@inproceedings{SchulteSchwagerFrantzetal.2022, author = {Schulte, Jonas and Schwager, Christian and Frantz, Cathy and Schloms, Felix and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf}, title = {Control concept for a molten salt receiver in star design: Development, optimization and testing with cloud passage scenarios}, series = {SolarPACES conference proceedings}, booktitle = {SolarPACES conference proceedings}, number = {Vol. 1}, publisher = {TIB Open Publishing}, address = {Hannover}, issn = {2751-9899 (online)}, doi = {10.52825/solarpaces.v1i.693}, pages = {9 Seiten}, year = {2022}, abstract = {A promising approach to reduce the system costs of molten salt solar receivers is to enable the irradiation of the absorber tubes on both sides. The star design is an innovative receiver design, pursuing this approach. The unconventional design leads to new challenges in controlling the system. This paper presents a control concept for a molten salt receiver system in star design. The control parameters are optimized in a defined test cycle by minimizing a cost function. The control concept is tested in realistic cloud passage scenarios based on real weather data. During these tests, the control system showed no sign of unstable behavior, but to perform sufficiently in every scenario further research and development like integrating Model Predictive Controls (MPCs) need to be done. The presented concept is a starting point to do so.}, language = {en} } @article{KrafftFoersterHartetal.2001, author = {Krafft, B. and F{\"o}rster, Arnold and Hart, A. van der and Sch{\"a}pers, T.}, title = {Control of Aharonov-Bohm oscillations in a AlGaAs/GaAs ring by asymmetric and symmetric gate biasing}, series = {Physica E: Low-dimensional Systems and Nanostructures. 9 (2001), H. 4}, journal = {Physica E: Low-dimensional Systems and Nanostructures. 9 (2001), H. 4}, isbn = {1386-9477}, pages = {635 -- 641}, year = {2001}, language = {en} } @article{FoersterSchaepersMueller1994, author = {F{\"o}rster, Arnold and Sch{\"a}pers, T. and M{\"u}ller, F.}, title = {Control of ballistic electrons in (AlGa)As/GaAs heterostructures by means of superconducting niobium gate structures / T. Sch{\"a}pers ; F. M{\"u}ller ; A. F{\"o}rster ...}, series = {Surface Science. 305 (1994), H. 1-3}, journal = {Surface Science. 305 (1994), H. 1-3}, isbn = {0039-6028}, pages = {460 -- 464}, year = {1994}, language = {en} } @article{MartinBergHackeretal.1985, author = {Martin, S. A. and Berg, G. P. A. and Hacker, U. and Hardt, Arno and K{\"o}hler, M. and Meißburger, J. and Osterfeld, F. and Prasuhn, D. and Riepe, G. and Rogge, M. and Schult, O. W. B. and Speth, J. and Turek, P. and Gaul, G. and Hagedoorn, H. and Heide, J. A. van der and Hinterberger, F. and Huber, M. and Jahn, R. and Mayer-Kuckuk, T. and Poth, H. and Paetz gen. Schieck, H.}, title = {COSY - a cooler synchrotron and storage ring}, series = {IEEE transactions on nuclear science. Vol. 32, iss. 5}, journal = {IEEE transactions on nuclear science. Vol. 32, iss. 5}, issn = {1558-1578 (E-Journal); 0018-9499 (Print)}, pages = {2694 -- 2696}, year = {1985}, language = {en} } @article{TillmannFoerster2000, author = {Tillmann, K. and F{\"o}rster, Arnold}, title = {Critical dimensions for the formation of interfacial misfit dislocations of In0.6Ga0.4As islands on GaAs(001)}, series = {Thin Solid Films. 368 (2000), H. 1}, journal = {Thin Solid Films. 368 (2000), H. 1}, isbn = {0040-6090}, pages = {93 -- 104}, year = {2000}, language = {en} } @article{FoersterVergheseZamdmeretal.1997, author = {F{\"o}rster, Arnold and Verghese, S. and Zamdmer, N. and Hu, Qing}, title = {Cryogenic picosecond sampling using fiber-coupled photoconductive switch / S. Verghese ; N. Zamdmer ; Qing Hu ; A. F{\"o}rster}, series = {Applied physics letters. 70 (1997), H. 20}, journal = {Applied physics letters. 70 (1997), H. 20}, isbn = {0003-6951}, pages = {2644 -- 2646}, year = {1997}, language = {en} } @inproceedings{ButenwegMarinkovic2018, author = {Butenweg, Christoph and Marinkovic, Marko}, title = {Damage reduction system for masonry infill walls under seismic loading}, series = {ce/papers}, volume = {2}, booktitle = {ce/papers}, number = {4}, publisher = {Ernst \& Sohn Verlag}, address = {Berlin}, doi = {10.1002/cepa.863}, pages = {267 -- 273}, year = {2018}, abstract = {Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.}, language = {en} } @inproceedings{Dielmann2002, author = {Dielmann, Klaus-Peter}, title = {Darstellung des Erneuerbaren Energiegesetzes (EEG) und dessen Auswirkungen}, year = {2002}, abstract = {Erneuerbares Energien-Gesetz: Anwendungsbereich, Abnahme- und Verg{\"u}tungspflicht, Verg{\"u}tungss{\"a}tze, Netzkosten, Ausgleichsregelungen Auswirkungen des EEG: Photovoltaik, Windkraft, Biomasse, Wasserkraft, Kl{\"a}r-, Deponie- und Grubengas, Geothermie Zusammenfassung und Ausblick}, subject = {Energierecht}, language = {de} } @article{Thielemann2000, author = {Thielemann, Frank}, title = {Das Management von Innovationen aus betriebswirtschaftlicher Sicht}, series = {Humanit{\"a}t - Wandel - Utopie / Bernd Rebe (Hrsg.). Mit Beitr. von Ute Daniel}, journal = {Humanit{\"a}t - Wandel - Utopie / Bernd Rebe (Hrsg.). Mit Beitr. von Ute Daniel}, publisher = {Olms}, address = {Hildesheim}, pages = {33 -- 64}, year = {2000}, language = {de} } @article{SchwarzerHafnerWemhoeneretal.2000, author = {Schwarzer, Klemens and Hafner, B. and Wemh{\"o}ner, C. and Wenzel, T.}, title = {Das Programm CARNOT zur Simulation solarthermischer Anlagen unter MATLAB-Simulink / B. Hafner ; C. Wemh{\"o}ner ; T. Wenzel ; K. Schwarzer}, series = {Sonne - die Energie des 21. Jahrhunderts : Kurzfassungen; 5. - 7. Juli 2000 Freiburg; inklusive 11. Jahrestagung Forschungsverbund Sonnenenergie / 12. Internationales Sonnenforum. [Hrsg.: Deutsche Gesellschaft f{\"u}r Sonnenenergie e.V., DGS. Red.: Joachim Berner; Forschungsverbund Sonnenenergie]}, journal = {Sonne - die Energie des 21. Jahrhunderts : Kurzfassungen; 5. - 7. Juli 2000 Freiburg; inklusive 11. Jahrestagung Forschungsverbund Sonnenenergie / 12. Internationales Sonnenforum. [Hrsg.: Deutsche Gesellschaft f{\"u}r Sonnenenergie e.V., DGS. Red.: Joachim Berner; Forschungsverbund Sonnenenergie]}, publisher = {Solar Promotion}, address = {M{\"u}nchen}, isbn = {3-934349-07-2}, pages = {181 -- 186}, year = {2000}, language = {de} } @incollection{Doeren1990, author = {D{\"o}ren, Horst-Peter}, title = {Das Schweißen von Austenit-Ferrit-Verbindungen}, series = {Jahrbuch Schweißtechnik. 1991}, booktitle = {Jahrbuch Schweißtechnik. 1991}, publisher = {DVS-Verlag}, address = {D{\"u}sseldorf}, isbn = {3-87155-725-0}, pages = {57 -- 63}, year = {1990}, language = {de} } @article{Hoffschmidt2004, author = {Hoffschmidt, Bernhard}, title = {Das Solar-Institut J{\"u}lich an der Fachhochschule Aachen}, series = {Regenerative Energien in Deutschland und in Polen : Aspekte im Hinblick auf den EU-Beitritt Polens ; 6./7. Mai 2004, Lodz/Polen ; Tagungsband / VDI-Gesellschaft Energietechnik. 1. - Aufl.}, journal = {Regenerative Energien in Deutschland und in Polen : Aspekte im Hinblick auf den EU-Beitritt Polens ; 6./7. Mai 2004, Lodz/Polen ; Tagungsband / VDI-Gesellschaft Energietechnik. 1. - Aufl.}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-931384-47-0}, pages = {277 -- 280}, year = {2004}, language = {de} } @book{Hardt1974, author = {Hardt, Arno}, title = {Das Transportsystem BANDIT zur Messung von Halbwertszeiten kurzlebiger, neutronenarmer Isotope}, publisher = {Univ.}, address = {Bonn}, pages = {59 S.}, year = {1974}, language = {de} } @article{HelsperFissanKapadietal.1982, author = {Helsper, Christoph and Fißan, H. J. and Kapadi, A. and Liu, B. Y. H.}, title = {Data Inversion by Simplex Minimization for the Electrical Aerosol Analyzer}, series = {Aerosol Science and Technology. 1 (1982), H. 1982}, journal = {Aerosol Science and Technology. 1 (1982), H. 1982}, isbn = {0278-6826}, pages = {136 -- 146}, year = {1982}, language = {en} } @article{FoersterDarmoDubeckyetal.1994, author = {F{\"o}rster, Arnold and Darmo, J. and Dubeck{\´y}, F. and Kordos, P.}, title = {Deep-level states and electrical properties of GaAs grown at 250 °C / J. Darmo ; F. Dubeck{\´y} ; P. Kordos ; A. F{\"o}rster ...}, series = {Materials science and engineering B: Solid\&\#150; state materials for advanced technology. 28 (1994), H. 1-3}, journal = {Materials science and engineering B: Solid\&\#150; state materials for advanced technology. 28 (1994), H. 1-3}, isbn = {0921-5107}, pages = {393 -- 396}, year = {1994}, language = {en} } @article{BreitbachSchmidtPlutkaSchubertetal.1993, author = {Breitbach, Gerd and Schmidt-Plutka, A. and Schubert, F. and Nickel, H.}, title = {Deformation behaviour of structures exposed at very high temperatures to cyclic thermal and mechanical loadings}, series = {Structural mechanics in reactor technology : transactions of the 12th International Conference on Structural Mechanics in Reactor Technology, Stuttgart, Germany, 15-20 August 1993 / ed. Karl F. Kussmaul. - Bd. L : Inelastic behaviour of solids and structures}, journal = {Structural mechanics in reactor technology : transactions of the 12th International Conference on Structural Mechanics in Reactor Technology, Stuttgart, Germany, 15-20 August 1993 / ed. Karl F. Kussmaul. - Bd. L : Inelastic behaviour of solids and structures}, publisher = {Elsevier}, address = {Amsterdam [u.a.]}, isbn = {0-444-81515-5}, pages = {203 -- 208}, year = {1993}, language = {en} } @book{SchwarzerKrings1996, author = {Schwarzer, Klemens and Krings, Thomas}, title = {Demonstrations- und Feldtest von Solarkochern mit tempor{\"a}rem Speicher in Indien und Mali. - Als Ms. gedr. - (Berichte aus der Energietechnik)}, publisher = {Shaker}, address = {Aachen}, isbn = {3-8265-1981-7}, pages = {V, 106 S. : Ill.}, year = {1996}, language = {de} } @article{FoersterIndlekoferLueth2002, author = {F{\"o}rster, Arnold and Indlekofer, K.M. and L{\"u}th, H.}, title = {Density-matrix description of a quantum dot system with variable lateral confinement in the single-electron tunneling regime. Indlekofer, K.M.; F{\"o}rster, A.; L{\"u}th, H.}, series = {Physica B: Condensed Matter. 314 (2002), H. 1-4}, journal = {Physica B: Condensed Matter. 314 (2002), H. 1-4}, isbn = {0921-4526}, pages = {499 -- 502}, year = {2002}, language = {en} } @article{FoersterRosePietschetal.1994, author = {F{\"o}rster, Arnold and Rose, D. and Pietsch, U. and Metzger, H.}, title = {Depth resolved investigation of the relaxation behaviour in strained GaInAs/GaAs superlattices / Rose, D. ; Pietsch, U. ; F{\"o}rster, A. ; Metzger, H....}, series = {Physica B: condensed matter. 198 (1994), H. 1-3}, journal = {Physica B: condensed matter. 198 (1994), H. 1-3}, isbn = {0921-4526}, pages = {256 -- 258}, year = {1994}, language = {en} } @article{FoersterRosePietschetal.1995, author = {F{\"o}rster, Arnold and Rose, D. and Pietsch, U. and Metzger, T. H.}, title = {Depth resolved investigations of the relaxation behaviour in strained GaInAs/GaAs superlattices using grazing incidence X-ray diffraction / Rose, D. ; Pietsch, U. ; F{\"o}rster, A. ; Metzger, T. H.}, series = {Nuclear instruments and methods in physics research / Section B, Beam interactions with materials and atoms. 97 (1995), H. 1-4}, journal = {Nuclear instruments and methods in physics research / Section B, Beam interactions with materials and atoms. 97 (1995), H. 1-4}, isbn = {0168-583X}, pages = {333 -- 336}, year = {1995}, language = {en} } @incollection{BorchertHintze2009, author = {Borchert, J{\"o}rg and Hintze, D.}, title = {Der Aufbau von Handelseinheiten}, series = {Energiehandel in Europa}, booktitle = {Energiehandel in Europa}, editor = {Zenke, Ines}, edition = {2. Aufl.}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-58373-5}, pages = {393 -- 410}, year = {2009}, language = {de} } @article{WalterBorchert2002, author = {Walter, G. and Borchert, J{\"o}rg}, title = {Der Einsatz von Realoptionen in der Elektrizit{\"a}tswirtschaft}, series = {M \& A Review}, journal = {M \& A Review}, number = {4}, issn = {1616-0878}, pages = {198}, year = {2002}, language = {de} } @incollection{Borchert1997, author = {Borchert, J{\"o}rg}, title = {Der Elektrizit{\"a}tsmarkt in Indonesien und Beteiligungsm{\"o}glichkeiten privater Unternehmen}, series = {Investitionsf{\"u}hrer ASEAN, Indochina, 1997 : Brunei, Indonesien, Kambodscha, Laos, Malaysia, Myanmar, Philippinen, Singapur, Thailand, Vietnam}, booktitle = {Investitionsf{\"u}hrer ASEAN, Indochina, 1997 : Brunei, Indonesien, Kambodscha, Laos, Malaysia, Myanmar, Philippinen, Singapur, Thailand, Vietnam}, edition = {Stand: Mai 1997}, publisher = {Berliner Bank AG}, address = {Berlin}, pages = {42 -- 52}, year = {1997}, language = {de} } @article{DielmannMehlkopfCudina2005, author = {Dielmann, Klaus-Peter and Mehlkopf, Marcus and Cudina, Boris}, title = {Der Handel mit Emissionsrechten : Vorbereitung auf den europaweiten Start 2005}, series = {VGB PowerTech : international journal for electricity and heat generation}, volume = {85}, journal = {VGB PowerTech : international journal for electricity and heat generation}, number = {1/2}, isbn = {1435-3199}, pages = {66 -- 69}, year = {2005}, language = {de} } @incollection{StangelMesekeHahnSteuerDankert2015, author = {Stangel-Meseke, Martina and Hahn, Pia and Steuer-Dankert, Linda}, title = {Der Individualisierungs-Trend pr{\"a}gt die Unternehmenszukunft}, series = {Diversity Management und Individualisierung}, booktitle = {Diversity Management und Individualisierung}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3-658-07484-5}, doi = {10.1007/978-3-658-07485-2_1}, pages = {1 -- 3}, year = {2015}, abstract = {Laut Zukunftsinstitut (2010) stellt die Individualisierung eine langfristige und nachhaltige Ver{\"a}nderung dar, die die gesamte Gesellschaft (den einzelnen Menschen, Unternehmen, den Staat) betrifft und Auswirkungen auf nahezu alle Lebensbereiche (z. B. Arbeit, Wohnen, Partnerschaft) hat. Die Individualisierung beschreibt dabei die Entwicklung hin zur Fokussierung pers{\"o}nlicher Interessen und Lebensentscheidungen der einzelnen Person (Kunze, Individualisierung, 2011). Der Grund f{\"u}r diese Entwicklung sind laut Kunze (Individualisierung, 2011) Treiber wie steigendes Verm{\"o}gen, Bildung und Mobilit{\"a}t, was die einzelne Person unabh{\"a}ngiger von gr{\"o}ßeren Gemeinschaften macht und mehr Freiheit zur Selbstverwirklichung bietet. Als eine Konsequenz daraus werden Wertevorstellungen nicht mehr einfach hingenommen, sondern f{\"u}r die eigene Person {\"u}berpr{\"u}ft und individualisiert (Kunze, Individualisierung, 2011). So wies Beck bereits 1996 darauf hin, dass Individualisierung meint „erstens die Aufl{\"o}sung und zweitens die Abl{\"o}sung industriegesellschaftlicher Lebensformen durch andere, in denen die Einzelnen ihre Biographie selbst herstellen, inszenieren, zusammenflickschustern m{\"u}ssen" (Beck, Die Erfindung des Politischen, 1996, S. 150).}, language = {de} } @techreport{ButenwegDargelHoechstetal.2012, author = {Butenweg, Christoph and Dargel, H.-J. and H{\"o}chst, T. and Holtschoppen, B. and Schwarz, R. and Sippel, M.}, title = {Der Lastfall Erdbeben im Anlagenbau : Leitfaden : Entwurf, Bemessung und Konstruktion von Tragwerken und Komponenten in der chemischen Industrie in Anlehnung an die DIN EN 1998-1}, publisher = {Verband der Chemischen Industrie e.V.}, address = {Frankfurt}, pages = {20 S.}, year = {2012}, language = {de} } @article{ThielemannChalupsky1994, author = {Thielemann, Frank and Chalupsky, J.}, title = {Der Markt verlangt nach Kooperationen}, series = {Leipziger Wirtschaft. 5 (1994), H. 6}, journal = {Leipziger Wirtschaft. 5 (1994), H. 6}, pages = {14 -- 18}, year = {1994}, language = {de} } @article{BreitbachWolters1986, author = {Breitbach, Gerd and Wolters, J.}, title = {Der sowjetische Druckr{\"o}hren-Siedewasserreaktor / J. Wolters ; G. Breitbach}, series = {Atomwirtschaft - Atomtechnik. 31 (1986), H. 6}, journal = {Atomwirtschaft - Atomtechnik. 31 (1986), H. 6}, isbn = {0004-721x}, pages = {286 -- 289}, year = {1986}, language = {de} } @article{HoffstadtCheenakulaNikolauszetal.2023, author = {Hoffstadt, Kevin and Cheenakula, Dheeraja and Nikolausz, Marcell and Krafft, Simone and Harms, Hauke and Kuperjans, Isabel}, title = {Design and construction of a new reactor for flexible biomethanation of hydrogen}, series = {Fermentation}, volume = {9}, journal = {Fermentation}, number = {8}, publisher = {MDPI}, address = {Basel}, issn = {2311-5637}, doi = {10.3390/fermentation9080774}, pages = {1 -- 16}, year = {2023}, abstract = {The increasing share of renewable electricity in the grid drives the need for sufficient storage capacity. Especially for seasonal storage, power-to-gas can be a promising approach. Biologically produced methane from hydrogen produced from surplus electricity can be used to substitute natural gas in the existing infrastructure. Current reactor types are not or are poorly optimized for flexible methanation. Therefore, this work proposes a new reactor type with a plug flow reactor (PFR) design. Simulations in COMSOL Multiphysics ® showed promising properties for operation in laminar flow. An experiment was conducted to support the simulation results and to determine the gas fraction of the novel reactor, which was measured to be 29\%. Based on these simulations and experimental results, the reactor was constructed as a 14 m long, 50 mm diameter tube with a meandering orientation. Data processing was established, and a step experiment was performed. In addition, a kLa of 1 h-1 was determined. The results revealed that the experimental outcomes of the type of flow and gas fractions are in line with the theoretical simulation. The new design shows promising properties for flexible methanation and will be tested.}, language = {en} } @inproceedings{ButenwegRajan2014, author = {Butenweg, Christoph and Rajan, Sreelakshmy}, title = {Design and construction techniques of AAC masonry buildings in earthquakes regions}, series = {10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014}, booktitle = {10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014}, year = {2014}, language = {en} } @article{KuertenMottaghyZiegler2015, author = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin}, title = {Design of plane energy geostructures based on laboratory tests and numerical modelling}, series = {Energy and Buildings}, volume = {107}, journal = {Energy and Buildings}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0378-7788}, doi = {10.1016/j.enbuild.2015.08.039}, pages = {434 -- 444}, year = {2015}, language = {en} } @inproceedings{HardtAbdelGawadMartinetal.1975, author = {Hardt, Arno and Abdel-Gawad, A and Martin, S. and Reich, J.}, title = {Design procedures for the Juelich QQDDQ high resolution spectrometer}, series = {Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975}, booktitle = {Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975}, pages = {45 -- 51}, year = {1975}, language = {en} } @inproceedings{RochefortVerverGrunendahletal.2005, author = {Rochefort, E. de and Verver, M. and Grunendahl, A. and Mooi, H. and Butenweg, Christoph}, title = {Detailed modelling of the lumbar spine for investigation of low back pain}, series = {Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)}, booktitle = {Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)}, publisher = {SAE International}, address = {Warrendale, Pa.}, organization = {Society of Automotive Engineers}, issn = {0096-736X}, doi = {10.4271/2005-01-2716}, pages = {1 -- 11}, year = {2005}, language = {en} } @article{RochefortVerverGrunendahletal.2005, author = {Rochefort, E. de and Verver, M. and Grunendahl, A. and Mooi, H. and Butenweg, Christoph}, title = {Detailed modelling of the lumbar spine for investigations of low back pain}, series = {SAE transactions : papers presented at Society and Section meetings / Society of Automotive Engineers}, volume = {Volume 114}, journal = {SAE transactions : papers presented at Society and Section meetings / Society of Automotive Engineers}, number = {Part 7}, organization = {Society of Automotive Engineers}, issn = {0096-736X}, pages = {788 -- 796}, year = {2005}, language = {en} } @article{KernSchelthoffMathieu2011, author = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz}, title = {Detaillierte Berechnung der Einfangwirksamkeiten von Fangeinrichtungen mit einem dynamischen elektro-geometrischen Modell - Detailed calculation of the interception efficiencies for airtermination systems using a dynamic electro-geometrical model}, pages = {1 -- 5}, year = {2011}, language = {de} } @inproceedings{TakenagaHerreraWerneretal.2013, author = {Takenaga, Shoko and Herrera, Cony F. and Werner, Frederik and Biselli, Manfred and Schnitzler, Thomas and Sch{\"o}ning, Michael Josef and {\"O}hlschl{\"a}ger, Peter and Wagner, Torsten}, title = {Detection of the metabolic activity of cells by differential measurements based on a single light-addressable potentiometric sensor chip}, series = {11. Dresdner Sensor-Symposium : 9.-11.12.2013}, booktitle = {11. Dresdner Sensor-Symposium : 9.-11.12.2013}, organization = {Dresdner Sensor-Symposium <11, 2013>}, isbn = {978-3-9813484-5-3}, pages = {63 -- 67}, year = {2013}, language = {en} } @article{HelsperMoelter1987, author = {Helsper, Christoph and M{\"o}lter, W.}, title = {Determination and Neutralization of the Charge Produced by the Dispersion of Powders}, series = {Journal of Aerosol Science. 18 (1987), H. 6}, journal = {Journal of Aerosol Science. 18 (1987), H. 6}, isbn = {0021-8502}, pages = {877 -- 880}, year = {1987}, language = {de} } @article{HelsperFissanThielen1983, author = {Helsper, Christoph and Fißan, H. J. and Thielen, H. J.}, title = {Determination of Particle Size Distributions by Means of an Electrostatic Classifier / Fißan, H. J.; Helsper, C. ; Thielen, H. J.}, series = {Journal of Aerosol Science. 14 (1983), H. 3}, journal = {Journal of Aerosol Science. 14 (1983), H. 3}, isbn = {0021-8502}, pages = {354 -- 357}, year = {1983}, language = {en} } @article{FoersterTillmannThust1996, author = {F{\"o}rster, Arnold and Tillmann, K. and Thust, M.}, title = {Determination of segregation, elastic strain and thin-foil relaxation in InxGa-1-x As islands on GaAs(001) by high resolution transmission electron microscopy / K. Tillmann ; A. Thust ; M. Lentzen ... A. F{\"o}rster ...}, series = {Philosophical magazine / Letters. 74 (1996), H. 5}, journal = {Philosophical magazine / Letters. 74 (1996), H. 5}, isbn = {1362-3036}, pages = {309 -- 315}, year = {1996}, language = {en} } @article{HelsperWiedensohlerWeiseetal.1986, author = {Helsper, Christoph and Wiedensohler, A. and Weise, W. and L{\"u}tkemeier, E.}, title = {Determination of the Bipolar Charge Equilibrium in Pure Gases / Wiedensohler, A. ; Weise, W. ; Helsper, C. ; L{\"u}tkemeier, E.}, series = {Aerosols : formation and reactivity ; proceedings of the second International Aerosol Conference, 22-26 Sept. 1986, Berlin (West) / Gesellschaft f{\"u}r Aerosolforschung (GAeF) ; American Association for Aerosol Research (AAAR)}, journal = {Aerosols : formation and reactivity ; proceedings of the second International Aerosol Conference, 22-26 Sept. 1986, Berlin (West) / Gesellschaft f{\"u}r Aerosolforschung (GAeF) ; American Association for Aerosol Research (AAAR)}, publisher = {Pergamon Press}, address = {Oxford [u.a.]}, pages = {383 -- 386}, year = {1986}, language = {en} } @article{WernerKrumbeSchumacheretal.2011, author = {Werner, Frederik and Krumbe, Christoph and Schumacher, Katharina and Groebel, Simone and Spelthahn, Heiko and Stellberg, Michael and Wagner, Torsten and Yoshinobu, Tatsuo and Selmer, Thorsten and Keusgen, Michael and Baumann, Marcus and Sch{\"o}ning, Michael Josef}, title = {Determination of the extracellular acidification of Escherichia coli by a light-addressable potentiometric sensor}, series = {Physica status solidi (a) : applications and material science. 208 (2011), H. 6}, journal = {Physica status solidi (a) : applications and material science. 208 (2011), H. 6}, publisher = {Wiley}, address = {Weinheim}, isbn = {1862-6319}, pages = {1340 -- 1344}, year = {2011}, language = {en} } @article{ArpshofenPoolSommeretal.1983, author = {Arpshofen, Ingo and Pool, M. J. and Sommer, Ferdinand and Gerling, Ulrich and Predel, Bruno and Schultheiss, Emil}, title = {Determination of the integral mixing enthalpies in the Cu-Pd-Si liquid ternary alloy system at 1600 K}, series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 1}, journal = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 1}, issn = {0044-3093 ; 0179-4841}, pages = {25 -- 32}, year = {1983}, language = {en} } @inproceedings{CaminosSchmitzAttietal.2022, author = {Caminos, Ricardo Alexander Chico and Schmitz, Pascal and Atti, Vikrama and Mahdi, Zahra and Teixeira Boura, Cristiano Jos{\´e} and Sattler, Johannes Christoph and Herrmann, Ulf and Hilger, Patrick and Dieckmann, Simon}, title = {Development of a micro heliostat and optical qualification assessment with a 3D laser scanning method}, series = {SOLARPACES 2020}, booktitle = {SOLARPACES 2020}, number = {2445 / 1}, publisher = {AIP conference proceedings / American Institute of Physics}, address = {Melville, NY}, isbn = {978-0-7354-4195-8}, issn = {1551-7616 (online)}, doi = {10.1063/5.0086262}, pages = {8 Seiten}, year = {2022}, abstract = {The Solar-Institut J{\"u}lich (SIJ) and the companies Hilger GmbH and Heliokon GmbH from Germany have developed a small-scale cost-effective heliostat, called "micro heliostat". Micro heliostats can be deployed in small-scale concentrated solar power (CSP) plants to concentrate the sun's radiation for electricity generation, space or domestic water heating or industrial process heat. In contrast to conventional heliostats, the special feature of a micro heliostat is that it consists of dozens of parallel-moving, interconnected, rotatable mirror facets. The mirror facets array is fixed inside a box-shaped module and is protected from weathering and wind forces by a transparent glass cover. The choice of the building materials for the box, tracking mechanism and mirrors is largely dependent on the selected production process and the intended application of the micro heliostat. Special attention was paid to the material of the tracking mechanism as this has a direct influence on the accuracy of the micro heliostat. The choice of materials for the mirror support structure and the tracking mechanism is made in favor of plastic molded parts. A qualification assessment method has been developed by the SIJ in which a 3D laser scanner is used in combination with a coordinate measuring machine (CMM). For the validation of this assessment method, a single mirror facet was scanned and the slope deviation was computed.}, language = {en} } @inproceedings{SurteesGillespieKernetal.2004, author = {Surtees, A. J. and Gillespie, A. and Kern, Alexander and Rousseau, A.}, title = {DEVELOPMENT OF A RISK ASSESSMENT CALCULATOR BASED ON A SIMPLIFIED FORM OF THE IEC 62305-2 STANDARD ON LIGHTNING PROTECTION}, year = {2004}, abstract = {Neue Blitzschutznorm IEC 62305. Entwicklung einer einfachen Software zur Risikoabw{\"a}gung}, language = {en} } @article{HoffschmidtFernandezKonstandopoulus2001, author = {Hoffschmidt, Bernhard and Fernandez, V. and Konstandopoulus, A. G.}, title = {Development of ceramic volumetric receiver technology}, series = {Forschungsbericht : DLR FB. 10 (2001)}, journal = {Forschungsbericht : DLR FB. 10 (2001)}, isbn = {0939-2963}, pages = {51 -- 61}, year = {2001}, language = {en} } @article{EdipSesovButenwegetal.2018, author = {Edip, K. and Sesov, V. and Butenweg, Christoph and Bojadjieva, J.}, title = {Development of coupled numerical model for simulation of multiphase soil}, series = {Computers and Geotechnics}, volume = {96}, journal = {Computers and Geotechnics}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0266-352X}, doi = {10.1016/j.compgeo.2017.08.016}, pages = {118 -- 131}, year = {2018}, abstract = {In this paper, a coupled multiphase model considering both non-linearities of water retention curves and solid state modeling is proposed. The solid displacements and the pressures of both water and air phases are unknowns of the proposed model. The finite element method is used to solve the governing differential equations. The proposed method is demonstrated through simulation of seepage test and partially consolidation problem. Then, implementation of the model is done by using hypoplasticity for the solid phase and analyzing the fully saturated triaxial experiments. In integration of the constitutive law error controlling is improved and comparisons done accordingly. In this work, the advantages and limitations of the numerical model are discussed.}, language = {en} } @inproceedings{SattlerSchneiderAngeleetal.2022, author = {Sattler, Johannes Christoph and Schneider, Iesse Peer and Angele, Florian and Atti, Vikrama and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf}, title = {Development of heliostat field calibration methods: Theory and experimental test results}, series = {SolarPACES conference proceedings}, booktitle = {SolarPACES conference proceedings}, number = {Vol. 1}, publisher = {TIB Open Publishing}, address = {Hannover}, issn = {2751-9899 (online)}, doi = {10.52825/solarpaces.v1i.678}, pages = {9 Seiten}, year = {2022}, abstract = {In this work, three patent pending calibration methods for heliostat fields of central receiver systems (CRS) developed by the Solar-Institut J{\"u}lich (SIJ) of the FH Aachen University of Applied Sciences are presented. The calibration methods can either operate in a combined mode or in stand-alone mode. The first calibration method, method A, foresees that a camera matrix is placed into the receiver plane where it is subjected to concentrated solar irradiance during a measurement process. The second calibration method, method B, uses an unmanned aerial vehicle (UAV) such as a quadrocopter to automatically fly into the reflected solar irradiance cross-section of one or more heliostats (two variants of method B were tested). The third calibration method, method C, foresees a stereo central camera or multiple stereo cameras installed e.g. on the solar tower whereby the orientations of the heliostats are calculated from the location detection of spherical red markers attached to the heliostats. The most accurate method is method A which has a mean accuracy of 0.17 mrad. The mean accuracy of method B variant 1 is 1.36 mrad and of variant 2 is 1.73 mrad. Method C has a mean accuracy of 15.07 mrad. For method B there is great potential regarding improving the measurement accuracy. For method C the collected data was not sufficient for determining whether or not there is potential for improving the accuracy.}, language = {en} } @inproceedings{NeumannAdamBackesetal.2021, author = {Neumann, Hannah and Adam, Mario and Backes, Klaus and B{\"o}rner, Martin and Clees, Tanja and Doetsch, Christian and Glaeser, Susanne and Herrmann, Ulf and May, Johanna and Rosenthal, Florian and Sauer, Dirk Uwe and Stadler, Ingo}, title = {Development of open educational resources for renewable energy and the energy transition process}, series = {ISES SWC 2021}, booktitle = {ISES SWC 2021}, publisher = {International Solar Energy Society}, address = {Freiburg}, doi = {10.18086/swc.2021.47.03}, pages = {6 Seiten}, year = {2021}, abstract = {The dissemination of knowledge about renewable energies is understood as a social task with the highest topicality. The transfer of teaching content on renewable energies into digital open educational resources offers the opportunity to significantly accelerate the implementation of the energy transition. Thus, in the here presented project six German universities create open educational resources for the energy transition. These materials are available to the public on the internet under a free license. So far there has been no publicly accessible, editable media that cover entire learning units about renewable energies extensively and in high technical quality. Thus, in this project, the content that remains up-to-date for a longer period is appropriately prepared in terms of media didactics. The materials enable lecturers to provide students with in-depth training about technologies for the energy transition. In a particular way, the created material is also suitable for making the general public knowledgeable about the energy transition with scientifically based material.}, language = {en} } @inproceedings{MilkovaRosinButenwegetal.2018, author = {Milkova, Kristina and Rosin, Julia and Butenweg, Christoph and Dumova-Jovanoska, Elena}, title = {Development of Seismic Vulnerability Curves for Region Specific Masonry Buildings}, series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018}, booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018}, pages = {1 -- 10}, year = {2018}, language = {en} } @inproceedings{Goldbach2014, author = {Goldbach, Daniel}, title = {Diagnosemaßnahmen im Umfeld der Funktionalen Sicherheit}, series = {AmE 2014 - Automotive meets electronics [Elektronische Ressource] : Beitr{\"a}ge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund / Veranst.: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM)}, booktitle = {AmE 2014 - Automotive meets electronics [Elektronische Ressource] : Beitr{\"a}ge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund / Veranst.: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM)}, editor = {Wahl, Michael}, publisher = {VDE-Verl.}, address = {Berlin}, isbn = {978-3-8007-3580-8}, pages = {172 -- 179}, year = {2014}, language = {de} } @incollection{Goldbach2013, author = {Goldbach, Daniel}, title = {Diagnosemaßnahmen in der funktionalen Sicherheit}, series = {Diagnose in mechatronischen Fahrzeugsystemen, VI : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : 7. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen". Bernhard B{\"a}ker ... (Hrsg.)}, booktitle = {Diagnose in mechatronischen Fahrzeugsystemen, VI : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : 7. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen". Bernhard B{\"a}ker ... (Hrsg.)}, publisher = {Expert Verlag}, address = {Renningen}, isbn = {978-3-8169-3221-5}, pages = {179 -- 198}, year = {2013}, language = {de} } @book{Thielemann1999, author = {Thielemann, Frank}, title = {Die Anfertigung wissenschaftlicher Arbeiten und ihre Pr{\"a}sentation - ein komprimierter Einstieg}, publisher = {MA, Akademie-Verl.- und Druck-Ges.}, address = {Essen}, isbn = {3-89275-027-0}, pages = {49 S. : graph. Darst.}, year = {1999}, language = {de} } @inproceedings{ButenwegBettziecheKuhlmannetal.2005, author = {Butenweg, Christoph and Bettzieche, Volker and Kuhlmann, Wolfram and Meskouris, Konstantin}, title = {Die baudynamische Beurteilung von Talsperren am Beispiel der F{\"u}rwiggetalsperre}, series = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland}, booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland}, publisher = {Inst. f{\"u}r Statik und Dynamik der Tragwerke}, address = {Dresden}, organization = {Fachtagung Baustatik - Baupraxis <8, 2005, Dresden>}, isbn = {3-00-015456-6}, pages = {73 -- 84}, year = {2005}, language = {de} } @book{Hodapp1989, author = {Hodapp, Josef}, title = {Die direkte Selbst-Regelung einer Asynchronmaschine mit einem Signalprozessor}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-147508-4}, pages = {II, 148 S. : graph. Darst.}, year = {1989}, language = {de} } @article{KernSchelthoffMathieu2010, author = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz}, title = {Die dynamische Blitzkugel : Wahrscheinlichkeitsberechnung f{\"u}r Blitzeinschl{\"a}ge in Geb{\"a}ude}, series = {De Fachzeitschrift f{\"u}r das Elektrohandwerk. 13-14 (2010)}, journal = {De Fachzeitschrift f{\"u}r das Elektrohandwerk. 13-14 (2010)}, pages = {24 -- 29}, year = {2010}, language = {de} } @book{Thielemann1996, author = {Thielemann, Frank}, title = {Die Gestaltung von Kooperationen kleiner und mittlerer Unternehmen}, publisher = {IAI, Institut f{\"u}r Angewandte Innovationsforschung}, address = {Bochum}, isbn = {3-928854-06-2}, pages = {II, 285 S.: graph. Darst}, year = {1996}, language = {de} } @book{Thielemann1996, author = {Thielemann, Frank}, title = {Die Gestaltung von Kooperationen zwischen kleinen und mittleren Unternehmen}, address = {Bochum}, pages = {285, II S. : graph. Darst.}, year = {1996}, language = {de} } @book{BruessermannBonka1973, author = {Br{\"u}ssermann, Klaus and Bonka, Hans}, title = {Die Jodfreisetzung aus Kernkraftwerken und Wiederaufbereitungsanlagen sowie Absch{\"a}tzung der zuk{\"u}nftigen Umgebungsbelastung / von H. Bonka u. K. Br{\"u}ssermann}, publisher = {Zentralbibliothek d. Kernforschungsanlage J{\"u}lich GmbH}, address = {J{\"u}lich}, pages = {II; 67 S.: graph. Darst.}, year = {1973}, language = {de} } @article{LueckGerlingPredel1986, author = {L{\"u}ck, Reinhard and Gerling, Ulrich and Predel, Bruno}, title = {Die Konfigurationsentropie fl{\"u}ssiger Legierungen}, series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 3}, journal = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 3}, issn = {0044-3093 ; 0179-4841}, pages = {140 -- 144}, year = {1986}, language = {de} } @article{HoffschmidtKroedelGeigl2002, author = {Hoffschmidt, Bernhard and Kr{\"o}del, Matthias and Geigl, Florian}, title = {Die Kraft der Sonne / Matthias Kr{\"o}del ; Florian Geigl ; Bernhard Hoffschmidt}, series = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2002)}, journal = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2002)}, isbn = {0937-0420}, pages = {18 -- 19}, year = {2002}, language = {de} } @article{KernLandersScheibeetal.2006, author = {Kern, Alexander and Landers, E.-U. and Scheibe, K. and Zahlmann, P.}, title = {Die k{\"u}nftige deutsche Blitzschutznormung (1) : Reihe DIN EN 62305 / VDE 0185-305-x:2006}, series = {De : der Elektro- und Geb{\"a}udetechniker / Ausgabe ZV. 81 (2006), H. 15-16}, journal = {De : der Elektro- und Geb{\"a}udetechniker / Ausgabe ZV. 81 (2006), H. 15-16}, isbn = {1617-1160}, pages = {26 -- 30}, year = {2006}, language = {de} } @article{KernLanders2006, author = {Kern, Alexander and Landers, E.-U.}, title = {Die k{\"u}nftige deutsche Blitzschutznormung (2/3) - Reihe DIN EN 62305:2006 - Teil 2: Risikomanagement}, series = {De : der Elektro- und Geb{\"a}udetechniker / Ausgabe ZV. 81 (2006), H. 18 - 19}, journal = {De : der Elektro- und Geb{\"a}udetechniker / Ausgabe ZV. 81 (2006), H. 18 - 19}, isbn = {1617-1160}, year = {2006}, language = {de} } @inproceedings{Kern2013, author = {Kern, Alexander}, title = {Die neue DIN EN 62305-2 (VDE 0185-305-2) Ed.2:2013-02 - {\"A}nderungen zur Ed.l und zugeh{\"o}rige Beibl{\"a}tter}, series = {10. VDE, VBB-Blitzschutztagung : Vortr{\"a}ge der 10. VDE, ABB-Fachtagung vom 24. bis 25. Oktober 2013 in Neu-Ulm. (VDE-Fachbericht ; 70)}, booktitle = {10. VDE, VBB-Blitzschutztagung : Vortr{\"a}ge der 10. VDE, ABB-Fachtagung vom 24. bis 25. Oktober 2013 in Neu-Ulm. (VDE-Fachbericht ; 70)}, publisher = {VDE-Verl.}, address = {Berlin}, organization = {Blitzschutztagung <10, 2013, Neu-Ulm>}, isbn = {978-3-8007-3540-2}, pages = {9 -- 16}, year = {2013}, language = {de} } @article{Butenweg2017, author = {Butenweg, Christoph}, title = {Die neue Erdbebenfibel. Neue Hilfsmittel f{\"u}r die Leichtbetonindustrie}, series = {Tagungsband 61. Ulmer Beton Tage 2017}, journal = {Tagungsband 61. Ulmer Beton Tage 2017}, year = {2017}, language = {de} } @article{FoersterLuethSchaepers1999, author = {F{\"o}rster, Arnold and L{\"u}th, Hans and Sch{\"a}pers, Thomas}, title = {Die neue Welt}, series = {Spektrum der Wissenschaft (1999)}, journal = {Spektrum der Wissenschaft (1999)}, isbn = {0170-2971}, pages = {90 -- 93}, year = {1999}, language = {de} } @article{KernLanders2002, author = {Kern, Alexander and Landers, E.-U.}, title = {Die neuen Blitzschutz-Vornormen der Reihe VDE-V 0185:2002}, year = {2002}, language = {de} } @article{Kern2006, author = {Kern, Alexander}, title = {Die neuen Blitzschutznormen der Reihe DIN EN 62305 (VDE 0185-305-x)}, series = {ETZ : Elektrotechnik + Automation. 2006 (2006), H. 2}, journal = {ETZ : Elektrotechnik + Automation. 2006 (2006), H. 2}, isbn = {0170-1711}, pages = {42 -- 45}, year = {2006}, language = {de} } @article{KernScheibe2011, author = {Kern, Alexander and Scheibe, Klaus}, title = {Die neuen internationalen Blitzschutz-Standards der Reihe IEC 62305:2010 : {\"U}berblick und Stand der Umsetzung in die nationale Normenreihe DIN EN 62305}, series = {9. VDE/ABB-Blitzschutztagung : Vortr{\"a}ge der 9. VDE/ABB-Fachtagung vom 27. bis 28. Oktober 2011 in Neu-Ulm / Veranst.: Ausschuss f{\"u}r Blitzschutz und Blitzforschung (ABB) im VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. Wiss. Tagungsleitung: K. Stimper}, journal = {9. VDE/ABB-Blitzschutztagung : Vortr{\"a}ge der 9. VDE/ABB-Fachtagung vom 27. bis 28. Oktober 2011 in Neu-Ulm / Veranst.: Ausschuss f{\"u}r Blitzschutz und Blitzforschung (ABB) im VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. Wiss. Tagungsleitung: K. Stimper}, publisher = {VDE-Verl.}, address = {Berlin}, isbn = {978-3-8007-3380-4}, pages = {7 -- 12}, year = {2011}, language = {de} } @incollection{DoerenPlaschkaPohl1987, author = {D{\"o}ren, Horst-Peter and Plaschka, K. and Pohl, M.}, title = {Die Untersuchung von Schutzgasschweißdr{\"a}hten mit Hilfe des Rasterelektronenmikroskops}, series = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18}, booktitle = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18}, publisher = {Riederer}, address = {Stuttgart}, issn = {0343-3579}, pages = {333 -- 345}, year = {1987}, language = {de} } @article{HoffschmidtKoll2005, author = {Hoffschmidt, Bernhard and Koll, Gerrit}, title = {Die Zukunft der Stromerzeugung ; die Entwicklung der Luftreceivertechnologie bei Kraftanlagen M{\"u}nchen / Gerrit Koll ; Berhard Hoffschmidt}, series = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2005)}, journal = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2005)}, isbn = {0937-0420}, pages = {42 -- 46}, year = {2005}, language = {de} } @article{NeubauerJungnickel1993, author = {Neubauer, Boris and Jungnickel, B. J.}, title = {Diffusion als Maß f{\"u}r die elektrische Isolier-Dauerfestigkeit von PE. L{\"a}ngs- und Querdiffusion durch transkristalline Oberfl{\"a}chenschichten}, series = {Kunststoffe. 83 (1993), H. 3}, journal = {Kunststoffe. 83 (1993), H. 3}, isbn = {0023-5563}, pages = {231 -- 233}, year = {1993}, language = {de} } @inproceedings{Pieper2018, author = {Pieper, Martin}, title = {Digitale Hochschullehre in mathematischen und mathematikdidaktischen Veranstaltungen}, series = {Beitr{\"a}ge zum Mathematikunterricht 2018 : Vortr{\"a}ge zur Mathematikdidaktik und zur Schnittstelle Mathematik/Mathematikdidaktik auf der gemeinsamen Jahrestagung GDM und DMV 2018 (52. Jahrestagung der Gesellschaft f{\"u}r Didaktik der Mathematik). Bd. 1}, booktitle = {Beitr{\"a}ge zum Mathematikunterricht 2018 : Vortr{\"a}ge zur Mathematikdidaktik und zur Schnittstelle Mathematik/Mathematikdidaktik auf der gemeinsamen Jahrestagung GDM und DMV 2018 (52. Jahrestagung der Gesellschaft f{\"u}r Didaktik der Mathematik). Bd. 1}, publisher = {WTM-Verlag}, address = {M{\"u}nster}, isbn = {978-3-95987-089-4}, pages = {105 -- 106}, year = {2018}, language = {de} } @article{KernBeierlZischank2009, author = {Kern, Alexander and Beierl, O. and Zischank, W.}, title = {DIN EN 62 305-3 - Berechnung des Trennungsabstands (Anmerkungen zur Anwendung der Berechnungsverfahren und vereinfachte Verfahren zur Absch{\"a}tzung der Stromaufteilung) / Kern, A. ; Beierl, O. ; Zischank, W.}, series = {Elektropraktiker. 63 (2009), H. 3}, journal = {Elektropraktiker. 63 (2009), H. 3}, publisher = {HUSS-MEDIEN GmbH}, address = {Berlin}, isbn = {0013-5569}, pages = {218 -- 222}, year = {2009}, language = {de} } @article{SchuellerRuhlDinstuehlerSengeretal.2022, author = {Sch{\"u}ller-Ruhl, Aaron and Dinst{\"u}hler, Leonard and Senger, Thorsten and Bergfeld, Stefan and Ingenhag, Christian and Fleischhaker, Robert}, title = {Direct fabrication of arbitrary phase masks in optical glass via ultra-short pulsed laser writing of refractive index modifications}, series = {Applied Physics B}, volume = {128}, journal = {Applied Physics B}, number = {Article number: 208}, editor = {Mackenzie, Jacob}, publisher = {Springer}, address = {Berlin}, issn = {1432-0649 (Online)}, doi = {10.1007/s00340-022-07928-2}, pages = {1 -- 11}, year = {2022}, abstract = {We study the possibility to fabricate an arbitrary phase mask in a one-step laser-writing process inside the volume of an optical glass substrate. We derive the phase mask from a Gerchberg-Saxton-type algorithm as an array and create each individual phase shift using a refractive index modification of variable axial length. We realize the variable axial length by superimposing refractive index modifications induced by an ultra-short pulsed laser at different focusing depth. Each single modification is created by applying 1000 pulses with 15 μJ pulse energy at 100 kHz to a fixed spot of 25 μm diameter and the focus is then shifted axially in steps of 10 μm. With several proof-of-principle examples, we show the feasibility of our method. In particular, we identify the induced refractive index change to about a value of Δn=1.5⋅10-3. We also determine our current limitations by calculating the overlap in the form of a scalar product and we discuss possible future improvements.}, language = {en} } @article{BreitbachPenkallaSchubert1989, author = {Breitbach, Gerd and Penkalla, H.-J. and Schubert, F.}, title = {Diskussion eines neuen ORNL-Stoffgesetzes fuer Inconel 617 / H.-J. Penkalla ; G. Breitbach ; F. Schubert}, series = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt Langzeitintegrit{\"a}t der druckf{\"u}hrenden Bauteile von Kernkraftwerken : [5. - 6. Oktober 1989] / Staatliche Materialpr{\"u}fungsanstalt Universit{\"a}t Stuttgart. - Bd. 2 : Zeitstandvehalten, Kriechvorg{\"a}nge, Rohrleitungsverhalten, Bruchmechanik : (Vortr{\"a}ge 23 - 45)}, journal = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt Langzeitintegrit{\"a}t der druckf{\"u}hrenden Bauteile von Kernkraftwerken : [5. - 6. Oktober 1989] / Staatliche Materialpr{\"u}fungsanstalt Universit{\"a}t Stuttgart. - Bd. 2 : Zeitstandvehalten, Kriechvorg{\"a}nge, Rohrleitungsverhalten, Bruchmechanik : (Vortr{\"a}ge 23 - 45)}, publisher = {MPA}, address = {Stuttgart}, pages = {28.1 -- 28.20}, year = {1989}, language = {de} } @inproceedings{ButenwegGellert2008, author = {Butenweg, Christoph and Gellert, Christoph}, title = {Displacement based design of masonry structures}, series = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...}, booktitle = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...}, publisher = {University of Newcastle}, address = {Callaghan}, organization = {International Brick and Block Masonry Conference <14, 2008, Sydney>}, isbn = {978-19-2070-1-92-5}, pages = {1 -- 10}, year = {2008}, language = {en} } @article{SchwarzerKrings1996, author = {Schwarzer, Klemens and Krings, T.}, title = {Dissemination of solar cookers with and without temporary storage : a report of concrete examples ; experiences from Chile, India and Mali}, series = {Proceedings / EuroSun '96 : 10. Internationales Sonnenforum. Ed. by A. Goetzberger ... - Bd. 4}, journal = {Proceedings / EuroSun '96 : 10. Internationales Sonnenforum. Ed. by A. Goetzberger ... - Bd. 4}, publisher = {DGS-Sonnenenergie-Verl.}, address = {M{\"u}nchen}, pages = {1479 -- 1482}, year = {1996}, language = {en} } @incollection{SteuerDankertBouffierGaedickeetal.2017, author = {Steuer-Dankert, Linda and Bouffier, Anna and Gaedicke, Sonja and Leicht-Scholten, Carmen}, title = {Diversifying engineering education: a transdisciplinary approach from RWTH Aachen University}, series = {Strategies for increasing diversity in engineering majors and careers}, booktitle = {Strategies for increasing diversity in engineering majors and careers}, publisher = {IGI Global}, address = {Hershey, USA}, isbn = {9781522522126}, doi = {10.4018/978-1-5225-2212-6.ch010}, pages = {201 -- 235}, year = {2017}, abstract = {Engineers and therefore engineering education are challenged by the increasing complexity of questions to be answered globally. The education of future engineers therefore has to answer with curriculums that build up relevant skills. This chapter will give an example how to bring engineering and social responsibility successful together to build engineers of tomorrow. Through the integration of gender and diversity perspectives, engineering research and teaching is expanded with new perspectives and contents providing an important potential for innovation. Aiming on the enhancement of engineering education with distinctive competencies beyond technical expertise, the teaching approach introduced in the chapter represents key factors to ensure that coming generations of engineers will be able to meet the requirements and challenges a changing globalized world holds for them. The chapter will describe how this approach successfully has been implemented in the curriculum in engineering of a leading technical university in Germany.}, language = {en} } @article{SteuerDankertSharmaBlecketal.2017, author = {Steuer-Dankert, Linda and Sharma, Mamta Rameshwarlal and Bleck, Wolfgang and Leicht-Scholten, Carmen}, title = {Diversity and innovation management in large research groups}, series = {International Journal of Innovation Management}, volume = {5}, journal = {International Journal of Innovation Management}, number = {2}, issn = {1757-5877}, pages = {49 -- 72}, year = {2017}, abstract = {Contemporary research appreciates a diverse workforce as a potential source of innovation. Researchers explore the fine details of why diversity management is central for generating innovations in heterogeneous research groups and how it could be effectively implemented into organizations. Complex research associations that discuss topics with a high impact on society increasingly address the necessity of establishing a diverse workforce to confront the challenges of tomorrow. Characterized by complex management structures as well as hierarchies, research associations have not been a subject of investigation until now. For this reason, the presented research project aims to develop a diversity and innovation management strategy with the ultimate goal of inducing change in the corporate culture. The proposed approach consisted of six phases; the first two phases investigated the status quo of diversity in the existing organizational structures of member institutes and the variety of particular working cultures within the research association. The third and the fourth phases utilized qualitative and quantitative studies. The third phase focused on the connection of management level to diversity and innovation, and the need for diversity and innovation management, and tailor-made methods of implementing them. The first three phases have been accomplished successfully; preliminary results are already available. The fourth phase will mainly focus on exploring the mind-set of the employees. The fifth phase will consolidate the findings in the first four phases into an implementable strategy. The final phase will address the implementation of this strategy into the organization. Phases 4 to 6 have not yet been undertaken}, language = {en} } @phdthesis{SteuerDankert2020, author = {Steuer-Dankert, Linda}, title = {Diversity in complex organizations : the triangle of diversity management, change management and organizational culture from a system-theoretical perspective}, doi = {10.18154/RWTH-2020-11830}, pages = {298}, year = {2020}, abstract = {Insbesondere im wirtschaftlichen Kontext wird die Diversit{\"a}t von Belegschaften zunehmend als ein kritischer Erfolgsfaktor gesehen. Neben dem Potenzial, welches sich laut Studien aus einem vielf{\"a}ltigen Team ergibt, werden jedoch ebenfalls die aus menschlicher Diversit{\"a}t resultierenden Herausforderungen thematisiert und wissenschaftlich untersucht. Sowohl aus dem Potenzial als auch aus den Herausforderungen ergibt sich dabei die Notwendigkeit der Implementierung eines organisationsspezifischen Diversity Managements, welches die Gewinnung neuer Mitarbeiter*innen einerseits und das Management der vorhandenen Vielfalt andererseits gleichermaßen unterst{\"u}tzt. In der psychologischen, sozial- und wirtschaftswissenschaftlichen Literatur gibt es unterschiedliche Definitionen von Diversit{\"a}t, woraus sich verschiedene Perspektiven auf das Vorgehen bei der Gestaltung und Umsetzung eines Diversity Management Ansatzes ergeben. Insbesondere vor dem Hintergrund der Komplexit{\"a}t des Organisationsumfeldes und der steigenden Anforderungen an die organisationsinterne Agilit{\"a}t besteht die Notwendigkeit, Diversit{\"a}t in Organisationen st{\"a}rker zu reflektieren und systemspezifische Ans{\"a}tze zu entwickeln. Dies erfordert die Ber{\"u}cksichtigung organisationsspezifischer Strukturen und Prozesse sowie die Reflexion des Wandels der Organisationskultur durch die Umsetzung eines Diversity Management Ansatzes, der die gegebene Komplexit{\"a}t aufgreift und bew{\"a}ltigen kann. Dar{\"u}ber hinaus sind die psychologischen Auswirkungen solcher Ver{\"a}nderungen auf die Mitarbeiter*innen zu ber{\"u}cksichtigen, um Reaktanzen zu vermeiden und eine nachhaltige Umsetzung von Diversity Management zu erm{\"o}glichen. In Ermangelung entsprechender Ans{\"a}tze im Rahmen {\"o}ffentlich finanzierter, komplexer Forschungsorganisationen, ist das Ziel dieser Dissertation die Entwicklung und Erprobung eines Forschungsdesigns, welches die Ans{\"a}tze des Diversity- und Change Managements mit der Organisationskultur verkn{\"u}pft, indem es eine systemtheoretische Perspektive einnimmt. Dabei wird das Forschungsdesign auf eine komplexe wissenschaftliche Organisation angewendet. Als Basis dient die in Teil A durchgef{\"u}hrte Betrachtung des aktuellen Forschungsstandes aus einer interdisziplin{\"a}ren Perspektive und die damit einhergehende umfassende Einf{\"u}hrung in das Forschungsfeld. Im Zuge dessen wird detailliert auf die begriffliche Definition von Diversit{\"a}t eingegangen, bevor dann die psychologischen Konzepte im Diversit{\"a}tskontext den {\"U}bergang zu einer differenzierten Auseinandersetzung mit dem Konzept des Diversity Managements bilden. Auf dieser Grundlage werden das Forschungsdesign sowie die daraus resultierenden Forschungsphasen abgeleitet. Teil A stellt somit die theoretische Grundlage f{\"u}r die in Teil B pr{\"a}sentierten Fachaufs{\"a}tze dar. Jeder Fachaufsatz beleuchtet dabei in chronologischer Reihenfolge die unterschiedlichen Forschungsphasen. Fachaufsatz I pr{\"a}sentiert den sechsstufigen Forschungsansatz und beleuchtet die besonderen Rahmenbedingungen des Forschungsobjektes aus einer theoretischen Perspektive. Im Anschluss werden die Ergebnisse der Organisationsanalyse, welche zugleich Phase I und II des Forschungskonzeptes darstellen, vorgestellt. Aufbauend auf diesen Forschungsergebnissen fokussiert Forschungsaufsatz II die Darlegung der Ergebnisse aus Forschungsphase III, der Befragung der F{\"u}hrungsebene. Die Befragung thematisierte dabei die Wahrnehmung von Diversity und Diversity Management auf F{\"u}hrungsebene, die Verkn{\"u}pfung von Diversit{\"a}t mit Innovation sowie die Reflexion des eigenen F{\"u}hrungsstils. Als Ergebnis der Befragung konnten sechs Typen identifiziert werden, die das F{\"u}hrungsverst{\"a}ndnis im Diversit{\"a}tskontext widerspiegeln und somit den Ansatzpunkt f{\"u}r eine top-down gerichtete Diversity Management Strategie darstellen. Darauf aufbauend wird in Forschungsphase IV die Mitarbeiter*innenebene beforscht. Im Zentrum der quantitativen Befragung standen die vorherrschenden Einstellungen zum Themenkomplex Diversity und Diversity Management, die Wahrnehmung von Diversit{\"a}t sowie die Untersuchung des Einflusses der F{\"u}hrungsebene auf die Mitarbeiter*innenebene. Forschungsaufsatz III pr{\"a}sentiert erste Ergebnisse dieser Untersuchung. Die Analyse weist auf eine unterschiedliche Gewichtung der verschiedenen Diversit{\"a}tskategorien hinsichtlich der Verkn{\"u}pfung mit Innovationen und somit der Reflexion des Kontextes zwischen Diversit{\"a}t und Innovationen hin. Vergleichbar mit den identifizierten Typen auf der F{\"u}hrungsebene, deutet die Analyse auf die Existenz unterschiedlicher Reflexionsgrade auf Mitarbeiter*innenebene hin. Auf Basis dessen wird im Rahmen von Forschungsaufsatz IV eine n{\"a}here Untersuchung des Reflexionsgrades auf Mitarbeiter*innenebene pr{\"a}sentiert und der Diversity Management Ansatz mit Elementen des Change Managements kombiniert. Besondere Ber{\"u}cksichtigung findet als Schlussfolgerung einer theoretischen Analyse die Organisationskultur als zentrales Element bei der Entwicklung und Einf{\"u}hrung eines Diversity Management Ansatzes in eine komplexe Forschungsorganisation in Deutschland. Die Analyse zeigt, dass die Wahrnehmung von Diversit{\"a}t heterogen aber zun{\"a}chst losgel{\"o}st vom individuellen Hintergrund ist (im Rahmen dieser Analyse lag der Fokus auf den Diversit{\"a}tskategorien Gender und Herkunft). Hinsichtlich der Wertsch{\"a}tzung von Diversit{\"a}t zeigt sich dabei ebenfalls ein heterogenes Bild. In der Gesamtbetrachtung stimmen lediglich 17\% der Mitarbeiter*innen zu, dass Diversit{\"a}tskategorien wie Gender, Herkunft oder auch Alter einen Mehrwert darstellen k{\"o}nnen. Zugleich bewertet diese Gruppe die dem Thema beigemessene Wichtigkeit im CoE als ausreichend. Zusammengefasst lassen sich folgende Erkenntnisse im Rahmen dieser Dissertation ableiten und dienen somit als Grundlage f{\"u}r die Entwicklung eines Diversity Management Ansatzes: (1) Die Entwicklung eines bedarfsorientierten Diversity Management Ansatzes erfordert einen systemtheoretischen Prozess, der sowohl organisationsinterne als auch externe Einflussfaktoren ber{\"u}cksichtigt. Der im Rahmen des Forschungsprojektes entwickelte sechsstufige Forschungsprozess hat sich dabei als geeignetes Instrument erwiesen. (2)Im Rahmen {\"o}ffentlicher Forschungseinrichtungen lassen sich dabei drei zentrale Faktoren identifizieren: die individuelle Reflexionsebene, die Organisationskultur sowie extern beeinflusste Organisationsstrukturen, Prozesse und Systeme.(3)Vergleichbar mit privatwirtschaftlichen Unternehmen hat auch in wissenschaftlichen Organisationen die F{\"u}hrungsebene einen maßgeblichen Einfluss auf die Wahrnehmung von Diversit{\"a}t und somit einen Einfluss auf die Umsetzung einer Diversity Management Strategie. Daher ist auch im wissenschaftlichen Kontext, bedingt durch die rechtlichen Rahmenbedingungen des Hochschulsystems, ein top-down Ansatz f{\"u}r eine nachhaltige Implementierung erforderlich. (4) Diversity Management steht in einem engen Zusammenhang mit einem organisationalen Wandel, was die Reflexion von Ver{\"a}nderungsprozesse aus einer psychologischen Perspektive erfordert und eine Verkn{\"u}pfung von Diversity und Change Management bedingt. Aufbauend auf den im Rahmen des entwickelten Forschungskonzeptes gewonnenen zentralen Erkenntnissen wird ein Ansatz entwickelt, der die Ableitung theoretischer Implikationen sowie Implikationen f{\"u}r das Management erm{\"o}glicht. Insbesondere vor dem Hintergrund der Reflexion der besonderen Rahmenbedingungen {\"o}ffentlich finanzierter Forschungsorganisationen werden dar{\"u}ber hinaus politische Implikationen abgeleitet, die auf die Ver{\"a}nderung struktureller Dimensionen abzielen.}, language = {en} } @inproceedings{SteuerDankertLeichtScholten2019, author = {Steuer-Dankert, Linda and Leicht-Scholten, Carmen}, title = {Diversity- and innovation management in complex engineering organizations}, series = {7th International OFEL Conference on Governance, Management and Entrepreneurship: Embracing Diversity in Organisations. April 5th - 6th, 2019, Dubrovnik, Croatia}, booktitle = {7th International OFEL Conference on Governance, Management and Entrepreneurship: Embracing Diversity in Organisations. April 5th - 6th, 2019, Dubrovnik, Croatia}, editor = {Tipurić, Darko and Hruška, Domagoj}, publisher = {Governance Research and Development Centre (CIRU)}, address = {Zagreb}, pages = {136 -- 157}, year = {2019}, abstract = {Diversity is increasingly being addressed as an innovation-promoting factor. For this reason, companies and institutions tackle the integration of a diversity management approach that enables a heterogenic perspective on innovation development. However, system-theoretical frameworks state that the implementation of diversity measures that are not tailored to the needs of the organization often leads to a rejection or reactivity with regard to the management approach. In this context, especially organizations, which are characterized by a specific hierarchical structure, a dominant habitus or specialist culture, must face the challenge of realizing a sustainable change of the corporate culture that sets the basis for implementing diversity management approaches. The presented research project focuses on analyzing the situation in a huge scientific collaborative project - so called Cluster of Excellence (CoE) - with the aim to implement a diversity - and innovation management strategy. Considering the influencing determinants, the CoE is characterized by its embeddedness in the scientific system, a complex organizational structure, and a high fluctuation rate. The paper presents a systemic approach of reflecting these factors in order to develop a diversity- and innovation management strategy. In this frame, the results of a quantitative survey of CoE employees and derived mindset-types are presented. The results show a need for taking different mindset-types into account, to be able to develop a tailored management strategy. The aim of the project is to give recommendations for developing a sustainable management concept that promotes both diversity and innovation by drawing on the persisting mindsets of organization members while reflecting top down as well as bottom up factors of implementation processes as well as the psychology of change. This paper addresses all who are concerned with the management of human resources in innovation processes and are striving for a cultural change within the framework of complex organizations.}, language = {en} } @inproceedings{SattlerAttiAlexopoulosetal.2022, author = {Sattler, Johannes Christoph and Atti, Vikrama and Alexopoulos, Spiros and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Dutta, Siddharth and Kioutsioukis, Ioannis}, title = {DNI forecast tool for the smart operation of a parabolic trough collector system with concrete thermal energy storage: Theory, results and outlook}, series = {SolarPACES conference proceedings}, booktitle = {SolarPACES conference proceedings}, number = {VOL. 1}, publisher = {TIB Open Publishing}, address = {Hannover}, issn = {2751-9899 (online)}, doi = {10.52825/solarpaces.v1i.731}, pages = {9 Seiten}, year = {2022}, abstract = {This work presents a basic forecast tool for predicting direct normal irradiance (DNI) in hourly resolution, which the Solar-Institut J{\"u}lich (SIJ) is developing within a research project. The DNI forecast data shall be used for a parabolic trough collector (PTC) system with a concrete thermal energy storage (C-TES) located at the company KEAN Soft Drinks Ltd in Limassol, Cyprus. On a daily basis, 24-hour DNI prediction data in hourly resolution shall be automatically produced using free or very low-cost weather forecast data as input. The purpose of the DNI forecast tool is to automatically transfer the DNI forecast data on a daily basis to a main control unit (MCU). The MCU automatically makes a smart decision on the operation mode of the PTC system such as steam production mode and/or C-TES charging mode. The DNI forecast tool was evaluated using historical data of measured DNI from an on-site weather station, which was compared to the DNI forecast data. The DNI forecast tool was tested using data from 56 days between January and March 2022, which included days with a strong variation in DNI due to cloud passages. For the evaluation of the DNI forecast reliability, three categories were created and the forecast data was sorted accordingly. The result was that the DNI forecast tool has a reliability of 71.4 \% based on the tested days. The result fulfils SIJ's aim to achieve a reliability of around 70 \%, but SIJ aims to still improve the DNI forecast quality.}, language = {en} } @article{Thielemann1998, author = {Thielemann, Frank}, title = {Druckindustrielle Innovation}, series = {Der Siebdruck. 47 (1998), H. 4}, journal = {Der Siebdruck. 47 (1998), H. 4}, isbn = {0178-2835}, pages = {32 -- ff}, year = {1998}, language = {de} } @article{FoersterHaukeJakumeitetal.1998, author = {F{\"o}rster, Arnold and Hauke, M. and Jakumeit, J. and Krafft, B.}, title = {DX Centers in Al0.3Ga0.7As/GaAs Analyzed by Point Contact Measurements. Hauke, M.; Jakumeit, J.; Krafft, B.; Nimtz, G.; F{\"o}rster, A.; L{\"u}th, H.}, series = {Journal of Applied Physics. 84 (1998), H. 4}, journal = {Journal of Applied Physics. 84 (1998), H. 4}, isbn = {1089-7550}, pages = {2034 -- 2039}, year = {1998}, language = {en} } @article{FoersterLeutherLueth1996, author = {F{\"o}rster, Arnold and Leuther, A. and L{\"u}th, H.}, title = {DX centres, conduction band offsets and Si-dopant segregation in heterostructures / A. Leuther ; A. F{\"o}rster ; H. L{\"u}th ...}, series = {Semiconductor science and technology. 11 (1996), H. 5}, journal = {Semiconductor science and technology. 11 (1996), H. 5}, isbn = {1361-6641}, pages = {766 -- 771}, year = {1996}, language = {en} } @inproceedings{DalguerChurilovButenwegetal.2014, author = {Dalguer, Luis A. and Churilov, Sergey and Butenweg, Christoph and Renault, Philippe and Hyun, An Jun}, title = {Dynamic analysis of a reinforced concrete electrical nuclear building of SMART 2013 project subjected to earthquake excitation using ABAQUS}, series = {Workshop SMART2013 : Paris, France, November 25th - 27th, 2014}, booktitle = {Workshop SMART2013 : Paris, France, November 25th - 27th, 2014}, organization = {Workshop SMART2013 <2014, Paris>}, pages = {1 -- 12}, year = {2014}, language = {en} } @inproceedings{SattlerAlexopoulosCaminosetal.2019, author = {Sattler, Johannes, Christoph and Alexopoulos, Spiros and Caminos, Ricardo Alexander Chico and Mitchell, John C. and Ruiz, Victor C. and Kalogirou, Soteris and Ktistis, Panayiotis K. and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf}, title = {Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation}, series = {AIP Conference Proceedings}, volume = {2126}, booktitle = {AIP Conference Proceedings}, issn = {0094243X}, doi = {10.1063/1.5117663}, pages = {150007-1 -- 150007-8}, year = {2019}, language = {en} } @incollection{ButenwegKlinkel2014, author = {Butenweg, Christoph and Klinkel, Sven}, title = {Dynamisches Verhalten von Stahlbetonplatten unter Impact-Belastungen}, series = {Massivbau im Wandel : Festschrift zum 60. Geburtstag von Josef Hegger}, booktitle = {Massivbau im Wandel : Festschrift zum 60. Geburtstag von Josef Hegger}, publisher = {Ernst}, address = {Berlin}, isbn = {3-939051-20-9}, pages = {369 -- 380}, year = {2014}, language = {de} } @article{HoylerColvinRobinson1987, author = {Hoyler, Friedrich and Colvin, G. G. and Robinson, S. J.}, title = {E0 transitions in 106Pd studied by neutron capture / G. G. Colvin ; F. Hoyler ; S. J. Robinson}, series = {Journal of physics / G. 13 (1987), H. 2}, journal = {Journal of physics / G. 13 (1987), H. 2}, isbn = {0305-4616}, pages = {191 -- 204}, year = {1987}, language = {en} } @inproceedings{BalaskasHoffmeisterButenwegetal.2021, author = {Balaskas, Georgios and Hoffmeister, Benno and Butenweg, Christoph and Pilz, Marco and Bauer, Anna}, title = {Earthquake early warning and response system based on intelligent seismic and monitoring sensors embedded in a communication platform and coupled with BIM models}, series = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering}, booktitle = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering}, editor = {Papadrakakis, Manolis and Fragiadakis, Michalis}, publisher = {National Technical University of Athens}, address = {Athen}, isbn = {978-618-85072-5-8}, issn = {2623-3347}, doi = {10.7712/120121.8539.18855}, pages = {987 -- 998}, year = {2021}, abstract = {This paper describes the concept of an innovative, interdisciplinary, user-oriented earthquake warning and rapid response system coupled with a structural health monitoring system (SHM), capable to detect structural damages in real time. The novel system is based on interconnected decentralized seismic and structural health monitoring sensors. It is developed and will be exemplarily applied on critical infrastructures in Lower Rhine Region, in particular on a road bridge and within a chemical industrial facility. A communication network is responsible to exchange information between sensors and forward warnings and status reports about infrastructures'health condition to the concerned recipients (e.g., facility operators, local authorities). Safety measures such as emergency shutdowns are activated to mitigate structural damages and damage propagation. Local monitoring systems of the infrastructures are integrated in BIM models. The visualization of sensor data and the graphic representation of the detected damages provide spatial content to sensors data and serve as a useful and effective tool for the decision-making processes after an earthquake in the region under consideration.}, language = {en} } @incollection{GiresiniButenweg2019, author = {Giresini, Linda and Butenweg, Christoph}, title = {Earthquake resistant design of structures according to Eurocode 8}, series = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-662-57550-5 (Online)}, doi = {10.1007/978-3-662-57550-5_4}, pages = {197 -- 358}, year = {2019}, abstract = {The chapter initially provides a summary of the contents of Eurocode 8, its aim being to offer both to the students and to practising engineers an easy introduction into the calculation and dimensioning procedures of this earthquake code. Specifically, the general rules for earthquake-resistant structures, the definition of design response spectra taking behaviour and importance factors into account, the application of linear and non-linear calculation methods and the structural safety verifications at the serviceability and ultimate limit state are presented. The application of linear and non-linear calculation methods and corresponding seismic design rules is demonstrated on practical examples for reinforced concrete, steel and masonry buildings. Furthermore, the seismic assessment of existing buildings is discussed and illustrated on the example of a typical historical masonry building in Italy. The examples are worked out in detail and each step of the design process, from the preliminary analysis to the final design, is explained in detail.}, language = {en} } @article{MarinkovicButenweg2020, author = {Marinkovic, Marko and Butenweg, Christoph}, title = {Earthquake-proof system for masonry infills in RC frame structures}, series = {International Journal of Masonry Research and Innovation}, volume = {5}, journal = {International Journal of Masonry Research and Innovation}, number = {2}, publisher = {Inderscience Enterprises}, address = {Olney, Bucks}, issn = {2056-9467}, doi = {10.1504/IJMRI.2020.106328}, pages = {185 -- 208}, year = {2020}, language = {de} } @article{RuppRiekeHandschuhetal.2020, author = {Rupp, Matthias and Rieke, Christian and Handschuh, Nils and Kuperjans, Isabel}, title = {Economic and ecological optimization of electric bus charging considering variable electricity prices and CO₂eq intensities}, series = {Transportation Research Part D: Transport and Environment}, volume = {81}, journal = {Transportation Research Part D: Transport and Environment}, number = {Article 102293}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1361-9209}, doi = {10.1016/j.trd.2020.102293}, year = {2020}, abstract = {In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses. In this study, we present a new methodology for optimizing the vehicles' charging time as a function of the parameters CO₂eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO₂eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle. In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6\% compared to charging at a fixed electricity price. The savings potential of CO₂eq emissions is similar, at 14.9\%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO₂eq intensity is also low in this period, but midday charging leads to the largest savings in CO₂eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5\% CO₂eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.}, language = {en} } @incollection{LeichtScholtenSteuerDankert2020, author = {Leicht-Scholten, Carmen and Steuer-Dankert, Linda}, title = {Educating engineers for socially responsible solutions through design thinking}, series = {Design thinking in higher education: interdisciplinary encounters}, booktitle = {Design thinking in higher education: interdisciplinary encounters}, publisher = {Springer}, address = {Singapore}, isbn = {978-981-15-5780-4}, doi = {10.1007/978-981-15-5780-4}, pages = {229 -- 246}, year = {2020}, abstract = {There is a broad international discussion about rethinking engineering education in order to educate engineers to cope with future challenges, and particularly the sustainable development goals. In this context, there is a consensus about the need to shift from a mostly technical paradigm to a more holistic problem-based approach, which can address the social embeddedness of technology in society. Among the strategies suggested to address this social embeddedness, design thinking has been proposed as an essential complement to engineering precisely for this purpose. This chapter describes the requirements for integrating the design thinking approach in engineering education. We exemplify the requirements and challenges by presenting our approach based on our course experiences at RWTH Aachen University. The chapter first describes the development of our approach of integrating design thinking in engineering curricula, how we combine it with the Sustainable Development Goals (SDG) as well as the role of sustainability and social responsibility in engineering. Secondly, we present the course "Expanding Engineering Limits: Culture, Diversity, and Gender" at RWTH Aachen University. We describe the necessity to theoretically embed the method in social and cultural context, giving students the opportunity to reflect on cultural, national, or individual "engineering limits," and to be able to overcome them using design thinking as a next step for collaborative project work. The paper will suggest that the successful implementation of design thinking as a method in engineering education needs to be framed and contextualized within Science and Technology Studies (STS).}, language = {en} } @article{FoersterSchaepersKruegeretal.1995, author = {F{\"o}rster, Arnold and Sch{\"a}pers, T. and Kr{\"u}ger, M. and Appenzeller, J.}, title = {Effect of electron-electron interaction on hot ballistic electron beams / Th. Sch{\"a}pers ; M. Kr{\"u}ger ; J. Appenzeller ; A. F{\"o}rster ...}, series = {Applied physics letters. 66 (1995), H. 26}, journal = {Applied physics letters. 66 (1995), H. 26}, isbn = {0003-6951}, pages = {3603 -- 3606}, year = {1995}, language = {en} } @article{FoersterLangeGerthsen1993, author = {F{\"o}rster, Arnold and Lange, J. and Gerthsen, D.}, title = {Effect of interface roughness and scattering on the performance of AlAs/InGaAs resonant tunneling diodes}, series = {Journal of Vacuum Science \& Technology B: Microelectronics and Nanometer Structures. 11 (1993), H. 4}, journal = {Journal of Vacuum Science \& Technology B: Microelectronics and Nanometer Structures. 11 (1993), H. 4}, isbn = {1071-1023}, pages = {1743 -- 1747}, year = {1993}, language = {en} } @inproceedings{MilijašŠakićMarinkovićetal.2022, author = {Milijaš, Aleksa and Šakić, Bogdan and Marinković, Marko and Butenweg, Christoph and Gams, Matija and Klinkel, Sven}, title = {Effects of prior in-plane damage on out-of-plane response of masonry infills with openings}, series = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest}, booktitle = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest}, editor = {Arion, Cristian and Scupin, Alexandra and Ţigănescu, Alexandru}, isbn = {978-973-100-533-1}, pages = {2747 -- 2756}, year = {2022}, abstract = {Masonry infill walls are the most traditional enclosure system that is still widely used in RC frame buildings all over the world, particularly in seismic active regions. Although infill walls are usually neglected in seismic design, during an earthquake event they are subjected to in-plane and out-of-plane forces that can act separately or simultaneously. Since observations of damage to buildings after recent earthquakes showed detrimental effects of in-plane and out-of-plane load interaction on infill walls, the number of studies that focus on influence of in-plane damage on out-of-plane response has significantly increased. However, most of the xperimental campaigns have considered only solid infills and there is a lack of combined in-plane and out-of-plane experimental tests on masonry infills with openings, although windows and doors strongly affect seismic performance. In this paper, two types of experimental tests on infills with window openings are presented. The first is a pure out-of-plane test and the second one is a sequential in-plane and out-of-plane test aimed at investigating the effects of existing in-plane damage on outof-plane response. Additionally, findings from two tests with similar load procedure that were carried out on fully infilled RC frames in the scope of the same project are used for comparison. Test results clearly show that window opening increased vulnerability of infills to combined seismic actions and that prevention of damage in infills with openings is of the utmost importance for seismic safety.}, language = {en} } @article{AltayButenwegTaddei2013, author = {Altay, Okyay and Butenweg, Christoph and Taddei, Francesca}, title = {Effektivit{\"a}t von Schwingungsd{\"a}mpfern bei Windenergieanlagen}, series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt}, volume = {Band 88}, journal = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt}, number = {Heft 10}, publisher = {VDI Fachmedien}, address = {D{\"u}sseldorf}, issn = {1436-4867 (E-Journal); 0005-6650 (Print)}, pages = {S11 -- S17}, year = {2013}, language = {de} } @article{MohnkeSchuckel1985, author = {Mohnke, Andreas and Schuckel, G.}, title = {Eigenschaften des Schichtsystems ZnO/Glas f{\"u}r die Mikroakustik. Schuckel, G.; Mohnke, A.}, series = {Technische Hochschule Ilmenau / Bibliothek: Wissenschaftliche Zeitschrift. 31 (1985), H. 4}, journal = {Technische Hochschule Ilmenau / Bibliothek: Wissenschaftliche Zeitschrift. 31 (1985), H. 4}, isbn = {0043-6917}, pages = {157 -- 164}, year = {1985}, language = {de} } @book{Bruessermann1977, author = {Br{\"u}ssermann, Klaus}, title = {Ein Beitrag zur Bestimmung der radio{\"o}kologischen Auswirkungen durch Routineeinleitungen aus kerntechnischen Anlagen in Fließgew{\"a}sser}, publisher = {Technische Hochschule}, address = {Aachen}, pages = {IV, 122 S.}, year = {1977}, language = {de} }