@article{KatzPoghossianSchoening2017,
  author    = {Katz, Evgeny and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Enzyme-based logic gates and circuits - analytical applications and interfacing with electronics},
  series = {Analytical and Bioanalytical Chemistry},
  volume    = {409},
  journal   = {Analytical and Bioanalytical Chemistry},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1618-2650},
  doi       = {10.1007/s00216-016-0079-7},
  pages     = {81 -- 94},
  year      = {2017},
  abstract  = {The paper is an overview of enzyme-based logic gates and their short circuits, with specific examples of Boolean AND and OR gates, and concatenated logic gates composed of multi-step enzyme-biocatalyzed reactions. Noise formation in the biocatalytic reactions and its decrease by adding a "filter" system, converting convex to sigmoid response function, are discussed. Despite the fact that the enzyme-based logic gates are primarily considered as components of future biomolecular computing systems, their biosensing applications are promising for immediate practical use. Analytical use of the enzyme logic systems in biomedical and forensic applications is discussed and exemplified with the logic analysis of biomarkers of various injuries, e.g., liver injury, and with analysis of biomarkers characteristic of different ethnicity found in blood samples on a crime scene. Interfacing of enzyme logic systems with modified electrodes and semiconductor devices is discussed, giving particular attention to the interfaces functionalized with signal-responsive materials. Future perspectives in the design of the biomolecular logic systems and their applications are discussed in the conclusion.},
  language  = {en}
}
@article{KassabHanPoghossianetal.2004,
  author    = {Kassab, T. and Han, Y. and Poghossian, Arshak and Ingebrandt, S. and Offenh{\"a}usser, A. and Sch{\"o}ning, Michael Josef},
  title     = {Detection of layerby-layer adsorbed polyelectrolytes by means of field-effect based capacitive EIS structures},
  series = {Biomedizinische Technik. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik. 49 (2004), H. 2},
  isbn      = {0932-4666},
  pages     = {1034 -- 1035},
  year      = {2004},
  language  = {en}
}
@article{KaschSchmidtJahnetal.2021,
  author    = {Kasch, Susanne and Schmidt, Thomas and Jahn, Simon and Eichler, Fabian and Thurn, Laura and Bremen, Sebastian},
  title     = {L{\"o}sungsans{\"a}tze und Verfahrenskonzepte zum Laserstrahlschmelzen von Glas},
  series = {Schweissen und Schneiden},
  volume    = {73},
  journal   = {Schweissen und Schneiden},
  number    = {Heft 1-2},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {0036-7184},
  pages     = {32 -- 39},
  year      = {2021},
  language  = {de}
}
@article{KarschuckPoghossianSeretal.2024,
  author    = {Karschuck, Tobias and Poghossian, Arshak and Ser, Joey and Tsokolakyan, Astghik and Achtsnicht, Stefan and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Capacitive model of enzyme-modified field-effect biosensors: Impact of enzyme coverage},
  series = {Sensors and Actuators B: Chemical},
  volume    = {408},
  journal   = {Sensors and Actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005 (Print)},
  doi       = {10.1016/j.snb.2024.135530},
  pages     = {12 Seiten},
  year      = {2024},
  abstract  = {Electrolyte-insulator-semiconductor capacitors (EISCAP) belong to field-effect sensors having an attractive transducer architecture for constructing various biochemical sensors. In this study, a capacitive model of enzyme-modified EISCAPs has been developed and the impact of the surface coverage of immobilized enzymes on its capacitance-voltage and constant-capacitance characteristics was studied theoretically and experimentally. The used multicell arrangement enables a multiplexed electrochemical characterization of up to sixteen EISCAPs. Different enzyme coverages have been achieved by means of parallel electrical connection of bare and enzyme-covered single EISCAPs in diverse combinations. As predicted by the model, with increasing the enzyme coverage, both the shift of capacitance-voltage curves and the amplitude of the constant-capacitance signal increase, resulting in an enhancement of analyte sensitivity of the EISCAP biosensor. In addition, the capability of the multicell arrangement with multi-enzyme covered EISCAPs for sequentially detecting multianalytes (penicillin and urea) utilizing the enzymes penicillinase and urease has been experimentally demonstrated and discussed.},
  language  = {en}
}
@article{KarschuckKaulenPoghossianetal.2021,
  author    = {Karschuck, Tobias and Kaulen, Corinna and Poghossian, Arshak and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Gold nanoparticle-modified capacitive field-effect sensors: Studying the surface density of nanoparticles and coupling of charged polyelectrolyte macromolecules},
  series = {Electrochemical Science Advances},
  volume    = {2},
  journal   = {Electrochemical Science Advances},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0938-5193},
  doi       = {10.1002/elsa.202100179},
  pages     = {10 Seiten},
  year      = {2021},
  abstract  = {The coupling of ligand-stabilized gold nanoparticles with field-effect devices offers new possibilities for label-free biosensing. In this work, we study the immobilization of aminooctanethiol-stabilized gold nanoparticles (AuAOTs) on the silicon dioxide surface of a capacitive field-effect sensor. The terminal amino group of the AuAOT is well suited for the functionalization with biomolecules. The attachment of the positively-charged AuAOTs on a capacitive field-effect sensor was detected by direct electrical readout using capacitance-voltage and constant capacitance measurements. With a higher particle density on the sensor surface, the measured signal change was correspondingly more pronounced. The results demonstrate the ability of capacitive field-effect sensors for the non-destructive quantitative validation of nanoparticle immobilization. In addition, the electrostatic binding of the polyanion polystyrene sulfonate to the AuAOT-modified sensor surface was studied as a model system for the label-free detection of charged macromolecules. Most likely, this approach can be transferred to the label-free detection of other charged molecules such as enzymes or antibodies.},
  language  = {en}
}
@article{KarschuckFilipovBollellaetal.2019,
  author    = {Karschuck, T. L. and Filipov, Y. and Bollella, P. and Sch{\"o}ning, Michael Josef and Katz, E.},
  title     = {Not-XOR (NXOR) logic gate based on an enzyme-catalyzed reaction},
  series = {International Journal of Unconventional Computing},
  volume    = {14},
  journal   = {International Journal of Unconventional Computing},
  number    = {3-4},
  publisher = {Old City Publishing},
  address   = {Philadelphia},
  issn      = {1548-7199},
  pages     = {235 -- 242},
  year      = {2019},
  abstract  = {Enzyme-catalyzed reactions have been designed to mimic various Boolean logic gates in the general framework of unconventional biomolecular computing. While some of the logic gates, particularly OR, AND, are easy to realize with biocatalytic reactions and have been reported in numerous publications, some other, like NXOR, are very challenging and have not been realized yet with enzyme reactions. The paper reports on a novel approach to mimicking the NXOR logic gate using the bell-shaped enzyme activity dependent on pH values. Shifting pH from the optimum value to the acidic or basic values by using acid or base inputs (meaning 1,0 and 0,1 inputs) inhibits the enzyme reaction, while keeping the optimum pH (assuming 0,0 and 1,1 input combinations) preserves a high enzyme activity. The challenging part of the present approach is the selection of an enzyme with a well-demonstrated bell-shape activity dependence on the pH value. While many enzymes can satisfy this condition, we selected pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase as this enzyme has the optimum pH center-located on the pH scale allowing the enzyme activity change by the acidic and basic pH shift from the optimum value corresponding to the highest activity. The present NXOR gate is added to the biomolecular "toolbox" as a new example of Boolean logic gates based on enzyme reactions.},
  language  = {en}
}
@article{KarnatakKantzBialonski2017,
  author    = {Karnatak, Rajat and Kantz, Holger and Bialonski, Stephan},
  title     = {Early warning signal for interior crises in excitable systems},
  series = {Physical Review E},
  volume    = {96},
  journal   = {Physical Review E},
  number    = {4},
  issn      = {2470-0053},
  doi       = {10.1103/PhysRevE.96.042211},
  pages     = {042211},
  year      = {2017},
  language  = {en}
}
@article{KaramanidisAlbrachtBraunsteinetal.2011,
  author    = {Karamanidis, Kiros and Albracht, Kirsten and Braunstein, Bjoern and Catala, Maria Moreno and Goldmann, Jan-Peter and Br{\"u}ggemann, Gert-Peter},
  title     = {Lower leg musculoskeletal geometry and sprint performance},
  series = {Gait and Posture},
  volume    = {34},
  journal   = {Gait and Posture},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0966-6362},
  doi       = {10.1016/j.gaitpost.2011.03.009},
  pages     = {138 -- 141},
  year      = {2011},
  abstract  = {The purpose of this study was to investigate whether sprint performance is related to lower leg musculoskeletal geometry within a homogeneous group of highly trained 100-m sprinters. Using a cluster analysis, eighteen male sprinters were divided into two groups based on their personal best (fast: N = 11, 10.30 ± 0.07 s; slow: N = 7, 10.70 ± 0.08 s). Calf muscular fascicle arrangement and Achilles tendon moment arms (calculated by the gradient of tendon excursion versus ankle joint angle) were analyzed for each athlete using ultrasonography. Achilles tendon moment arm, foot and ankle skeletal geometry, fascicle arrangement as well as the ratio of fascicle length to Achilles tendon moment arm showed no significant (p > 0.05) correlation with sprint performance, nor were there any differences in the analyzed musculoskeletal parameters between the fast and slow sprinter group. Our findings provide evidence that differences in sprint ability in world-class athletes are not a result of differences in the geometrical design of the lower leg even when considering both skeletal and muscular components.},
  language  = {en}
}
@article{KappmeyerKotliarLanzl2009,
  author    = {Kappmeyer, K. and Kotliar, Konstantin and Lanzl, I. M.},
  title     = {Spielen von Blasinstrumenten und Augeninnendruck},
  series = {Zeitschrift f{\"u}r praktische Augenheilkunde \& augen{\"a}rztliche Fortbildung : ZPA},
  volume    = {Bd. 30},
  journal   = {Zeitschrift f{\"u}r praktische Augenheilkunde \& augen{\"a}rztliche Fortbildung : ZPA},
  issn      = {1436-0322},
  pages     = {169 -- 171},
  year      = {2009},
  language  = {de}
}
@article{KapplerTanudyayaSchmittTippkoetteretal.2007,
  author    = {Kappler-Tanudyaya, Nathalie and Schmitt, Heike and Tippk{\"o}tter, Nils and Meyer, Lina and Lenzen, Sigurd and Ulber, Roland},
  title     = {Combination of biotransformation and chromatography for the isolation and purification of mannoheptulose},
  series = {Biotechnology Journal},
  volume    = {2},
  journal   = {Biotechnology Journal},
  number    = {6},
  issn      = {1860-7314},
  doi       = {10.1002/biot.200700004},
  pages     = {692 -- 699},
  year      = {2007},
  abstract  = {Mannoheptulose is a seven-carbon sugar. It is an inhibitor of glucose-induced insulin secretion due to its ability to selectively inhibit the enzyme glucokinase. An improved procedure for mannoheptulose isolation from avocados is described in this study (based upon the original method by La Forge). The study focuses on the combination of biotransformation and downstream processing (preparative chromatography) as an efficient method to produce a pure extract of mannoheptulose. The experiments were divided into two major phases. In the first phase, several methods and parameters were compared to optimize the mannoheptulose extraction with respect to efficiency and purity. In the second phase, a mass balance of mannoheptulose over the whole extraction process was undertaken to estimate the yield and efficiency of the total extraction process. The combination of biotransformation and preparative chromatography allowed the production of a pure mannoheptulose extract. In a biological test, the sugar inhibited the glucokinase enzyme activity efficiently.},
  language  = {en}
}
@article{KapplerForm1985,
  author    = {Kappler, Heinz and Form, J{\"u}rgen},
  title     = {Interaktive Computergraphik im Konstruktionsbuero. Einfuehrung und erste Erfahrungen mit CAD / J{\"u}rgen Form; Heinz Kappler},
  series = {Heitkamp Mitteilungen (1985)},
  journal   = {Heitkamp Mitteilungen (1985)},
  year      = {1985},
  language  = {de}
}
@article{KapelyukhHendersonScheeretal.2019,
  author    = {Kapelyukh, Yury and Henderson, Colin James and Scheer, Nico and Rode, Anja and Wolf, Charles Roland},
  title     = {Defining the contribution of CYP1A1 and CYP1A2 to drug metabolism using humanized CYP1A1/1A2 and Cyp1a1/Cyp1a2 KO mice},
  series = {Drug Metabolism and Disposition},
  journal   = {Drug Metabolism and Disposition},
  number    = {Early view},
  doi       = {10.1124/dmd.119.087718},
  pages     = {43 Seiten},
  year      = {2019},
  language  = {en}
}
@article{KampkerSchleserTriebsetal.2018,
  author    = {Kampker, Achim and Schleser, Markus and Triebs, Johannes and Berg, Alexander-Karl and Hansen, Jan Ole and Fiedler, Falko},
  title     = {Bauteilintegrierte Vorrichtungsfunktionen im Karosseriebau : Aktuelle Ergebnisse im Forschungsprojekt ProeK},
  series = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
  volume    = {113},
  journal   = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
  number    = {11},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {0947-0085},
  doi       = {10.3139/104.112012},
  pages     = {767 -- 770},
  year      = {2018},
  abstract  = {Das Forschungsprojekt Produktionseffizienz in der Kleinserie (ProeK) erarbeitet kosteng{\"u}nstige und effiziente L{\"o}sungsans{\"a}tze f{\"u}r Prozessketten im Zukunftsfeld der Elektromobilit{\"a}t. Das Teilprojekt Karosserie setzt diese Zielsetzung durch innovative und praxisorientierte Produkt- und Prozesskonzepte mit neuartigen bauteilintegrierten Vorrichtungsfunktionen (BiV) um. Im Teilprojekt Außenhaut sollen Toleranzen adaptiv durch Anpassungen der Prozessparameter sowie Bauteilmanipulation kompensiert werden.},
  language  = {de}
}
@article{KaminskyWeberSimonsetal.2005,
  author    = {Kaminsky, Randolph and Weber, Hans-Joachim and Simons, Antoine and Kallweit, Stephan and Kramm, K. and Verdonck, Pascale},
  title     = {Comparison of the flow downstream two prototypes of a new monoleaflet artificial aortic heart valve by means of PIV visualization},
  series = {Computer methods in biomechanics and biomedical engineering. 8 (2005), H. 4, Suppl. 1},
  journal   = {Computer methods in biomechanics and biomedical engineering. 8 (2005), H. 4, Suppl. 1},
  isbn      = {1476-8259},
  pages     = {159 -- 160},
  year      = {2005},
  language  = {en}
}
@article{KaminskySimonsGatzweileretal.2005,
  author    = {Kaminsky, Randolph and Simons, Antoine and Gatzweiler, Karl-Heinz and Weber, Hans-Joachim},
  title     = {Flow visualization by means of PIV of an artificial aortic heart valve fixed into a mock aorta},
  series = {Acta Mechanica Slovaka 2-A. 9 (2005)},
  journal   = {Acta Mechanica Slovaka 2-A. 9 (2005)},
  pages     = {343 -- 348},
  year      = {2005},
  language  = {en}
}
@article{KaminskyKallweitWeberetal.2006,
  author    = {Kaminsky, Radoslav and Kallweit, Stephan and Weber, Hans-Joachim and Simons, Antoine and Kramm, K. and Jazwik, K. and Moll, J. and Verdonck, P.},
  title     = {3D high speed piv assessment of a new aortic heart valve prototype},
  series = {Journal of biomechanics. 39 (2006), H. Supplement 1},
  journal   = {Journal of biomechanics. 39 (2006), H. Supplement 1},
  publisher = {-},
  isbn      = {0021-9290},
  pages     = {S304 -- S305},
  year      = {2006},
  language  = {en}
}
@article{KaminskyKallweitWeberetal.2007,
  author    = {Kaminsky, Radoslav and Kallweit, Stephan and Weber, Hans-Joachim and Claessens, Tom and Jozwik, Krzystof and Verdonck, Pascal},
  title     = {Flow visualization through two types of aortic prosthetic heart valves using stereoscopic high-speed particle image velocimetry},
  series = {Artificial organs. 31 (2007), H. 12},
  journal   = {Artificial organs. 31 (2007), H. 12},
  isbn      = {1525-1594},
  pages     = {869 -- 879},
  year      = {2007},
  language  = {en}
}
@article{KaminskyDumontWeberetal.2007,
  author    = {Kaminsky, Radoslav and Dumont, K. and Weber, Hans-Joachim and Schroll, M. and Verdonck, P.},
  title     = {PIV validation of blood-heart valve leaflet interaction modelling},
  series = {The International journal of artificial organs. 30 (2007), H. 7},
  journal   = {The International journal of artificial organs. 30 (2007), H. 7},
  publisher = {-},
  pages     = {640 -- 648},
  year      = {2007},
  language  = {en}
}
@article{KaltschmittThraenFredebeulKreinetal.2006,
  author    = {Kaltschmitt, Martin and Thr{\"a}n, Daniela and Fredebeul-Krein, Markus and Vogel, Erika and Kalitzky, Thomas and Ehrhart, Karl Martin and Hoppe, Christian and Seifert, Stefan and Sijm, Jos and B{\"o}hringer, Christoph and Hoffmann, Tim and Moslener, Ulf and Sturm, Bodo and Diekmann, Jochen and Schleich, Joachim},
  title     = {CO2-Emissionshandel},
  series = {Zeitschrift f{\"u}r Energiewirtschaft},
  volume    = {Vol. 30},
  journal   = {Zeitschrift f{\"u}r Energiewirtschaft},
  number    = {Iss. 4},
  issn      = {0343-5377 (Print) 1866-2765 (Online)},
  pages     = {271 -- 314},
  year      = {2006},
  language  = {de}
}
@article{KallweitWillertDuesetal.2008,
  author    = {Kallweit, Stephan and Willert, Chris and Dues, Michael and M{\"u}ller, Ulrich},
  title     = {PIV for Volume Flow Metering / Kallweit, Stephan ; Willert, Chris ; Dues, Michael ; M{\"u}ller, Ulrich ; Lederer, Thomas},
  pages     = {6 S.},
  year      = {2008},
  language  = {en}
}
@article{KallweitVanlanduitVanherzeeleetal.2007,
  author    = {Kallweit, Stephan and Vanlanduit, S. and Vanherzeele, J. and Brouns, M.},
  title     = {Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.},
  series = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  journal   = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  pages     = {1 -- 14},
  year      = {2007},
  language  = {en}
}
@article{KallweitUchiyamaSiekmann1998,
  author    = {Kallweit, Stephan and Uchiyama, R. and Siekmann, H.},
  title     = {Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H.},
  series = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  journal   = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  isbn      = {1542-3034},
  pages     = {49 -- 59},
  year      = {1998},
  language  = {en}
}
@article{KallweitSchimpf2003,
  author    = {Kallweit, Stephan and Schimpf, Axel},
  title     = {Photogrammetric Particle Image Velocimetry / Schimpf, Axel ; Kallweit, Stephan},
  series = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...},
  journal   = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-21423-2},
  pages     = {295},
  year      = {2003},
  language  = {en}
}
@article{KallweitKorculaninFroehligetal.2011,
  author    = {Kallweit, Stephan and Korculanin, O. and Fr{\"o}hlig, F. and Gabi, M. and Mattern, P.},
  title     = {Photogrammetrische Rekonstruktion von Partikelpositionen mittels R{\"u}ckprojektion f{\"u}r 3D-PIV},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik : 19. Fachtagung, 6. - 8. September 2011, Ilmenau ; [Tagungsband enth{\"a}lt ... Beitr{\"a}ge, die anl{\"a}sslich der 19. Fachtagaung "Lasermethoden in der Str{\"o}mungsmesstechnik" ... vorgetragen und diskutiert wurden] / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg. A. Thess...},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik : 19. Fachtagung, 6. - 8. September 2011, Ilmenau ; [Tagungsband enth{\"a}lt ... Beitr{\"a}ge, die anl{\"a}sslich der 19. Fachtagaung "Lasermethoden in der Str{\"o}mungsmesstechnik" ... vorgetragen und diskutiert wurden] / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg. A. Thess...},
  publisher = {Dt. Ges. f{\"u}r Laser-AnemometrieGALA e. V.},
  address   = {Karlsruhe},
  isbn      = {978-3-9805613-7-2},
  pages     = {28/1 -- 28/6},
  year      = {2011},
  language  = {de}
}
@article{KallweitKisifeUtzenradetal.2008,
  author    = {Kallweit, Stephan and Kisife, F. and Utzenrad, M. and Weber, J.},
  title     = {Hispeed Scanning Stereo PIV hinter einer k{\"u}nstlichen Herzklappe / Kallweit, S. ; Kisife, F. ; Utzenrad, M. ; Weber, J.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik : 16. Fachtagung, 9. - 11. September 2008, Karlsruhe / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg.: B. Ruck},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik : 16. Fachtagung, 9. - 11. September 2008, Karlsruhe / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg.: B. Ruck},
  publisher = {GALA e.V.},
  address   = {Karlsruhe},
  isbn      = {978-3-9805613-4-1},
  pages     = {29},
  year      = {2008},
  language  = {de}
}
@article{KallweitKaminskyRossietal.2008,
  author    = {Kallweit, Stephan and Kaminsky, Radoslav and Rossi, Massimiliano and Morbiducci, Umberto},
  title     = {PIV Measurements of Flows in Artificial Heart Valves / Kaminsky, Radoslav ; Kallweit, Stephan ; Rossi, Massimiliano ; Morbiducci, Umberto ; Scalise, Lorenzo},
  series = {Particle Image Velocimetry - New Developments and Recent Applications},
  journal   = {Particle Image Velocimetry - New Developments and Recent Applications},
  isbn      = {978-3-540-73528-1},
  pages     = {55 -- 72},
  year      = {2008},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Scalise, L.},
  title     = {PIV Measurements with high temporal Resolution behind Artificial Heart Valves / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P.},
  series = {Proceedings of the 6th International Symposium on Particle Image Velocimetry},
  journal   = {Proceedings of the 6th International Symposium on Particle Image Velocimetry},
  publisher = {Caltech},
  address   = {Pasadena, CA},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {946},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {2D PIV Study of the flow downstream : Two prototypes of a ney monoleaflet artificial aortic heart valve prosthesis / Kaminsky, R. ; Kramm, K. ; Weber, H. J. ; Simons, A. P. ; Kallweit, S. ; Verdonck, P. R.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {921},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {3D PIV measurements of prosthetic heart valve dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Castellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {868},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyCanneytetal.2007,
  author    = {Kallweit, Stephan and Kaminsky, R. and Canneyt, C. van and Eloot, S.},
  title     = {High-Speed und Stereo-PIV in einem k{\"u}nstlichen Blutgef{\"a}ß / Kallweit, S. ; Kaminsky, R. ; Canneyt, C. van ; Eloot, S.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  isbn      = {978-3-86009-007-7},
  pages     = {48},
  year      = {2007},
  language  = {de}
}
@article{KallweitHelbingOrglmeisteretal.1994,
  author    = {Kallweit, Stephan and Helbing, M. and Orglmeister, R. and Siekmann, H. E.},
  title     = {Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J.},
  series = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  journal   = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  address   = {Toulouse},
  pages     = {87 -- 94},
  year      = {1994},
  language  = {en}
}
@article{KallweitEbingerDuesetal.1993,
  author    = {Kallweit, Stephan and Ebinger, G. and Dues, M. and Siekmann, H.},
  title     = {Anwendung des Laserlichtschnitt-Verfahrens zur qualitativen Untersuchung der Durchstr{\"o}mung von Kreiselpumpen / Ebinger, G. ; Kallweit, S. ; Dues, M. ; Siekmann, H.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik, 2. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), PTB Braunschweig, DE, 14.-16. Sep, 1993},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik, 2. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), PTB Braunschweig, DE, 14.-16. Sep, 1993},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-86111-595-6},
  pages     = {37.1 -- 37.4},
  year      = {1993},
  language  = {de}
}
@article{KallweitDuesRadke1994,
  author    = {Kallweit, Stephan and Dues, Michael and Radke, Michael},
  title     = {M{\"o}glichkeiten und Grenzen laseroptischer Verfahren zur Untersuchung hydraulischer Str{\"o}mungsmaschinen / Dues, Michael ; Kallweit, Stephan ; Radke, Michael},
  series = {Forschung im Ingenieurwesen. 60 (1994), H. 11-12},
  journal   = {Forschung im Ingenieurwesen. 60 (1994), H. 11-12},
  isbn      = {0015-7899},
  pages     = {332 -- 336},
  year      = {1994},
  language  = {de}
}
@article{KallweitDuesMuelleretal.2007,
  author    = {Kallweit, Stephan and Dues, Michael and M{\"u}ller, Ulli and Lederer, Thomas},
  title     = {Einsatz der Particle Image Velocimetry zur Untersuchung von Rohrstr{\"o}mungen / Kallweit, Stephan ; Dues, Michael ; M{\"u}ller, Ulli ; Lederer, Thomas ; Schroll, Michael ; Willert, Christian},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  isbn      = {978-3-86009-007-7},
  pages     = {35},
  year      = {2007},
  language  = {de}
}
@article{KallweitDuesSiekmann1994,
  author    = {Kallweit, Stephan and Dues, M. W. and Siekmann, H. E.},
  title     = {Spectral Analysis of Pressure Fluctuations and Velocity Fields as Investigated on Propeller Pumps / Dues, M. W. ; Kallweit, S. D. ; Siekmann, H. E.},
  series = {Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.},
  journal   = {Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.},
  pages     = {98 -- 112},
  year      = {1994},
  language  = {en}
}
@article{KallweitDuesSiekmann1994,
  author    = {Kallweit, Stephan and Dues, M. and Siekmann, H.},
  title     = {Particle-Image-Velocimetry (PIV) in rotierenden Maschinen / Dues, M. ; Kallweit, S. ; Siekmann, H.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8265-0162-4},
  pages     = {19.1 -- 19-5},
  year      = {1994},
  language  = {en}
}
@article{KallweitAbromeitDuesetal.1994,
  author    = {Kallweit, Stephan and Abromeit, W. and Dues, M. and Siekmann, H.},
  title     = {Anwendung der LDA zur Untersuchung der instation{\"a}ren Str{\"o}mung im Nachleitrad einer axialen Kreiselpumpenstufe / Abromeit, W. ; Dues, M. ; Siekmann, H. ; Kallweit, S.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8265-0162-4},
  pages     = {27.1 -- 27.6},
  year      = {1994},
  language  = {de}
}
@article{KalbeKuropkaMeyerStorketal.1988,
  author    = {Kalbe, Jochen and Kuropka, Rolf and Meyer-Stork, L. Sebastian and Berndt, Heinz and Sauter, Sybille L. and Loss, Peter and Hendo, Karsten and Riesner, Detlev and H{\"o}cker, Hartwig},
  title     = {Isolation and characterization of high-molecular mass DNA from hair shafts},
  series = {Biological chemistry},
  volume    = {369},
  journal   = {Biological chemistry},
  number    = {1},
  isbn      = {0177-3593},
  doi       = {10.1515/bchm3.1988.369.1.413},
  pages     = {413 -- 416},
  year      = {1988},
  language  = {en}
}
@article{KalbeHoeckerBerndt1989,
  author    = {Kalbe, Jochen and H{\"o}cker, Hartwig and Berndt, Heinz},
  title     = {Design of enzyme reactors as chromatographic columns for racemic resolution of amino acid esters},
  series = {Chromatographia},
  volume    = {28},
  journal   = {Chromatographia},
  number    = {3-4},
  isbn      = {0009-5893},
  doi       = {10.1007/BF02319646},
  pages     = {193 -- 196},
  year      = {1989},
  language  = {en}
}
@article{KahmannRauschPluemeretal.2022,
  author    = {Kahmann, Stephanie L. and Rausch, Valentin and Pl{\"u}mer, Jonathan and M{\"u}ller, Lars P. and Pieper, Martin and Wegmann, Kilian},
  title     = {The automized fracture edge detection and generation of three-dimensional fracture probability heat maps},
  series = {Medical Engineering \& Physics},
  volume    = {2022},
  journal   = {Medical Engineering \& Physics},
  number    = {110},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1350-4533},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {With proven impact of statistical fracture analysis on fracture classifications, it is desirable to minimize the manual work and to maximize repeatability of this approach. We address this with an algorithm that reduces the manual effort to segmentation, fragment identification and reduction. The fracture edge detection and heat map generation are performed automatically. With the same input, the algorithm always delivers the same output. The tool transforms one intact template consecutively onto each fractured specimen by linear least square optimization, detects the fragment edges in the template and then superimposes them to generate a fracture probability heat map. We hypothesized that the algorithm runs faster than the manual evaluation and with low (< 5 mm) deviation. We tested the hypothesis in 10 fractured proximal humeri and found that it performs with good accuracy (2.5 mm ± 2.4 mm averaged Euclidean distance) and speed (23 times faster). When applied to a distal humerus, a tibia plateau, and a scaphoid fracture, the run times were low (1-2 min), and the detected edges correct by visual judgement. In the geometrically complex acetabulum, at a run time of 78 min some outliers were considered acceptable. An automatically generated fracture probability heat map based on 50 proximal humerus fractures matches the areas of high risk of fracture reported in medical literature. Such automation of the fracture analysis method is advantageous and could be extended to reduce the manual effort even further.},
  language  = {en}
}
@article{JoerissenHeger2014,
  author    = {J{\"o}rissen, J{\"o}rg and Heger, Michael},
  title     = {Zur Wirkung hochschuldidaktisch fundierter und in den Fachbereichen verankerter Lehrveranstaltungsevaluation},
  series = {Qualit{\"a}t in der Wissenschaft (QiW)},
  volume    = {8},
  journal   = {Qualit{\"a}t in der Wissenschaft (QiW)},
  number    = {2+3},
  publisher = {Universit{\"a}tsverlag Webler},
  address   = {Bielefeld},
  issn      = {1860-3041},
  pages     = {70 -- 80},
  year      = {2014},
  language  = {de}
}
@article{JungbluthBorchert2008,
  author    = {Jungbluth, Christian and Borchert, J{\"o}rg},
  title     = {M{\"o}glichkeiten der Strompreisbeeinflussung im oligopolistischen Markt},
  series = {ZNER Zeitschrift f{\"u}r Neues Energierecht},
  journal   = {ZNER Zeitschrift f{\"u}r Neues Energierecht},
  number    = {4},
  pages     = {314 -- 323},
  year      = {2008},
  language  = {de}
}
@article{JungStaatMueller2018,
  author    = {Jung, Alexander and Staat, Manfred and M{\"u}ller, Wolfram},
  title     = {Corrigendum to "Flight style optimization in ski jumping on normal, large, and ski flying hills" [J. Biomech 47 (2014) 716-722]},
  series = {Journals of Biomechanics},
  journal   = {Journals of Biomechanics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2018.02.001},
  pages     = {313},
  year      = {2018},
  language  = {en}
}
@article{JungStaatMueller2013,
  author    = {Jung, Alexander and Staat, Manfred and M{\"u}ller, Wolfram},
  title     = {Flight style optimization in ski jumping on normal, large, and ski flying hills},
  series = {Journal of biomechanics},
  volume    = {Vol. 47},
  journal   = {Journal of biomechanics},
  number    = {Iss. 3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2380 (E-Journal); 0021-9290 (Print)},
  pages     = {716 -- 722},
  year      = {2013},
  language  = {en}
}
@article{JungStaat2020,
  author    = {Jung, Alexander and Staat, Manfred},
  title     = {Erratum to "Modeling and simulation of human induced pluripotent stem cell-derived cardiac tissue" [GAMM-Mitteilungen, (2019), 42, 4, 10.1002/gamm.201900002]},
  series = {GAMM-Mitteilungen},
  volume    = {43},
  journal   = {GAMM-Mitteilungen},
  number    = {4},
  publisher = {Wiley-VCH GmbH},
  address   = {Weinheim},
  issn      = {1522-2608},
  doi       = {10.1002/gamm.202000011},
  year      = {2020},
  language  = {en}
}
@article{JungStaat2019,
  author    = {Jung, Alexander and Staat, Manfred},
  title     = {Modeling and simulation of human induced pluripotent stem cell-derived cardiac tissue},
  series = {GAMM - Mitteilungen der Gesellschaft f{\"u}r Angewandte Mathematik und Mechanik},
  volume    = {42},
  journal   = {GAMM - Mitteilungen der Gesellschaft f{\"u}r Angewandte Mathematik und Mechanik},
  number    = {4},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1522-2608},
  doi       = {10.1002/gamm.201900002},
  pages     = {11 Seiten},
  year      = {2019},
  language  = {en}
}
@article{JungMuellerStaat2018,
  author    = {Jung, Alexander and M{\"u}ller, Wolfram and Staat, Manfred},
  title     = {Wind and fairness in ski jumping: A computer modelling analysis},
  series = {Journal of Biomechanics},
  journal   = {Journal of Biomechanics},
  number    = {75},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2018.05.001},
  pages     = {147 -- 153},
  year      = {2018},
  abstract  = {Wind is closely associated with the discussion of fairness in ski jumping. To counter-act its influence on the jump length, the International Ski Federation (FIS) has introduced a wind compensation approach. We applied three differently accurate computer models of the flight phase with wind (M1, M2, and M3) to study the jump length effects of various wind scenarios. The previously used model M1 is accurate for wind blowing in direction of the flight path, but inaccuracies are to be expected for wind directions deviating from the tangent to the flight path. M2 considers the change of airflow direction, but it does not consider the associated change in the angle of attack of the skis which additionally modifies drag and lift area time functions. M3 predicts the length effect for all wind directions within the plane of the flight trajectory without any mathematical simplification. Prediction errors of M3 are determined only by the quality of the input data: wind velocity, drag and lift area functions, take-off velocity, and weight. For comparing the three models, drag and lift area functions of an optimized reference jump were used. Results obtained with M2, which is much easier to handle than M3, did not deviate noticeably when compared to predictions of the reference model M3. Therefore, we suggest to use M2 in future applications. A comparison of M2 predictions with the FIS wind compensation system showed substantial discrepancies, for instance: in the first flight phase, tailwind can increase jump length, and headwind can decrease it; this is opposite of what had been anticipated before and is not considered in the current wind compensation system in ski jumping.},
  language  = {en}
}
@article{JungMuellerStaat2019,
  author    = {Jung, Alexander and M{\"u}ller, Wolfram and Staat, Manfred},
  title     = {Optimization of the flight technique in ski jumping: the influence of wind},
  number    = {Early view},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.jbiomech.2019.03.023},
  year      = {2019},
  language  = {en}
}
@article{JossekBongaertsSprenger2001,
  author    = {Jossek, Ralf and Bongaerts, Johannes and Sprenger, Georg A.},
  title     = {Characterization of a new feedback-resistant 3-deoxy-D-arabinoheptulosonate 7-phosphate synthase AroF of Escherichia coli},
  series = {FEMS microbiology letters},
  volume    = {Vol. 202},
  journal   = {FEMS microbiology letters},
  number    = {Iss. 1},
  issn      = {1574-6968},
  pages     = {145 -- 148},
  year      = {2001},
  language  = {en}
}
@article{JordanKruegerWillmesetal.2011,
  author    = {Jordan, Sabine D. and Kr{\"u}ger, Markus and Willmes, Diana M. and Redemann, Nora and Wunderlich, F. Thomas and Br{\"o}nneke, Hella S. and Merkwirth, Carsten and Kashkar, Hamid and Olkkonen, Vesa M. and B{\"o}ttger, Thomas and Braun, Thomas and Seibler, Jost and Br{\"u}ning, Jens C.},
  title     = {Obesity-induced overexpression of miRNA-143 inhibits insulin-stimulated AKT activation and impairs glucose metabolism},
  series = {Nature Cell Biology},
  volume    = {13},
  journal   = {Nature Cell Biology},
  number    = {4},
  publisher = {Nature},
  address   = {New York},
  issn      = {1465-7392},
  doi       = {10.1038/ncb2211},
  pages     = {434 -- 446},
  year      = {2011},
  abstract  = {The contribution of altered post-transcriptional gene silencing to the development of insulin resistance and type 2 diabetes mellitus so far remains elusive. Here, we demonstrate that expression of microRNA (miR)-143 and 145 is upregulated in the liver of genetic and dietary mouse models of obesity. Induced transgenic overexpression of miR-143, but not miR-145, impairs insulin-stimulated AKT activation and glucose homeostasis. Conversely, mice deficient for the miR-143-145 cluster are protected from the development of obesity-associated insulin resistance. Quantitative-mass-spectrometry-based analysis of hepatic protein expression in miR-143-overexpressing mice revealed miR-143-dependent downregulation of oxysterol-binding-protein-related protein (ORP) 8. Reduced ORP8 expression in cultured liver cells impairs the ability of insulin to induce AKT activation, revealing an ORP8-dependent mechanism of AKT regulation. Our experiments provide direct evidence that dysregulated post-transcriptional gene silencing contributes to the development of obesity-induced insulin resistance, and characterize the miR-143-ORP8 pathway as a potential target for the treatment of obesity-associated diabetes.},
  language  = {en}
}
@article{JochimMenzel2018,
  author    = {Jochim, Haldor E. and Menzel, Christoph J.},
  title     = {Die Trassenb{\"u}ndelung als Planungsmethode nachhaltiger Verkehrspolitik},
  series = {Der Eisenbahningenieur : EI},
  volume    = {69},
  journal   = {Der Eisenbahningenieur : EI},
  number    = {11},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2810},
  pages     = {26 -- 31},
  year      = {2018},
  language  = {de}
}
@article{JochimMenzel2006,
  author    = {Jochim, Haldor E. and Menzel, Christoph},
  title     = {Ist der Bachelor des Diplom-Ingenieurs Untergang? Chancen, Risiken und Perspektiven des neuen Studiensystems},
  series = {EI - Eisenbahningenieur. 57 (2006), H. 7},
  journal   = {EI - Eisenbahningenieur. 57 (2006), H. 7},
  isbn      = {0013-2810},
  pages     = {52 -- 56},
  year      = {2006},
  language  = {de}
}
@article{Jochim2000,
  author    = {Jochim, Haldor E.},
  title     = {Verkehrswirtschaftliche Ermittlung von Qualit{\"a}tsmaßst{\"a}ben im Eisenbahnbetrieb},
  series = {Der Eisenbahningenieur : Elektronische Ressource : EI / Verband Deutscher Eisenbahn-Ingenieure e.V. (VDEI). 51 (2000), H. 7},
  journal   = {Der Eisenbahningenieur : Elektronische Ressource : EI / Verband Deutscher Eisenbahn-Ingenieure e.V. (VDEI). 51 (2000), H. 7},
  isbn      = {0013-2810},
  pages     = {5 -- 8},
  year      = {2000},
  language  = {de}
}
@article{Jochim1996,
  author    = {Jochim, Haldor E.},
  title     = {Versp{\"a}tungsbewertung im Schienenpersonenfernverkehr in Deutschland},
  series = {Doprava a kvalita II : zborn{\´i}k = Verkehr und Qualit{\"a}t II / 4. Medzin{\´a}rodn{\´e} Vedeck{\´e} Dopravn{\´e} Kolokvium EIPOS, Žilina, 19. - 21.9.1996. Eur{\´o}psky Inštit{\´u}t pre Postgradu{\´a}lne Vzdel{\´a}vanie TU Dr{\´a}ž\&\#271;any ... [Zost. František Schlosser]},
  journal   = {Doprava a kvalita II : zborn{\´i}k = Verkehr und Qualit{\"a}t II / 4. Medzin{\´a}rodn{\´e} Vedeck{\´e} Dopravn{\´e} Kolokvium EIPOS, Žilina, 19. - 21.9.1996. Eur{\´o}psky Inštit{\´u}t pre Postgradu{\´a}lne Vzdel{\´a}vanie TU Dr{\´a}ž\&\#271;any ... [Zost. František Schlosser]},
  publisher = {Vysok{\´a} Škola Dopravy a Spojov},
  address   = {Žilina},
  pages     = {203 S : graph. Darst},
  year      = {1996},
  language  = {de}
}
@article{Jochim2000,
  author    = {Jochim, Haldor E.},
  title     = {Verkehrswirtschaftliche Ermittlung von Qualit{\"a}tsmaßst{\"a}ben im Eisenbahnbetrieb},
  series = {Eisenbahntechnische Rundschau : ETR ; Zeitschrift f{\"u}r die gesamte Eisenbahntechnik. 49 (2000), H. 6},
  journal   = {Eisenbahntechnische Rundschau : ETR ; Zeitschrift f{\"u}r die gesamte Eisenbahntechnik. 49 (2000), H. 6},
  year      = {2000},
  language  = {de}
}
@article{Jochim2001,
  author    = {Jochim, Haldor E.},
  title     = {Die Kapazit{\"a}t von Engpassstrecken der Eisenbahn bei der Trennung von Netz und Betrieb},
  series = {Verkehrswissenschaftliche Tage der Hochschule f{\"u}r Verkehrswesen "Friedrich List" in Dresden / Technische Universit{\"a}t Dresden, Fakult{\"a}t Verkehrswissenschaften},
  journal   = {Verkehrswissenschaftliche Tage der Hochschule f{\"u}r Verkehrswesen "Friedrich List" in Dresden / Technische Universit{\"a}t Dresden, Fakult{\"a}t Verkehrswissenschaften},
  year      = {2001},
  language  = {de}
}
@article{Jochim2003,
  author    = {Jochim, Haldor E.},
  title     = {Wieviel d{\"u}rfen Versp{\"a}tungsgarantien kosten?},
  series = {Verkehrswissenschaftliche Tage der Hochschule f{\"u}r Verkehrswesen "Friedrich List" in Dresden / Technische Universit{\"a}t Dresden, Fakult{\"a}t Verkehrswissenschaften},
  journal   = {Verkehrswissenschaftliche Tage der Hochschule f{\"u}r Verkehrswesen "Friedrich List" in Dresden / Technische Universit{\"a}t Dresden, Fakult{\"a}t Verkehrswissenschaften},
  year      = {2003},
  language  = {de}
}
@article{Jochim2002,
  author    = {Jochim, Haldor E.},
  title     = {Charging rail operators for delays - how not to do it},
  series = {Networks for mobility : International Symposium, September 18 - 20, 2002, Stuttgart, Germany ; proceedings / University of Stuttgart, Centre of Transporation Research (FOVUS). W. M{\"o}hlenbrink ... (eds.)},
  journal   = {Networks for mobility : International Symposium, September 18 - 20, 2002, Stuttgart, Germany ; proceedings / University of Stuttgart, Centre of Transporation Research (FOVUS). W. M{\"o}hlenbrink ... (eds.)},
  publisher = {FOVUS},
  address   = {Stuttgart},
  isbn      = {3893010858},
  year      = {2002},
  language  = {en}
}
@article{Jochim2004,
  author    = {Jochim, Haldor E.},
  title     = {A traffic resistance model of long-distance travel},
  series = {Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of},
  journal   = {Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of},
  publisher = {FOVUS},
  address   = {Stuttgart},
  isbn      = {3-89301-180-3},
  pages     = {X, 84 S. : graph. Darst. + 1 CD-ROM},
  year      = {2004},
  language  = {en}
}
@article{Jochim2006,
  author    = {Jochim, Haldor E.},
  title     = {Warum Ingenieure nicht rechnen und Controller nicht sch{\"a}tzen k{\"o}nnen},
  series = {EI - Eisenbahningenieur. 57 (2006), H. 1},
  journal   = {EI - Eisenbahningenieur. 57 (2006), H. 1},
  isbn      = {0013-2810},
  pages     = {54 -- 56},
  year      = {2006},
  language  = {de}
}
@article{Jochim2005,
  author    = {Jochim, Haldor E.},
  title     = {Versp{\"a}tungen auf Stammstrecken - wie man sie (nicht) in den Griff bekommt},
  series = {Der Nahverkehr. 23 (2005), H. 6},
  journal   = {Der Nahverkehr. 23 (2005), H. 6},
  isbn      = {0722-8287},
  year      = {2005},
  language  = {de}
}
@article{Jochim2007,
  author    = {Jochim, Haldor E.},
  title     = {Versp{\"a}tungsentsch{\"a}digungen der Bahnen. Verkehrswirtschaftliche Anmerkungen zum Regierungsgutachten "Verbraucherschutz und Kundenrechte im {\"o}ffentlichen Personenverkehr".},
  series = {Internationales Verkehrswesen. 59 (2007), H. 3},
  journal   = {Internationales Verkehrswesen. 59 (2007), H. 3},
  isbn      = {0020-9511},
  pages     = {95 -- 99},
  year      = {2007},
  language  = {de}
}
@article{Jochim2012,
  author    = {Jochim, Haldor E.},
  title     = {Die Ostheidebahn - eine Alternative zur Y-Trasse},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {61},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {11},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {34 -- 37},
  year      = {2012},
  language  = {de}
}
@article{Jochim2007,
  author    = {Jochim, Haldor E.},
  title     = {Beurteilung der Ausbaunotwendigkeit von Eisenbahn-Streckenabschnitten - ein anspruchsloses Verfahren},
  series = {Eisenbahn-Ingenieur-Kalender 2008 : EIK ; Jahrbuch f{\"u}r Schienenverkehr \& Technik / Hrsg. Verband Deutscher Eisenbahn-Ingenieure e.V., VDEI},
  journal   = {Eisenbahn-Ingenieur-Kalender 2008 : EIK ; Jahrbuch f{\"u}r Schienenverkehr \& Technik / Hrsg. Verband Deutscher Eisenbahn-Ingenieure e.V., VDEI},
  isbn      = {0934-5930},
  pages     = {333 -- 342},
  year      = {2007},
  language  = {de}
}
@article{JiminezGermanBehbahaniMiettinenetal.2013,
  author    = {Jiminez German, Salvador and Behbahani, Mehdi and Miettinen, Susanna and Grijpma, Dirk W. and Haimi, Suvi P.},
  title     = {Proliferation and differentiation of adipose stem cells towards smooth muscle cells on poly(trimethylene carbonate) membranes},
  series = {Macromolecular symposia},
  volume    = {Vol. 334},
  journal   = {Macromolecular symposia},
  number    = {Iss. 1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {0258-0322},
  pages     = {133 -- 142},
  year      = {2013},
  language  = {en}
}
@article{JildehWagnerSchoeningetal.2015,
  author    = {Jildeh, Zaid B. and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Pieper, Martin},
  title     = {Simulating the electromagnetic-thermal treatment of thin aluminium layers for adhesion improvement},
  series = {Physica status solidi (a)},
  volume    = {Vol. 212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431893},
  pages     = {1234 -- 1241},
  year      = {2015},
  abstract  = {A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed.},
  language  = {en}
}
@article{JildehOberlaenderKirchneretal.2018,
  author    = {Jildeh, Zaid B. and Oberl{\"a}nder, Jan and Kirchner, Patrick and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Thermocatalytic Behavior of Manganese (IV) Oxide as Nanoporous Material on the Dissociation of a Gas Mixture Containing Hydrogen Peroxide},
  series = {Nanomaterials},
  volume    = {8},
  journal   = {Nanomaterials},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-4991},
  doi       = {10.3390/nano8040262},
  pages     = {Artikel 262},
  year      = {2018},
  abstract  = {In this article, we present an overview on the thermocatalytic reaction of hydrogen peroxide (H₂O₂) gas on a manganese (IV) oxide (MnO₂) catalytic structure. The principle of operation and manufacturing techniques are introduced for a calorimetric H₂O₂ gas sensor based on porous MnO₂. Results from surface analyses by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) of the catalytic material provide indication of the H₂O₂ dissociation reaction schemes. The correlation between theory and the experiments is documented in numerical models of the catalytic reaction. The aim of the numerical models is to provide further information on the reaction kinetics and performance enhancement of the porous MnO₂ catalyst.},
  language  = {en}
}
@article{JildehOberlaenderKirchneretal.2018,
  author    = {Jildeh, Zaid B. and Oberl{\"a}nder, Jan and Kirchner, Patrick and Keusgen, Michael and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Experimental and Numerical Analyzes of a Sensor Based on Interdigitated Electrodes for Studying Microbiological Alterations},
  series = {physica status solidi (a): applications and materials science},
  volume    = {215},
  journal   = {physica status solidi (a): applications and materials science},
  number    = {15},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201700920},
  pages     = {Artikel 1700920},
  year      = {2018},
  abstract  = {In this work, a cell-based biosensor to evaluate the sterilization efficacy of hydrogen peroxide vapor sterilization processes is characterized. The transducer of the biosensor is based on interdigitated gold electrodes fabricated on an inert glass substrate. Impedance spectroscopy is applied to evaluate the sensor behavior and the alteration of test microorganisms due to the sterilization process. These alterations are related to changes in relative permittivity and electrical conductivity of the bacterial spores. Sensor measurements are conducted with and without bacterial spores (Bacillus atrophaeus), as well as after an industrial sterilization protocol. Equivalent two-dimensional numerical models based on finite element method of the periodic finger structures of the interdigitated gold electrodes are designed and validated using COMSOL® Multiphysics software by the application of known dielectric properties. The validated models are used to compute the electrical properties at different sensor states (blank, loaded with spores, and after sterilization). As a final result, we will derive and tabulate the frequency-dependent electrical parameters of the spore layer using a novel model that combines experimental data with numerical optimization techniques.},
  language  = {en}
}
@article{JildehKirchnerOberlaenderetal.2020,
  author    = {Jildeh, Zaid B. and Kirchner, Patrick and Oberl{\"a}nder, Jan and Vahidpour, Farnoosh and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Development of a package-sterilization process for aseptic filling machines: A numerical approach and validation for surface treatment with hydrogen peroxide},
  series = {Sensor and Actuators A: Physical},
  volume    = {303},
  journal   = {Sensor and Actuators A: Physical},
  number    = {111691},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-4247},
  doi       = {10.1016/j.sna.2019.111691},
  year      = {2020},
  abstract  = {Within the present work a sterilization process by a heated gas mixture that contains hydrogen peroxide (H₂O₂) is validated by experiments and numerical modeling techniques. The operational parameters that affect the sterilization efficacy are described alongside the two modes of sterilization: gaseous and condensed H₂O₂. Measurements with a previously developed H₂O₂ gas sensor are carried out to validate the applied H₂O₂ gas concentration during sterilization. We performed microbiological tests at different H₂O₂ gas concentrations by applying an end-point method to carrier strips, which contain different inoculation loads of Geobacillus stearothermophilus spores. The analysis of the sterilization process of a pharmaceutical glass vial is performed by numerical modeling. The numerical model combines heat- and advection-diffusion mass transfer with vapor-pressure equations to predict the location of condensate formation and the concentration of H₂O₂ at the packaging surfaces by changing the gas temperature. For a sterilization process of 0.7 s, a H₂O₂ gas concentration above 4\% v/v is required to reach a log-count reduction above six. The numerical results showed the location of H₂O₂ condensate formation, which decreases with increasing sterilant-gas temperature. The model can be transferred to different gas nozzle- and packaging geometries to assure the absence of H₂O₂ residues.},
  language  = {en}
}
@article{JildehKirchnerOberlaenderetal.2017,
  author    = {Jildeh, Zaid B. and Kirchner, Patrick and Oberl{\"a}nder, Jan and Kremers, Alexander and Wagner, Torsten and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {FEM-based modeling of a calorimetric gas sensor for hydrogen peroxide monitoring},
  series = {physica status solidi a : applications and materials sciences},
  journal   = {physica status solidi a : applications and materials sciences},
  number    = {Early View},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201600912},
  year      = {2017},
  abstract  = {A physically coupled finite element method (FEM) model is developed to study the response behavior of a calorimetric gas sensor. The modeled sensor serves as a monitoring device of the concentration of gaseous hydrogen peroxide (H2 O2) in a high temperature mixture stream in aseptic sterilization processes. The principle of operation of a calorimetric H2 O2 sensor is analyzed and the results of the numerical model have been validated by using previously published sensor experiments. The deviation in the results between the FEM model and experimental data are presented and discussed.},
  language  = {en}
}
@article{JildehKirchnerBaltesetal.2019,
  author    = {Jildeh, Zaid B. and Kirchner, Patrick and Baltes, Klaus and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Development of an in-line evaporation unit for the production of gas mixtures containing hydrogen peroxide - numerical modeling and experimental results},
  series = {International Journal of Heat and Mass Transfer},
  volume    = {143},
  journal   = {International Journal of Heat and Mass Transfer},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0017-9310},
  doi       = {10.1016/j.ijheatmasstransfer.2019.118519},
  pages     = {Article number 118519},
  year      = {2019},
  abstract  = {Hydrogen peroxide (H2O2) is a typical surface sterilization agent for packaging materials used in the pharmaceutical, food and beverage industries. We use the finite-elements method to analyze the conceptual design of an in-line thermal evaporation unit to produce a heated gas mixture of air and evaporated H2O2 solution. For the numerical model, the required phase-transition variables of pure H2O2 solution and of the aerosol mixture are acquired from vapor-liquid equilibrium (VLE) diagrams derived from vapor-pressure formulations. This work combines homogeneous single-phase turbulent flow with heat-transfer physics to describe the operation of the evaporation unit. We introduce the apparent heat-capacity concept to approximate the non-isothermal phase-transition process of the H2O2-containing aerosol. Empirical and analytical functions are defined to represent the temperature- and pressure-dependent material properties of the aqueous H2O2 solution, the aerosol and the gas mixture. To validate the numerical model, the simulation results are compared to experimental data on the heating power required to produce the gas mixture. This shows good agreement with the deviations below 10\%. Experimental observations on the formation of deposits due to the evaporation of stabilized H2O2 solution fits the prediction made from simulation results.},
  language  = {en}
}
@article{JerominZoor2008,
  author    = {Jeromin, G{\"u}nter Erich and Zoor, Annegreth},
  title     = {A new irreversible enzyme-aided esterification method in organic solvents},
  series = {Biotechnology letters. 30 (2008), H. 5},
  journal   = {Biotechnology letters. 30 (2008), H. 5},
  isbn      = {1573-6776},
  pages     = {925 -- 928},
  year      = {2008},
  language  = {en}
}
@article{JerominWelsch1995,
  author    = {Jeromin, G{\"u}nter Erich and Welsch, Volker},
  title     = {Diketene a New Esterification Reagent in the Enzyme-Aided Synthesis of Chiral Alcohols and Chiral Acetoacetic Acid Esters},
  series = {Tetrahedron Letters . 36 (1995), H. 37},
  journal   = {Tetrahedron Letters . 36 (1995), H. 37},
  isbn      = {0040-4039},
  pages     = {6663 -- 6664},
  year      = {1995},
  language  = {en}
}
@article{JerominWeise1990,
  author    = {Jeromin, G{\"u}nter Erich and Weise, Sven},
  title     = {Enzymatische Acetylierung von (±)-1-Phthalimido-2-propanol},
  series = {Liebigs Annalen der Chemie (1990)},
  journal   = {Liebigs Annalen der Chemie (1990)},
  isbn      = {0947-3440},
  pages     = {1045 -- 1046},
  year      = {1990},
  language  = {de}
}
@article{JerominScheidt1991,
  author    = {Jeromin, G{\"u}nter Erich and Scheidt, Annette},
  title     = {Aliphatic optically active alcohols by enzyme-aided synthesis},
  series = {Tetrahedron Letters . 32 (1991), H. 48},
  journal   = {Tetrahedron Letters . 32 (1991), H. 48},
  isbn      = {0040-4039},
  pages     = {7021 -- 7024},
  year      = {1991},
  language  = {en}
}
@article{JerominAlbertz1992,
  author    = {Jeromin, G{\"u}nter Erich and Albertz, Michael},
  title     = {Optically active \&\#945;-acetoxycarboxylic acids and \&\#945;-hydroxycarboxylic acids by enzyme-aided syntheses},
  series = {Journal f{\"u}r Praktische Chemie / Chemiker-Zeitung. 334 (1992), H. 6},
  journal   = {Journal f{\"u}r Praktische Chemie / Chemiker-Zeitung. 334 (1992), H. 6},
  isbn      = {1436-9966},
  pages     = {526 -- 528},
  year      = {1992},
  language  = {en}
}
@article{Jeromin2009,
  author    = {Jeromin, G{\"u}nter Erich},
  title     = {Superabsorbed alcohol dehydrogenase—a new catalyst for asymmetric reductions},
  series = {Biotechnology Letters. 31 (2009), H. 11},
  journal   = {Biotechnology Letters. 31 (2009), H. 11},
  isbn      = {0141-5492},
  pages     = {1717 -- 1721},
  year      = {2009},
  language  = {en}
}
@article{Jeromin2001,
  author    = {Jeromin, G{\"u}nter Erich},
  title     = {Tetrabenzo[a,c,h,j]phenoxazine-18-yl a new stable neutral radical},
  series = {Tetrahedron Letters . 42 (2001), H. 10},
  journal   = {Tetrahedron Letters . 42 (2001), H. 10},
  isbn      = {0040-4039},
  pages     = {1863 -- 1865},
  year      = {2001},
  language  = {en}
}
@article{JensKaldenhoffKirschnerHermannsetal.2014,
  author    = {Jens, Otto and Kaldenhoff, E. and Kirschner-Hermanns, R. and M{\"u}hl, Thomas and Klinge, Uwe},
  title     = {Elongation of textile pelvic floor implants under load is related to complete loss of effective porosity, thereby favoring incorporation in scar plates},
  series = {Journal of biomedical materials research. Part A},
  volume    = {102},
  journal   = {Journal of biomedical materials research. Part A},
  number    = {4},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1552-4965},
  doi       = {10.1002/jbm.a.34767},
  pages     = {1079 -- 1084},
  year      = {2014},
  abstract  = {Use of textile structures for reinforcement of pelvic floor structures has to consider mechanical forces to the implant, which are quite different to the tension free conditions of the abdominal wall. Thus, biomechanical analysis of textile devices has to include the impact of strain on stretchability and effective porosity. Prolift® and Prolift + M®, developed for tension free conditions, were tested by measuring stretchability and effective porosity applying mechanical strain. For comparison, we used Dynamesh-PR4®, which was designed for pelvic floor repair to withstand mechanical strain. Prolift® at rest showed moderate porosity with little stretchability but complete loss of effective porosity at strain of 4.9 N/cm. Prolift + M® revealed an increased porosity at rest, but at strain showed high stretchability, with subsequent loss of effective porosity at strain of 2.5 N/cm. Dynamesh PR4® preserved its high porosity even under strain, but as consequence of limited stretchability. Though in tension free conditions Prolift® and Prolift + M® can be considered as large pore class I meshes, application of mechanical strain rapidly lead to collapse of pores. The loss of porosity at mechanical stress can be prevented by constructions with high structural stability. Assessment of porosity under strain was found helpful to define requirements for pelvic floor devices. Clinical studies have to prove whether devices with high porosity as well as high structural stability can improve the patients' outcome.},
  language  = {en}
}
@article{JellinghausGoettscheHoffschmidt2006,
  author    = {Jellinghaus, Sabine and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard},
  title     = {Beleuchtung mit gesteuertem Farblicht - Bewertung eines Prototypen},
  series = {Zw{\"o}lftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 26./27. Januar 2006, Kloster Banz, Bad Staffelstein / OTTI - Training, Seminare, Tagungen. [Fachliche Gesamtleitung: Claus Steffan. Veranst.: OTTI, Bereich Erneuerbare Energien. Mitveranst.: Architektenkammer Baden-W{\"u}rttemberg, Stuttgart ...] / . - (Wissen f{\"u}r Profis)},
  journal   = {Zw{\"o}lftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 26./27. Januar 2006, Kloster Banz, Bad Staffelstein / OTTI - Training, Seminare, Tagungen. [Fachliche Gesamtleitung: Claus Steffan. Veranst.: OTTI, Bereich Erneuerbare Energien. Mitveranst.: Architektenkammer Baden-W{\"u}rttemberg, Stuttgart ...] / . - (Wissen f{\"u}r Profis)},
  publisher = {OTTI, Bereich Erneuerbare Energien},
  address   = {Regensburg},
  isbn      = {3-934681-43-3},
  pages     = {89 -- 93},
  year      = {2006},
  language  = {de}
}
@article{JayaramanMummidisettyLoeschetal.2019,
  author    = {Jayaraman, Chandrasekaran and Mummidisetty, Chaitanya Krishna and Loesch, Alexandra and Kaur, Sandi and Hoppe-Ludwig, Shenan and Staat, Manfred and Jayaraman, Arun},
  title     = {Postural and metabolic benefits of using a forearm support walker in older adults with impairments},
  series = {Archives of Physical Medicine and Rehabilitation},
  volume    = {Volume 100},
  journal   = {Archives of Physical Medicine and Rehabilitation},
  number    = {Issue 4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0003-9993},
  doi       = {10.1016/j.apmr.2018.10.001},
  pages     = {638 -- 647},
  year      = {2019},
  language  = {en}
}
@article{JanzVoss1999,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Dienstleistungsexport: Innovative Unternehmen sind exportst{\"a}rker / Janz, N. und k. Voß},
  year      = {1999},
  language  = {de}
}
@article{JanzVoss1999,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationen im Dienstleistungssektor: Gegens{\"a}tzliche Entwicklungen in den Branchen / Janz, N. und k. Voß},
  year      = {1999},
  language  = {de}
}
@article{JanzVoss1999,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationst{\"a}tigkeit im Verarbeitenden Gewerbe und Bergbau hat zugenommen / Janz, N. und k. Voß},
  year      = {1999},
  language  = {de}
}
@article{JanzVoss2001,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationen im Dienstleistungssektor: Rationalisierung steht nicht im Vordergrund / Janz, N. und K. Voß},
  year      = {2001},
  language  = {de}
}
@article{JanzVoss2001,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationsverhalten der deutschen Wirtschaft: Spitzenstellung bei Marktneuheiten / Janz, N. und K. Voß},
  year      = {2001},
  language  = {de}
}
@article{JanzVoss2000,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationen im verarbeitenden Gewerbe: Kleine und mittlere Unternehmen verschenken Gewinnchancen / Janz, N. und K. Voß},
  year      = {2000},
  language  = {de}
}
@article{JanzVoss2000,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationen im verarbeitenden Gewerbe: Ostdeutsche Unternehmen haben sich weitgehend angepaßt / Janz, N.},
  year      = {2000},
  language  = {de}
}
@article{JanzVoss2000,
  author    = {Janz, Norbert and Voß, K.},
  title     = {MIP-Nutzerkonferenz - Forschung mit dem Mannheimer Innovationspanel / Janz, N. und k. Voß},
  pages     = {4 -- 4},
  year      = {2000},
  language  = {de}
}
@article{JanzRoth1997,
  author    = {Janz, Norbert and Roth, M.},
  title     = {Innovationsreport Großhandel},
  series = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell. 4 (1997)},
  journal   = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell. 4 (1997)},
  isbn      = {0946-4689},
  pages     = {1 -- 2},
  year      = {1997},
  language  = {de}
}
@article{JanzLoeoefPeters2004,
  author    = {Janz, Norbert and L{\"o}{\"o}f, Hans and Peters, Bettina},
  title     = {Firm Level Innovation and Productivity, Is there a Common Story Across Countries?},
  series = {Problems and Perspectives in Management (2004)},
  journal   = {Problems and Perspectives in Management (2004)},
  isbn      = {ISSN 1727-7051},
  pages     = {184 -- 204},
  year      = {2004},
  language  = {en}
}
@article{JanzGottschalk2002,
  author    = {Janz, Norbert and Gottschalk, Sandra},
  title     = {Bestimmungsfaktoren der Innovationst{\"a}tigkeit / Gottschalk, S. und N. Janz},
  series = {Innovationsforschung heute : die Mannheimer Innovationspanels / Norbert Janz ; Georg Licht (Hrsg.)},
  journal   = {Innovationsforschung heute : die Mannheimer Innovationspanels / Norbert Janz ; Georg Licht (Hrsg.)},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  isbn      = {3-7890-8361-5},
  pages     = {17 -- 39},
  year      = {2002},
  language  = {de}
}
@article{JanzGottschalk2004,
  author    = {Janz, Norbert and Gottschalk, Sandra},
  title     = {Innovationst{\"a}tigkeit deutscher Unternehmen. Messung, Bestimmungs- und Erfolgsfaktoren / Janz, N. und S. Gottschalk},
  series = {Economia (2004)},
  journal   = {Economia (2004)},
  pages     = {19 -- 29},
  year      = {2004},
  language  = {de}
}
@article{JanzGoedhuysMohnen2008,
  author    = {Janz, Norbert and Goedhuys, Micheline and Mohnen, Pierre},
  title     = {What drives productivity in Tanzanian manufacturing firms: technology or business environment? / Goedhuys, Micheline ; Janz, Norbert ; Mohnen, Pierre},
  series = {The European Journal of Development Research. 20 (2008), H. 2},
  journal   = {The European Journal of Development Research. 20 (2008), H. 2},
  isbn      = {1743-9728},
  pages     = {199 -- 218},
  year      = {2008},
  language  = {en}
}
@article{JanzGoedhuysMairesseetal.2008,
  author    = {Janz, Norbert and Goedhuys, Micheline and Mairesse, Jacques and Mohnen, Pierre},
  title     = {Micro-evidence on innovation and development (MEIDE): an introduction / Goedhuys, Micheline ; Janz, Norbert ; Mairesse, Jacques ; Mohnen, Pierre},
  series = {The European Journal of Development Research. 20 (2008), H. 2},
  journal   = {The European Journal of Development Research. 20 (2008), H. 2},
  isbn      = {1743-9728},
  pages     = {167 -- 171},
  year      = {2008},
  language  = {en}
}
@article{JanzEblingHippetal.1999,
  author    = {Janz, Norbert and Ebling, G{\"u}nther and Hipp, C. and Licht, Georg},
  title     = {Innovationsaktivit{\"a}ten im Dienstleistungssektor: Ergebnis der Innovationserhebung 1997 / Ebling, G., C. Hipp, N. Janz, G. Licht und H. Niggemann},
  series = {Innovationsaktivit{\"a}ten in der deutschen Wirtschaft : Analyse der Mannheimer Innovationspanels im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz ... (Hrsg.)},
  journal   = {Innovationsaktivit{\"a}ten in der deutschen Wirtschaft : Analyse der Mannheimer Innovationspanels im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz ... (Hrsg.)},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  isbn      = {3-7890-6179-4},
  pages     = {99 -- 222},
  year      = {1999},
  language  = {de}
}
@article{JanzEblingGottschalketal.2002,
  author    = {Janz, Norbert and Ebling, G{\"u}nther and Gottschalk, Sandra and Peters, Bettina},
  title     = {Die Mannheimer Innovationspanels / Janz, N., G. Ebling, S. Gottschalk und B. Peters},
  series = {Allgemeines Statistisches Archiv. 86 (2002)},
  journal   = {Allgemeines Statistisches Archiv. 86 (2002)},
  isbn      = {0002-6018},
  pages     = {189 -- 202},
  year      = {2002},
  language  = {de}
}
@article{JanzEblingGottschalketal.2001,
  author    = {Janz, Norbert and Ebling, G{\"u}nther and Gottschalk, Sandra and Niggemann, Hiltrud},
  title     = {The Mannheim Innovation Panels (MIP and MIP-S) of the Centre for European Economic Research (ZEW) / Janz, N., G. Ebling, S. Gottschalk und H. Niggemann},
  series = {Schmollers Jahrbuch : Zeitschrift f{\"u}r Wirtschafts- und Sozialwissenschaften ; journal of applied social science studies. 121 (2001)},
  journal   = {Schmollers Jahrbuch : Zeitschrift f{\"u}r Wirtschafts- und Sozialwissenschaften ; journal of applied social science studies. 121 (2001)},
  isbn      = {0342-1783},
  pages     = {123 -- 129},
  year      = {2001},
  language  = {en}
}
@article{JanzCzarnitzkiEbelingetal.2000,
  author    = {Janz, Norbert and Czarnitzki, Dirk and Ebeling, G{\"u}nther and Gottschalk, Sandra},
  title     = {Quellen f{\"u}r Innovationen im Verarbeitenden Gewerbe und im Bergbau / Czarnitzki, D., G. Ebling, S. Gottschalk, N. Janz und H. Niggemann},
  series = {Quellen f{\"u}r Innovationen : Analyse der ZEW-Innovationserhebungen 1999 im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz (Hrsg.)},
  journal   = {Quellen f{\"u}r Innovationen : Analyse der ZEW-Innovationserhebungen 1999 im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz (Hrsg.)},
  publisher = {ZEW},
  address   = {Mannheim},
  pages     = {1 -- 26},
  year      = {2000},
  language  = {de}
}