@article{HoetterFateriGebhardt2012, author = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas}, title = {Selective laser melting of metals: desktop machines open up new chances even for small companies}, series = {Advanced materials research}, volume = {622-623}, journal = {Advanced materials research}, publisher = {Trans Tech Publ.}, address = {Baech}, issn = {1662-8985 (E-Journal); 1022-6680 (Print)}, doi = {10.4028/www.scientific.net/AMR.622-623.461}, pages = {461 -- 465}, year = {2012}, abstract = {Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.}, language = {en} } @article{HoerenbaumLaumannProkop2016, author = {H{\"o}renbaum, Christoph and Laumann, J{\"o}rg and Prokop, Ines}, title = {Zur Anwendung des Eurocode 3 Teil 1-2 f{\"u}r die Heißbemessung und Anregungen f{\"u}r dessen Novellierung}, series = {Stahlbau}, volume = {85}, journal = {Stahlbau}, number = {6}, publisher = {Ernst \& Sohn GmbH}, address = {Berlin}, issn = {1437-1049}, doi = {10.1002/stab.201610382}, pages = {429 -- 434}, year = {2016}, abstract = {Die Eurocodes werden bis zum Jahr 2020 im Europ{\"a}ischen Komitee f{\"u}r Normung (CEN), Technisches Komitee TC 250, {\"u}berarbeitet. In Vorbereitung auf die Eurocode-Novellierung haben engagierte Ingenieure im Rahmen der Initiative PraxisRegeln Bau (PRB) die f{\"u}r die praktische Anwendung h{\"a}ufig genutzten Teile des Eurocode 3 untersucht. Mit dem Ziel, die Praxistauglichkeit des Eurocode 3 f{\"u}r die Heißbemessung zu verbessern, wurden die bestehende Norm EN 1993 Teil 1-2 insbesondere in Bezug auf die Anwenderfreundlichkeit analysiert und Vorschl{\"a}ge f{\"u}r die europ{\"a}ische Novellierung erarbeitet. Die Analysen zeigen, dass durch Umstrukturierungen und durch die Einf{\"u}hrung von Tabellen die Verst{\"a}ndlichkeit und Anwenderfreundlichkeit der Regeln f{\"u}r die Heißbemessung bedeutend erh{\"o}ht werden k{\"o}nnen.}, language = {de} } @article{HoehnePulz2009, author = {H{\"o}hne, Tim and Pulz, Christian}, title = {Projekt Adaptive Logistik : Dienstleister f{\"u}r die Montage in der Auftragsfertigung}, series = {RFID-Innovationen in Produktion und Logistik - Eine Analyse zu Potenzialen des RFID-Einsatzes in Produktion und Logistik}, journal = {RFID-Innovationen in Produktion und Logistik - Eine Analyse zu Potenzialen des RFID-Einsatzes in Produktion und Logistik}, editor = {Isensee, Johannes}, issn = {1860-840X}, pages = {11 -- 19}, year = {2009}, language = {de} } @article{HunkerGossmannRamanetal.2021, author = {Hunker, Jan L. and Gossmann, Matthias and Raman, Aravind Hariharan and Linder, Peter}, title = {Artificial neural networks in cardiac safety assessment: Classification of chemotherapeutic compound effects on hiPSC-derived cardiomyocyte contractility}, series = {Journal of Pharmacological and Toxicological Methods}, volume = {111}, journal = {Journal of Pharmacological and Toxicological Methods}, number = {Article number 107044}, publisher = {Elsevier}, address = {New York}, issn = {1056-8719}, doi = {10.1016/j.vascn.2021.107044}, year = {2021}, language = {en} } @article{HulseboschGuentherHornetal.2004, author = {Hulsebosch, R. J. and G{\"u}nther, C. and Horn, C. and Holtmanns, S. and Howker, K. and Paterson, K. and Claessens, J. and Schuba, Marko}, title = {Pioneering Advanced Mobile Privacy and Security}, series = {Security for mobility}, journal = {Security for mobility}, editor = {Mitchell, Chris J.}, publisher = {Institution of Electrical Engineers}, address = {London}, isbn = {9781849190886}, doi = {10.1049/PBTE051E_ch}, pages = {383 -- 432}, year = {2004}, language = {en} } @article{HugenrothNeidlinEngelmannetal.2021, author = {Hugenroth, Kristin and Neidlin, Michael and Engelmann, Ulrich M. and Kaufmann, Tim A. S. and Steinseifer, Ulrich and Heilmann, Torsten}, title = {Tipless Transseptal Cannula Concept Combines Improved Hemodynamic Properties and Risk-Reduced Placement: an In Silico Proof-of-Concept}, series = {Artificial Organs}, journal = {Artificial Organs}, number = {Accepted Article}, publisher = {Wiley}, address = {Weinheim}, issn = {1525-1594}, doi = {10.1111/aor.13964}, year = {2021}, language = {en} } @article{HugenrothBorchardtRitteretal.2021, author = {Hugenroth, Kristin and Borchardt, Ralf and Ritter, Philine and Groß‑Hardt, Sascha and Meyns, Bart and Verbelen, Tom and Steinseifer, Ulrich and Kaufmann, Tim A. S. and Engelmann, Ulrich M.}, title = {Optimizing cerebral perfusion and hemodynamics during cardiopulmonary bypass through cannula design combining in silico, in vitro and in vivo input}, series = {Scientific Reports}, volume = {11}, journal = {Scientific Reports}, number = {Art. No. 16800}, publisher = {Springer}, address = {Berlin}, issn = {2045-2322}, doi = {10.1038/s41598-021-96397-2}, pages = {1 -- 12}, year = {2021}, abstract = {Cardiopulmonary bypass (CPB) is a standard technique for cardiac surgery, but comes with the risk of severe neurological complications (e.g. stroke) caused by embolisms and/or reduced cerebral perfusion. We report on an aortic cannula prototype design (optiCAN) with helical outflow and jet-splitting dispersion tip that could reduce the risk of embolic events and restores cerebral perfusion to 97.5\% of physiological flow during CPB in vivo, whereas a commercial curved-tip cannula yields 74.6\%. In further in vitro comparison, pressure loss and hemolysis parameters of optiCAN remain unaffected. Results are reproducibly confirmed in silico for an exemplary human aortic anatomy via computational fluid dynamics (CFD) simulations. Based on CFD simulations, we firstly show that optiCAN design improves aortic root washout, which reduces the risk of thromboembolism. Secondly, we identify regions of the aortic intima with increased risk of plaque release by correlating areas of enhanced plaque growth and high wall shear stresses (WSS). From this we propose another easy-to-manufacture cannula design (opti2CAN) that decreases areas burdened by high WSS, while preserving physiological cerebral flow and favorable hemodynamics. With this novel cannula design, we propose a cannulation option to reduce neurological complications and the prevalence of stroke in high-risk patients after CPB.}, language = {en} } @article{HuckSchiffelsHerreraetal.2013, author = {Huck, Christina and Schiffels, Johannes and Herrera, Cony N. and Schelden, Maximilian and Selmer, Thorsten and Poghossian, Arshak and Baumann, Marcus and Wagner, Patrick and Sch{\"o}ning, Michael Josef}, title = {Metabolic responses of Escherichia coli upon glucose pulses captured by a capacitive field-effect sensor}, series = {Physica Status Solidi (A)}, volume = {210}, journal = {Physica Status Solidi (A)}, number = {5}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {0031-8965}, doi = {10.1002/pssa.201200900}, pages = {926 -- 931}, year = {2013}, abstract = {Living cells are complex biological systems transforming metabolites taken up from the surrounding medium. Monitoring the responses of such cells to certain substrate concentrations is a challenging task and offers possibilities to gain insight into the vitality of a community influenced by the growth environment. Cell-based sensors represent a promising platform for monitoring the metabolic activity and thus, the "welfare" of relevant organisms. In the present study, metabolic responses of the model bacterium Escherichia coli in suspension, layered onto a capacitive field-effect structure, were examined to pulses of glucose in the concentration range between 0.05 and 2 mM. It was found that acidification of the surrounding medium takes place immediately after glucose addition and follows Michaelis-Menten kinetic behavior as a function of the glucose concentration. In future, the presented setup can, therefore, be used to study substrate specificities on the enzymatic level and may as well be used to perform investigations of more complex metabolic responses. Conclusions and perspectives highlighting this system are discussed.}, language = {en} } @article{HuckPoghossianWagneretal.2012, author = {Huck, Christina and Poghossian, Arshak and Wagner, Patrick and Sch{\"o}ning, Michael Josef}, title = {Combined amperometric/field-effect sensor for the detection of dissolved hydrogen}, series = {Sensors and actuators B: Chemical}, volume = {187}, journal = {Sensors and actuators B: Chemical}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0925-4005}, doi = {10.1016/j.snb.2012.10.050}, pages = {168 -- 173}, year = {2012}, abstract = {Real-time and reliable monitoring of the biogas process is crucial for a stable and efficient operation of biogas production in order to avoid digester breakdowns. The concentration of dissolved hydrogen (H₂) represents one of the key parameters for biogas process control. In this work, a one-chip integrated combined amperometric/field-effect sensor for monitoring the dissolved H₂ concentration has been developed for biogas applications. The combination of two different transducer principles might allow a more accurate and reliable measurement of dissolved H₂ as an early warning indicator of digester failures. The feasibility of the approach has been demonstrated by simultaneous amperometric/field-effect measurements of dissolved H₂ concentrations in electrolyte solutions. Both, the amperometric and the field-effect transducer show a linear response behaviour in the H₂ concentration range from 0.1 to 3\% (v/v) with a slope of 198.4 ± 13.7 nA/\% (v/v) and 14.9 ± 0.5 mV/\% (v/v), respectively.}, language = {en} } @article{HuckPoghossianKerroumietal.2014, author = {Huck, Christina and Poghossian, Arshak and Kerroumi, Iman and Schusser, Sebastian and B{\"a}cker, Matthias and Zander, Willi and Schubert, J{\"u}rgen and Buniatyan, Vahe V. and Martirosyan, Norayr W. and Wagner, Patrick and Sch{\"o}ning, Michael Josef}, title = {Multiparameter sensor chip with Barium Strontium Titanate as multipurpose material}, series = {Electroanalysis}, volume = {26}, journal = {Electroanalysis}, number = {5}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1521-4109 (E-Journal); 1040-0397 (Print)}, doi = {10.1002/elan.201400076}, pages = {980 -- 987}, year = {2014}, abstract = {It is well known that biochemical and biotechnological processes are strongly dependent and affected by a variety of physico-chemical parameters such as pH value, temperature, pressure and electrolyte conductivity. Therefore, these quantities have to be monitored or controlled in order to guarantee a stable process operation, optimization and high yield. In this work, a sensor chip for the multiparameter detection of three physico-chemical parameters such as electrolyte conductivity, pH and temperature is realized using barium strontium titanate (BST) as multipurpose material. The chip integrates a capacitively coupled four-electrode electrolyte-conductivity sensor, a capacitive field-effect pH sensor and a thin-film Pt-temperature sensor. Due to the multifunctional properties of BST, it is utilized as final outermost coating layer of the processed sensor chip and serves as passivation and protection layer as well as pH-sensitive transducer material at the same time. The results of testing of the individual sensors of the developed multiparameter sensor chip are presented. In addition, a quasi-simultaneous multiparameter characterization of the sensor chip in buffer solutions with different pH value and electrolyte conductivity is performed. To study the sensor behavior and the suitability of BST as multifunctional material under harsh environmental conditions, the sensor chip was exemplarily tested in a biogas digestate.}, language = {en} } @article{HuckPoghossianBaeckeretal.2014, author = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Reisert, Steffen and Schubert, J. and Zander, W. and Begoyan, V. K. and Buniatyan, V. V. and Sch{\"o}ning, Michael Josef}, title = {Chemical sensors based on a high-k perovskite oxide of barium strontium titanate}, series = {Procedia Engineering}, volume = {87}, journal = {Procedia Engineering}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1877-7058}, doi = {10.1016/j.proeng.2014.11.258}, pages = {28 -- 31}, year = {2014}, abstract = {High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors for liquids. In this work, BST films have been applied as a sensitive transducer material for a label-free detection of adsorbed charged macromolecules (positively charged polyelectrolytes) and concentration of hydrogen peroxide vapor as well as protection insulator layer for a contactless electrolyte-conductivity sensor. The experimental results of characterization of individual sensors are presented. Special emphasis is devoted towards the development of a capacitively-coupled contactless electrolyte-conductivity sensor.}, language = {en} } @article{HuckPoghossianBaeckeretal.2015, author = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Reisert, Steffen and Kramer, Friederike and Begoyan, Vardges K. and Buniatyan, Vahe V. and Sch{\"o}ning, Michael Josef}, title = {Multi-parameter sensing using high-k oxide of barium strontium titanate}, series = {Physica status solidi (a)}, volume = {212}, journal = {Physica status solidi (a)}, number = {6}, publisher = {Wiley}, address = {Weinheim}, issn = {1862-6319}, doi = {10.1002/pssa.201431911}, pages = {1259}, year = {2015}, abstract = {High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors. In this work, a Si-based sensor chip containing Pt interdigitated electrodes covered with a thin BST layer (485 nm) has been developed for multi-parameter chemical sensing. The chip has been applied for the contactless measurement of the electrolyte conductivity, the detection of adsorbed charged macromolecules (positively charged polyelectrolytes of polyethylenimine) and the concentration of hydrogen peroxide (H2O2) vapor. The experimental results of functional testing of individual sensors are presented. The mechanism of the BST sensitivity to charged polyelectrolytes and H2O2 vapor has been proposed and discussed.}, language = {en} } @article{HuckPoghossianBaeckeretal.2014, author = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Chaudhuri, S. and Zander, W. and Schubert, J. and Begoyan, V. K. and Buniatyan, V. V. and Wagner, P. and Sch{\"o}ning, Michael Josef}, title = {Capacitively coupled electrolyte-conductivity sensor based on high-k material of barium strontium titanate}, series = {Sensors and actuators. B: Chemical}, journal = {Sensors and actuators. B: Chemical}, number = {198}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1873-3077 (E-Journal); 0925-4005 (Print)}, doi = {10.1016/j.snb.2014.02.103}, pages = {102 -- 109}, year = {2014}, language = {en} } @article{HuckJollyWagneretal.2011, author = {Huck, Christina and Jolly, Christina and Wagner, Patrick and Poghossian, Arshak and Sch{\"o}ning, Michael Josef}, title = {One-chip integrated dual amperometric/field-effect sensor for the detection of dissolved hydrogen}, series = {Procedia Engineering. 25 (2011)}, journal = {Procedia Engineering. 25 (2011)}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {1877-7058}, pages = {1161 -- 1164}, year = {2011}, language = {en} } @article{HuberStreblowMuelleretal.2014, author = {Huber, M. and Streblow, R. and M{\"u}ller, D. and Lange, S. and Joneleit, R. and Sefker, T. and Rau, Sebastian and Wollert, J{\"o}rg}, title = {Funksignal{\"u}bertragung in Luftleitungen}, series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik}, volume = {Bd. 65}, journal = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik}, number = {H. 7/8}, issn = {1436-5103}, pages = {36 -- 40}, year = {2014}, language = {de} } @article{HoylerWhiteHoff1998, author = {Hoyler, Friedrich and White, D.H. and Hoff, R. W.}, title = {Nuclear structure of 241Pu from neutron-capture, (d,p)-, and (d,t)-reaction measurements / D. H. White ; R. W. Hoff ... F. Hoyler ...}, series = {Physical review / C. 57 (1998), H. 3}, journal = {Physical review / C. 57 (1998), H. 3}, isbn = {0556-2813}, pages = {1112 -- 1133}, year = {1998}, language = {en} } @article{HoylerShiSchreckenbacketal.1999, author = {Hoyler, Friedrich and Shi, Z. R. and Schreckenback, K. and Aprahamian, A.}, title = {Complete spectroscopy and the 162Dy nucleus / Z. R. Shi ; K. Schreckenbach ; A. Aprahamian ... F. Hoyler ...}, series = {AIP conference proceedings (1999)}, journal = {AIP conference proceedings (1999)}, isbn = {0094-243X}, pages = {237 -- 238}, year = {1999}, language = {en} } @article{HoylerProkofjevsBondarenko1997, author = {Hoyler, Friedrich and Prokofjevs, P. and Bondarenko, V.}, title = {Study of nuclear structure of 164Dy in (n, gamma) and(n, n' gamma) reactions / P. Prokofjevs ; V. Bondarenko ; F. Hoyler ...}, isbn = {1122-1437}, pages = {759}, year = {1997}, language = {en} } @article{HoylerPetkovAndrejtscheff1988, author = {Hoyler, Friedrich and Petkov, P. and Andrejtscheff, W.}, title = {Absolute E0, E1 and E2 transition rates in even-even nuclei obtained in thermal neutron capture / P. Petkov ; W. Andrejtscheff ... F. Hoyler ...}, series = {Journal of Physics G. 14 (1988), H. S}, journal = {Journal of Physics G. 14 (1988), H. S}, isbn = {0305-4616}, pages = {S97 -- S102}, year = {1988}, language = {en} } @article{HoylerMohrStaudt1994, author = {Hoyler, Friedrich and Mohr, P. and Staudt, G.}, title = {Alpha-cluster states of 212po in a realistic potential model}, series = {Physical review / C. 50 (1994), H. 5}, journal = {Physical review / C. 50 (1994), H. 5}, isbn = {0556-2813}, pages = {2631 -- 2634}, year = {1994}, language = {en} } @article{HoylerKesslerGreene1988, author = {Hoyler, Friedrich and Kessler, E. G. and Greene, G. L.}, title = {High accuracy, absolute wavelength determination of capture gamma-ray energies for E\&\#8804;5 MeV and the direct determination of binding energies in light nuclei / E.G. Kessler ; G. L. Greene ... F. Hoyler}, series = {Journal of Physics G. 14 (1988), H. S}, journal = {Journal of Physics G. 14 (1988), H. S}, isbn = {0305-4616}, pages = {S167 -- S174}, year = {1988}, language = {en} } @article{HoylerHoffBoerner1996, author = {Hoyler, Friedrich and Hoff, R. W. and B{\"o}rner, H. G.}, title = {Nuclear structure of 170Tm from neutron-capture and (d,p)-reaction measurements / R. W. Hoff ; H. G. B{\"o}rner ... F. Hoyler ...}, series = {Physical review / C. 54 (1996), H. 1}, journal = {Physical review / C. 54 (1996), H. 1}, isbn = {0556-2813}, pages = {78 -- 116}, year = {1996}, language = {en} } @article{HoylerHamadaHamilton1987, author = {Hoyler, Friedrich and Hamada, S. A. and Hamilton, W. D.}, title = {Gamma-gamma directional correlation measurements in 84Kr following thermal neutron capture by natural krypton / S. A. Hamada ; W. D. Hamilton ; F. Hoyler}, series = {Journal of physics / G. 13 (1987), H. 9}, journal = {Journal of physics / G. 13 (1987), H. 9}, isbn = {0305-4616}, pages = {1143 -- 1163}, year = {1987}, language = {en} } @article{HoylerDrissiTercier1997, author = {Hoyler, Friedrich and Drissi, S. and Tercier, P. A.}, title = {The 112Cd laboratory - An extension : EO strengths, multiphonon states and coupled vibrations / S. Drissi ; P. A. Tercier ... F. Hoyler ...}, series = {Nuclear physics / A. 614 (1997), H. 2}, journal = {Nuclear physics / A. 614 (1997), H. 2}, isbn = {0375-9474}, pages = {137 -- 182}, year = {1997}, language = {en} } @article{HoylerCorminboeufJolie1997, author = {Hoyler, Friedrich and Corminboeuf, F. and Jolie, J.}, title = {Kp=4+ double-gvibration in 164Dy / F. Corminboeuf ; J. Jolie ... F. Hoyler ...}, series = {Physical review / C. 56 (1997), H. 3}, journal = {Physical review / C. 56 (1997), H. 3}, isbn = {0556-2813}, pages = {R1201}, year = {1997}, language = {en} } @article{HoylerColvinRobinson1988, author = {Hoyler, Friedrich and Colvin, G. G. and Robinson, S. J.}, title = {100Ru studied by thermal neutron capture / G. G. Colvin ; S. J. Robinson ; F. Hoyler}, series = {Journal of Physics G. 14 (1988), H. 11}, journal = {Journal of Physics G. 14 (1988), H. 11}, isbn = {0305-4616}, pages = {1411 -- 1421}, year = {1988}, language = {en} } @article{HoylerColvinRobinson1987, author = {Hoyler, Friedrich and Colvin, G. G. and Robinson, S. J.}, title = {E0 transitions in 106Pd studied by neutron capture / G. G. Colvin ; F. Hoyler ; S. J. Robinson}, series = {Journal of physics / G. 13 (1987), H. 2}, journal = {Journal of physics / G. 13 (1987), H. 2}, isbn = {0305-4616}, pages = {191 -- 204}, year = {1987}, language = {en} } @article{HoylerCollinsEid1989, author = {Hoyler, Friedrich and Collins, S. P. and Eid, S. A.}, title = {A search for mixed-symmetry states in the mass A approximately 50 region / S. P. Collins ; S. A. Eid ... F. Hoyler}, series = {Journal of Physics G. 15 (1989), H. 3}, journal = {Journal of Physics G. 15 (1989), H. 3}, isbn = {0954-3899}, pages = {321 -- 332}, year = {1989}, language = {en} } @article{HoylerCizewskiColvin1988, author = {Hoyler, Friedrich and Cizewski, J. A. and Colvin, G. G.}, title = {Neutron capture on 193Ir and \&\#963;<\&\#963; SUB>max states in 195Ir / J. A. Cizewski ; G. G. Colvin ... F. Hoyler ...}, series = {Journal of Physics G. 14 (1988), H. S}, journal = {Journal of Physics G. 14 (1988), H. S}, isbn = {0305-4616}, pages = {S103 -- S108}, year = {1988}, language = {en} } @article{HoylerCataDanilGuazzoni1996, author = {Hoyler, Friedrich and Cata-Danil, G. and Guazzoni, P.}, title = {(p,t) transition strengths for nuclei around Z = 50 and the IBA model / G. Cata-Danil ; P. Guazzoni ... F. Hoyler ...}, series = {Journal of physics / G. 22 (1996), H. 1}, journal = {Journal of physics / G. 22 (1996), H. 1}, isbn = {0305-4616}, pages = {107 -- 114}, year = {1996}, language = {en} } @article{HoylerBoernerRobinson1988, author = {Hoyler, Friedrich and B{\"o}rner, H. G. and Robinson, S.}, title = {Recent developments at the ILL (n,\&\#947;)-facility}, series = {Journal of Physics G. 14 (1988), H. S}, journal = {Journal of Physics G. 14 (1988), H. S}, isbn = {0305-4616}, pages = {S161 -- S165}, year = {1988}, language = {en} } @article{HoylerBauskeArias1993, author = {Hoyler, Friedrich and Bauske, I. and Arias, J. M.}, title = {First observation of scissors mode states in an odd-mass nucleus / I. Bauske ; J. M. Arias ... F. Hoyler ...}, series = {Physical review letters. 71 (1993), H. 7}, journal = {Physical review letters. 71 (1993), H. 7}, isbn = {0031-9007}, pages = {975 -- 978}, year = {1993}, language = {en} } @article{HoylerBalodisProkofjevs1998, author = {Hoyler, Friedrich and Balodis, M. and Prokofjevs, P.}, title = {Level scheme of 194Ir / M. Balodis ; P. Prokofjevs ... F. Hoyler ...}, series = {Nuclear physics / A. 641 (1998), H. 2}, journal = {Nuclear physics / A. 641 (1998), H. 2}, isbn = {0375-9474}, pages = {133 -- 187}, year = {1998}, language = {en} } @article{HoylerAprahamianWuetal.2006, author = {Hoyler, Friedrich and Aprahamian, A. and Wu, X. and Lesher, S. R.}, title = {Complete spectroscopy of the 162Dy nucleus / Aprahamian, A. ; Wu, X. ; Lesher, S. R. ; Warner, D. D. ; Gelletly, W. ; B{\"o}rner, H. G. ; Hoyler, F. ; Schreckenbach, K. ; Carsten R. F. ; Shi, Z. R. ; Kusnezov, D. ; Ibrahim, M. ; Macchiavelli, A. O. ; Brinkman}, series = {Nuclear physics / A. 764 (2006)}, journal = {Nuclear physics / A. 764 (2006)}, isbn = {0375-9474}, pages = {42 -- 78}, year = {2006}, language = {en} } @article{HoylerAndrejtscheffPetkov1986, author = {Hoyler, Friedrich and Andrejtscheff, W. and Petkov, P.}, title = {A mixed symmetry or quasineutron pair interpretation of the Kpi =03+ level in 172Yb / W. Andrejtscheff ; P. Petkov ... F. Hoyler}, series = {Journal of physics / G. 12 (1986), H. 6}, journal = {Journal of physics / G. 12 (1986), H. 6}, isbn = {0305-4616}, pages = {L151 -- L156}, year = {1986}, language = {en} } @article{Hoyler1985, author = {Hoyler, Friedrich}, title = {Microscopic and semimicroscopic analysis of the reaction 27al- (p,\#ga)24mg in the energy range between 20 and 45 mev}, series = {Physical review / C, nuclear physics. 31 (1985), H. 1}, journal = {Physical review / C, nuclear physics. 31 (1985), H. 1}, isbn = {0556-2813}, pages = {17}, year = {1985}, language = {en} } @article{HoughNalwalkDingetal.2015, author = {Hough, Lindsay B. and Nalwalk, Julia W. and Ding, Xinxin and Scheer, Nico}, title = {Opioid Analgesia in P450 Gene Cluster Knockout Mice: A Search for Analgesia-Relevant Isoforms}, series = {Drug Metabolism and Disposition}, volume = {43}, journal = {Drug Metabolism and Disposition}, number = {9}, issn = {1521-009x}, doi = {10.1124/dmd.115.065490}, pages = {1326 -- 1330}, year = {2015}, language = {en} } @article{HoskensRoerTolstikhinetal.2000, author = {Hoskens, R.C.P. and Roer, T.G. van de and Tolstikhin, V.I. and F{\"o}rster, Arnold}, title = {Hot electron injection laser: vertically integrated transistor-laser structure for high-speed, low-chirp direct modulation}, series = {LEOS 2000 : 2000 IEEE annual meeting conference proceedings; 13th annual meeting; IEEE Lasers and Electro-Optics Society 2000 annual meeting; 13-16 November 2000, The Westin Rio Mar Beach, Rio Grande, Puerto Rico. Vol. 2}, journal = {LEOS 2000 : 2000 IEEE annual meeting conference proceedings; 13th annual meeting; IEEE Lasers and Electro-Optics Society 2000 annual meeting; 13-16 November 2000, The Westin Rio Mar Beach, Rio Grande, Puerto Rico. Vol. 2}, publisher = {IEEE Service Center}, address = {Piscataway, NJ}, isbn = {0-7803-5947-X}, pages = {444 -- 445}, year = {2000}, language = {en} } @article{HoskensTolstikhinFoersteretal.2000, author = {Hoskens, R. C. P. and Tolstikhin, V.I. and F{\"o}rster, Arnold and Roer, T.G. van de}, title = {Vertically integrated transistor-laser structure, take 2}, series = {WOCSDICE 2000, 24th Workshop on Compound Semiconductor Devices and Integrated Circuits held in Europe : May 29 - June 02, 2000, Aegean Sea, Greece.}, journal = {WOCSDICE 2000, 24th Workshop on Compound Semiconductor Devices and Integrated Circuits held in Europe : May 29 - June 02, 2000, Aegean Sea, Greece.}, publisher = {Univ. of Michigan}, address = {Ann Arbor, Mich.}, isbn = {0970311109}, pages = {Getr. Z{\"a}hlung [ca. 200 S.]}, year = {2000}, language = {en} } @article{HorstmannBialonskiNoenningetal.2010, author = {Horstmann, Marie-Therese and Bialonski, Stephan and Noenning, Nina and Mai, Heinke and Prusseit, Jens and Wellmer, J{\"o}rg and Hinrichs, Hermann and Lehnertz, Klaus}, title = {State dependent properties of epileptic brain networks: Comparative graph-theoretical analyses of simultaneously recorded EEG and MEG}, series = {Clinical Neurophysiology}, volume = {121}, journal = {Clinical Neurophysiology}, number = {2}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1388-2457}, doi = {10.1016/j.clinph.2009.10.013}, pages = {172 -- 185}, year = {2010}, abstract = {Objective To investigate whether functional brain networks of epilepsy patients treated with antiepileptic medication differ from networks of healthy controls even during the seizure-free interval. Methods We applied different rules to construct binary and weighted networks from EEG and MEG data recorded under a resting-state eyes-open and eyes-closed condition from 21 epilepsy patients and 23 healthy controls. The average shortest path length and the clustering coefficient served as global statistical network characteristics. Results Independent on the behavioral condition, epileptic brains exhibited a more regular functional network structure. Similarly, the eyes-closed condition was characterized by a more regular functional network structure in both groups. The amount of network reorganization due to behavioral state changes was similar in both groups. Consistent findings could be achieved for networks derived from EEG but hardly from MEG recordings, and network construction rules had a rather strong impact on our findings. Conclusions Despite the locality of the investigated processes epileptic brain networks differ in their global characteristics from non-epileptic brain networks. Further methodological developments are necessary to improve the characterization of disturbed and normal functional networks. Significance An increased regularity and a diminished modulation capability appear characteristic of epileptic brain networks.}, language = {en} } @article{HorbachStaatPerezVianaetal.2020, author = {Horbach, Andreas and Staat, Manfred and Perez-Viana, Daniel and Simmen, Hans-Peter and Neuhaus, Valentin and Pape, Hans-Christoph and Prescher, Andreas and Ciritsis, Bernhard}, title = {Biomechanical in vitro examination of a standardized low-volume tubular femoroplasty}, series = {Clinical Biomechanics}, volume = {80}, journal = {Clinical Biomechanics}, number = {Art. 105104}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.1016/j.clinbiomech.2020.105104}, year = {2020}, abstract = {Background Osteoporosis is associated with the risk of fractures near the hip. Age and comorbidities increase the perioperative risk. Due to the ageing population, fracture of the proximal femur also proves to be a socio-economic problem. Preventive surgical measures have hardly been used so far. Methods 10 pairs of human femora from fresh cadavers were divided into control and low-volume femoroplasty groups and subjected to a Hayes fall-loading fracture test. The results of the respective localization and classification of the fracture site, the Singh index determined by computed tomography (CT) examination and the parameters in terms of fracture force, work to fracture and stiffness were evaluated statistically and with the finite element method. In addition, a finite element parametric study with different position angles and variants of the tubular geometry of the femoroplasty was performed. Findings Compared to the control group, the work to fracture could be increased by 33.2\%. The fracture force increased by 19.9\%. The used technique and instrumentation proved to be standardized and reproducible with an average poly(methyl methacrylate) volume of 10.5 ml. The parametric study showed the best results for the selected angle and geometry. Interpretation The cadaver studies demonstrated the biomechanical efficacy of the low-volume tubular femoroplasty. The numerical calculations confirmed the optimal choice of positioning as well as the inner and outer diameter of the tube in this setting. The standardized minimally invasive technique with the instruments developed for it could be used in further comparative studies to confirm the measured biomechanical results.}, language = {en} } @article{HorbachStaat2018, author = {Horbach, Andreas and Staat, Manfred}, title = {Optical strain measurement for the modeling of surgical meshes and their porosity}, series = {Current Directions in Biomedical Engineering}, volume = {Band 4}, journal = {Current Directions in Biomedical Engineering}, number = {1}, publisher = {De Gruyter}, address = {Berlin}, issn = {2364-5504}, doi = {10.1515/cdbme-2018-0045}, pages = {181 -- 184}, year = {2018}, abstract = {The porosity of surgical meshes makes them flexible for large elastic deformation and establishes the healing conditions of good tissue in growth. The biomechanic modeling of orthotropic and compressible materials requires new materials models and simulstaneoaus fit of deformation in the load direction as well as trannsversely to to load. This nonlinear modeling can be achieved by an optical deformation measurement. At the same time the full field deformation measurement allows the dermination of the change of porosity with deformation. Also the socalled effective porosity, which has been defined to asses the tisssue interatcion with the mesh implants, can be determined from the global deformation of the surgical meshes.}, language = {en} } @article{HorbachDuongStaat2017, author = {Horbach, Andreas and Duong, Minh Tuan and Staat, Manfred}, title = {Modelling of compressible and orthotropic surgical mesh implants based on optical deformation measurement}, series = {Journal of the mechanical behavior of biomedical materials}, volume = {74}, journal = {Journal of the mechanical behavior of biomedical materials}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1751-6161}, doi = {10.1016/j.jmbbm.2017.06.012}, pages = {400 -- 410}, year = {2017}, language = {en} } @article{HonarvarfardGamellaPoghossianetal.2017, author = {Honarvarfard, Elham and Gamella, Maria and Poghossian, Arshak and Sch{\"o}ning, Michael Josef and Katz, Evgeny}, title = {An enzyme-based reversible Controlled NOT (CNOT) logic gate operating on a semiconductor transducer}, series = {Applied Materials Today}, volume = {9}, journal = {Applied Materials Today}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2352-9407}, doi = {10.1016/j.apmt.2017.08.003}, pages = {266 -- 270}, year = {2017}, abstract = {An enzyme-based biocatalytic system mimicking operation of a logically reversible Controlled NOT (CNOT) gate has been interfaced with semiconductor electronic transducers. Electrolyte-insulator-semiconductor (EIS) structures have been used to transduce chemical changes produced by the enzyme system to an electronically readable capacitive output signal using field-effect features of the EIS device. Two enzymes, urease and esterase, were immobilized on the insulating interface of EIS structure producing local pH changes performing XOR logic operation controlled by various combinations of the input signals represented by urea and ethyl butyrate. Another EIS transducer was functionalized with esterase only, thus performing Identity (ID) logic operation for the ethyl butyrate input. Both semiconductor devices assembled in parallel operated as a logically reversible CNOT gate. The present system, despite its simplicity, demonstrated for the first time logically reversible function of the enzyme system transduced electronically with the semiconductor devices. The biomolecular realization of a CNOT gate interfaced with semiconductors is promising for integration into complex biomolecular networks and future biosensor/biomedical applications.}, language = {en} } @article{HonarvarfardGamellaChannaveerappaetal.2017, author = {Honarvarfard, Elham and Gamella, Maria and Channaveerappa, Devika and Darie, Costel C. and Poghossian, Arshak and Sch{\"o}ning, Michael Josef and Katz, Evgeny}, title = {Electrochemically Stimulated Insulin Release from a Modified Graphene-functionalized Carbon Fiber Electrode}, series = {Electroanalysis}, volume = {29}, journal = {Electroanalysis}, number = {6}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1521-4109}, doi = {10.1002/elan.201700095}, pages = {1543 -- 1553}, year = {2017}, abstract = {A graphene-functionalized carbon fiber electrode was modified with adsorbed polyethylenimine to introduce amino functionalities and then with trigonelline and 4-carboxyphenylboronic acid covalently bound to the amino groups. The trigonelline species containing quarterized pyridine groups produced positive charge on the electrode surface regardless of the pH value, while the phenylboronic acid species were neutral below pH 8 and negatively charged above pH 9 (note that their pKa=8.4). The total charge on the monolayer-modified electrode was positive at the neutral pH and negative at pH > 9. Note that 4-carboxyphenylboronic acid was attached to the electrode surface in molar excess to trigonelline, thus allowing the negative charge to dominate on the electrode surface at basic pH. Negatively charged fluorescent dye-labeled insulin (insulin-FITC) was loaded on the modified electrode surface at pH 7.0 due to its electrostatic attraction to the positively charged interface. The local pH in close vicinity to the electrode surface was increased to ca. 9-10 due to consumption of H+ ions upon electrochemical reduction of oxygen proceeding at the potential of -1.0 V (vs. Ag/AgCl) applied on the modified electrode. The process resulted in recharging of the electrode surface to the negative value due to the formation of the negative charge on the phenylboronic acid groups, thus resulting in the electrostatic repulsion of insulin-FITC and stimulating its release from the electrode surface. The insulin release was characterized by fluorescence spectroscopy (using the FITC-labeled insulin), by electrochemical measurements on an iridium oxide, IrOx, electrode and by mass spectrometry. The graphene-functionalized carbon fiber electrode demonstrated significant advantages in the signal-stimulated insulin release comparing with the carbon fiber electrode without the graphene species.}, language = {en} } @article{HoltschoppenButenwegMeskouris2009, author = {Holtschoppen, Britta and Butenweg, Christoph and Meskouris, Konstantin}, title = {Seismic design of non-structural components in industrial facilities}, series = {International journal of engineering under uncertainty}, volume = {Volume 1}, journal = {International journal of engineering under uncertainty}, issn = {0975-4806}, pages = {1 -- 13}, year = {2009}, language = {en} } @article{HoltschoppenButenwegMeskouris2009, author = {Holtschoppen, B. and Butenweg, Christoph and Meskouris, Konstantin}, title = {Erdbebensichere Auslegung von Industrieanlagen}, series = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik}, journal = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik}, number = {M{\"a}rz}, publisher = {VDI Fachmedien}, address = {D{\"u}sseldorf}, issn = {0005-6650}, pages = {S9 -- S14}, year = {2009}, language = {de} } @article{HoltrupSadeghfamHeuermannetal.2014, author = {Holtrup, S. and Sadeghfam, Arash and Heuermann, Holger and Awakowicz, P.}, title = {Characterization and optimization technique for microwave-driven high-intensity discharge lamps using hot S-parameters}, series = {IEEE transactions on microwave theories and techniques}, volume = {62}, journal = {IEEE transactions on microwave theories and techniques}, number = {10}, publisher = {IEEE}, address = {New York}, issn = {0018-9480}, doi = {10.1109/TMTT.2014.2342652}, pages = {2471 -- 2480}, year = {2014}, abstract = {High-intensity discharge lamps can be driven by radio-frequency signals in the ISM frequency band at 2.45 GHz, using a matching network to transform the impedance of the plasma to the source impedance. To achieve an optimal operating condition, a good characterization of the lamp in terms of radio frequency equivalent circuits under operating conditions is necessary, enabling the design of an efficient matching network. This paper presents the characterization technique for such lamps and presents the design of the required matching network. For the characterization, a high-intensity discharge lamp was driven by a monofrequent large signal at 2.45 GHz, whereas a frequency sweep over 300 MHz was performed across this signal to measure so-called small-signal hot S-parameters using a vector network analyzer. These parameters are then used as an equivalent load in a circuit simulator to design an appropriate matching network. Using the measured data as a black-box model in the simulation results in a quick and efficient method to simulate and design efficient matching networks in spite of the complex plasma behavior. Furthermore, photometric analysis of high-intensity discharge lamps are carried out, comparing microwave operation to conventional operation.}, language = {en} } @article{HolthausSellheierHasselmann2007, author = {Holthaus-Sellheier, Ursula and Hasselmann, Willi}, title = {Die Bedeutung der Baukosten f{\"u}r Wirtschaftlichkeitsbetrachtungen und die Projektentwicklung / Hasselmann, Willi ; Holthaus Ursula}, series = {Kosten im Hochbau : Praxis-Handbuch und Kommentar zur DIN 276 ; mit 23 Tabellen / Autoren: Bert Bielefeld ... Hrsg.: Udo Blecken ...}, journal = {Kosten im Hochbau : Praxis-Handbuch und Kommentar zur DIN 276 ; mit 23 Tabellen / Autoren: Bert Bielefeld ... Hrsg.: Udo Blecken ...}, publisher = {M{\"u}ller}, address = {K{\"o}ln}, isbn = {978-3-481-02245-7}, pages = {125 -- 157}, year = {2007}, language = {de} } @article{HolthausSellheierBoenert2003, author = {Holthaus-Sellheier, Ursula and Boenert, Lothar}, title = {Alternative Brandschutzkonstruktionen f{\"u}hren zu Kostenreduzierungen / Boenert, Lothar ; Holthaus, Ursula}, series = {Trockenbau, Akustik : Magazin f{\"u}r Planung und Ausf{\"u}hrung (2003)}, journal = {Trockenbau, Akustik : Magazin f{\"u}r Planung und Ausf{\"u}hrung (2003)}, isbn = {0179-8006}, pages = {30 -- 33}, year = {2003}, language = {de} } @article{HolthausSellheierBleckenMeinen2004, author = {Holthaus-Sellheier, Ursula and Blecken, Udo and Meinen, Heiko}, title = {Vergabeentscheidung und Wirtschaftlichkeitsberechnung von PPP/PFI-Projekten in der Bauwirtschaft / Udo Blecken, Heiko Meinen, Ursula Holthaus}, series = {Bautechnik: Zeitschrift f{\"u}r den gesamten Ingenieurbau. 81 (2004), H. 8}, journal = {Bautechnik: Zeitschrift f{\"u}r den gesamten Ingenieurbau. 81 (2004), H. 8}, isbn = {1437-0999}, pages = {648 -- 657}, year = {2004}, language = {de} } @article{HolthausSellheierBleckenGralla2007, author = {Holthaus-Sellheier, Ursula and Blecken, Udo and Gralla, Mike}, title = {PPP-Projekte: Strukturelle Kostenvergleichsuntersuchungen zwischen Eigenrealisierung der {\"o}ffentlichen Auftraggeber und PPP-Anbietern / Blecken, Udo ; Gralla, Mike ; Holthaus, Ursula}, series = {Bautechnik. 84 (2007), H. 1}, journal = {Bautechnik. 84 (2007), H. 1}, isbn = {0932-8351}, pages = {25 -- 34}, year = {2007}, language = {de} } @article{HolthausSellheierBlecken2004, author = {Holthaus-Sellheier, Ursula and Blecken, Udo}, title = {Marktdatenbasiertes Ertragsprognosemodell f{\"u}r die Projektentwicklung / Blecken, Udo; Holthaus, Ursula}, series = {Baubetrieb und Bauwirtschaft - Festschrift Prof. Gert Stadler}, journal = {Baubetrieb und Bauwirtschaft - Festschrift Prof. Gert Stadler}, publisher = {Verlag der TU Graz}, address = {Graz}, isbn = {3-902465-09-3}, pages = {251 -- 269}, year = {2004}, language = {de} } @article{HolthausSellheierBlecken2008, author = {Holthaus-Sellheier, Ursula and Blecken, Udo}, title = {Nutzenkosten: DIN 18960-2008 - Leistungsf{\"a}hige Grundlage f{\"u}r die zielorientierte Planung der Lebenszykluskosten / Blecken, Udo ; Holthaus-Sellheier, Ursula}, series = {Bautechnik. 85 (2008), H. 7}, journal = {Bautechnik. 85 (2008), H. 7}, isbn = {1437-0999}, pages = {464 -- 471}, year = {2008}, language = {de} } @article{HolthausSellheier2004, author = {Holthaus-Sellheier, Ursula}, title = {Senkung der Baukosten und Reduzierung der Preisunsicherheit mit Hilfe der Risikoabwicklung {\"u}ber die Optionspreistheorie mit Realoptionen}, series = {Risikomanagement in der Bauwirtschaft : Tagungsband / Baubetriebs- und Bauwirtschaftssymposium 02. April 2004. [Hrsg.: Technische Universit{\"a}t Graz, Institut f{\"u}r Baubetrieb und Bauwirtschaft. Red.: Reinhild N{\"o}stlthaller ... ]}, journal = {Risikomanagement in der Bauwirtschaft : Tagungsband / Baubetriebs- und Bauwirtschaftssymposium 02. April 2004. [Hrsg.: Technische Universit{\"a}t Graz, Institut f{\"u}r Baubetrieb und Bauwirtschaft. Red.: Reinhild N{\"o}stlthaller ... ]}, publisher = {Verl. der Techn. Univ.}, address = {Graz}, isbn = {3-901351-91-4}, pages = {103 -- 114}, year = {2004}, language = {de} } @article{HollerButenwegNohetal.2004, author = {Holler, S. and Butenweg, Christoph and Noh, S.-Y. and Meskouris, Konstantin}, title = {Computational model of textile-reinforced concrete structures}, series = {Computers \& structures : an international journal}, volume = {Volume 82}, journal = {Computers \& structures : an international journal}, number = {Issues 23-26}, issn = {1879-2243 (E-Journal); 0045-7949 (Print)}, doi = {10.1016/j.compstruc.2004.03.076}, pages = {1971 -- 1979}, year = {2004}, language = {en} } @article{HofmannLimpertMatareetal.2018, author = {Hofmann, Till and Limpert, Nicolas and Matar{\´e}, Victor and Sch{\"o}nitz, Sebastian and Niemueller, Tim and Ferrein, Alexander and Lakemeyer, Gerhard}, title = {The Carologistics RoboCup Logistics Team 2018}, year = {2018}, abstract = {The Carologistics team participates in the RoboCup Logistics League for the seventh year. The RCLL requires precise vision, manipulation and path planning, as well as complex high-level decision making and multi-robot coordination. We outline our approach with an emphasis on recent modifications to those components. The team members in 2018 are David Bosen, Christoph Gollok, Mostafa Gomaa, Daniel Habering, Till Hofmann, Nicolas Limpert, Sebastian Sch{\"o}nitz, Morian Sonnet, Carsten Stoffels, and Tarik Viehmann. This paper is based on the last year's team description.}, language = {en} } @article{HoffstadtPohenDickeetal.2020, author = {Hoffstadt, Kevin and Pohen, Gino D. and Dicke, Max D. and Paulsen, Svea and Krafft, Simone and Zang, Joachim W. and Fonseca-Zang, Warde A. da and Leite, Athaydes and Kuperjans, Isabel}, title = {Challenges and prospects of biogas from energy cane as supplement to bioethanol production}, series = {Agronomy}, volume = {10}, journal = {Agronomy}, number = {6}, publisher = {MDPI}, address = {Basel}, issn = {2073-4395}, doi = {10.3390/agronomy10060821}, year = {2020}, abstract = {Innovative breeds of sugar cane yield up to 2.5 times as much organic matter as conventional breeds, resulting in a great potential for biogas production. The use of biogas production as a complementary solution to conventional and second-generation ethanol production in Brazil may increase the energy produced per hectare in the sugarcane sector. Herein, it was demonstrated that through ensiling, energy cane can be conserved for six months; the stored cane can then be fed into a continuous biogas process. This approach is necessary to achieve year-round biogas production at an industrial scale. Batch tests revealed specific biogas potentials between 400 and 600 LN/kgVS for both the ensiled and non-ensiled energy cane, and the specific biogas potential of a continuous biogas process fed with ensiled energy cane was in the same range. Peak biogas losses through ensiling of up to 27\% after six months were observed. Finally, compared with second-generation ethanol production using energy cane, the results indicated that biogas production from energy cane may lead to higher energy yields per hectare, with an average energy yield of up to 162 MWh/ha. Finally, the Farm²CBG concept is introduced, showing an approach for decentralized biogas production.}, language = {en} } @article{HoffstadtNikolauszKrafftetal.2024, author = {Hoffstadt, Kevin and Nikolausz, Marcell and Krafft, Simone and Bonatelli, Maria and Kumar, Vivekanantha and Harms, Hauke and Kuperjans, Isabel}, title = {Optimization of the ex situ biomethanation of hydrogen and carbon dioxide in a novel meandering plug flow reactor: start-up phase and flexible operation}, series = {Bioengineering}, volume = {11}, journal = {Bioengineering}, number = {2}, publisher = {MDPI}, address = {Basel}, issn = {2306-5354}, doi = {10.3390/bioengineering11020165}, pages = {18 Seiten}, year = {2024}, language = {en} } @article{HoffschmidtTellezValverdeetal.2003, author = {Hoffschmidt, Bernhard and T{\´e}llez, F{\´e}lix M. and Valverde, Antonio and Fernandez, Valerio and Fernandez, Jesus}, title = {Performance evaluation of the 200-kWth HiTRec-II open volumetric air receiver}, series = {Journal of solar energy engineering}, volume = {Vol. 125}, journal = {Journal of solar energy engineering}, number = {Iss. 1}, pages = {87 -- 94}, year = {2003}, language = {en} } @article{HoffschmidtRiffelmannKroedeletal.2001, author = {Hoffschmidt, Bernhard and Riffelmann, K.-J. and Kr{\"o}del, M. and Rietbrock, P.}, title = {PHITREC - pressurized volumetric air receiver for high temperature solar applications / K.-J. Riffelmann ; B. Hofschmidt ...}, series = {Forschungsbericht : DLR FB. 10 (2001)}, journal = {Forschungsbericht : DLR FB. 10 (2001)}, isbn = {0939-2963}, pages = {73 -- 74}, year = {2001}, language = {en} } @article{HoffschmidtPitzPaalBoehmer1999, author = {Hoffschmidt, Bernhard and Pitz-Paal, Robert and B{\"o}hmer, M.}, title = {A new closed/open volumetric receiver concept for parabolictrough collectors (test results)}, series = {Journal de physique. 9 (1999), H. 3}, journal = {Journal de physique. 9 (1999), H. 3}, isbn = {1155-4339}, pages = {3}, year = {1999}, language = {en} } @article{HoffschmidtPitzPaalHennecke1999, author = {Hoffschmidt, Bernhard and Pitz-Paal, R. and Hennecke, K.}, title = {Solare Heißlufterzeugung f{\"u}r Temperaturen bis {\"u}ber 250 Grad C}, series = {Tagung M{\"u}nchen, 16. und 17. M{\"a}rz 1999 . 1999. - (VDI-Berichte ; 1457)}, journal = {Tagung M{\"u}nchen, 16. und 17. M{\"a}rz 1999 . 1999. - (VDI-Berichte ; 1457)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-091457-2}, pages = {323 -- 332}, year = {1999}, language = {de} } @article{HoffschmidtPitzPaalBoehmer1997, author = {Hoffschmidt, Bernhard and Pitz-Paal, R. and B{\"o}hmer, M.}, title = {Experimental and numerical evaluation of the performance and flow stability of different types of open volumetric absorbers under non-homogeneous irradiation / R. Pitz-Pahl ; B. Hofschmidt ; M. B{\"o}hmer ...}, series = {Solar energy. 60 (1997), H. 3-4}, journal = {Solar energy. 60 (1997), H. 3-4}, isbn = {0038-092X}, pages = {135 -- 150}, year = {1997}, language = {en} } @article{HoffschmidtKruegerHennecke2000, author = {Hoffschmidt, Bernhard and Kr{\"u}ger, D. and Hennecke, K.}, title = {Results from parabolic trough systems for process heat at the DLR Cologne / D. Kr{\"u}ger ; B. Hoffschmidt ; K. Hennecke ...}, series = {Solar thermal 2000 : proceedings of the 10th SolarPACES International Symposium on Solar Thermal Concentrating Technologies, Sydney, Australia, 8 - 10 March 2000 ; part of the}, journal = {Solar thermal 2000 : proceedings of the 10th SolarPACES International Symposium on Solar Thermal Concentrating Technologies, Sydney, Australia, 8 - 10 March 2000 ; part of the}, address = {Sydney}, pages = {113 -- 120}, year = {2000}, language = {en} } @article{HoffschmidtKroedelGeigl2002, author = {Hoffschmidt, Bernhard and Kr{\"o}del, Matthias and Geigl, Florian}, title = {Die Kraft der Sonne / Matthias Kr{\"o}del ; Florian Geigl ; Bernhard Hoffschmidt}, series = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2002)}, journal = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2002)}, isbn = {0937-0420}, pages = {18 -- 19}, year = {2002}, language = {de} } @article{HoffschmidtKoll2005, author = {Hoffschmidt, Bernhard and Koll, Gerrit}, title = {Die Zukunft der Stromerzeugung ; die Entwicklung der Luftreceivertechnologie bei Kraftanlagen M{\"u}nchen / Gerrit Koll ; Berhard Hoffschmidt}, series = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2005)}, journal = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2005)}, isbn = {0937-0420}, pages = {42 -- 46}, year = {2005}, language = {de} } @article{HoffschmidtFernandezKonstandopoulus2001, author = {Hoffschmidt, Bernhard and Fernandez, V. and Konstandopoulus, A. G.}, title = {Development of ceramic volumetric receiver technology}, series = {Forschungsbericht : DLR FB. 10 (2001)}, journal = {Forschungsbericht : DLR FB. 10 (2001)}, isbn = {0939-2963}, pages = {51 -- 61}, year = {2001}, language = {en} } @article{HoffschmidtFendPitzPaaletal.2004, author = {Hoffschmidt, Bernhard and Fend, Thomas and Pitz-Paal, Robert and Reutter, Oliver}, title = {Two novel high-porosity materials as volumetric receivers for concentrated solar radiation / Thomas Fend ; Robert Pitz-Paal ; Oliver Reutter ... Bernhard Hoffschmidt}, series = {Solar energy materials \& solar cells. 84 (2004), H. 1}, journal = {Solar energy materials \& solar cells. 84 (2004), H. 1}, isbn = {0927-0248}, pages = {291 -- 304}, year = {2004}, language = {en} } @article{HoffschmidtFendPitzPaaletal.2004, author = {Hoffschmidt, Bernhard and Fend, Thomas and Pitz-Paal, Robert and Reutter, Oliver}, title = {Porous materials as open volumetric solar receivers - Experimental determination of thermophysical and heat transfer properties / Thomas Fend ; Bernhard Hoffschmidt ...}, series = {Energy. 29 (2004), H. 5}, journal = {Energy. 29 (2004), H. 5}, isbn = {0360-5442}, pages = {823 -- 834}, year = {2004}, language = {en} } @article{HoffschmidtFendJorgensenetal.2003, author = {Hoffschmidt, Bernhard and Fend, Thomas and Jorgensen, Gary and K{\"u}ster, Harald}, title = {Comparative assessment of solar concentrator materials / Fend, Thomas ; Hoffschmidt, Bernhard ; Jorgensen, Gary ; K{\"u}ster, Harald ; Kr{\"u}ger, Dirk ; Pitz-Paal, Robert ; Riebrock, Peter ; Riffelmann, Klaus-J{\"u}rgen}, series = {Solar energy. 74 (2003), H. 2}, journal = {Solar energy. 74 (2003), H. 2}, isbn = {0038-092X}, pages = {149 -- 155}, year = {2003}, language = {en} } @article{HoffschmidtFendJorgensen2002, author = {Hoffschmidt, Bernhard and Fend, Thomas and Jorgensen, Gary}, title = {Comparative assessment of solar concentrator materials / Thomas Fend ; Bernhard Hoffschmidt ; Gary Jorgensen ...}, series = {Renewable energy for local communities of Europe : (toward Rio+10) ; proceedings / EuroSun 2002, the 4th ISES Europe Solar Congress ; Bologna (Italy), 23 - 26 June 2002 / ISES Italia}, journal = {Renewable energy for local communities of Europe : (toward Rio+10) ; proceedings / EuroSun 2002, the 4th ISES Europe Solar Congress ; Bologna (Italy), 23 - 26 June 2002 / ISES Italia}, address = {Bologna}, isbn = {88-900893-0-X}, pages = {paper_125.pdf}, year = {2002}, language = {en} } @article{HoffschmidtBuckFend2001, author = {Hoffschmidt, Bernhard and Buck, R. and Fend, Thomas}, title = {Porous materials as volumetric solar receivers : experimental approach towards a detailed characterisation of instability problems / R. Buck ; T. Fend ; B. Hoffschmidt ...}, series = {Forschungsbericht : DLR FB. 10 (2001)}, journal = {Forschungsbericht : DLR FB. 10 (2001)}, isbn = {0939-2963}, pages = {71 -- 72}, year = {2001}, language = {en} } @article{HoffschmidtBeckerFend2006, author = {Hoffschmidt, Bernhard and Becker, M. and Fend, Thomas}, title = {Theoretical and numerical investigation of flow stability in porous materials applied as volumetric solar receivers / M. Becker ; T. Fend ; B. Hoffschmidt ...}, series = {Solar energy. 80 (2006), H. 10}, journal = {Solar energy. 80 (2006), H. 10}, isbn = {0038-092X}, pages = {1241 -- 1248}, year = {2006}, language = {en} } @article{Hoffschmidt2000, author = {Hoffschmidt, Bernhard}, title = {Keramische Mischer : {\"U}berhitzung ausgeschlossen}, series = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2000)}, journal = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2000)}, isbn = {0937-0420}, pages = {26 -- 27}, year = {2000}, language = {de} } @article{Hoffschmidt2004, author = {Hoffschmidt, Bernhard}, title = {Das Solar-Institut J{\"u}lich an der Fachhochschule Aachen}, series = {Regenerative Energien in Deutschland und in Polen : Aspekte im Hinblick auf den EU-Beitritt Polens ; 6./7. Mai 2004, Lodz/Polen ; Tagungsband / VDI-Gesellschaft Energietechnik. 1. - Aufl.}, journal = {Regenerative Energien in Deutschland und in Polen : Aspekte im Hinblick auf den EU-Beitritt Polens ; 6./7. Mai 2004, Lodz/Polen ; Tagungsband / VDI-Gesellschaft Energietechnik. 1. - Aufl.}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-931384-47-0}, pages = {277 -- 280}, year = {2004}, language = {de} } @article{Hoffschmidt2008, author = {Hoffschmidt, Bernhard}, title = {Jenseits von Spanien. Das Solarthermische Versuchs- und Demonstrationskraftwerk J{\"u}lich (STJ)}, series = {DLR-Nachrichten (2008)}, journal = {DLR-Nachrichten (2008)}, isbn = {0937-0420}, pages = {38 -- 39}, year = {2008}, language = {de} } @article{HoffmannSchermutzkiWinckelmannSchlieper2010, author = {Hoffmann, Ulrich and Schermutzki, Margret and Winckelmann-Schlieper, Katja}, title = {Kompetenzbasierte Verzahnung von berufspraktischem und wissenschaftlichem Lernen : Der Studiengang Prozesstechnik der FH Aachen}, series = {Berufsbildung in Wissenschaft und Praxis (BWP). 39 (2010), H. 2}, journal = {Berufsbildung in Wissenschaft und Praxis (BWP). 39 (2010), H. 2}, isbn = {0341-4515}, pages = {32 -- 36}, year = {2010}, language = {de} } @article{Hoffmann2008, author = {Hoffmann, Ulrich}, title = {Neue Wege in die Hochschule - Beispiel des berufsbegleitenden Studienganges Prozesstechnik der FH Aachen und der Rhein-Erft Akademie}, series = {HIS: Forum Hochschule. 2008 (2008), H. F14}, journal = {HIS: Forum Hochschule. 2008 (2008), H. F14}, isbn = {1863-5563}, pages = {130 -- 138}, year = {2008}, language = {de} } @article{HoffmannLindemannZimmermann1998, author = {Hoffmann, C. P. and Lindemann, Markus and Zimmermann, Hans-Dieter}, title = {Logistik-Ressourcen im World Wide Web}, series = {Wirtschaftsinformatik. Vol. 40 (1998), iss. 3}, journal = {Wirtschaftsinformatik. Vol. 40 (1998), iss. 3}, issn = {0937-6429}, pages = {245 -- 250}, year = {1998}, language = {de} } @article{HoffmannUhlCeblinetal.2022, author = {Hoffmann, Andreas and Uhl, Matthias and Ceblin, Maximilian and Rohrbach, Felix and Bansmann, Joachim and Mallah, Marcel and Heuermann, Holger and Jacob, Timo and Kuehne, Alexander J.C.}, title = {Atmospheric pressure plasma-jet treatment of PAN-nonwovens—carbonization of nanofiber electrodes}, series = {C - Journal of Carbon Research}, volume = {8}, journal = {C - Journal of Carbon Research}, number = {3}, publisher = {MDPI}, address = {Basel}, issn = {2311-5629}, doi = {10.3390/c8030033}, pages = {8 Seiten}, year = {2022}, abstract = {Carbon nanofibers are produced from dielectric polymer precursors such as polyacrylonitrile (PAN). Carbonized nanofiber nonwovens show high surface area and good electrical conductivity, rendering these fiber materials interesting for application as electrodes in batteries, fuel cells, and supercapacitors. However, thermal processing is slow and costly, which is why new processing techniques have been explored for carbon fiber tows. Alternatives for the conversion of PAN-precursors into carbon fiber nonwovens are scarce. Here, we utilize an atmospheric pressure plasma jet to conduct carbonization of stabilized PAN nanofiber nonwovens. We explore the influence of various processing parameters on the conductivity and degree of carbonization of the converted nanofiber material. The precursor fibers are converted by plasma-jet treatment to carbon fiber nonwovens within seconds, by which they develop a rough surface making subsequent surface activation processes obsolete. The resulting carbon nanofiber nonwovens are applied as supercapacitor electrodes and examined by cyclic voltammetry and impedance spectroscopy. Nonwovens that are carbonized within 60 s show capacitances of up to 5 F g⁻¹.}, language = {en} } @article{HoffmannRohrbachUhletal.2022, author = {Hoffmann, Andreas and Rohrbach, Felix and Uhl, Matthias and Ceblin, Maximilian and Bauer, Thomas and Mallah, Marcel and Jacob, Timo and Heuermann, Holger and Kuehne, Alexander J. C.}, title = {Atmospheric pressure plasma-jet treatment of polyacrylonitrile-nonwovens—Stabilization and roll-to-roll processing}, series = {Journal of Applied Polymer Science}, volume = {139}, journal = {Journal of Applied Polymer Science}, number = {37}, publisher = {Wiley}, issn = {0021-8995 (Print)}, doi = {10.1002/app.52887}, pages = {1 -- 9}, year = {2022}, abstract = {Carbon nanofiber nonwovens represent a powerful class of materials with prospective application in filtration technology or as electrodes with high surface area in batteries, fuel cells, and supercapacitors. While new precursor-to-carbon conversion processes have been explored to overcome productivity restrictions for carbon fiber tows, alternatives for the two-step thermal conversion of polyacrylonitrile precursors into carbon fiber nonwovens are absent. In this work, we develop a continuous roll-to-roll stabilization process using an atmospheric pressure microwave plasma jet. We explore the influence of various plasma-jet parameters on the morphology of the nonwoven and compare the stabilized nonwoven to thermally stabilized samples using scanning electron microscopy, differential scanning calorimetry, and infrared spectroscopy. We show that stabilization with a non-equilibrium plasma-jet can be twice as productive as the conventional thermal stabilization in a convection furnace, while producing electrodes of comparable electrochemical performance.}, language = {en} } @article{HoevelerJanserBindewaldetal.2015, author = {Hoeveler, Bastian and Janser, Frank and Bindewald, Thorsten and Gebhardt, Andreas}, title = {Entwurf, Fertigung und Untersuchung eines Windkanalmodells eines innovativen, senkrechtstartenden Kleinflugzeuges}, series = {RTejournal - Forum f{\"u}r Rapid Technologie}, journal = {RTejournal - Forum f{\"u}r Rapid Technologie}, number = {12}, publisher = {Fachhochschule Aachen}, address = {Aachen}, issn = {1614-0923}, url = {http://nbn-resolving.de/urn:nbn:de:0009-2-42921}, pages = {1 -- 5}, year = {2015}, language = {de} } @article{HoevelerBauknechtWolfetal.2020, author = {Hoeveler, B. and Bauknecht, Andr{\´e} and Wolf, C. Christian and Janser, Frank}, title = {Wind-Tunnel Study of a Wing-Embedded Lifting Fan Remaining Open in Cruise Flight}, series = {Journal of Aircraft}, volume = {57}, journal = {Journal of Aircraft}, number = {4}, publisher = {AIAA}, address = {Reston, Va.}, issn = {1533-3868}, doi = {10.2514/1.C035422}, year = {2020}, abstract = {It is investigated whether a nonrotating lifting fan remaining uncovered during cruise flight, as opposed to being covered by a shutter system, can be realized with limited additional drag and loss of lift during cruise flight. A wind-tunnel study of a wing-embedded lifting fan has been conducted at the Side Wind Test Facility G{\"o}ttingen of DLR, German Aerospace Center in G{\"o}ttingen using force, pressure, and stereoscopic particle image velocimetry techniques. The study showed that a step on the lower side of the wing in front of the lifting fan duct increases the lift-to-drag ratio of the whole model by up to 25\% for all positive angles of attack. Different sizes and inclinations of the step had limited influence on the surface pressure distribution. The data indicate that these parameters can be optimized to maximize the lift-to-drag ratio. A doubling of the curvature radius of the lifting fan duct inlet lip on the upper side of the wing affected the lift-to-drag ratio by less than 1\%. The lifting fan duct inlet curvature can therefore be optimized to maximize the vertical fan thrust of the rotating lifting fan during hovering without affecting the cruise flight performance with a nonrotating fan.}, language = {en} } @article{HoepnerJanz2008, author = {Hoepner, Gert and Janz, Norbert}, title = {Ganzheit als schl{\"u}ssiges System}, series = {Acquisa - Das Magazin f{\"u}r Marketing und Vertieb. 11 (2008), H. 1}, journal = {Acquisa - Das Magazin f{\"u}r Marketing und Vertieb. 11 (2008), H. 1}, isbn = {0938-7927}, pages = {44 -- 47}, year = {2008}, language = {de} } @article{Hoepner2004, author = {Hoepner, Gert}, title = {Info-Web-Generation}, series = {Dm-compact : academic news for marketeers / Deutscher Direktmarketing Verband e. V.. 2 (2004), H. 3-4}, journal = {Dm-compact : academic news for marketeers / Deutscher Direktmarketing Verband e. V.. 2 (2004), H. 3-4}, isbn = {1573-3181}, pages = {14 -- 20}, year = {2004}, language = {en} } @article{Hoepner2006, author = {Hoepner, Gert}, title = {Die Erhebung aussagef{\"a}higer Daten ist kostenintensiv}, series = {Direkt-Marketing : Zeitschrift f{\"u}r Dialogmarketing und Integrierte Kommunikation (2006)}, journal = {Direkt-Marketing : Zeitschrift f{\"u}r Dialogmarketing und Integrierte Kommunikation (2006)}, isbn = {0946-0446}, pages = {15 -- 15}, year = {2006}, language = {de} } @article{Hoepner2006, author = {Hoepner, Gert}, title = {Alumni-Arbeit an der FH Aachen}, series = {Dokumentation / 11. Konferenz der Alumni-Organisationen 12.- 14. Mai 2006, Fachhochschule Aachen}, journal = {Dokumentation / 11. Konferenz der Alumni-Organisationen 12.- 14. Mai 2006, Fachhochschule Aachen}, publisher = {alumni-clubs.net}, address = {Siegen}, isbn = {3-938048-07-7}, pages = {7 -- 17}, year = {2006}, language = {de} } @article{Hoepner2009, author = {Hoepner, Gert}, title = {Ihr Statement bitte : [Vertrauen der Kunden]}, series = {direkt plus (2009)}, journal = {direkt plus (2009)}, pages = {34}, year = {2009}, language = {de} } @article{Hoepner2008, author = {Hoepner, Gert}, title = {City-Cards vor neuem Boom - Erfolgsfaktoren regionaler Mehrwertesysteme}, series = {Direkt-Marketing : Zeitschrift f{\"u}r Dialogmarketing und Integrierte Kommunikation (2008)}, journal = {Direkt-Marketing : Zeitschrift f{\"u}r Dialogmarketing und Integrierte Kommunikation (2008)}, isbn = {0946-0446}, pages = {62 -- 65}, year = {2008}, language = {de} } @article{HoehrPaulssenBenardetal.2014, author = {Hoehr, Cornelia and Paulßen, Elisabeth and Benard, Francois and Lee, Chris Jaeil and Hou, Xinchi and Badesso, Brian and Ferguson, Simon and Miao, Qing and Yang, Hua and Buckley, Ken and Hanemaayer, Victoire and Zeisler, Stefan and Ruth, Thomas and Celler, Anna and Schaffer, Paul}, title = {⁴⁴ᶢSc production using a water target on a 13 MeV cyclotron}, series = {Nuclear medicine and biology}, volume = {41}, journal = {Nuclear medicine and biology}, number = {5}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1872-9614}, doi = {10.1016/j.nucmedbio.2013.12.016}, pages = {401 -- 406}, year = {2014}, abstract = {Access to promising radiometals as isotopes for novel molecular imaging agents requires that they are routinely available and inexpensive to obtain. Proximity to a cyclotron center outfitted with solid target hardware, or to an isotope generator for the metal of interest is necessary, both of which can introduce significant hurdles in development of less common isotopes. Herein, we describe the production of ⁴⁴Sc (t₁⸝₂ = 3.97 h, Eavg,β⁺ = 1.47 MeV, branching ratio = 94.27\%) in a solution target and an automated loading system which allows a quick turn-around between different radiometallic isotopes and therefore greatly improves their availability for tracer development. Experimental yields are compared to theoretical calculations.}, language = {en} } @article{HodelOrzatiMarsoetal.2000, author = {Hodel, U. and Orzati, A. and Marso, M. and Homann, O. and Fox, A. and Hart, A. v. d. and F{\"o}rster, Arnold and Kordos, P. and L{\"u}th, H.}, title = {A novel InAlAs/InGaAs layer structure for monolithically integrated photoreceiver}, series = {Conference Proceedings: 2000 International Conference on Indium Phosphide and related materials}, journal = {Conference Proceedings: 2000 International Conference on Indium Phosphide and related materials}, publisher = {IEEE Service Center}, address = {Piscataway, NJ}, isbn = {0-7803-6320-5}, pages = {466 -- 469}, year = {2000}, language = {en} } @article{HirschfeldLustfeldReisseletal.2010, author = {Hirschfeld, J. A. and Lustfeld, H. and Reißel, Martin and Steffen, B.}, title = {A novel scheme for precise diagnostics and effective stabilization of currents in a fuel cell stack}, series = {International Journal of Energy Research. 34 (2010), H. 3}, journal = {International Journal of Energy Research. 34 (2010), H. 3}, isbn = {0363-907X}, pages = {293 -- 301}, year = {2010}, language = {en} } @article{HirschfeldLustfeldReisseletal.2010, author = {Hirschfeld, J. A. and Lustfeld, H. and Reißel, Martin and Steffen, B.}, title = {Tomographic diagnostics of current distributions in a fuel cell stack}, series = {International Journal of Energy Research}, volume = {34}, journal = {International Journal of Energy Research}, number = {3}, isbn = {0363-907X}, pages = {284 -- 292}, year = {2010}, language = {en} } @article{HirschbergBach2002, author = {Hirschberg, Rainer and Bach, Heinz}, title = {Kurzverfahren zur Bestimmung des Energiebedarfs von Warmwasserheizungen / Bach, Heinz; Hirschberg, Rainer}, series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik ; Zeitschrift des Vereins Deutscher Ingenieure ; Organ der VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung (VDI-TGA) / Hrsg. Verein Deutscher Ingenieure. 53 (2002), H. 10}, journal = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik ; Zeitschrift des Vereins Deutscher Ingenieure ; Organ der VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung (VDI-TGA) / Hrsg. Verein Deutscher Ingenieure. 53 (2002), H. 10}, isbn = {1436-5103}, pages = {22 -- 26}, year = {2002}, language = {de} } @article{Hirschberg2005, author = {Hirschberg, Rainer}, title = {J{\"a}hrliches europ{\"a}isches Teillastprofil von Heizungspumpen. Grundlage fuer Umweltzertifikate}, series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik ; Zeitschrift des Vereins Deutscher Ingenieure ; Organ der VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung (VDI-TGA) / Hrsg. Verein Deutscher Ingenieure. 56 (2005), H. 6}, journal = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik ; Zeitschrift des Vereins Deutscher Ingenieure ; Organ der VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung (VDI-TGA) / Hrsg. Verein Deutscher Ingenieure. 56 (2005), H. 6}, isbn = {1436-5103}, pages = {24 -- 29}, year = {2005}, language = {de} } @article{Hirschberg2004, author = {Hirschberg, Rainer}, title = {{\"O}ffentliche Geb{\"a}ude in der Vorreiterrolle. Studie fordert Anreiz zur Energieeffizienz}, series = {Industriebau. 50 (2004), H. 2}, journal = {Industriebau. 50 (2004), H. 2}, isbn = {0935-2023}, pages = {46 -- 47}, year = {2004}, language = {de} } @article{Hirschberg2004, author = {Hirschberg, Rainer}, title = {Energieeffizienz bei {\"o}ffentlichen Geb{\"a}uden}, series = {Baumeister. 101 (2004), H. 2}, journal = {Baumeister. 101 (2004), H. 2}, isbn = {0005-674X}, pages = {36 -- 37}, year = {2004}, language = {de} } @article{Hirschberg2003, author = {Hirschberg, Rainer}, title = {Energieeffizienz regelungstechnischer Einrichtungen von Pumpenwarmwasserheizungen}, series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik ; Zeitschrift des Vereins Deutscher Ingenieure ; Organ der VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung (VDI-TGA) / Hrsg. Verein Deutscher Ingenieure. 54 (2003), H. 11}, journal = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik ; Zeitschrift des Vereins Deutscher Ingenieure ; Organ der VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung (VDI-TGA) / Hrsg. Verein Deutscher Ingenieure. 54 (2003), H. 11}, isbn = {1436-5103}, pages = {24 -- 29}, year = {2003}, language = {de} } @article{Hirschberg2002, author = {Hirschberg, Rainer}, title = {Die Anlagenbewertung ist Sache der TGA-Branche. Bestimmt k{\"u}nftig der Architekt welche Anlagentechnik eingesetzt wird?}, series = {TGA Fachplaner. 1 (2002), H. 11}, journal = {TGA Fachplaner. 1 (2002), H. 11}, isbn = {1610-5656}, pages = {38 -- 41}, year = {2002}, language = {de} }