@article{ButenwegBursiPaolaccietal.2021,
  author    = {Butenweg, Christoph and Bursi, Oreste S. and Paolacci, Fabrizio and Marinković, Marko and Lanese, Igor and Nardin, Chiara and Quinci, Gianluca},
  title     = {Seismic performance of an industrial multi-storey frame structure with process equipment subjected to shake table testing},
  series = {Engineering Structures},
  volume    = {243},
  journal   = {Engineering Structures},
  number    = {15},
  editor    = {Yang, J.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2021.112681},
  year      = {2021},
  abstract  = {Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of process equipment and multiple and simultaneous release of hazardous substances. Nonetheless, current standards for seismic design of industrial facilities are considered inadequate to guarantee proper safety conditions against exceptional events entailing loss of containment and related consequences. On these premises, the SPIF project -Seismic Performance of Multi-Component Systems in Special Risk Industrial Facilities- was proposed within the framework of the European H2020 SERA funding scheme. In detail, the objective of the SPIF project is the investigation of the seismic behaviour of a representative industrial multi-storey frame structure equipped with complex process components by means of shaking table tests. Along this main vein and in a performance-based design perspective, the issues investigated in depth are the interaction between a primary moment resisting frame (MRF) steel structure and secondary process components that influence the performance of the whole system; and a proper check of floor spectra predictions. The evaluation of experimental data clearly shows a favourable performance of the MRF structure, some weaknesses of local details due to the interaction between floor crossbeams and process components and, finally, the overconservatism of current design standards w.r.t. floor spectra predictions.},
  language  = {en}
}
@inproceedings{ButenwegMarinkovićPaveseetal.2021,
  author    = {Butenweg, Christoph and Marinković, Marko and Pavese, Alberto and Lanese, Igor and Hoffmeister, Benno and Pinkawa, Marius and Vulcu, Mihai-Cristian and Bursi, Oreste and Nardin, Chiara and Paolacci, Fabrizio and Quinci, Gianluca and Fragiadakis, Michalis and Weber, Felix and Huber, Peter and Renault, Philippe and G{\"u}ndel, Max and Dyke, Shirley and Ciucci, M. and Marino, A.},
  title     = {Seismic performance of multi-component systems in special risk industrial facilities},
  series = {Proceedings of the seventeenth world conference on earthquake engineering},
  booktitle = {Proceedings of the seventeenth world conference on earthquake engineering},
  year      = {2021},
  abstract  = {Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous substances in industrial facilities. Nevertheless, the design of industrial plants is inadequately described in recent codes and guidelines, as they do not consider the dynamic interaction between the structure and the installations and thus the effect of seismic response of the installations on the response of the structure and vice versa. The current code-based approach for the seismic design of industrial facilities is considered not enough for ensure proper safety conditions against exceptional event entailing loss of content and related consequences. Accordingly, SPIF project (Seismic Performance of Multi- Component Systems in Special Risk Industrial Facilities) was proposed within the framework of the European H2020 - SERA funding scheme (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe). The objective of the SPIF project is the investigation of the seismic behavior of a representative industrial structure equipped with complex process technology by means of shaking table tests. The test structure is a three-story moment resisting steel frame with vertical and horizontal vessels and cabinets, arranged on the three levels and connected by pipes. The dynamic behavior of the test structure and installations is investigated with and without base isolation. Furthermore, both firmly anchored and isolated components are taken into account to compare their dynamic behavior and interactions with each other. Artificial and synthetic ground motions are applied to study the seismic response at different PGA levels. After each test, dynamic identification measurements are carried out to characterize the system condition. The contribution presents the numerical simulations to calibrate the tests on the prototype, the experimental setup of the investigated structure and installations, selected measurement data and finally describes preliminary experimental results.},
  language  = {en}
}
@inproceedings{ButenwegMistler2006,
  author    = {Butenweg, Christoph and Mistler, Michael},
  title     = {Seismic resistance of unreinforced masonry buildings},
  series = {Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...},
  booktitle = {Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Computational Structures Technology <8, 2006, Las Palmas>},
  isbn      = {1-905088-06-X},
  doi       = {10.4203/ccp.83.9},
  pages     = {Paper 9},
  year      = {2006},
  language  = {en}
}
@article{MykoniouButenwegHoltschoppenetal.2016,
  author    = {Mykoniou, Konstantin and Butenweg, Christoph and Holtschoppen, Britta and Klinkel, Sven},
  title     = {Seismic response analysis of adjacent liquid-storage tanks},
  series = {Earthquake engineering and structural dynamics},
  volume    = {45},
  journal   = {Earthquake engineering and structural dynamics},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1096-9845 (E-Journal); 0098-8847 (Print)},
  doi       = {10.1002/eqe.2726},
  pages     = {1779 -- 1796},
  year      = {2016},
  abstract  = {A refined substructure technique in the frequency domain is developed, which permits consideration of the interaction effects among adjacent containers through the supporting deformable soil medium. The tank-liquid systems are represented by means of mechanical models, whereas discrete springs and dashpots stand for the soil beneath the foundations. The proposed model is employed to assess the responses of adjacent circular, cylindrical tanks for harmonic and seismic excitations over wide range of tank proportions and soil conditions. The influence of the number, spatial arrangement of the containers and their distance on the overall system's behavior is addressed. The results indicate that the cross-interaction effects can substantially alter the impulsive components of response of each individual element in a tank farm. The degree of this impact is primarily controlled by the tank proportions and the proximity of the predominant natural frequencies of the shell-liquid-soil systems and the input seismic motion. The group effects should be not a priori disregarded, unless the tanks are founded on shallow soil deposit overlying very stiff material or bedrock.},
  language  = {en}
}
@inproceedings{CacciatoreButenweg2020,
  author    = {Cacciatore, Pamela and Butenweg, Christoph},
  title     = {Seismic safety of cylindrical granular material steel silos under seismic loading},
  series = {Seismic design of industrial facilities 2020},
  booktitle = {Seismic design of industrial facilities 2020},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-729-0},
  pages     = {231 -- 244},
  year      = {2020},
  language  = {en}
}
@inproceedings{GellertParkButenweg2010,
  author    = {Gellert, Christoph and Park, Jin and Butenweg, Christoph},
  title     = {Seismic safety verification of masonry structures},
  series = {Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universit{\"a}t Dresden]. Ed. by: Wolfram J{\"a}ger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)},
  booktitle = {Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universit{\"a}t Dresden]. Ed. by: Wolfram J{\"a}ger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)},
  publisher = {ARGE 8IMC Dresden},
  address   = {Radebeul},
  organization    = {International Masonry Conference <8, 2010, Dresden>},
  isbn      = {978-3-00-031381-3},
  pages     = {813 -- 822},
  year      = {2010},
  language  = {en}
}
@inproceedings{TomićPennaDeJongetal.2020,
  author    = {Tomić, Igor and Penna, Andrea and DeJong, Matthew and Butenweg, Christoph and Correia, Ant{\´o}nio A. and Candeias, Paulo X. and Senaldi, Ilaria and Guerrini, Gabriele and Malomo, Daniele and Beyer, Katrin},
  title     = {Seismic testing of adjacent interacting masonry structures},
  series = {12th International Conference on Structural Analysis of Historical Constructions (SAHC 2020)},
  booktitle = {12th International Conference on Structural Analysis of Historical Constructions (SAHC 2020)},
  doi       = {10.23967/sahc.2021.234},
  pages     = {1 -- 12},
  year      = {2020},
  abstract  = {In many historical centres in Europe, stone masonry buildings are part of building aggregates, which developed when the layout of the city or village was densified. In these aggregates, adjacent buildings share structural walls to support floors and roofs. Meanwhile, the masonry walls of the fa{\c{c}}ades of adjacent buildings are often connected by dry joints since adjacent buildings were constructed at different times. Observations after for example the recent Central Italy earthquakes showed that the dry joints between the building units were often the first elements to be damaged. As a result, the joints opened up leading to pounding between the building units and a complicated interaction at floor and roof beam supports. The analysis of such building aggregates is very challenging and modelling guidelines do not exist. Advances in the development of analysis methods have been impeded by the lack of experimental data on the seismic response of such aggregates. The objective of the project AIMS (Seismic Testing of Adjacent Interacting Masonry Structures), included in the H2020 project SERA, is to provide such experimental data by testing an aggregate of two buildings under two horizontal components of dynamic excitation. The test unit is built at half-scale, with a two-storey building and a one-storey building. The buildings share one common wall while the fa{\c{c}}ade walls are connected by dry joints. The floors are at different heights leading to a complex dynamic response of this smallest possible building aggregate. The shake table test is conducted at the LNEC seismic testing facility. The testing sequence comprises four levels of shaking: 25\%, 50\%, 75\% and 100\% of nominal shaking table capacity. Extensive instrumentation, including accelerometers, displacement transducers and optical measurement systems, provides detailed information on the building aggregate response. Special attention is paid to the interface opening, the globa},
  language  = {en}
}
@inproceedings{ChurilovDumovaJovanoskaButenweg2013,
  author    = {Churilov, Sergej and Dumova-Jovanoska, Elena and Butenweg, Christoph},
  title     = {Seismic verification of existing masonry buildings and strengthening with reinforced concrete jackets},
  series = {Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)},
  booktitle = {Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)},
  editor    = {Adam, Christoph and Heuer, Rudolf and Lenhardt, Wolfgang and Schranz, Christian},
  isbn      = {978-3-902749-04-8},
  year      = {2013},
  abstract  = {A methodology for assessment, seismic verification and strengthening of existing masonry buildings is presented in this paper. The verification is performed using a calculation model calibrated with the results from ambient vibration measurements. The calibrated model serves as an input for a deformation-based verification procedure based on the Capacity Spectrum Method (CSM). The bearing capacity of the building is calculated from experimental capacity curves of the individual walls idealized with bilinear elastic-perfectly plastic curves. The experimental capacity curves were obtained from in-plane cyclic loading tests on unreinforced and strengthened masonry walls with reinforced concrete jackets. The seismic action is compared with the load-bearing capacity of the building considering non-linear material behavior with its post-peak capacity. The application of the CSM to masonry buildings and the influence of a traditional strengthening method are demonstrated on the example of a public school building in Skopje, Macedonia.},
  language  = {en}
}
@inproceedings{KuhlmannButenwegLopezetal.2004,
  author    = {Kuhlmann, Wolfram and Butenweg, Christoph and Lopez, Marijen and Fernandez, Sebastian},
  title     = {Seismic vulnerability assessment of the historic Aachen Cathedral},
  series = {Conference proceedings / 13th World Conference on Earthquake Engineering [Vancouver, British Columbia, Canada, August 1 - 6, 2004] / [hosted by CAEE/ACGP, Canadian Association for Earthquake Engineering]},
  booktitle = {Conference proceedings / 13th World Conference on Earthquake Engineering [Vancouver, British Columbia, Canada, August 1 - 6, 2004] / [hosted by CAEE/ACGP, Canadian Association for Earthquake Engineering]},
  publisher = {CAEE},
  address   = {Vancouver},
  organization    = {World Conference on Earthquake Engineering <13, 2004, Vancouver>},
  pages     = {1 -- 14},
  year      = {2004},
  language  = {en}
}
@inproceedings{RenaultButenwegMistler2005,
  author    = {Renault, Philippe and Butenweg, Christoph and Mistler, Michael},
  title     = {Seismic vulnerability assessment system for bridges},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  pages     = {1 -- 14},
  year      = {2005},
  language  = {en}
}
@article{GivanoudiCornelisRasschaertetal.2021,
  author    = {Givanoudi, Stella and Cornelis, Peter and Rasschaert, Geertrui and Wackers, Gideon and Iken, Heiko and Rolka, David and Yongabi, Derick and Robbens, Johan and Sch{\"o}ning, Michael Josef and Heyndrickx, Marc and Wagner, Patrick},
  title     = {Selective Campylobacter detection and quantification in poultry: A sensor tool for detecting the cause of a common zoonosis at its source},
  series = {Sensors and Actuators B: Chemical},
  journal   = {Sensors and Actuators B: Chemical},
  number    = {In Press, Journal Pre-proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2021.129484},
  pages     = {Article 129484},
  year      = {2021},
  language  = {en}
}
@article{KotterLintzTurek1992,
  author    = {Kotter, Michael and Lintz, Hans-G{\"u}nther and Turek, Thomas},
  title     = {Selective catalytic reduction of nitrogen oxide by use of the Ljungstroem air heater as reactor : a case study},
  series = {Chemical engineering science . 47 (1992), H. 9-11},
  journal   = {Chemical engineering science . 47 (1992), H. 9-11},
  isbn      = {0009-2509},
  pages     = {2763 -- 2768},
  year      = {1992},
  language  = {en}
}
@article{HoetterFateriGebhardt2012,
  author    = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Selective laser melting of metals: desktop machines open up new chances even for small companies},
  series = {Advanced materials research},
  volume    = {622-623},
  journal   = {Advanced materials research},
  publisher = {Trans Tech Publ.},
  address   = {Baech},
  issn      = {1662-8985 (E-Journal); 1022-6680 (Print)},
  doi       = {10.4028/www.scientific.net/AMR.622-623.461},
  pages     = {461 -- 465},
  year      = {2012},
  abstract  = {Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.},
  language  = {en}
}
@article{FateriGebhardt2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Selective Laser Melting of Soda-Lime Glass Powder},
  series = {International Journal of Applied Ceramic Technology},
  volume    = {12},
  journal   = {International Journal of Applied Ceramic Technology},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1744-7402},
  doi       = {10.1111/ijac.12338},
  pages     = {53 -- 61},
  year      = {2015},
  language  = {en}
}
@article{RieperGebhardtStucker2016,
  author    = {Rieper, Harald and Gebhardt, Andreas and Stucker, Brent},
  title     = {Selective Laser Melting of the Eutectic Silver-Copper Alloy Ag 28 wt \% Cu},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {13},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/nbn:de:0009-2-44141},
  year      = {2016},
  abstract  = {The aim of this work was to perform a detailed investigation of the use of Selective Laser Melting (SLM) technology to process eutectic silver-copper alloy Ag 28 wt. \% Cu (also called AgCu28). The processing occurred with a Realizer SLM 50 desktop machine. The powder analysis (SEM-topography, EDX, particle distribution) was reported as well as the absorption rates for the near-infrared (NIR) spectrum. Microscope imaging showed the surface topography of the manufactured parts. Furthermore, microsections were conducted for the analysis of porosity. The Design of Experiments approach used the response surface method in order to model the statistical relationship between laser power, spot distance and pulse time.},
  language  = {en}
}
@article{MuellerVeggianHaenniBeuscheretal.1980,
  author    = {M{\"u}ller-Veggian, Mattea and Haenni, D. R. and Beuscher, H. and Bochev, B.},
  title     = {Selectivity of a sum spectrometer for (a,xn) reaction},
  series = {Annual report 1979 / Kernforschungsanlage J{\"u}lich Institut f{\"u}r Kernphysik / Hrsg.: A. F{\"a}ssler. - (Spezielle Berichte der Kernforschungsanlage J{\"u}lich ; 72)},
  journal   = {Annual report 1979 / Kernforschungsanlage J{\"u}lich Institut f{\"u}r Kernphysik / Hrsg.: A. F{\"a}ssler. - (Spezielle Berichte der Kernforschungsanlage J{\"u}lich ; 72)},
  publisher = {Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {49},
  year      = {1980},
  language  = {en}
}
@article{PrielmeierLuedemann1986,
  author    = {Prielmeier, Franz and L{\"u}demann, H.-D.},
  title     = {Self diffusion in compressed liquid chloromethane, dichloromethane and trichloromethane / F. X. Prielmeier; H.-D. L{\"u}demann},
  series = {Molecular Physics. 58 (1986), H. 3},
  journal   = {Molecular Physics. 58 (1986), H. 3},
  isbn      = {0026-8976},
  pages     = {593 -- 604},
  year      = {1986},
  language  = {en}
}
@inproceedings{GanegedaraAlahakoonMashfordetal.2012,
  author    = {Ganegedara, H. and Alahakoon, D. and Mashford, J. and Paplinski, A. and M{\"u}ller, Karsten and Deserno, T. M.},
  title     = {Self organising map based region of interest labelling for automated defect identification in large sewer pipe image collections},
  series = {The 2012 International Joint Conference on Neural Networks (IJCNN) : 10 - 15 June 2012, Brisbane, Australia ; [part of the] 2012 IEEE World Congress on Computational Intelligence (IEEE-WCCI 2012)},
  booktitle = {The 2012 International Joint Conference on Neural Networks (IJCNN) : 10 - 15 June 2012, Brisbane, Australia ; [part of the] 2012 IEEE World Congress on Computational Intelligence (IEEE-WCCI 2012)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {IEEE Computational Intelligence Society (IEEE-CIS)},
  isbn      = {978-1-4673-1490-9},
  pages     = {8 S.},
  year      = {2012},
  language  = {en}
}
@article{Stulpe2009,
  author    = {Stulpe, Werner},
  title     = {Self-Adjoint Operator},
  series = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  journal   = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70622-9},
  pages     = {692 -- 697},
  year      = {2009},
  language  = {en}
}
@inproceedings{BungSchlenkhoffOertel2009,
  author    = {Bung, Daniel Bernhard and Schlenkhoff, Andreas and Oertel, M.},
  title     = {Self-aerated skimming flow on embankment stepped spillways},
  series = {Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada},
  booktitle = {Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {9789078046080},
  pages     = {1 CD-ROM},
  year      = {2009},
  language  = {en}
}
@inproceedings{BungSchlenkhoff2010,
  author    = {Bung, Daniel Bernhard and Schlenkhoff, Andreas},
  title     = {Self-aerated skimming flow on embankment stepped spillways : the effect of additional micro-roughness on energy dissipation and oxygen transfer},
  series = {Proceedings from first IAHR European congress : May 2010, Edinburgh},
  booktitle = {Proceedings from first IAHR European congress : May 2010, Edinburgh},
  publisher = {Heriot-Watt University, School of the Built Environment},
  address   = {Edinburgh},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {9780956595102},
  pages     = {Artikelkennnummer HSIIId},
  year      = {2010},
  language  = {en}
}
@article{SpelthahnPoghossianSchoening2009,
  author    = {Spelthahn, Heiko and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Self-aligned nanogaps and nanochannels via conventional photolithography and pattern-size reduction technique},
  series = {Electrochimica Acta. 54 (2009), H. 25 Sp. Iss. SI},
  journal   = {Electrochimica Acta. 54 (2009), H. 25 Sp. Iss. SI},
  isbn      = {0013-4686},
  pages     = {6010 -- 6014},
  year      = {2009},
  language  = {en}
}
@inproceedings{FerreinPotgieterSteinbauer2009,
  author    = {Ferrein, Alexander and Potgieter, Anet and Steinbauer, Gerald},
  title     = {Self-aware robots - What do we need from learning, deliberation, and reactive control?},
  series = {HYCAS 2009 : International Workshop on Hybrid Control of Autonomous Systems : Integrating Learning, Deliberation and Reactive Control : Pasadena, Calif., 13 July 2009},
  booktitle = {HYCAS 2009 : International Workshop on Hybrid Control of Autonomous Systems : Integrating Learning, Deliberation and Reactive Control : Pasadena, Calif., 13 July 2009},
  publisher = {AAAI Pr.},
  pages     = {1 -- 5},
  year      = {2009},
  language  = {en}
}
@article{deBloisdeZangerPaulssenetal.2018,
  author    = {de Blois, Eric and de Zanger, Rory M. S. and Paulßen, Elisabeth and Sze Chan, Ho and Breeman, Wouter A. P.},
  title     = {Semi-automated system for concentrating 68Ga-eluate to obtain high molar and volume concentration of 68Ga-Radiopharmaca for preclinical applications},
  series = {Nuclear Medicine and Biology},
  volume    = {64-65},
  journal   = {Nuclear Medicine and Biology},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.nucmedbio.2018.06.006},
  pages     = {16 -- 21},
  year      = {2018},
  abstract  = {68Ga-radiopharmaceuticals are common in the field of Nuclear Medicine to visualize receptor-mediated processes. In contrast to straightforward labeling procedures for clinical applications, preclinical in vitro and in vivo applications are hampered for reasons like e.g. volume restriction, activity concentration, molar activity and osmolality. Therefore, we developed a semiautomatic system specifically to overcome these problems. A difficulty appeared unexpectedly, as intrinsic trace metals derived from eluate (Zn, Fe and Cu) are concentrated as well in amounts that influence radiochemical yield and thus lower molar activity.},
  language  = {en}
}
@article{PawelkeButzer1968,
  author    = {Pawelke, Siegfried and Butzer, Paul L.},
  title     = {Semi-groups and resolvent operators},
  series = {Archive for Rational Mechanics and Analysis},
  volume    = {30},
  journal   = {Archive for Rational Mechanics and Analysis},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0003-9527},
  doi       = {10.1007/BF00250941},
  pages     = {127 -- 147},
  year      = {1968},
  language  = {en}
}
@article{FoersterKordosBetko1995,
  author    = {F{\"o}rster, Arnold and Kordos, P. and Betko, J.},
  title     = {Semi-insulating GaAs layers grown by molecular-beam epitaxy / P. Kordos ; A. F{\"o}rster ; J. Betko ...},
  series = {Applied physics letters. 67 (1995), H. 7},
  journal   = {Applied physics letters. 67 (1995), H. 7},
  isbn      = {0003-6951},
  pages     = {983 -- 985},
  year      = {1995},
  language  = {en}
}
@article{Dikta2017,
  author    = {Dikta, Gerhard},
  title     = {Semi-parametric random censorship models},
  series = {From Statistics to Mathematical Finance : Festschrift in Honour of Winfried Stute},
  journal   = {From Statistics to Mathematical Finance : Festschrift in Honour of Winfried Stute},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-319-50986-0},
  doi       = {10.1007/978-3-319-50986-0_3},
  pages     = {43 -- 56},
  year      = {2017},
  language  = {en}
}
@article{DiktaReisselHarlass2016,
  author    = {Dikta, Gerhard and Reißel, Martin and Harlaß, Carsten},
  title     = {Semi-parametric survival function estimators deduced from an identifying Volterra type integral equation},
  series = {Journal of multivariate analysis},
  journal   = {Journal of multivariate analysis},
  number    = {147},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.jmva.2016.02.008},
  pages     = {273 -- 284},
  year      = {2016},
  abstract  = {Based on an identifying Volterra type integral equation for randomly right censored observations from a lifetime distribution function F, we solve the corresponding estimating equation by an explicit and implicit Euler scheme. While the first approach results in some known estimators, the second one produces new semi-parametric and pre-smoothed Kaplan-Meier estimators which are real distribution functions rather than sub-distribution functions as the former ones are. This property of the new estimators is particular useful if one wants to estimate the expected lifetime restricted to the support of the observation time. Specifically, we focus on estimation under the semi-parametric random censorship model (SRCM), that is, a random censorship model where the conditional expectation of the censoring indicator given the observation belongs to a parametric family. We show that some estimated linear functionals which are based on the new semi-parametric estimator are strong consistent, asymptotically normal, and efficient under SRCM. In a small simulation study, the performance of the new estimator is illustrated under moderate sample sizes. Finally, we apply the new estimator to a well-known real dataset.},
  language  = {en}
}
@article{SchoeningPoghossianYoshinobuetal.2001,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak and Yoshinobu, Tatsuo and L{\"u}th, Hans},
  title     = {Semiconductor-based field-effect structures for chemical sensing},
  pages     = {188 -- 198},
  year      = {2001},
  language  = {en}
}
@inproceedings{WernerYoshinobuMiyamotoetal.2014,
  author    = {Werner, Frederik and Yoshinobu, T. and Miyamoto, K. and Sch{\"o}ning, Michael Josef and Wagner, Torsten},
  title     = {Semiconductor-based sensors for imaging of chemical processes},
  series = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  booktitle = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  publisher = {VDE-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  isbn      = {978-3-8007-3622-5},
  pages     = {1 -- 5},
  year      = {2014},
  language  = {en}
}
@article{PoghossianAbouzarChristiaensetal.2008,
  author    = {Poghossian, Arshak and Abouzar, Maryam H. and Christiaens, P. and Williams, O. A. and Haenen, K. and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Sensing charged macromolecules with nanocrystalline diamond-based field-effect capacitive sensors},
  series = {Journal of Contemporary Physics. 43 (2008), H. 2},
  journal   = {Journal of Contemporary Physics. 43 (2008), H. 2},
  isbn      = {1934-9378},
  pages     = {77 -- 81},
  year      = {2008},
  language  = {en}
}
@article{WuPoghossianBronderetal.2016,
  author    = {Wu, Chunsheng and Poghossian, Arshak and Bronder, Thomas and Sch{\"o}ning, Michael Josef},
  title     = {Sensing of double-stranded DNA molecules by their intrinsic molecular charge using the light-addressable potentiometric sensor},
  series = {Sensors and Actuators B: Chemical},
  journal   = {Sensors and Actuators B: Chemical},
  number    = {229},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2016.02.004},
  pages     = {506 -- 512},
  year      = {2016},
  abstract  = {A multi-spot light-addressable potentiometric sensor (LAPS), which belongs to the family of semiconductor field-effect devices, was applied for label-free detection of double-stranded deoxyribonucleic acid (dsDNA) molecules by their intrinsic molecular charge. To reduce the distance between the DNA charge and sensor surface and thus, to enhance the electrostatic coupling between the dsDNA molecules and the LAPS, the negatively charged dsDNA molecules were electrostatically adsorbed onto the gate surface of the LAPS covered with a positively charged weak polyelectrolyte layer of PAH (poly(allylamine hydrochloride)). The surface potential changes in each spot of the LAPS, induced by the layer-by-layer adsorption of a PAH/dsDNA bilayer, were recorded by means of photocurrent-voltage and constant-photocurrent measurements. In addition, the surface morphology of the gate surface before and after consecutive electrostatic adsorption of PAH and dsDNA layers was studied by atomic force microscopy measurements. Moreover, fluorescence microscopy was used to verify the successful adsorption of dsDNA molecules onto the PAH-modified LAPS surface. A high sensor signal of 25 mV was registered after adsorption of 10 nM dsDNA molecules. The lower detection limit is down to 0.1 nM dsDNA. The obtained results demonstrate that the PAH-modified LAPS device provides a convenient and rapid platform for the direct label-free electrical detection of in-solution hybridized dsDNA molecules.},
  language  = {en}
}
@article{KrauseSchuppeSaureetal.1988,
  author    = {Krause, Gregor and Schuppe, W.D. and Saure, M. and Andress, H.},
  title     = {Sensitive Analytical and Physical Methods for Diagnosis of Variations in Polyolefin Plaques and Cable Insulations / W.D. Schuppe, M. Saure, H. Andress, K. M{\"o}ller, D. Meurer, G. Krause},
  series = {Proceedings of the 32nd session : 28th August - 3rd September.},
  journal   = {Proceedings of the 32nd session : 28th August - 3rd September.},
  year      = {1988},
  language  = {en}
}
@article{AchtsnichtNeuendorfFassbenderetal.2019,
  author    = {Achtsnicht, Stefan and Neuendorf, Christian and Faßbender, Tobias and N{\"o}lke, Greta and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim and Schr{\"o}per, Florian},
  title     = {Sensitive and rapid detection of cholera toxin subunit B using magnetic frequency mixing detection},
  series = {Plos One},
  volume    = {14},
  journal   = {Plos One},
  number    = {7},
  publisher = {Plos},
  address   = {San Francisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0219356},
  pages     = {e0219356},
  year      = {2019},
  abstract  = {Cholera is a life-threatening disease caused by the cholera toxin (CT) as produced by some Vibrio cholerae serogroups. In this research we present a method which directly detects the toxin's B subunit (CTB) in drinking water. For this purpose we performed a magnetic sandwich immunoassay inside a 3D immunofiltration column. We used two different commercially available antibodies to capture CTB and for binding to superparamagnetic beads. ELISA experiments were performed to select the antibody combination. The beads act as labels for the magnetic frequency mixing detection technique. We show that the limit of detection depends on the type of magnetic beads. A nonlinear Hill curve was fitted to the calibration measurements by means of a custom-written python software. We achieved a sensitive and rapid detection of CTB within a broad concentration range from 0.2 ng/ml to more than 700 ng/ml.},
  language  = {en}
}
@article{CornelisGivanoudiYongabietal.2019,
  author    = {Cornelis, Peter and Givanoudi, Stella and Yongabi, Derick and Iken, Heiko and Duw{\´e}, Sam and Deschaume, Olivier and Robbens, Johan and Dedecker, Peter and Bartic, Carmen and W{\"u}bbenhorst, Michael and Sch{\"o}ning, Michael Josef and Heyndrickx, Marc and Wagner, Patrick},
  title     = {Sensitive and specific detection of E. coli using biomimetic receptors in combination with a modified heat-transfer method},
  series = {Biosensors and Bioelectronics},
  volume    = {136},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2019.04.026},
  pages     = {97 -- 105},
  year      = {2019},
  language  = {en}
}
@article{DiktaDegenringFroemmeletal.2004,
  author    = {Dikta, Gerhard and Degenring, D. and Froemmel, C. and Takors, R.},
  title     = {Sensitivity analysis for the reduction of complex metabolism models / Degenring, D. ; Froemmel, C. ; Dikta, G.; Takors, R.},
  series = {Journal of Process Control. 14 (2004)},
  journal   = {Journal of Process Control. 14 (2004)},
  isbn      = {0959-1524},
  pages     = {729 -- 745},
  year      = {2004},
  language  = {en}
}
@inproceedings{RingsLudowicyFingeretal.2019,
  author    = {Rings, Ren{\´e} and Ludowicy, Jonas and Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {Sensitivity Analysis of General Aviation Aircraft with Parallel Hybrid-Electric Propulsion Systems},
  series = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  booktitle = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  pages     = {14 Seiten},
  year      = {2019},
  language  = {en}
}
@article{Staat1993,
  author    = {Staat, Manfred},
  title     = {Sensitivity of and Influences on the Reliability of an HTR-Module Primary Circuit Pressure Boundary},
  series = {Transactions of the 12th International Conference on Structural Mechanics in Reactor Technology (SMiRT-12) / Kussmaul, K. [ed]},
  journal   = {Transactions of the 12th International Conference on Structural Mechanics in Reactor Technology (SMiRT-12) / Kussmaul, K. [ed]},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0-444-81515-5},
  pages     = {147 -- 152},
  year      = {1993},
  language  = {en}
}
@inproceedings{Bung2012,
  author    = {Bung, Daniel Bernhard},
  title     = {Sensitivity of phase detection techniques in aerated chute flows to hydraulic design parameters},
  series = {2nd European IAHR congress : 27. - 29. June 2012, M{\"u}nchen},
  booktitle = {2nd European IAHR congress : 27. - 29. June 2012, M{\"u}nchen},
  publisher = {Lehrstuhl u. Versuchsanst. f{\"u}r Wasserbau u. Wasserwirtschaft d. TU M{\"u}nchen},
  address   = {M{\"u}nchen},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {978-3-943683-03-5},
  pages     = {Artikelkennnummer: B15},
  year      = {2012},
  language  = {en}
}
@article{BuehlerChristenKowalskietal.2011,
  author    = {B{\"u}hler, Yves and Christen, Marc and Kowalski, Julia and Bartelt, Perry},
  title     = {Sensitivity of snow avalanche simulations to digital elevation model quality and resolution},
  series = {Annals of Glaciology},
  volume    = {52},
  journal   = {Annals of Glaciology},
  number    = {58},
  publisher = {Cambridge University Press},
  address   = {Cambridge},
  isbn      = {1727-5644},
  pages     = {72 -- 80},
  year      = {2011},
  abstract  = {Digital elevation models (DEMs), represent the three-dimensional terrain and are the basic input for numerical snow avalanche dynamics simulations. DEMs can be acquired using topographic maps or remote-sensing technologies, such as photogrammetry or lidar. Depending on the acquisition technique, different spatial resolutions and qualities are achieved. However, there is a lack of studies that investigate the sensitivity of snow avalanche simulation algorithms to the quality and resolution of DEMs. Here, we perform calculations using the numerical avalance dynamics model RAMMS, varying the quality and spatial resolution of the underlying DEMs, while holding the simulation parameters constant. We study both channelized and open-terrain avalanche tracks with variable roughness. To quantify the variance of these simulations, we use well-documented large-scale avalanche events from Davos, Switzerland (winter 2007/08), and from our large-scale avalanche test site, Valĺee de la Sionne (winter 2005/06). We find that the DEM resolution and quality is critical for modeled flow paths, run-out distances, deposits, velocities and impact pressures. Although a spatial resolution of ~25 m is sufficient for large-scale avalanche modeling, the DEM datasets must be checked carefully for anomalies and artifacts before using them for dynamics calculations.},
  language  = {en}
}
@article{ValeroBung2016,
  author    = {Valero, Daniel and Bung, Daniel Bernhard},
  title     = {Sensitivity of turbulent Schmidt number and turbulence model to simulations of jets in crossflow},
  series = {Environmental Modelling and Software},
  volume    = {82},
  journal   = {Environmental Modelling and Software},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1364-8152 (electronic)},
  doi       = {10.1016/j.envsoft.2016.04.030},
  pages     = {218 -- 228},
  year      = {2016},
  abstract  = {Environmental discharges have been traditionally designed by means of cost-intensive and time-consuming experimental studies. Some extensively validated models based on an integral approach have been often employed for water quality problems, as recommended by USEPA (i.e.: CORMIX). In this study, FLOW-3D is employed for a full 3D RANS modelling of two turbulent jet-to-crossflow cases, including free surface jet impingement. Results are compared to both physical modelling and CORMIX to better assess model performance. Turbulence measurements have been collected for a better understanding of turbulent diffusion's parameter sensitivity. Although both studied models are generally able to reproduce jet trajectory, jet separation downstream of the impingement has been reproduced only by RANS modelling. Additionally, concentrations are better reproduced by FLOW-3D when the proper turbulent Schmidt number is used. This study provides a recommendation on the selection of the turbulence model and the turbulent Schmidt number for future outfall structures design studies.},
  language  = {en}
}
@inproceedings{BueckingPfaffDirksmeier2018,
  author    = {B{\"u}cking, Henrik and Pfaff, Raphael and Dirksmeier, Roger},
  title     = {Sensor positioning and thermal model for condition monitoring of pressure gas reservoirs in vehicles},
  series = {Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018},
  booktitle = {Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018},
  pages     = {5 Seiten},
  year      = {2018},
  language  = {en}
}
@inproceedings{AltherrConzenElsenetal.2023,
  author    = {Altherr, Lena and Conzen, Max and Elsen, Ingo and Frauenrath, Tobias and Lyrmann, Andreas},
  title     = {Sensor retrofitting of existing buildings in an interdisciplinary teaching project at university level},
  series = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  booktitle = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-01-6},
  doi       = {10.33968/2023.04},
  pages     = {31 -- 40},
  year      = {2023},
  abstract  = {Existing residential buildings have an average lifetime of 100 years. Many of these buildings will exist for at least another 50 years. To increase the efficiency of these buildings while keeping costs at reasonable rates, they can be retrofitted with sensors that deliver information to central control units for heating, ventilation and electricity. This retrofitting process should happen with minimal intervention into existing infrastructure and requires new approaches for sensor design and data transmission. At FH Aachen University of Applied Sciences, students of different disciplines work together to learn how to design, build, deploy and operate such sensors. The presented teaching project already created a low power design for a combined CO2, temperature and humidity measurement device that can be easily integrated into most home automation systems},
  language  = {en}
}
@article{SchusserKrischerMolinetal.2015,
  author    = {Schusser, Sebastian and Krischer, M. and Molin, D. G. M. and Akker, N. M. S. van den and B{\"a}cker, Matthias and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Sensor System for in-situ and Real-time Monitoring of Polymer (bio) degradation},
  series = {Procedia Engineering},
  volume    = {120},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2015.08.815},
  pages     = {948 -- 951},
  year      = {2015},
  abstract  = {A sensor system for investigating (bio)degradationprocesses of polymers is presented. The system utilizes semiconductor field-effect sensors and is capable of monitoring the degradation process in-situ and in real-time. The degradation of the polymer poly(d,l-lactic acid) is exemplarily monitored in solutions with different pH value, pH-buffer solution containing the model enzyme lipase from Rhizomucormiehei and cell-culture medium containing supernatants from stimulated and non-stimulated THP-1-derived macrophages mimicking activation of the immune system.},
  language  = {en}
}
@inproceedings{BaeckerSchusserLeinhosetal.2014,
  author    = {B{\"a}cker, Matthias and Schusser, Sebastian and Leinhos, Marcel and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Sensor system for the monitoring of degradation processes of biodegradable biopolymers},
  series = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  booktitle = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  publisher = {VDE-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  isbn      = {978-3-8007-3622-5},
  pages     = {1 -- 4},
  year      = {2014},
  language  = {en}
}
@phdthesis{Schusser2015,
  author    = {Schusser, Sebastian},
  title     = {Sensor-based degradation monitoring for the evaluation of (bio)degradable polymers},
  publisher = {Universiteit Hasselt ; FH Aachen},
  address   = {Hasselt ; Aachen},
  pages     = {145 Seiten},
  year      = {2015},
  language  = {en}
}
@inproceedings{LoebSchartnerSeboldtetal.2006,
  author    = {Loeb, Horst W. and Schartner, Karl-Heinz and Seboldt, Wolfgang and Dachwald, Bernd and Streppel, Joern and Meusemann, Hans and Sch{\"u}lke, Peter},
  title     = {SEP for a lander mission to the jovian moon europa},
  series = {57th International Astronautical Congress},
  booktitle = {57th International Astronautical Congress},
  doi       = {10.2514/6.IAC-06-C4.4.04},
  pages     = {1 -- 12},
  year      = {2006},
  abstract  = {Under DLR-contract, Giessen University and DLR Cologne are studying solar-electric propulsion missions (SEP) to the outer regions of the solar system. The most challenging reference mission concerns the transport of a 1.35-tons chemical lander spacecraft into an 80-RJ circular orbit around Jupiter, which would enable to place a 375 kg lander with 50 kg of scientific instruments on the surface of the icy moon "Europa". Thorough analyses show that the best solution in terms of SEP launch mass times thrusting time would be a two-stage EP module and a triple-junction solar array with concentrators which would be deployed step by step. Mission performance optimizations suggest to propel the spacecraft in the first EP stage by 6 gridded ion thrusters, running at 4.0 kV of beam voltage, which would save launch mass, and in the second stage by 4 thrusters with 1.25 to 1.5 kV of positive high voltage saving thrusting time. In this way, the launch mass of the spacecraft would be kept within 5.3 tons. Without a launcher's C3 and interplanetary gravity assists, Jupiter might be reached within about 4 yrs. The spiraling-down into the parking orbit would need another 1.8 yrs. This "large mission" can be scaled down to a smaller one, e.g., by halving all masses, the solar array power, and the number of thrusters. Due to their reliability, long lifetime and easy control, RIT-22 engines have been chosen for mission analysis. Based on precise tests, the thruster performance has been modeled.},
  language  = {en}
}
@inproceedings{LoebSchartnerDachwaldetal.2007,
  author    = {Loeb, Horst Wolfgang and Schartner, Karl-Heinz and Dachwald, Bernd and Seboldt, Wolfgang},
  title     = {SEP-Sample return from a main belt asteroid},
  series = {30th International Electric Propulsion Conference},
  booktitle = {30th International Electric Propulsion Conference},
  pages     = {1 -- 11},
  year      = {2007},
  abstract  = {By DLR-contact, sample return missions to the large main-belt asteroid "19, Fortuna" have been studied. The mission scenario has been based on three ion thrusters of the RIT-22 model, which is presently under space qualification, and on solar arrays equipped with triple-junction GaAs solar cells. After having designed the spacecraft, the orbit-to-orbit trajectories for both, a one-way SEP mission with a chemical sample return and an all-SEP return mission, have been optimized using a combination of artificial neural networks with evolutionary algorithms. Additionally, body-to-body trajectories have been investigated within a launch period between 2012 and 2015. For orbit-to-orbit calculation, the launch masses of the hybrid mission and of the all-SEP mission resulted in 2.05 tons and 1.56 tons, respectively, including a scientific payload of 246 kg. For the related transfer durations 4.14 yrs and 4.62 yrs were obtained. Finally, a comparison between the mission scenarios based on SEP and on NEP have been carried out favouring clearly SEP.},
  language  = {en}
}
@article{DiktaKurtzStute1989,
  author    = {Dikta, Gerhard and Kurtz, B. and Stute, W.},
  title     = {Sequential Fixed-Width Confidence Bands for Distribution Functions Under Random Censoring},
  series = {Metrika. 36 (1989)},
  journal   = {Metrika. 36 (1989)},
  isbn      = {0026-1335},
  pages     = {167 -- 176},
  year      = {1989},
  language  = {en}
}
@misc{DuweSchlegelTippkoetteretal.2014,
  author    = {Duwe, A. and Schlegel, C. and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Sequentielle Extraktion von Cellulose zur effizienten Nutzung der Stoffstr{\"o}me in der Holzbioraffinerie},
  series = {Chemie Ingenieur Technik},
  volume    = {86},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201450308},
  pages     = {1400},
  year      = {2014},
  abstract  = {In der Reihe der nachwachsenden Rohstoffe besitzt Holz als erneuerbare und umweltfreundliche Ressource ein großes Potenzial. {\"U}ber 11 Mio. ha Holz, das laut der Fachagentur f{\"u}r nachwachsende Rohstoffe (FNR) auch f{\"u}r industrielle Zwecke genutzt werden kann, wuchsen im Jahr 2013 allein auf bundesdeutscher Fl{\"a}che. 56,8 Mio. m³ j{\"a}hrlicher Holzeinschlag in den letzten zehn Jahren wurde zu knapp der H{\"a}lfte stofflich und der Rest energetisch verwertet. Im Rahmen dieser Arbeit konnte auf der Basis vom Holz der Buche, die nach Fichte und Kiefer die dritth{\"a}ufigste Baumart in Deutschland ist und 15\% der deutschen Waldfl{\"a}che ausmacht, die Fraktionierung der polymeren Hauptbestandteile mit niedrigem energetischen Einsatz erreicht werden. Hierbei werden in einem nachgeschalteten Extraktionsprozess die beiden Komponenten Hemicellulose und Lignin in fl{\"u}ssiger Form von der finalen festen Cellulosefraktion abgetrennt. Die Extraktion der Hemicellulose erfolgt durch eine Liquid Hot Water (LHW)-Behandlung. Untersucht wird der katalytische Zusatz anorganischer S{\"a}uren wie H₃PO₄ und H₂SO₄. Im Hinblick auf die weitere Verwertung von Lignin zu aromatischen Synthesebausteinen kommt die Organosolv-Extraktion mit einem Ethanol/Wasser-Gemisch zum Einsatz. Von Vorteil ist die weitere Verwendung beider Stoffstr{\"o}me ohne F{\"a}llungsschritt und nachteiliger Verd{\"u}nnung der Hemicellulose.},
  language  = {en}
}
@article{KaemperBergBegemannetal.1998,
  author    = {K{\"a}mper, Klaus-Peter and Berg, U. and Begemann, M. and Hagemann, B. (u.a.)},
  title     = {Series production and testing of a micro motor. Serienfertigung und Pr{\"u}fung eines Mikromotors},
  series = {Actuator 98 : 6th International Conference on New Actuators ; 17 - 19 June, 1998, Bremen, Germany ; conference proceedings / ed.: Hubert Borgmann ...},
  journal   = {Actuator 98 : 6th International Conference on New Actuators ; 17 - 19 June, 1998, Bremen, Germany ; conference proceedings / ed.: Hubert Borgmann ...},
  publisher = {Messe Bremen},
  address   = {Bremen},
  isbn      = {3-933339-00-6},
  pages     = {552 -- 555},
  year      = {1998},
  language  = {en}
}
@inproceedings{VedralWollert2005,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg},
  title     = {Service based Bluetooth dual-hop networks using CORBA},
  series = {Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria},
  booktitle = {Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria},
  publisher = {Acta Pr.},
  address   = {Anaheim, Calif.},
  organization    = {International Conference on Artificial Intelligence and Applications <2005, Innsbruck> ; International Multi-Conference on Applied Informatics <23, 2005, Innsbruck>},
  isbn      = {0-88986-457-8},
  pages     = {724 -- 728},
  year      = {2005},
  language  = {en}
}
@article{CzarneckiWinkelmannSpiliopoulou2010,
  author    = {Czarnecki, Christian and Winkelmann, Axel and Spiliopoulou, Myra},
  title     = {Services in electronic telecommunication markets: a framework for planning the virtualization of processes},
  series = {Electronic Markets},
  volume    = {20},
  journal   = {Electronic Markets},
  number    = {3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1422-8890},
  doi       = {10.1007/s12525-010-0045-8},
  pages     = {197 -- 207},
  year      = {2010},
  abstract  = {The potential of electronic markets in enabling innovative product bundles through flexible and sustainable partnerships is not yet fully exploited in the telecommunication industry. One reason is that bundling requires seamless de-assembling and re-assembling of business processes, whilst processes in telecommunication companies are often product-dependent and hard to virtualize. We propose a framework for the planning of the virtualization of processes, intended to assist the decision maker in prioritizing the processes to be virtualized: (a) we transfer the virtualization pre-requisites stated by the Process Virtualization Theory in the context of customer-oriented processes in the telecommunication industry and assess their importance in this context, (b) we derive IT-oriented requirements for the removal of virtualization barriers and highlight their demand on changes at different levels of the organization. We present a first evaluation of our approach in a case study and report on lessons learned and further steps to be performed.},
  language  = {en}
}
@book{JanzEblingGottschalketal.1999,
  author    = {Janz, Norbert and Ebling, G{\"u}nther and Gottschalk, Sandra and Licht, Georg},
  title     = {Services in the Future. Innovation Activities in the Service Sector. Survey 1998 (English translation) / Janz, N., G. Ebling, S. Gottschalk, G. Licht und H. Niggemann},
  publisher = {ZEW Zentrum f{\"u}r Europ{\"a}ische Wirtschaftsforschung},
  address   = {Mannheim},
  year      = {1999},
  language  = {en}
}
@book{JanzEblingGottschalketal.2000,
  author    = {Janz, Norbert and Ebling, G{\"u}nther and Gottschalk, Sandra and Niggemann, Hiltrud},
  title     = {Services in the Fu­ture: Innovation Activities in the Service Sector. Survey 1999 (English translation) / Janz, N., G. Ebling, S. Gottschalk und H. Niggemann},
  publisher = {ZEW Zentrum f{\"u}r Europ{\"a}ische Wirtschaftsforschung},
  address   = {Mannheim},
  year      = {2000},
  language  = {en}
}
@article{NachtrodtTietschMostaccietal.2014,
  author    = {Nachtrodt, Frederik and Tietsch, Wolfgang and Mostacci, Domiziano and Scherer, Ulrich W.},
  title     = {Set-up and first operation of a plasma oven for treatment of low level radioactive wastes},
  series = {Nuclear technology and radiation protection},
  volume    = {29},
  journal   = {Nuclear technology and radiation protection},
  number    = {Suppl.},
  publisher = {VINČA Institute of Nuclear Sciences},
  address   = {Belgrad},
  issn      = {1451-3994},
  doi       = {10.2298/NTRP140SS47N},
  pages     = {47 -- 51},
  year      = {2014},
  language  = {en}
}
@article{UmutluKraffFischeretal.2013,
  author    = {Umutlu, Lale and Kraff, Oliver and Fischer, Anja and Kinner, Sonja and Maderwald, Stefan and Nassenstein, Kai and Nensa, Felix and Gr{\"u}neisen, Johannes and Orzada, Stephan and Bitz, Andreas and Forsting, Michael and Ladd, Mark E. and Lauenstein, Thomas C.},
  title     = {Seven-Tesla MRI of the female pelvis},
  series = {European Radiology},
  volume    = {23},
  journal   = {European Radiology},
  number    = {9},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1084},
  doi       = {10.1007/s00330-013-2868-0},
  pages     = {2364 -- 2373},
  year      = {2013},
  language  = {en}
}
@misc{SponagelWachowitz1992,
  author    = {Sponagel, Stefan and Wachowitz, Waldemar},
  title     = {Shaft seal : United States Patent 5,143,385 ; date of patent: Sep. 1, 1992 / assignee: Firma Carl Freudenberg},
  publisher = {[United States Patent and Trademark Office]},
  address   = {[Alexandria, VA]},
  pages     = {5 S. : Ill.},
  year      = {1992},
  language  = {en}
}
@inproceedings{TranTranMatthiesetal.2016,
  author    = {Tran, Ngoc Trinh and Tran, Thanh Ngoc and Matthies, H. G. and Stavroulakis, G. E. and Staat, Manfred},
  title     = {Shakedown analysis of plate bending analysis under stochastic uncertainty by chance constrained programming},
  series = {ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece, 5-10 June 2016},
  booktitle = {ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece, 5-10 June 2016},
  editor    = {Papadrakakis, M.},
  pages     = {13 S.},
  year      = {2016},
  language  = {en}
}
@incollection{TranStaat2014,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Shakedown analysis of Reissner-Mindlin plates using the edge-based smoothed finite element method},
  series = {Direct methods for limit states in structures and materials / Dieter Weichert ; Alan Ponter, ed.},
  booktitle = {Direct methods for limit states in structures and materials / Dieter Weichert ; Alan Ponter, ed.},
  publisher = {Springer},
  address   = {Dordrecht [u.a.]},
  isbn      = {978-94-007-6826-0 (Print) 978-94-007-6827-7 (Online)},
  doi       = {10.1007/978-94-007-6827-7_5},
  pages     = {101 -- 117},
  year      = {2014},
  abstract  = {This paper concerns the development of a primal-dual algorithm for limit and shakedown analysis of Reissner-Mindlin plates made of von Mises material. At each optimization iteration, the lower bound of the shakedown load multiplier is calculated simultaneously with the upper bound using the duality theory. An edge-based smoothed finite element method (ES-FEM) combined with the discrete shear gap (DSG) technique is used to improve the accuracy of the solutions and to avoid the transverse shear locking behaviour. The method not only possesses all inherent features of convergence and accuracy from ES-FEM, but also ensures that the total number of variables in the optimization problem is kept to a minimum compared with the standard finite element formulation. Numerical examples are presented to demonstrate the effectiveness of the present method.},
  language  = {en}
}
@article{VuStaat2007,
  author    = {Vu, Duc Khoi and Staat, Manfred},
  title     = {Shakedown analysis of structures made of materials with temperature-dependent yield stress},
  series = {International Journal of Solids and Structures. 44 (2007), H. 13},
  journal   = {International Journal of Solids and Structures. 44 (2007), H. 13},
  isbn      = {0020-7683},
  pages     = {4524 -- 4540},
  year      = {2007},
  language  = {en}
}
@article{TranStaat2010,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Shakedown analysis of two dimensional structures by an edge-based smoothed finite element method},
  pages     = {1 -- 7},
  year      = {2010},
  language  = {en}
}
@incollection{TranTranMatthiesetal.2017,
  author    = {Tran, N. T. and Tran, Thanh Ngoc and Matthies, M. G. and Stavroulakis, G. E. and Staat, Manfred},
  title     = {Shakedown Analysis Under Stochastic Uncertainty by Chance Constrained Programming},
  series = {Advances in Direct Methods for Materials and Structures},
  booktitle = {Advances in Direct Methods for Materials and Structures},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-59810-9},
  doi       = {10.1007/978-3-319-59810-9_6},
  pages     = {85 -- 103},
  year      = {2017},
  abstract  = {In this paper we propose a stochastic programming method to analyse limit and shakedown of structures under uncertainty condition of strength. Based on the duality theory, the shakedown load multiplier formulated by the kinematic theorem is proved actually to be the dual form of the shakedown load multiplier formulated by static theorem. In this investigation a dual chance constrained programming algorithm is developed to calculate simultaneously both the upper and lower bounds of the plastic collapse limit and the shakedown limit. The edge-based smoothed finite element method (ES-FEM) with three-node linear triangular elements is used for structural analysis.},
  language  = {en}
}
@article{StaatHeitzerReinersetal.2003,
  author    = {Staat, Manfred and Heitzer, M. and Reiners, H. and Schubert, F.},
  title     = {Shakedown and ratchetting under tension-torsion loadings: analysis and experiments},
  series = {Nuclear Engineering and Design. 225 (2003), H. 1},
  journal   = {Nuclear Engineering and Design. 225 (2003), H. 1},
  isbn      = {0029-5493},
  pages     = {11 -- 26},
  year      = {2003},
  language  = {en}
}
@article{KowalskiMcElwaine2013,
  author    = {Kowalski, Julia and McElwaine, Jim N.},
  title     = {Shallow two-component gravity-driven flows with vertical variation},
  series = {Journal of Fluid Mechanics},
  volume    = {714},
  journal   = {Journal of Fluid Mechanics},
  publisher = {Cambridge Univ. Press},
  address   = {Cambridge},
  isbn      = {0022-1120},
  pages     = {434 -- 462},
  year      = {2013},
  language  = {en}
}
@article{TurdumamatovBeldaHeuermann2024,
  author    = {Turdumamatov, Samat and Belda, Aljoscha and Heuermann, Holger},
  title     = {Shaping a decoupled atmospheric pressure microwave plasma with antenna structures, Maxwell's equations, and boundary conditions},
  series = {IEEE Transactions on Plasma Science},
  journal   = {IEEE Transactions on Plasma Science},
  number    = {Early Access},
  publisher = {IEEE},
  issn      = {0093-3813 (Print)},
  doi       = {10.1109/TPS.2024.3383589},
  pages     = {1 -- 9},
  year      = {2024},
  abstract  = {This article addresses the need for an innovative technique in plasma shaping, utilizing antenna structures, Maxwell's laws, and boundary conditions within a shielded environment. The motivation lies in exploring a novel approach to efficiently generate high-energy density plasma with potential applications across various fields. Implemented in an E01 circular cavity resonator, the proposed method involves the use of an impedance and field matching device with a coaxial connector and a specially optimized monopole antenna. This setup feeds a low-loss cavity resonator, resulting in a high-energy density air plasma with a surface temperature exceeding 3500 o C, achieved with a minimal power input of 80 W. The argon plasma, resembling the shape of a simple monopole antenna with modeled complex dielectric values, offers a more energy-efficient alternative compared to traditional, power-intensive plasma shaping methods. Simulations using a commercial electromagnetic (EM) solver validate the design's effectiveness, while experimental validation underscores the method's feasibility and practical implementation. Analyzing various parameters in an argon atmosphere, including hot S -parameters and plasma beam images, the results demonstrate the successful application of this technique, suggesting its potential in coating, furnace technology, fusion, and spectroscopy applications.},
  language  = {en}
}
@inproceedings{MerkensHebel2021,
  author    = {Merkens, Torsten and Hebel, Christoph},
  title     = {Sharing mobility concepts - flexible, sustainable, smart},
  series = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG) International Conference},
  booktitle = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG) International Conference},
  isbn      = {978-3-902103-94-9},
  pages     = {43 -- 44},
  year      = {2021},
  language  = {en}
}
@inproceedings{QuadfliegSchoeneSchleseretal.2012,
  author    = {Quadflieg, Till and Schoene, Jens and Schleser, Markus and Jockenh{\"o}vel, Stefan and Reisgen, Uwe and Gries, Thomas},
  title     = {Shear connectors for hybrid joints of metal and FRP},
  series = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference},
  booktitle = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference},
  editor    = {Heslehurst, Rikard Benton},
  publisher = {Composites Australia},
  address   = {Hawthorne},
  isbn      = {978-0-9873285-0-2},
  pages     = {[152] -- [160]},
  year      = {2012},
  language  = {en}
}
@article{KellerRathBruckmannetal.2020,
  author    = {Keller, Johannes and Rath, Volker and Bruckmann, Johanna and Mottaghy, Darius and Clauser, Christoph and Wolf, Andreas and Seidler, Ralf and B{\"u}cker, H. Martin and Klitzsch, Norbert},
  title     = {SHEMAT-Suite: An open-source code for simulating flow, heat and species transport in porous media},
  series = {SoftwareX},
  volume    = {12},
  journal   = {SoftwareX},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2352-7110},
  doi       = {10.1016/j.softx.2020.100533},
  pages     = {9},
  year      = {2020},
  abstract  = {SHEMAT-Suite is a finite-difference open-source code for simulating coupled flow, heat and species transport in porous media. The code, written in Fortran-95, originates from geoscientific research in the fields of geothermics and hydrogeology. It comprises: (1) a versatile handling of input and output, (2) a modular framework for subsurface parameter modeling, (3) a multi-level OpenMP parallelization, (4) parameter estimation and data assimilation by stochastic approaches (Monte Carlo, Ensemble Kalman filter) and by deterministic Bayesian approaches based on automatic differentiation for calculating exact (truncation error-free) derivatives of the forward code.},
  language  = {en}
}
@inproceedings{BitzStreckertHansenetal.2001,
  author    = {Bitz, Andreas and Streckert, J. and Hansen, V.W. and Stogbauer, F.},
  title     = {Shielded RF-exposure system with an integrated LF-measuring system for in vitro experiments with cell-layers},
  series = {Proceedings of the Ebea 2001 : 5th International Congress of the European Bioelectromagnetics Association (Ebea) ; 6-8 September 2001, Marina Congress Center, Helsinki, Finland},
  booktitle = {Proceedings of the Ebea 2001 : 5th International Congress of the European Bioelectromagnetics Association (Ebea) ; 6-8 September 2001, Marina Congress Center, Helsinki, Finland},
  editor    = {Hietanen, Maila and Jokela, Kari and Juutilainen, Jukka and Työterveyslaitos,},
  publisher = {Finnish Institute of Occupational Health},
  address   = {Helsinki},
  isbn      = {9789518024401},
  pages     = {67 -- 68},
  year      = {2001},
  language  = {en}
}
@article{KernZischankHeidleretal.1998,
  author    = {Kern, Alexander and Zischank, Wolfgang J. and Heidler, Fridolin and Wiesinger, J. [u.a.]},
  title     = {Shielding effectiveness of reinforced concrete cable ducts carrying partial lightning currents},
  series = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  journal   = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  address   = {Birmingham},
  year      = {1998},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels},
  series = {Applied surface science},
  volume    = {257},
  journal   = {Applied surface science},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-4332 (E-Journal); 0169-4332 (Print)},
  doi       = {10.1016/j.apsusc.2010.08.042},
  pages     = {1401 -- 1406},
  year      = {2010},
  abstract  = {The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.},
  language  = {en}
}
@inproceedings{HavermannSeilerHenning2010,
  author    = {Havermann, Marc and Seiler, F. and Henning, P.},
  title     = {Shock Tunnel Experiments and CFD Simulation of Lateral Jet Interaction in Hypersonic Flows},
  series = {New Results in Numerical and Experimental Fluid Mechanics VII; Contributions to the 16th STAB/DGLR Symposium Aachen, Germany 2008},
  booktitle = {New Results in Numerical and Experimental Fluid Mechanics VII; Contributions to the 16th STAB/DGLR Symposium Aachen, Germany 2008},
  editor    = {Dillmann, Andreas and Heller, Gerd and Klaas, Michael and Kreplin, Hans-Peter and Nitsche, Wolfgang and Schr{\"o}der, Wolfgang},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {9783642142437},
  doi       = {10.1007/978-3-642-14243-7_45},
  pages     = {365 -- 372},
  year      = {2010},
  language  = {en}
}
@article{HavermannEndeSeileretal.2005,
  author    = {Havermann, Marc and Ende, H. and Seiler, F. and Schwenzer, M.},
  title     = {Shock tunnel measurement of the interaction amplification factor for a hot gas side jet in a supersonic cross flow / Havermann, M. ; Ende, H. ; Seiler, F. ; Schwenzer, M.},
  series = {Shock Waves : Proceedings of the 24th International Symposium on Shock Waves Beijing, China July 11-16, 2004 / edited by Z. Jiang},
  journal   = {Shock Waves : Proceedings of the 24th International Symposium on Shock Waves Beijing, China July 11-16, 2004 / edited by Z. Jiang},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-22497-6},
  pages     = {113 -- 118},
  year      = {2005},
  language  = {en}
}
@book{Havermann2004,
  author    = {Havermann, Marc},
  title     = {Shock tunnel measurement of the interaction amplification factor for a hot gas side jet in a supersonic cross-flow : 24th International Symposium on Shock Waves, Beijing, China, July 11 - 16, 2004 / Institut Franco-Allemand de Recherches de Saint-Louis. Havermann, M. ...},
  publisher = {ISL},
  address   = {Saint-Louis},
  pages     = {6 S. : Ill., graph. Darst.},
  year      = {2004},
  language  = {en}
}
@book{HavermannEndeSchwenzer2002,
  author    = {Havermann, Marc and Ende, Herrybert and Schwenzer, Michael},
  title     = {Shock tunnel study on the interaction of a lateral jet with a supersonic cross flow : West East High-Speed Flow Field Conference, Marseille, France, April 22 - 26, 2002; axe de recherches 2.14 / Havermann, M.; Ende, H.; Schwenzer, M. Institut Franco-Allemand de Recherches de Saint-Louis},
  publisher = {ISL},
  address   = {Saint-Louis},
  pages     = {8 S. : Ill., graph. Darst.},
  year      = {2002},
  language  = {en}
}
@article{SchlamannYoonMaderwaldetal.2010,
  author    = {Schlamann, Marc and Yoon, Min-Suk and Maderwald, Stefan and Pietrzyk, Thomas and Bitz, Andreas and Gerwig, Marcus and Forsting, Michael and Ladd, Susanne C. and Ladd, Mark E. and Kastrup, Oliver},
  title     = {Short term effects of magnetic resonance imaging on excitability of the motor cortex at 1.5T and 7T},
  series = {Academic Radiology},
  volume    = {17},
  journal   = {Academic Radiology},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1076-6332},
  doi       = {10.1016/j.acra.2009.10.004},
  pages     = {277 -- 281},
  year      = {2010},
  abstract  = {Rationale and Objectives The increasing spread of high-field and ultra-high-field magnetic resonance imaging (MRI) scanners has encouraged new discussion of the safety aspects of MRI. Few studies have been published on possible cognitive effects of MRI examinations. The aim of this study was to examine whether changes are measurable after MRI examinations at 1.5 and 7 T by means of transcranial magnetic stimulation (TMS). Materials and Methods TMS was performed in 12 healthy, right-handed male volunteers. First the individual motor threshold was specified, and then the cortical silent period (SP) was measured. Subsequently, the volunteers were exposed to the 1.5-T MRI scanner for 63 minutes using standard sequences. The MRI examination was immediately followed by another TMS session. Fifteen minutes later, TMS was repeated. Four weeks later, the complete setting was repeated using a 7-T scanner. Control conditions included lying in the 1.5-T scanner for 63 minutes without scanning and lying in a separate room for 63 minutes. TMS was performed in the same way in each case. For statistical analysis, Wilcoxon's rank test was performed. Results Immediately after MRI exposure, the SP was highly significantly prolonged in all 12 subjects at 1.5 and 7 T. The motor threshold was significantly increased. Fifteen minutes after the examination, the measured value tended toward normal again. Control conditions revealed no significant differences. Conclusion MRI examinations lead to a transient and highly significant alteration in cortical excitability. This effect does not seem to depend on the strength of the static magnetic field.},
  language  = {en}
}
@inproceedings{WangMensingGligorevicetal.2008,
  author    = {Wang, W. and Mensing, C. and Gligorevic, Snjezana and Jost, T. and Dammann, A.},
  title     = {Short term statistical analysis of outdoor to indoor propagation channel for geolocations},
  series = {Proceedings of the 13th International OFDM Workshop : (InOWo '08), Aug. 27./28. 2008, Hamburg : Session 3A: Systems concepts},
  booktitle = {Proceedings of the 13th International OFDM Workshop : (InOWo '08), Aug. 27./28. 2008, Hamburg : Session 3A: Systems concepts},
  organization    = {International OFDM Workshop <13, 2008, Hamburg>},
  pages     = {85 -- 89},
  year      = {2008},
  language  = {en}
}
@article{HacklKahmannWegmannetal.2016,
  author    = {Hackl, Michael and Kahmann, Stephanie Lucina and Wegmann, Kilian and Ries, Christian and Staat, Manfred and M{\"u}ller, Lars-Peter},
  title     = {Shortening osteotomy of the proximal radius — a treatment option for isolated osteoarthritis of the lateral column of the elbow joint?},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {128 -- 129},
  year      = {2016},
  abstract  = {Treatment of posttraumatic osteoarthritis of the radial column of the elbow joint remains a challenging yet common issue. While partial joint replacement leads to high revision rates, radial head excision has shown to severely increase joint instability. Shortening osteotomy of the radius could be an option to decrease the contact pressure of the radiohumeral joint and thereby pain levels without causing valgus instability. Hence, the aim of this biomechanical study was to evaluate the effects of radial shortening on axial load distribution and valgus stability of the elbow joint.},
  language  = {en}
}
@article{SchaeferShaoScholletal.1996,
  author    = {Sch{\"a}fer, Horst and Shao, H. and Scholl, H. and Gersch{\"u}tz, J. (u.a.)},
  title     = {Shubnikov - de Haas Oscillations of a Two - dimensional Electron Gas in a Modulation - Doped Zn0.80Cd0.20Se/ZnS0.06Se 0.94 Single Quantum Well},
  series = {Solid State Communications. 100 (1996), H. 11},
  journal   = {Solid State Communications. 100 (1996), H. 11},
  isbn      = {0038-1098},
  pages     = {739},
  year      = {1996},
  language  = {en}
}
@article{MuellerVeggianGonoHaennietal.1978,
  author    = {M{\"u}ller-Veggian, Mattea and Gono, Y. and Haenni, D. R. and Beuscher, H.},
  title     = {Side bands in ¹⁷² Hf},
  series = {Proceedings of the International Conference on Nuclear Structure : Tokyo, Sept. 5 - 10, 1977 / ed. by T. Marumori. - Journal of the Physical Society of Japan ; Vol. 44, 1978 : Suppl.},
  journal   = {Proceedings of the International Conference on Nuclear Structure : Tokyo, Sept. 5 - 10, 1977 / ed. by T. Marumori. - Journal of the Physical Society of Japan ; Vol. 44, 1978 : Suppl.},
  publisher = {Physical Soc. of Japan},
  address   = {Tokyo},
  pages     = {866},
  year      = {1978},
  language  = {en}
}
@article{MuellerVeggianBeuscherGonoetal.1977,
  author    = {M{\"u}ller-Veggian, Mattea and Beuscher, H. and Gono, Y. and Lieder, R. M.},
  title     = {Side bands in ¹⁷² Hf},
  series = {Fr{\"u}hjahrstagung ... des Fachausschusses Kernphysik und Hochenergiephysik der DPG (Sektion A: Kernphysik) / Deutsche Physikalische Gesellschaft (1977)},
  journal   = {Fr{\"u}hjahrstagung ... des Fachausschusses Kernphysik und Hochenergiephysik der DPG (Sektion A: Kernphysik) / Deutsche Physikalische Gesellschaft (1977)},
  pages     = {940},
  year      = {1977},
  language  = {en}
}
@article{MuellerVeggianHaenniGonoetal.1978,
  author    = {M{\"u}ller-Veggian, Mattea and Haenni, D. R. and Gono, Y. and Beuscher, H.},
  title     = {Side bands in ¹⁷² Hf},
  series = {Annual report 1977 / Institut f{\"u}r Kernphysik Kernforschungsanlage J{\"u}lich},
  journal   = {Annual report 1977 / Institut f{\"u}r Kernphysik Kernforschungsanlage J{\"u}lich},
  publisher = {Verlag des Forschungszentrums J{\"u}lich},
  address   = {J{\"u}lich},
  pages     = {43 -- 44},
  year      = {1978},
  language  = {en}
}
@article{MuellerVeggianNeskakisLiederetal.1981,
  author    = {M{\"u}ller-Veggian, Mattea and Neskakis, A. and Lieder, R. M. and Beuscher, H.},
  title     = {Side-bands in ¹⁸⁰ Os},
  series = {International Conference Nuclear and Atomic Physics With Heay Ions : Bucharest, Romania, 9 - 12 June 1981 / European Physcial Society, Nuclear Physics Division ; The Central Institute of Physics, Romania. - (Europhysics Conference abstracts ; Vol. 5 C)},
  journal   = {International Conference Nuclear and Atomic Physics With Heay Ions : Bucharest, Romania, 9 - 12 June 1981 / European Physcial Society, Nuclear Physics Division ; The Central Institute of Physics, Romania. - (Europhysics Conference abstracts ; Vol. 5 C)},
  publisher = {EPS},
  address   = {[Petit-Lancy]},
  pages     = {79 -- 80},
  year      = {1981},
  language  = {en}
}
@article{HillenEckenbachQuadfliegetal.1991,
  author    = {Hillen, Walter and Eckenbach, W. and Quadflieg, Peter and Zaengel, Thomas T.},
  title     = {Signal-to-noise performance of a CsI fluorescent screen},
  series = {Medical Imaging V: Image physics},
  journal   = {Medical Imaging V: Image physics},
  isbn      = {0-8194-0538-8},
  pages     = {120 -- 131},
  year      = {1991},
  language  = {en}
}
@article{HillenSchmittBockemuehl1995,
  author    = {Hillen, Walter and Schmitt, W. and Bockem{\"u}hl, J.},
  title     = {Signal-to-Noise Performance of a digital dental X-ray Detector},
  series = {Computer assisted radiology : proceedings of the International Symposium on Computer and Communication Systems for Image Guided Diagnosis and Therapy / CAR '95 Berlin, June 21 - 24, 1995. Ed. by H. U. Lemke},
  journal   = {Computer assisted radiology : proceedings of the International Symposium on Computer and Communication Systems for Image Guided Diagnosis and Therapy / CAR '95 Berlin, June 21 - 24, 1995. Ed. by H. U. Lemke},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-59177-X},
  pages     = {LXXIV, 1442 S. : Ill., graph. Darst.},
  year      = {1995},
  language  = {en}
}
@inproceedings{BhattaraiFrotscherStaat2016,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Staat, Manfred},
  title     = {Significance of fibre geometry on passive-active response of pelvic muscles to evaluate pelvic dysfunction},
  series = {BioMedWomen: Proceedings of the international conference on clinical and bioengineering for women's health},
  booktitle = {BioMedWomen: Proceedings of the international conference on clinical and bioengineering for women's health},
  editor    = {Natal Jorge, Renato},
  publisher = {CRC Press},
  address   = {Boca Raton},
  isbn      = {978-1-138-02910-1},
  pages     = {185 -- 188},
  year      = {2016},
  language  = {en}
}
@article{ThomaRavi2019,
  author    = {Thoma, Andreas and Ravi, Sridhar},
  title     = {Significance of parallel computing on the performance of Digital Image Correlation algorithms in MATLAB},
  pages     = {1 -- 17},
  year      = {2019},
  abstract  = {Digital Image Correlation (DIC) is a powerful tool used to evaluate displacements and deformations in a non-intrusive manner. By comparing two images, one of the undeformed reference state of a specimen and another of the deformed target state, the relative displacement between those two states is determined. DIC is well known and often used for post-processing analysis of in-plane displacements and deformation of specimen. Increasing the analysis speed to enable real-time DIC analysis will be beneficial and extend the field of use of this technique. Here we tested several combinations of the most common DIC methods in combination with different parallelization approaches in MATLAB and evaluated their performance to determine whether real-time analysis is possible with these methods. To reflect improvements in computing technology different hardware settings were also analysed. We found that implementation problems can reduce the efficiency of a theoretically superior algorithm such that it becomes practically slower than a suboptimal algorithm. The Newton-Raphson algorithm in combination with a modified Particle Swarm algorithm in parallel image computation was found to be most effective. This is contrary to theory, suggesting that the inverse-compositional Gauss-Newton algorithm is superior. As expected, the Brute Force Search algorithm is the least effective method. We also found that the correct choice of parallelization tasks is crucial to achieve improvements in computing speed. A poorly chosen parallelisation approach with high parallel overhead leads to inferior performance. Finally, irrespective of the computing mode the correct choice of combinations of integerpixel and sub-pixel search algorithms is decisive for an efficient analysis. Using currently available hardware realtime analysis at high framerates remains an aspiration.},
  language  = {en}
}
@misc{BerndtHoeckerKuropkaetal.1991,
  author    = {Berndt, Heinz and H{\"o}cker, Hartwig and Kuropka, Rolf and Kinkel, Joachim},
  title     = {Silane coated inorganic materials for chromatography : United States Patent},
  publisher = {[The United States Patent and Trademark Office]},
  address   = {[Alexandria, VA u.a.]},
  pages     = {9 S. : graph. Darst.},
  year      = {1991},
  language  = {en}
}
@article{SchoeningKloockKnobbeetal.2004,
  author    = {Sch{\"o}ning, Michael Josef and Kloock, Joachim P. and Knobbe, D.-T. and R{\"a}de, J. and Keusgen, M.},
  title     = {Silicon field-effect biosensor for cyanide detection},
  series = {Technical digest of the 10th International Meeting on Chemical Sensors, July 11 - 14, 2004, Tsukuba, Japan / Japan Association of Chemical Sensors},
  journal   = {Technical digest of the 10th International Meeting on Chemical Sensors, July 11 - 14, 2004, Tsukuba, Japan / Japan Association of Chemical Sensors},
  publisher = {Japan Association of Chemical Sensors},
  address   = {Fukuoka},
  pages     = {98 -- 99},
  year      = {2004},
  language  = {en}
}
@article{Schoening2000,
  author    = {Sch{\"o}ning, Michael Josef},
  title     = {Silicon recognizes biochemical parameters: Microchips for analytical sensor applications},
  series = {American Laboratory. 32 (2000), H. 16},
  journal   = {American Laboratory. 32 (2000), H. 16},
  isbn      = {0044-7749},
  pages     = {24 -- 31},
  year      = {2000},
  language  = {en}
}
@article{Schoening2003,
  author    = {Sch{\"o}ning, Michael Josef},
  title     = {Silicon-based biochemical sensors},
  series = {CNI - The Center of Nanoelectronic Systems for Information Technology},
  journal   = {CNI - The Center of Nanoelectronic Systems for Information Technology},
  publisher = {Foschungszentrum J{\"u}lich},
  pages     = {165 -- 170},
  year      = {2003},
  language  = {en}
}
@incollection{PoghossianSchoening2006,
  author    = {Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Silicon-based chemical and biological field-effect sensors},
  series = {Encyclopedia of Sensors. Vol. 9 S - Sk},
  booktitle = {Encyclopedia of Sensors. Vol. 9 S - Sk},
  publisher = {ASP, American Scientific Publ.},
  address   = {Stevenson Ranch, Calif.},
  isbn      = {1-58883-065-9},
  pages     = {463 -- 534},
  year      = {2006},
  language  = {en}
}
@article{SchoeningPoghossian2008,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {Silicon-based field-effect devices for (bio-)chemical sensing},
  series = {International Conference on Advanced Semiconductor Devices and Microsystems, 2008. ASDAM 2008},
  journal   = {International Conference on Advanced Semiconductor Devices and Microsystems, 2008. ASDAM 2008},
  address   = {Smolenice, Slovakia},
  isbn      = {978-1-4244-2325-5},
  pages     = {31 -- 38},
  year      = {2008},
  language  = {en}
}
@article{SchoeningPoghossian2009,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {Silicon-based field-effect devices with nanostructured surfaces for bio-/chemical sensing},
  series = {Semiconductor micro- and nanoelectronics : Proceedings of the Seventh International Conference , Tsakhcadzor, Armenia July 3-5 2009},
  journal   = {Semiconductor micro- and nanoelectronics : Proceedings of the Seventh International Conference , Tsakhcadzor, Armenia July 3-5 2009},
  pages     = {51 -- 53},
  year      = {2009},
  language  = {en}
}
@article{Schoening2003,
  author    = {Sch{\"o}ning, Michael Josef},
  title     = {Silicon-based field-effect structures - From dielectrics to bioelectronics},
  series = {Dielectrics in emerging technologies : proceedings of the international symposium ; [papers presented at the First International Symposium on Science and Technology of Dielectrics in Emerging Fields held from 27th April to 2nd May 2003 in Paris, France] / sponsoring divisions: Dielectric Science and Technology, Electronics. Ed.: D. Misra.},
  journal   = {Dielectrics in emerging technologies : proceedings of the international symposium ; [papers presented at the First International Symposium on Science and Technology of Dielectrics in Emerging Fields held from 27th April to 2nd May 2003 in Paris, France] / sponsoring divisions: Dielectric Science and Technology, Electronics. Ed.: D. Misra.},
  publisher = {Electrochemical Society},
  address   = {Pennington, NJ},
  isbn      = {1-56677-346-6},
  pages     = {31 -- 37},
  year      = {2003},
  language  = {en}
}
@article{PaulssenKueckmannAbram2007,
  author    = {Paulßen, Elisabeth and K{\"u}ckmann, Theresa and Abram, Ulrich},
  title     = {Silver(I) Complexes of 1,3-Dialkyl-4,5-dimethylimidazol-2-ylidenes and their Use as Precursors for the Synthesis of Rhenium(V) NHC Complexes},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  volume    = {633},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  number    = {5-6},
  issn      = {1521-3749},
  doi       = {10.1002/zaac.200700021},
  pages     = {830 -- 834},
  year      = {2007},
  language  = {en}
}
@article{OssmannKazay2000,
  author    = {Oßmann, Martin and Kazay, B.},
  title     = {Simple circuit provides high-side current sensing / Ossmann, M ; Kazay, B.},
  series = {EDN. 45 (2000), H. 21},
  journal   = {EDN. 45 (2000), H. 21},
  isbn      = {0012-7515},
  pages     = {200 -- 200},
  year      = {2000},
  language  = {en}
}
@article{SchwarzerMuellerKleineHering2004,
  author    = {Schwarzer, Klemens and M{\"u}ller, C. and Kleine-Hering, H.},
  title     = {Simple solar systems for heating, hot water and cooking in high altitude regions with high solar radiation / C. M{\"u}ller ; K. Schwarzer ; H. Kleine-Hering},
  series = {Proceedings / organised by: ISES Europe ... [Ed.: Deutsche Gesellschaft f{\"u}r Sonnenenergie e.V. - DGS, Munich ; PSE GmbH - Forschung Entwicklung Marketing, Freiburg]. - Vol 1},
  journal   = {Proceedings / organised by: ISES Europe ... [Ed.: Deutsche Gesellschaft f{\"u}r Sonnenenergie e.V. - DGS, Munich ; PSE GmbH - Forschung Entwicklung Marketing, Freiburg]. - Vol 1},
  publisher = {PSE},
  address   = {Freiburg [Breisgau]},
  isbn      = {3-9809656-1-9},
  pages     = {1-653-1-658},
  year      = {2004},
  language  = {en}
}
@article{MonakhovaDiehl2021,
  author    = {Monakhova, Yulia and Diehl, Bernd W. K.},
  title     = {Simplification of NMR Workflows by Standardization Using 2H Integral of Deuterated Solvent as Applied to Aloe vera Preparations},
  series = {Applied Magnetic Resonance},
  volume    = {52},
  journal   = {Applied Magnetic Resonance},
  number    = {11},
  publisher = {Springer},
  address   = {Cham},
  issn      = {1613-7507},
  doi       = {10.1007/s00723-021-01393-4},
  pages     = {1591 -- 1600},
  year      = {2021},
  abstract  = {In this study, a recently proposed NMR standardization approach by 2H integral of deuterated solvent for quantitative multicomponent analysis of complex mixtures is presented. As a proof of principle, the existing NMR routine for the analysis of Aloe vera products was modified. Instead of using absolute integrals of targeted compounds and internal standard (nicotinamide) from 1H-NMR spectra, quantification was performed based on the ratio of a particular 1H-NMR compound integral and 2H-NMR signal of deuterated solvent D2O. Validation characteristics (linearity, repeatability, accuracy) were evaluated and the results showed that the method has the same precision as internal standardization in case of multicomponent screening. Moreover, a dehydration process by freeze drying is not necessary for the new routine. Now, our NMR profiling of A. vera products needs only limited sample preparation and data processing. The new standardization methodology provides an appealing alternative for multicomponent NMR screening. In general, this novel approach, using standardization by 2H integral, benefits from reduced sample preparation steps and uncertainties, and is recommended in different application areas (purity determination, forensics, pharmaceutical analysis, etc.).},
  language  = {en}
}