@article{DiltheySchleserHanischetal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hanisch, Vera and Gries, Thomas},
  title     = {Garnzugpr{\"u}fung polymergetr{\"a}nkter Textilien f{\"u}r die Bewehrung von Beton},
  series = {Technische Textilien},
  volume    = {49},
  journal   = {Technische Textilien},
  number    = {1},
  issn      = {0323-3243},
  pages     = {48 -- 50},
  year      = {2006},
  language  = {de}
}
@article{UlmerBraunChengetal.2022,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Gamification of virtual reality assembly training: Effects of a combined point and level system on motivation and training results},
  series = {International Journal of Human-Computer Studies},
  volume    = {165},
  journal   = {International Journal of Human-Computer Studies},
  number    = {Art. No. 102854},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1071-5819},
  doi       = {10.1016/j.ijhcs.2022.102854},
  year      = {2022},
  abstract  = {Virtual Reality (VR) offers novel possibilities for remote training regardless of the availability of the actual equipment, the presence of specialists, and the training locations. Research shows that training environments that adapt to users' preferences and performance can promote more effective learning. However, the observed results can hardly be traced back to specific adaptive measures but the whole new training approach. This study analyzes the effects of a combined point and leveling VR-based gamification system on assembly training targeting specific training outcomes and users' motivations. The Gamified-VR-Group with 26 subjects received the gamified training, and the Non-Gamified-VR-Group with 27 subjects received the alternative without gamified elements. Both groups conducted their VR training at least three times before assembling the actual structure. The study found that a level system that gradually increases the difficulty and error probability in VR can significantly lower real-world error rates, self-corrections, and support usages. According to our study, a high error occurrence at the highest training level reduced the Gamified-VR-Group's feeling of competence compared to the Non-Gamified-VR-Group, but at the same time also led to lower error probabilities in real-life. It is concluded that a level system with a variable task difficulty should be combined with carefully balanced positive and negative feedback messages. This way, better learning results, and an improved self-evaluation can be achieved while not causing significant impacts on the participants' feeling of competence.},
  language  = {en}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {F{\"u}r viele, viele bunte Smarties : komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung},
  series = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik},
  volume    = {30},
  journal   = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik},
  number    = {H. 6},
  issn      = {1430-9807},
  pages     = {30 -- 32},
  year      = {1998},
  language  = {de}
}
@article{SedlacekSchaetzkeGessleretal.2004,
  author    = {Sedlacek, G. and Sch{\"a}tzke, C. and Geßler, M. and Schleser, Markus},
  title     = {F{\"u}gen von Bauteilen aus textilbewehrtem Beton},
  series = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  journal   = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  issn      = {0005-6650},
  pages     = {569 -- 575},
  year      = {2004},
  language  = {de}
}
@article{ZabirovSchleserBucherer2021,
  author    = {Zabirov, Alexander and Schleser, Markus and Bucherer, Sebastian},
  title     = {F{\"u}ge- und Dichtkonzept f{\"u}r einen Leichtbauverbrennungsmotor},
  series = {adh{\"a}sion KLEBEN \& DICHTEN},
  volume    = {65},
  journal   = {adh{\"a}sion KLEBEN \& DICHTEN},
  number    = {11},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {2192-8681},
  doi       = {10.1007/s35145-021-0531-5},
  pages     = {12 -- 19},
  year      = {2021},
  language  = {de}
}
@article{StarkeDrewsPoppen1996,
  author    = {Starke, G{\"u}nther and Drews, P. and Poppen, M.},
  title     = {Funktions{\"u}berwachung von Stromkontaktrohren beim MAG-Hochleistungsschweißen mittels K{\"o}rperschallinformationen},
  series = {Schweißen und Schneiden. 48 (1996), H. 9},
  journal   = {Schweißen und Schneiden. 48 (1996), H. 9},
  isbn      = {0036-7184},
  pages     = {675 -- 682},
  year      = {1996},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Funkstandards f{\"u}r Sensornetzwerke},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 63},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 12},
  publisher = {WEKA-Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {36 -- 41},
  year      = {2014},
  language  = {de}
}
@article{HuberStreblowMuelleretal.2014,
  author    = {Huber, M. and Streblow, R. and M{\"u}ller, D. and Lange, S. and Joneleit, R. and Sefker, T. and Rau, Sebastian and Wollert, J{\"o}rg},
  title     = {Funksignal{\"u}bertragung in Luftleitungen},
  series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Bd. 65},
  journal   = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {H. 7/8},
  issn      = {1436-5103},
  pages     = {36 -- 40},
  year      = {2014},
  language  = {de}
}
@article{WollertBuda2009,
  author    = {Wollert, J{\"o}rg and Buda, Aurel},
  title     = {Funkl{\"o}sungen im parallelen Betrieb},
  series = {Intelligenter produzieren : die Wissensplattform f{\"u}r das technische Management},
  journal   = {Intelligenter produzieren : die Wissensplattform f{\"u}r das technische Management},
  number    = {H. 4},
  publisher = {VDMA-Verl.},
  address   = {Frankfurt, M.},
  issn      = {1869-2745},
  pages     = {6 -- 8},
  year      = {2009},
  language  = {de}
}
@article{Wollert2009,
  author    = {Wollert, J{\"o}rg},
  title     = {Funk-Suche : Lokalisierung und Ortsbestimmungs-Verfahren f{\"u}r mobile Systeme},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {H. 2},
  publisher = {Weka Fachmedien GmbH},
  address   = {Haar},
  pages     = {24 -- 27},
  year      = {2009},
  language  = {de}
}
@article{Wollert2007,
  author    = {Wollert, J{\"o}rg},
  title     = {Funk f{\"u}r die Sicherheit auf vier R{\"a}dern : Chancen und Herausforderungen in der Fahrzeug-Umwelt-Kommunikation},
  series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  journal   = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {H. 8},
  issn      = {1614-0125},
  pages     = {78 -- 83},
  year      = {2007},
  language  = {de}
}
@article{StarkeCichon2004,
  author    = {Starke, G{\"u}nther and Cichon, Carsten},
  title     = {Fortgeschrittene Benutzeroberfl{\"a}che f{\"u}r eine neue Roboterkinematik in unstrukturierter Schweißumgebung},
  series = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.].},
  journal   = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.].},
  publisher = {Eysoldt},
  address   = {Aachen},
  isbn      = {3-938153-30-X},
  pages     = {373 -- 377},
  year      = {2004},
  language  = {de}
}
@article{Raatschen1987,
  author    = {Raatschen, Hans-J{\"u}rgen},
  title     = {Fokussierung von Spannungswellen in einer krummlinig berandeten Scheibe},
  series = {ZAMM : Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik},
  volume    = {67},
  journal   = {ZAMM : Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik},
  number    = {4},
  issn      = {1521-4001},
  pages     = {T230 -- T231},
  year      = {1987},
  language  = {de}
}
@article{HeptnerWollert2005,
  author    = {Heptner, K. and Wollert, J{\"o}rg},
  title     = {FML-Report - VDI-Richtlinie 4485 'E-Commerce und Logistik'},
  series = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  volume    = {19},
  journal   = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  issn      = {0930-7834},
  pages     = {58 -- 59},
  year      = {2005},
  language  = {de}
}
@article{DuesGebhardtKallweitetal.1994,
  author    = {Dues, M. and Gebhardt, Andreas and Kallweit, Stephan and Scheffler, T. and Siekmann, H. and Uchiyama, T.},
  title     = {Flow Visualization in a Cavitating Flow},
  series = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  journal   = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  publisher = {Kernforschungszentrum Karlsruhe},
  address   = {Karlsruhe},
  pages     = {391 -- 402},
  year      = {1994},
  language  = {en}
}
@article{EnningBernhardRake1992,
  author    = {Enning, Manfred and Bernhard, S. and Rake, H.},
  title     = {Flexibles Automatisierungssystem f{\"u}r eine Versuchsanlage zum Gießwalzen von Stahlband / Bernhard, S. ; Enning, M. ; Rake, H.},
  series = {Fachtagung Automatisierung, Inst. f{\"u}r Automatisierungstechnik, Band 6},
  journal   = {Fachtagung Automatisierung, Inst. f{\"u}r Automatisierungstechnik, Band 6},
  address   = {Dresden},
  pages     = {12 -- 20},
  year      = {1992},
  language  = {de}
}
@article{Enning2008,
  author    = {Enning, Manfred},
  title     = {FlexCargoRail - Ohne Diesel in die Letzte Meile},
  series = {Schienenverkehr - sicher, leise, effizient : InnoTrans, Berlin 2008 / Hrsg.: Bundesministerium f{\"u}r Wirtschaft und Technologie, Referat {\"O}ffentlichkeitsarbeit},
  journal   = {Schienenverkehr - sicher, leise, effizient : InnoTrans, Berlin 2008 / Hrsg.: Bundesministerium f{\"u}r Wirtschaft und Technologie, Referat {\"O}ffentlichkeitsarbeit},
  address   = {Berlin},
  pages     = {49 -- 52},
  year      = {2008},
  language  = {de}
}
@article{Enning2006,
  author    = {Enning, Manfred},
  title     = {Flexcargorail - ein Fahrzeugsystem f{\"u}r effizienten Einzelwagenverkehr / Baier, Martin ; Enning, Manfred},
  series = {Logistik Management. 8 (2006), H. 3},
  journal   = {Logistik Management. 8 (2006), H. 3},
  isbn      = {1436-6231},
  pages     = {28 -- 42},
  year      = {2006},
  language  = {de}
}
@article{Baatz1974,
  author    = {Baatz, Udo},
  title     = {Flaschenbehandlung bei hohen Leistungen - Problemstellung und L{\"o}sungsm{\"o}glichkeiten},
  series = {Das Erfrischungsgetr{\"a}nk - Mineralwasser-Zeitung},
  volume    = {27},
  journal   = {Das Erfrischungsgetr{\"a}nk - Mineralwasser-Zeitung},
  number    = {15},
  publisher = {Matthaes},
  address   = {Stuttgart},
  isbn      = {0342-2232},
  pages     = {1175 -- 1178},
  year      = {1974},
  language  = {de}
}
@article{Kaemper1994,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Fertigung von Mikroaktoren mittels LIGA-Technik. Lehr, H.; Abel, S.; Chritz, G.; Ehrfeld, W.; K{\"a}mper, K.-P.; Michel, F.},
  series = {Proceedings Microengineering 94 : Messe Stuttgart 17. - 19. Mai 1994 / Messe Stuttgart International},
  journal   = {Proceedings Microengineering 94 : Messe Stuttgart 17. - 19. Mai 1994 / Messe Stuttgart International},
  address   = {Stuttgart},
  pages     = {getr. Z{\"a}hlung},
  year      = {1994},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Feldbustechnologie},
  series = {Factory : der Durchblick in der Technik},
  journal   = {Factory : der Durchblick in der Technik},
  publisher = {WEKA-Industriemedien},
  address   = {Wien},
  pages     = {Publ. online},
  year      = {2014},
  language  = {de}
}
@article{AnikDagsoez1971,
  author    = {Anik, Sabri and Dagsoez, A. K.},
  title     = {Feinbleche schweißen : die Temperaturverteilung in d{\"u}nnen Stahlblechplatten beim Lichtbogenschweißen},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {63},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {9},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {57 -- 59},
  year      = {1971},
  language  = {de}
}
@article{KilicRaatschenKoerfgenetal.2017,
  author    = {Kilic, S. A. and Raatschen, Hans-J{\"u}rgen and K{\"o}rfgen, B. and Apaydin, N. M. and Astaneh-Asl, A.},
  title     = {FE Model of the Fatih Sultan Mehmet Suspension Bridge Using Thin Shell Finite Elements},
  series = {Arabian Journal for Science and Engineering},
  volume    = {42},
  journal   = {Arabian Journal for Science and Engineering},
  number    = {3},
  publisher = {Springer Nature},
  issn      = {2191-4281},
  doi       = {10.1007/s13369-016-2316-y},
  pages     = {1103 -- 1116},
  year      = {2017},
  abstract  = {This paper presents the results of an eigenvalue analysis of the Fatih Sultan Mehmet Bridge. A high-resolution finite element model was created directly from the available design documents. All physical properties of the structural components were included in detail, so no calibration to the measured data was necessary. The deck and towers were modeled with shell elements. A nonlinear static analysis was performed before the eigenvalue calculation. The calculated natural frequencies and corresponding mode shapes showed good agreement with the available measured ambient vibration data. The calculation of the effective modal mass showed that nine modes had single contributions higher than 5 \% of the total mass. They were in a frequency range up to 1.2 Hz. The comparison of the results for the torsional modes especially demonstrated the advantage of using thin shell finite elements over the beam modeling approach.},
  language  = {en}
}
@article{KallweitUchiyamaSiekmann1998,
  author    = {Kallweit, Stephan and Uchiyama, R. and Siekmann, H.},
  title     = {Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H.},
  series = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  journal   = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  isbn      = {1542-3034},
  pages     = {49 -- 59},
  year      = {1998},
  language  = {en}
}
@article{MautnerForsterKornhuberetal.2008,
  author    = {Mautner, Karin and Forster, Ralf and Kornhuber, Ralf and Sander, Oliver},
  title     = {Fast and Reliable Pricing of American Options with Local Volatility / Forster, Ralf ; Kornhuber, Ralf ; Mautner, Karin ; Sander, Oliver},
  series = {Domain Decomposition Methods in Science and Engineering XVII},
  journal   = {Domain Decomposition Methods in Science and Engineering XVII},
  isbn      = {978-3-540-75198-4},
  pages     = {383 -- 390},
  year      = {2008},
  language  = {en}
}
@article{EnningBaierDaniel2009,
  author    = {Enning, Manfred and Baier, M. and Daniel, A. F.},
  title     = {Fahrzeugtechnische Machbarkeitsstudie eines selbstangetriebenen G{\"u}terwagens f{\"u}r das System FlexCargoRail / Baier, M. ; Daniel, A. F. ; Enning, M.},
  series = {ZEVrail : Glasers Annalen ; Zeitschrift f{\"u}r das gesamte System Bahn. 133 (2009), H. 1-2},
  journal   = {ZEVrail : Glasers Annalen ; Zeitschrift f{\"u}r das gesamte System Bahn. 133 (2009), H. 1-2},
  publisher = {Siemens},
  address   = {Berlin},
  isbn      = {1618-8330},
  pages     = {52 -- 58},
  year      = {2009},
  language  = {de}
}
@article{KlockeJochimsen1996,
  author    = {Klocke, Martina and Jochimsen, P.},
  title     = {Fachhochschulen sind leistungsorientierte Partner der Wirtschaft / Jochimsen, P. ; Klocke, M.},
  series = {Zwischen Ostsee und Nordsee : Wirtschaft im Bezirk der IHK zu Kiel / hrsg. in Zu-sammenarbeit mit der Industrie- und Handelskammer zu Kiel. Red.: Wolf-R{\"u}diger Janzen. 3., v{\"o}llig neue Ausg.},
  journal   = {Zwischen Ostsee und Nordsee : Wirtschaft im Bezirk der IHK zu Kiel / hrsg. in Zu-sammenarbeit mit der Industrie- und Handelskammer zu Kiel. Red.: Wolf-R{\"u}diger Janzen. 3., v{\"o}llig neue Ausg.},
  publisher = {Verl. Kommunikation und Wirtschaft},
  address   = {Oldenburg},
  isbn      = {388363140X},
  pages     = {66 -- 69},
  year      = {1996},
  language  = {de}
}
@article{TroederBennerSpielvogeletal.1986,
  author    = {Troeder, Christoph and Benner, Joachim and Spielvogel, A. and Platt, Werner},
  title     = {Expertensystem w{\"a}hlt und dimensioniert drehelastische Kupplungen},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {78},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {1},
  publisher = {Binkert Medien},
  address   = {Laufenburg},
  issn      = {0040-1498},
  pages     = {92 -- 95},
  year      = {1986},
  language  = {de}
}
@article{WangAnikFrohberg1988,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {79},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {5},
  issn      = {0044-3093},
  pages     = {336 -- 339},
  year      = {1988},
  language  = {en}
}
@article{AnikFrohbergKapoor1983,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Experiments and theoretical considerations on the solution of oxygen in binary metal alloys},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {87},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {12},
  issn      = {0005-9021},
  pages     = {1201 -- 1204},
  year      = {1983},
  language  = {en}
}
@article{KaemperBergLehretal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Berg, U. and Lehr, H. and Ehrfeld, W.},
  title     = {Experimentelle Untersuchungen zur automatisierten Mikrolinsenmontage. Berg, U.; K{\"a}mper, K.-P.; Lehr, H.; Ehrfeld, W.},
  series = {Produktionstechnik f{\"u}r Mikrosysteme. IPA-Seminar, 5. und 6. November 1996, Stuttgart. Pro Mikro. Fraunhofer-Institut f{\"u}r Produktionstechnik und Automatisierung -IPA-, Stuttgart},
  journal   = {Produktionstechnik f{\"u}r Mikrosysteme. IPA-Seminar, 5. und 6. November 1996, Stuttgart. Pro Mikro. Fraunhofer-Institut f{\"u}r Produktionstechnik und Automatisierung -IPA-, Stuttgart},
  year      = {1996},
  language  = {de}
}
@article{SchmittBlankSchoenbrunn1983,
  author    = {Schmitt, Rolf W. and Blank, K. and Schoenbrunn, G.},
  title     = {Experimentelle Spannungsanalyse zum Doppelringverfahren},
  series = {Sprechsaal : internat. ceramics \& glass magazine. 116 (1983), H. 5},
  journal   = {Sprechsaal : internat. ceramics \& glass magazine. 116 (1983), H. 5},
  isbn      = {0341-0439},
  pages     = {397 -- 405},
  year      = {1983},
  language  = {de}
}
@article{FrohbergAnik1986,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Experimentelle Ergebnisse zum L{\"o}sungsverhalten von Sauerstoff in den Systemen Cu-O-Bi und Cu-O-Pb},
  series = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  volume    = {31},
  journal   = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  number    = {9},
  issn      = {0028-3207},
  pages     = {344 -- 347},
  year      = {1986},
  language  = {de}
}
@article{FateriGebhardtThuemmleretal.2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura},
  title     = {Experimental investigation on selective laser melting of glass},
  series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  volume    = {56 (2014)},
  journal   = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  doi       = {10.1016/j.phpro.2014.08.118},
  pages     = {357 -- 364},
  year      = {2014},
  language  = {en}
}
@article{FateriHoetterGebhardt2012,
  author    = {Fateri, Miranda and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas},
  title     = {Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting},
  series = {Physics Procedia},
  volume    = {39},
  journal   = {Physics Procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.062},
  pages     = {464 -- 470},
  year      = {2012},
  abstract  = {Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.},
  language  = {en}
}
@article{Wollert1995,
  author    = {Wollert, J{\"o}rg},
  title     = {Euros - 166 - Echtzeitentwicklungskit f{\"u}r den 80C166},
  series = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  journal   = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  number    = {H. 8},
  issn      = {0170-1827},
  pages     = {32 -- 34},
  year      = {1995},
  language  = {de}
}
@article{Wollert2000,
  author    = {Wollert, J{\"o}rg},
  title     = {Ethernet in der Automatisierungstechnik ; 2: Grenzen und M{\"o}glichkeiten des industriellen Ethernet-Einsatzes},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 49},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 21},
  issn      = {0013-5658},
  pages     = {66 -- 75},
  year      = {2000},
  language  = {de}
}
@article{Wollert2000,
  author    = {Wollert, J{\"o}rg},
  title     = {Ethernet in der Automatisierungstechnik ; 1: Herk{\"o}mmliche Feldbusse im Vergleich zu Ethernet},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 49},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 15},
  issn      = {0013-5658},
  pages     = {68 -- 77},
  year      = {2000},
  language  = {de}
}
@article{ReisgenSchleserHarmsetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Naumov, Andreas},
  title     = {Erweiterung des Parameterfelds zum R{\"u}hrreibschweißen mittels konduktiver Unterst{\"u}tzung},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 63},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 12},
  publisher = {DVS-Media GmbH},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {710 -- 714},
  year      = {2011},
  language  = {de}
}
@article{Baatz1972,
  author    = {Baatz, Udo},
  title     = {Erstellung von Einzelteilzeichnungen mittels graphischer Datenverarbeitungsanlagen},
  series = {Konstruktion},
  volume    = {24},
  journal   = {Konstruktion},
  number    = {9},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  isbn      = {0720-5953},
  pages     = {360 -- 369},
  year      = {1972},
  language  = {de}
}
@article{ThomasWassenberg2014,
  author    = {Thomas, Axel and Wassenberg, Gerd},
  title     = {Erfolgreich sein im Kampf um die besten Talente : Employer Branding},
  series = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen},
  journal   = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen},
  publisher = {IHK Aachen},
  address   = {Aachen},
  year      = {2014},
  language  = {de}
}
@article{GrundmannKramer1995,
  author    = {Grundmann, Reinhard and Kramer, Carl},
  title     = {Entwurfskriterien f{\"u}r Aeroakustik-Windkan{\"a}le und M{\"o}glichkeiten zur Nachr{\"u}stung bestehender Windkan{\"a}le \&\#61607; Entwurfskriterien f{\"u}r Aeroakustik-Windkan{\"a}le und M{\"o}glichkeiten zur Nachr{\"u}stung bestehender Windkan{\"a}le},
  series = {Akustik und Aerodynamik des Kraftfahrzeuges : Grundlagen - Optimierungsmethoden - Meß- und Versuchstechnik ; mit 11 Tabellen und 243 Literaturstellen ; [Beitr{\"a}ge der Tagung 'Akustik und Aerodynamik des Kraftfahrzeuges' ... am 1. und 2. Februar 1994] / Sye},
  journal   = {Akustik und Aerodynamik des Kraftfahrzeuges : Grundlagen - Optimierungsmethoden - Meß- und Versuchstechnik ; mit 11 Tabellen und 243 Literaturstellen ; [Beitr{\"a}ge der Tagung 'Akustik und Aerodynamik des Kraftfahrzeuges' ... am 1. und 2. Februar 1994] / Sye},
  publisher = {Expert-Verl.},
  address   = {Renningen-Malmsheim},
  isbn      = {3-8169-1190-0},
  pages     = {377 -- 394},
  year      = {1995},
  language  = {de}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Entwicklungstendenzen und neue Systeme im Rapid Prototyping},
  series = {Industrie Management. 17 (2001), H. 3},
  journal   = {Industrie Management. 17 (2001), H. 3},
  isbn      = {1434-1980},
  pages     = {42 -- 46},
  year      = {2001},
  language  = {de}
}
@article{Klocke1992,
  author    = {Klocke, Martina},
  title     = {Entwicklung von modularen Lerneinheiten in der CIM-orientierten Lernfabrik},
  series = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]},
  journal   = {CIM, Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben : [Bericht {\"u}ber den EUROTECNET-Workshop "CIM - Bedeutung f{\"u}r die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke]},
  publisher = {EUROTECNET},
  address   = {Br{\"u}ssel},
  pages     = {49 -- 60},
  year      = {1992},
  language  = {de}
}
@article{KaemperLehrEhrfeldetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Ehrfeld, W. and Hagemann, B.},
  title     = {Entwicklung von Mikroantrieben am Institut f{\"u}r Mikrotechnik Mainz. Lehr, H.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Th{\"u}rigen, C.},
  series = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  journal   = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091269-3},
  pages     = {77},
  year      = {1996},
  language  = {de}
}
@article{KaemperBergWolfetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Berg, U. and Wolf, A. and Lehr, H.},
  title     = {Entwicklung von Linsenhaltern f{\"u}r ein SMIF-kompatibles Magazinsystem und deren Fertigung durch Mikrospritzguß. Berg, U.; K{\"a}mper, K.-P.; Wolf, A.; Lehr, H.; Ehrfeld, W.},
  series = {Produktionstechnik f{\"u}r Mikrosysteme. IPA-Seminar, 5. und 6. November 1996, Stuttgart. Pro Mikro. Fraunhofer-Institut f{\"u}r Produktionstechnik und Automatisierung -IPA-, Stuttgart},
  journal   = {Produktionstechnik f{\"u}r Mikrosysteme. IPA-Seminar, 5. und 6. November 1996, Stuttgart. Pro Mikro. Fraunhofer-Institut f{\"u}r Produktionstechnik und Automatisierung -IPA-, Stuttgart},
  year      = {1996},
  language  = {de}
}
@article{KaemperLehrAbeletal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Abel, S. and Ehrfeld, W.},
  title     = {Entwicklung von elektromagnetischen Mikroaktoren. Lehr, H.; Abel, S.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Th{\"u}rigen, C.},
  series = {41. Internationales Wissenschaftliches Kolloquium, Wandel im Maschinenbau durch Feinwerktechik und Mikrosystemtechnik, Bd. 1, Ilmenau, DE, 23.-26. Sep, 1996},
  journal   = {41. Internationales Wissenschaftliches Kolloquium, Wandel im Maschinenbau durch Feinwerktechik und Mikrosystemtechnik, Bd. 1, Ilmenau, DE, 23.-26. Sep, 1996},
  pages     = {158 -- 163},
  year      = {1996},
  language  = {de}
}
@article{PfeifferGauchel1997,
  author    = {Pfeiffer, Johann and Gauchel, Joachim},
  title     = {Entwicklung und Simulation von Mechanismen zu Automatisierungszwecken / Joachim Gauchel ; Johann Pfeiffer},
  series = {CAE Techniques : [proceedings of the 3st International Scientific Colloquium, Rzesz{\´o}w University of Technology, Poland, September 24-27, 1997] / ed. by Kazimierz E. Oczoś},
  journal   = {CAE Techniques : [proceedings of the 3st International Scientific Colloquium, Rzesz{\´o}w University of Technology, Poland, September 24-27, 1997] / ed. by Kazimierz E. Oczoś},
  publisher = {Politechnika Rzeszowska},
  address   = {Rzesz{\´o}w},
  isbn      = {83-7199-004-9},
  pages     = {425 ff},
  year      = {1997},
  language  = {de}
}
@article{FeldmannPakGessleretal.2008,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Schleser, Markus},
  title     = {Entwicklung eines Bemessungsmodells f{\"u}r punktf{\"o}rmige Verbindungen textibewehrter Betonbauteile},
  series = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  volume    = {Bd. 85},
  journal   = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  number    = {2},
  issn      = {0005-6820, 0341-1052, 0932-6359, 0932-8351, 0932-8351},
  pages     = {143 -- 147},
  year      = {2008},
  language  = {de}
}
@article{StarkePoppen1997,
  author    = {Starke, G{\"u}nther and Poppen, P.},
  title     = {Entwicklung einer modularen Steuerung zum automatisierten, sensorgest{\"u}tzten MAG-Hochleistungsschweißen},
  series = {Schweißen und Schneiden. 49 (1997), H. 3},
  journal   = {Schweißen und Schneiden. 49 (1997), H. 3},
  isbn      = {0036-7184},
  pages     = {149 -- 157},
  year      = {1997},
  language  = {de}
}
@article{Klocke1988,
  author    = {Klocke, Martina},
  title     = {Entwicklung der Feinbearbeitung am Institut f{\"u}r Werkzeugmaschinen und Fertigungstechnik der Technischen Universit{\"a}t Berlin / Klocke, M.; Klocke, F. ; Stark, C.},
  series = {Zeitschrift f{\"u}r wirtschaftliche Fertigung: ZwF. 83 (1988), H. 10},
  journal   = {Zeitschrift f{\"u}r wirtschaftliche Fertigung: ZwF. 83 (1988), H. 10},
  isbn      = {0044-3743},
  pages     = {521 -- 529},
  year      = {1988},
  language  = {de}
}
@article{EngelnMuellges1982,
  author    = {Engeln-M{\"u}llges, Gisela},
  title     = {Entartungsbedingungen f{\"u}r Gleitfl{\"a}chennomogramme und Nomographierbarkeitsbedingungen f{\"u}r Fluchtebenennomogramme},
  series = {ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik},
  volume    = {62},
  journal   = {ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik},
  number    = {2},
  issn      = {1521-4001},
  doi       = {10.1002/zamm.19820620203},
  pages     = {77 -- 93},
  year      = {1982},
  language  = {de}
}
@article{PfaffSchmidtPinders2015,
  author    = {Pfaff, Raphael and Schmidt, Bernd and Pinders, Udo},
  title     = {Energieeffizienz steigern durch Rekuperationseinrichtungen},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {5},
  publisher = {Eisenbahn-Fachverlag},
  address   = {Mainz},
  issn      = {0172-4479},
  pages     = {50 -- 53},
  year      = {2015},
  language  = {de}
}
@article{EnningBaier2009,
  author    = {Enning, Manfred and Baier, M.},
  title     = {Energetic and operational use of FlexCargoRail freight wagons in the single wagon load traffic / Baier, M. ; Enning, M.},
  series = {Towards zero emission : EVS 24, the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium \& Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert St{\"u}ssi [Hrsg.]},
  journal   = {Towards zero emission : EVS 24, the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium \& Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert St{\"u}ssi [Hrsg.]},
  address   = {Stavanger},
  pages     = {CD-Rom},
  year      = {2009},
  language  = {en}
}
@article{ReisgenSchleserHarmsetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Thiele, Regina},
  title     = {Elektromobilit{\"a}t - Herausforderungen an die F{\"u}getechnik},
  series = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t},
  volume    = {Jg. 1},
  journal   = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t},
  number    = {Nr. 2},
  editor    = {Kampker, Achim},
  pages     = {16 -- 17},
  year      = {2011},
  language  = {de}
}
@article{KaemperEhrfeldHagemannetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Ehrfeld, W. and Hagemann, B. and Lehr, H.},
  title     = {Electromagnetic permanent magnet micromotor with integrated micro gear box. K{\"a}mper, K.-P.; Ehrfeld, W.; Hagemann, B.; Lehr, H.; Michel, F.; Schirling, A.; Th{\"u}rigen, C.; Wittig, T.},
  series = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  journal   = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  address   = {Bremen},
  pages     = {429},
  year      = {1996},
  language  = {en}
}
@article{Enning2008,
  author    = {Enning, Manfred},
  title     = {Einzelwagenkonzept f{\"u}r die letzte Meile : „FlexCargoRail" sieht autarke Fahrten von Waggons mit Rangiergeschwindigkeit vor. Massive Effizienzgewinne locken},
  series = {Deutsche Verkehrs-Zeitung : DVZ / Logistik auf der Schiene (2008)},
  journal   = {Deutsche Verkehrs-Zeitung : DVZ / Logistik auf der Schiene (2008)},
  isbn      = {0342-166X},
  year      = {2008},
  language  = {de}
}
@article{Starke1988,
  author    = {Starke, G{\"u}nther},
  title     = {Einsatzmoeglichkeiten des Roboterschweissens im Behaelterbau},
  series = {DVS-Berichte. 115 (1988)},
  journal   = {DVS-Berichte. 115 (1988)},
  isbn      = {0418-9639},
  pages     = {38 -- 43},
  year      = {1988},
  language  = {de}
}
@article{WollertVedral2002,
  author    = {Wollert, J{\"o}rg and Vedral, Andreas},
  title     = {Einsatz von Open-Source-Software f{\"u}r Bluetooth-Evaluationsprototypen : Anwendungsempfehlungen und Einsatzbeispiele},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 22},
  issn      = {0013-5658},
  pages     = {70 -- 73},
  year      = {2002},
  language  = {de}
}
@article{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Einsatz von offenen Onlinekursen in der Eisenbahnlehre},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {1},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {12 -- 16},
  year      = {2017},
  abstract  = {Eigene positive Erfahrungen mit Onlinekursen sowie die geringen Studierendenzahlen in der Pr{\"a}senzlehre gaben den Anstoß zu einem Experiment mit einem offenen Onlinekurs auf der Plattform Udemy. Die Erfahrungen sowohl bei der Erstellung und als auch im Lehrbetrieb waren positiv und f{\"u}hrten zu einer neuen Besch{\"a}ftigung mit Inhalten und Lernenden, getrieben durch die Anforderungen der Lernplattform.},
  language  = {de}
}
@article{KallweitDuesMuelleretal.2007,
  author    = {Kallweit, Stephan and Dues, Michael and M{\"u}ller, Ulli and Lederer, Thomas},
  title     = {Einsatz der Particle Image Velocimetry zur Untersuchung von Rohrstr{\"o}mungen / Kallweit, Stephan ; Dues, Michael ; M{\"u}ller, Ulli ; Lederer, Thomas ; Schroll, Michael ; Willert, Christian},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  isbn      = {978-3-86009-007-7},
  pages     = {35},
  year      = {2007},
  language  = {de}
}
@article{KaemperHagemannEhrfeldetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Hagemann, B. and Ehrfeld, W. and Lehr, H.},
  title     = {Einsatz der Finite-Elemente-Methode f{\"u}r die Entwicklung von Permanentmagnet-Mikromotoren. Hagemann, B.; Ehrfeld, W.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.; Th{\"u}rigen, C.},
  series = {Tagungsband : 3. Workshop Methoden- und Werkzeuge zum Entwurf von Mikrosystemen mit dem Schwerpunkt Methoden zum Entwurf, zur Integration und Parametrisierung von Komponenten f{\"u}r Applikationsspezifische Integrierte Mikrosysteme : 27. und 28. Juni 1996, VDE-Haus Frankfurt a. M.},
  journal   = {Tagungsband : 3. Workshop Methoden- und Werkzeuge zum Entwurf von Mikrosystemen mit dem Schwerpunkt Methoden zum Entwurf, zur Integration und Parametrisierung von Komponenten f{\"u}r Applikationsspezifische Integrierte Mikrosysteme : 27. und 28. Juni 1996, VDE-Haus Frankfurt a. M.},
  publisher = {C-LAB/Analoge Systemtechnik, 1996},
  address   = {Paderborn},
  pages     = {225 S. : graph. Darst.},
  year      = {1996},
  language  = {de}
}
@article{GrundmannKramer1991,
  author    = {Grundmann, Reinhard and Kramer, Carl},
  title     = {Einheitliche Darstellung von Str{\"o}mungsger{\"a}uschen. Beschreibung der Schalleistung und Darstellung einiger Str{\"o}mungsger{\"a}usche. 1. Teil.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 3},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 3},
  isbn      = {0017-9906},
  pages     = {233 -- 238},
  year      = {1991},
  language  = {de}
}
@article{GrundmannKramer1991,
  author    = {Grundmann, Reinhard and Kramer, Carl},
  title     = {Einheitliche Darstellung von Str{\"o}mungsger{\"a}uschen. Beschreibung der Schalleistung und Darstellung einiger Str{\"o}mungsger{\"a}usche - 2. Teil.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 4},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 4},
  isbn      = {0017-9906},
  pages     = {275 -- 281},
  year      = {1991},
  language  = {de}
}
@article{AnikTopuzTuncel1992,
  author    = {Anik, Sabri and Topuz, A. and Tuncel, H. S.},
  title     = {Einfluß der Parameter beim Diffusionsschweißen der St{\"a}hle X210Cr12 mit 25 CrMo4 auf die Ausbildung der Bindezone},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {44},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {2},
  issn      = {0036},
  pages     = {97 -- 100},
  year      = {1992},
  language  = {de}
}
@article{AnikTopuzTuncel1991,
  author    = {Anik, Sabri and Topuz, A. and Tuncel, H. S.},
  title     = {Einfluß der Parameter beim Diffusionsschweißen der St{\"a}hle X 210 Cr 12 und 25 MoCr 4 auf ihre mechanischen Eigenschaften},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {43},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {6},
  issn      = {0036-7184},
  pages     = {341 -- 344},
  year      = {1991},
  language  = {de}
}
@article{PeekenAbdelLatifBenner1985,
  author    = {Peeken, Heinz and Abdel-Latif, Lotfie Ahmed and Benner, Joachim},
  title     = {Einfluss der {\"O}lversch{\"a}umung auf Axiallager mit Kreis- und Michell-Segmenten},
  series = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  volume    = {127},
  journal   = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  number    = {5},
  publisher = {Springer-VDI-Verl},
  address   = {D{\"u}sseldorf},
  issn      = {0042-1766},
  pages     = {145 -- 151},
  year      = {1985},
  language  = {de}
}
@article{Starke1982,
  author    = {Starke, G{\"u}nther},
  title     = {Ein Steuerungskonzept zum automatischen Lichtbogenschweissen},
  series = {DVS-Berichte. 73 (1982)},
  journal   = {DVS-Berichte. 73 (1982)},
  isbn      = {0418-9639},
  pages     = {109 -- 114},
  year      = {1982},
  language  = {de}
}
@article{HeinrichsWeck1981,
  author    = {Heinrichs, Horst and Weck, H.},
  title     = {Efficient finite-element structural analysis by interactive graphic mesh generation},
  series = {CIRP Annals. 30 (1981), H. 1},
  journal   = {CIRP Annals. 30 (1981), H. 1},
  pages     = {279 -- 284},
  year      = {1981},
  language  = {en}
}
@article{KaemperSchmittGuentherodt1987,
  author    = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Effect of adsorbates on the spin-polarized photoemission of itinerant ferromagnets. Schmitt, W.; K{\"a}mper, K.-P.; G{\"u}ntherodt, G.},
  series = {Physical Review B. 36 (1987), H. 7},
  journal   = {Physical Review B. 36 (1987), H. 7},
  isbn      = {1095-3795},
  pages     = {3763 -- 3768},
  year      = {1987},
  language  = {en}
}
@article{Kaemper2003,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Education and Training in MST. K{\"a}mper, K.-P.; Picard, A.; Brill, M.; Cassel, D.; Jentsch, A.; Merten, S.; Rollwa, M.},
  series = {Mst-News (2003)},
  journal   = {Mst-News (2003)},
  isbn      = {0948-3128},
  pages     = {35},
  year      = {2003},
  language  = {en}
}
@article{EnningSchlosserRakeetal.1998,
  author    = {Enning, Manfred and Schlosser, A. and Rake, H. and Hild, O.},
  title     = {Echtzeitf{\"a}hige Simulation eines direkteinspritzenden Dieselmotors / Schlosser, A. ; Rake, H. ; Hild, O. ; Kr{\"u}ger, M. ; Pischinger, S.},
  series = {Simulationstechnik : 12. Symposium in Z{\"u}rich, September 1998 ; Tagungsband / [Veranstalter: ASIM-Fachausschuss 4.5 Simulation, Gesellschaft f{\"u}r Informatik ...]. Hrsg. von Max Engeli},
  journal   = {Simulationstechnik : 12. Symposium in Z{\"u}rich, September 1998 ; Tagungsband / [Veranstalter: ASIM-Fachausschuss 4.5 Simulation, Gesellschaft f{\"u}r Informatik ...]. Hrsg. von Max Engeli},
  publisher = {vdf, Hochsch.-Verl. an der ETH},
  address   = {Z{\"u}rich},
  isbn      = {3728126535},
  pages     = {219 -- 226},
  year      = {1998},
  language  = {de}
}
@article{Wollert2018,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet - Basis f{\"u}r Industrie 4.0},
  series = {Design \& Elektronik},
  journal   = {Design \& Elektronik},
  publisher = {WEKA-Fachmedien},
  address   = {M{\"u}nchen},
  isbn      = {0933-8667},
  year      = {2018},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet mit Standardtechnik},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Embedded : Fachmagazin f{\"u}r die Entwicklung von Embedded-Systemen},
  volume    = {Bd. 63},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Embedded : Fachmagazin f{\"u}r die Entwicklung von Embedded-Systemen},
  number    = {H. 12},
  publisher = {WEKA-Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {28 -- 32},
  year      = {2014},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet : Protokoll-Reigen},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 63},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 26},
  publisher = {WEKA-Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {24 -- 31},
  year      = {2014},
  language  = {de}
}
@article{Wollert2015,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet : Protokoll-Reigen},
  series = {elektroniknet.de},
  journal   = {elektroniknet.de},
  year      = {2015},
  language  = {de}
}
@article{Wollert2017,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet - Basis f{\"u}r Industrie 4.0},
  series = {Design \& Elektronik},
  journal   = {Design \& Elektronik},
  number    = {12},
  publisher = {WEKA-Fachmedien},
  address   = {Haar, M{\"u}nchen},
  issn      = {0933-8667},
  pages     = {38 -- 41},
  year      = {2017},
  language  = {de}
}
@article{WittBogner1990,
  author    = {Witt, Klaus and Bogner, D.},
  title     = {Druckmessung mit zukunftsorientierten Perspektiven},
  series = {Sensor Report. 5 (1990), H. 1},
  journal   = {Sensor Report. 5 (1990), H. 1},
  isbn      = {0179-9592},
  pages     = {8 -- 14},
  year      = {1990},
  language  = {de}
}
@article{Wollert2003,
  author    = {Wollert, J{\"o}rg},
  title     = {Dot net und Sun ONE - Wettbewerb oder Mitspieler? Neue Programmiermodelle machen das Web interaktiv},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 52},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 19},
  issn      = {0013-5658},
  pages     = {72 -- 81},
  year      = {2003},
  language  = {de}
}
@article{Wollert1997,
  author    = {Wollert, J{\"o}rg},
  title     = {Doping f{\"u}r den Betriebssystem-Kern : Echtzeit-L{\"o}sungen f{\"u}r Windows NT im Vergleich},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 46},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 20},
  issn      = {0013-5658},
  pages     = {46 -- 50},
  year      = {1997},
  language  = {de}
}
@article{DiltheyBrandenburgSchleser2004,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Dispensing and application of unfilled adhesives in the micro range},
  series = {Welding and cutting. 3 (2004), H. 4},
  journal   = {Welding and cutting. 3 (2004), H. 4},
  issn      = {1612-3433},
  pages     = {250 -- 254},
  year      = {2004},
  language  = {en}
}
@article{Thomas2019,
  author    = {Thomas, Axel},
  title     = {Die Wiederbelebung der Mitarbeiterwohnungsidee bei kommunalen Unternehmen},
  series = {VM Verwaltung und Management},
  volume    = {25},
  journal   = {VM Verwaltung und Management},
  number    = {6},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  issn      = {0947-9856},
  doi       = {10.5771/0947-9856-2019-6-286},
  pages     = {286 -- 291},
  year      = {2019},
  language  = {de}
}
@article{FrohbergAnik1984,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Die Vorausbestimmung der Stickstoffl{\"o}slichkeit in bin{\"a}ren Eisenschmelzen},
  series = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen : Fachberichte},
  volume    = {55},
  journal   = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen : Fachberichte},
  number    = {8},
  issn      = {0003-8962},
  pages     = {365 -- 367},
  year      = {1984},
  language  = {de}
}
@article{Klocke1995,
  author    = {Klocke, Martina},
  title     = {Die Situation von Ingenieurinnen in Europa - ein L{\"a}ndervergleich},
  series = {Neue Impulse (1995)},
  journal   = {Neue Impulse (1995)},
  isbn      = {0943-4240},
  pages     = {7 -- 16},
  year      = {1995},
  language  = {de}
}
@article{Klocke1996,
  author    = {Klocke, Martina},
  title     = {Die Situation von Ingenieurinnen in Europa - ein L{\"a}ndervergleich},
  series = {Berufsziel: Ingenieurin : Aufbruch in die/der Technik / hrsg. von Renate Kosuch},
  journal   = {Berufsziel: Ingenieurin : Aufbruch in die/der Technik / hrsg. von Renate Kosuch},
  publisher = {Deutscher Studien-Verl.},
  address   = {Weinheim},
  isbn      = {3-89271-645-5},
  pages     = {26 -- 38},
  year      = {1996},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Die Produktionslogistik der Front- und Heckmodule f{\"u}r die Smart-Montage in Hambach},
  series = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  journal   = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  issn      = {0930-7834},
  pages     = {48 -- 51},
  year      = {1998},
  language  = {de}
}
@article{Wollert2005,
  author    = {Wollert, J{\"o}rg},
  title     = {Die n{\"a}chste "Generation Wireless" : Kommunikation mit hoher Bandbreite wird mobil},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {H. 2},
  issn      = {0013-5658 ; 1611-5120},
  pages     = {40 -- 44},
  year      = {2005},
  language  = {de}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {Die nachhaltige Alternative zum autonomen Lastwagen},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {10},
  pages     = {22 -- 26},
  year      = {2017},
  language  = {de}
}
@article{Kaemper2002,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Die Mikroaktorik wird erwachsen},
  series = {INNO : innovative Technik - neue Anwendungen / Hrsg.: IVAM Fachverband f{\"u}r Mikrotechnik, Dortmund. Ausgabe 22 (2002)},
  journal   = {INNO : innovative Technik - neue Anwendungen / Hrsg.: IVAM Fachverband f{\"u}r Mikrotechnik, Dortmund. Ausgabe 22 (2002)},
  pages     = {4 -- 5},
  year      = {2002},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Die Kunst des Weglassens : Windows NT Embedded - Was die neue Version vom Standard-NT unterscheidet},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 48},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 23},
  issn      = {0013-5658},
  pages     = {116 -- 121},
  year      = {1999},
  language  = {de}
}
@article{WollertKruseVedral2007,
  author    = {Wollert, J{\"o}rg and Kruse, Thomas and Vedral, Andreas},
  title     = {Die Kraft der drei Antennen : zuverl{\"a}ssige Funkkommunikation f{\"u}r die Automatisierungstechnik},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  volume    = {56},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {Sonderh. 2},
  issn      = {0013-5658; 1611-5120},
  pages     = {36 -- 42},
  year      = {2007},
  language  = {de}
}
@article{PlessmannWollertFiedler1995,
  author    = {Pleßmann, K. W. and Wollert, J{\"o}rg and Fiedler, J{\"o}rg},
  title     = {Die ganzheitliche und objektorientierte Prozesssteuerung - eine Vision?},
  series = {CIM-Management : Produkte, Strategien, Entscheidungshilfen},
  volume    = {11},
  journal   = {CIM-Management : Produkte, Strategien, Entscheidungshilfen},
  number    = {2},
  issn      = {0179-2679},
  pages     = {56 -- 60},
  year      = {1995},
  language  = {de}
}
@article{KaemperPicardSchuetze2005,
  author    = {K{\"a}mper, Klaus-Peter and Picard, A. and Sch{\"u}tze, A.},
  title     = {Die Ausbildungsfoundry pro-mst und das virtuelle Technologielabor: Ein Konzept f{\"u}r eine exzellente praktische MST-Ausbildung in einem modernen Reinraum zu niedrigen Gesamtkosten. Picard, A.; K{\"a}mper, K.-P.; Sch{\"u}tze, A.},
  series = {Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium f{\"u}r Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle},
  journal   = {Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium f{\"u}r Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {3-8007-2926-1},
  pages     = {127},
  year      = {2005},
  language  = {de}
}
@article{KaemperLehrEhrfeldetal.1997,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Ehrfeld, W. and Hagemann, B.},
  title     = {Development of micro and millimotors. Lehr, H.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Schulz, C.; Th{\"u}rigen C.},
  series = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)},
  journal   = {Minimally Invasive Therapy and Allied Technologies. 6 (1997)},
  isbn      = {1364-5706},
  year      = {1997},
  language  = {en}
}
@article{Kaemper1996,
  author    = {K{\"a}mper, Klaus-Peter},
  title     = {Development of low-cost injection moulded micropumps. Entwicklung von kosteng{\"u}nstigen, mittels Spritzguß hergestellten Mikropumpen / D{\"o}pper, J. (u.a.)},
  series = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  journal   = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH},
  address   = {Bremen},
  pages     = {37 -- 40},
  year      = {1996},
  language  = {en}
}
@article{StarkeDrews1985,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Development approaches for advanced control in automated arc welding},
  pages     = {115 -- 124},
  year      = {1985},
  language  = {en}
}
@article{EnningJenayehMuelleretal.1997,
  author    = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Rake, Heinrich},
  title     = {Development and realization of a manipulator for automatic decoupling of freight cars in marshalling yards / Jenayeh, I. ; M{\"u}ller, C. ; Enning, Manfred ; Rake, Heinrich ; Peter, J.},
  year      = {1997},
  language  = {en}
}
@article{FrankoDuKallweitetal.2020,
  author    = {Franko, Josef and Du, Shengzhi and Kallweit, Stephan and Duelberg, Enno Sebastian and Engemann, Heiko},
  title     = {Design of a Multi-Robot System for Wind Turbine Maintenance},
  series = {Energies},
  volume    = {13},
  journal   = {Energies},
  number    = {10},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en13102552},
  pages     = {Article 2552},
  year      = {2020},
  abstract  = {The maintenance of wind turbines is of growing importance considering the transition to renewable energy. This paper presents a multi-robot-approach for automated wind turbine maintenance including a novel climbing robot. Currently, wind turbine maintenance remains a manual task, which is monotonous, dangerous, and also physically demanding due to the large scale of wind turbines. Technical climbers are required to work at significant heights, even in bad weather conditions. Furthermore, a skilled labor force with sufficient knowledge in repairing fiber composite material is rare. Autonomous mobile systems enable the digitization of the maintenance process. They can be designed for weather-independent operations. This work contributes to the development and experimental validation of a maintenance system consisting of multiple robotic platforms for a variety of tasks, such as wind turbine tower and rotor blade service. In this work, multicopters with vision and LiDAR sensors for global inspection are used to guide slower climbing robots. Light-weight magnetic climbers with surface contact were used to analyze structure parts with non-destructive inspection methods and to locally repair smaller defects. Localization was enabled by adapting odometry for conical-shaped surfaces considering additional navigation sensors. Magnets were suitable for steel towers to clamp onto the surface. A friction-based climbing ring robot (SMART— Scanning, Monitoring, Analyzing, Repair and Transportation) completed the set-up for higher payload. The maintenance period could be extended by using weather-proofed maintenance robots. The multi-robot-system was running the Robot Operating System (ROS). Additionally, first steps towards machine learning would enable maintenance staff to use pattern classification for fault diagnosis in order to operate safely from the ground in the future.},
  language  = {en}
}
@article{Grundmann1992,
  author    = {Grundmann, Reinhard},
  title     = {Design Criteria for Aeroacoustic Wind Tunnels},
  year      = {1992},
  language  = {en}
}
@article{Knepper1985,
  author    = {Knepper, Ludger},
  title     = {Der moderne Luftfrachtverkehr - leistungsfaehig durch seine bodengebundenen Umschlagssysteme},
  pages     = {60 -- 69},
  year      = {1985},
  language  = {de}
}