@article{KalbeKuropkaMeyerStorketal.1988,
  author    = {Kalbe, Jochen and Kuropka, Rolf and Meyer-Stork, L. Sebastian and Berndt, Heinz and Sauter, Sybille L. and Loss, Peter and Hendo, Karsten and Riesner, Detlev and H{\"o}cker, Hartwig},
  title     = {Isolation and characterization of high-molecular mass DNA from hair shafts},
  series = {Biological chemistry},
  volume    = {369},
  journal   = {Biological chemistry},
  number    = {1},
  isbn      = {0177-3593},
  doi       = {10.1515/bchm3.1988.369.1.413},
  pages     = {413 -- 416},
  year      = {1988},
  language  = {en}
}
@article{KalbeHoeckerBerndt1989,
  author    = {Kalbe, Jochen and H{\"o}cker, Hartwig and Berndt, Heinz},
  title     = {Design of enzyme reactors as chromatographic columns for racemic resolution of amino acid esters},
  series = {Chromatographia},
  volume    = {28},
  journal   = {Chromatographia},
  number    = {3-4},
  isbn      = {0009-5893},
  doi       = {10.1007/BF02319646},
  pages     = {193 -- 196},
  year      = {1989},
  language  = {en}
}
@article{KahmannRauschPluemeretal.2022,
  author    = {Kahmann, Stephanie L. and Rausch, Valentin and Pl{\"u}mer, Jonathan and M{\"u}ller, Lars P. and Pieper, Martin and Wegmann, Kilian},
  title     = {The automized fracture edge detection and generation of three-dimensional fracture probability heat maps},
  series = {Medical Engineering \& Physics},
  volume    = {2022},
  journal   = {Medical Engineering \& Physics},
  number    = {110},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1350-4533},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {With proven impact of statistical fracture analysis on fracture classifications, it is desirable to minimize the manual work and to maximize repeatability of this approach. We address this with an algorithm that reduces the manual effort to segmentation, fragment identification and reduction. The fracture edge detection and heat map generation are performed automatically. With the same input, the algorithm always delivers the same output. The tool transforms one intact template consecutively onto each fractured specimen by linear least square optimization, detects the fragment edges in the template and then superimposes them to generate a fracture probability heat map. We hypothesized that the algorithm runs faster than the manual evaluation and with low (< 5 mm) deviation. We tested the hypothesis in 10 fractured proximal humeri and found that it performs with good accuracy (2.5 mm ± 2.4 mm averaged Euclidean distance) and speed (23 times faster). When applied to a distal humerus, a tibia plateau, and a scaphoid fracture, the run times were low (1-2 min), and the detected edges correct by visual judgement. In the geometrically complex acetabulum, at a run time of 78 min some outliers were considered acceptable. An automatically generated fracture probability heat map based on 50 proximal humerus fractures matches the areas of high risk of fracture reported in medical literature. Such automation of the fracture analysis method is advantageous and could be extended to reduce the manual effort even further.},
  language  = {en}
}
@article{JoerissenHeger2014,
  author    = {J{\"o}rissen, J{\"o}rg and Heger, Michael},
  title     = {Zur Wirkung hochschuldidaktisch fundierter und in den Fachbereichen verankerter Lehrveranstaltungsevaluation},
  series = {Qualit{\"a}t in der Wissenschaft (QiW)},
  volume    = {8},
  journal   = {Qualit{\"a}t in der Wissenschaft (QiW)},
  number    = {2+3},
  publisher = {Universit{\"a}tsverlag Webler},
  address   = {Bielefeld},
  issn      = {1860-3041},
  pages     = {70 -- 80},
  year      = {2014},
  language  = {de}
}
@article{JungbluthBorchert2008,
  author    = {Jungbluth, Christian and Borchert, J{\"o}rg},
  title     = {M{\"o}glichkeiten der Strompreisbeeinflussung im oligopolistischen Markt},
  series = {ZNER Zeitschrift f{\"u}r Neues Energierecht},
  journal   = {ZNER Zeitschrift f{\"u}r Neues Energierecht},
  number    = {4},
  pages     = {314 -- 323},
  year      = {2008},
  language  = {de}
}
@article{JungStaatMueller2018,
  author    = {Jung, Alexander and Staat, Manfred and M{\"u}ller, Wolfram},
  title     = {Corrigendum to "Flight style optimization in ski jumping on normal, large, and ski flying hills" [J. Biomech 47 (2014) 716-722]},
  series = {Journals of Biomechanics},
  journal   = {Journals of Biomechanics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2018.02.001},
  pages     = {313},
  year      = {2018},
  language  = {en}
}
@article{JungStaatMueller2013,
  author    = {Jung, Alexander and Staat, Manfred and M{\"u}ller, Wolfram},
  title     = {Flight style optimization in ski jumping on normal, large, and ski flying hills},
  series = {Journal of biomechanics},
  volume    = {Vol. 47},
  journal   = {Journal of biomechanics},
  number    = {Iss. 3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2380 (E-Journal); 0021-9290 (Print)},
  pages     = {716 -- 722},
  year      = {2013},
  language  = {en}
}
@article{JungStaat2020,
  author    = {Jung, Alexander and Staat, Manfred},
  title     = {Erratum to "Modeling and simulation of human induced pluripotent stem cell-derived cardiac tissue" [GAMM-Mitteilungen, (2019), 42, 4, 10.1002/gamm.201900002]},
  series = {GAMM-Mitteilungen},
  volume    = {43},
  journal   = {GAMM-Mitteilungen},
  number    = {4},
  publisher = {Wiley-VCH GmbH},
  address   = {Weinheim},
  issn      = {1522-2608},
  doi       = {10.1002/gamm.202000011},
  year      = {2020},
  language  = {en}
}
@article{JungStaat2019,
  author    = {Jung, Alexander and Staat, Manfred},
  title     = {Modeling and simulation of human induced pluripotent stem cell-derived cardiac tissue},
  series = {GAMM - Mitteilungen der Gesellschaft f{\"u}r Angewandte Mathematik und Mechanik},
  volume    = {42},
  journal   = {GAMM - Mitteilungen der Gesellschaft f{\"u}r Angewandte Mathematik und Mechanik},
  number    = {4},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1522-2608},
  doi       = {10.1002/gamm.201900002},
  pages     = {11 Seiten},
  year      = {2019},
  language  = {en}
}
@article{JungMuellerStaat2018,
  author    = {Jung, Alexander and M{\"u}ller, Wolfram and Staat, Manfred},
  title     = {Wind and fairness in ski jumping: A computer modelling analysis},
  series = {Journal of Biomechanics},
  journal   = {Journal of Biomechanics},
  number    = {75},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2018.05.001},
  pages     = {147 -- 153},
  year      = {2018},
  abstract  = {Wind is closely associated with the discussion of fairness in ski jumping. To counter-act its influence on the jump length, the International Ski Federation (FIS) has introduced a wind compensation approach. We applied three differently accurate computer models of the flight phase with wind (M1, M2, and M3) to study the jump length effects of various wind scenarios. The previously used model M1 is accurate for wind blowing in direction of the flight path, but inaccuracies are to be expected for wind directions deviating from the tangent to the flight path. M2 considers the change of airflow direction, but it does not consider the associated change in the angle of attack of the skis which additionally modifies drag and lift area time functions. M3 predicts the length effect for all wind directions within the plane of the flight trajectory without any mathematical simplification. Prediction errors of M3 are determined only by the quality of the input data: wind velocity, drag and lift area functions, take-off velocity, and weight. For comparing the three models, drag and lift area functions of an optimized reference jump were used. Results obtained with M2, which is much easier to handle than M3, did not deviate noticeably when compared to predictions of the reference model M3. Therefore, we suggest to use M2 in future applications. A comparison of M2 predictions with the FIS wind compensation system showed substantial discrepancies, for instance: in the first flight phase, tailwind can increase jump length, and headwind can decrease it; this is opposite of what had been anticipated before and is not considered in the current wind compensation system in ski jumping.},
  language  = {en}
}
@article{JungMuellerStaat2019,
  author    = {Jung, Alexander and M{\"u}ller, Wolfram and Staat, Manfred},
  title     = {Optimization of the flight technique in ski jumping: the influence of wind},
  number    = {Early view},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.jbiomech.2019.03.023},
  year      = {2019},
  language  = {en}
}
@article{JossekBongaertsSprenger2001,
  author    = {Jossek, Ralf and Bongaerts, Johannes and Sprenger, Georg A.},
  title     = {Characterization of a new feedback-resistant 3-deoxy-D-arabinoheptulosonate 7-phosphate synthase AroF of Escherichia coli},
  series = {FEMS microbiology letters},
  volume    = {Vol. 202},
  journal   = {FEMS microbiology letters},
  number    = {Iss. 1},
  issn      = {1574-6968},
  pages     = {145 -- 148},
  year      = {2001},
  language  = {en}
}
@article{JordanKruegerWillmesetal.2011,
  author    = {Jordan, Sabine D. and Kr{\"u}ger, Markus and Willmes, Diana M. and Redemann, Nora and Wunderlich, F. Thomas and Br{\"o}nneke, Hella S. and Merkwirth, Carsten and Kashkar, Hamid and Olkkonen, Vesa M. and B{\"o}ttger, Thomas and Braun, Thomas and Seibler, Jost and Br{\"u}ning, Jens C.},
  title     = {Obesity-induced overexpression of miRNA-143 inhibits insulin-stimulated AKT activation and impairs glucose metabolism},
  series = {Nature Cell Biology},
  volume    = {13},
  journal   = {Nature Cell Biology},
  number    = {4},
  publisher = {Nature},
  address   = {New York},
  issn      = {1465-7392},
  doi       = {10.1038/ncb2211},
  pages     = {434 -- 446},
  year      = {2011},
  abstract  = {The contribution of altered post-transcriptional gene silencing to the development of insulin resistance and type 2 diabetes mellitus so far remains elusive. Here, we demonstrate that expression of microRNA (miR)-143 and 145 is upregulated in the liver of genetic and dietary mouse models of obesity. Induced transgenic overexpression of miR-143, but not miR-145, impairs insulin-stimulated AKT activation and glucose homeostasis. Conversely, mice deficient for the miR-143-145 cluster are protected from the development of obesity-associated insulin resistance. Quantitative-mass-spectrometry-based analysis of hepatic protein expression in miR-143-overexpressing mice revealed miR-143-dependent downregulation of oxysterol-binding-protein-related protein (ORP) 8. Reduced ORP8 expression in cultured liver cells impairs the ability of insulin to induce AKT activation, revealing an ORP8-dependent mechanism of AKT regulation. Our experiments provide direct evidence that dysregulated post-transcriptional gene silencing contributes to the development of obesity-induced insulin resistance, and characterize the miR-143-ORP8 pathway as a potential target for the treatment of obesity-associated diabetes.},
  language  = {en}
}
@article{JochimMenzel2018,
  author    = {Jochim, Haldor E. and Menzel, Christoph J.},
  title     = {Die Trassenb{\"u}ndelung als Planungsmethode nachhaltiger Verkehrspolitik},
  series = {Der Eisenbahningenieur : EI},
  volume    = {69},
  journal   = {Der Eisenbahningenieur : EI},
  number    = {11},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2810},
  pages     = {26 -- 31},
  year      = {2018},
  language  = {de}
}
@article{JochimMenzel2006,
  author    = {Jochim, Haldor E. and Menzel, Christoph},
  title     = {Ist der Bachelor des Diplom-Ingenieurs Untergang? Chancen, Risiken und Perspektiven des neuen Studiensystems},
  series = {EI - Eisenbahningenieur. 57 (2006), H. 7},
  journal   = {EI - Eisenbahningenieur. 57 (2006), H. 7},
  isbn      = {0013-2810},
  pages     = {52 -- 56},
  year      = {2006},
  language  = {de}
}
@article{Jochim2000,
  author    = {Jochim, Haldor E.},
  title     = {Verkehrswirtschaftliche Ermittlung von Qualit{\"a}tsmaßst{\"a}ben im Eisenbahnbetrieb},
  series = {Der Eisenbahningenieur : Elektronische Ressource : EI / Verband Deutscher Eisenbahn-Ingenieure e.V. (VDEI). 51 (2000), H. 7},
  journal   = {Der Eisenbahningenieur : Elektronische Ressource : EI / Verband Deutscher Eisenbahn-Ingenieure e.V. (VDEI). 51 (2000), H. 7},
  isbn      = {0013-2810},
  pages     = {5 -- 8},
  year      = {2000},
  language  = {de}
}
@article{Jochim1996,
  author    = {Jochim, Haldor E.},
  title     = {Versp{\"a}tungsbewertung im Schienenpersonenfernverkehr in Deutschland},
  series = {Doprava a kvalita II : zborn{\´i}k = Verkehr und Qualit{\"a}t II / 4. Medzin{\´a}rodn{\´e} Vedeck{\´e} Dopravn{\´e} Kolokvium EIPOS, Žilina, 19. - 21.9.1996. Eur{\´o}psky Inštit{\´u}t pre Postgradu{\´a}lne Vzdel{\´a}vanie TU Dr{\´a}ž\&\#271;any ... [Zost. František Schlosser]},
  journal   = {Doprava a kvalita II : zborn{\´i}k = Verkehr und Qualit{\"a}t II / 4. Medzin{\´a}rodn{\´e} Vedeck{\´e} Dopravn{\´e} Kolokvium EIPOS, Žilina, 19. - 21.9.1996. Eur{\´o}psky Inštit{\´u}t pre Postgradu{\´a}lne Vzdel{\´a}vanie TU Dr{\´a}ž\&\#271;any ... [Zost. František Schlosser]},
  publisher = {Vysok{\´a} Škola Dopravy a Spojov},
  address   = {Žilina},
  pages     = {203 S : graph. Darst},
  year      = {1996},
  language  = {de}
}
@article{Jochim2000,
  author    = {Jochim, Haldor E.},
  title     = {Verkehrswirtschaftliche Ermittlung von Qualit{\"a}tsmaßst{\"a}ben im Eisenbahnbetrieb},
  series = {Eisenbahntechnische Rundschau : ETR ; Zeitschrift f{\"u}r die gesamte Eisenbahntechnik. 49 (2000), H. 6},
  journal   = {Eisenbahntechnische Rundschau : ETR ; Zeitschrift f{\"u}r die gesamte Eisenbahntechnik. 49 (2000), H. 6},
  year      = {2000},
  language  = {de}
}
@article{Jochim2001,
  author    = {Jochim, Haldor E.},
  title     = {Die Kapazit{\"a}t von Engpassstrecken der Eisenbahn bei der Trennung von Netz und Betrieb},
  series = {Verkehrswissenschaftliche Tage der Hochschule f{\"u}r Verkehrswesen "Friedrich List" in Dresden / Technische Universit{\"a}t Dresden, Fakult{\"a}t Verkehrswissenschaften},
  journal   = {Verkehrswissenschaftliche Tage der Hochschule f{\"u}r Verkehrswesen "Friedrich List" in Dresden / Technische Universit{\"a}t Dresden, Fakult{\"a}t Verkehrswissenschaften},
  year      = {2001},
  language  = {de}
}
@article{Jochim2003,
  author    = {Jochim, Haldor E.},
  title     = {Wieviel d{\"u}rfen Versp{\"a}tungsgarantien kosten?},
  series = {Verkehrswissenschaftliche Tage der Hochschule f{\"u}r Verkehrswesen "Friedrich List" in Dresden / Technische Universit{\"a}t Dresden, Fakult{\"a}t Verkehrswissenschaften},
  journal   = {Verkehrswissenschaftliche Tage der Hochschule f{\"u}r Verkehrswesen "Friedrich List" in Dresden / Technische Universit{\"a}t Dresden, Fakult{\"a}t Verkehrswissenschaften},
  year      = {2003},
  language  = {de}
}
@article{Jochim2002,
  author    = {Jochim, Haldor E.},
  title     = {Charging rail operators for delays - how not to do it},
  series = {Networks for mobility : International Symposium, September 18 - 20, 2002, Stuttgart, Germany ; proceedings / University of Stuttgart, Centre of Transporation Research (FOVUS). W. M{\"o}hlenbrink ... (eds.)},
  journal   = {Networks for mobility : International Symposium, September 18 - 20, 2002, Stuttgart, Germany ; proceedings / University of Stuttgart, Centre of Transporation Research (FOVUS). W. M{\"o}hlenbrink ... (eds.)},
  publisher = {FOVUS},
  address   = {Stuttgart},
  isbn      = {3893010858},
  year      = {2002},
  language  = {en}
}
@article{Jochim2004,
  author    = {Jochim, Haldor E.},
  title     = {A traffic resistance model of long-distance travel},
  series = {Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of},
  journal   = {Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of},
  publisher = {FOVUS},
  address   = {Stuttgart},
  isbn      = {3-89301-180-3},
  pages     = {X, 84 S. : graph. Darst. + 1 CD-ROM},
  year      = {2004},
  language  = {en}
}
@article{Jochim2006,
  author    = {Jochim, Haldor E.},
  title     = {Warum Ingenieure nicht rechnen und Controller nicht sch{\"a}tzen k{\"o}nnen},
  series = {EI - Eisenbahningenieur. 57 (2006), H. 1},
  journal   = {EI - Eisenbahningenieur. 57 (2006), H. 1},
  isbn      = {0013-2810},
  pages     = {54 -- 56},
  year      = {2006},
  language  = {de}
}
@article{Jochim2005,
  author    = {Jochim, Haldor E.},
  title     = {Versp{\"a}tungen auf Stammstrecken - wie man sie (nicht) in den Griff bekommt},
  series = {Der Nahverkehr. 23 (2005), H. 6},
  journal   = {Der Nahverkehr. 23 (2005), H. 6},
  isbn      = {0722-8287},
  year      = {2005},
  language  = {de}
}
@article{Jochim2007,
  author    = {Jochim, Haldor E.},
  title     = {Versp{\"a}tungsentsch{\"a}digungen der Bahnen. Verkehrswirtschaftliche Anmerkungen zum Regierungsgutachten "Verbraucherschutz und Kundenrechte im {\"o}ffentlichen Personenverkehr".},
  series = {Internationales Verkehrswesen. 59 (2007), H. 3},
  journal   = {Internationales Verkehrswesen. 59 (2007), H. 3},
  isbn      = {0020-9511},
  pages     = {95 -- 99},
  year      = {2007},
  language  = {de}
}
@article{Jochim2012,
  author    = {Jochim, Haldor E.},
  title     = {Die Ostheidebahn - eine Alternative zur Y-Trasse},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {61},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {11},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {34 -- 37},
  year      = {2012},
  language  = {de}
}
@article{Jochim2007,
  author    = {Jochim, Haldor E.},
  title     = {Beurteilung der Ausbaunotwendigkeit von Eisenbahn-Streckenabschnitten - ein anspruchsloses Verfahren},
  series = {Eisenbahn-Ingenieur-Kalender 2008 : EIK ; Jahrbuch f{\"u}r Schienenverkehr \& Technik / Hrsg. Verband Deutscher Eisenbahn-Ingenieure e.V., VDEI},
  journal   = {Eisenbahn-Ingenieur-Kalender 2008 : EIK ; Jahrbuch f{\"u}r Schienenverkehr \& Technik / Hrsg. Verband Deutscher Eisenbahn-Ingenieure e.V., VDEI},
  isbn      = {0934-5930},
  pages     = {333 -- 342},
  year      = {2007},
  language  = {de}
}
@article{JiminezGermanBehbahaniMiettinenetal.2013,
  author    = {Jiminez German, Salvador and Behbahani, Mehdi and Miettinen, Susanna and Grijpma, Dirk W. and Haimi, Suvi P.},
  title     = {Proliferation and differentiation of adipose stem cells towards smooth muscle cells on poly(trimethylene carbonate) membranes},
  series = {Macromolecular symposia},
  volume    = {Vol. 334},
  journal   = {Macromolecular symposia},
  number    = {Iss. 1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {0258-0322},
  pages     = {133 -- 142},
  year      = {2013},
  language  = {en}
}
@article{JildehWagnerSchoeningetal.2015,
  author    = {Jildeh, Zaid B. and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Pieper, Martin},
  title     = {Simulating the electromagnetic-thermal treatment of thin aluminium layers for adhesion improvement},
  series = {Physica status solidi (a)},
  volume    = {Vol. 212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431893},
  pages     = {1234 -- 1241},
  year      = {2015},
  abstract  = {A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed.},
  language  = {en}
}
@article{JildehOberlaenderKirchneretal.2018,
  author    = {Jildeh, Zaid B. and Oberl{\"a}nder, Jan and Kirchner, Patrick and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Thermocatalytic Behavior of Manganese (IV) Oxide as Nanoporous Material on the Dissociation of a Gas Mixture Containing Hydrogen Peroxide},
  series = {Nanomaterials},
  volume    = {8},
  journal   = {Nanomaterials},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-4991},
  doi       = {10.3390/nano8040262},
  pages     = {Artikel 262},
  year      = {2018},
  abstract  = {In this article, we present an overview on the thermocatalytic reaction of hydrogen peroxide (H₂O₂) gas on a manganese (IV) oxide (MnO₂) catalytic structure. The principle of operation and manufacturing techniques are introduced for a calorimetric H₂O₂ gas sensor based on porous MnO₂. Results from surface analyses by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) of the catalytic material provide indication of the H₂O₂ dissociation reaction schemes. The correlation between theory and the experiments is documented in numerical models of the catalytic reaction. The aim of the numerical models is to provide further information on the reaction kinetics and performance enhancement of the porous MnO₂ catalyst.},
  language  = {en}
}
@article{JildehOberlaenderKirchneretal.2018,
  author    = {Jildeh, Zaid B. and Oberl{\"a}nder, Jan and Kirchner, Patrick and Keusgen, Michael and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Experimental and Numerical Analyzes of a Sensor Based on Interdigitated Electrodes for Studying Microbiological Alterations},
  series = {physica status solidi (a): applications and materials science},
  volume    = {215},
  journal   = {physica status solidi (a): applications and materials science},
  number    = {15},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201700920},
  pages     = {Artikel 1700920},
  year      = {2018},
  abstract  = {In this work, a cell-based biosensor to evaluate the sterilization efficacy of hydrogen peroxide vapor sterilization processes is characterized. The transducer of the biosensor is based on interdigitated gold electrodes fabricated on an inert glass substrate. Impedance spectroscopy is applied to evaluate the sensor behavior and the alteration of test microorganisms due to the sterilization process. These alterations are related to changes in relative permittivity and electrical conductivity of the bacterial spores. Sensor measurements are conducted with and without bacterial spores (Bacillus atrophaeus), as well as after an industrial sterilization protocol. Equivalent two-dimensional numerical models based on finite element method of the periodic finger structures of the interdigitated gold electrodes are designed and validated using COMSOL® Multiphysics software by the application of known dielectric properties. The validated models are used to compute the electrical properties at different sensor states (blank, loaded with spores, and after sterilization). As a final result, we will derive and tabulate the frequency-dependent electrical parameters of the spore layer using a novel model that combines experimental data with numerical optimization techniques.},
  language  = {en}
}
@article{JildehKirchnerOberlaenderetal.2020,
  author    = {Jildeh, Zaid B. and Kirchner, Patrick and Oberl{\"a}nder, Jan and Vahidpour, Farnoosh and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Development of a package-sterilization process for aseptic filling machines: A numerical approach and validation for surface treatment with hydrogen peroxide},
  series = {Sensor and Actuators A: Physical},
  volume    = {303},
  journal   = {Sensor and Actuators A: Physical},
  number    = {111691},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-4247},
  doi       = {10.1016/j.sna.2019.111691},
  year      = {2020},
  abstract  = {Within the present work a sterilization process by a heated gas mixture that contains hydrogen peroxide (H₂O₂) is validated by experiments and numerical modeling techniques. The operational parameters that affect the sterilization efficacy are described alongside the two modes of sterilization: gaseous and condensed H₂O₂. Measurements with a previously developed H₂O₂ gas sensor are carried out to validate the applied H₂O₂ gas concentration during sterilization. We performed microbiological tests at different H₂O₂ gas concentrations by applying an end-point method to carrier strips, which contain different inoculation loads of Geobacillus stearothermophilus spores. The analysis of the sterilization process of a pharmaceutical glass vial is performed by numerical modeling. The numerical model combines heat- and advection-diffusion mass transfer with vapor-pressure equations to predict the location of condensate formation and the concentration of H₂O₂ at the packaging surfaces by changing the gas temperature. For a sterilization process of 0.7 s, a H₂O₂ gas concentration above 4\% v/v is required to reach a log-count reduction above six. The numerical results showed the location of H₂O₂ condensate formation, which decreases with increasing sterilant-gas temperature. The model can be transferred to different gas nozzle- and packaging geometries to assure the absence of H₂O₂ residues.},
  language  = {en}
}
@article{JildehKirchnerOberlaenderetal.2017,
  author    = {Jildeh, Zaid B. and Kirchner, Patrick and Oberl{\"a}nder, Jan and Kremers, Alexander and Wagner, Torsten and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {FEM-based modeling of a calorimetric gas sensor for hydrogen peroxide monitoring},
  series = {physica status solidi a : applications and materials sciences},
  journal   = {physica status solidi a : applications and materials sciences},
  number    = {Early View},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201600912},
  year      = {2017},
  abstract  = {A physically coupled finite element method (FEM) model is developed to study the response behavior of a calorimetric gas sensor. The modeled sensor serves as a monitoring device of the concentration of gaseous hydrogen peroxide (H2 O2) in a high temperature mixture stream in aseptic sterilization processes. The principle of operation of a calorimetric H2 O2 sensor is analyzed and the results of the numerical model have been validated by using previously published sensor experiments. The deviation in the results between the FEM model and experimental data are presented and discussed.},
  language  = {en}
}
@article{JildehKirchnerBaltesetal.2019,
  author    = {Jildeh, Zaid B. and Kirchner, Patrick and Baltes, Klaus and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Development of an in-line evaporation unit for the production of gas mixtures containing hydrogen peroxide - numerical modeling and experimental results},
  series = {International Journal of Heat and Mass Transfer},
  volume    = {143},
  journal   = {International Journal of Heat and Mass Transfer},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0017-9310},
  doi       = {10.1016/j.ijheatmasstransfer.2019.118519},
  pages     = {Article number 118519},
  year      = {2019},
  abstract  = {Hydrogen peroxide (H2O2) is a typical surface sterilization agent for packaging materials used in the pharmaceutical, food and beverage industries. We use the finite-elements method to analyze the conceptual design of an in-line thermal evaporation unit to produce a heated gas mixture of air and evaporated H2O2 solution. For the numerical model, the required phase-transition variables of pure H2O2 solution and of the aerosol mixture are acquired from vapor-liquid equilibrium (VLE) diagrams derived from vapor-pressure formulations. This work combines homogeneous single-phase turbulent flow with heat-transfer physics to describe the operation of the evaporation unit. We introduce the apparent heat-capacity concept to approximate the non-isothermal phase-transition process of the H2O2-containing aerosol. Empirical and analytical functions are defined to represent the temperature- and pressure-dependent material properties of the aqueous H2O2 solution, the aerosol and the gas mixture. To validate the numerical model, the simulation results are compared to experimental data on the heating power required to produce the gas mixture. This shows good agreement with the deviations below 10\%. Experimental observations on the formation of deposits due to the evaporation of stabilized H2O2 solution fits the prediction made from simulation results.},
  language  = {en}
}
@article{JerominZoor2008,
  author    = {Jeromin, G{\"u}nter Erich and Zoor, Annegreth},
  title     = {A new irreversible enzyme-aided esterification method in organic solvents},
  series = {Biotechnology letters. 30 (2008), H. 5},
  journal   = {Biotechnology letters. 30 (2008), H. 5},
  isbn      = {1573-6776},
  pages     = {925 -- 928},
  year      = {2008},
  language  = {en}
}
@article{JerominWelsch1995,
  author    = {Jeromin, G{\"u}nter Erich and Welsch, Volker},
  title     = {Diketene a New Esterification Reagent in the Enzyme-Aided Synthesis of Chiral Alcohols and Chiral Acetoacetic Acid Esters},
  series = {Tetrahedron Letters . 36 (1995), H. 37},
  journal   = {Tetrahedron Letters . 36 (1995), H. 37},
  isbn      = {0040-4039},
  pages     = {6663 -- 6664},
  year      = {1995},
  language  = {en}
}
@article{JerominWeise1990,
  author    = {Jeromin, G{\"u}nter Erich and Weise, Sven},
  title     = {Enzymatische Acetylierung von (±)-1-Phthalimido-2-propanol},
  series = {Liebigs Annalen der Chemie (1990)},
  journal   = {Liebigs Annalen der Chemie (1990)},
  isbn      = {0947-3440},
  pages     = {1045 -- 1046},
  year      = {1990},
  language  = {de}
}
@article{JerominScheidt1991,
  author    = {Jeromin, G{\"u}nter Erich and Scheidt, Annette},
  title     = {Aliphatic optically active alcohols by enzyme-aided synthesis},
  series = {Tetrahedron Letters . 32 (1991), H. 48},
  journal   = {Tetrahedron Letters . 32 (1991), H. 48},
  isbn      = {0040-4039},
  pages     = {7021 -- 7024},
  year      = {1991},
  language  = {en}
}
@article{JerominAlbertz1992,
  author    = {Jeromin, G{\"u}nter Erich and Albertz, Michael},
  title     = {Optically active \&\#945;-acetoxycarboxylic acids and \&\#945;-hydroxycarboxylic acids by enzyme-aided syntheses},
  series = {Journal f{\"u}r Praktische Chemie / Chemiker-Zeitung. 334 (1992), H. 6},
  journal   = {Journal f{\"u}r Praktische Chemie / Chemiker-Zeitung. 334 (1992), H. 6},
  isbn      = {1436-9966},
  pages     = {526 -- 528},
  year      = {1992},
  language  = {en}
}
@article{Jeromin2009,
  author    = {Jeromin, G{\"u}nter Erich},
  title     = {Superabsorbed alcohol dehydrogenase—a new catalyst for asymmetric reductions},
  series = {Biotechnology Letters. 31 (2009), H. 11},
  journal   = {Biotechnology Letters. 31 (2009), H. 11},
  isbn      = {0141-5492},
  pages     = {1717 -- 1721},
  year      = {2009},
  language  = {en}
}
@article{Jeromin2001,
  author    = {Jeromin, G{\"u}nter Erich},
  title     = {Tetrabenzo[a,c,h,j]phenoxazine-18-yl a new stable neutral radical},
  series = {Tetrahedron Letters . 42 (2001), H. 10},
  journal   = {Tetrahedron Letters . 42 (2001), H. 10},
  isbn      = {0040-4039},
  pages     = {1863 -- 1865},
  year      = {2001},
  language  = {en}
}
@article{JensKaldenhoffKirschnerHermannsetal.2014,
  author    = {Jens, Otto and Kaldenhoff, E. and Kirschner-Hermanns, R. and M{\"u}hl, Thomas and Klinge, Uwe},
  title     = {Elongation of textile pelvic floor implants under load is related to complete loss of effective porosity, thereby favoring incorporation in scar plates},
  series = {Journal of biomedical materials research. Part A},
  volume    = {102},
  journal   = {Journal of biomedical materials research. Part A},
  number    = {4},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1552-4965},
  doi       = {10.1002/jbm.a.34767},
  pages     = {1079 -- 1084},
  year      = {2014},
  abstract  = {Use of textile structures for reinforcement of pelvic floor structures has to consider mechanical forces to the implant, which are quite different to the tension free conditions of the abdominal wall. Thus, biomechanical analysis of textile devices has to include the impact of strain on stretchability and effective porosity. Prolift® and Prolift + M®, developed for tension free conditions, were tested by measuring stretchability and effective porosity applying mechanical strain. For comparison, we used Dynamesh-PR4®, which was designed for pelvic floor repair to withstand mechanical strain. Prolift® at rest showed moderate porosity with little stretchability but complete loss of effective porosity at strain of 4.9 N/cm. Prolift + M® revealed an increased porosity at rest, but at strain showed high stretchability, with subsequent loss of effective porosity at strain of 2.5 N/cm. Dynamesh PR4® preserved its high porosity even under strain, but as consequence of limited stretchability. Though in tension free conditions Prolift® and Prolift + M® can be considered as large pore class I meshes, application of mechanical strain rapidly lead to collapse of pores. The loss of porosity at mechanical stress can be prevented by constructions with high structural stability. Assessment of porosity under strain was found helpful to define requirements for pelvic floor devices. Clinical studies have to prove whether devices with high porosity as well as high structural stability can improve the patients' outcome.},
  language  = {en}
}
@article{JellinghausGoettscheHoffschmidt2006,
  author    = {Jellinghaus, Sabine and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard},
  title     = {Beleuchtung mit gesteuertem Farblicht - Bewertung eines Prototypen},
  series = {Zw{\"o}lftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 26./27. Januar 2006, Kloster Banz, Bad Staffelstein / OTTI - Training, Seminare, Tagungen. [Fachliche Gesamtleitung: Claus Steffan. Veranst.: OTTI, Bereich Erneuerbare Energien. Mitveranst.: Architektenkammer Baden-W{\"u}rttemberg, Stuttgart ...] / . - (Wissen f{\"u}r Profis)},
  journal   = {Zw{\"o}lftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 26./27. Januar 2006, Kloster Banz, Bad Staffelstein / OTTI - Training, Seminare, Tagungen. [Fachliche Gesamtleitung: Claus Steffan. Veranst.: OTTI, Bereich Erneuerbare Energien. Mitveranst.: Architektenkammer Baden-W{\"u}rttemberg, Stuttgart ...] / . - (Wissen f{\"u}r Profis)},
  publisher = {OTTI, Bereich Erneuerbare Energien},
  address   = {Regensburg},
  isbn      = {3-934681-43-3},
  pages     = {89 -- 93},
  year      = {2006},
  language  = {de}
}
@article{JayaramanMummidisettyLoeschetal.2019,
  author    = {Jayaraman, Chandrasekaran and Mummidisetty, Chaitanya Krishna and Loesch, Alexandra and Kaur, Sandi and Hoppe-Ludwig, Shenan and Staat, Manfred and Jayaraman, Arun},
  title     = {Postural and metabolic benefits of using a forearm support walker in older adults with impairments},
  series = {Archives of Physical Medicine and Rehabilitation},
  volume    = {Volume 100},
  journal   = {Archives of Physical Medicine and Rehabilitation},
  number    = {Issue 4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0003-9993},
  doi       = {10.1016/j.apmr.2018.10.001},
  pages     = {638 -- 647},
  year      = {2019},
  language  = {en}
}
@article{JanzVoss1999,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Dienstleistungsexport: Innovative Unternehmen sind exportst{\"a}rker / Janz, N. und k. Voß},
  year      = {1999},
  language  = {de}
}
@article{JanzVoss1999,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationen im Dienstleistungssektor: Gegens{\"a}tzliche Entwicklungen in den Branchen / Janz, N. und k. Voß},
  year      = {1999},
  language  = {de}
}
@article{JanzVoss1999,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationst{\"a}tigkeit im Verarbeitenden Gewerbe und Bergbau hat zugenommen / Janz, N. und k. Voß},
  year      = {1999},
  language  = {de}
}
@article{JanzVoss2001,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationen im Dienstleistungssektor: Rationalisierung steht nicht im Vordergrund / Janz, N. und K. Voß},
  year      = {2001},
  language  = {de}
}
@article{JanzVoss2001,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationsverhalten der deutschen Wirtschaft: Spitzenstellung bei Marktneuheiten / Janz, N. und K. Voß},
  year      = {2001},
  language  = {de}
}
@article{JanzVoss2000,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationen im verarbeitenden Gewerbe: Kleine und mittlere Unternehmen verschenken Gewinnchancen / Janz, N. und K. Voß},
  year      = {2000},
  language  = {de}
}
@article{JanzVoss2000,
  author    = {Janz, Norbert and Voß, K.},
  title     = {Innovationen im verarbeitenden Gewerbe: Ostdeutsche Unternehmen haben sich weitgehend angepaßt / Janz, N.},
  year      = {2000},
  language  = {de}
}
@article{JanzVoss2000,
  author    = {Janz, Norbert and Voß, K.},
  title     = {MIP-Nutzerkonferenz - Forschung mit dem Mannheimer Innovationspanel / Janz, N. und k. Voß},
  pages     = {4 -- 4},
  year      = {2000},
  language  = {de}
}
@article{JanzRoth1997,
  author    = {Janz, Norbert and Roth, M.},
  title     = {Innovationsreport Großhandel},
  series = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell. 4 (1997)},
  journal   = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell. 4 (1997)},
  isbn      = {0946-4689},
  pages     = {1 -- 2},
  year      = {1997},
  language  = {de}
}
@article{JanzLoeoefPeters2004,
  author    = {Janz, Norbert and L{\"o}{\"o}f, Hans and Peters, Bettina},
  title     = {Firm Level Innovation and Productivity, Is there a Common Story Across Countries?},
  series = {Problems and Perspectives in Management (2004)},
  journal   = {Problems and Perspectives in Management (2004)},
  isbn      = {ISSN 1727-7051},
  pages     = {184 -- 204},
  year      = {2004},
  language  = {en}
}
@article{JanzGottschalk2002,
  author    = {Janz, Norbert and Gottschalk, Sandra},
  title     = {Bestimmungsfaktoren der Innovationst{\"a}tigkeit / Gottschalk, S. und N. Janz},
  series = {Innovationsforschung heute : die Mannheimer Innovationspanels / Norbert Janz ; Georg Licht (Hrsg.)},
  journal   = {Innovationsforschung heute : die Mannheimer Innovationspanels / Norbert Janz ; Georg Licht (Hrsg.)},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  isbn      = {3-7890-8361-5},
  pages     = {17 -- 39},
  year      = {2002},
  language  = {de}
}
@article{JanzGottschalk2004,
  author    = {Janz, Norbert and Gottschalk, Sandra},
  title     = {Innovationst{\"a}tigkeit deutscher Unternehmen. Messung, Bestimmungs- und Erfolgsfaktoren / Janz, N. und S. Gottschalk},
  series = {Economia (2004)},
  journal   = {Economia (2004)},
  pages     = {19 -- 29},
  year      = {2004},
  language  = {de}
}
@article{JanzGoedhuysMohnen2008,
  author    = {Janz, Norbert and Goedhuys, Micheline and Mohnen, Pierre},
  title     = {What drives productivity in Tanzanian manufacturing firms: technology or business environment? / Goedhuys, Micheline ; Janz, Norbert ; Mohnen, Pierre},
  series = {The European Journal of Development Research. 20 (2008), H. 2},
  journal   = {The European Journal of Development Research. 20 (2008), H. 2},
  isbn      = {1743-9728},
  pages     = {199 -- 218},
  year      = {2008},
  language  = {en}
}
@article{JanzGoedhuysMairesseetal.2008,
  author    = {Janz, Norbert and Goedhuys, Micheline and Mairesse, Jacques and Mohnen, Pierre},
  title     = {Micro-evidence on innovation and development (MEIDE): an introduction / Goedhuys, Micheline ; Janz, Norbert ; Mairesse, Jacques ; Mohnen, Pierre},
  series = {The European Journal of Development Research. 20 (2008), H. 2},
  journal   = {The European Journal of Development Research. 20 (2008), H. 2},
  isbn      = {1743-9728},
  pages     = {167 -- 171},
  year      = {2008},
  language  = {en}
}
@article{JanzEblingHippetal.1999,
  author    = {Janz, Norbert and Ebling, G{\"u}nther and Hipp, C. and Licht, Georg},
  title     = {Innovationsaktivit{\"a}ten im Dienstleistungssektor: Ergebnis der Innovationserhebung 1997 / Ebling, G., C. Hipp, N. Janz, G. Licht und H. Niggemann},
  series = {Innovationsaktivit{\"a}ten in der deutschen Wirtschaft : Analyse der Mannheimer Innovationspanels im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz ... (Hrsg.)},
  journal   = {Innovationsaktivit{\"a}ten in der deutschen Wirtschaft : Analyse der Mannheimer Innovationspanels im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz ... (Hrsg.)},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  isbn      = {3-7890-6179-4},
  pages     = {99 -- 222},
  year      = {1999},
  language  = {de}
}
@article{JanzEblingGottschalketal.2002,
  author    = {Janz, Norbert and Ebling, G{\"u}nther and Gottschalk, Sandra and Peters, Bettina},
  title     = {Die Mannheimer Innovationspanels / Janz, N., G. Ebling, S. Gottschalk und B. Peters},
  series = {Allgemeines Statistisches Archiv. 86 (2002)},
  journal   = {Allgemeines Statistisches Archiv. 86 (2002)},
  isbn      = {0002-6018},
  pages     = {189 -- 202},
  year      = {2002},
  language  = {de}
}
@article{JanzEblingGottschalketal.2001,
  author    = {Janz, Norbert and Ebling, G{\"u}nther and Gottschalk, Sandra and Niggemann, Hiltrud},
  title     = {The Mannheim Innovation Panels (MIP and MIP-S) of the Centre for European Economic Research (ZEW) / Janz, N., G. Ebling, S. Gottschalk und H. Niggemann},
  series = {Schmollers Jahrbuch : Zeitschrift f{\"u}r Wirtschafts- und Sozialwissenschaften ; journal of applied social science studies. 121 (2001)},
  journal   = {Schmollers Jahrbuch : Zeitschrift f{\"u}r Wirtschafts- und Sozialwissenschaften ; journal of applied social science studies. 121 (2001)},
  isbn      = {0342-1783},
  pages     = {123 -- 129},
  year      = {2001},
  language  = {en}
}
@article{JanzCzarnitzkiEbelingetal.2000,
  author    = {Janz, Norbert and Czarnitzki, Dirk and Ebeling, G{\"u}nther and Gottschalk, Sandra},
  title     = {Quellen f{\"u}r Innovationen im Verarbeitenden Gewerbe und im Bergbau / Czarnitzki, D., G. Ebling, S. Gottschalk, N. Janz und H. Niggemann},
  series = {Quellen f{\"u}r Innovationen : Analyse der ZEW-Innovationserhebungen 1999 im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz (Hrsg.)},
  journal   = {Quellen f{\"u}r Innovationen : Analyse der ZEW-Innovationserhebungen 1999 im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz (Hrsg.)},
  publisher = {ZEW},
  address   = {Mannheim},
  pages     = {1 -- 26},
  year      = {2000},
  language  = {de}
}
@article{JanzBlindCzarnitzkietal.2000,
  author    = {Janz, Norbert and Blind, K. and Czarnitzki, Dirk and Ebeling, G{\"u}nther},
  title     = {Quellen f{\"u}r Innovationen im Dienstleistungssektor / Blind, K., D. Czarnitzki, G. Ebling, S. Gottschalk, N. Janz und H. Niggemann},
  series = {Quellen f{\"u}r Innovationen : Analyse der ZEW-Innovationserhebungen 1999 im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz (Hrsg.)},
  journal   = {Quellen f{\"u}r Innovationen : Analyse der ZEW-Innovationserhebungen 1999 im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz (Hrsg.)},
  publisher = {ZEW},
  address   = {Mannheim},
  pages     = {27 -- 55},
  year      = {2000},
  language  = {de}
}
@article{JanzBeiseEblingetal.1999,
  author    = {Janz, Norbert and Beise, M. and Ebling, G{\"u}nther and Licht, Georg},
  title     = {Innovationsaktivit{\"a}ten im verarbeitenden Gewerbe: Ergebnisse der Innovationserhebung 1997 / Beise, M., G. Ebling, N. Janz, G. Licht und H. Niggemann},
  series = {Innovationsaktivit{\"a}ten in der deutschen Wirtschaft : Analyse der Mannheimer Innovationspanels im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz ... (Hrsg.)},
  journal   = {Innovationsaktivit{\"a}ten in der deutschen Wirtschaft : Analyse der Mannheimer Innovationspanels im Verarbeitenden Gewerbe und im Dienstleistungssektor / Norbert Janz ... (Hrsg.)},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  isbn      = {3-7890-6179-4},
  pages     = {9 -- 98},
  year      = {1999},
  language  = {de}
}
@article{Janz2002,
  author    = {Janz, Norbert},
  title     = {Innovationserfolge und die Aneignung von Innovationsertr{\"a}gen},
  series = {Innovationsforschung heute : die Mannheimer Innovationspanels / Norbert Janz ; Georg Licht (Hrsg.)},
  journal   = {Innovationsforschung heute : die Mannheimer Innovationspanels / Norbert Janz ; Georg Licht (Hrsg.)},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  isbn      = {3-7890-8361-5},
  pages     = {73 -- 111},
  year      = {2002},
  language  = {de}
}
@article{Janz2002,
  author    = {Janz, Norbert},
  title     = {Outlier Robust Estimation of an Euler Equation Investment Model with German Firm Level Panel Data},
  series = {Contributions to modern econometrics : from data analysis to economic policy ; [dedicated to Gerd Hansen on the occasion of his 65th Birthday] / ed. by Ingo Klein and Stefan Mittnik},
  journal   = {Contributions to modern econometrics : from data analysis to economic policy ; [dedicated to Gerd Hansen on the occasion of his 65th Birthday] / ed. by Ingo Klein and Stefan Mittnik},
  publisher = {Kluwer Academic Publ.},
  address   = {Dordrecht [u.a.]},
  isbn      = {1402073348},
  pages     = {87 -- 103},
  year      = {2002},
  language  = {en}
}
@article{Janz2003,
  author    = {Janz, Norbert},
  title     = {Korreferat zum Referat von O. H{\"u}bler „Neuere Entwicklungen in der Mikro{\"o}konometrie"},
  series = {Empirische Wirtschaftsforschung : Methoden und Anwendungen / hrsg. von Wolfgang Franz ...},
  journal   = {Empirische Wirtschaftsforschung : Methoden und Anwendungen / hrsg. von Wolfgang Franz ...},
  publisher = {Mohr Siebeck},
  address   = {T{\"u}bingen},
  isbn      = {3-16-148158-5},
  pages     = {37 -- 40},
  year      = {2003},
  language  = {de}
}
@article{Janz2001,
  author    = {Janz, Norbert},
  title     = {Ostdeutschland: Dienstleister sind Schwachstelle},
  series = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell. 8 (2001), H. 10},
  journal   = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell. 8 (2001), H. 10},
  isbn      = {0946-4689},
  pages     = {3 -- 3},
  year      = {2001},
  language  = {de}
}
@article{Janz2000,
  author    = {Janz, Norbert},
  title     = {Europa braucht innovative Unternehmen},
  series = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell (2000)},
  journal   = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell (2000)},
  isbn      = {0946-4689},
  pages     = {30 -- 32},
  year      = {2000},
  language  = {de}
}
@article{Janz2005,
  author    = {Janz, Norbert},
  title     = {Der Skandal der Arbeitslosigkeit},
  series = {Christsein heute: Zeitschrift f{\"u}r Gemeinde und Familie / Bund Freier Evangelischer Gemeinden. 112 (2005), H. 4},
  journal   = {Christsein heute: Zeitschrift f{\"u}r Gemeinde und Familie / Bund Freier Evangelischer Gemeinden. 112 (2005), H. 4},
  isbn      = {0942-0061},
  pages     = {12 -- 15},
  year      = {2005},
  language  = {de}
}
@article{Janz2002,
  author    = {Janz, Norbert},
  title     = {Bremse f{\"u}r den Fortschritt. Wie Fachkr{\"a}ftemangel die Innovationskultur hemmt},
  series = {Frankfurter Allgemeine Zeitung . Sonderbeilage 204 "Unternehmer heute", B5 (2002)},
  journal   = {Frankfurter Allgemeine Zeitung . Sonderbeilage 204 "Unternehmer heute", B5 (2002)},
  year      = {2002},
  language  = {de}
}
@article{Janz2002,
  author    = {Janz, Norbert},
  title     = {Innovative Power of German Manufacturing Industry Slows Down},
  series = {ZEW news. English edition. 4 (2002), H. 2002},
  journal   = {ZEW news. English edition. 4 (2002), H. 2002},
  pages     = {5 -- 5},
  year      = {2002},
  language  = {en}
}
@article{Janz2002,
  author    = {Janz, Norbert},
  title     = {Innovationskraft der deutschen Industrie gebremst},
  series = {ZEW news. (2002)},
  journal   = {ZEW news. (2002)},
  pages     = {4 -- 4},
  year      = {2002},
  language  = {de}
}
@article{Janz2001,
  author    = {Janz, Norbert},
  title     = {Innovations in Germany: Market Novelties Gain Greater Importance},
  series = {ZEW news. English edition (2001)},
  journal   = {ZEW news. English edition (2001)},
  pages     = {3 -- 3},
  year      = {2001},
  language  = {en}
}
@article{Janz2001,
  author    = {Janz, Norbert},
  title     = {Innovationen in Deutschland: Unternehmen setzen verst{\"a}rkt auf Marktneuheiten},
  series = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell. 8 (2001), H. 6},
  journal   = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell. 8 (2001), H. 6},
  isbn      = {0946-4689},
  pages     = {1 -- 2},
  year      = {2001},
  language  = {de}
}
@article{Janz2001,
  author    = {Janz, Norbert},
  title     = {Innovationsverhalten im Dienstleistungssektor: Rationalisierungsmaßnahmen stehen nicht im Vordergrund},
  series = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell. 8 (2001), H. 7},
  journal   = {EU-Magazin : unabh{\"a}ngige Zeitschrift f{\"u}r Wirtschaft, Recht und Politik in der Europ{\"a}ischen Union ; mit ZEW aktuell. 8 (2001), H. 7},
  isbn      = {0946-4689},
  pages     = {2 -- 2},
  year      = {2001},
  language  = {de}
}
@article{Janz2000,
  author    = {Janz, Norbert},
  title     = {Innovationserfolg kleiner und mittlerer Unternehmen l{\"a}ßt zu w{\"u}nschen {\"u}brig},
  series = {ZEW news (2000)},
  journal   = {ZEW news (2000)},
  pages     = {1 -- 2},
  year      = {2000},
  language  = {de}
}
@article{JansenBehbahaniLaumenetal.2010,
  author    = {Jansen, Sebastian and Behbahani, Mehdi and Laumen, Marco and Kaufmann, Tim and Hormes, Marcus and Schmitz-Rode, Thomas and Behr, Marek and Steinseifer, Ulrich},
  title     = {3D Stereo-PIV Validation for CFD-Simulation of Steady Flow through the Human Aorta using Rapid-Prototyping techniques},
  year      = {2010},
  language  = {en}
}
@article{JansenBehbahaniLaumenetal.2010,
  author    = {Jansen, S. V. and Behbahani, Mehdi and Laumen, M. and Kaufmann, T. and Hormes, M. and Behr, M. and Schmitz-Rode, T. and Steinseifer, U.},
  title     = {Investigation of Steady Flow Through a Realistic Model of the Thoracic Human Aorta Using 3D Stereo PIV and CFD-Simulation},
  series = {ASAIO Journal},
  volume    = {56},
  journal   = {ASAIO Journal},
  number    = {2},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  doi       = {10.1097/01.mat.0000369377.65122.a3},
  pages     = {98},
  year      = {2010},
  language  = {en}
}
@article{JanThimoBauerBieleetal.2019,
  author    = {Jan Thimo, Grundmann and Bauer, Waldemar and Biele, Jens and Boden, Ralf and Ceriotti, Matteo and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Hercik, David},
  title     = {Capabilities of Gossamer-1 derived small spacecraft solar sails carrying Mascot-derived nanolanders for in-situ surveying of NEAs},
  series = {Acta Astronautica},
  volume    = {156},
  journal   = {Acta Astronautica},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0094-5765},
  doi       = {10.1016/j.actaastro.2018.03.019},
  pages     = {330 -- 362},
  year      = {2019},
  language  = {en}
}
@article{JakobMartinezMandaweetal.2013,
  author    = {Jakob, Felix and Martinez, Ronny and Mandawe, John and Hellmuth, Hendrik and Siegert, Petra and Maurer, Karl-Heinz and Schwaneberg, Ulrich},
  title     = {Surface charge engineering of a Bacillus gibsonii subtilisin protease},
  series = {Applied microbiology and biotechnology},
  volume    = {Vol. 97},
  journal   = {Applied microbiology and biotechnology},
  number    = {Iss. 15},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-0614 (E-Journal); 0171-1741 (Print); 0175-7598 (Print); 0340-2118 (Print)},
  pages     = {6793 -- 6802},
  year      = {2013},
  language  = {en}
}
@article{JahnkeRousselHombachetal.2016,
  author    = {Jahnke, Siegfried and Roussel, Johanna and Hombach, Thomas and Kochs, Johannes and Fischbach, Andreas and Huber, Gregor and Scharr, Hanno},
  title     = {phenoSeeder - A robot system for automated handling and phenotyping of individual seeds},
  series = {Plant physiology},
  volume    = {172},
  journal   = {Plant physiology},
  number    = {3},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {0032-0889},
  doi       = {10.1104/pp.16.01122},
  pages     = {1358 -- 1370},
  year      = {2016},
  abstract  = {The enormous diversity of seed traits is an intriguing feature and critical for the overwhelming success of higher plants. In particular, seed mass is generally regarded to be key for seedling development but is mostly approximated by using scanning methods delivering only two-dimensional data, often termed seed size. However, three-dimensional traits, such as the volume or mass of single seeds, are very rarely determined in routine measurements. Here, we introduce a device named phenoSeeder, which enables the handling and phenotyping of individual seeds of very different sizes. The system consists of a pick-and-place robot and a modular setup of sensors that can be versatilely extended. Basic biometric traits detected for individual seeds are two-dimensional data from projections, three-dimensional data from volumetric measures, and mass, from which seed density is also calculated. Each seed is tracked by an identifier and, after phenotyping, can be planted, sorted, or individually stored for further evaluation or processing (e.g. in routine seed-to-plant tracking pipelines). By investigating seeds of Arabidopsis (Arabidopsis thaliana), rapeseed (Brassica napus), and barley (Hordeum vulgare), we observed that, even for apparently round-shaped seeds of rapeseed, correlations between the projected area and the mass of seeds were much weaker than between volume and mass. This indicates that simple projections may not deliver good proxies for seed mass. Although throughput is limited, we expect that automated seed phenotyping on a single-seed basis can contribute valuable information for applications in a wide range of wild or crop species, including seed classification, seed sorting, and assessment of seed quality.},
  language  = {en}
}
@article{JahnkeMenzelDusschotenetal.2009,
  author    = {Jahnke, Siegfried and Menzel, Marion I. and Dusschoten, Dagmar van and Roeb, Gerhard W. and B{\"u}hler, Jonas and Minwuyelet, Senay and Bl{\"u}mler, Peter and Temperton, Vicky M. and Hombach, Thomas and Streun, Matthias and Beer, Simone and Khodaverdi, Maryam and Ziemons, Karl and Coenen, Heinz H. and Schurr, Ulrich},
  title     = {Combined MRI-PET dissects dynamic changes in plant structures and functions},
  series = {The Plant Journal},
  volume    = {59},
  journal   = {The Plant Journal},
  number    = {4},
  publisher = {Wiley},
  address   = {Weinheim},
  isbn      = {1365-313X},
  pages     = {634 -- 644},
  year      = {2009},
  abstract  = {Unravelling the factors determining the allocation of carbon to various plant organs is one of the great challenges of modern plant biology. Studying allocation under close to natural conditions requires non-invasive methods, which are now becoming available for measuring plants on a par with those developed for humans. By combining magnetic resonance imaging (MRI) and positron emission tomography (PET), we investigated three contrasting root/shoot systems growing in sand or soil, with respect to their structures, transport routes and the translocation dynamics of recently fixed photoassimilates labelled with the short-lived radioactive carbon isotope 11C. Storage organs of sugar beet (Beta vulgaris) and radish plants (Raphanus sativus) were assessed using MRI, providing images of the internal structures of the organs with high spatial resolution, and while species-specific transport sectoralities, properties of assimilate allocation and unloading characteristics were measured using PET. Growth and carbon allocation within complex root systems were monitored in maize plants (Zea mays), and the results may be used to identify factors affecting root growth in natural substrates or in competition with roots of other plants. MRI-PET co-registration opens the door for non-invasive analysis of plant structures and transport processes that may change in response to genomic, developmental or environmental challenges. It is our aim to make the methods applicable for quantitative analyses of plant traits in phenotyping as well as in understanding the dynamics of key processes that are essential to plant performance.},
  language  = {en}
}
@article{JahnkeBaumann1987,
  author    = {Jahnke, J. and Baumann, Marcus},
  title     = {Differentiation between Phaeocystis pouchetii (Har.) Lagerheim and Phaeocystis globosa Scherffel},
  series = {Hydrobiological bulletin},
  volume    = {Vol. 21},
  journal   = {Hydrobiological bulletin},
  number    = {Iss. 2},
  issn      = {0165-1404 (Print); 1573-5125 (E-Journal)},
  pages     = {141 -- 147},
  year      = {1987},
  language  = {en}
}
@article{JacobsQuernheimAghadavoodiJolfaei1991,
  author    = {Jacobs, Stephan and Quernheim, Ulrich and Aghadavoodi Jolfaei, Masoud},
  title     = {Performance Evalutation of three Access Protocols for VSAT Networks / Ulrich Quernheim, Stephan Jacobs, Masoud Aghadavoodi Jolfaei},
  series = {Proceedings of the second European Conference on Satellite Communications : ECSC-2 ; Palais de Congr{\`e}s, Li{\`e}ge, Belgium, 22 - 24 October 1991 / [ed.: Brigitte Kaldeich]},
  journal   = {Proceedings of the second European Conference on Satellite Communications : ECSC-2 ; Palais de Congr{\`e}s, Li{\`e}ge, Belgium, 22 - 24 October 1991 / [ed.: Brigitte Kaldeich]},
  publisher = {ESA Publ. Div.},
  address   = {Noordwijk},
  isbn      = {92-9092-170-6},
  pages     = {XXXII, 533 S. : Ill., graph. Darst.},
  year      = {1991},
  language  = {en}
}
@article{JacobsQuernheim1990,
  author    = {Jacobs, Stephan and Quernheim, Ulrich},
  title     = {ARQ Error Control for Multipoint Satellite Communications / Ulrich Quernheim, Stephan Jacobs},
  series = {Computer networking : proceedings of the IFIP TC 6 Conference on Computer Networking, COMNET '90, Budapest, Hungary, 8-10 May, 1990 / edited by L{\´a}szl{\´o} Csaba, Tibor Szentiv{\´a}nyi, Katie Tarnay},
  journal   = {Computer networking : proceedings of the IFIP TC 6 Conference on Computer Networking, COMNET '90, Budapest, Hungary, 8-10 May, 1990 / edited by L{\´a}szl{\´o} Csaba, Tibor Szentiv{\´a}nyi, Katie Tarnay},
  publisher = {Elsevier},
  address   = {New York, N.Y.},
  isbn      = {0444888721},
  pages     = {xi, 505 p : ill},
  year      = {1990},
  language  = {en}
}
@article{JacobsQuernheim1990,
  author    = {Jacobs, Stephan and Quernheim, Ulrich},
  title     = {Multicopy ARQ Error Control Techniques for Multipoint Satellite Links / Ulrich Quernheim, Stephan Jacobs},
  series = {Proceedings of the IFIP TC 6 International Conference on Information Network and Data Communication : Lillehammer, Norway, 26 - 29 March, 1990 / ed. by Dipak Khakhar ...},
  journal   = {Proceedings of the IFIP TC 6 International Conference on Information Network and Data Communication : Lillehammer, Norway, 26 - 29 March, 1990 / ed. by Dipak Khakhar ...},
  publisher = {North-Holland},
  address   = {Amsterdam [u.a.]},
  isbn      = {0-444-88696-6},
  pages     = {XI, 411 S. : Ill., graph. Darst.},
  year      = {1990},
  language  = {en}
}
@article{JacobsQuernheim1990,
  author    = {Jacobs, Stephan and Quernheim, Ulrich},
  title     = {Error Control Techniques for Digital Satellite Links},
  series = {C-band antennas for regional communication systems : 1st European Conference Satellite Communications, ECSC-1, M{\"u}nchen, 28.-30.11.89 / Wolf, H. u.a. [Mitarb.]. Information und Dokumentation, Messerschmitt-B{\"o}lkow-Blohm GmbH (MBB), M{\"u}nchen},
  journal   = {C-band antennas for regional communication systems : 1st European Conference Satellite Communications, ECSC-1, M{\"u}nchen, 28.-30.11.89 / Wolf, H. u.a. [Mitarb.]. Information und Dokumentation, Messerschmitt-B{\"o}lkow-Blohm GmbH (MBB), M{\"u}nchen},
  publisher = {OTN-Berichtsstelle, Technisch-wissenschaftliche Information, Messerschmitt-B{\"o}lkow-Blohm GmbH},
  address   = {M{\"u}nchen},
  year      = {1990},
  language  = {en}
}
@article{JacobsPohlJarke1992,
  author    = {Jacobs, Stephan and Pohl, Klaus and Jarke, Matthias},
  title     = {Qualit{\"a}t von Informationssystemen / Klaus Pohl, Stephan Jacobs, Matthias Jarke},
  series = {Information als Produktionsfaktor : Karlsruhe, 28. September bis 2. Oktober 1992 / Winfried G{\"o}rke ... (Hrsg.)},
  journal   = {Information als Produktionsfaktor : Karlsruhe, 28. September bis 2. Oktober 1992 / Winfried G{\"o}rke ... (Hrsg.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-55960-4},
  pages     = {XV, 729 S. : Ill., graph. Darst.},
  year      = {1992},
  language  = {de}
}
@article{JacobsJarkePohletal.1993,
  author    = {Jacobs, Stephan and Jarke, Matthias and Pohl, Klaus and Bubenko, Janis},
  title     = {Requirements Engineering : An Integrated View of Representations, Process, and Domain / Jarke, Matthias ; Pohl, Klaus ; Jacobs, Stephan ; Bubenko, Janis ...},
  series = {Software engineering : 4th European Software Engineering Conference Garmisch-Partenkirchen, Germany, September 13 - 17, 1993 ; proceedings / ESEC '93. Ian Sommerville ... (eds.)},
  journal   = {Software engineering : 4th European Software Engineering Conference Garmisch-Partenkirchen, Germany, September 13 - 17, 1993 ; proceedings / ESEC '93. Ian Sommerville ... (eds.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-57209-0},
  pages     = {100 -- 114},
  year      = {1993},
  language  = {en}
}
@article{JacobsJarkePohl1994,
  author    = {Jacobs, Stephan and Jarke, Matthias and Pohl, Klaus},
  title     = {Requirements Engineering 1993},
  series = {Automated software engineering : the international journal of automated reasoning and artificial intelligence in software engineering. Vol. 1 (1994), H. No. 1},
  journal   = {Automated software engineering : the international journal of automated reasoning and artificial intelligence in software engineering. Vol. 1 (1994), H. No. 1},
  isbn      = {0928-8910},
  year      = {1994},
  language  = {en}
}
@article{JacobsHolten1995,
  author    = {Jacobs, Stephan and Holten, Roland},
  title     = {Goal Driven Business Modelling - Supporting Decision Making within Information System Development},
  series = {Conference on Organizational Computing Systems : August 13 - 16, 1995, Milpitas, Calif. / general ed. Nora Comstock ...},
  journal   = {Conference on Organizational Computing Systems : August 13 - 16, 1995, Milpitas, Calif. / general ed. Nora Comstock ...},
  publisher = {ACM},
  address   = {New York, NY},
  isbn      = {0-89791-706-5},
  pages     = {III, 353 S. : graph. Darst.},
  year      = {1995},
  language  = {en}
}
@article{JacobsHermanns1996,
  author    = {Jacobs, Stephan and Hermanns, Oliver},
  title     = {Cooperative Design: Requirements on Network Technology and Document Architecture},
  series = {Selected papers of the 6th Joint European Networking Conference / guest ed.: J. Barber{\´a}},
  journal   = {Selected papers of the 6th Joint European Networking Conference / guest ed.: J. Barber{\´a}},
  publisher = {Elsevier},
  address   = {Amsterdam [u.a.]},
  pages     = {S. 428 - 600 : Ill., graph. Darst.},
  year      = {1996},
  language  = {en}
}
@article{JacobsGrobKethers1994,
  author    = {Jacobs, Stephan and Grob, Robert and Kethers, Stefanie},
  title     = {Towards CIS in Quality Management - Integration of Agents and Methods / Robert Grob, Stephan Jacobs, Stefanie Kethers},
  series = {Proceedings of the Second International Conference on Cooperative Information Systems : May 17 - 20, 1994, Toronto, Canada / sponsored by the University of Toronto. Editors: Michael Brodie},
  journal   = {Proceedings of the Second International Conference on Cooperative Information Systems : May 17 - 20, 1994, Toronto, Canada / sponsored by the University of Toronto. Editors: Michael Brodie},
  publisher = {University of Toronto Press},
  address   = {Toronto},
  year      = {1994},
  language  = {en}
}
@article{JacobsGebhardtKethersetal.1996,
  author    = {Jacobs, Stephan and Gebhardt, Michael and Kethers, Stefanie and Rzasa, Wojtek},
  title     = {Filling HTML forms simultaneously: CoWeb — architecture and functionality},
  series = {Computer Networks and ISDN Systems. Vol. 30 (1996), H. Issues 1-7},
  journal   = {Computer Networks and ISDN Systems. Vol. 30 (1996), H. Issues 1-7},
  isbn      = {0376-5075},
  pages     = {1385 -- 1395},
  year      = {1996},
  language  = {en}
}
@article{JacobsGebhardt1996,
  author    = {Jacobs, Stephan and Gebhardt, Michael},
  title     = {Conflict Management in Design /},
  series = {Transactions from the Eighth Symposium on Quality Function Deployment : (concurrent with International Symposium on QFD 96] ; June 9 - 11, 1996, Novi, Michigan, USA / sponsored by: QFD Institute},
  journal   = {Transactions from the Eighth Symposium on Quality Function Deployment : (concurrent with International Symposium on QFD 96] ; June 9 - 11, 1996, Novi, Michigan, USA / sponsored by: QFD Institute},
  publisher = {QFD Institute},
  address   = {Ann Arbor, Mich.},
  pages     = {599 S.},
  year      = {1996},
  language  = {en}
}
@article{JacobsGebhardt1995,
  author    = {Jacobs, Stephan and Gebhardt, Michael},
  title     = {Kooperation im Entwurf mit Hilfe lose gekoppelter Sichten},
  series = {Herausforderungen eines globalen Informationsverbundes f{\"u}r die Informatik : 25. GI-Jahrestagung und 13. Schweizer Informatikertag, Z{\"u}rich, 18. -20. September 1995 / GISI 95. Friedbert Huber-W{\"a}schle ... (Hrsg.)},
  journal   = {Herausforderungen eines globalen Informationsverbundes f{\"u}r die Informatik : 25. GI-Jahrestagung und 13. Schweizer Informatikertag, Z{\"u}rich, 18. -20. September 1995 / GISI 95. Friedbert Huber-W{\"a}schle ... (Hrsg.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3540602135},
  pages     = {XV, 762 S : graph. Darst.},
  year      = {1995},
  language  = {de}
}
@article{JacobsBerseKlothetal.1993,
  author    = {Jacobs, Stephan and Berse, Holger and Kloth, Matthias and Mittrach, Silke},
  title     = {Projektbeschreibung: CSCW in Designumgebungen / Holger Berse, Stephan Jacobs, Matthias Kloth, Silke Mittrach},
  series = {Workshop "Unterst{\"u}tzung organisatorischer Prozesse durch CSCW" : 4. - 5. November 1993, Westf{\"a}lische Wilhelms-Universit{\"a}t M{\"u}nster / [Institut f{\"u}r Wirtschaftsinformatik, Westf{\"a}lische Wilhelms-Universit{\"a}t M{\"u}nster]. Stefan Kirn ... (Hrsg.)},
  journal   = {Workshop "Unterst{\"u}tzung organisatorischer Prozesse durch CSCW" : 4. - 5. November 1993, Westf{\"a}lische Wilhelms-Universit{\"a}t M{\"u}nster / [Institut f{\"u}r Wirtschaftsinformatik, Westf{\"a}lische Wilhelms-Universit{\"a}t M{\"u}nster]. Stefan Kirn ... (Hrsg.)},
  address   = {M{\"u}nster},
  pages     = {90 S. : graph. Darst.},
  year      = {1993},
  language  = {de}
}
@article{Jacobs1994,
  author    = {Jacobs, Stephan},
  title     = {Methodenorientierte Entwicklung von CSCW},
  series = {Einf{\"u}hrung von CSCW-Systemen in Organisationen : Tagungsband der D-CSCW '94 / Ulrich Hasenkamp (Hrsg.)},
  journal   = {Einf{\"u}hrung von CSCW-Systemen in Organisationen : Tagungsband der D-CSCW '94 / Ulrich Hasenkamp (Hrsg.)},
  publisher = {Vieweg},
  address   = {Braunschweig [u.a.]},
  isbn      = {3-528-05449-2},
  pages     = {XII, 258 S. : graph. Darst.},
  year      = {1994},
  language  = {de}
}
@article{Jacobs1994,
  author    = {Jacobs, Stephan},
  title     = {A Fault Diagnosis System Using Temporary Relations between Symptoms},
  series = {Operations research '93 : extended abstracts of the 18th Symposium on Operations Research held at the University of Cologne, September 1 - 3, 1993 / Achim Bachem ... (ed.)},
  journal   = {Operations research '93 : extended abstracts of the 18th Symposium on Operations Research held at the University of Cologne, September 1 - 3, 1993 / Achim Bachem ... (ed.)},
  publisher = {Physica-Verl.},
  address   = {Heidelberg},
  isbn      = {379080794X},
  pages     = {XXVI, 550 S : graph. Darst.},
  year      = {1994},
  language  = {en}
}