@inproceedings{MilijašŠakićMarinkovićetal.2021,
  author    = {Milijaš, Aleksa and Šakić, Bogdan and Marinković, Marko and Butenweg, Christoph},
  title     = {Experimental investigation of behaviour of masonry infilled RC frames under out-of-plane loading},
  series = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  booktitle = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  editor    = {Papadrakakis, Manolis and Fragiadakis, Michalis},
  publisher = {National Technical University of Athens},
  address   = {Athen},
  isbn      = {978-618-85072-5-8},
  issn      = {2623-3347},
  doi       = {10.7712/120121.8528.18914},
  pages     = {829 -- 846},
  year      = {2021},
  abstract  = {Masonry infills are commonly used as exterior or interior walls in reinforced concrete (RC) frame structures and they can be encountered all over the world, including earthquake prone regions. Since the middle of the 20th century the behaviour of these non-structural elements under seismic loading has been studied in numerous experimental campaigns. However, most of the studies were carried out by means of in-plane tests, while there is a lack of out-of-plane experimental investigations. In this paper, the out-of-plane tests carried out on full scale masonry infilled frames are described. The results of the out-of-plane tests are presented in terms of force-displacement curves and measured out-of-plane displacements. Finally, the reliability of existing analytical approaches developed to estimate the out-of-plane strength of masonry infills is examined on presented experimental results.},
  language  = {en}
}
@inproceedings{ButenwegBursiNardinetal.2021,
  author    = {Butenweg, Christoph and Bursi, Oreste S. and Nardin, Chiara and Lanese, Igor and Pavese, Alberto and Marinković, Marko and Paolacci, Fabrizio and Quinci, Gianluca},
  title     = {Experimental investigation on the seismic performance of a multi-component system for major-hazard industrial facilities},
  series = {Pressure Vessels \& Piping Virtual Conference July 13-15, 2021},
  booktitle = {Pressure Vessels \& Piping Virtual Conference July 13-15, 2021},
  publisher = {American Society of Mechanical Engineers (ASME)},
  address   = {New York},
  isbn      = {9780791885352},
  doi       = {10.1115/PVP2021-61696},
  pages     = {8 Seiten},
  year      = {2021},
  abstract  = {Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous substances in industrial facilities. Nevertheless, the design of industrial plants is inadequately described in recent codes and guidelines, as they do not consider the dynamic interaction between the structure and the installations and thus the effect of seismic response of the installations on the response of the structure and vice versa. The current code-based approach for the seismic design of industrial facilities is considered not enough for ensure proper safety conditions against exceptional event entailing loss of content and related consequences. Accordingly, SPIF project (Seismic Performance of Multi-Component Systems in Special Risk Industrial Facilities) was proposed within the framework of the European H2020 - SERA funding scheme (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe). The objective of the SPIF project is the investigation of the seismic behaviour of a representative industrial structure equipped with complex process technology by means of shaking table tests. The test structure is a three-story moment resisting steel frame with vertical and horizontal vessels and cabinets, arranged on the three levels and connected by pipes. The dynamic behaviour of the test structure and of its relative several installations is investigated. Furthermore, both process components and primary structure interactions are considered and analyzed. Several PGA-scaled artificial ground motions are applied to study the seismic response at different levels. After each test, dynamic identification measurements are carried out to characterize the system condition. The contribution presents the experimental setup of the investigated structure and installations, selected measurement data and describes the obtained damage. Furthermore, important findings for the definition of performance limits, the effectiveness of floor response spectra in industrial facilities will be presented and discussed.},
  language  = {en}
}
@article{ButenwegMarinkovicSalatic2019,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Salatic, Ratko},
  title     = {Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-019-00602-7},
  pages     = {3397 -- 3422},
  year      = {2019},
  language  = {en}
}
@article{MarinkovićButenweg2022,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading},
  series = {Construction and Building Materials},
  volume    = {318},
  journal   = {Construction and Building Materials},
  number    = {1},
  editor    = {Ford, Michael C.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0526},
  doi       = {10.1016/j.conbuildmat.2021.126041},
  year      = {2022},
  abstract  = {Because of simple construction process, high energy efficiency, significant fire resistance and excellent sound isolation, masonry infilled reinforced concrete (RC) frame structures are very popular in most of the countries in the world, as well as in seismic active areas. However, many RC frame structures with masonry infills were seriously damaged during earthquake events, as the traditional infills are generally constructed with direct contact to the RC frame which brings undesirable infill/frame interaction. This interaction leads to the activation of the equivalent diagonal strut in the infill panel, due to the RC frame deformation, and combined with seismically induced loads perpendicular to the infill panel often causes total collapses of the masonry infills and heavy damages to the RC frames. This fact was the motivation for developing different approaches for improving the behaviour of masonry infills, where infill isolation (decoupling) from the frame has been more intensively studied in the last decade. In-plane isolation of the infill wall reduces infill activation, but causes the need for additional measures to restrain out-of-plane movements. This can be provided by installing steel anchors, as proposed by some researchers. Within the framework of European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in Reinforced Concrete Buildings) the system based on a use of elastomers for in-plane decoupling and steel anchors for out-of-plane restrain was tested. This constructive solution was tested and deeply investigated during the experimental campaign where traditional and decoupled masonry infilled RC frames with anchors were subjected to separate and combined in-plane ‬and out-of-plane loading. Based on a detailed evaluation and comparison of the test results, the performance and effectiveness of the developed system are illustrated.},
  language  = {en}
}
@article{ArpshofenGerlingSommeretal.1981,
  author    = {Arpshofen, Ingo and Gerling, Ulrich and Sommer, Ferdinand and Schultheiss, Emil and Predel, Bruno and Pool, M. J.},
  title     = {Experimentelle Bestimmung der integralen Mischungsenthalpien in den bin{\"a}ren Systemen Pd-Cu und Si-Cu bei 1600 K},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 72, H. 12},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 72, H. 12},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {842 -- 846},
  year      = {1981},
  language  = {de}
}
@article{KuhlmannButenwegBettzieche2006,
  author    = {Kuhlmann, Wolfram and Butenweg, Christoph and Bettzieche, Volker},
  title     = {Experimentelle und numerische Untersuchungen zur baudynamischen Beurteilung von Talsperren},
  series = {Wasserwirtschaft : Hydrologie, Wasserbau, Hydromechanik, Gew{\"a}sser, {\"O}kologie, Boden},
  volume    = {Band 96},
  journal   = {Wasserwirtschaft : Hydrologie, Wasserbau, Hydromechanik, Gew{\"a}sser, {\"O}kologie, Boden},
  number    = {Heft 5},
  issn      = {0043-0978 (E-Journal); 0043-0978 (Print)},
  pages     = {10 -- 16},
  year      = {2006},
  language  = {de}
}
@inproceedings{KuhlmannButenwegBettziecheetal.2004,
  author    = {Kuhlmann, Wolfram and Butenweg, Christoph and Bettzieche, Volker and Meskouris, Konstantin},
  title     = {Experimentelle und numerische Untersuchungen zur baudynamischen Beurteilung von Talsperren des Ruhrverbandes},
  series = {13. Deutsches Talsperrensymposium in Weimar},
  booktitle = {13. Deutsches Talsperrensymposium in Weimar},
  organization    = {Deutsches Talsperrensymposium <13, 2004, Weimar>},
  pages     = {1 -- 26},
  year      = {2004},
  language  = {de}
}
@article{BreitbachSchubertAhmed1987,
  author    = {Breitbach, Gerd and Schubert, F. and Ahmed, K.},
  title     = {Experimentelle und theoretische Untersuchungen zum Kriechbeulen von Rohren aus Ni Cr 22 Co 12 Mo bei 950 Cel / F. Schubert ; K. Ahmed ; G. Breitbach ...},
  series = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt der Beitrag der Komponenten- und Grossprobenpr{\"u}fung zur Beurteilung von Bauteilen und Anlagen : [8. - 9. Oktober 1987] / Staatliche Materialpr{\"u}fungsanstalt Universit{\"a}t Stuttgart. - Bd. 2 : Rohrleitungsversagen, Komponenten, Thermoschock, Hochtemperaturverhalten, Beh{\"a}lterintegrit{\"a}t, Schweissverbindungen : (Vortr{\"a}ge 29 - 51)},
  journal   = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt der Beitrag der Komponenten- und Grossprobenpr{\"u}fung zur Beurteilung von Bauteilen und Anlagen : [8. - 9. Oktober 1987] / Staatliche Materialpr{\"u}fungsanstalt Universit{\"a}t Stuttgart. - Bd. 2 : Rohrleitungsversagen, Komponenten, Thermoschock, Hochtemperaturverhalten, Beh{\"a}lterintegrit{\"a}t, Schweissverbindungen : (Vortr{\"a}ge 29 - 51)},
  publisher = {MPA},
  address   = {Stuttgart},
  pages     = {42.1 -- 42.18},
  year      = {1987},
  language  = {de}
}
@book{HelsperBesslingKiocketal.1979,
  author    = {Helsper, Christoph and Beßling, Harro and Kiock, R. and Fißan, H. J.},
  title     = {Experimentelle Untersuchung der Partikelanzahlkonzentration im Windkanal f{\"u}r den Einsatz von laseranemometrischen Verfahren / Beßling, Harro; Kiock, R.; Helsper, C.; Fißan, H. J.},
  publisher = {DFVLR},
  address   = {K{\"o}ln},
  pages     = {48 S.},
  year      = {1979},
  language  = {de}
}
@book{BreitbachNickelAltes1985,
  author    = {Breitbach, Gerd and Nickel, Manfred and Altes, J{\"u}rgen},
  title     = {Experimentelle Untersuchungen zur Eignung von Kanalsystemen f{\"u}r Linerleckortung und Dr{\"a}nage in einem Spannbetonbeh{\"a}lter / von M. Nickel ; G. Breitbach ; J. Altes ...},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {48, [44] S. : Ill., graph. Darst.},
  year      = {1985},
  language  = {de}
}
@article{Mueller2004,
  author    = {M{\"u}ller, Burghard},
  title     = {Export in den Iran, Libanon und nach Indien : die FH Aachen strebt nach Osten},
  series = {Die neue Hochschule : Nachrichten, Meinungen, Berichte. 45 (2004), H. 4-5},
  journal   = {Die neue Hochschule : Nachrichten, Meinungen, Berichte. 45 (2004), H. 4-5},
  isbn      = {0340-448x},
  pages     = {12 -- 15},
  year      = {2004},
  language  = {de}
}
@inproceedings{RensFerreinPoel2008,
  author    = {Rens, Gavin and Ferrein, Alexander and Poel, Etienne van der},
  title     = {Extending DTGolog to deal with POMD-Ps},
  series = {Proceedings of the Nineteenth Annual Symposium of the Pattern Recognition Association of South Africa (PRASA 2008)},
  booktitle = {Proceedings of the Nineteenth Annual Symposium of the Pattern Recognition Association of South Africa (PRASA 2008)},
  organization    = {Pattern Recognition Association of South Africa},
  pages     = {49 -- 54},
  year      = {2008},
  language  = {en}
}
@inproceedings{BirklDiendorferKernetal.2017,
  author    = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan},
  title     = {Extrem hohe Blitzstr{\"o}me},
  series = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg},
  booktitle = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg},
  isbn      = {978-3-8007-4459-6},
  pages     = {146 -- 152},
  year      = {2017},
  language  = {de}
}
@article{BirklDiendorferKernetal.2018,
  author    = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan},
  title     = {Extrem hohe Blitzstr{\"o}me},
  series = {Elektropraktiker},
  volume    = {72},
  journal   = {Elektropraktiker},
  number    = {3},
  publisher = {Huss Medien},
  address   = {Berlin},
  pages     = {217 -- 225},
  year      = {2018},
  abstract  = {Blitze sind nach wie vor eine enorme Schadensquelle f{\"u}r Personensch{\"a}den, Br{\"a}nde, mechanische Zerst{\"o}rungen und insbesondere auch {\"U}berspannungen. Das zeigen nicht zuletzt aktuelle Statistiken der Schadensversicherer. Immer wieder gibt es Meldungen {\"u}ber extrem hohe Blitzstr{\"o}me, die nat{\"u}rlich auch zu großen Sch{\"a}den und Zerst{\"o}rungen f{\"u}hren k{\"o}nnen. Dabei werden Scheitelwerte von teilweise deutlich {\"u}ber 300 kA genannt. Dies wirft Fragen auf, da die „klassische" Blitzstatistik (z. B. nach CIGRE und IEC [8][10]) bisher solche Werte nicht kennt. Diese extremen Blitzstr{\"o}me werden meist aus den Daten von Blitzortungssystemen ermittelt.},
  language  = {de}
}
@inproceedings{BirklDiendorferKernetal.2018,
  author    = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan},
  title     = {Extremely high lightning peak currents},
  series = {34th International Conference on Ligntning Protection, 02-07 September 2018},
  booktitle = {34th International Conference on Ligntning Protection, 02-07 September 2018},
  isbn      = {978-1-5386-6635-7},
  pages     = {7 Seiten},
  year      = {2018},
  language  = {en}
}
@article{FoersterAdamMikulicsetal.2002,
  author    = {F{\"o}rster, Arnold and Adam, R. and Mikulics, M. and Schelten, J.},
  title     = {Fabrication and subpicosecond optical response of low-temperature-grown GaAs freestanding photoconductive devices. Adam, R.; Mikulics, M.; Forster, A.; Schelten, J.; Siegel, M.; Kordos, P.; Zheng, X.; Wu, S.; Sobolewski, R.},
  series = {Applied Physics Letters. 81 (2002), H. 18},
  journal   = {Applied Physics Letters. 81 (2002), H. 18},
  isbn      = {1077-3118},
  pages     = {3485 -- 3487},
  year      = {2002},
  language  = {en}
}
@article{FoersterKicinCambeletal.2002,
  author    = {F{\"o}rster, Arnold and Kicin, S and Cambel, V. and Kuliffayova, M.},
  title     = {Fabrication of GaAs symmetric pyramidal mesas prepared by wet-chemical etching using AlAs interlayer. Kicin, S.; Cambel, V.; Kuliffayova, M.; Gregusova, D.; Kovacova, E.; Novak, J.; Kostic, I.; Forster, A.},
  series = {Journal of Applied Physics. 91 (2002), H. 2},
  journal   = {Journal of Applied Physics. 91 (2002), H. 2},
  isbn      = {1089-7550},
  pages     = {878 -- 880},
  year      = {2002},
  language  = {en}
}
@inproceedings{LeichtScholtenSteuerDankertBouffier2016,
  author    = {Leicht-Scholten, Carmen and Steuer-Dankert, Linda and Bouffier, Anna},
  title     = {Facing Future Challenges: Building Engineers for Tomorrow},
  series = {Conference proceedings : new perspectives in science education : 5th Conference edition, Florence, Italy, 17-18 March 2016},
  booktitle = {Conference proceedings : new perspectives in science education : 5th Conference edition, Florence, Italy, 17-18 March 2016},
  isbn      = {978-886292-705-5},
  pages     = {32 -- 37},
  year      = {2016},
  abstract  = {Future engineers are increasingly confronted with the so-called Megatrends which are the big social challenges society has to cope with. These Megatrends, such as "Silver Society", "Globalization", "Mobility" and "Female Shift" require an application-oriented perspective on Diversity especially in the engineering field. Therefore, it is necessary to enable future engineers not only to look at the technical perspectives of a problem, but also to be able to see the related questions within societies they are developing their artefacts for. The aim of teaching engineering should be to prepare engineers for these requirements and to draw attention to the diverse needs in a globalized world. Bringing together technical knowledge and social competences which go beyond a mere training of the so-called "soft skills", is a new approach followed at RWTH Aachen University, one of the leading technical universities in Germany. RWTH Aachen University has established the bridging professorship "Gender and Diversity in Engineering" (GDI) which educates engineers with an interdisciplinary approach to expand engineering limits. In the frame of a sustainable teaching concept the research group under the leadership of Prof. Carmen Leicht-Scholten has developed an approach which imparts a supplication-specific Gender and Diversity expertise to engineers. In workshops students gain theoretical knowledge about Gender and Diversity and learn how to transfer their knowledge in their special field of study and later work. To substantiate this, the course participants have to solve case studies from real life. The cases which are developed in collaboration with non-profit organizations and enterprises from economy rise the students to challenges which are inspired by professional life. Evaluation shows the success of this approach as well as an increasing demand for such teaching formats.},
  language  = {en}
}
@article{Goldbach2010,
  author    = {Goldbach, Daniel},
  title     = {Fahrstabilit{\"a}tserh{\"o}hung bei Gespannen durch Querverschiebung des Anh{\"a}ngerkupplungspunktes},
  series = {mechatronik mobil},
  volume    = {2},
  journal   = {mechatronik mobil},
  number    = {1},
  publisher = {Expert Verlag},
  address   = {Renningen},
  issn      = {1867-7371},
  pages     = {23 -- 29},
  year      = {2010},
  language  = {de}
}
@article{HelsperMoelterKaminski1989,
  author    = {Helsper, Christoph and M{\"o}lter, W. and Kaminski, S.},
  title     = {Fast and Automated Testing of Different Air Filter Media / M{\"o}lter, W. ; Helsper, C. ; Kaminski, S.},
  series = {1. Europ{\"a}isches Symposium Partikelabscheidung aus Gasen : [PARTEC, N{\"u}rnberg, West Germany, 19. - 21. April 1989 ; preprints] = 1. European Symposium Separation of Particles from Gases / [Organisation und Durchf{\"u}hrung: N{\"u}rnbergMesse]. Hrsg. von: Friedrich L{\"o}ffler},
  journal   = {1. Europ{\"a}isches Symposium Partikelabscheidung aus Gasen : [PARTEC, N{\"u}rnberg, West Germany, 19. - 21. April 1989 ; preprints] = 1. European Symposium Separation of Particles from Gases / [Organisation und Durchf{\"u}hrung: N{\"u}rnbergMesse]. Hrsg. von: Friedrich L{\"o}ffler},
  publisher = {N{\"u}rnbergMesse},
  address   = {N{\"u}rnberg},
  pages     = {441 -- 457},
  year      = {1989},
  language  = {en}
}
@article{HelsperMoelterKaminski1989,
  author    = {Helsper, Christoph and M{\"o}lter, W. and Kaminski, S.},
  title     = {Fast and Automated Testing of Different Air Filter Media / M{\"o}lter, W. ; Helsper, C. ; Kaminski, S.},
  series = {Proceedings of the Filtech Conference, Karlsruhe 1989, Vol. 1},
  journal   = {Proceedings of the Filtech Conference, Karlsruhe 1989, Vol. 1},
  publisher = {Filtration Society},
  address   = {Oadby},
  pages     = {125 -- 136},
  year      = {1989},
  language  = {en}
}
@article{HelsperMoelterWillemer1987,
  author    = {Helsper, Christoph and M{\"o}lter, W. and Willemer, W.},
  title     = {Fast and Automated Testing of Filter Media / M{\"o}lter, W. ; Helsper, C. ; Willemer, W.},
  series = {FILTECH Conference 1987 : Utrecht, Holland; September 23 - 25 1987 / org. by the Filtration Society , Vol. 1.},
  journal   = {FILTECH Conference 1987 : Utrecht, Holland; September 23 - 25 1987 / org. by the Filtration Society , Vol. 1.},
  publisher = {Filtration Society},
  address   = {Loughborough},
  pages     = {106 -- 112},
  year      = {1987},
  language  = {en}
}
@article{HelsperMoelterKaminski1992,
  author    = {Helsper, Christoph and M{\"o}lter, W. and Kaminski, S.},
  title     = {Fast, Automated Testing of Different Air Filter Media / M{\"o}lter, W. ; Helsper, C. ; Kaminski, S.},
  series = {Filtration and Separation. 29 (1992), H. 1},
  journal   = {Filtration and Separation. 29 (1992), H. 1},
  isbn      = {0015-1882},
  pages     = {45 -- 50},
  year      = {1992},
  language  = {en}
}
@article{FrauenrathHezelHeinrichsetal.2009,
  author    = {Frauenrath, Tobias and Hezel, Fabian and Heinrichs, Uwe and Kozerke, Sebastian and Utting, Jane and Kob, Malte and Butenweg, Christoph and Boesiger, Peter and Niendorf, Thoralf},
  title     = {Feasibility of Cardiac Gating Free of Interference With Electro-Magnetic Fields at 1.5 Tesla, 3.0 Tesla and 7.0 Tesla Using an MR-Stethoscope},
  series = {Investigative Radiology},
  volume    = {44},
  journal   = {Investigative Radiology},
  number    = {9},
  publisher = {Lippincott Williams \& Wilkins ; (via Ovid)},
  address   = {Philadelphia, Pa},
  issn      = {1536-0210 (online)},
  doi       = {10.1097/RLI.0b013e3181b4c15e},
  pages     = {539 -- 547},
  year      = {2009},
  language  = {en}
}
@article{VitusevichFoersterReetzetal.2000,
  author    = {Vitusevich, S. A. and F{\"o}rster, Arnold and Reetz, W. and L{\"u}th, H. and Belyaev, A. E. and Danylyuk, S. V.},
  title     = {Fine structure of photoresponse spectra in a double-barrier resonant tunnelling diode},
  series = {Nanotechnology. 11 (2000), H. 4},
  journal   = {Nanotechnology. 11 (2000), H. 4},
  isbn      = {1361-6528},
  pages     = {305 -- 308},
  year      = {2000},
  language  = {en}
}
@inproceedings{MartinBergHardtetal.1979,
  author    = {Martin, S. and Berg, G. and Hardt, Arno and H{\"u}rlimann, W. and K{\"o}hler, M. and Meißberger, J. and Sagefka, T. and Schult, O. W. B.},
  title     = {First experience with the magnet spectrometer 'BIG KARL'},
  series = {Use of magnetic spectrometers in nuclear physics : proceedings of the Daresbury study weekend 10 - 11 March 1979},
  booktitle = {Use of magnetic spectrometers in nuclear physics : proceedings of the Daresbury study weekend 10 - 11 March 1979},
  editor    = {Sanderson, N. E.},
  publisher = {Daresbury Lab.},
  address   = {Daresbury},
  pages     = {38 -- 42},
  year      = {1979},
  language  = {en}
}
@article{HoylerBauskeArias1993,
  author    = {Hoyler, Friedrich and Bauske, I. and Arias, J. M.},
  title     = {First observation of scissors mode states in an odd-mass nucleus / I. Bauske ; J. M. Arias ... F. Hoyler ...},
  series = {Physical review letters. 71 (1993), H. 7},
  journal   = {Physical review letters. 71 (1993), H. 7},
  isbn      = {0031-9007},
  pages     = {975 -- 978},
  year      = {1993},
  language  = {en}
}
@incollection{HebelHerrmannRitzetal.2022,
  author    = {Hebel, Christoph and Herrmann, Ulf and Ritz, Thomas and R{\"o}th, Thilo and Anthrakidis, Anette and B{\"o}ker, J{\"o}rg and Franzke, Till and Grodzki, Thomas and Merkens, Torsten and Sch{\"o}ttler, Mirjam},
  title     = {FlexSHARE - Methodisches Framework zur innovativen Gestaltung der urbanen Mobilit{\"a}t durch Sharing- Angebote},
  series = {Transforming Mobility - What Next?},
  booktitle = {Transforming Mobility - What Next?},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-36429-8},
  doi       = {10.1007/978-3-658-36430-4_10},
  pages     = {153 -- 169},
  year      = {2022},
  abstract  = {Das Ziel des INTERREG-Projektes „SHAREuregio" (FKZ: 34.EFRE-0300134) ist es, grenz{\"u}berschreitende Mobilit{\"a}t in der Euregio Rhein-Maas-Nord zu erm{\"o}glichen und zu f{\"o}rdern. Dazu soll ein elektromobiles Car- und Bikesharing- System entwickelt und in der Stadt M{\"o}nchengladbach, im Kreis Viersen sowie in den Gemeinden Roermond und Venlo (beide NL) zusammen mit den Partnern Wirtschaftsf{\"o}rderung M{\"o}nchengladbach, Wirtschaftsf{\"o}rderung f{\"u}r den Kreis Viersen, NEW AG, Goodmoovs (NL), Greenflux (NL) und der FH Aachen implementiert werden. Zun{\"a}chst richtet sich das Angebot, bestehend aus 40 Elektroautos und 40 Elektrofahrr{\"a}dern, an Unternehmen und wird nach einer Erprobungsphase, mit einer gr{\"o}ßeren Anzahl an Fahrzeugen, auch f{\"u}r Privatpersonen verf{\"u}gbar gemacht werden. Die Fahrzeuge stehen bei den jeweiligen Anwendungspartnern in Deutschland und den Niederlanden. Im Rahmen dieses Projektes hat die FH Aachen „FlexSHARE" entwickelt - ein methodisches Framework zur innovativen Gestaltung urbaner Sharing- Angebote. Das Framework erm{\"o}glicht es, anhand von messbaren Kenngr{\"o}ßen, bedarfsgerechte und auf die Region abgestimmte Sharing-Systeme zu entwickeln.},
  language  = {de}
}
@article{PauksztatKuperjansMeyer2005,
  author    = {Pauksztat, Anja and Kuperjans, Isabel and Meyer, J{\"o}rg},
  title     = {Formeln statt Zahlen : Referenzwerte Formeln zur energetischen Bewertung von Produktionsanlagen},
  series = {BWK : das Energie-Fachmagazin},
  volume    = {57},
  journal   = {BWK : das Energie-Fachmagazin},
  number    = {12},
  issn      = {0006-9612},
  pages     = {52 -- 55},
  year      = {2005},
  language  = {de}
}
@article{SchwarzerGoettscheJellinghaus2006,
  author    = {Schwarzer, Klemens and G{\"o}ttsche, Joachim and Jellinghaus, Sabine},
  title     = {FORSCHUNG UND TECHNIK - Messtechnik - Was will der Nutzer? - Eine langfristige Studie hat Nutzer zu einer Farblichtsteuerung befragt. Teil 1: Untersuchungsdesign, Leuchtenentwicklung und Messwerterfassung},
  series = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 7-8},
  journal   = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 7-8},
  isbn      = {0024-2861},
  pages     = {754 -- 759},
  year      = {2006},
  language  = {de}
}
@article{SchwarzerGoettscheJellinghaus2006,
  author    = {Schwarzer, Klemens and G{\"o}ttsche, Joachim and Jellinghaus, Sabine},
  title     = {FORSCHUNG UND TECHNIK - Messtechnik - Was will der Nutzer? Eine langfristige Studie hat Nutzer zu einer Farblichtsteuerung befragt (Teil 2)},
  series = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 9},
  journal   = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 9},
  isbn      = {0024-2861},
  pages     = {862 -- 867},
  year      = {2006},
  language  = {de}
}
@article{FleischhakerEvers2008,
  author    = {Fleischhaker, Robert and Evers, J{\"o}rg},
  title     = {Four-wave mixing enhanced white-light cavity},
  series = {Physical Review A - Atomic, molecular, and optical physics},
  volume    = {78},
  journal   = {Physical Review A - Atomic, molecular, and optical physics},
  number    = {5},
  issn      = {0556-2791},
  pages     = {051802(R)},
  year      = {2008},
  language  = {en}
}
@inproceedings{RajanButenwegDalgueretal.2017,
  author    = {Rajan, S. and Butenweg, Christoph and Dalguer, L. A. and An, J. H. and Renault, P. and Klinkel, S.},
  title     = {Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013},
  series = {16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  year      = {2017},
  language  = {en}
}
@inproceedings{MichelButenwegKlinkel2018,
  author    = {Michel, Philipp and Butenweg, Christoph and Klinkel, Sven},
  title     = {Frequency Dependent Impedance Analysis of the Foundation-Soil-Systems of Onshore Wind Turbines},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 13},
  year      = {2018},
  language  = {en}
}
@incollection{GoldbachHochrein2011,
  author    = {Goldbach, Daniel and Hochrein, Ulrich},
  title     = {Functional Safety Management und Analysemethoden in der Entwicklung eines sicherheitskritischen Systems im Automobil},
  series = {Diagnose in mechatronischen Fahrzeugsystemen IV : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : [anl{\"a}sslich der 5. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen"]},
  booktitle = {Diagnose in mechatronischen Fahrzeugsystemen IV : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : [anl{\"a}sslich der 5. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen"]},
  publisher = {Expert Verlag},
  address   = {Renningen},
  isbn      = {978-3-8169-3068-6},
  pages     = {175 -- 194},
  year      = {2011},
  language  = {de}
}
@article{LandersKern2011,
  author    = {Landers, Ernst Ulrich and Kern, Alexander},
  title     = {Future evolution of risk management for structures : Advancement for the future IEC 62305-2 Ed3},
  publisher = {IEEE},
  address   = {New York},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@book{Doeren2004,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {F{\"u}getechnik, Schweißtechnik / Horst-Peter D{\"o}ren (Hrsg.).- 6. Aufl.},
  publisher = {DVS Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-786-2},
  pages     = {392 S.},
  year      = {2004},
  language  = {de}
}
@book{Doeren2007,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {F{\"u}getechnik, Schweißtechnik / Horst-Peter D{\"o}ren (Hrsg.).- 7., aktualis. Aufl.},
  publisher = {DVS Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-87155-907-5},
  pages     = {392 S.},
  year      = {2007},
  language  = {de}
}
@book{Doeren2012,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {F{\"u}getechnik, Schweißtechnik. Horst-Peter D{\"o}ren (Hrsg.).- 8., aktualis. und erw. Aufl.},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-87155-999-0},
  pages     = {411 S.: Ill., graph. Darst.},
  year      = {2012},
  language  = {de}
}
@article{FoersterKohleickLueth1993,
  author    = {F{\"o}rster, Arnold and Kohleick, R. and L{\"u}th, H.},
  title     = {Ga segregation and the effect of Si and Ge interlayers at the GaAs(100)/AlAs heterostructure / R. Kohleick ; A. F{\"o}rster ; H. L{\"u}th},
  series = {Physical Review B . 48 (1993), H. 20},
  journal   = {Physical Review B . 48 (1993), H. 20},
  isbn      = {0163-1829},
  pages     = {15138 -- 15143},
  year      = {1993},
  language  = {en}
}
@article{HoylerHamadaHamilton1987,
  author    = {Hoyler, Friedrich and Hamada, S. A. and Hamilton, W. D.},
  title     = {Gamma-gamma directional correlation measurements in 84Kr following thermal neutron capture by natural krypton / S. A. Hamada ; W. D. Hamilton ; F. Hoyler},
  series = {Journal of physics / G. 13 (1987), H. 9},
  journal   = {Journal of physics / G. 13 (1987), H. 9},
  isbn      = {0305-4616},
  pages     = {1143 -- 1163},
  year      = {1987},
  language  = {en}
}
@book{BreitbachDavidNickel1984,
  author    = {Breitbach, Gerd and David, H.-P. and Nickel, M.},
  title     = {Gasaustausch zwischen einem Helium enthaltenden Beh{\"a}lter und der Umgebung {\"u}ber ein nach unten abgehendes Rohr und dessen Relevanz f{\"u}r den HTR-Modul / [KFA, Kernforschungsanlage J{\"u}lich, GmbH, Inst. f{\"u}r Nukleare Sicherheitsforschung]},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {16, 14 S. : 14 Ill. u. graph. Darst.},
  year      = {1984},
  language  = {de}
}
@book{MeskourisRenaultButenwegetal.2007,
  author    = {Meskouris, Konstantin and Renault, Philippe and Butenweg, Christoph and Hinzen, Klaus-G. and Weber, Bernd},
  title     = {Gef{\"a}hrdungsabsch{\"a}tzung von Br{\"u}cken in Deutschland unter Erdbebenbelastung. [Bericht zum Forschungs- und Entwicklungsvorhaben FE 15.393/2003/FRB des Bundesministeriums f{\"u}r Verkehr, Bau und Stadtentwicklung.] (Forschung Straßenbau und Straßenverkehrstechnik ; 952)},
  publisher = {Bundesministerium f{\"u}r Verkehr, Bau und Stadtentwicklung, Abt. Straßenbau, Straßenverkehr},
  address   = {Bonn},
  isbn      = {978-3-86509-602-9},
  pages     = {80 S.},
  year      = {2007},
  language  = {de}
}
@article{ThielemannSchaffner1996,
  author    = {Thielemann, Frank and Schaffner, M.},
  title     = {Gemeinsam sind wir stark . Schaffner, M.; Thielemann, F.},
  series = {Print \& Produktion. 9 (1996), H. 10},
  journal   = {Print \& Produktion. 9 (1996), H. 10},
  isbn      = {0944-7482},
  pages     = {28 -- f.},
  year      = {1996},
  language  = {de}
}
@article{FoersterMikulicsSiebeetal.2002,
  author    = {F{\"o}rster, Arnold and Mikulics, M. and Siebe, F. and Fox, A.},
  title     = {Generation of 460 GHz radiation by photomixing in low-temperature-grown MBE GaAs. Mikulics, M.; Siebe, F.; Fox, A.; Marso, M.; Forster, A.; Stuer, H.; Schafer, F.; Gusten, R.; Kordos, P.},
  series = {Conference proceedings : Smolenice Castle, Slovakia, October 14 - 16, 2002 / [organizers: Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by Juraj Breza},
  journal   = {Conference proceedings : Smolenice Castle, Slovakia, October 14 - 16, 2002 / [organizers: Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by Juraj Breza},
  publisher = {IEEE Operations Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-7276-X},
  pages     = {129 -- 132},
  year      = {2002},
  language  = {en}
}
@article{MikulicsCamaraHardtetal.2004,
  author    = {Mikulics, M. and Camara, I. and Hardt, A. van der and Fox, A. and F{\"o}rster, Arnold and Gusten, R. and L{\"u}th, H. and Kordos, P.},
  title     = {Generation of THz radiation by photomixing in low-temperature-grown MBE GaAs},
  series = {Fifth International Conference on Advanced Semiconductor Devices and Microsystems : conference proceedings ; Smolenice Castle, Slovakia, October 17 - 21, 2004 / [organizers: Institute of Electrical Engineering, Slovak Academy of Sciences, Bratislava and Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by J. Osvald},
  journal   = {Fifth International Conference on Advanced Semiconductor Devices and Microsystems : conference proceedings ; Smolenice Castle, Slovakia, October 17 - 21, 2004 / [organizers: Institute of Electrical Engineering, Slovak Academy of Sciences, Bratislava and Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by J. Osvald},
  publisher = {IEEE Operations Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-8335-7},
  pages     = {231 -- 234},
  year      = {2004},
  language  = {en}
}
@inproceedings{HellmannsHesse2007,
  author    = {Hellmanns, Mark and Hesse, Joachim},
  title     = {Ger{\"a}uschminderung und Leichtbau in Leistungsgetrieben durch den Einsatz von Werkstoffverbunden},
  series = {Hybride Maschinenkonzepte und intelligente Verfahren zur Fertigung von High-Tech-Produkten : Erfolgsbeispiele zur Standortsicherung in Hochlohnl{\"a}ndern : InnoNet Kolloquium am 7. und 8.11.2007, Technologiezentrum am Europaplatz Aachen},
  booktitle = {Hybride Maschinenkonzepte und intelligente Verfahren zur Fertigung von High-Tech-Produkten : Erfolgsbeispiele zur Standortsicherung in Hochlohnl{\"a}ndern : InnoNet Kolloquium am 7. und 8.11.2007, Technologiezentrum am Europaplatz Aachen},
  pages     = {1 -- 46},
  year      = {2007},
  language  = {de}
}
@techreport{HellmannsHesse2007,
  author    = {Hellmanns, Mark and Hesse, Joachim},
  title     = {Ger{\"a}uschminderung und Leichtbau in Leistungsgetrieben durch den Einsatz von Werkstoffverbunden : Abschlussbericht zu Nr. 3.1 : Berichtszeitraum: 1.3.2005 - 31.8.2007},
  publisher = {Bundesministerium f{\"u}r Wirtschaft und Arbeit (BMWi)},
  address   = {Berlin},
  pages     = {66 S.},
  year      = {2007},
  language  = {de}
}
@incollection{BorchertBremen2014,
  author    = {Borchert, J{\"o}rg and Bremen, Frank},
  title     = {Gesch{\"a}fts- und Organisationsmodelle f{\"u}r ein Strom- und Gas-Portfoliomanagement},
  series = {Optimierte Strom- und Gasbeschaffung in der Energiewirtschaftsbranche},
  booktitle = {Optimierte Strom- und Gasbeschaffung in der Energiewirtschaftsbranche},
  publisher = {KS-Energy-Verl.},
  address   = {Berlin},
  isbn      = {978-3-9813142-9-8},
  pages     = {11 -- 28},
  year      = {2014},
  language  = {de}
}
@article{KuperjansEsserMeyeretal.2000,
  author    = {Kuperjans, Isabel and Esser, J. and Meyer, J{\"o}rg and Donner, O.},
  title     = {Gestaltung und Bewertung von Energieanlagen unter {\"o}kologischen, wirtschaftlichen und technischen Gesichtspunkten},
  series = {Umweltwirtschaftsforum : UWF},
  volume    = {8},
  journal   = {Umweltwirtschaftsforum : UWF},
  number    = {3},
  issn      = {0943-3481},
  pages     = {53 -- 58},
  year      = {2000},
  language  = {de}
}
@inproceedings{RosinHenneboehlButenweg2015,
  author    = {Rosin, J. and Henneb{\"o}hl, B. and Butenweg, Christoph},
  title     = {Globale Stabilit{\"a}tsanalysen zylindrischer, seismisch belasteter Tanks auf numerischer Grundlage},
  series = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  booktitle = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  publisher = {SGEB},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <14, 2015, Z{\"u}rich>},
  isbn      = {978-3-03732-060-0},
  pages     = {173 -- 180},
  year      = {2015},
  language  = {de}
}
@inproceedings{SchulteSchwagerNoureldinetal.2023,
  author    = {Schulte, Jonas and Schwager, Christian and Noureldin, Kareem and May, Martin and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Gradient controlled startup procedure of a molten-salt power-to-heat energy storage plant based on dynamic process simulation},
  series = {SolarPACES: Solar Power \& Chemical Energy Systems},
  booktitle = {SolarPACES: Solar Power \& Chemical Energy Systems},
  number    = {2815 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4623-6},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0148741},
  pages     = {9 Seiten},
  year      = {2023},
  abstract  = {The integration of high temperature thermal energy storages into existing conventional power plants can help to reduce the CO2 emissions of those plants and lead to lower capital expenditures for building energy storage systems, due to the use of synergy effects [1]. One possibility to implement that, is a molten salt storage system with a powerful power-to-heat unit. This paper presents two possible control concepts for the startup of the charging system of such a facility. The procedures are implemented in a detailed dynamic process model. The performance and safety regarding the film temperatures at heat transmitting surfaces are investigated in the process simulations. To improve the accuracy in predicting the film temperatures, CFD simulations of the electrical heater are carried out and the results are merged with the dynamic model. The results show that both investigated control concepts are safe regarding the temperature limits. The gradient controlled startup performed better than the temperature-controlled startup. Nevertheless, there are several uncertainties that need to be investigated further.},
  language  = {en}
}
@incollection{MottaghyMajorowiczRath2009,
  author    = {Mottaghy, Darius and Majorowicz, Jacek and Rath, Volker},
  title     = {Ground Surface Temperature Histories Reconstructed from Boreholes in Poland: Implications for Spatial Variability},
  series = {The Polish Climate in the European Context: An Historical Overview},
  booktitle = {The Polish Climate in the European Context: An Historical Overview},
  publisher = {Springer Science+Business Media},
  address   = {Dordrecht},
  isbn      = {978-90-481-3167-9},
  doi       = {10.1007/978-90-481-3167-9_17},
  pages     = {375 -- 387},
  year      = {2009},
  language  = {en}
}
@article{MahmoudiFleischhakerSahraietal.2008,
  author    = {Mahmoudi, Mohammad and Fleischhaker, Robert and Sahrai, Mostafa and Evers, J{\"o}rg},
  title     = {Group velocity control in the ultraviolet domain via interacting dark-state resonances},
  series = {Journal of physics B: Atomic, molecular and optical physics},
  volume    = {41},
  journal   = {Journal of physics B: Atomic, molecular and optical physics},
  number    = {2},
  issn      = {0953-4075},
  doi       = {10.1088/0953-4075/41/2/025504},
  pages     = {25504 -- 25600},
  year      = {2008},
  language  = {en}
}
@article{FoersterLentzenGerthsen1992,
  author    = {F{\"o}rster, Arnold and Lentzen, M. and Gerthsen, D.},
  title     = {Growth mode and strain relaxation during the initial stage of InxGa1-xAs growth on GaAs(001) / M. Lentzen ; D. Gerthsen ; A. F{\"o}rster ...},
  series = {Applied physics letters. 60 (1992), H. 1},
  journal   = {Applied physics letters. 60 (1992), H. 1},
  isbn      = {0003-6951},
  pages     = {74 -- 76},
  year      = {1992},
  language  = {en}
}
@article{FoersterTillmannGerthsen1995,
  author    = {F{\"o}rster, Arnold and Tillmann, K. and Gerthsen, D.},
  title     = {Growth morphology and misfit relaxation of MBE-grown In0.6 G0.4 As on GaAs(001) / K. Tillmann ; D. Gerthsen ; A. F{\"o}rster ...},
  series = {Thin solid films. 261 (1995), H. 1-2},
  journal   = {Thin solid films. 261 (1995), H. 1-2},
  isbn      = {0040-6090},
  pages     = {139 -- 147},
  year      = {1995},
  language  = {en}
}
@article{FoersterKlemradtFunkeetal.1996,
  author    = {F{\"o}rster, Arnold and Klemradt, U. and Funke, M. and Fromm, M},
  title     = {Growth-induced interface roughness of GaAs/AlAs-layers studied by X-ray scattering under grazing angles / U. Klemradt ; M. Funke ; M. Fromm ... A F{\"o}rster},
  series = {Physica B: condensed matter. 221 (1996), H. 1-4},
  journal   = {Physica B: condensed matter. 221 (1996), H. 1-4},
  isbn      = {0921-4526},
  pages     = {27 -- 33},
  year      = {1996},
  language  = {en}
}
@book{Schwarzer1999,
  author    = {Schwarzer, Klemens},
  title     = {Gutachten zu m{\"o}glichen Strahlenexpositionen durch {\"a}ußere radioaktive Kontaminationen an Transportbeh{\"a}ltern oder Transportwaggons beim Transport von abgebrannten Brennelementen nach Frankreich / Auftraggeber: Staatsanwaltschaft Hanau},
  publisher = {IBEU, Ing.-B{\"u}ro f{\"u}r Energie- u. Umweltechnik},
  address   = {J{\"u}lich},
  pages     = {XII, 91 S., Anhang : graph. Darst.},
  year      = {1999},
  language  = {de}
}
@article{Kuperjans2011,
  author    = {Kuperjans, Isabel},
  title     = {Gute Planung ist alles : Energieeffizienz in der Pharmaproduktion},
  series = {Pharma + Food},
  volume    = {2011},
  journal   = {Pharma + Food},
  number    = {2},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  issn      = {1434-8942},
  pages     = {8 -- 10},
  year      = {2011},
  language  = {de}
}
@article{Bruessermann1989,
  author    = {Br{\"u}ssermann, Klaus},
  title     = {H3 and C14 air monitoring according to KTA 1503.1},
  series = {2. Karlsruhe international conference on analytical chemistry in nuclear technology, Karlsruhe (Germany), 5-9 Jun 1989},
  journal   = {2. Karlsruhe international conference on analytical chemistry in nuclear technology, Karlsruhe (Germany), 5-9 Jun 1989},
  pages     = {223},
  year      = {1989},
  language  = {en}
}
@article{FoersterBetkoMorvicetal.1996,
  author    = {F{\"o}rster, Arnold and Betko, J. and Morvic, M. and Novak, J.},
  title     = {Hall mobility analysis in low-temperature-grown molecular-beam epitaxial GaAs / J. Betko , M. Morvic ; J. Nov{\´a}k ... A. F{\"o}rster ...},
  series = {Applied physics letters. 69 (1996), H. 17},
  journal   = {Applied physics letters. 69 (1996), H. 17},
  isbn      = {0003-6951},
  pages     = {2563 -- 2565},
  year      = {1996},
  language  = {en}
}
@article{EweKleinPieperetal.2009,
  author    = {Ewe, Hendrik and Klein, Peter and Pieper, Martin and F{\"u}ldner, G.},
  title     = {Heat conductivity in sintered aluminium fibers},
  series = {Cellular metals for structural and functional applications : CELLMET 2008 ; proceedings of the International Symposium on Cellular Metals for Structural and Functional Applications held October 8 - 10, 2008 in Dresden, Germany / ed. by G{\"u}nter Stephani},
  journal   = {Cellular metals for structural and functional applications : CELLMET 2008 ; proceedings of the International Symposium on Cellular Metals for Structural and Functional Applications held October 8 - 10, 2008 in Dresden, Germany / ed. by G{\"u}nter Stephani},
  publisher = {Fraunhofer IFAM},
  address   = {Dresden},
  pages     = {187 -- 193},
  year      = {2009},
  language  = {en}
}
@article{AlebouyehSamamiPieperBreitbachetal.2014,
  author    = {Alebouyeh Samami, Behzad and Pieper, Martin and Breitbach, Gerd and Hodapp, Josef},
  title     = {Heat production in the windings of the stators of electric machines under stationary condition},
  series = {Heat and mass transfer},
  volume    = {50},
  journal   = {Heat and mass transfer},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {0947-7411 (Print) ; 1432-1181 (E-Journal)},
  doi       = {10.1007/s00231-014-1371-8},
  pages     = {1707 -- 1716},
  year      = {2014},
  abstract  = {In electric machines due to high currents and resistive losses (joule heating) heat is produced. To avoid damages by overheating the design of effective cooling systems is required. Therefore the knowledge of heat sources and heat transfer processes is necessary. The purpose of this paper is to illustrate a good and effective calculation method for the temperature analysis based on homogenization techniques. These methods have been applied for the stator windings in a slot of an electric machine consisting of copper wires and resin. The key quantity here is an effective thermal conductivity, which characterizes the heterogeneous wire resin-arrangement inside the stator slot. To illustrate the applicability of the method, the analysis of a simplified, homogenized model is compared with the detailed analysis of temperature behavior inside a slot of an electric machine according to the heat generation. We considered here only the stationary situation. The achieved numerical results are accurate and show that the applied homogenization technique works in practice. Finally the results of simulations for the two cases, the original model of the slot and the homogenized model chosen for the slot (unit cell), are compared to experimental results.},
  language  = {en}
}
@book{Dielmann1982,
  author    = {Dielmann, Klaus-Peter},
  title     = {Heißgasventilatoren f{\"u}r den Industrieofenbau},
  publisher = {Techn. Hochsch.},
  address   = {Aachen},
  pages     = {133 S.},
  year      = {1982},
  language  = {de}
}
@article{DielmannKramer1982,
  author    = {Dielmann, Klaus-Peter and Kramer, C.},
  title     = {Heißgasventilatoren f{\"u}r den Industrieofenbau / C. Kramer ; K.-P. Dielmann},
  series = {Gasw{\"a}rme international : Gasanwendung in Industrie und Gewerbe. 31 (1982), H. 10},
  journal   = {Gasw{\"a}rme international : Gasanwendung in Industrie und Gewerbe. 31 (1982), H. 10},
  isbn      = {0020-9384},
  pages     = {461 -- 467},
  year      = {1982},
  language  = {de}
}
@article{FoersterOhlerDaniels1998,
  author    = {F{\"o}rster, Arnold and Ohler, C. and Daniels, C.},
  title     = {Heterojunction band offsets and Schottky-barrier heights: Tersoff's theory in the presence of strain / C. Ohler ; C. Daniels ; A. F{\"o}rster ...},
  series = {Physical review / B, Condensed matter and materials physics. 58 (1998), H. 12},
  journal   = {Physical review / B, Condensed matter and materials physics. 58 (1998), H. 12},
  isbn      = {1095-3795},
  pages     = {7864 -- 7871},
  year      = {1998},
  language  = {en}
}
@article{HoylerKesslerGreene1988,
  author    = {Hoyler, Friedrich and Kessler, E. G. and Greene, G. L.},
  title     = {High accuracy, absolute wavelength determination of capture gamma-ray energies for E\&\#8804;5 MeV and the direct determination of binding energies in light nuclei / E.G. Kessler ; G. L. Greene ... F. Hoyler},
  series = {Journal of Physics G. 14 (1988), H. S},
  journal   = {Journal of Physics G. 14 (1988), H. S},
  isbn      = {0305-4616},
  pages     = {S167 -- S174},
  year      = {1988},
  language  = {en}
}
@incollection{HoffschmidtAlexopoulosGoettscheetal.2022,
  author    = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and G{\"o}ttsche, Joachim and Sauerborn, Markus and Kaufhold, O.},
  title     = {High Concentration Solar Collectors},
  series = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  booktitle = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-12-819734-9},
  doi       = {10.1016/B978-0-12-819727-1.00058-3},
  pages     = {198 -- 245},
  year      = {2022},
  abstract  = {Solar thermal concentrated power is an emerging technology that provides clean electricity for the growing energy market. To the solar thermal concentrated power plant systems belong the parabolic trough, the Fresnel collector, the solar dish, and the central receiver system. For high-concentration solar collector systems, optical and thermal analysis is essential. There exist a number of measurement techniques and systems for the optical and thermal characterization of the efficiency of solar thermal concentrated systems. For each system, structure, components, and specific characteristics types are described. The chapter presents additionally an outline for the calculation of system performance and operation and maintenance topics. One main focus is set to the models of components and their construction details as well as different types on the market. In the later part of this article, different criteria for the choice of technology are analyzed in detail.},
  language  = {en}
}
@article{FoersterMontanariLepsaetal.2005,
  author    = {F{\"o}rster, Arnold and Montanari, Simone and Lepsa, Mihail Ion and L{\"u}th, Hans},
  title     = {High frequency investigation of graded gap injectors for GaAs Gunn diodes / Simone Montanari ; Arnold F{\"o}rster ; Mihail Ion Lepsa ; Hans L{\"u}th},
  series = {Solid-state electronics. 49 (2005), H. 2},
  journal   = {Solid-state electronics. 49 (2005), H. 2},
  isbn      = {0038-1101},
  pages     = {245 -- 250},
  year      = {2005},
  language  = {en}
}
@article{BreitbachDeschkaAkiba1992,
  author    = {Breitbach, Gerd and Deschka, S. and Akiba, M.},
  title     = {High heat flux tests on brazed divertor components in electron and ion beam test facilities / S. Deschka ; M. Akiba ; G. Breitbach ...},
  series = {International journal of refractory metals and hard materials. 11 (1992), H. 6},
  journal   = {International journal of refractory metals and hard materials. 11 (1992), H. 6},
  isbn      = {0263-4368},
  pages     = {367 -- 375},
  year      = {1992},
  language  = {en}
}
@article{FoersterBruggerMeiners1991,
  author    = {F{\"o}rster, Arnold and Brugger, H. and Meiners, U.},
  title     = {High quality GaAs-based resonant tunneling diodes for high frequency device applications / H. Brugger ; U. Meiners ; C. W{\"o}lk ... A. F{\"o}rster ...},
  series = {Proceedings : August 5 - 7, 1991, Cornell University, Ithaca, New York / R. J. Trew, General Chairman},
  journal   = {Proceedings : August 5 - 7, 1991, Cornell University, Ithaca, New York / R. J. Trew, General Chairman},
  publisher = {Inst. of Electrical and Electronics Engineers},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-0491-8},
  pages     = {39 -- ff.},
  year      = {1991},
  language  = {en}
}
@article{FoersterHuVerghese1996,
  author    = {F{\"o}rster, Arnold and Hu, Quing and Verghese, S.},
  title     = {High-frequency (f ~ 1 THz) studies of quantum-effect devices / Qing Hu ; S. Verghese ; R. A. Wyss ... A. F{\"o}rster},
  series = {Semiconductor science and technology. 11 (1996), H. 12},
  journal   = {Semiconductor science and technology. 11 (1996), H. 12},
  isbn      = {1361-6641},
  pages     = {1888 -- 1894},
  year      = {1996},
  language  = {en}
}
@article{Mohnke1987,
  author    = {Mohnke, Andreas},
  title     = {High-rate sputtering of zinc oxide with a funnel-shaped magnetic field: Effect of the target thickness on the layer properties},
  series = {Vakuum-Technik. 36 (1987), H. 5},
  journal   = {Vakuum-Technik. 36 (1987), H. 5},
  isbn      = {0042-2266},
  pages     = {148 -- 151},
  year      = {1987},
  language  = {en}
}
@article{KollerStellberg1987,
  author    = {Koller, R. and Stellberg, Michael},
  title     = {Hilfsmittel zum systematischen Konstruieren : Ordnen von Spannverbindungen},
  series = {Industrie-Anzeiger. Bd. 109 (1987), H. 24},
  journal   = {Industrie-Anzeiger. Bd. 109 (1987), H. 24},
  issn      = {0019-9036},
  pages     = {28 - 29 -- 31 - 32},
  year      = {1987},
  language  = {de}
}
@article{ButenwegFehling2012,
  author    = {Butenweg, Christoph and Fehling, Ekkehard},
  title     = {Hintergrund f{\"u}r die vereinfachten Regeln bei Mauerwerksgeb{\"a}uden im Erdbebenfall},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 16},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201200537},
  pages     = {127 -- 137},
  year      = {2012},
  abstract  = {Bei der Ausarbeitung des nationalen Anwendungsdokumentes zur DIN EN 1998-1 waren die in der ENV-Fassung enthaltenen vereinfachten Regeln im Lichte aktueller Forschungsergebnisse zu {\"u}berpr{\"u}fen und zu {\"u}berarbeiten. Die gleiche Aufgabe stellte sich auch f{\"u}r die Neufassung der DIN 4149. In beiden F{\"a}llen sind neben konstruktiven Regeln f{\"u}r die Art und Anordnung der zur Geb{\"a}udeaussteifung heranzuziehenden W{\"a}nde im Grundriss Tabellen enthalten, die unter bestimmten Bedingungen den Entfall eines rechnerischen Nachweises der Tragw{\"a}nde im Erdbebenfall erm{\"o}glichen. Dies ist f{\"u}r Schwachbebengebiete, wie sie in Deutschland und anderen L{\"a}ndern Mitteleuropas anzutreffen sind, sinnvoll, um unn{\"o}tigen Rechenaufwand sowie Probleme mit der F{\"u}hrbarkeit von Nachweisen so weit wie m{\"o}glich auszuschalten. Im vorliegenden Beitrag werden die Hintergr{\"u}nde der vereinfachten Regeln diskutiert und die Ergebnisse der Anwendung mit verschiedenen Rechenverfahren verglichen und bewertet.},
  language  = {de}
}
@article{FoersterMalindretosIndlekoferetal.2002,
  author    = {F{\"o}rster, Arnold and Malindretos, J{\"o}rg and Indlekofer, Klaus Michael and Lepsa, Mihail Ion},
  title     = {Homogeneity analysis of ion-implanted resonant tunnelling diodes for applications in digital logic circuits. Malindretos, J{\"o}rg; F{\"o}rster, Arno; Indlekofer, Klaus Michael; Lepsa, Mihail Ion; Hardtdegen, Hilde; Schmidt, Roland; Luth, Hans},
  series = {Superlattices and Microstructures. 31 (2002), H. 6},
  journal   = {Superlattices and Microstructures. 31 (2002), H. 6},
  isbn      = {0749-6036},
  pages     = {315 -- 325},
  year      = {2002},
  language  = {en}
}
@article{HoskensRoerTolstikhinetal.2000,
  author    = {Hoskens, R.C.P. and Roer, T.G. van de and Tolstikhin, V.I. and F{\"o}rster, Arnold},
  title     = {Hot electron injection laser: vertically integrated transistor-laser structure for high-speed, low-chirp direct modulation},
  series = {LEOS 2000 : 2000 IEEE annual meeting conference proceedings; 13th annual meeting; IEEE Lasers and Electro-Optics Society 2000 annual meeting; 13-16 November 2000, The Westin Rio Mar Beach, Rio Grande, Puerto Rico. Vol. 2},
  journal   = {LEOS 2000 : 2000 IEEE annual meeting conference proceedings; 13th annual meeting; IEEE Lasers and Electro-Optics Society 2000 annual meeting; 13-16 November 2000, The Westin Rio Mar Beach, Rio Grande, Puerto Rico. Vol. 2},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-5947-X},
  pages     = {444 -- 445},
  year      = {2000},
  language  = {en}
}
@article{FoersterLepsaFreundt2007,
  author    = {F{\"o}rster, Arnold and Lepsa, M. I. and Freundt, D.},
  title     = {Hot electron injector Gunn diode for advanced driver assistance systems},
  series = {Applied physics A: materials science and processing. 87 (2007), H. 3},
  journal   = {Applied physics A: materials science and processing. 87 (2007), H. 3},
  isbn      = {0947-8396},
  pages     = {545 -- 558},
  year      = {2007},
  language  = {en}
}
@article{FoersterDoehlerHeber1998,
  author    = {F{\"o}rster, Arnold and D{\"o}hler, G. H and Heber, J.},
  title     = {Hot electrons in n-i-p.i-based devices / G. H. D{\"o}hler ; J. Heber ... A. F{\"o}rster ...},
  series = {Hot electrons in semiconductors : physics and devices / ed. by N. Balkan. - (Series on semiconductor science and technology ; 5)},
  journal   = {Hot electrons in semiconductors : physics and devices / ed. by N. Balkan. - (Series on semiconductor science and technology ; 5)},
  publisher = {Clarendon Press},
  address   = {Oxford},
  isbn      = {0-19-850058-0},
  pages     = {478 -- 504},
  year      = {1998},
  language  = {en}
}
@inproceedings{RousseauKern2014,
  author    = {Rousseau, Alain and Kern, Alexander},
  title     = {How to deal with environmental risk in IEC 62305-2},
  series = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  booktitle = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  organization    = {International Conference on Lightning Protection <2014, Shanghai>},
  pages     = {521 -- 527},
  year      = {2014},
  abstract  = {The 2nd edition of the lightning risk management standard (IEC 62305-2) considers structures, which may endanger environment. In these cases, the loss is not limited to the structure itself, which is valid for usual structures. In the past (Edition 1) this danger was simply taken into account by a special hazard factor, multiplying the existing risk for the structure with a number. Now, in the edition 2, we add to the risk for the structure itself a "second risk" due to the losses outside the structure. The losses outside can be treated independently from what occurs inside. This is a major advantage to analyze the risk for sensitive structures, like chemical plants, nuclear plants, or structures containing explosives, etc. In this paper, the existing procedure given by the European version EN 62305-2 Ed.2 is further developed and applied to a few structures.},
  language  = {en}
}
@article{DotzauerPfeifferLaueretal.2019,
  author    = {Dotzauer, Martin and Pfeiffer, Diana and Lauer, Markus and Pohl, Marcel and Mauky, Eric and B{\"a}r, Katharina and Sonnleitner, Matthias and Z{\"o}rner, Wilfried and Hudde, Jessica and Schwarz, Bj{\"o}rn and Faßauer, Burkhardt and Dahmen, Markus and Rieke, Christian and Herbert, Johannes and Thr{\"a}n, Daniela},
  title     = {How to measure flexibility - Performance indicators for demand driven power generation from biogas plants},
  series = {Renewable Energy},
  journal   = {Renewable Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0960-1481},
  doi       = {10.1016/j.renene.2018.10.021},
  pages     = {135 -- 146},
  year      = {2019},
  language  = {en}
}
@inproceedings{MertensPuetzBrauneretal.2021,
  author    = {Mertens, Alexander and P{\"u}tz, Sebastian and Brauner, Philipp and Brillowski, Florian Sascha and Buczak, Nadine and Dammers, Hannah and van Dyck, Marc and Kong, Iris and K{\"o}nigs, Peter and Kortomeikel, Frauke Carole and Rodemann, Niklas and Schaar, Anne Kathrin and Steuer-Dankert, Linda and Wlecke, Shari and Gries, Thomas and Leicht-Scholten, Carmen and Nagel, Saskia K. and Piller, Frank Thomas and Schuh, G{\"u}nther and Ziefle, Martina and Nitsch, Verena},
  title     = {Human digital shadow: Data-based modeling of users and usage in the internet of production},
  series = {14th International Conference on Human System Interaction : 8-10 July 2021. Gdańsk, Poland},
  booktitle = {14th International Conference on Human System Interaction : 8-10 July 2021. Gdańsk, Poland},
  publisher = {IEEE},
  doi       = {10.1109/HSI52170.2021.9538729},
  pages     = {1 -- 8},
  year      = {2021},
  abstract  = {Digital Shadows as the aggregation, linkage and abstraction of data relating to physical objects are a central vision for the future of production. However, the majority of current research takes a technocentric approach, in which the human actors in production play a minor role. Here, the authors present an alternative anthropocentric perspective that highlights the potential and main challenges of extending the concept of Digital Shadows to humans. Following future research methodology, three prospections that illustrate use cases for Human Digital Shadows across organizational and hierarchical levels are developed: human-robot collaboration for manual work, decision support and work organization, as well as human resource management. Potentials and challenges are identified using separate SWOT analyses for the three prospections and common themes are emphasized in a concluding discussion.},
  language  = {en}
}
@incollection{BaierBraunerBrillowskietal.2023,
  author    = {Baier, Ralph and Brauner, Philipp and Brillowski, Florian and Dammers, Hannah and Liehner, Luca and P{\"u}tz, Sebastian and Schneider, Sebastian and Schollemann, Alexander and Steuer-Dankert, Linda and Vervier, Luisa and Gries, Thomas and Leicht-Scholten, Carmen and Mertens, Alexander and Nagel, Saskia K. and Schuh, G{\"u}nther and Ziefle, Martina and Nitsch, Verena},
  title     = {Human-centered work design for the internet of production},
  series = {Internet of production - fundamentals, applications and proceedings},
  booktitle = {Internet of production - fundamentals, applications and proceedings},
  editor    = {Brecher, Christian and Schuh, G{\"u}nther and van der Alst, Wil and Jarke, Matthias and Piller, Frank T. and Padberg, Melanie},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-98062-7},
  doi       = {10.1007/978-3-030-98062-7_19-1},
  pages     = {1 -- 23},
  year      = {2023},
  abstract  = {Like all preceding transformations of the manufacturing industry, the large-scale usage of production data will reshape the role of humans within the sociotechnical production ecosystem. To ensure that this transformation creates work systems in which employees are empowered, productive, healthy, and motivated, the transformation must be guided by principles of and research on human-centered work design. Specifically, measures must be taken at all levels of work design, ranging from (1) the work tasks to (2) the working conditions to (3) the organizational level and (4) the supra-organizational level. We present selected research across all four levels that showcase the opportunities and requirements that surface when striving for human-centered work design for the Internet of Production (IoP). (1) On the work task level, we illustrate the user-centered design of human-robot collaboration (HRC) and process planning in the composite industry as well as user-centered design factors for cognitive assistance systems. (2) On the working conditions level, we present a newly developed framework for the classification of HRC workplaces. (3) Moving to the organizational level, we show how corporate data can be used to facilitate best practice sharing in production networks, and we discuss the implications of the IoP for new leadership models. Finally, (4) on the supra-organizational level, we examine overarching ethical dimensions, investigating, e.g., how the new work contexts affect our understanding of responsibility and normative values such as autonomy and privacy. Overall, these interdisciplinary research perspectives highlight the importance and necessary scope of considering the human factor in the IoP.},
  language  = {en}
}
@article{FoersterLachenmannKastalskyetal.1998,
  author    = {F{\"o}rster, Arnold and Lachenmann, S. G. and Kastalsky, A. and Uhlisch, D.},
  title     = {Hybrid superconductor/semiconductor step junction with three terminals. Lachenmann, S. G.; Kastalsky, A.; F{\"o}rster A.; Uhlisch, D.; Neurohr, K.; Sch{\"a}pers, Th.},
  series = {Journal of Applied Physics. 83 (1998), H. 12},
  journal   = {Journal of Applied Physics. 83 (1998), H. 12},
  isbn      = {1089-7550},
  pages     = {8077 -- 8079},
  year      = {1998},
  language  = {en}
}
@article{FoersterBruggerMeinersetal.1994,
  author    = {F{\"o}rster, Arnold and Brugger, H. and Meiners, U. and Diniz, R.},
  title     = {Hydrostatic pressure sensors based on solid state tunneling devices / H. Brugger; U. Meiners ; R. Diniz ... A. F{\"o}rster ...},
  series = {Solid state electronics. 37 (1994), H. 4-6},
  journal   = {Solid state electronics. 37 (1994), H. 4-6},
  isbn      = {0038-1101},
  pages     = {801 -- 804},
  year      = {1994},
  language  = {en}
}
@article{FoersterSchmidtHaug1996,
  author    = {F{\"o}rster, Arnold and Schmidt, T. and Haug, R. J.},
  title     = {Imaging the local density of states in a disordered semiconductor / T. Schmidt ; R. J. Haug ; V. I. Fal'ko ... A. F{\"o}rster ...},
  series = {23rd International Conference on the Physics of Semiconductors : Berlin, Germany, July 21 - 26, 1996 / ed.: Matthias Scheffler ... - Vol. 3},
  journal   = {23rd International Conference on the Physics of Semiconductors : Berlin, Germany, July 21 - 26, 1996 / ed.: Matthias Scheffler ... - Vol. 3},
  publisher = {World Scientific},
  address   = {Singapore [u.a.]},
  isbn      = {981-02-2947-X},
  pages     = {2251 -- ff.},
  year      = {1996},
  language  = {en}
}
@inproceedings{SchwagerAngeleNourietal.2022,
  author    = {Schwager, Christian and Angele, Florian and Nouri, Bijan and Schwarzb{\"o}zl, Peter and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Impact of DNI forecast quality on performance prediction for a commercial scale solar tower: Application of nowcasting DNI maps to dynamic solar tower simulation},
  series = {SolarPACES conference proceedings},
  booktitle = {SolarPACES conference proceedings},
  number    = {Vol. 1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.675},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {Concerning current efforts to improve operational efficiency and to lower overall costs of concentrating solar power (CSP) plants with prediction-based algorithms, this study investigates the quality and uncertainty of nowcasting data regarding the implications for process predictions. DNI (direct normal irradiation) maps from an all-sky imager-based nowcasting system are applied to a dynamic prediction model coupled with ray tracing. The results underline the need for high-resolution DNI maps in order to predict net yield and receiver outlet temperature realistically. Furthermore, based on a statistical uncertainty analysis, a correlation is developed, which allows for predicting the uncertainty of the net power prediction based on the corresponding DNI forecast uncertainty. However, the study reveals significant prediction errors and the demand for further improvement in the accuracy at which local shadings are forecasted.},
  language  = {en}
}
@article{ButenwegKleemannIkier2013,
  author    = {Butenweg, Christoph and Kleemann, Anne and Ikier, Axel},
  title     = {Impact-Belastungen von Stahlbetonkonstruktionen},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {Band 88},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  publisher = {VDI Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {S7 -- S14},
  year      = {2013},
  language  = {de}
}
@inproceedings{HellmannsBoehmDilger2006,
  author    = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus},
  title     = {Implementation of a velocity controlled manual applicator for adhesives and sealants in the automotive industry in consideration of quality control},
  series = {Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida},
  booktitle = {Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida},
  publisher = {Adhesion Society},
  address   = {Blacksburg, Va.},
  organization    = {Adhesion Society},
  issn      = {1086-9506},
  pages     = {68 -- 70},
  year      = {2006},
  language  = {en}
}
@incollection{vondenDrieschSteuerDankertBergetal.2020,
  author    = {von den Driesch, Elena and Steuer-Dankert, Linda and Berg, Tobias and Leicht-Scholten, Carmen},
  title     = {Implementation of gender and diversity perspectives in transport development plans in germany},
  series = {Engendering cities: designing sustainable urban spaces for all},
  booktitle = {Engendering cities: designing sustainable urban spaces for all},
  publisher = {Routledge},
  address   = {London},
  isbn      = {978-1-351-20090-5},
  pages     = {90 -- 109},
  year      = {2020},
  abstract  = {As mobility should ensure the accessibility to and participation in society, transport planning has to deal with a variety of gender and diversity categories affecting users' mobility needs and patterns. Exemplified by an analysis of an instrument of transport development processes - German Transport Development Plans (TDPs) - we investigated to what extent diverse target groups and their mobility requirements are implemented in transport strategy papers. Research results illustrate a still-prevalent neglect of several relevant gender and diversity categories while prioritizing and focusing on eco-friendly topics. But how sustainable can transport be without facing the diversification of life circumstances?},
  language  = {en}
}
@article{MakovickaGaertnerHardtetal.1997,
  author    = {Makovicka, C. and G{\"a}rtner, G. and Hardt, Arno and Hermann, W. and Wiechert, D. U.},
  title     = {Impregnated cathode surface investigations by SFM/STM and SEM/EDX},
  series = {Applied surface science. Vol. 111},
  journal   = {Applied surface science. Vol. 111},
  issn      = {1873-5584 (E-Journal); 0169-4332 (Print)},
  pages     = {70 -- 75},
  year      = {1997},
  language  = {en}
}
@article{MistlerAnthoineButenweg2007,
  author    = {Mistler, Michael and Anthoine, A. and Butenweg, Christoph},
  title     = {In-plane and out-of-plane homogenisation of masonry},
  series = {Computers \& structures},
  volume    = {Volume 85},
  journal   = {Computers \& structures},
  number    = {Issues 17-18},
  issn      = {1879-2243 (E-Journal); 0045-7949 (Print)},
  doi       = {10.1016/j.compstruc.2006.08.087},
  pages     = {1321 -- 1330},
  year      = {2007},
  language  = {en}
}
@article{SchwarzerWollscheid1994,
  author    = {Schwarzer, Klemens and Wollscheid, Georg},
  title     = {In-situ Vermessung und Bewertung von solarthermischen Großanlagen (VELS II) / G. Wollscheid ; K. Schwarzer},
  series = {Viertes Symposium Thermische Solarenergie : [09. - 10. Juni 1994, Bildungszentrum der Hanns-Seidel-Stiftung, Kloster Banz] / [Veranst.: OTTI-Technologie-Kolleg. Wiss. Gesamtltg.: Adolf Goetzberger]},
  journal   = {Viertes Symposium Thermische Solarenergie : [09. - 10. Juni 1994, Bildungszentrum der Hanns-Seidel-Stiftung, Kloster Banz] / [Veranst.: OTTI-Technologie-Kolleg. Wiss. Gesamtltg.: Adolf Goetzberger]},
  publisher = {Ostbayr. Technologie-Transfer-Inst.},
  address   = {Regensburg},
  pages     = {219 -- 224},
  year      = {1994},
  language  = {de}
}
@inproceedings{GoemmelFrauenrathOttenetal.2010,
  author    = {G{\"o}mmel, Andreas and Frauenrath, Tobias and Otten, Mario and Niendorf, Thoralf and Butenweg, Christoph},
  title     = {In-vivo measurements of vocal fold geometry using Magnetic Resonance Imaging},
  series = {Fortschritte der Akustik - DAGA 2010 36. Jahrestagung f{\"u}r Akustik, 15. bis 18. M{\"a}rz 2010 in Berlin},
  booktitle = {Fortschritte der Akustik - DAGA 2010 36. Jahrestagung f{\"u}r Akustik, 15. bis 18. M{\"a}rz 2010 in Berlin},
  editor    = {M{\"o}ser, Michael and Schulte-Fortkamp, Brgitte and Ochmann, Martin},
  publisher = {Deutsche Gesellschaft f{\"u}r Akustik},
  address   = {Berlin},
  isbn      = {978-3-9808659-8-2},
  year      = {2010},
  language  = {de}
}
@article{HenriquesJuradoGrieseretal.2020,
  author    = {Henriques, A. and Jurado, B. and Grieser, M. and Denis-Petit, D. and Chiron, T. and Gaudefroy, L. and Glorius, J. and Langer, Christoph and Litvinov, Yu. A. and Mathieu, L. and Meot, V. and Perez-Sanchez, R. and Pibernat, J. and Reifarth, R. and Roig, O. and Thomas, B. and Thomas, B. A. and Thomas, J. C. and Tsekhanovich, I.},
  title     = {Indirect measurements of neutron cross-secti at heavy-ion storage rings},
  series = {Journal of Physics: Conference Series},
  volume    = {1668},
  journal   = {Journal of Physics: Conference Series},
  number    = {Art. 012019},
  publisher = {IOP},
  address   = {Bristol},
  doi       = {10.1088/1742-6596/1668/1/012019},
  year      = {2020},
  abstract  = {Cross sections for neutron-induced reactions of short-lived nuclei are essential for nuclear astrophysics since these reactions in the stars are responsible for the production of most heavy elements in the universe. These reactions are also key in applied domains like energy production and medicine. Nevertheless, neutron-induced cross-section measurements can be extremely challenging or even impossible to perform due to the radioactivity of the targets involved. Indirect measurements through the surrogate-reaction method can help to overcome these difficulties. The surrogate-reaction method relies on the use of an alternative reaction that will lead to the formation of the same excited nucleus as in the neutron-induced reaction of interest. The decay probabilities (for fission, neutron and gamma-ray emission) of the nucleus produced via the surrogate reaction allow one to constrain models and the prediction of the desired neutron cross sections. We propose to perform surrogate reaction measurements in inverse kinematics at heavy-ion storage rings, in particular at the CRYRING@ESR of the GSI/FAIR facility. We present the conceptual idea of the most promising setup to measure for the first time simultaneously the fission, neutron and gamma-ray emission probabilities. The results of the first simulations considering the 238U(d,d') reaction are shown, as well as new technical developments that are being carried out towards this set-up.},
  language  = {en}
}
@article{KernHeidlerZischank1998,
  author    = {Kern, Alexander and Heidler, F. and Zischank, W.},
  title     = {Induced overvoltages in cable ducts taking into account the current flow into earth / F. Heidler ; W. Zischank ... A. Kern ...},
  series = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  journal   = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  address   = {Birmingham},
  year      = {1998},
  language  = {en}
}
@book{BreitbachBeckmoellerPenkalla1994,
  author    = {Breitbach, Gerd and Beckm{\"o}ller, S. and Penkalla, H. J.},
  title     = {Inelastische Analyse des Verformungsverhaltens einer innengek{\"u}hlten Gasturbinenschaufel aus dem Werkstoff IN 738 LC unter Verwendung des strukturabh{\"a}ngigen Werkstoffmodells / S. Beckm{\"o}ller ; H. J. Penkalla ; G. Breitbach ...},
  publisher = {Forschungszentrum J{\"u}lich, Zentralbibliothek},
  address   = {J{\"u}lich},
  pages     = {I, 102 S. : Ill., graph. Darst.},
  year      = {1994},
  language  = {de}
}
@inproceedings{ŠakićMilijašMarinkovićetal.2021,
  author    = {Šakić, Bogdan and Milijaš, Aleksa and Marinković, Marko and Butenweg, Christoph and Klinkel, Sven},
  title     = {Influence of prior in-plane damage on the out-of-plane response of non-load bearing unreinforced masonry walls under seismic load},
  series = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  booktitle = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  editor    = {Papadrakakis, Manolis and Fragiadakis, Michalis},
  publisher = {National Technical University of Athens},
  address   = {Athen},
  isbn      = {9786188507258},
  issn      = {2623-3347},
  doi       = {10.7712/120121.8527.18913},
  pages     = {808 -- 828},
  year      = {2021},
  abstract  = {Reinforced concrete frames with masonry infill walls are popular form of construction all over the world as well in seismic regions. While severe earthquakes can cause high level of damage of both reinforced concrete and masonry infills, earthquakes of lower to medium intensity some-times can cause significant level of damage of masonry infill walls. Especially important is the level of damage of face loaded infill masonry walls (out-of-plane direction) as out-of-plane load cannot only bring high level of damage to the wall, it can also be life-threating for the people near the wall. The response in out-of-plane direction directly depends on the prior in-plane damage, as previous investigation shown that it decreases resistance capacity of the in-fills. Behaviour of infill masonry walls with and without prior in-plane load is investigated in the experimental campaign and the results are presented in this paper. These results are later compared with analytical approaches for the out-of-plane resistance from the literature. Conclusions based on the experimental campaign on the influence of prior in-plane damage on the out-of-plane response of infill walls are compared with the conclusions from other authors who investigated the same problematic.},
  language  = {en}
}
@article{ŠakićMarinkovićButenwegetal.2023,
  author    = {Šakić, Bogdan and Marinković, Marko and Butenweg, Christoph and Klinkel, Sven},
  title     = {Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls},
  series = {Engineering Structures},
  volume    = {276},
  journal   = {Engineering Structures},
  editor    = {Yang, J.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2022.115342},
  year      = {2023},
  abstract  = {Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural elements. Therefore, their behaviour under earthquake loading in out-of-plane (OOP) direction is investigated by several researches in the past years. However, none of the existing experimental campaigns or analytical approaches consider the influence of prior slab deflection on OOP response of partition walls. Moreover, none of the existing construction techniques for the connection of partition walls with surrounding reinforced concrete (RC) is investigated for the combined slab deflection and OOP loading. However, the inevitable time-dependent behaviour of RC slabs leads to high values of final slab deflections which can further influence boundary conditions of partition walls. Therefore, a comprehensive study on the influence of slab deflection on the OOP capacity of masonry partitions is conducted. In the first step, experimental tests are carried out. Results of experimental tests are further used for the calibration of the numerical model employed for a parametric study. Based on the results, behaviour under combined loading for different construction techniques is explained. The results show that slab deflection leads either to severe damage or to a high reduction of OOP capacity. Existing practical solutions do not account for these effects. In this contribution, recommendations to overcome the problems of combined slab deflection and OOP loading on masonry partition walls are given. Possible interaction of in-plane (IP) loading, with the combined slab deflection and OOP loading on partition walls, is not investigated in this study.},
  language  = {en}
}
@article{BruessermannBonnenbergSoehngen1985,
  author    = {Br{\"u}ssermann, Klaus and Bonnenberg, H. and S{\"o}hngen, K.},
  title     = {Ingenieurberatung zur Erf{\"u}llung umweltrechtlicher Vorschriften / Bonnenberg, H.; Br{\"u}ssermann, K.; S{\"o}hngen, K.},
  series = {Erfahrungen mit Techniken der st{\"a}dtischen Energieversorgung : Tagung Stuttgart, 25. u. 26. Sept. 1985 / VDI-Gesellschaft Energietechnik},
  journal   = {Erfahrungen mit Techniken der st{\"a}dtischen Energieversorgung : Tagung Stuttgart, 25. u. 26. Sept. 1985 / VDI-Gesellschaft Energietechnik},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-090573-5},
  pages     = {271 -- 285},
  year      = {1985},
  language  = {de}
}