@article{AkimbekovDigelTastambeketal.2021, author = {Akimbekov, Nuraly S. and Digel, Ilya and Tastambek, Kuanysh T. and Sherelkhan, Dinara K. and Jussupova, Dariya B. and Altynbay, Nazym P.}, title = {Low-rank coal as a source of humic substances for soil amendment and fertility management}, series = {Agriculture}, volume = {11}, journal = {Agriculture}, number = {12}, publisher = {MDPI}, address = {Basel}, issn = {2077-0472}, doi = {10.3390/agriculture11121261}, pages = {25 Seiten}, year = {2021}, abstract = {Humic substances (HS), as important environmental components, are essential to soil health and agricultural sustainability. The usage of low-rank coal (LRC) for energy generation has declined considerably due to the growing popularity of renewable energy sources and gas. However, their potential as soil amendment aimed to maintain soil quality and productivity deserves more recognition. LRC, a highly heterogeneous material in nature, contains large quantities of HS and may effectively help to restore the physicochemical, biological, and ecological functionality of soil. Multiple emerging studies support the view that LRC and its derivatives can positively impact the soil microclimate, nutrient status, and organic matter turnover. Moreover, the phytotoxic effects of some pollutants can be reduced by subsequent LRC application. Broad geographical availability, relatively low cost, and good technical applicability of LRC offer the advantage of easy fulfilling soil amendment and conditioner requirements worldwide. This review analyzes and emphasizes the potential of LRC and its numerous forms/combinations for soil amelioration and crop production. A great benefit would be a systematic investment strategy implicating safe utilization and long-term application of LRC for sustainable agricultural production.}, language = {en} } @article{Kleefeld2021, author = {Kleefeld, Andreas}, title = {The hot spots conjecture can be false: some numerical examples}, series = {Advances in Computational Mathematics}, volume = {47}, journal = {Advances in Computational Mathematics}, publisher = {Springer}, address = {Dordrecht}, issn = {1019-7168}, doi = {10.1007/s10444-021-09911-5}, year = {2021}, abstract = {The hot spots conjecture is only known to be true for special geometries. This paper shows numerically that the hot spots conjecture can fail to be true for easy to construct bounded domains with one hole. The underlying eigenvalue problem for the Laplace equation with Neumann boundary condition is solved with boundary integral equations yielding a non-linear eigenvalue problem. Its discretization via the boundary element collocation method in combination with the algorithm by Beyn yields highly accurate results both for the first non-zero eigenvalue and its corresponding eigenfunction which is due to superconvergence. Additionally, it can be shown numerically that the ratio between the maximal/minimal value inside the domain and its maximal/minimal value on the boundary can be larger than 1 + 10- 3. Finally, numerical examples for easy to construct domains with up to five holes are provided which fail the hot spots conjecture as well.}, language = {en} } @misc{MayntzKeimerTegtmeyeretal.2021, author = {Mayntz, Joscha and Keimer, Jona and Tegtmeyer, Philipp and Dahmann, Peter and Hille, Sebastian and Stumpf, Eike and Fisher, Alex and Dorrington, Graham}, title = {Aerodynamic Investigation on Efficient Inflight Transition of a Propeller from Propulsion to Regeneration Mode}, series = {AIAA SCITECH 2022 Forum}, journal = {AIAA SCITECH 2022 Forum}, publisher = {AIAA}, address = {Reston, Va.}, doi = {10.2514/6.2022-0546}, year = {2021}, abstract = {This paper discusses a new way of inflight power regeneration for electric or hybrid-electric driven general aviation aircraft with one powertrain for both configurations. Three different approaches for the shift from propulsion to regeneration mode are analyzed. Numerical cal-culation and wind tunnel results are compared and show the highest regeneration potential for the "Windmill" approach, where the propeller blades are flipped, and rotation is reversed. A combination of all regeneration approaches for a realistic flight mission is discussed.}, language = {en} } @masterthesis{Schoenlau2021, type = {Bachelor Thesis}, author = {Sch{\"o}nlau, Jennifer}, title = {Deutsche in der T{\"u}rkei: Wenn Deutsche in die T{\"u}rkei auswandern}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {122 Seiten}, year = {2021}, abstract = {Warum wandern immer mehr Deutsche in die T{\"u}rkei aus, obwohl wir denken, dass es uns in Deutschland gut geht? Haben deutsche Auswanderer in der T{\"u}rkei ein besseres Leben? Diese und weitere Fragen wurden in diesem Projekt genauer beleuchtet. Die Beweggr{\"u}nde der Menschen sind so unterschiedlich wie das Leben selbst. Diese Bachelorarbeit beinhaltet Interviews von fr{\"u}her in Deutschland lebenden Personen, die in die T{\"u}rkei ausgewandert sind und mit ihnen ihre ganz pers{\"o}nliche Geschichte. Zusammen mit diesem Thema wurde untersucht, wie das aktuelle Leben der Protagonisten in der T{\"u}rkei ist: soziales Umfeld, das Einleben in eine neue Kultur und die Lebensqualit{\"a}t. Ein pers{\"o}nliches und intimes Interview lag hier besonders im Fokus. Die Arbeit wird mit Fotografien unterst{\"u}tzt, die den Alltag Deutscher in der T{\"u}rkei zeigen. Mit diesem Projekt werden Vorurteile {\"u}ber die T{\"u}rkei und die dort lebenden Menschen best{\"a}tigt, widerlegt und neue Erkenntnisse zur Frage „warum Deutsche in die T{\"u}rkei auswandern" gewonnen.}, language = {de} } @masterthesis{Steffens2021, type = {Bachelor Thesis}, author = {Steffens, Nina}, title = {Bahn-Buddy: Informative Gamification Reiseapp f{\"u}r die DB f{\"u}r Kinder}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {91 Seiten}, year = {2021}, abstract = {„Bahn-Buddy" ist eine App, die Kindern bei Bahnfahrten auf unterhaltsame Weise ihre Umgebung n{\"a}herbringt. Dabei wird mit GPS gearbeitet, um die Inhalte der App auf die jeweilige Bahnstrecke abzustimmen. Verschiedene Minispiele und Infoscreens sollen der Fahrt ein interaktiveres Gef{\"u}hl verleihen und somit die gef{\"u}hlte Fahrzeit f{\"u}r die Zielgruppe reduzieren. Den Kindern soll dabei auf eine spielerische Art und Weise Wissen {\"u}ber das Land, aber auch {\"u}ber alternative Verkehrsmittel und den Einfluss des Verkehrs auf die Umwelt vermittelt werden. Ziel ist es, die generelle Erfahrung des Bahnfahrens positiver zu gestalten. Dies soll zu einer fr{\"u}hen Kundenbindung f{\"u}hren und durch den geringeren CO2-Ausstoß bei Reisen mit der Bahn einen positiven Effekt auf die Umwelt haben.}, language = {de} } @masterthesis{Sonntag2021, type = {Bachelor Thesis}, author = {Sonntag, Jana}, title = {Konzeption und Entwicklung einer Corporate Identity und einer Tourismuskampagne f{\"u}r das Siegerland}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {57 Seiten}, year = {2021}, abstract = {Im Rahmen meiner Bachelorarbeit werden ich mich mit der Konzeption und Entwicklung einer Corporate Identity f{\"u}r das Siegerland besch{\"a}ftigen. Weiterhin m{\"o}chte ich eine Tourismuskampagne f{\"u}r diese Region gestalten.}, language = {de} } @masterthesis{Anders2021, type = {Bachelor Thesis}, author = {Anders, Milena}, title = {Alternative Landwirtschaft - Wo kommt unser Essen her?}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {79 Seiten}, year = {2021}, abstract = {In den letzten 1.5 Jahren haben wir sehr deutlich gemerkt, dass es den Klimawandel wirklich gibt - ein Virus, welches unsere gesamte Welt auf links dreht, {\"U}berschwemmungskatastrophen, extreme Temperaturschwankungen, etc. Es ist also Zeit etwas zu ver{\"a}ndern, es ist Zeit aktiv hinzusehen und zu handeln - bewusst zu leben, bewusst zu konsumieren. Das Thema Ern{\"a}hrung wird zwar immer wichtiger f{\"u}r einige von uns, jedoch reicht mir die Aufmerksamkeit bisher nicht. Es sind nicht nur Lebensmittel, welche nach dem Aufenthalt im Supermarkt in unserem K{\"u}hlschrank und anschließend in unserem Bauch landen. Mit diesen Lebensmitteln gehen außerdem folgende Aspekte einher: der Klimawandel, unsere Gesundheit, die Ausbeutung von Tieren, Menschen und Natur. Also wie sieht eigentlich der Enstehungsprozess hinter all diesen (meist) verpackten Lebensmitteln aus? Einen Teil dieser Prozesse habe ich mir im Rahmen meiner Bachelorarbeit angeschaut. Ich habe ausschließlich Bio-H{\"o}fe besucht, um mir ein eigenes Bild von "alternativer Landwirtschaft" zu machen. Die Arbeit erm{\"o}glicht Interessierten einen neutralen Einblick hinter die Kulisse unserer Lebensmittel und schafft eine Anregung f{\"u}r einen bewussteren Konsum.}, language = {de} } @masterthesis{Mann2021, type = {Bachelor Thesis}, author = {Mann, Judith}, title = {Entwicklung eines neuen Erscheinungsbildes f{\"u}r das Museum f{\"u}r Ostasiatische Kunst K{\"o}ln}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {89 Seiten}, year = {2021}, abstract = {Seit dem Zeitpunkt seiner Gr{\"u}ndung im Jahr 1909 lautet der Auftrag des K{\"o}lner Museums f{\"u}r Ostasiatische Kunst, der europ{\"a}ischen Gesellschaft die Kunst Ostasiens nahezubringen, f{\"u}r ein besseres Verst{\"a}ndnis und die Wertsch{\"a}tzung seiner Kultur zu sorgen und somit auch Rassismus und kolonialistischem Denken entgegenzuwirken - ein Anliegen, welches noch heute von unver{\"a}nderter Relevanz und Dringlichkeit ist. Im Zentrum des neuen Erscheinungsbildes steht der gest{\"u}rzte Buchstabe K und die somit entstehende Kombination von horizontaler und vertikaler, traditionell ostasiatischer Leserichtung deutet auf visueller Ebene ein Zusammenspiel zwischen den Kulturen an. Die Farbgebung des neuen Erscheinungsbildes greift die ruhige Atmosph{\"a}re des Museums auf und sorgt in Kombination mit einem streng gegliederten Raster f{\"u}r klare Struktur und Orientierung.}, language = {de} } @masterthesis{Najarov2021, type = {Bachelor Thesis}, author = {Najarov, Azer}, title = {Ich sehe was, was Du nicht siehst: Herkunft \& Identit{\"a}t j{\"u}discher Menschen in Deutschland nach der Nachkriegszeit}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {105 Seiten}, year = {2021}, abstract = {Wir alle haben schon einmal von ihnen geh{\"o}rt. Die einen kennen sie aus dem Geschichtsunterricht, die anderen haben sie vielleicht auch schon mal bewusst oder unbewusst auf der Straße gesehen. Einige sind es sogar selbst. Die Rede ist von j{\"u}dischen Menschen in Deutschland. In unserer Bundesrepublik wird die j{\"u}dische Bev{\"o}lkerung unausweichlich mit dem Gedanken des Holocausts verbunden. J{\"u}dinnen und Juden wird somit eine Identit{\"a}t zugesprochen, mit der sie nichts zu tun haben. Es findet eine Stigmatisierung statt. Dabei sind j{\"u}dische Menschen heutzutage so divers wie noch nie. Das Printmedium »Ich sehe was, was Du nicht siehst« beleuchtet diese selten wahrgenommene Diversit{\"a}t und zeigt durch spannende Interviews eine j{\"u}dische Welt, die außerhalb der NS-Verbrechen liegt. Dar{\"u}ber hinaus findet man Informationen zu verschiedenen j{\"u}dischen Br{\"a}uchen, historischen Ereignissen und interessanten Infografiken. }, language = {de} } @masterthesis{Muehl2021, type = {Bachelor Thesis}, author = {M{\"u}hl, Leonie}, title = {Neues Erscheinungsbild f{\"u}r den APX: Redesign des LVR - Arch{\"a}ologischen Park Xanten und des R{\"o}mermuseums}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {90 Seiten}, year = {2021}, abstract = {Der Arch{\"a}ologische Park Xanten (APX) gilt als Deutschlands einziger arch{\"a}ologischer Freiluftpark. Er zeichnet sich im Verbund mit dem R{\"o}mermuseum durch seine Lage auf dem historischen Grund einer r{\"o}mischen Metropole und seine kontinuierliche Forschungsaktivit{\"a}t aus und bietet so ein einzigartiges Umfeld von kultureller Relevanz. Ziel dieses Projektes war es, ein neues Erscheinungsbild zu entwickeln, welches klar die Thematik des Parks in den Medien erkennbar macht. Das Corporate Design dient dazu, die Inhalte des Verbundes in einem einheitlichen System medien{\"u}bergreifend zu pr{\"a}sentieren. Das Design unterst{\"u}tzt den APX in seiner Funktion als Begegnungs- und Bildungsst{\"a}tte. Aufgrund dessen ist es im Hinblick auf das Ziel relevant, das Interesse an Kulturgeschichte und Forschung zu wecken.}, language = {de} } @masterthesis{Raithel2021, type = {Bachelor Thesis}, author = {Raithel, Luise Marie}, title = {Die Wilhelma Stuttgart: Ein neues Erscheinungsbild f{\"u}r den zoologisch-botanischen Garten}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {136 Seiten}, year = {2021}, abstract = {Inmitten des Stuttgarter Kessels findet sich Deutschlands einziger zoologisch-botanischer Garten wieder - die Wilhelma. Umrahmt von einer denkmalgesch{\"u}tzten Parkanlage des 19. Jahrhunderts mit maurischen Geb{\"a}uden l{\"a}sst sie Bildung mit Freizeit verschmelzen. Das neue Erscheinungsbild positioniert die schw{\"a}bische Einrichtung sowohl als Ort des Zusammenkommens als auch der Erholung und Wissensvermittlung. Bereits vor dem Betreten der Wilhelma soll ihre besondere Charakteristik aufgezeigt und entscheidend von {\"a}hnlichen Institutionen distanziert werden. Das grundlegende Gestaltungskonzept r{\"u}ckt die Symbiose aus Zoologie, Botanik und Historie in den Vordergrund. Inspiriert von der maurischen Architektur basiert die Gesamtgestaltung auf feinen geometrischen Formen. Diese bieten Orientierung, unterstreichen die Vielf{\"a}ltigkeit der Wilhelma und vereinen sich dar{\"u}ber hinaus im Logo miteinander.}, language = {de} } @masterthesis{Mros2021, type = {Bachelor Thesis}, author = {Mros, Christina}, title = {Entwicklung eines Erscheinungsbildes sowie einer Kampagne f{\"u}r die Allianz Chronischer Seltener Erkrankungen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {89 Seiten}, year = {2021}, abstract = {Die Allianz Chronischer Seltener Erkrankungen (ACHSE) ist das einzige krankheits{\"u}bergreifende Netzwerk von und f{\"u}r Menschen mit einer seltenen Erkrankung in Deutschland. Insgesamt sind 4 Millionen Menschen in Deutschland von einer der rund 8.000 seltenen Krankheiten betroffen. Durch die Seltenheit der verschiedenen Krankheiten ist es oft schwer, Experten zu finden, die richtige Versorgung sicherzustellen oder Studien durchzuf{\"u}hren. Betroffene f{\"u}hlen sich oft nicht wahrgenommen und alleine gelassen. Die ACHSE dient als unabh{\"a}ngige Schnittstelle und Knotenpunkt zwischen Betroffenen, Regierung, Politik und Wirtschaft. Gemeinsam b{\"u}ndeln sich hier 130 Patientenorganisationen unter einem Dach, um die Betroffenen in den Fokus zu r{\"u}cken. Ziel der Bachelorarbeit ist die Entwicklung eines Erscheinungsbildes sowie einer Kampagne, die das Thema mehr ins Bewusstsein der {\"O}ffentlichkeit bringt und informiert.}, language = {de} } @masterthesis{Mueller2021, type = {Bachelor Thesis}, author = {M{\"u}ller, Elona}, title = {Aus den Augen aus dem Sinn?: Ein Bookazine deckt das Problem des Unsichtbaren M{\"u}lls auf}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, year = {2021}, abstract = {M{\"u}ll ist immer und {\"u}berall vorhanden - auch wenn wir ihn nicht sehen. Gerade unsichtbarer M{\"u}ll birgt f{\"u}r den Menschen und seine Umwelt erhebliche Gefahren, die durch seine Unsichtbarkeit irrelevant erscheinen. Die Publikation mit dem Titel mikromakro deckt durch verschiedene Artikel, Interviews und Texte die Gefahren auf, die durch den unsichtbaren M{\"u}ll entstehen. Ziel war es, eine Bookazine-Reihe zu konzipieren, die in sechs Ausgaben das Thema des unsichtbaren M{\"u}lls beleuchtet. Die erste Ausgabe zum Thema Kunststoff wurde exemplarisch gestaltet. Zus{\"a}tzlich zum redaktionellen Teil untermauern Infografiken die Texte faktisch und Fotoserien emotional. Da unsichtbarer M{\"u}ll auf zwei Ebenen zu finden ist - der Makro- (groß) und Mikroebene (klein) - wurde die Publikation inhaltlich zweigeteilt, sodass sich das Layout und die Fotoserien vom Mikro- und Makroteil unterscheiden. }, language = {de} } @article{BiewendtBlaschkeBoehnert2021, author = {Biewendt, Marcel and Blaschke, Florian and B{\"o}hnert, Arno}, title = {Motivational factors in organisational change}, series = {SocioEconomic Challenges}, volume = {5}, journal = {SocioEconomic Challenges}, number = {3}, publisher = {ARMG}, address = {Sumy}, issn = {2520-6214}, doi = {10.21272/sec.5(3).15-27.2021}, pages = {15 -- 27}, year = {2021}, abstract = {The presented paper gives an overview of the most important and most common theories and concepts from the economic field of organisational change and is also enriched with quantitative publication data, which underlines the relevance of the topic. In particular, the topic presented is interwoven in an interdisciplinary way with economic psychological models, which are underpinned within the models with content from leading scholars in the field. The pace of change in companies is accelerating, as is technological change in our society. Adaptations of the corporate structure, but also of management techniques and tasks, are therefore indispensable. This includes not only the right approaches to employee motivation, but also the correct use of intrinsic and extrinsic motivational factors. Based on the hypothesis put forward by the scientist and researcher Rollinson in his book "Organisational behaviour and analysis" that managers believe motivational resources are available at all times, socio-economic and economic psychological theories are contrasted here in order to critically examine this statement. In addition, a fictitious company was created as a model for this work in order to illustrate the effects of motivational deficits in practice. In this context, the theories presented are applied to concrete problems within the model and conclusions are drawn about their influence and applicability. This led to the conclusion that motivation is a very individual challenge for each employee, which requires adapted and personalised approaches. On the other hand, the recommendations for action for supervisors in the case of motivation deficits also cannot be answered in a blanket manner, but can only be solved with the help of professional, expert-supported processing due to the economic-psychological realities of motivation. Identifying, analysing and remedying individual employee motivation deficits is, according to the authors, a problem and a challenge of great importance, especially in the context of rapidly changing ecosystems in modern companies, as motivation also influences other factors such as individual productivity. The authors therefore conclude that good motivation through the individual and customised promotion and further training of employees is an important point for achieving important corporate goals in order to remain competitive on the one hand and to create a productive and pleasant working environment on the other.}, language = {en} } @article{BiewendtBlaschkeBoehnert2021, author = {Biewendt, Marcel and Blaschke, Florian and B{\"o}hnert, Arno}, title = {A review of contemporary challenges in business culture}, series = {International Journal of Applied Research in Business and Management}, volume = {2}, journal = {International Journal of Applied Research in Business and Management}, number = {1}, publisher = {Wohllebe \& Ross Publishing}, address = {Hamburg}, issn = {2700-8983}, doi = {10.51137/ijarbm.2021.2.1.1}, pages = {1 -- 12}, year = {2021}, abstract = {The following article deals with the basic principles of intercultural management and possible improvements in terms of cultural, ethnic and gender diversification. The results are exemplarily applied to a bank located in Germany. The aim of this paper is to find out to what extent intercultural management could improve the productivity of Relatos-Bank in dealing with foreign employees or employees with a different cultural background. To achieve this goal, the authors con-duct a literature research. The main sources of information are books, journal articles and internet sources. It becomes clear that especially the different perceptions of different generations have a potential for conflict, which can be counteracted by applying presented scientific models. Equalizing the salaries of female and male employees and equalizing the rights and distribution of power could also be the key to becoming an open-minded, dynamic and fair organization that is pre-pared for the rapidly changing environment in which it operates.}, language = {en} } @article{Golland2021, author = {Golland, Alexander}, title = {Datenschutzkonforme Test-, Impf- und Genesungskontrollen in Betrieben der Privatwirtschaft}, series = {DSB Datenschutz-Berater}, volume = {45}, journal = {DSB Datenschutz-Berater}, number = {5}, publisher = {DFV Mediengruppe}, address = {Frankfurt a.M.}, issn = {0170-7256}, pages = {158 -- 160}, year = {2021}, language = {de} } @masterthesis{Devjatko2021, type = {Bachelor Thesis}, author = {Devjatko, Elli}, title = {Hyphan - ein modulares Sitzsystem mit intelligenten Materialien}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {173 Seiten}, year = {2021}, abstract = {Hyphan ist ein modulares System, welches sich aus diversen Grundelementen aufbaut. Die M{\"o}glichkeiten des Aufbaus sind vielseitig und Umfangreich. Achsiale- sowie lineare Erweiterung sorgen f{\"u}r ein Modul Umfang, der zahlreiche Fl{\"a}che erschaffen kann. So kann L{\"a}nge und Tiefe eines Objekts umfangreich sowie vielf{\"a}ltig gestaltet werden. Hyphan wendet sich an die Bed{\"u}rfnisse der Neuen Generationen, versucht flexibel in seiner Form zu sein und zuverl{\"a}ssig, langlebig und qualitativ in seinem Material. Durch die Diskussion {\"u}ber die neuen Formen der Mobilit{\"a}t und dem Nachhaltigkeitsaspekt sehe ich in der Gestaltung von urbanen Knotenpunkten und ihren Interior sehr großes Potenzial f{\"u}r Hyphan.}, language = {de} } @masterthesis{Buechel2021, type = {Bachelor Thesis}, author = {B{\"u}chel, Carolin}, title = {Fitnesssport: Gestaltung eines mobilen Outdoor-Trainingssystems}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {212 Seiten}, year = {2021}, abstract = {Der Wunsch nach Gesundheit und Individualisierung der eigenen Freizeit als Ausgleich zum Alltag ist heute in der Gesellschaft so ausgepr{\"a}gt wie noch nie. Dabei sind die positiven Auswirkungen k{\"o}rperlicher Aktivit{\"a}t auf das Immunsystem, die Lebenserwartung und die Leistungsf{\"a}higkeit immer bekannter. Diese Abschlussarbeit greift die erkannte Entwicklung und den wachsenden Wunsch der Nutzenden nach individuellem Fitnesstraining im Freien auf. Das entstandene Outdoor-Trainingssystem „TREICK" erm{\"o}glicht ein mobiles, orts- und zeitunabh{\"a}ngiges Training der eigenen Fitness. Durch „TREICK" kann der Sportler physiologisch sinnvolle Eigengewichts{\"u}bungen in einer selbst gew{\"a}hlten Umgebung ausf{\"u}hren, wodurch das Wohlbefinden und damit die Gesundheit gef{\"o}rdert werden kann. Das System kann als Rucksack oder Fahrradtasche transportiert werden, wobei die Trainingsmatte als Verpackung dient.}, language = {de} } @article{BechtSchollmayerMonakhovaetal.2021, author = {Becht, Alexander and Schollmayer, Curd and Monakhova, Yulia and Holzgrabe, Ulrike}, title = {Tracing the origin of paracetamol tablets by near-infrared, mid-infrared, and nuclear magnetic resonance spectroscopy using principal component analysis and linear discriminant analysis}, series = {Analytical and Bioanalytical Chemistry}, volume = {413}, journal = {Analytical and Bioanalytical Chemistry}, publisher = {Springer Nature}, issn = {1618-2650}, doi = {10.1007/s00216-021-03249-z}, pages = {3107 -- 3118}, year = {2021}, abstract = {Most drugs are no longer produced in their own countries by the pharmaceutical companies, but by contract manufacturers or at manufacturing sites in countries that can produce more cheaply. This not only makes it difficult to trace them back but also leaves room for criminal organizations to fake them unnoticed. For these reasons, it is becoming increasingly difficult to determine the exact origin of drugs. The goal of this work was to investigate how exactly this is possible by using different spectroscopic methods like nuclear magnetic resonance and near- and mid-infrared spectroscopy in combination with multivariate data analysis. As an example, 56 out of 64 different paracetamol preparations, collected from 19 countries around the world, were chosen to investigate whether it is possible to determine the pharmaceutical company, manufacturing site, or country of origin. By means of suitable pre-processing of the spectra and the different information contained in each method, principal component analysis was able to evaluate manufacturing relationships between individual companies and to differentiate between production sites or formulations. Linear discriminant analysis showed different results depending on the spectral method and purpose. For all spectroscopic methods, it was found that the classification of the preparations to their manufacturer achieves better results than the classification to their pharmaceutical company. The best results were obtained with nuclear magnetic resonance and near-infrared data, with 94.6\%/99.6\% and 98.7/100\% of the spectra of the preparations correctly assigned to their pharmaceutical company or manufacturer.}, language = {en} } @misc{Monse2021, type = {Master Thesis}, author = {Monse, Henry}, title = {(K)eine Opposition: Die Wahlkampfgestaltung der SPD und CDU von 1945—1990 im historischen Kontext}, publisher = {FH Aachen}, address = {Aachen}, pages = {66 Seiten}, year = {2021}, abstract = {Im Zentrum des Buches stehen die beiden Volksparteien CDU und SPD, die sich als gegens{\"a}tzliche, gar verfeindete Parteien startend, gegenw{\"a}rtig in ihren visuellen und inhaltlichen Identit{\"a}ten immer unerkenntlicher vermischen. Das Buch geht dem Ursprung dieser Vermischung auf die Spur und untersucht inwiefern sich die visuellen Identit{\"a}ten der beiden Parteien zwischen 1945 und 1990 in Form der Gestaltung nach außen aneinander angeglichen haben und wer wann federf{\"u}hrend in der Gestaltung war. Beginnend 1945 in der »Stunde Null« f{\"u}hrt das Buch in den einzelnen Kapiteln durch das Zeitgeschehen der Bundesrepublik bis ins Jahr 1990. Der historische Querschnitt beleuchtet dabei das gesellschaftspolitische Zeitgeschehen, das den Wahlk{\"a}mpfen zugrunde liegt. Dabei stehen die politischen Wahlplakate im Fokus der Untersuchung: SPD und CDU — (k)eine gestalterische Opposition?}, language = {de} } @book{KurzSchwer2021, author = {Kurz, Melanie and Schwer, Thilo}, title = {Designentscheidungen : {\"u}ber Begr{\"u}ndungen im Entwurfsprozess / herausgegeben von Melanie Kurz und Thilo Schwer}, series = {Schriften / Gesellschaft f{\"u}r Designgeschichte}, journal = {Schriften / Gesellschaft f{\"u}r Designgeschichte}, publisher = {avedition}, address = {Stuttgart}, isbn = {978-3-89986-353-6}, pages = {143 Seiten : Illustrationen}, year = {2021}, language = {de} } @incollection{Peterson2021, author = {Peterson, Leif Arne}, title = {Holzbau}, series = {Wof{\"u}r braucht man das eigentlich? Ein Handbuch f{\"u}r Mathematiklehrkr{\"a}fte der Sekundarstufe I und II}, booktitle = {Wof{\"u}r braucht man das eigentlich? Ein Handbuch f{\"u}r Mathematiklehrkr{\"a}fte der Sekundarstufe I und II}, editor = {Schl{\"u}ter, Dominik}, publisher = {BoD}, address = {Norderstedt}, isbn = {978-3-7543-2606-0}, pages = {21 -- 23}, year = {2021}, language = {de} } @incollection{Kurz2021, author = {Kurz, Melanie}, title = {Zur Multikausalit{\"a}t von Designentscheidungen - eine Beispielsammlung}, series = {Designentscheidungen: {\"u}ber Begr{\"u}ndungen im Entwurfsprozess}, booktitle = {Designentscheidungen: {\"u}ber Begr{\"u}ndungen im Entwurfsprozess}, publisher = {avedition}, address = {Stuttgart}, isbn = {978-3-89986-353-6}, pages = {22 -- 43}, year = {2021}, language = {de} } @masterthesis{Hirt2021, type = {Bachelor Thesis}, author = {Hirt, Miriam}, title = {Zwei sind eine Gemeinschaft: Illustrative Neuinterpretation des Romans "Eine Insel" von T. Pratchett}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {143 Seiten}, year = {2021}, abstract = {Das Projekt „Zwei sind eine Gemeinschaft" befasst sich mit der Entwicklung einer gebundenen Fassung der Graphic Novel als Adaption des Kinderromans „Eine Insel" von Terry Pratchett. Diese soll den Betrachtenden erm{\"o}glichen, mittels ansprechenden Illustrationen tiefer in die fantasievolle Welt der Geschichte einzutauchen, dem Alltag zu entfliehen und so die Begeisterung zum Medium Buch wieder aufleben zu lassen. Durch die Verbindung von Techniken des Grafikdesigns und der klassischen Illustration verbindet der Stil sowohl die moderne, ausdrucksstarke und sehr grafische Bildsprache mit der Eigenschaft, kreativen Interpretationsspielraum zu lassen und tiefe Emotionen zu erzeugen. Die besondere Innovation des Projekts zeigt sich durch das Konzept des illustrativen Baukastensystems, welches erm{\"o}glicht, die einzelnen Illustrationen effizient und intuitiv zu gestalten.}, language = {de} } @masterthesis{Sorgalla2021, type = {Bachelor Thesis}, author = {Sorgalla, Jonas}, title = {Skidio - die digitale Transformation der Kosmetikindustrie : die Entwicklung eines digitalen Vertriebskanals}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {159 Seiten}, year = {2021}, abstract = {Skidio basiert dabei auf dem Konzept, dass das Video f{\"u}r die Kosmetikindustrie das optimale Medium f{\"u}r Produktvorstellungen ist. Der Ausgangspunkt f{\"u}r das Einkaufserlebnis des Nutzers ist daher ein Video-Feed, bestehend aus Kurz- und Live-Videos, die einen direkten Kauf der gezeigten Produkte erm{\"o}glichen. So entsteht ein Ort, an dem Nutzer auf eine unterhaltsame Art und Weise Inspiration f{\"u}r die eigene Hautpflege finden k{\"o}nnen. Dabei ist das Video als Medium nicht nur unterhaltsamer, sondern zugleich auch deutlich informativer als klassische Produktlistings. Die Produktpr{\"a}sentation wird interaktiver, erlebbarer und deutlich effektiver. Gemeinsam mit Technologien wie einer digitalen Hautanalyse, wird so das Potenzial des E-Commerce f{\"u}r die Beautyindustrie vollst{\"a}ndig entfaltet.}, language = {de} } @masterthesis{Holtschlag2021, type = {Bachelor Thesis}, author = {Holtschlag, Uli}, title = {tape foundry: Eine Distribubutionsplattform f{\"u}r studentische Schriften}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {55 Seiten}, year = {2021}, abstract = {Die »tape foundry« ist eine interdisziplin{\"a}re Distributionsplattform f{\"u}r studentische Schriften, die Studierende auf dem großen Type-Design Markt neu platziert und einen Raum zur Entfaltung gibt. Besonders durch Instagram ist die heutige Type-Designszene gr{\"o}ßer denn je und viele Entw{\"u}rfe gehen in der Maße unter. Um diesem Ph{\"a}nomen entgegenzuwirken wurde die »tape foundry« ins Leben gerufen. Sie versucht mit der Kombination aus Fotografie, Type Design und der Funktion als Kassettenlabel neue interdisziplin{\"a}re Wege zu gehen, um sich von der klassischen {\"A}sthetik abzusetzen. Die Webseite stellt sich bewusst gegen g{\"a}ngige UX/UI Standards und setzt auf neue Nutzungsprinzipien kombiniert mit einer lauten kontrastreichen Bildwelt.}, language = {de} } @masterthesis{Niederschmidt2021, type = {Bachelor Thesis}, author = {Niederschmidt, S{\"o}ren}, title = {Living product: ein Ansatz, lebendige Organismen mit einem Produkt zu vereinen und nutzbar zu machen}, publisher = {FH Aachen}, address = {Aachen}, pages = {57 Seiten}, year = {2021}, abstract = {Diese Arbeit setzt sich mit der Frage auseinander, in welcher Form sich lebendige Organismen - hier insbesondere Pilze - in die Produktwelt integrieren lassen. In welcher Art und Weise beeinflusst ein Organismus das Produkterlebnis? Im Rahmen dieser Arbeit sind vier verschiedene Produkte entstanden, die die St{\"a}rken des Materials Myzelium demonstrieren. Myzelium bezeichnet das sehr dichte Wurzelnetzwerk eines Pilzes. Dieses lebendige Netzwerk kann dazu genutzt werden, um organische Stoffe miteinander zu verwachsen und somit Formen entstehen zu lassen. Die so entstandenen Produkte sind in eine Konzeptumgebung eingebettet, in der der Verbrauchende die Natur durch naturn{\"a}here Produkte (Form, Material und gewachsene Strukturen) neu erlebt. Gezeigt wird ein Packaging f{\"u}r Einmachgl{\"a}ser, ein Kressebeet, ein Wandregal und ein Teelicht.}, language = {de} } @masterthesis{Vorholt2021, type = {Bachelor Thesis}, author = {Vorholt, Lara}, title = {Fitted Fashion: Sizing-L{\"o}sung zur Steigerung der Konversion \& Reduzierung von E-Commerce-Retouren}, publisher = {FH Aachen}, address = {Aachen}, pages = {235 Seiten}, year = {2021}, abstract = {Die Zahl der Nutzenden beim Onlineshopping ist in den letzten Jahren deutlich gewachsen. Eines der gr{\"o}ßten Probleme dabei: Die Retouren. Sowohl die Wirtschaft als auch die Umwelt leiden darunter. Der Hauptgrund f{\"u}r R{\"u}cksendungen sind dabei Schwierigkeiten bei der Auswahl der individuell richtigen Gr{\"o}ße. Das Ziel dieses Projektes ist es daher, eine 3D-K{\"o}rperscan-App zu erstellen. Mit dieser ist es m{\"o}glich, einen auf die eigenen K{\"o}rpermaße angepassten Avatar zu erstellen und eine angepasste Stilberatung f{\"u}r die jeweilige K{\"o}rperform angeboten zu bekommen. Zudem gibt es eine Applikation in Form eines Software Development Kits, welches in Onlineshops eingebunden werden kann. Mit Hilfe der Applikation bekommen Konsumenten die richtige Gr{\"o}ße auch beim Onlineshopping angezeigt und t{\"a}tigen so weniger Fehlk{\"a}ufe. Dies bringt nicht nur Vorteile f{\"u}r die Umwelt mit sich und den Unternehmen eine massive Kostenersparnis durch die Einsparung von Retouren, M{\"u}ll und Personal, sondern schlussendlich auch eine zufriedenere Kundschaft.}, language = {de} } @masterthesis{Steinicke2021, type = {Bachelor Thesis}, author = {Steinicke, Nicola}, title = {Ein Erscheinungsbild f{\"u}r die Deutsche Stiftung Denkmalschutz}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {123 Seiten}, year = {2021}, abstract = {Die Deutsche Stiftung Denkmalschutz (DSD) ist die gr{\"o}ßte, private Stiftung Deutschlands, die sich f{\"u}r die F{\"o}rderung von unter Denkmalschutz stehenden Objekten einsetzt. Das neugestaltete Erscheinungsbild soll die Fachlichkeit der Organisation herausstellen und zugleich kreativ und kommunikativ eine breite Zielgruppe ansprechen. Die DSD bietet neben der Denkmalerhaltung auch Bildungsangebote f{\"u}r Jung und Alt an, wie auch Veranstaltungen f{\"u}r die Bewusstseinsbildung im Denkmalschutz. Als Sprachrohr zwischen der Stiftung und den F{\"o}rdernden dient das Magazin MONUMENTE. Denkmalschutz mag f{\"u}r manche uninteressant und eingestaubt wirken, da die Besch{\"a}ftigung mit bereits Bestehendem und das Verhindern von Verfall belanglos sein k{\"o}nnte. Weiß man allerdings {\"u}ber die Bedeutung f{\"u}r Kultur, Gesellschaft und Wirtschaft, so macht Denkmalschutz eine essenzielle Komponente unserer Kulturlandschaft aus. Die Auseinandersetzung mit der DSD soll das herausstellen und das Bewusstsein f{\"u}r diesen kulturellen Bestandteil des Denkmalschutzes vertiefen. }, language = {de} } @masterthesis{Wild2021, type = {Bachelor Thesis}, author = {Wild, Lisa}, title = {UKIYO: Eine Neuinterpretation der fließenden Welt}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, year = {2021}, abstract = {Ukiyo kommt aus dem Japanischen und bedeutet {\"u}bersetzt so viel wie: „Den Moment leben, ohne von den Sorgen des Lebens ber{\"u}hrt zu werden." Gerade in Zeiten der Pandemie verliert man oft den Blick f{\"u}r das Sch{\"o}ne im Leben. Der Fotoband „UKIYO" soll dazu anregen, allt{\"a}gliche Dinge aus einem neuen Blickwinkel zu betrachten und die Sch{\"o}nheit im Verg{\"a}nglichen zu erkennen. Die Fotografien sind inspiriert durch das japanische Kunstgenre Ukiyo-e, was w{\"o}rtlich {\"u}bersetzt etwa „Bilder der heiteren, fließenden Welt" heißt. Die Gestaltung des Bildbandes orientiert sich an verschiedenen japanischen Stilmitteln, wie zum Beispiel Wabi-Sabi (die Sch{\"o}nheit im Unvollkommenen) und Mono no aware (eine melancholische Mischung aus Freude, Trauer und Hinnahme). „UKIYO" nimmt die Betrachter mit auf eine kleine Reise durch die fließende Welt. }, language = {de} } @masterthesis{Tran2021, type = {Bachelor Thesis}, author = {Tran, Thuy Tien}, title = {Shaping the Future of E-Government: Design System zur Implementierung digitaler {\"o}ffentlicher Services}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {235 Seiten}, year = {2021}, abstract = {Der digitale Transformationsprozess ist einer der gr{\"o}ßten gesellschaftlichen Umbr{\"u}che in der Geschichte der Menschheit. Aufgrund der Corona-Pandemie stieg die Nutzung von digitalen Kan{\"a}len bei den B{\"u}rger:innen wie nie zuvor und f{\"u}hrt zu einem sprunghaften Anstieg der Nachfrage nach {\"o}ffentlichen Services in digitaler Form. Das Ziel dieser Bachelorarbeit ist es, einen digitalen Raum zu gestalten, der den analogen Weg zum Amt gr{\"o}ßtenteils erspart. Mit geeigneten Kommunikationskan{\"a}len kann auf die Bed{\"u}rfnisse unterschiedlicher Gruppen eingegangen werden. Die Entwicklung der Anwendung IDport bietet sowohl private als auch staatliche Einsparpotenziale. B{\"u}rokratische Aufw{\"a}nde sollen durch eine neue Art des E-Government beseitigt werden. Die Konzeption ist infolge der aktuellen Gegebenheit in Deutschland weit entfernt von einer realit{\"a}tsnahen Umsetzung, weshalb es sich bei der Anwendung um eine revolution{\"a}re Zukunftsvision handelt.}, language = {de} } @masterthesis{Schultheis2021, type = {Bachelor Thesis}, author = {Schultheis, Anna Laura}, title = {EmanziPardon: Sind die Aussagen von Simone de Beauvoir aus ‚Das andere Geschlecht' heute noch relevant?}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {81 Seiten}, year = {2021}, abstract = {Simone de Beauvoir ver{\"o}ffentlichte 1949 ihr Werk ‚Das andere Geschlecht', in welchem sie die subjektiven und objektiven Einschr{\"a}nkungen, Belastungen und die Abh{\"a}ngigkeiten vom Mann darlegt, denen Frauen schon seit tausenden Jahren ausgesetzt waren und sind. Aber wie ist das heute? Sind diese Aussagen {\"u}berhaupt noch aktuell bzw. relevant? Innerhalb der Publikation werden Kernthesen aber auch Textausschnitte aus ihrem Werk aufgef{\"u}hrt sowie aktuelle Artikel, die sich mit der derzeitigen Lage befassen. Durch das gestalterische Konzept innerhalb der Publikation, haben die Lesenden die M{\"o}glichkeit, sich konkret mit genau den Themen zu befassen, die jeweils dem pers{\"o}nlichen Interesse entsprechen. Die Publikation dient als Erinnerung und als Nachschlagewerk, um immer wieder lesen k{\"o}nnen, welche K{\"a}mpfe hinsichtlich der Gleichstellung der Geschlechter bereits gek{\"a}mpft wurden und welche noch gek{\"a}mpft werden m{\"u}ssen.}, language = {de} } @masterthesis{Beil2021, type = {Bachelor Thesis}, author = {Beil, Franziska}, title = {Mobilit{\"a}t im Alter: der Rollator der n{\"a}chsten Generation}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {73 Seiten}, year = {2021}, abstract = {Da die Gesellschaft in Deutschland immer {\"a}lter wird, steigt auch die Nachfrage nach Gehhilfen wie beispielsweise einem Rollator. Im Alter steigt das Erkrankungsrisiko f{\"u}r Krankheiten, die die Mobilit{\"a}t erschweren k{\"o}nnen. An diesem Punkt setzt der Rollator MORO an und bietet wieder Sicherheit beim Gehen. F{\"u}r den MORO sind Hindernisse wie Bordsteinkanten kein Problem, da er sie mit speziellen R{\"a}dern spielend {\"u}berwinden kann. Zus{\"a}tzlich bietet er ergonomische Handgriffe, die entsprechend der jeweiligen Krankheit angepasst und ausgetauscht werden k{\"o}nnen sowie einen Sitz und eine R{\"u}ckenlehne. Da der MORO aus Carbon hergestellt wird, ist er leicht in der Handhabung und somit wird die Mitnahme im Auto oder Bus und Bahn erleichtert. Durch seine verbesserte Ergonomie, individueller Anpassung und Leichtigkeit kann man wieder selbstst{\"a}ndig durch die Welt gehen.}, language = {de} } @masterthesis{Dieter2021, type = {Bachelor Thesis}, author = {Dieter, Helen}, title = {Koji - Entwicklung eines h{\"o}henverstellbaren Tisches zur Nutzung in Wohn- und Essr{\"a}umen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {135 Seiten}, year = {2021}, abstract = {Um den immer komplexer werdenden Anspr{\"u}chen an Wohnraum gerecht zu werden, braucht es M{\"o}bel, die vielseitig und anpassbar sind. Koji ist ein Tisch, dessen Tischplatte unkompliziert in der H{\"o}he verstellt werden und so in diversen Wohnsituationen eingesetzt werden kann. Er kann als Esstisch genauso genutzt werden wie als Beistell- oder Couchtisch. Durch die Mechanik, die die H{\"o}henverstellbarkeit erm{\"o}glicht, bekommt der Tisch einen verspielten, beinahe lebendigen Charakter, der zur Interaktion einl{\"a}dt. Er ist mehr als ein stummer Begleiter des Alltags, sondern vielmehr Inspiration, seine Umgebung aktiv zu gestalten, um sie so f{\"u}r sich optimal einzurichten.}, language = {de} } @masterthesis{Theisen2021, type = {Bachelor Thesis}, author = {Theisen, Paul}, title = {Die {\"a}sthetische Tonalit{\"a}t des Jazz : Immersion durch 3D-Visualisierung und musikalische Interaktion}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {111 Seiten}, year = {2021}, abstract = {Das Ausstellungskonzept »Free Jazz: A Collective Improvisation« widmet sich der {\"a}sthetischen Tonalit{\"a}t des gleichnamigen Albums von Ornette Coleman. Das besagte Album bildete den Grundstein f{\"u}r die Etablierung des Free Jazz - einer Musikform, die sich durch ihre schrille, hierarchiefreie Klangwelt sowie ein freies Improvisationsspiel auszeichnet und mit den g{\"a}ngigen Konventionen des Jazz bricht. Zu jedem der 8 Musiker, welche gemeinsam das von Coleman zusammengestellte Doppelquartett ergeben, wurden individuell abgestimmte, animierte und interaktive 3D-Gebilde konzipiert. Diese reagieren auf den Sound der jeweiligen Instrumente sowie die Position der Besuchenden und erm{\"o}glichen einen audiovisuellen, immersiven Zugang zum Album. Die Interaktion zwischen dem Publikum und den Gebilden schafft Raum f{\"u}r eine kollektive Improvisation auf sowohl der visuellen als auch auditiven Ebene.}, language = {de} } @masterthesis{Flohr2021, type = {Bachelor Thesis}, author = {Flohr, Katharina Sophie}, title = {Real:ly?: Perspektiven \& soziokulturelle Unterschiede in der Berichterstattung}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {105 Seiten}, year = {2021}, abstract = {Wie real ist unsere Realit{\"a}t? Wie »wirklich« ist das, was wir wahrnehmen und wie »wahr« kann die »Wahrheit« eigentlich sein? Medial vermittelte Informationen spielen f{\"u}r den Prozess der Meinungsbildung eine entscheidende Rolle. In der Wanderausstellung real:ly? geht es um einen Perspektivwechsel. Am Beispiel der »Atomwaffentests auf den Marshallinseln« wird das medial erzeugte Bild amerikanischer Berichterstattung pers{\"o}nlichen Geschichten der Marshaller*innen gegen{\"u}bergestellt: Technologischer Fortschritt, das Wettr{\"u}sten mit der UdSSR und die Macht {\"u}ber die Atombombe treffen auf Erz{\"a}hlungen {\"u}ber Zwangsumsiedlung, Krankheit, Ausbeutung und Abh{\"a}ngigkeit. real:ly? soll daran erinnern, die andere Seite der Medaille zu bedenken und eine andere Perspektive einzunehmen, bevor man seine Meinung bildet. Denn alles, was wir zu wissen glauben, ist nur ein kleiner Teil der ganzen Geschichte.}, language = {de} } @masterthesis{Henkenjohann2021, type = {Bachelor Thesis}, author = {Henkenjohann, Janne}, title = {Erlebnisraum Theater: Entwicklung des Corporate Designs sowie crossmedialer Konzepte}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {181 Seiten}, year = {2021}, abstract = {Die Kunst des Theaters ist alt. Gegenw{\"a}rtig z{\"a}hlt sie allerdings immer noch zu den wichtigsten Tr{\"a}gern des k{\"u}nstlerischen Kulturguts. Doch die Welt in der wir leben hat sich in den letzten Jahren deutlich ver{\"a}ndert. Sie ist komplexer geworden. Die Anzahl der losen Informationen, die in unsere Wahrnehmungsbereiche hineinragen, hat sich explosionsartig erh{\"o}ht. Ein großer Anteil dieser Ver{\"a}nderung ist auf die Digitalisierung verschiedener Lebensbereiche zur{\"u}ckzuf{\"u}hren. Die Werkzeuge, welche im Zuge der Digitalisierung kreiert wurden, werden von den meisten heute selbstverst{\"a}ndlich genutzt. Doch was bedeutet diese neue Entwicklung f{\"u}r das Theater und wie sollte es auf diese Ver{\"a}nderungen reagieren? Als gestalterische Antwort entstand ein neues Erscheinungsbild, welches crossmedial sowohl die analogen S{\"a}ulen des Theaters, als auch die neuen digitalen Formen des Alltags auffangen und kommunizieren kann.}, language = {de} } @masterthesis{Drees2021, type = {Bachelor Thesis}, author = {Drees, Niklas}, title = {Retrieval: Ein experimenteller Film {\"u}ber Erinnerungen und wie sie uns definieren}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {198 Seiten}, year = {2021}, abstract = {Welchen Einfluss haben Erinnerungen auf unser Bewusstsein und wie definieren sie uns als Individuum? Erinnerungen gehen verloren — sei es durch einfaches Vergessen, traumatische Erlebnisse oder Krankheit. Aber wie sehr wirkt sich das Vergessen auf unsere Pers{\"o}nlichkeit aus? Wenn wichtige Erlebnisse aus unserer Erinnerung verschwinden, bleiben wir dann noch wir selbst? F{\"u}r die gestalterische Auseinandersetzung mit diesen Fragen wurde das Medium Film gew{\"a}hlt. Der Film f{\"u}hrt uns auf eine Reise durch die Erinnerungs- und Gedankenwelt einer Person, die ihre Erinnerung verloren hat. Mit der Hilfe des Psychologen Dr. Daniel Rose soll ein Memory-Backup durchgef{\"u}hrt werden, um die verlorenen Erinnerungen wiederherzustellen. Dabei sollen ihre Erinnerungen neu aufgesetzt werden, um ihr altes Bewusstsein zur{\"u}ckzugewinnen. St{\"u}ck f{\"u}r St{\"u}ck werden die verlorenen Erinnerungen in verschiedenen Bewusstseinsphasen zusammengesetzt und mit ihnen l{\"o}st sich das R{\"a}tsel ihres Verschwindens.}, language = {de} } @masterthesis{Funger2021, type = {Bachelor Thesis}, author = {Funger, Marvin}, title = {Historie kinetischer Typografie: zeitliche Abbildung der Entstehung und Ver{\"a}nderung kinetischer Typografie}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {235 Seiten}, year = {2021}, abstract = {Die heutige, vielf{\"a}ltige kinetische Typografie hat eine lange Entwicklung durchgemacht. Die Darstellung dieser in einer zeitlichen Reihenfolge vermittelt ein Verst{\"a}ndnis {\"u}ber Ursprung und Evolution. Die Publikation stellt die historische, analoge sowie die moderne, digitale Entwicklung dar. Dabei wird die Verbindung und der Einfluss der damaligen Gestaltung in der heutigen Umsetzung beleuchtet. Die Plakatreihe erkl{\"a}rt drei Anwendungsm{\"o}glichkeiten der kinetischen Typografie. Hierbei werden teils reale Objekte nachgestellt, um die Wiedererkennung dieser im Alltag zu f{\"o}rdern. Gemeinsam zeigen die Plakate und die Publikation ein breites Spektrum der kinetischen Typografie und f{\"o}rdern das Verst{\"a}ndnis dieser digitalen Umsetzung von Schrift in bewegter Form.}, language = {de} } @masterthesis{Goetz2021, type = {Bachelor Thesis}, author = {Goetz, Miriam}, title = {Der globale Haarmarkt: Gestaltung eines aufkl{\"a}renden Mediums zum Thema Haar und Haarhandel}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {77 Seiten}, year = {2021}, abstract = {Niemand kann der t{\"a}glichen Erfahrung mit Haaren entfliehen. Ob es nun der eigene Blick in den Spiegel ist, die Begegnung mit anderen Menschen, oder die mit Testimonials gespeiste Werbung f{\"u}r diverse Haarprodukte. Haare geh{\"o}ren zum Alltag. Aber was steckt hinter dem Haar, wenn es denn einmal von uns und unserer Person getrennt wird und nur noch als k{\"o}rperloses B{\"u}schel erkennbar ist? Zum Beispiel in Form von Echthaarextensions. Wer bedient freiwillig und unfreiwillig durch die eigene Haarpracht die millionenschwere Echthaarindustrie? Wer profitiert von der haarigen Ware und wer sind die K{\"a}ufer, die den globalen Handel vorantreiben? Das j{\"a}hrlich erscheinende Bookazine TRICHOTOMY geht diesen Fragestellungen auf den Grund. Investigative Artikel enth{\"u}llen die Produktion und {\"O}konomie der vorwiegend anonymisierten Echthaarindustrie und portr{\"a}tieren die Menschen und Schicksale 'hinter den Haaren'.}, language = {de} } @masterthesis{Hahn2021, type = {Bachelor Thesis}, author = {Hahn, Veronika}, title = {Masculinity: M{\"a}nnlichkeit im 21. Jahrhundert}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {62 Seiten}, year = {2021}, abstract = {Was ist „M{\"a}nnlichkeit" und was verstehen junge Erwachsene unter diesem Begriff? Das Ziel des Projektes war 18 bis 30 j{\"a}hrige Jungen und M{\"a}nner des biologisch m{\"a}nnlichen Geschlechts zu befragen, was ihre Definition von M{\"a}nnlichkeit sei. Diese Arbeit hatte die Intention den Befragten einen sicheren Raum zu geben, damit sie ihre ehrlichen Antworten {\"a}ußern und ihre wahren Gesichter zeigen k{\"o}nnen. Die dabei entstandenen Fotografien sollen die Pers{\"o}nlichkeiten und die seelische Verfassung der abgebildeten Personen widerspiegeln. Es handelt sich um eine soziologische Bestandsaufnahme der „M{\"a}nnlichkeiten" der heutigen Jugend und der heranwachsenden Erwachsenen im 21. Jahrhundert.}, language = {de} } @masterthesis{Mauve2021, type = {Bachelor Thesis}, author = {Mauve, Ira}, title = {YOKU: Ein Therapieprodukt f{\"u}r Fasziale Verklebungen und Muskel- Skelett-Erkrankungen.}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {125 Seiten}, year = {2021}, abstract = {Yocu ist ein Konzept f{\"u}r den Gesundheitssektor, dass unter der Betrachtung der relevanten Trends und der Researchergebnisse den Therapieansatz des „Schr{\"o}pfen" in einen neuen modernen Kontext setzt, dabei aber die Vorteile der traditionellen Heilkunst nicht außer Acht l{\"a}sst. Es handelt sich um ein Therapieprodukt f{\"u}r fasziale Verklebungen und Muskel-Skelett-Erkrankungen. Mit Yocu bekommen Nutzer die M{\"o}glichkeit, sich selbst erfolgreich pr{\"a}ventiv oder bei Beschwerden zu behandeln. Das k{\"o}nnte nicht nur die k{\"o}rperliche Gesundheit f{\"o}rdern, sondern auch das Gesp{\"u}r f{\"u}r den eigenen K{\"o}rper. Seine k{\"o}rperlichen Bed{\"u}rfnisse besser einsch{\"a}tzen zu k{\"o}nnen und in der Lage zu sein, diese zu erf{\"u}llen, stellt das Ziel des Konzepts dar. Mit dem gew{\"a}hlten „Healthtech" Ansatz soll der Zugang zur Selbsttherapie f{\"u}r Laien erm{\"o}glicht werden. Zus{\"a}tzlich k{\"o}nnte das Konzept die Arbeit f{\"u}r Physiotherapeut:innen und Fitnesstrainer:innen erleichtern. Durch die Symbiose eines elektronischen Therapieproduktes mit einer Anwendungsapp ist die Behandlung punktgenau steuerbar und basiert nicht mehr ausschließlich auf Gef{\"u}hl oder Erfahrung. Durch die Einsicht aller wichtigen Parameter, wird das Verst{\"a}ndnis der Therapiemethode gef{\"o}rdert und Vertrauen hinsichtlich des Produkts geschaffen.}, language = {de} } @masterthesis{Schrey2021, type = {Bachelor Thesis}, author = {Schrey, Leander}, title = {Less Waste Shelf: Ein M{\"o}bel zur Reduzierung der h{\"a}uslich anfallenden Lebensmittelabf{\"a}lle}, publisher = {FH Aachen}, address = {Aachen}, pages = {177 Seiten}, year = {2021}, abstract = {Mit dem Projekt wird sich dem Problem der weltweiten Lebensmittelverschwendung angenommen und versucht Abf{\"a}lle in Privathaushalten prim{\"a}r industrialisierter Staaten zu reduzieren. Mit j{\"a}hrlich 1,3 Milliarden Tonnen landet circa ein Drittel aller weltweit produzierten Lebensmittel im M{\"u}ll. Einen Großteil dieser Abf{\"a}lle ist vermeidbar, besonders dort, wo man im {\"U}berfluss lebt. Das konzipierte M{\"o}belst{\"u}ck soll die Lagerungsm{\"o}glichkeiten des Nutzers optimieren und somit f{\"u}r die Wertsch{\"a}tzung von Lebensmitteln sensibilisieren. F{\"u}r das M{\"o}belst{\"u}ck werden ausschließlich nat{\"u}rliche Materialien verwendet, welche in ihrer Charakteristik optimal zum Funktionsumfang passen, der f{\"u}r die Lagerung ben{\"o}tigt wird. Das Material Terracotta erm{\"o}glicht es, mittels Verdunstungsk{\"u}hlung stromlos Gem{\"u}se kalt zu halten. Antibakterielles Holz t{\"o}tet sch{\"a}dliche Bakterien ab. Die Konstruktion erm{\"o}glicht somit eine fachgerechte Lebensmittelagerung und erm{\"o}glicht sowohl sehr flexible Nutzung, wie auch leichte Reparatur.}, language = {de} } @masterthesis{MeinersSchneider2021, type = {Bachelor Thesis}, author = {Meiners, Sonja and Schneider, Sophie}, title = {MULO - Multifunktionale Objekte: Eine Serie multifunktionaler Wohnobjekte}, publisher = {FH Aachen}, address = {Aachen}, pages = {137 Seiten}, year = {2021}, abstract = {Mit MULO wurde eine Serie multifunktionaler Objekte f{\"u}r den Wohnbereich entworfen. In Zeiten des {\"U}berangebots und des st{\"a}ndigen Wohnraumwechsels soll der Nutzer dieser Objekte mit einem modernen und schlichten Design unterst{\"u}tzt werden, das zu jedem Anlass passt. Die minimalistische {\"A}sthetik mit hohem Komfort orientiert sich dabei an den Bed{\"u}rfnissen des Endverbrauchers. Als Verwandlungsk{\"u}nstler bereichert MULO jeden Wohnraum. Die gesamte Serie ist unter der Ber{\"u}cksichtigung der schnelllebigen und sich wandelnden Welt entworfen worden. Mit multifunktionalen Objekten ist das Produkt den flexiblen Anforderungen und Bed{\"u}rfnissen des Menschen gewachsen. Die Bereiche Wohnen, Leben, Arbeiten, Schlafen und Entspannen werden durch das Sofa- , das Tisch- und das Keramik-System optimal abgedeckt. Durch die Verwendung von nachhaltigen und recycelbaren Materialien, setzt MULO ein kleines Statement und hinterl{\"a}sst nachhaltig Eindruck.}, language = {de} } @masterthesis{Zaunbrecher2021, type = {Bachelor Thesis}, author = {Zaunbrecher, Fabienne}, title = {Living Spaces - By OASE: Konzeption eines Flagship-Stores mit Wohlf{\"u}hl- und Erlebnis-Spaces}, publisher = {FH Aachen}, address = {Aachen}, pages = {175 Seiten}, year = {2021}, abstract = {Konzeption eines Flagship-Stores mit Wohlf{\"u}hl- und Erlebnis-Spaces Die Bed{\"u}rfnisse von Besuchern und Kunden eines Gesch{\"a}fts haben sich {\"u}ber die letzten Jahre stark ver{\"a}ndert. Sie m{\"o}chten das ihr Kauf zum Erlebnis wird. Auf Basis dieser Erkenntnis wurde im Rahmen dieser Arbeit zusammen mit den Produkten des Weltmarktf{\"u}hrers f{\"u}r Teichtechnik und Aquaristik „OASE - Living Water" ein Storekonzept geschaffen. Dieses verbindet den Verkaufsraum mit unterschiedlichen Erlebniswelten, welche auf die jeweilig ausgestellte Produktkategorie abgestimmt sind. Zus{\"a}tzlich er{\"o}ffnet ein diverser und aufregend gestalteter Gartenbereich der zum Entspannen und Verweilen einl{\"a}dt. Der herausstechende Aspekt des Konzepts ist, dass die Produkte sowohl als reines Produkt, als auch in verbauter Version in Aktion zu sehen sind. Auf diese Art bietet die Marke „OASE - Living Water" ein neues Kauf-Erlebnis an.}, language = {de} } @masterthesis{Thomaschik2021, type = {Bachelor Thesis}, author = {Thomaschik, Annika}, title = {Medical Design for Kids: Integration der Bed{\"u}rfnisse von Kindern in medizinische Produkte}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {122 Seiten}, year = {2021}, abstract = {Kinder im Kontext von medizinischen Einrichtungen. Kinder sind keine kleinen Erwachsenen und erfordern einen auf sie angepassten Zugang zu medizinischen Behandlungsabl{\"a}ufen. Das Konzept basiert auf dem Gestaltungsprinzip des „Child Centered Design" mit Befragungen von Experten der P{\"a}diatrie und Forschung sowie mit enger Zusammenarbeit mit Kindern. Entstanden ist ein Produkt welches Skepsis und Angst junger Patienten im Alter von 6 bis 14 Jahren bei station{\"a}ren Aufenthalten in Krankenh{\"a}usern mindert und ihren Heilungsprozess positiv unterst{\"u}tzt. Unter Einbezug von digitalen M{\"o}glichkeiten wie Augmented Reality erkl{\"a}rt „ViU", ein Krankenhaus-Companion in Eulen-Optik, den kleinen Patienten Funktionen und das Wirken verschiedenster medizinischer Ger{\"a}te und Behandlungen. So wird nicht nur der Rate an Traumata durch Krankenhausaufenthalte bei Kindern entgegengewirkt, sondern auch das Krankenhauspersonal im Umgang mit Kindern im Klinikalltag entlastet.}, language = {de} } @masterthesis{Dressen2021, type = {Bachelor Thesis}, author = {Dreßen, Samira}, title = {Teach and Learn-Platform: eine Applikation f{\"u}r Bildungseinrichtungen, Sch{\"u}ler und Studenten}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {198 Seiten}, year = {2021}, abstract = {Die Applikation „Slot" ist eine lehrbegleitende Kommunikations- und Kooperationsplattform, die eine zeitgem{\"a}ße Lehre, Studienorganisation und Pr{\"a}sentation zul{\"a}sst. Slot dient dabei nicht nur als Hilfestellung f{\"u}r Lehrende und Lernende, sondern erm{\"o}glicht auch die vollst{\"a}ndige Durchf{\"u}hrung von effizientem Unterricht. Den Lernenden soll maximale Kontrolle zur Erarbeitung ihres Wissens und {\"U}bersichtlichkeit in der Kommunikation geboten werden. Um f{\"u}r die unterschiedlichen Nutzergruppen ein benutzerfreundliches System zu schaffen, steht eine breitgef{\"a}cherte Funktionsauswahl zur Verf{\"u}gung: Videochat, Messenger, VR-Raum, Whiteboard, Aufgaben{\"u}bersicht, Datenabgabe, Kalender, Profil und ToDo-List. Die Nutzungsm{\"o}glichkeiten k{\"o}nnen individuell auf die unterschiedlichen Nutzergruppen und deren entsprechenden Bed{\"u}rfnissen angepasst werden.}, language = {de} } @masterthesis{Heinrichs2021, type = {Bachelor Thesis}, author = {Heinrichs, Lars}, title = {!MPFEN: Eine informative Kampagne, die zum Impfen motiviert}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {58 Seiten}, year = {2021}, abstract = {Eine Kampagne, die darauf ausgerichtet ist, die Bev{\"o}lkerung auf sozialer Ebene aufzurufen, Impf-Skeptiker aufzukl{\"a}ren und von Impfungen zu {\"u}berzeugen. Anhand von offiziellen Statistiken, die optisch ansprechend aufbereitet wurden, werden die Menschen {\"u}ber Krankheiten und dazu geh{\"o}rige Risiken informiert. Des Weiteren wird der Impferfolg grafisch dokumentiert und leicht verst{\"a}ndlich pr{\"a}sentiert, ohne Fakten auszulassen. Durch eine Serie Plakate verschiedener Formate werden die Betrachter animiert, die Homepage impfen.info aufzusuchen und das reichhaltige Informationsangebot zu nutzen. Mithilfe einer am{\"u}santen Postkartenreihe wird die Verbreitung von Krankheitserregern simuliert und postalisch in die Haushalte der Impfgegner- und Skeptiker gebracht, um zu verdeutlichen, wie rasant Viren sich verbreiten und wie wichtig es ist, sich und seine Lieben zu sch{\"u}tzen.}, language = {de} } @masterthesis{Franken2021, type = {Bachelor Thesis}, author = {Franken, Florian}, title = {Zeitfenster: Eine Dorfgeschichte aus Bildcollagen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {113 Seiten}, year = {2021}, abstract = {Die Zeit befindet sich im st{\"a}ndigen Wandel. Mit ihr verbindet man Zukunft, Vergangenheit und Gegenwart. Letzteres pr{\"a}gt das jetzige Dasein. Der Zeitwandel ist ein Prozess, {\"u}ber den wir uns meist erst nach Jahren bewusstwerden. Besonders, wenn man das Dorf, in welchem man aufgewachsen ist, n{\"a}her betrachtet, f{\"a}llt einem auf, was sich im Laufe der Jahre architektonisch oder infrastrukturell ver{\"a}ndert hat. So stellt sich die Frage, wie das Dorf im letzten Jahrhundert ausgesehen hat. Wie sah es vor, w{\"a}hrend und nach den beiden Weltkriegen aus? Wie war das Dorfleben in der Zwischenkriegszeit? Was hat sich im letzten Jahrhundert ver{\"a}ndert? Diese Arbeit zeigt den Wandel der Zeit, kombiniert aus Vergangenheit und Gegenwart. Damalige Aufnahmeorte wurden erneut aufgesucht, die Fotos aus der gleichen Position wurden neu abgelichtet und miteinander kombiniert.}, language = {de} } @masterthesis{Ernst2021, type = {Bachelor Thesis}, author = {Ernst, Loredana}, title = {Let´s change fashion!: Eine Image-Kampagne der Fair Wear Foundation f{\"u}r faire und nachhaltige Mode.}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {61 Seiten}, year = {2021}, abstract = {Fast Fashion-Ketten beherrschen die Modewelt. Doch einige Unternehmen, Siegel und Stiftungen versuchen die Textilindustrie neu umzugestalten. Um die Modeindustrie nachhaltig zu ver{\"a}ndern, m{\"u}ssen allerdings auch den Kunden die schlechten Arbeitsbedingungen und die negativen Einfl{\"u}sse der Textilbranche auf die Umwelt bewusst werden. Das konkrete Ziel der erstellten Kampagne ist es, modebewusste Menschen davon zu {\"u}berzeugen Fast Fashion hinter sich zu lassen. Es soll also ein Umdenken bei den Konsumenten stattfinden. Die Fair Wear Foundation und ihre Mitglieder vertreten die Vision, dass Mode auch fair und nachhaltig sein kann. Genau diese Vision soll mit der Kampagne vermittelt und an die Konsumenten weitergetragen werden.}, language = {de} } @masterthesis{Kausen2021, type = {Bachelor Thesis}, author = {Kausen, Catharina Marie}, title = {Transmission: Ein animiertes Musikvideo illustriert die Liebe und Verbindung zum Genre Techno}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {88 Seiten}, year = {2021}, abstract = {Techno ist seit seiner Entstehung mehr als ein Musik-Genre. Es ist ein Lebensgef{\"u}hl und eine Bewegung. Techno-Partys dienen vielen Menschen als Ventil, um die Sorgen des Alltags f{\"u}r eine Nacht vergessen zu k{\"o}nnen. „Transmission" portr{\"a}tiert anhand der Protagonistin die pers{\"o}nliche Beziehung zum Genre Techno. Das Musikvideo soll die Zuschauenden visuell anregen und mitreißen. Es bietet ihnen die M{\"o}glichkeit, sich selbst wieder erkennen zu k{\"o}nnen und soll Außenstehenden einen Einblick in die Techno-Szene erm{\"o}glichen. Mithilfe des Rotoskopie-Verfahrens konnte ein realistischer Animationsstil erreicht werden, welcher durch eine unrealistische Farbgebung der Charaktere gebrochen wird. Der Schwerpunkt der Bachelorarbeit liegt in der kreativ-gestalterischen Ausarbeitung. Die Musikvideo „Transmission" vermittelt das „Lebensgef{\"u}hl Techno" visuell anregend und nachvollziehbar.}, language = {de} } @masterthesis{Jonas2021, type = {Bachelor Thesis}, author = {Jonas, Eva Johanna}, title = {The future of work: How to create a better User Experience for distributed workforce}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {213 Seiten}, year = {2021}, abstract = {Die Nachfrage nach flexiblen Arbeitsmodellen und damit Remote Work steigt und wird zunehmend zum Kriterium bei der Jobauswahl. Trotz der vielen Vorteile gibt es in der „Remote-Arbeitswelt" aber immer noch einige Herausforderungen. Remote Arbeitende haben eine andere, teils nachteilige Erfahrung gegen{\"u}ber Kollegen vor Ort. Um daf{\"u}r eine nutzerzentrierte L{\"o}sung zu finden, lag der Fokus bei dieser Arbeit auf den Auswirkungen und Bed{\"u}rfnissen des arbeitenden Menschen. Basierend hierauf wurde ein Dienstleistungsservice konzipiert. Dieser unterst{\"u}tzt Unternehmen, Selbstst{\"a}ndige und Mitarbeitende durch passende Angebote und Dienstleistungen in den Bereichen Ausstattung, Technik, Gesundheit, Corporate Benefits u.{\"A}. Dies erm{\"o}glicht auch Arbeitgebenden Aufgaben auszulagern und die Attraktivit{\"a}t und Konkurrenzf{\"a}higkeit auf dem Arbeitsmarkt zu steigern. Das wird zuk{\"u}nftig im „war for digitals talents" immer wichtiger werden.}, language = {de} } @masterthesis{Kemmerling2021, type = {Bachelor Thesis}, author = {Kemmerling, Kristin}, title = {Zeitreisen: Interaktiv erlebbarer Raum zur Vermittlung von historischem Wissen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {60 Seiten}, year = {2021}, abstract = {Das Ziel des Konzeptes ist eine virtuelle personalisierte „Zeitreise" f{\"u}r die Besucher*innen zu gestalten. Die Ausstellung l{\"a}sst die Besucher*innen in ein vergangenes Zeitszenario eintauchen. Sie erleben und erkunden mit Hilfe von Computertechniken historische Ereignisse, w{\"a}hrend sie gleichzeitig n{\"u}tzliches Wissen vermittelt bekommen. Die Ausstellung besteht aus einer inszenierten interaktiven Raum-Installation mit 360 Grad Projektionen. Das 360 Grad Panorama erlaubt den Besucher*innen eine neue Art der Wahrnehmung von historischen Ereignissen. Alle Besucher*innen bekommen zu Beginn der Tour ein Smart Device (Tablet) mit einem vor installierten Benutzer Guide ausgeh{\"a}ndigt. Die Anwendungen sind Schritt f{\"u}r Schritt im Guide veranschaulicht und leicht anzuwenden. Sprachen, Schriften, Display Gr{\"o}ßen k{\"o}nnen jederzeit ge{\"a}ndert und Hilfe angefordert werden. Damit wird die Ausstellung barrierefrei. Mit Hilfe des neuen Benutzer Guides Systems sind alle Besucher*innen in der Lage vor der Tour eine kurze „Personalisierung" durchzuf{\"u}hren. Somit wird auf Basis der Interessenfelder eine individuelle „Zeitreise „ erm{\"o}glicht. Die dargestellten Szenarien k{\"o}nnen u.a. zwischen den historischen Maya Tempelruinen, Pyramiden, historischen Mythen, wie dem legend{\"a}ren Bernsteinzimmer variieren. Mit diesem Konzept ist es m{\"o}glich, l{\"a}ngst vergessene und zerst{\"o}rte Zeitszenarien zu rekonstruieren und diese mit Hilfe von Virtual Reality- und Augmented Reality Elementen interaktiv zu gestalten.}, language = {de} } @masterthesis{Koc2021, type = {Bachelor Thesis}, author = {Koc, {\"O}zge Fethiye}, title = {OFEKO: Lehrmaterial f{\"u}r sehbehinderte Kinder}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {117 Seiten}, year = {2021}, abstract = {In einer Mischklasse, bestehend aus sehenden und nicht-sehenden Kindern, welche nicht schriftlich oder spielerisch miteinander kommunizieren k{\"o}nnen, gehen einige soziale Aspekte und Lern{\"u}bungen verloren. Partnerarbeiten und das gegenseitige Kontrollieren der Richtigkeit, beispielsweise bei der Anwendung von Satzzeichen, sind M{\"o}glichkeiten, welche die Kinder ohne ein gemeinsames Material nicht wahrnehmen k{\"o}nnen. Diese Arbeit erm{\"o}glicht ein gemeinsames Arbeiten aller Kinder durch dasselbe Material. Hierf{\"u}r dienen dreidimensionale Objekte, welche im STL-Dateiformat zur Verf{\"u}gung stehen. Es eignet sich f{\"u}r schriftliche und geografische Arbeiten. Des Weiteren ist ein Memory-Spiel enthalten, welches ebenso von sehenden und nicht-sehenden Kinder gespielt werden kann. Diese STLs k{\"o}nnen weltweit verschickt werden, sodass diese beliebig mit einem 3D-Drucker gedruckt werden k{\"o}nnen.}, language = {de} } @masterthesis{Kiutsukis2021, type = {Bachelor Thesis}, author = {Kiutsukis, Maria}, title = {KOMU: Entwicklung eines modularen Regalsystems}, publisher = {FH Aachen}, address = {Aachen}, pages = {213 Seiten}, year = {2021}, abstract = {KOMU entstand durch Analysieren der Ver{\"a}nderungen, die mit der Urbanisierung einhergehen - schnell schwindender Wohnraum, h{\"a}ufiges Umziehen und verschmolzene Raumnutzung. KOMU ist ein modulares Regalsystem, das erm{\"o}glicht, problemlos aus denselben Bestandteilen immer wieder verschiedene Wohn- und Raumsituationen zu schaffen. Das System ist komplett werkzeugfrei durch simples Ineinanderstecken aufzubauen. Weitere Add-Ons k{\"o}nnen {\"u}ber das gleiche Stecksystem in das Regal integriert werden, damit es perfekt an die Bed{\"u}rfnisse des Kunden anpasst werden kann. Durch klare Linien und eine cleane Designsprache f{\"u}gt sich KOMU nahtlos in seine Umgebung ein und hilft, eine f{\"u}r den Kunden ideale Umgebung zu schaffen. Ein Regal, das mitw{\"a}chst - vielf{\"a}ltig und individuell.}, language = {de} } @masterthesis{Khalaimova2021, type = {Bachelor Thesis}, author = {Khalaimova, Karina}, title = {Neuerfindung der Ligaturen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {43 Seiten}, year = {2021}, abstract = {Gegenstand des Projekts ist, Ligaturen als erweiterte Mittel der Informations{\"u}bertragung einzusetzen. Ligaturen als zus{\"a}tzliches Instrument sollen die visuelle Komponente des Textes unterst{\"u}tzen, ihm die gewisse Frische einhauchen und ihn hiermit insgesamt sichtbarer, origineller und moderner machen. Der Einsatzbereich erstreckt sich hierbei in die verschiedensten Bereiche hin {\"u}ber Design und Werbung, als auch im Handel oder in sozialen Bereichen. Hierbei kann eine große Anzahl an W{\"o}rtern neue Formen annehmen und mithin an neuem Leben und Bedeutung gewinnen, was sicherlich die allgemeinen Sprachmittel bereichern wird. Auf einer historischen Basis und mit Hilfe der Dekonstruktion wurden neue Formen der Ligaturen geschaffen — seltsame, kontroverse, auff{\"a}llige und einzigartige.}, language = {de} } @masterthesis{Kober2021, type = {Bachelor Thesis}, author = {Kober, Sophie}, title = {DO or DIE: Leistungssport}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {81 Seiten}, year = {2021}, abstract = {Es ist dieser eine Moment, der {\"u}ber Versagen oder Erfolg entscheidet. Dieser Augenblick, der so unfassbar wichtig ist und dennoch nicht mal eine Sekunde dauert. Als Leistungssportler bereitet man sich immer und immer wieder auf diesen einen Moment vor. Wie unterscheidet sich dieser Moment in verschiedenen Sportarten? Gibt es ihn {\"u}berhaupt in jeder Sportart? Das Projekt „Do or Die" fokussiert sich auf entscheidende und wichtige Situationen in unterschiedlichen Sportarten und zeigt dabei die Facetten und Vielseitigkeit des Leistungssports auf. In einem besonderen Konzept wird der Fokus auf genau diese Momente gelegt und greift den Aspekt des Scheiterns und Erfolgs auf. Es wird untersucht, wie sichtbar diese Augenblicke nach außen hin sind oder inwiefern entscheidende Momente auch nur im Kopf stattfinden und durch Emotionen zu erkennen sind.}, language = {de} } @article{BrockhausBehbahaniMurisetal.2021, author = {Brockhaus, Moritz K. and Behbahani, Mehdi and Muris, Farina and Jansen, Sebastian V. and Schmitz-Rode, Thomas and Steinseifer, Ulrich and Clauser, Johanna C.}, title = {In vitro thrombogenicity testing of pulsatile mechanical circulatory support systems: Design and proof-of-concept}, series = {Artificial Organs}, volume = {45}, journal = {Artificial Organs}, number = {12}, publisher = {Wiley}, address = {Weinheim}, issn = {1525-1594}, doi = {10.1111/aor.14046}, pages = {1513 -- 1521}, year = {2021}, abstract = {Thrombogenic complications are a main issue in mechanical circulatory support (MCS). There is no validated in vitro method available to quantitatively assess the thrombogenic performance of pulsatile MCS devices under realistic hemodynamic conditions. The aim of this study is to propose a method to evaluate the thrombogenic potential of new designs without the use of complex in-vivo trials. This study presents a novel in vitro method for reproducible thrombogenicity testing of pulsatile MCS systems using low molecular weight heparinized porcine blood. Blood parameters are continuously measured with full blood thromboelastometry (ROTEM; EXTEM, FIBTEM and a custom-made analysis HEPNATEM). Thrombus formation is optically observed after four hours of testing. The results of three experiments are presented each with two parallel loops. The area of thrombus formation inside the MCS device was reproducible. The implantation of a filter inside the loop catches embolizing thrombi without a measurable increase of platelet activation, allowing conclusions of the place of origin of thrombi inside the device. EXTEM and FIBTEM parameters such as clotting velocity (α) and maximum clot firmness (MCF) show a total decrease by around 6\% with a characteristic kink after 180 minutes. HEPNATEM α and MCF rise within the first 180 minutes indicate a continuously increasing activation level of coagulation. After 180 minutes, the consumption of clotting factors prevails, resulting in a decrease of α and MCF. With the designed mock loop and the presented protocol we are able to identify thrombogenic hot spots inside a pulsatile pump and characterize their thrombogenic potential.}, language = {en} } @inproceedings{ChajanSchulteTiggesRekeetal.2021, author = {Chajan, Eduard and Schulte-Tigges, Joschua and Reke, Michael and Ferrein, Alexander and Matheis, Dominik and Walter, Thomas}, title = {GPU based model-predictive path control for self-driving vehicles}, series = {IEEE Intelligent Vehicles Symposium (IV)}, booktitle = {IEEE Intelligent Vehicles Symposium (IV)}, publisher = {IEEE}, address = {New York, NY}, isbn = {978-1-7281-5394-0}, doi = {10.1109/IV48863.2021.9575619}, pages = {1243 -- 1248}, year = {2021}, abstract = {One central challenge for self-driving cars is a proper path-planning. Once a trajectory has been found, the next challenge is to accurately and safely follow the precalculated path. The model-predictive controller (MPC) is a common approach for the lateral control of autonomous vehicles. The MPC uses a vehicle dynamics model to predict the future states of the vehicle for a given prediction horizon. However, in order to achieve real-time path control, the computational load is usually large, which leads to short prediction horizons. To deal with the computational load, the control algorithm can be parallelized on the graphics processing unit (GPU). In contrast to the widely used stochastic methods, in this paper we propose a deterministic approach based on grid search. Our approach focuses on systematically discovering the search area with different levels of granularity. To achieve this, we split the optimization algorithm into multiple iterations. The best sequence of each iteration is then used as an initial solution to the next iteration. The granularity increases, resulting in smooth and predictable steering angle sequences. We present a novel GPU-based algorithm and show its accuracy and realtime abilities with a number of real-world experiments.}, language = {en} } @article{StaeudleSeynnesLapsetal.2021, author = {St{\"a}udle, Benjamin and Seynnes, Olivier and Laps, Guido and G{\"o}ll, Fabian and Br{\"u}ggemann, Gert-Peter and Albracht, Kirsten}, title = {Recovery from achilles tendon repair: a combination of Postsurgery Outcomes and Insufficient remodeling of muscle and tendon}, series = {Medicine \& Science in Sports \& Exercise}, volume = {53}, journal = {Medicine \& Science in Sports \& Exercise}, number = {7}, publisher = {American College of Sports Medicine}, address = {Philadelphia, Pa.}, issn = {1530-0315}, doi = {10.1249/MSS.0000000000002592}, pages = {1356 -- 1366}, year = {2021}, abstract = {Achilles tendon rupture (ATR) patients have persistent functional deficits in the triceps surae muscle-tendon unit (MTU). The complex remodeling of the MTU accompanying these deficits remains poorly understood. The purpose of the present study was to associate in vivo and in silico data to investigate the relations between changes inMTU properties and strength deficits inATR patients. Methods: Elevenmale subjects who had undergone surgical repair of complete unilateral ATR were examined 4.6 ± 2.0 (mean ± SD) yr after rupture. Gastrocnemius medialis (GM) tendon stiffness, morphology, and muscle architecture were determined using ultrasonography. The force-length relation of the plantar flexor muscles was assessed at five ankle joint angles. In addition, simulations (OpenSim) of the GM MTU force-length properties were performed with various iterations of MTU properties found between the unaffected and the affected side. Results: The affected side of the patients displayed a longer, larger, and stiffer GM tendon (13\% ± 10\%, 105\% ± 28\%, and 54\% ± 24\%, respectively) compared with the unaffected side. The GM muscle fascicles of the affected side were shorter (32\% ± 12\%) and with greater pennation angles (31\% ± 26\%). A mean deficit in plantarflexion moment of 31\% ± 10\% was measured. Simulations indicate that pairing an intact muscle with a longer tendon shifts the optimal angular range of peak force outside physiological angular ranges, whereas the shorter muscle fascicles and tendon stiffening seen in the affected side decrease this shift, albeit incompletely. Conclusions: These results suggest that the substantial changes in MTU properties found in ATR patients may partly result from compensatory remodeling, although this process appears insufficient to fully restore muscle function.}, language = {en} } @article{SaretzkiBergmannDahmannetal.2021, author = {Saretzki, Charlotte and Bergmann, Ole and Dahmann, Peter and Janser, Frank and Keimer, Jona and Machado, Patricia and Morrison, Audry and Page, Henry and Pluta, Emil and St{\"u}bing, Felix and K{\"u}pper, Thomas}, title = {Are small airplanes safe with regards to COVID-19 transmission?}, series = {Journal of Travel Medicine}, volume = {28}, journal = {Journal of Travel Medicine}, number = {7}, publisher = {Oxford University Press}, address = {Oxford}, issn = {1708-8305}, doi = {10.1093/jtm/taab105}, year = {2021}, language = {en} } @inproceedings{PfeifferBalcGebhardt2021, author = {Pfeiffer, Johann and Balc, Nicolae and Gebhardt, Andreas}, title = {Studie zur Untersuchung der Auswirkung von Fr{\"a}sbahnstrategien auf die Oberfl{\"a}chenqualit{\"a}t von mittels SLM gefertigten Metallteilen}, series = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz}, booktitle = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz}, publisher = {Verlag Ernst-Abbe-Hochschule Jena}, address = {Jena}, isbn = {978-3-932886-36-2}, pages = {99 -- 102}, year = {2021}, abstract = {F{\"u}r die Herstellung von metallischen Bauteilen wird in der heutigen Zeit eine Vielzahl von Verfahren auf dem Markt angeboten. Dabei stehen die additiven im Wettbewerb zu den konventionellen Verfahren. Die erreichbaren Oberfl{\"a}chenqualit{\"a}ten der additiven sind nicht mit denen spanender Verfahren vergleichbar. F{\"u}r diesen Beitrag wurde analysiert, ob sich ein mittels Selektivem Laserschmelzen (SLM) additiv hergestellter Edelstahl hinsichtlich seiner Oberfl{\"a}chenqualit{\"a}t nach der Zerspanung von einem umgeformten konventionell hergestellten Edelstahl gleicher Sorte unterscheidet.}, language = {de} } @article{BallVoegeleGrajewskietal.2021, author = {Ball, Christopher Stephen and V{\"o}gele, Stefan and Grajewski, Matthias and Kuckshinrichs, Wilhelm}, title = {E-mobility from a multi-actor point of view: Uncertainties and their impacts}, series = {Technological Forecasting and Social Change}, volume = {170}, journal = {Technological Forecasting and Social Change}, number = {Art. 120925}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {0040-1625}, doi = {10.1016/j.techfore.2021.120925}, year = {2021}, language = {en} } @article{AbbasBalcBremenetal.2022, author = {Abbas, Karim and Balc, Nicolae and Bremen, Sebastian and Skupin, Marco}, title = {Crystallization and aging behavior of polyetheretherketone PEEK within rapid tooling and rubber molding}, series = {Journal of Manufacturing and Materials Processing}, volume = {6}, journal = {Journal of Manufacturing and Materials Processing}, number = {5}, publisher = {MDPI}, address = {Basel}, issn = {2504-4494}, doi = {10.3390/jmmp6050093}, pages = {1 -- 12}, year = {2022}, abstract = {In times of short product life cycles, additive manufacturing and rapid tooling are important methods to make tool development and manufacturing more efficient. High-performance polymers are the key to mold production for prototypes and small series. However, the high temperatures during vulcanization injection molding cause thermal aging and can impair service life. The extent to which the thermal stress over the entire process chain stresses the material and whether it leads to irreversible material aging is evaluated. To this end, a mold made of PEEK is fabricated using fused filament fabrication and examined for its potential application. The mold is heated to 200 ◦C, filled with rubber, and cured. A differential scanning calorimetry analysis of each process step illustrates the crystallization behavior and first indicates the material resistance. It shows distinct cold crystallization regions at a build chamber temperature of 90 ◦C. At an ambient temperature above Tg, crystallization of 30\% is achieved, and cold crystallization no longer occurs. Additional tensile tests show a decrease in tensile strength after ten days of thermal aging. The steady decrease in recrystallization temperature indicates degradation of the additives. However, the tensile tests reveal steady embrittlement of the material due to increasing crosslinking.}, language = {en} } @article{FunkeBeckmann2022, author = {Funke, Harald and Beckmann, Nils}, title = {Flexible fuel operation of a Dry-Low-NOx Micromix Combustor with Variable Hydrogen Methane Mixture}, series = {International Journal of Gas Turbine, Propulsion and Power Systems}, volume = {13}, journal = {International Journal of Gas Turbine, Propulsion and Power Systems}, number = {2}, issn = {1882-5079}, pages = {1 -- 7}, year = {2022}, abstract = {The role of hydrogen (H2) as a carbon-free energy carrier is discussed since decades for reducing greenhouse gas emissions. As bridge technology towards a hydrogen-based energy supply, fuel mixtures of natural gas or methane (CH4) and hydrogen are possible. The paper presents the first test results of a low-emission Micromix combustor designed for flexible-fuel operation with variable H2/CH4 mixtures. The numerical and experimental approach for considering variable fuel mixtures instead of recently investigated pure hydrogen is described. In the experimental studies, a first generation FuelFlex Micromix combustor geometry is tested at atmospheric pressure at gas turbine operating conditions corresponding to part- and full-load. The H2/CH4 fuel mixture composition is varied between 57 and 100 vol.\% hydrogen content. Despite the challenges flexible-fuel operation poses onto the design of a combustion system, the evaluated FuelFlex Micromix prototype shows a significant low NOx performance}, language = {en} } @article{MarinkovicButenweg2022, author = {Marinkovic, Marko and Butenweg, Christoph}, title = {Numerical analysis of the in-plane behaviour of decoupled masonry infilled RC frames}, series = {Engineering Structures}, volume = {272}, journal = {Engineering Structures}, number = {1}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0141-0296}, doi = {10.1016/j.engstruct.2022.114959}, pages = {18 Seiten}, year = {2022}, abstract = {Damage of reinforced concrete (RC) frames with masonry infill walls has been observed after many earthquakes. Brittle behaviour of the masonry infills in combination with the ductile behaviour of the RC frames makes infill walls prone to damage during earthquakes. Interstory deformations lead to an interaction between the infill and the RC frame, which affects the structural response. The result of this interaction is significant damage to the infill wall and sometimes to the surrounding structural system too. In most design codes, infill walls are considered as non-structural elements and neglected in the design process, because taking into account the infills and considering the interaction between frame and infill in software packages can be complicated and impractical. A good way to avoid negative aspects arising from this behavior is to ensure no or low-interaction of the frame and infill wall, for instance by decoupling the infill from the frame. This paper presents the numerical study performed to investigate new connection system called INODIS (Innovative Decoupled Infill System) for decoupling infill walls from surrounding frame with the aim to postpone infill activation to high interstory drifts thus reducing infill/frame interaction and minimizing damage to both infills and frames. The experimental results are first used for calibration and validation of the numerical model, which is then employed for investigating the influence of the material parameters as well as infill's and frame's geometry on the in-plane behaviour of the infilled frames with the INODIS system. For all the investigated situations, simulation results show significant improvements in behaviour for decoupled infilled RC frames in comparison to the traditionally infilled frames.}, language = {en} } @inproceedings{BurgethKleefeldZhangetal.2022, author = {Burgeth, Bernhard and Kleefeld, Andreas and Zhang, Eugene and Zhang, Yue}, title = {Towards Topological Analysis of Non-symmetric Tensor Fields via Complexification}, series = {Discrete Geometry and Mathematical Morphology}, booktitle = {Discrete Geometry and Mathematical Morphology}, editor = {Baudrier, {\´E}tienne and Naegel, Beno{\^i}t and Kr{\"a}henb{\"u}hl, Adrien and Tajine, Mohamed}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-19897-7}, doi = {10.1007/978-3-031-19897-7_5}, pages = {48 -- 59}, year = {2022}, abstract = {Fields of asymmetric tensors play an important role in many applications such as medical imaging (diffusion tensor magnetic resonance imaging), physics, and civil engineering (for example Cauchy-Green-deformation tensor, strain tensor with local rotations, etc.). However, such asymmetric tensors are usually symmetrized and then further processed. Using this procedure results in a loss of information. A new method for the processing of asymmetric tensor fields is proposed restricting our attention to tensors of second-order given by a 2x2 array or matrix with real entries. This is achieved by a transformation resulting in Hermitian matrices that have an eigendecomposition similar to symmetric matrices. With this new idea numerical results for real-world data arising from a deformation of an object by external forces are given. It is shown that the asymmetric part indeed contains valuable information.}, language = {en} } @article{RuebbelkeVoegeleGrajewskietal.2022, author = {R{\"u}bbelke, Dirk and V{\"o}gele, Stefan and Grajewski, Matthias and Zobel, Luzy}, title = {Hydrogen-based steel production and global climate protection: An empirical analysis of the potential role of a European cross border adjustment mechanism}, series = {Journal of Cleaner Production}, volume = {380}, journal = {Journal of Cleaner Production}, number = {Part 2, Art. Nr.:135040}, publisher = {Elsevier}, issn = {0959-6526}, doi = {10.1016/j.jclepro.2022.135040}, year = {2022}, abstract = {The European Union's aim to become climate neutral by 2050 necessitates ambitious efforts to reduce carbon emissions. Large reductions can be attained particularly in energy intensive sectors like iron and steel. In order to prevent the relocation of such industries outside the EU in the course of tightening environmental regulations, the establishment of a climate club jointly with other large emitters and alternatively the unilateral implementation of an international cross-border carbon tax mechanism are proposed. This article focuses on the latter option choosing the steel sector as an example. In particular, we investigate the financial conditions under which a European cross border mechanism is capable to protect hydrogen-based steel production routes employed in Europe against more polluting competition from abroad. By using a floor price model, we assess the competitiveness of different steel production routes in selected countries. We evaluate the climate friendliness of steel production on the basis of specific GHG emissions. In addition, we utilize an input-output price model. It enables us to assess impacts of rising cost of steel production on commodities using steel as intermediates. Our results raise concerns that a cross-border tax mechanism will not suffice to bring about competitiveness of hydrogen-based steel production in Europe because the cost tends to remain higher than the cost of steel production in e.g. China. Steel is a classic example for a good used mainly as intermediate for other products. Therefore, a cross-border tax mechanism for steel will increase the price of products produced in the EU that require steel as an input. This can in turn adversely affect competitiveness of these sectors. Hence, the effects of higher steel costs on European exports should be borne in mind and could require the cross-border adjustment mechanism to also subsidize exports.}, language = {en} } @inproceedings{MahdiDerschSchmitzetal.2022, author = {Mahdi, Zahra and Dersch, J{\"u}rgen and Schmitz, Pascal and Dieckmann, Simon and Chico Caminos, Ricardo Alexander and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Schwager, Christian and Schmitz, Mark and Gielen, Hans and Gedle, Yibekal and B{\"u}scher, Rauno}, title = {Technical assessment of Brayton cycle heat pumps for the integration in hybrid PV-CSP power plants}, series = {SOLARPACES 2020}, booktitle = {SOLARPACES 2020}, number = {2445 / 1}, publisher = {AIP conference proceedings / American Institute of Physics}, address = {Melville, NY}, isbn = {978-0-7354-4195-8}, issn = {1551-7616 (online)}, doi = {10.1063/5.0086269}, pages = {11 Seiten}, year = {2022}, abstract = {The hybridization of Concentrated Solar Power (CSP) and Photovoltaics (PV) systems is a promising approach to reduce costs of solar power plants, while increasing dispatchability and flexibility of power generation. High temperature heat pumps (HT HP) can be utilized to boost the salt temperature in the thermal energy storage (TES) of a Parabolic Trough Collector (PTC) system from 385 °C up to 565 °C. A PV field can supply the power for the HT HP, thus effectively storing the PV power as thermal energy. Besides cost-efficiently storing energy from the PV field, the power block efficiency of the overall system is improved due to the higher steam parameters. This paper presents a technical assessment of Brayton cycle heat pumps to be integrated in hybrid PV-CSP power plants. As a first step, a theoretical analysis was carried out to find the most suitable working fluid. The analysis included the fluids Air, Argon (Ar), Nitrogen (N2) and Carbon dioxide (CO2). N2 has been chosen as the optimal working fluid for the system. After the selection of the ideal working medium, different concepts for the arrangement of a HT HP in a PV-CSP hybrid power plant were developed and simulated in EBSILON®Professional. The concepts were evaluated technically by comparing the number of components required, pressure losses and coefficient of performance (COP).}, language = {en} } @article{HoffmannRohrbachUhletal.2022, author = {Hoffmann, Andreas and Rohrbach, Felix and Uhl, Matthias and Ceblin, Maximilian and Bauer, Thomas and Mallah, Marcel and Jacob, Timo and Heuermann, Holger and Kuehne, Alexander J. C.}, title = {Atmospheric pressure plasma-jet treatment of polyacrylonitrile-nonwovens—Stabilization and roll-to-roll processing}, series = {Journal of Applied Polymer Science}, volume = {139}, journal = {Journal of Applied Polymer Science}, number = {37}, publisher = {Wiley}, issn = {0021-8995 (Print)}, doi = {10.1002/app.52887}, pages = {1 -- 9}, year = {2022}, abstract = {Carbon nanofiber nonwovens represent a powerful class of materials with prospective application in filtration technology or as electrodes with high surface area in batteries, fuel cells, and supercapacitors. While new precursor-to-carbon conversion processes have been explored to overcome productivity restrictions for carbon fiber tows, alternatives for the two-step thermal conversion of polyacrylonitrile precursors into carbon fiber nonwovens are absent. In this work, we develop a continuous roll-to-roll stabilization process using an atmospheric pressure microwave plasma jet. We explore the influence of various plasma-jet parameters on the morphology of the nonwoven and compare the stabilized nonwoven to thermally stabilized samples using scanning electron microscopy, differential scanning calorimetry, and infrared spectroscopy. We show that stabilization with a non-equilibrium plasma-jet can be twice as productive as the conventional thermal stabilization in a convection furnace, while producing electrodes of comparable electrochemical performance.}, language = {en} } @inproceedings{ZahraPhaniSrujanChicoCaminosetal.2022, author = {Zahra, Mahdi and Phani Srujan, Merige and Chico Caminos, Ricardo Alexander and Schmitz, Pascal and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e} and Schmitz, Mark and Gielen, Hans and Gedle, Yibekal and Dersch, J{\"u}rgen}, title = {Modeling the thermal behavior of solar salt in electrical resistance heaters for the application in PV-CSP hybrid power plants}, series = {SOLARPACES 2020}, booktitle = {SOLARPACES 2020}, number = {2445 / 1}, publisher = {AIP conference proceedings / American Institute of Physics}, address = {Melville, NY}, isbn = {978-0-7354-4195-8}, issn = {1551-7616 (online)}, doi = {10.1063/5.0086268}, pages = {9 Seiten}, year = {2022}, abstract = {Concentrated Solar Power (CSP) systems are able to store energy cost-effectively in their integrated thermal energy storage (TES). By intelligently combining Photovoltaics (PV) systems with CSP, a further cost reduction of solar power plants is expected, as well as an increase in dispatchability and flexibility of power generation. PV-powered Resistance Heaters (RH) can be deployed to raise the temperature of the molten salt hot storage from 385 °C up to 565 °C in a Parabolic Trough Collector (PTC) plant. To avoid freezing and decomposition of molten salt, the temperature distribution in the electrical resistance heater is investigated in the present study. For this purpose, a RH has been modeled and CFD simulations have been performed. The simulation results show that the hottest regions occur on the electric rod surface behind the last baffle. A technical optimization was performed by adjusting three parameters: Shell-baffle clearance, electric rod-baffle clearance and number of baffles. After the technical optimization was carried out, the temperature difference between the maximum temperature and the average outlet temperature of the salt is within the acceptable limits, thus critical salt decomposition has been avoided. Additionally, the CFD simulations results were analyzed and compared with results obtained with a one-dimensional model in Modelica.}, language = {en} } @article{ButenwegMarinkovicPhlippetal.2022, author = {Butenweg, Christoph and Marinkovic, Marko and Phlipp, Michel and Lins, Robin and Renaut, Philipp}, title = {Isolierung und BIM-basiertes Bauwerksmonitoring des neuen Geb{\"a}udekomplexes f{\"u}r das BioSense-Institut in Novi Sad, Serbien}, series = {Bauingenieur}, volume = {97}, journal = {Bauingenieur}, number = {6}, editor = {Haghsheno, Shervin}, publisher = {VDI Fachmedien}, address = {D{\"u}sseldorf}, issn = {1436-4867}, doi = {10.37544/0005-6650-2022-06-28}, pages = {S3 -- S5}, year = {2022}, abstract = {Im Norden von Serbien erfolgt in Novi Sad der Neubau eines modernen Forschungsgeb{\"a}udes f{\"u}r das BioSense-Institut mit finanzieller Unterst{\"u}tzung durch die Eu-rop{\"a}ische Union. Der Geb{\"a}udeteil mit Laboren wird zum Schutz und zur Sicherstellung des reibungslosen Betriebs der sensiblen und kapitalintensiven technischen Einbauten mit ei-ner Erdbebenisolierung mit integrierter K{\"o}rperschallisolation versehen. Zus{\"a}tzlich wird der entkoppelte Laborteil des For-schungsgeb{\"a}udes mit einem BIM-basierten Bauwerksmonito-ring versehen, um {\"A}nderungen des Geb{\"a}udezustands jederzeit abfragen und beurteilen zu k{\"o}nnen.}, language = {de} } @inproceedings{BlaneckBornheimGriegeretal.2022, author = {Blaneck, Patrick Gustav and Bornheim, Tobias and Grieger, Niklas and Bialonski, Stephan}, title = {Automatic readability assessment of german sentences with transformer ensembles}, series = {Proceedings of the GermEval 2022 Workshop on Text Complexity Assessment of German Text}, booktitle = {Proceedings of the GermEval 2022 Workshop on Text Complexity Assessment of German Text}, publisher = {Association for Computational Linguistics}, address = {Potsdam}, doi = {10.48550/arXiv.2209.04299}, pages = {57 -- 62}, year = {2022}, abstract = {Reliable methods for automatic readability assessment have the potential to impact a variety of fields, ranging from machine translation to self-informed learning. Recently, large language models for the German language (such as GBERT and GPT-2-Wechsel) have become available, allowing to develop Deep Learning based approaches that promise to further improve automatic readability assessment. In this contribution, we studied the ability of ensembles of fine-tuned GBERT and GPT-2-Wechsel models to reliably predict the readability of German sentences. We combined these models with linguistic features and investigated the dependence of prediction performance on ensemble size and composition. Mixed ensembles of GBERT and GPT-2-Wechsel performed better than ensembles of the same size consisting of only GBERT or GPT-2-Wechsel models. Our models were evaluated in the GermEval 2022 Shared Task on Text Complexity Assessment on data of German sentences. On out-of-sample data, our best ensemble achieved a root mean squared error of 0:435.}, language = {en} } @article{DefosseKleinschmidtSchmutzetal.2022, author = {Defosse, Jerome and Kleinschmidt, Joris and Schmutz, Axel and Loop, Torsten and Staat, Manfred and Gatzweiler, Karl-Heinz and Wappler, Frank and Schieren, Mark}, title = {Dental strain on maxillary incisors during tracheal intubation with double-lumen tubes and different laryngoscopy techniques - a blinded manikin study}, series = {Journal of Cardiothoracic and Vascular Anesthesia}, volume = {36}, journal = {Journal of Cardiothoracic and Vascular Anesthesia}, number = {8, Part B}, publisher = {Elsevier}, address = {New York, NY}, issn = {1053-0770}, doi = {10.1053/j.jvca.2022.02.017}, pages = {3021 -- 3027}, year = {2022}, language = {en} } @article{RossiWinandsButenweg2022, author = {Rossi, Leonardo and Winands, Mark H. M. and Butenweg, Christoph}, title = {Monte Carlo Tree Search as an intelligent search tool in structural design problems}, series = {Engineering with Computers : An International Journal for Simulation-Based Engineering}, volume = {38}, journal = {Engineering with Computers : An International Journal for Simulation-Based Engineering}, number = {4}, editor = {Zhang, Jessica}, publisher = {Springer Nature}, address = {Cham}, issn = {1435-5663}, doi = {10.1007/s00366-021-01338-2}, pages = {3219 -- 3236}, year = {2022}, abstract = {Monte Carlo Tree Search (MCTS) is a search technique that in the last decade emerged as a major breakthrough for Artificial Intelligence applications regarding board- and video-games. In 2016, AlphaGo, an MCTS-based software agent, outperformed the human world champion of the board game Go. This game was for long considered almost infeasible for machines, due to its immense search space and the need for a long-term strategy. Since this historical success, MCTS is considered as an effective new approach for many other scientific and technical problems. Interestingly, civil structural engineering, as a discipline, offers many tasks whose solution may benefit from intelligent search and in particular from adopting MCTS as a search tool. In this work, we show how MCTS can be adapted to search for suitable solutions of a structural engineering design problem. The problem consists of choosing the load-bearing elements in a reference reinforced concrete structure, so to achieve a set of specific dynamic characteristics. In the paper, we report the results obtained by applying both a plain and a hybrid version of single-agent MCTS. The hybrid approach consists of an integration of both MCTS and classic Genetic Algorithm (GA), the latter also serving as a term of comparison for the results. The study's outcomes may open new perspectives for the adoption of MCTS as a design tool for civil engineers.}, language = {en} } @inproceedings{MilijašŠakićMarinkovićetal.2022, author = {Milijaš, Aleksa and Šakić, Bogdan and Marinković, Marko and Butenweg, Christoph and Gams, Matija and Klinkel, Sven}, title = {Effects of prior in-plane damage on out-of-plane response of masonry infills with openings}, series = {The Third European Conference on Earthquake Engineering and Seismology}, booktitle = {The Third European Conference on Earthquake Engineering and Seismology}, editor = {Arion, Cristian and Scupin, Alexandra and Ţigănescu, Alexandru}, isbn = {978-973-100-533-1}, pages = {2747 -- 2756}, year = {2022}, abstract = {Masonry infill walls are the most traditional enclosure system that is still widely used in RC frame buildings all over the world, particularly in seismic active regions. Although infill walls are usually neglected in seismic design, during an earthquake event they are subjected to in-plane and out-of-plane forces that can act separately or simultaneously. Since observations of damage to buildings after recent earthquakes showed detrimental effects of in-plane and out-of-plane load interaction on infill walls, the number of studies that focus on influence of in-plane damage on out-of-plane response has significantly increased. However, most of the xperimental campaigns have considered only solid infills and there is a lack of combined in-plane and out-of-plane experimental tests on masonry infills with openings, although windows and doors strongly affect seismic performance. In this paper, two types of experimental tests on infills with window openings are presented. The first is a pure out-of-plane test and the second one is a sequential in-plane and out-of-plane test aimed at investigating the effects of existing in-plane damage on outof-plane response. Additionally, findings from two tests with similar load procedure that were carried out on fully infilled RC frames in the scope of the same project are used for comparison. Test results clearly show that window opening increased vulnerability of infills to combined seismic actions and that prevention of damage in infills with openings is of the utmost importance for seismic safety.}, language = {en} } @inproceedings{GedleSchmitzGielenetal.2022, author = {Gedle, Yibekal and Schmitz, Mark and Gielen, Hans and Schmitz, Pascal and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e} and Mahdi, Zahra and Chico Caminos, Ricardo Alexander and Dersch, J{\"u}rgen}, title = {Analysis of an integrated CSP-PV hybrid power plant}, series = {SOLARPACES 2020}, booktitle = {SOLARPACES 2020}, number = {2445 / 1}, publisher = {AIP conference proceedings / American Institute of Physics}, address = {Melville, NY}, isbn = {978-0-7354-4195-8}, issn = {1551-7616 (online)}, doi = {10.1063/5.0086236}, pages = {9 Seiten}, year = {2022}, abstract = {In the past, CSP and PV have been seen as competing technologies. Despite massive reductions in the electricity generation costs of CSP plants, PV power generation is - at least during sunshine hours - significantly cheaper. If electricity is required not only during the daytime, but around the clock, CSP with its inherent thermal energy storage gets an advantage in terms of LEC. There are a few examples of projects in which CSP plants and PV plants have been co-located, meaning that they feed into the same grid connection point and ideally optimize their operation strategy to yield an overall benefit. In the past eight years, TSK Flagsol has developed a plant concept, which merges both solar technologies into one highly Integrated CSP-PV-Hybrid (ICPH) power plant. Here, unlike in simply co-located concepts, as analyzed e.g. in [1] - [4], excess PV power that would have to be dumped is used in electric molten salt heaters to increase the storage temperature, improving storage and conversion efficiency. The authors demonstrate the electricity cost sensitivity to subsystem sizing for various market scenarios, and compare the resulting optimized ICPH plants with co-located hybrid plants. Independent of the three feed-in tariffs that have been assumed, the ICPH plant shows an electricity cost advantage of almost 20\% while maintaining a high degree of flexibility in power dispatch as it is characteristic for CSP power plants. As all components of such an innovative concept are well proven, the system is ready for commercial market implementation. A first project is already contracted and in early engineering execution.}, language = {en} } @article{ValeroBungErpicumetal.2022, author = {Valero, Daniel and Bung, Daniel Bernhard and Erpicum, Sebastien and Peltier, Yann and Dewals, Benjamin}, title = {Unsteady shallow meandering flows in rectangular reservoirs: a modal analysis of URANS modelling}, series = {Journal of Hydro-environment Research}, journal = {Journal of Hydro-environment Research}, number = {In Press}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1570-6443}, doi = {10.1016/j.jher.2022.03.002}, year = {2022}, abstract = {Shallow flows are common in natural and human-made environments. Even for simple rectangular shallow reservoirs, recent laboratory experiments show that the developing flow fields are particularly complex, involving large-scale turbulent structures. For specific combinations of reservoir size and hydraulic conditions, a meandering jet can be observed. While some aspects of this pseudo-2D flow pattern can be reproduced using a 2D numerical model, new 3D simulations, based on the unsteady Reynolds-Averaged Navier-Stokes equations, show consistent advantages as presented herein. A Proper Orthogonal Decomposition was used to characterize the four most energetic modes of the meandering jet at the free surface level, allowing comparison against experimental data and 2D (depth-averaged) numerical results. Three different isotropic eddy viscosity models (RNG k-ε, k-ε, k-ω) were tested. The 3D models accurately predicted the frequency of the modes, whereas the amplitudes of the modes and associated energy were damped for the friction-dominant cases and augmented for non-frictional ones. The performance of the three turbulence models remained essentially similar, with slightly better predictions by RNG k-ε model in the case with the highest Reynolds number. Finally, the Q-criterion was used to identify vortices and study their dynamics, assisting on the identification of the differences between: i) the three-dimensional phenomenon (here reproduced), ii) its two-dimensional footprint in the free surface (experimental observations) and iii) the depth-averaged case (represented by 2D models).}, language = {en} } @inproceedings{NiederwestbergSchneiderTeixeiraBouraetal.2022, author = {Niederwestberg, Stefan and Schneider, Falko and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf}, title = {Introduction to a direct irradiated transparent tube particle receiver}, series = {SOLARPACES 2020}, booktitle = {SOLARPACES 2020}, number = {2445 / 1}, publisher = {AIP conference proceedings / American Institute of Physics}, address = {Melville, NY}, isbn = {978-0-7354-4195-8}, issn = {1551-7616 (online)}, doi = {10.1063/5.0086735}, pages = {9 Seiten}, year = {2022}, abstract = {New materials often lead to innovations and advantages in technical applications. This also applies to the particle receiver proposed in this work that deploys high-temperature and scratch resistant transparent ceramics. With this receiver design, particles are heated through direct-contact concentrated solar irradiance while flowing downwards through tubular transparent ceramics from top to bottom. In this paper, the developed particle receiver as well as advantages and disadvantages are described. Investigations on the particle heat-up characteristics from solar irradiance were carried out with DEM simulations which indicate that particle temperatures can reach up to 1200 K. Additionally, a simulation model was set up for investigating the dynamic behavior. A test receiver at laboratory scale has been designed and is currently being built. In upcoming tests, the receiver test rig will be used to validate the simulation results. The design and the measurement equipment is described in this work.}, language = {en} } @inproceedings{RigaPitilakisButenwegetal.2022, author = {Riga, Evi and Pitilakis, Kyriazis and Butenweg, Christoph and Apostolaki, Stefania and Karatzetzou, Anna}, title = {Investigating the impact of the new European Seismic Hazard Model ESHM20 on the seismic design and safety control of industrial facilities}, series = {The Third European Conference on Earthquake Engineering and Seismology}, booktitle = {The Third European Conference on Earthquake Engineering and Seismology}, editor = {Arion, Cristian and Scupin, Alexandra and Ţigănescu, Alexandru}, isbn = {978-973-100-533-1}, pages = {3261 -- 3270}, year = {2022}, abstract = {The seismic performance and safety of major European industrial facilities has a global interest for Europe, its citizens and economy. A potential major disaster at an industrial site could affect several countries, probably far beyond the country where it is located. However, the seismic design and safety assessment of these facilities is practically based on national, often outdated seismic hazard assessment studies, due to many reasons, including the absence of a reliable, commonly developed seismic hazard model for whole Europe. This important gap is no more existing, as the 2020 European Seismic Hazard Model ESHM20 was released in December 2021. In this paper we investigate the expected impact of the adoption of ESHM20 on the seismic demand for industrial facilities, through the comparison of the ESHM20 probabilistic hazard at the sites where industrial facilities are located with the respective national and European regulations. The goal of this preliminary work in the framework of Working Group 13 of the European Association for Earthquake Engineering (EAEE), is to identify potential inadequacies in the design and safety control of existing industrial facilities and to highlight the expected impact of the adoption of the new European Seismic Hazard Model on the design of new industrial facilities and the safety assessment of existing ones.}, language = {en} } @inproceedings{PuetzBaierBrauneretal.2022, author = {P{\"u}tz, Sebastian and Baier, Ralph and Brauner, Philipp and Brillowski, Florian and Dammers, Hannah and Liehner, Luca and Mertens, Alexander and Rodemann, Niklas and Schneider, Sebastian and Schollemann, Alexander and Steuer-Dankert, Linda and Vervier, Luisa and Gries, Thomas and Leicht-Scholten, Carmen and Nagel, Saskia K. and Piller, Frank T. and Schuh, G{\"u}nther and Ziefle, Martina and Nitsch, Verena}, title = {An interdisciplinary view on humane interfaces for digital shadows in the internet of production}, series = {2022 15th International Conference on Human System Interaction (HSI)}, booktitle = {2022 15th International Conference on Human System Interaction (HSI)}, publisher = {IEEE}, isbn = {978-1-6654-6823-7 (Print)}, issn = {2158-2246 (Print)}, doi = {10.1109/HSI55341.2022.9869467}, pages = {8 Seiten}, year = {2022}, abstract = {Digital shadows play a central role for the next generation industrial internet, also known as Internet of Production (IoP). However, prior research has not considered systematically how human actors interact with digital shadows, shaping their potential for success. To address this research gap, we assembled an interdisciplinary team of authors from diverse areas of human-centered research to propose and discuss design and research recommendations for the implementation of industrial user interfaces for digital shadows, as they are currently conceptualized for the IoP. Based on the four use cases of decision support systems, knowledge sharing in global production networks, human-robot collaboration, and monitoring employee workload, we derive recommendations for interface design and enhancing workers' capabilities. This analysis is extended by introducing requirements from the higher-level perspectives of governance and organization.}, language = {en} } @inproceedings{BlankeSchmidtGoettscheetal.2022, author = {Blanke, Tobias and Schmidt, Katharina S. and G{\"o}ttsche, Joachim and D{\"o}ring, Bernd and Frisch, J{\´e}r{\^o}me and van Treeck, Christoph}, title = {Time series aggregation for energy system design: review and extension of modelling seasonal storages}, series = {Energy Informatics}, volume = {5}, booktitle = {Energy Informatics}, number = {1, Article number: 17}, editor = {Weidlich, Anke and Neumann, Dirk and Gust, Gunther and Staudt, Philipp and Sch{\"a}fer, Mirko}, publisher = {Springer Nature}, issn = {2520-8942}, doi = {10.1186/s42162-022-00208-5}, pages = {14 Seiten}, year = {2022}, abstract = {Using optimization to design a renewable energy system has become a computationally demanding task as the high temporal fluctuations of demand and supply arise within the considered time series. The aggregation of typical operation periods has become a popular method to reduce effort. These operation periods are modelled independently and cannot interact in most cases. Consequently, seasonal storage is not reproducible. This inability can lead to a significant error, especially for energy systems with a high share of fluctuating renewable energy. The previous paper, "Time series aggregation for energy system design: Modeling seasonal storage", has developed a seasonal storage model to address this issue. Simultaneously, the paper "Optimal design of multi-energy systems with seasonal storage" has developed a different approach. This paper aims to review these models and extend the first model. The extension is a mathematical reformulation to decrease the number of variables and constraints. Furthermore, it aims to reduce the calculation time while achieving the same results.}, language = {en} } @incollection{Golland2022, author = {Golland, Alexander}, title = {Kommentierung von Artikel 94 bis 99 Datenschutz-Grundverordnung}, series = {DSGVO - BDSG - TTDSG: Datenschutzgrundverordnung - Bundesdatenschutzgesetz - Telekommunikation-Telemedien-Datenschutzgesetz}, booktitle = {DSGVO - BDSG - TTDSG: Datenschutzgrundverordnung - Bundesdatenschutzgesetz - Telekommunikation-Telemedien-Datenschutzgesetz}, editor = {Taeger, J{\"u}rgen and Gabel, Detlev}, edition = {4., neu bearbeitete Auflage. 2022}, publisher = {Fachmedien Recht und Wirtschaft}, address = {Frankfurt am Main}, isbn = {978-3-8005-1760-2}, pages = {1575 -- 1621}, year = {2022}, abstract = {Das Werk kommentiert leicht verst{\"a}ndlich, aktuell und praxisnah die DSGVO sowie das BDSG und - neu - auch das TTDSG (Telekommunikation-Telemedien-Datenschutzgesetz). Verantwortliche erhalten damit eine umfassende Darstellung mit Handlungsempfehlungen zum gesamten neuen Datenschutzrecht. Betriebliche Datenschutzbeauftragte k{\"o}nnen sich an den fundierten Kommentierungen orientieren, in denen Literatur und Rechtsprechung aktuell ber{\"u}cksichtigt wurden.}, language = {de} } @article{ColomboDriraFrotscheretal.2022, author = {Colombo, Daniele and Drira, Slah and Frotscher, Ralf and Staat, Manfred}, title = {An element-based formulation for ES-FEM and FS-FEM models for implementation in standard solid mechanics finite element codes for 2D and 3D static analysis}, series = {International Journal for Numerical Methods in Engineering}, volume = {124}, journal = {International Journal for Numerical Methods in Engineering}, number = {2}, publisher = {Wiley}, address = {Chichester}, issn = {1097-0207}, doi = {10.1002/nme.7126}, pages = {402 -- 433}, year = {2022}, abstract = {Edge-based and face-based smoothed finite element methods (ES-FEM and FS-FEM, respectively) are modified versions of the finite element method allowing to achieve more accurate results and to reduce sensitivity to mesh distortion, at least for linear elements. These properties make the two methods very attractive. However, their implementation in a standard finite element code is nontrivial because it requires heavy and extensive modifications to the code architecture. In this article, we present an element-based formulation of ES-FEM and FS-FEM methods allowing to implement the two methods in a standard finite element code with no modifications to its architecture. Moreover, the element-based formulation permits to easily manage any type of element, especially in 3D models where, to the best of the authors' knowledge, only tetrahedral elements are used in FS-FEM applications found in the literature. Shape functions for non-simplex 3D elements are proposed in order to apply FS-FEM to any standard finite element.}, language = {en} } @incollection{HinkeVervierBrauneretal.2022, author = {Hinke, Christian and Vervier, Luisa and Brauner, Philipp and Schneider, Sebastian and Steuer-Dankert, Linda and Ziefle, Martina and Leicht-Scholten, Carmen}, title = {Capability configuration in next generation manufacturing}, series = {Forecasting next generation manufacturing : digital shadows, human-machine collaboration, and data-driven business models}, booktitle = {Forecasting next generation manufacturing : digital shadows, human-machine collaboration, and data-driven business models}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-07733-3}, doi = {10.1007/978-3-031-07734-0_6}, pages = {95 -- 106}, year = {2022}, abstract = {Industrial production systems are facing radical change in multiple dimensions. This change is caused by technological developments and the digital transformation of production, as well as the call for political and social change to facilitate a transformation toward sustainability. These changes affect both the capabilities of production systems and companies and the design of higher education and educational programs. Given the high uncertainty in the likelihood of occurrence and the technical, economic, and societal impacts of these concepts, we conducted a technology foresight study, in the form of a real-time Delphi analysis, to derive reliable future scenarios featuring the next generation of manufacturing systems. This chapter presents the capabilities dimension and describes each projection in detail, offering current case study examples and discussing related research, as well as implications for policy makers and firms. Specifically, we discuss the benefits of capturing expert knowledge and making it accessible to newcomers, especially in highly specialized industries. The experts argue that in order to cope with the challenges and circumstances of today's world, students must already during their education at university learn how to work with AI and other technologies. This means that study programs must change and that universities must adapt their structural aspects to meet the needs of the students.}, language = {en} } @article{MorandiButenwegBreisetal.2022, author = {Morandi, Paolo and Butenweg, Christoph and Breis, Khaled and Beyer, Katrin and Magenes, Guido}, title = {Latest findings on the behaviour factor q for the seismic design of URM buildings}, series = {Bulletin of Earthquake Engineering}, volume = {20}, journal = {Bulletin of Earthquake Engineering}, number = {11}, editor = {Ansal, Atilla}, publisher = {Springer Nature}, address = {Cham}, issn = {1573-1456}, doi = {10.1007/s10518-022-01419-7}, pages = {5797 -- 5848}, year = {2022}, abstract = {Recent earthquakes as the 2012 Emilia earthquake sequence showed that recently built unreinforced masonry (URM) buildings behaved much better than expected and sustained, despite the maximum PGA values ranged between 0.20-0.30 g, either minor damage or structural damage that is deemed repairable. Especially low-rise residential and commercial masonry buildings with a code-conforming seismic design and detailing behaved in general very well without substantial damages. The low damage grades of modern masonry buildings that was observed during this earthquake series highlighted again that codified design procedures based on linear analysis can be rather conservative. Although advances in simulation tools make nonlinear calculation methods more readily accessible to designers, linear analyses will still be the standard design method for years to come. The present paper aims to improve the linear seismic design method by providing a proper definition of the q-factor of URM buildings. These q-factors are derived for low-rise URM buildings with rigid diaphragms which represent recent construction practise in low to moderate seismic areas of Italy and Germany. The behaviour factor components for deformation and energy dissipation capacity and for overstrength due to the redistribution of forces are derived by means of pushover analyses. Furthermore, considerations on the behaviour factor component due to other sources of overstrength in masonry buildings are presented. As a result of the investigations, rationally based values of the behaviour factor q to be used in linear analyses in the range of 2.0-3.0 are proposed.}, language = {en} } @inproceedings{AllalBannisterBuismanetal.2022, author = {Allal, D. and Bannister, R. and Buisman, K. and Capriglione, D. and Di Capua, G. and Garc{\´i}a-Patr{\´o}n, M. and Gatzweiler, Thomas and Gellersen, F. and Harzheim, Thomas and Heuermann, Holger and Hoffmann, J. and Izbrodin, A. and Kuhlmann, K. and Lahbacha, K. and Maffucci, A. and Miele, G. and Mubarak, F. and Salter, M. and Pham, T.D. and Sayegh, A. and Singh, D. and Stein, F. and Zeier, M.}, title = {RF measurements for future communication applications: an overview}, series = {2022 IEEE International Symposium on Measurements \& Networking (M\&N)}, booktitle = {2022 IEEE International Symposium on Measurements \& Networking (M\&N)}, publisher = {IEEE}, isbn = {978-1-6654-8362-9}, issn = {2639-5061}, doi = {10.1109/MN55117.2022.9887740}, pages = {1 -- 6}, year = {2022}, abstract = {In this paper research activities developed within the FutureCom project are presented. The project, funded by the European Metrology Programme for Innovation and Research (EMPIR), aims at evaluating and characterizing: (i) active devices, (ii) signal- and power integrity of field programmable gate array (FPGA) circuits, (iii) operational performance of electronic circuits in real-world and harsh environments (e.g. below and above ambient temperatures and at different levels of humidity), (iv) passive inter-modulation (PIM) in communication systems considering different values of temperature and humidity corresponding to the typical operating conditions that we can experience in real-world scenarios. An overview of the FutureCom project is provided here, then the research activities are described.}, language = {en} } @article{PeereBlanke2022, author = {Peere, Wouter and Blanke, Tobias}, title = {GHEtool: An open-source tool for borefield sizing in Python}, series = {Journal of Open Source Software}, volume = {7}, journal = {Journal of Open Source Software}, number = {76}, editor = {Vernon, Chris}, issn = {2475-9066}, doi = {10.21105/joss.04406}, pages = {1 -- 4, 4406}, year = {2022}, abstract = {GHEtool is a Python package that contains all the functionalities needed to deal with borefield design. It is developed for both researchers and practitioners. The core of this package is the automated sizing of borefield under different conditions. The sizing of a borefield is typically slow due to the high complexity of the mathematical background. Because this tool has a lot of precalculated data, GHEtool can size a borefield in the order of tenths of milliseconds. This sizing typically takes the order of minutes. Therefore, this tool is suited for being implemented in typical workflows where iterations are required. GHEtool also comes with a graphical user interface (GUI). This GUI is prebuilt as an exe-file because this provides access to all the functionalities without coding. A setup to install the GUI at the user-defined place is also implemented and available at: https://www.mech.kuleuven.be/en/tme/research/thermal_systems/tools/ghetool.}, language = {en} } @inproceedings{SchwagerAngeleNourietal.2022, author = {Schwager, Christian and Angele, Florian and Nouri, Bijan and Schwarzb{\"o}zl, Peter and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf}, title = {Impact of DNI forecast quality on performance prediction for a commercial scale solar tower: Application of nowcasting DNI maps to dynamic solar tower simulation}, series = {SolarPACES 2022 conference proceedings}, booktitle = {SolarPACES 2022 conference proceedings}, number = {1}, publisher = {TIB Open Publishing}, address = {Hannover}, issn = {2751-9899 (online)}, doi = {10.52825/solarpaces.v1i.675}, pages = {9 Seiten}, year = {2022}, abstract = {Concerning current efforts to improve operational efficiency and to lower overall costs of concentrating solar power (CSP) plants with prediction-based algorithms, this study investigates the quality and uncertainty of nowcasting data regarding the implications for process predictions. DNI (direct normal irradiation) maps from an all-sky imager-based nowcasting system are applied to a dynamic prediction model coupled with ray tracing. The results underline the need for high-resolution DNI maps in order to predict net yield and receiver outlet temperature realistically. Furthermore, based on a statistical uncertainty analysis, a correlation is developed, which allows for predicting the uncertainty of the net power prediction based on the corresponding DNI forecast uncertainty. However, the study reveals significant prediction errors and the demand for further improvement in the accuracy at which local shadings are forecasted.}, language = {en} } @inproceedings{SchulteSchwagerFrantzetal.2022, author = {Schulte, Jonas and Schwager, Christian and Frantz, Cathy and Schloms, Felix and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf}, title = {Control concept for a molten salt receiver in star design: Development, optimization and testing with cloud passage scenarios}, series = {SolarPACES 2022 conference proceedings}, booktitle = {SolarPACES 2022 conference proceedings}, number = {1}, publisher = {TIB Open Publishing}, address = {Hannover}, issn = {2751-9899 (online)}, doi = {10.52825/solarpaces.v1i.693}, pages = {9 Seiten}, year = {2022}, abstract = {A promising approach to reduce the system costs of molten salt solar receivers is to enable the irradiation of the absorber tubes on both sides. The star design is an innovative receiver design, pursuing this approach. The unconventional design leads to new challenges in controlling the system. This paper presents a control concept for a molten salt receiver system in star design. The control parameters are optimized in a defined test cycle by minimizing a cost function. The control concept is tested in realistic cloud passage scenarios based on real weather data. During these tests, the control system showed no sign of unstable behavior, but to perform sufficiently in every scenario further research and development like integrating Model Predictive Controls (MPCs) need to be done. The presented concept is a starting point to do so.}, language = {en} } @incollection{StriebingMuellerSchraudneretal.2022, author = {Striebing, Clemens and M{\"u}ller, J{\"o}rg and Schraudner, Martina and Gewinner, Irina Valerie and Guerrero Morales, Patricia and Hochfeld, Katharina and Hoffman, Shekinah and Kmec, Julie A. and Nguyen, Huu Minh and Schneider, Jannick and Sheridan, Jennifer and Steuer-Dankert, Linda and Trimble O'Connor, Lindsey and Vandevelde-Rougale, Agn{\`e}s}, title = {Promoting diversity and combatting discrimination in research organizations: a practitioner's guide}, series = {Diversity and discrimination in research organizations}, booktitle = {Diversity and discrimination in research organizations}, publisher = {Emerald Publishing Limited}, address = {Bingley}, isbn = {978-1-80117-959-1 (Print)}, doi = {10.1108/978-1-80117-956-020221012}, pages = {421 -- 442}, year = {2022}, abstract = {The essay is addressed to practitioners in research management and from academic leadership. It describes which measures can contribute to creating an inclusive climate for research teams and preventing and effectively dealing with discrimination. The practical recommendations consider the policy and organizational levels, as well as the individual perspective of research managers. Following a series of basic recommendations, six lessons learned are formulated, derived from the contributions to the edited collection on "Diversity and Discrimination in Research Organizations."}, language = {en} } @incollection{SteuerDankertLeichtScholten2022, author = {Steuer-Dankert, Linda and Leicht-Scholten, Carmen}, title = {Perceiving diversity : an explorative approach in a complex research organization.}, series = {Diversity and discrimination in research organizations}, booktitle = {Diversity and discrimination in research organizations}, publisher = {Emerald Publishing Limited}, address = {Bingley}, isbn = {978-1-80117-959-1 (Print)}, doi = {10.1108/978-1-80117-956-020221010}, pages = {365 -- 392}, year = {2022}, abstract = {Diversity management is seen as a decisive factor for ensuring the development of socially responsible innovations (Beacham and Shambaugh, 2011; Sonntag, 2014; L{\´o}pez, 2015; Uebernickel et al., 2015). However, many diversity management approaches fail due to a one-sided consideration of diversity (Thomas and Ely, 2019) and a lacking linkage between the prevailing organizational culture and the perception of diversity in the respective organization. Reflecting the importance of diverse perspectives, research institutions have a special responsibility to actively deal with diversity, as they are publicly funded institutions that drive socially relevant development and educate future generations of developers, leaders and decision-makers. Nevertheless, only a few studies have so far dealt with the influence of the special framework conditions of the science system on diversity management. Focusing on the interdependency of the organizational culture and diversity management especially in a university research environment, this chapter aims in a first step to provide a theoretical perspective on the framework conditions of a complex research organization in Germany in order to understand the system-specific factors influencing diversity management. In a second step, an exploratory cluster analysis is presented, investigating the perception of diversity and possible influencing factors moderating this perception in a scientific organization. Combining both steps, the results show specific mechanisms and structures of the university research environment that have an impact on diversity management and rigidify structural barriers preventing an increase of diversity. The quantitative study also points out that the management level takes on a special role model function in the scientific system and thus has an influence on the perception of diversity. Consequently, when developing diversity management approaches in research organizations, it is necessary to consider the top-down direction of action, the special nature of organizational structures in the university research environment as well as the special role of the professorial level as role model for the scientific staff.}, language = {en} } @inproceedings{MertensBraunerBaieretal.2022, author = {Mertens, Alexander and Brauner, Philipp and Baier, Ralph and Brillowski, Florian and Dammers, Hannah and van Dyck, Marc and Kong, Iris and K{\"o}nigs, Peter and Kordtomeikel, Frauke and Liehner, Gian Luca and P{\"u}tz, Sebastian and Rodermann, Niklas and Schaar, Anne Kathrin and Steuer-Dankert, Linda and Vervier, Luisa and Wlecke, Shari and Gries, Thomas and Leicht-Scholten, Carmen and Nagel, Saskia K. and Piller, Frank T. and Schuh, G{\"u}nther and Ziefle, Martina and Nitsch, Verena}, title = {Modelling Human Factors in Cyber Physical Production Systems by the Integration of Human Digital Shadows}, series = {Modellierung 2022 Satellite Events}, booktitle = {Modellierung 2022 Satellite Events}, editor = {Michael, Judith and Pfeiffer, J{\´e}r{\^o}me and Wortmann, Andreas}, publisher = {GI Gesellschaft f{\"u}r Informatik}, address = {Bonn}, doi = {10.18420/modellierung2022ws-018}, pages = {147 -- 149}, year = {2022}, abstract = {The future of industrial manufacturing and production will increasingly manifest in the form of cyber-physical production systems. Here, Digital Shadows will act as mediators between the physical and digital world to model and operationalize the interactions and relationships between different entities in production systems. Until now, the associated concepts have been primarily pursued and implemented from a technocentric perspective, in which human actors play a subordinate role, if they are considered at all. This paper outlines an anthropocentric approach that explicitly considers the characteristics, behavior, and traits and states of human actors in socio-technical production systems. For this purpose, we discuss the potentials and the expected challenges and threats of creating and using Human Digital Shadows in production.}, language = {en} } @article{SchwagerFleschSchwarzboezletal.2022, author = {Schwager, Christian and Flesch, Robert and Schwarzb{\"o}zl, Peter and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e}}, title = {Advanced two phase flow model for transient molten salt receiver system simulation}, series = {Solar Energy}, volume = {232}, journal = {Solar Energy}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0038-092X (print)}, doi = {10.1016/j.solener.2021.12.065}, pages = {362 -- 375}, year = {2022}, abstract = {In order to realistically predict and optimize the actual performance of a concentrating solar power (CSP) plant sophisticated simulation models and methods are required. This paper presents a detailed dynamic simulation model for a Molten Salt Solar Tower (MST) system, which is capable of simulating transient operation including detailed startup and shutdown procedures including drainage and refill. For appropriate representation of the transient behavior of the receiver as well as replication of local bulk and surface temperatures a discretized receiver model based on a novel homogeneous two-phase (2P) flow modelling approach is implemented in Modelica Dymola®. This allows for reasonable representation of the very different hydraulic and thermal properties of molten salt versus air as well as the transition between both. This dynamic 2P receiver model is embedded in a comprehensive one-dimensional model of a commercial scale MST system and coupled with a transient receiver flux density distribution from raytracing based heliostat field simulation. This enables for detailed process prediction with reasonable computational effort, while providing data such as local salt film and wall temperatures, realistic control behavior as well as net performance of the overall system. Besides a model description, this paper presents some results of a validation as well as the simulation of a complete startup procedure. Finally, a study on numerical simulation performance and grid dependencies is presented and discussed.}, language = {en} } @article{BhattaraiMayStaatetal.2022, author = {Bhattarai, Aroj and May, Charlotte Anabell and Staat, Manfred and Kowalczyk, Wojciech and Tran, Thanh Ngoc}, title = {Layer-specific damage modeling of porcine large intestine under biaxial tension}, series = {Bioengineering}, volume = {9}, journal = {Bioengineering}, number = {10, Early Access}, publisher = {MDPI}, address = {Basel}, issn = {2306-5354}, doi = {10.3390/bioengineering9100528}, pages = {1 -- 17}, year = {2022}, abstract = {The mechanical behavior of the large intestine beyond the ultimate stress has never been investigated. Stretching beyond the ultimate stress may drastically impair the tissue microstructure, which consequently weakens its healthy state functions of absorption, temporary storage, and transportation for defecation. Due to closely similar microstructure and function with humans, biaxial tensile experiments on the porcine large intestine have been performed in this study. In this paper, we report hyperelastic characterization of the large intestine based on experiments in 102 specimens. We also report the theoretical analysis of the experimental results, including an exponential damage evolution function. The fracture energies and the threshold stresses are set as damage material parameters for the longitudinal muscular, the circumferential muscular and the submucosal collagenous layers. A biaxial tensile simulation of a linear brick element has been performed to validate the applicability of the estimated material parameters. The model successfully simulates the biomechanical response of the large intestine under physiological and non-physiological loads.}, language = {en} } @incollection{Alt2022, author = {Alt, Helmut}, title = {Speicher speichern, Leiter leiten}, series = {Generationenprojekt Energiewende : Elektroenergiepolitik im Spannungsfeld zwischen Vision und Mission / Herbert Niederhausen (Hrsg.)}, booktitle = {Generationenprojekt Energiewende : Elektroenergiepolitik im Spannungsfeld zwischen Vision und Mission / Herbert Niederhausen (Hrsg.)}, publisher = {Books on Demand}, address = {Norderstedt}, isbn = {9783755774389}, pages = {125 -- 136}, year = {2022}, language = {de} } @inproceedings{BuesgenKloeserKohletal.2022, author = {B{\"u}sgen, Andr{\´e} and Kl{\"o}ser, Lars and Kohl, Philipp and Schmidts, Oliver and Kraft, Bodo and Z{\"u}ndorf, Albert}, title = {Exploratory analysis of chat-based black market profiles with natural language processing}, series = {Proceedings of the 11th International Conference on Data Science, Technology and Applications}, booktitle = {Proceedings of the 11th International Conference on Data Science, Technology and Applications}, isbn = {978-989-758-583-8}, issn = {2184-285X}, doi = {10.5220/0011271400003269}, pages = {83 -- 94}, year = {2022}, abstract = {Messenger apps like WhatsApp or Telegram are an integral part of daily communication. Besides the various positive effects, those services extend the operating range of criminals. Open trading groups with many thousand participants emerged on Telegram. Law enforcement agencies monitor suspicious users in such chat rooms. This research shows that text analysis, based on natural language processing, facilitates this through a meaningful domain overview and detailed investigations. We crawled a corpus from such self-proclaimed black markets and annotated five attribute types products, money, payment methods, user names, and locations. Based on each message a user sends, we extract and group these attributes to build profiles. Then, we build features to cluster the profiles. Pretrained word vectors yield better unsupervised clustering results than current state-of-the-art transformer models. The result is a semantically meaningful high-level overview of the user landscape of black market chatrooms. Additionally, the extracted structured information serves as a foundation for further data exploration, for example, the most active users or preferred payment methods.}, language = {en} } @inproceedings{OstkottePetersHueningetal.2022, author = {Ostkotte, Sebastian and Peters, Constantin and H{\"u}ning, Felix and Bragard, Michael}, title = {Design, implementation and verification of an rotational incremental position encoder based on the magnetic Wiegand effect}, series = {2022 ELEKTRO (ELEKTRO)}, booktitle = {2022 ELEKTRO (ELEKTRO)}, publisher = {IEEE}, isbn = {978-1-6654-6726-1}, issn = {2691-0616}, doi = {10.1109/ELEKTRO53996.2022.9803477}, pages = {6 Seiten}, year = {2022}, abstract = {This paper covers the use of the magnetic Wiegand effect to design an innovative incremental encoder. First, a theoretical design is given, followed by an estimation of the achievable accuracy and an optimization in open-loop operation. Finally, a successful experimental verification is presented. For this purpose, a permanent magnet synchronous machine is controlled in a field-oriented manner, using the angle information of the prototype.}, language = {en} } @book{Engelmann2022, author = {Engelmann, Ulrich M.}, title = {Zielf{\"u}hrend moderieren}, publisher = {UVK Verlag}, address = {Stuttgart}, isbn = {9783838556895}, doi = {10.36198/9783838556895}, pages = {438 S.}, year = {2022}, abstract = {In der Teamarbeit wird Moderation zum Erfolgsfaktor, der jedoch h{\"a}ufig untersch{\"a}tzt wird. Ausgehend vom pers{\"o}nlichen Kompetenzniveau verkn{\"u}pft dieses Buch Grundlagen und Methoden zu Wegen, um Ihre pers{\"o}nliche Entwicklung individuell zu begleiten: Neulinge finden hilfreiche Checklisten und Basistechniken f{\"u}r ihre ersten Moderationen, Fortgeschrittene wertvolle Praxistipps und Methoden f{\"u}r den Ausbau ihrer Moderationskompetenz. Profis schließlich genießen eine raffinierte Aussicht auf weniger bekannte Techniken und neue Anwendungen. Weiterf{\"u}hrende Exkurse zum Meeting-Management und zur Online-Moderation runden den Anwendungshorizont ab. Ob in Beruf, Studium oder Ehrenamt - derart ausgestattet gelingen Ihre eigene sowie die Entwicklung Ihres Teams durch zielf{\"u}hrende Moderationen.}, language = {de} } @article{MandekarHollandThielenetal.2022, author = {Mandekar, Swati and Holland, Abigail and Thielen, Moritz and Behbahani, Mehdi and Melnykowycz, Mark}, title = {Advancing towards Ubiquitous EEG, Correlation of In-Ear EEG with Forehead EEG}, series = {Sensors}, volume = {22}, journal = {Sensors}, number = {4}, publisher = {MDPI}, address = {Basel}, issn = {1424-8220}, doi = {10.3390/s22041568}, pages = {1 -- 19}, year = {2022}, abstract = {Wearable EEG has gained popularity in recent years driven by promising uses outside of clinics and research. The ubiquitous application of continuous EEG requires unobtrusive form-factors that are easily acceptable by the end-users. In this progression, wearable EEG systems have been moving from full scalp to forehead and recently to the ear. The aim of this study is to demonstrate that emerging ear-EEG provides similar impedance and signal properties as established forehead EEG. EEG data using eyes-open and closed alpha paradigm were acquired from ten healthy subjects using generic earpieces fitted with three custom-made electrodes and a forehead electrode (at Fpx) after impedance analysis. Inter-subject variability in in-ear electrode impedance ranged from 20 kΩ to 25 kΩ at 10 Hz. Signal quality was comparable with an SNR of 6 for in-ear and 8 for forehead electrodes. Alpha attenuation was significant during the eyes-open condition in all in-ear electrodes, and it followed the structure of power spectral density plots of forehead electrodes, with the Pearson correlation coefficient of 0.92 between in-ear locations ELE (Left Ear Superior) and ERE (Right Ear Superior) and forehead locations, Fp1 and Fp2, respectively. The results indicate that in-ear EEG is an unobtrusive alternative in terms of impedance, signal properties and information content to established forehead EEG.}, language = {en} }