article{MuellerVeggianColauttiConteetal.1999, author = {M{\"u}ller-Veggian, Mattea and Colautti, P. and Conte, V. and De Nardo, L.}, title = {Advanced TEPC (Tissue-equivalent proportional counters) for radiation monitoring}, series = {Annual report / Istituto Nazionale di Fisica Nucleare, LNL, Laboratori Nazionali di Legnaro. 1998 (1999)}, journal = {Annual report / Istituto Nazionale di Fisica Nucleare, LNL, Laboratori Nazionali di Legnaro. 1998 (1999)}, pages = {106}, year = {1999}, language = {en} } @article{SchwagerFleschSchwarzboezletal.2022, author = {Schwager, Christian and Flesch, Robert and Schwarzb{\"o}zl, Peter and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e}}, title = {Advanced two phase flow model for transient molten salt receiver system simulation}, series = {Solar Energy}, volume = {232}, journal = {Solar Energy}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0038-092X (print)}, doi = {10.1016/j.solener.2021.12.065}, pages = {362 -- 375}, year = {2022}, abstract = {In order to realistically predict and optimize the actual performance of a concentrating solar power (CSP) plant sophisticated simulation models and methods are required. This paper presents a detailed dynamic simulation model for a Molten Salt Solar Tower (MST) system, which is capable of simulating transient operation including detailed startup and shutdown procedures including drainage and refill. For appropriate representation of the transient behavior of the receiver as well as replication of local bulk and surface temperatures a discretized receiver model based on a novel homogeneous two-phase (2P) flow modelling approach is implemented in Modelica Dymola®. This allows for reasonable representation of the very different hydraulic and thermal properties of molten salt versus air as well as the transition between both. This dynamic 2P receiver model is embedded in a comprehensive one-dimensional model of a commercial scale MST system and coupled with a transient receiver flux density distribution from raytracing based heliostat field simulation. This enables for detailed process prediction with reasonable computational effort, while providing data such as local salt film and wall temperatures, realistic control behavior as well as net performance of the overall system. Besides a model description, this paper presents some results of a validation as well as the simulation of a complete startup procedure. Finally, a study on numerical simulation performance and grid dependencies is presented and discussed.}, language = {en} } @article{GoettscheReillyWittwer1991, author = {G{\"o}ttsche, Joachim and Reilly, S. and Wittwer, Volker}, title = {Advanced window systems and building energy performance / S. Reilly ; J. G{\"o}ttsche ; V. Wittwer}, series = {Solar World Congress, 1991 : proceedings of the biennial congress of the International Solar Energy Society, Denver, Colorado, USA, 19-23 August 1991 / ed. by M. E. Arden ...}, journal = {Solar World Congress, 1991 : proceedings of the biennial congress of the International Solar Energy Society, Denver, Colorado, USA, 19-23 August 1991 / ed. by M. E. Arden ...}, publisher = {Pergamon Press}, address = {Oxford [u.a.]}, isbn = {0-08-041690-X}, pages = {3211 -- 3216}, year = {1991}, language = {en} }