@inproceedings{HoffmannNierenGaebetal.2019,
  author    = {Hoffmann, Katharina and Nieren, Monika and G{\"a}b, Martina and Kasper, Anna and Elbers, Gereon},
  title     = {The potential of near infrared spectroscopy (NIRS) for the environmental biomonitoring of plants},
  series = {International conference on Life Sciences and Technology},
  volume    = {276},
  booktitle = {International conference on Life Sciences and Technology},
  number    = {012009},
  issn      = {1755-1315},
  doi       = {10.1088/1755-1315/276/1/012009},
  pages     = {1 -- 3},
  year      = {2019},
  abstract  = {In the current environmental condition, the increase in pollution of the air, water, and soil indirectly will induce plants stress and decrease vegetation growth rate. These issues pay more attention to be solved by scientists worldwide. The higher level of chemical pollutants also induced the gradual changes in plants metabolism and decreased enzymatic activity. Importantly, environmental biomonitoring may play a pivotal contribution to prevent biodiversity degradation and plants stress due to pollutant exposure. Several previous studies have been done to monitor the effect of environmental changes on plants growth. Among that, Near Infrared spectroscopy (NIRS) offers an alternative way to observe the significant alteration of plant physiology caused by environmental damage related to pollution. Impairment of photosynthesis, nutrient and oxidative imbalances, and mutagenesis.},
  language  = {en}
}
@inproceedings{FerreinSchollNeumannetal.2019,
  author    = {Ferrein, Alexander and Scholl, Ingrid and Neumann, Tobias and Kr{\"u}ckel, Kai and Schiffer, Stefan},
  title     = {A system for continuous underground site mapping and exploration},
  doi       = {10.5772/intechopen.85859},
  pages     = {16 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{FerreinBharatheeshaSchifferetal.2019,
  author    = {Ferrein, Alexander and Bharatheesha, Mukunda and Schiffer, Stefan and Corbato, Carlos Hernandez},
  title     = {TRROS 2018 : Teaching Robotics with ROS Workshop at ERF 2018; Proceedings of the Workshop on Teaching Robotics with ROS (held at ERF 2018), co-located with European Robotics Forum 2018 (ERF 2018), Tampere, Finland, March 15th, 2018},
  series = {CEUR Workshop Proceedings},
  booktitle = {CEUR Workshop Proceedings},
  number    = {Vol-2329},
  issn      = {1613-0073},
  pages     = {68 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{AzarDigel2019,
  author    = {Azar, Fouad and Digel, Ilya},
  title     = {Utilization of fluorescence spectroscopy and neural networks in clinical analysis},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {40 -- 41},
  year      = {2019},
  abstract  = {Fluorescence topography of human urine in combination with learning algorithms can provide a variant pattern recognition method in analytical clinical chemistry and, eventually, diagnosis.},
  language  = {en}
}
@inproceedings{ZingsheimGrimmerOrtneretal.2019,
  author    = {Zingsheim, Jonas and Grimmer, Timo and Ortner, Marion and Schmaderer, Christoph and Hauser, Christine and Kotliar, Konstantin},
  title     = {Recognition of subjects with mild cognitive impairment (MCI) by the use of retinal arterial vessels.},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {36 -- 37},
  year      = {2019},
  language  = {en}
}
@inproceedings{BlumAlbannaBenninghausetal.2019,
  author    = {Blum, Yannik and Albanna, Walid and Benninghaus, Anne and Kotliar, Konstantin},
  title     = {Vasomotion in retinal vessels of patients presenting post hemorrhagic hydrocephalus following subarachnoid hemorrhage},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {38 -- 39},
  year      = {2019},
  abstract  = {Clearance of blood components and fluid drainage play a crucial role in subarachnoid hemorrhage (SAH) and post hemorrhagic hydrocephalus (PHH). With the involvement of interstitial fluid (ISF) and cerebrospinal fluid (CSF), two pathways for the clearance of fluid and solutes in the brain are proposed. Starting at the level of capillaries, flow of ISF follows along the basement membranes in the walls of cerebral arteries out of the parenchyma to drain into the lymphatics and CSF [1]-[3]. Conversely, it is shown that CSF enters the parenchyma between glial and pial basement membranes of penetrating arteries [4]-[6]. Nevertheless, the involved structures and the contribution of either flow pathway to fluid balance between the subarachnoid space and interstitial space remains controversial. Low frequency oscillations in vascular tone are referred to as vasomotion and corresponding vasomotion waves are modeled as the driving force for flow of ISF out of the parenchyma [7]. Retinal vessel analysis (RVA) allows non-invasive measurement of retinal vessel vasomotion with respect to diameter changes [8]. Thus, the aim of the study is to investigate vasomotion in RVA signals of SAH and PHH patients.},
  language  = {en}
}
@inproceedings{SiebigterothKraftSchmidtsetal.2019,
  author    = {Siebigteroth, Ines and Kraft, Bodo and Schmidts, Oliver and Z{\"u}ndorf, Albert},
  title     = {A Study on Improving Corpus Creation by Pair Annotation},
  series = {Proceedings of the Poster Session of the 2nd Conference on Language, Data and Knowledge (LDK-PS 2019)},
  booktitle = {Proceedings of the Poster Session of the 2nd Conference on Language, Data and Knowledge (LDK-PS 2019)},
  issn      = {1613-0073},
  pages     = {40 -- 44},
  year      = {2019},
  language  = {en}
}
@inproceedings{Eggert2019,
  author    = {Eggert, Mathias},
  title     = {Understanding the acceptance of smart home-based insurances},
  series = {Proceedings of the 27th European Conference on Information Systems (ECIS), Stockholm \& Uppsala, Sweden, June 8-14, 2019},
  booktitle = {Proceedings of the 27th European Conference on Information Systems (ECIS), Stockholm \& Uppsala, Sweden, June 8-14, 2019},
  isbn      = {978-1-7336325-0-8},
  pages     = {1 -- 15},
  year      = {2019},
  language  = {en}
}
@inproceedings{GaldiHartungDugelay2019,
  author    = {Galdi, Chiara and Hartung, Frank and Dugelay, Jean-Luc},
  title     = {Socrates: A database of realistic data for source camera recognition on smartphones},
  series = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  booktitle = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  isbn      = {978-989-758-351-3},
  doi       = {10.5220/0007403706480655},
  pages     = {648 -- 655},
  year      = {2019},
  language  = {en}
}
@inproceedings{Huening2019,
  author    = {H{\"u}ning, Felix},
  title     = {Complexity for heterogeneous classes: teaching embedded systems using an open project approach},
  series = {Varietas delectat: Complexity is the new normality - 47th Annual Conference, Budapest, Hungary16th - 20th September 2019. SEFI 47th Annual Conference Proceedings},
  booktitle = {Varietas delectat: Complexity is the new normality - 47th Annual Conference, Budapest, Hungary16th - 20th September 2019. SEFI 47th Annual Conference Proceedings},
  isbn      = {978-2-87352-018-2},
  pages     = {540 -- 549},
  year      = {2019},
  language  = {en}
}
@inproceedings{BreitbachAlexopoulosMayetal.2019,
  author    = {Breitbach, Gerd and Alexopoulos, Spiros and May, Martin and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Analysis of volumetric solar radiation absorbers made of wire meshes},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117521},
  pages     = {030009-1 -- 030009-6},
  year      = {2019},
  language  = {en}
}
@inproceedings{MahdiRendonSchwageretal.2019,
  author    = {Mahdi, Zahra and Rend{\´o}n, Carlos and Schwager, Christian and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Novel concept for indirect solar-heated methane reforming},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {0094-243X},
  doi       = {10.1063/1.5117694},
  pages     = {180014-1 -- 180014-7},
  year      = {2019},
  language  = {en}
}
@inproceedings{MayBreitbachAlexopoulosetal.2019,
  author    = {May, Martin and Breitbach, Gerd and Alexopoulos, Spiros and Latzke, Markus and B{\"a}umer, Klaus and Uhlig, Ralf and S{\"o}hn, Matthias and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Experimental facility for investigations of wire mesh absorbers for pressurized gases},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117547},
  pages     = {030035-1 -- 030035-9},
  year      = {2019},
  language  = {en}
}
@inproceedings{SattlerAlexopoulosCaminosetal.2019,
  author    = {Sattler, Johannes, Christoph and Alexopoulos, Spiros and Caminos, Ricardo Alexander Chico and Mitchell, John C. and Ruiz, Victor C. and Kalogirou, Soteris and Ktistis, Panayiotis K. and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117663},
  pages     = {150007-1 -- 150007-8},
  year      = {2019},
  language  = {en}
}
@inproceedings{AlhwarinSchifferFerreinetal.2019,
  author    = {Alhwarin, Faraj and Schiffer, Stefan and Ferrein, Alexander and Scholl, Ingrid},
  title     = {An Optimized Method for 3D Body Scanning Applications Based on KinectFusion},
  series = {Communications in Computer and Information Science},
  volume    = {1024},
  booktitle = {Communications in Computer and Information Science},
  publisher = {Springer},
  issn      = {1865-0929},
  doi       = {10.1007/978-3-030-29196-9_6},
  pages     = {100 -- 113},
  year      = {2019},
  language  = {en}
}
@inproceedings{LuftGebhardtBalc2019,
  author    = {Luft, Angela and Gebhardt, Andreas and Balc, Nicolae},
  title     = {Challenges of additive manufacturing in production systems},
  series = {Modern technologies in manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern technologies in manufacturing (MTeM 2019)},
  number    = {Article 01003},
  doi       = {10.1051/matecconf/201929901003},
  pages     = {6 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{AbbasThurnKessleretal.2019,
  author    = {Abbas, Karim and Thurn, Laura and Kessler, Julia and Eichler, Fabian},
  title     = {Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads},
  series = {Modern technologies in manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern technologies in manufacturing (MTeM 2019)},
  number    = {Article 01009},
  doi       = {10.1051/matecconf/201929901009},
  pages     = {8 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{EichlerSkupinThurnetal.2019,
  author    = {Eichler, Fabian and Skupin, Marco and Thurn, Laura and Kasch, Susanne and Schmidt, Thomas},
  title     = {Operating limits for beam melting of glass materials},
  series = {Modern Technologies in Manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2019)},
  number    = {Article 01004},
  doi       = {10.1051/matecconf/201929901004},
  pages     = {8 Seiten},
  year      = {2019},
  abstract  = {Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.},
  language  = {en}
}
@inproceedings{BaaderKellerLehmannetal.2019,
  author    = {Baader, Fabian and Keller, Denis and Lehmann, Raphael and Gerber, Lukas and Reiswich, Martin and Dachwald, Bernd and F{\"o}rstner, Roger},
  title     = {Operating melting probes for ice penetration under sublimation conditions and in reduced gravity on a sounding rocket},
  series = {Proceedings of the 24th ESA Symposium on European Rocket and Balloon Programmes and related Research},
  booktitle = {Proceedings of the 24th ESA Symposium on European Rocket and Balloon Programmes and related Research},
  issn      = {0379-6566},
  pages     = {8 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{LudowicyRingsFingeretal.2019,
  author    = {Ludowicy, Jonas and Rings, Ren{\´e} and Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {Impact of Propulsion Technology Levels on the Sizing and Energy Consumption for Serial HybridElectric General Aviation Aircraft},
  series = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  booktitle = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  pages     = {14 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{RingsLudowicyFingeretal.2019,
  author    = {Rings, Ren{\´e} and Ludowicy, Jonas and Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {Sensitivity Analysis of General Aviation Aircraft with Parallel Hybrid-Electric Propulsion Systems},
  series = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  booktitle = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  pages     = {14 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{CordesGligorevicBlicharski2019,
  author    = {Cordes, Sven and Gligorevic, Snjezana and Blicharski, Peter},
  title     = {Analysis of sine precision influence on DOA estimation using the MUSIC algorithm},
  series = {2019 20th International Radar Symposium (IRS)},
  booktitle = {2019 20th International Radar Symposium (IRS)},
  isbn      = {978-3-7369-9860-5},
  doi       = {10.23919/IRS.2019.8768162},
  pages     = {1 -- 10},
  year      = {2019},
  language  = {en}
}
@inproceedings{FingerBraunBil2019,
  author    = {Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {Impact of Engine Failure Constraints on the Initial Sizing of Hybrid-Electric GA Aircraft},
  series = {AIAA Scitech 2019 Forum},
  booktitle = {AIAA Scitech 2019 Forum},
  doi       = {10.2514/6.2019-1812},
  year      = {2019},
  language  = {en}
}
@inproceedings{SchwagerTeixeiraBouraFleschetal.2019,
  author    = {Schwager, Christian and Teixeira Boura, Cristiano Jos{\´e} and Flesch, Robert and Alexopoulos, Spiros and Herrmann, Ulf},
  title     = {Improved efficiency prediction of a molten salt receiver based on dynamic cloud passage simulation},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  number    = {1},
  isbn      = {978-0-7354-1866-0},
  doi       = {10.1063/1.5117566},
  pages     = {030054-1 -- 030054-8},
  year      = {2019},
  language  = {en}
}
@inproceedings{SteinbauerFerrein2019,
  author    = {Steinbauer, Gerald and Ferrein, Alexander},
  title     = {CogRob 2018 : Cognitive Robotics Workshop. Proceedings of the 11th Cognitive Robotics Workshop 2018 co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018). Tempe, AZ, USA, October 27th, 2018.},
  series = {CEUR workshop proceedings},
  booktitle = {CEUR workshop proceedings},
  number    = {Vol-2325},
  issn      = {1613-0073},
  pages     = {46 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{SchifferBragard2019,
  author    = {Schiffer, Fabian and Bragard, Michael},
  title     = {Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines},
  series = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  isbn      = {978-1-5386-9257-8},
  doi       = {10.1109/REM.2019.8744101},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{BragardSubeSchneideretal.2019,
  author    = {Bragard, Michael and Sube, Maike and Schneider, Maike and Jungemann, Christoph},
  title     = {Introducing a Cross-University Bachelor's Programme with Orientation Semester - Enabling a Permeable Academic Education System},
  series = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  isbn      = {978-1-5386-9257-8},
  doi       = {10.1109/REM.2019.8744132},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {en}
}
@inproceedings{BayerHeschelerArtmannetal.2019,
  author    = {Bayer, Robin and Hescheler, J{\"u}rgen and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Treating arterial hypertension in a cell culture well},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH AachenW},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH AachenW},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {5 -- 6},
  year      = {2019},
  abstract  = {Hypertension describes the pathological increase of blood pressure, which is most commonly associated with the increase of vascular wall stiffness [1]. Referring to the "Deutsche Bluthochdruck Liga" this pathology shows a growing trend in our aging society. In order to find novel pharmacological and probably personalized treatments, we want to present a functional approach to study biomechanical properties of a human aortic vascular model. In this method review we will give an overview of recent studies which were carried out with the CellDrum technology [2] and underline the added value to already existing standard procedures known from the field of physiology. Herein described CellDrum technology is a system to measure functional mechanical properties of cell monolayers and thin tissue constructs in-vitro. Additionally, the CellDrum enables to elucidate the mechanical response of cells to pharmacological drugs, toxins and vasoactive agents. Due to its highly flexible polymer support, cells can also be mechanically stimulated by steady and cyclic biaxial stretching.},
  language  = {en}
}
@inproceedings{GoettenFingerHavermannetal.2019,
  author    = {G{\"o}tten, Falk and Finger, Felix and Havermann, Marc and Braun, Carsten and Marino, Matthew and Bil, Cees},
  title     = {A highly automated method for simulating airfoil characteristics at low Reynolds number using a RANS - transition approach},
  series = {Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany},
  booktitle = {Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany},
  doi       = {10.25967/490026},
  pages     = {1 -- 14},
  year      = {2019},
  language  = {en}
}
@inproceedings{FingerGoettenBraunetal.2019,
  author    = {Finger, Felix and G{\"o}tten, Falk and Braun, Carsten and Bil, Cees},
  title     = {Mass, Primary Energy, and Cost - The Impact of Optimization Objectives on the Initial Sizing of Hybrid-Electric General Aviation Aircraft},
  series = {Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany},
  doi       = {10.25967/490012},
  pages     = {1 -- 17},
  year      = {2019},
  language  = {en}
}
@inproceedings{GoettenFinger2019,
  author    = {G{\"o}tten, Falk and Finger, Felix},
  title     = {Conceptual Design of a Modular 150 kg Vertical Take-off and Landing Unmanned Aerial Vehicle},
  series = {Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany},
  booktitle = {Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany},
  pages     = {1 -- 10},
  year      = {2019},
  language  = {en}
}
@inproceedings{HailerWeberArent2019,
  author    = {Hailer, Benjamin and Weber, Tobias and Arent, Jan-Christoph},
  title     = {Manufacturing Process Simulation for Autoclave-Produced Sandwich Structures},
  series = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  booktitle = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{WeberEnglhardHaileretal.2019,
  author    = {Weber, Tobias and Englhard, Markus and Hailer, Benjamin and Arent, Jan-Christoph},
  title     = {Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling},
  series = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  booktitle = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  pages     = {1 -- 10},
  year      = {2019},
  language  = {en}
}
@inproceedings{MuellerAltherrAholaetal.2019,
  author    = {M{\"u}ller, Tim M. and Altherr, Lena and Ahola, Marja and Schabel, Samuel and Pelz, Peter F.},
  title     = {Multi-Criteria optimization of pressure screen systems in paper recycling - balancing quality, yield, energy consumption and system complexity},
  series = {EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization},
  booktitle = {EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization},
  editor    = {Rodrigues, H. C.},
  publisher = {Springer International Publishing},
  address   = {Basel},
  isbn      = {978-3-319-97773-7},
  doi       = {10.1007/978-3-319-97773-7_105},
  year      = {2019},
  abstract  = {The paper industry is the industry with the third highest energy consumption in the European Union. Using recycled paper instead of fresh fibers for papermaking is less energy consuming and saves resources. However, adhesive contaminants in recycled paper are particularly problematic since they reduce the quality of the resulting paper-product. To remove as many contaminants and at the same time obtain as many valuable fibres as possible, fine screening systems, consisting of multiple interconnected pressure screens, are used. Choosing the best configuration is a non-trivial task: The screens can be interconnected in several ways, and suitable screen designs as well as operational parameters have to be selected. Additionally, one has to face conflicting objectives. In this paper, we present an approach for the multi-criteria optimization of pressure screen systems based on Mixed-Integer Nonlinear Programming. We specifically focus on a clear representation of the trade-off between different objectives.},
  language  = {en}
}
@inproceedings{LorenzAltherrPelz2019,
  author    = {Lorenz, Imke-Sophie B. and Altherr, Lena and Pelz, Peter F.},
  title     = {Graph-theoretic resilience analysis of a water distribution system's topology},
  series = {World Congress on Resilience, Reliability and Asset Management 2019},
  booktitle = {World Congress on Resilience, Reliability and Asset Management 2019},
  pages     = {106 -- 109},
  year      = {2019},
  abstract  = {Water suppliers are faced with the great challenge of achieving high-quality and, at the same time, low-cost water supply. In practice, the focus is set on the most beneficial maintenance measures and/or capacity adaptations of existing water distribution systems (WDS). Since climatic and demographic influences will pose further challenges in the future, the resilience enhancement of WDS, i.e. the enhancement of their capability to withstand and recover from disturbances, has been in particular focus recently. To assess the resilience of WDS, metrics based on graph theory have been proposed. In this study, a promising approach is applied to assess the resilience of the WDS for a district in a major German City. The conducted analysis provides insight into the process of actively influencing the resilience of WDS},
  language  = {en}
}
@inproceedings{GrundmannBauerBodenetal.2019,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Boden, Ralf and Ceriotti, Matteo and Chand, Suditi and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Heiligers, Jeannette and Herč{\´i}k, David and H{\´e}rique, Alain and Ho, Tra-Mi and Jahnke, Rico and Kofman, Wlodek and Lange, Caroline and Lichtenheldt, Roy and McInnes, Colin and Meß, Jan-Gerd and Mikschl, Tobias and Mikulz, Eugen and Montenegro, Sergio and Moore, Iain and Pelivan, Ivanka and Peloni, Alessandro and Plettemeier, Dirk and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Rogez, Yves and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and T{\´o}th, Norbert and Vergaaij, Merel and Viavattene, Giulia and Wejmo, Elisabet and Wiedemann, Carsten and Wolff, Friederike and Ziach, Christian},
  title     = {Flights are ten a sail - Re-use and commonality in the design and system engineering of small spacecraft solar sail missions with modular hardware for responsive and adaptive exploration},
  series = {70th International Astronautical Congress (IAC)},
  booktitle = {70th International Astronautical Congress (IAC)},
  isbn      = {9781713814856},
  pages     = {1 -- 7},
  year      = {2019},
  language  = {en}
}
@inproceedings{GrundmannBauerBodenetal.2019,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Boden, Ralf Christian and Ceriotti, Matteo and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Hercik, D. and Herique, A. and Ho, Tra-Mi and Jahnke, Rico and Kofman, Wlodek and Lange, Caroline and Lichtenheldt, Roy and McInnes, Colin R. and Mikschl, Tobias and Mikulz, Eugen and Montenegro, Sergio and Moore, Iain and Pelivan, Ivanka and Peloni, Alessandro and Plettemeier, Dirk and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Rogez, Yves and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and Toth, Norbert and Viavattene, Giulia and Wejmo, Elisabet and Wolff, Friederike and Ziach, Christian},
  title     = {Responsive integrated small spacecraft solar sail and payload design concepts and missions},
  series = {Conference: 5th International Symposium on Solar Sailing (ISSS 2019)},
  booktitle = {Conference: 5th International Symposium on Solar Sailing (ISSS 2019)},
  year      = {2019},
  abstract  = {Asteroid mining has the potential to greatly reduce the cost of in-space manufacturing, production of propellant for space transportation and consumables for crewed spacecraft, compared to launching the required resources from Earth's deep gravity well. This paper discusses the top-level mission architecture and trajectory design for these resource-return missions, comparing high-thrust trajectories with continuous low-thrust solar-sail trajectories. This work focuses on maximizing the economic Net Present Value, which takes the time-cost of finance into account and therefore balances the returned resource mass and mission duration. The different propulsion methods will then be compared in terms of maximum economic return, sets of attainable target asteroids, and mission flexibility. This paper provides one more step towards making commercial asteroid mining an economically viable reality by integrating trajectory design, propulsion technology and economic modelling.},
  language  = {en}
}
@inproceedings{GrundmannBauerBodenetal.2019,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Boden, Ralf Christian and Ceriotti, Matteo and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Hercik, D. and Herique, A. and Ho, Tra-Mi and Jahnke, Rico and Kofman, Wlodek and Lange, Caroline and Lichtenheldt, Roy and McInnes, Colin R. and Mikschl, Tobias and Montenegro, Sergio and Moore, Iain and Pelivan, Ivanka and Peloni, Alessandro and Plettenmeier, Dirk and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Rogez, Yves and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and Toth, Norbert and Viavattene, Giulia and Wejmo, Elisabet and Wolff, Friederike and Ziach, Christian},
  title     = {Responsive exploration and asteroid characterization through integrated solar sail and lander development using small spacecraft technologies},
  series = {IAA Planetary Defense Conference},
  booktitle = {IAA Planetary Defense Conference},
  year      = {2019},
  abstract  = {In parallel to the evolution of the Planetary Defense Conference, the exploration of small solar system bodies has advanced from fast fly-bys on the sidelines of missions to the planets to the implementation of dedicated sample-return and in-situ analysis missions. Spacecraft of all sizes have landed, touch-and-go sampled, been gently beached, or impacted at hypervelocity on asteroid and comet surfaces. More have flown by close enough to image their surfaces in detail or sample their immediate environment, often as part of an extended or re-purposed mission. And finally, full-scale planetary defense experiment missions are in the making. Highly efficient low-thrust propulsion is increasingly applied beyond commercial use also in mainstream and flagship science missions, in combination with gravity assist propulsion. Another development in the same years is the growth of small spacecraft solutions, not in size but in numbers and individual capabilities. The on-going NASA OSIRIS-REx and JAXA HAYABUSA2 missions exemplify the trend as well as the upcoming NEA SCOUT mission or the landers MINERVA-II and MASCOT recently deployed on Ryugu. We outline likely as well as possible and efficient routes of continuation of all these developments towards a propellant-less and highly efficient class of spacecraft for small solar system body exploration: small spacecraft solar sails designed for carefree handling and equipped with carried landers and application modules, for all asteroid user communities -planetary science, planetary defence, and in-situ resource utilization. This projection builds on the experience gained in the development of deployable membrane structures leading up to the successful ground deployment test of a (20 m)² solar sail at DLR Cologne and in the 20 years since. It draws on the background of extensive trajectory optimization studies, the qualified technology of the DLR GOSSAMER-1 deployment demonstrator, and the MASCOT asteroid lander. These enable 'now-term' as well as near-term hardware solutions, and thus responsive fast-paced development. Mission types directly applicable to planetary defense include: single and Multiple NEA Rendezvous ((M)NR) for mitigation precursor, target monitoring and deflection follow-up tasks; sail-propelled head-on retrograde kinetic impactors (RKI) for mitigation; and deployable membrane based methods to modify the asteroid's properties or interact with it. The DLR-ESTEC GOSSAMER Roadmap initiated studies of missions uniquely feasible with solar sails such as Displaced L1 (DL1) space weather advance warning and monitoring and Solar Polar Orbiter (SPO) delivery which demonstrate the capability of near-term solar sails to achieve NEA rendezvous in any kind of orbit, from Earth-coorbital to extremely inclined and even retrograde orbits. For those mission types using separable payloads, such as SPO, (M)NR and RKI, design concepts can be derived from the separable Boom Sail Deployment Units characteristic of DLR GOSSAMER solar sail technology, nanolanders like MASCOT, or microlanders like the JAXA-DLR Jupiter Trojan Asteroid Lander for the OKEANOS mission which can shuttle from the sail to the asteroids visited and enable multiple NEA sample-return missions. These are an ideal match for solar sails in micro-spacecraft format whose launch configurations are compatible with ESPA and ASAP secondary payload platforms.},
  language  = {en}
}
@inproceedings{SteuerDankertLeichtScholten2019,
  author    = {Steuer-Dankert, Linda and Leicht-Scholten, Carmen},
  title     = {Diversity- and innovation management in complex engineering organizations},
  series = {7th International OFEL Conference on Governance, Management and Entrepreneurship: Embracing Diversity in Organisations. April 5th - 6th, 2019, Dubrovnik, Croatia},
  booktitle = {7th International OFEL Conference on Governance, Management and Entrepreneurship: Embracing Diversity in Organisations. April 5th - 6th, 2019, Dubrovnik, Croatia},
  editor    = {Tipurić, Darko and Hruška, Domagoj},
  publisher = {Governance Research and Development Centre (CIRU)},
  address   = {Zagreb},
  pages     = {136 -- 157},
  year      = {2019},
  abstract  = {Diversity is increasingly being addressed as an innovation-promoting factor. For this reason, companies and institutions tackle the integration of a diversity management approach that enables a heterogenic perspective on innovation development. However, system-theoretical frameworks state that the implementation of diversity measures that are not tailored to the needs of the organization often leads to a rejection or reactivity with regard to the management approach. In this context, especially organizations, which are characterized by a specific hierarchical structure, a dominant habitus or specialist culture, must face the challenge of realizing a sustainable change of the corporate culture that sets the basis for implementing diversity management approaches. The presented research project focuses on analyzing the situation in a huge scientific collaborative project - so called Cluster of Excellence (CoE) - with the aim to implement a diversity - and innovation management strategy. Considering the influencing determinants, the CoE is characterized by its embeddedness in the scientific system, a complex organizational structure, and a high fluctuation rate. The paper presents a systemic approach of reflecting these factors in order to develop a diversity- and innovation management strategy. In this frame, the results of a quantitative survey of CoE employees and derived mindset-types are presented. The results show a need for taking different mindset-types into account, to be able to develop a tailored management strategy. The aim of the project is to give recommendations for developing a sustainable management concept that promotes both diversity and innovation by drawing on the persisting mindsets of organization members while reflecting top down as well as bottom up factors of implementation processes as well as the psychology of change. This paper addresses all who are concerned with the management of human resources in innovation processes and are striving for a cultural change within the framework of complex organizations.},
  language  = {en}
}
@inproceedings{ChavezBermudezWollert2019,
  author    = {Chavez Bermudez, Victor Francisco and Wollert, J{\"o}rg},
  title     = {Gateway for Automation Controllers and Cloud based Voice Recognition Services},
  series = {KommA, 10. Jahreskolloquium Kommunikation in der Automation},
  booktitle = {KommA, 10. Jahreskolloquium Kommunikation in der Automation},
  publisher = {Institut f{\"u}r Automation und Kommunikation},
  address   = {Magdeburg},
  organization    = {KommA, 2019, Jahreskolloquium Kommunikation in der Automation, 10., Lemgo, DE, 2019-11-20 - 2019-11-21},
  isbn      = {978-3-944722-85-6},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{HofmannLimpertMatareetal.2019,
  author    = {Hofmann, Till and Limpert, Nicolas and Matar{\´e}, Viktor and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Winning the RoboCup Logistics League with Fast Navigation, Precise Manipulation, and Robust Goal Reasoning},
  series = {RoboCup 2019: Robot World Cup XXIII. RoboCup},
  booktitle = {RoboCup 2019: Robot World Cup XXIII. RoboCup},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-35699-6},
  doi       = {10.1007/978-3-030-35699-6_41},
  pages     = {504 -- 516},
  year      = {2019},
  language  = {en}
}
@inproceedings{FingerGoettenBraunetal.2019,
  author    = {Finger, Felix and G{\"o}tten, Falk and Braun, Carsten and Bil, C.},
  title     = {On Aircraft Design Under the Consideration of Hybrid-Electric Propulsion Systems},
  series = {APISAT 2018: The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018)},
  booktitle = {APISAT 2018: The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018)},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-13-3305-7},
  doi       = {10.1007/978-981-13-3305-7_99},
  pages     = {1261 -- 1272},
  year      = {2019},
  abstract  = {A hybrid-electric propulsion system combines the advantages of fuel-based systems and battery powered systems and offers new design freedom. To take full advantage of this technology, aircraft designers must be aware of its key differences, compared to conventional, carbon-fuel based, propulsion systems. This paper gives an overview of the challenges and potential benefits associated with the design of aircraft that use hybrid-electric propulsion systems. It offers an introduction of the most popular hybrid-electric propulsion architectures and critically assess them against the conventional and fully electric propulsion configurations. The effects on operational aspects and design aspects are covered. Special consideration is given to the application of hybrid-electric propulsion technology to both unmanned and vertical take-off and landing aircraft. The authors conclude that electric propulsion technology has the potential to revolutionize aircraft design. However, new and innovative methods must be researched, to realize the full benefit of the technology.},
  language  = {en}
}
@inproceedings{GoettenFingerBraunetal.2019,
  author    = {G{\"o}tten, Falk and Finger, Felix and Braun, Carsten and Havermann, Marc and Bil, C. and Gomez, F.},
  title     = {Empirical Correlations for Geometry Build-Up of Fixed Wing Unmanned Air Vehicles},
  series = {APISAT 2018: The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018)},
  booktitle = {APISAT 2018: The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018)},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-13-3305-7},
  doi       = {10.1007/978-981-13-3305-7_109},
  pages     = {1365 -- 1381},
  year      = {2019},
  abstract  = {The results of a statistical investigation of 42 fixed-wing, small to medium sized (20 kg-1000 kg) reconnaissance unmanned air vehicles (UAVs) are presented. Regression analyses are used to identify correlations of the most relevant geometry dimensions with the UAV's maximum take-off mass. The findings allow an empirical based geometry-build up for a complete unmanned aircraft by referring to its take-off mass only. This provides a bridge between very early design stages (initial sizing) and the later determination of shapes and dimensions. The correlations might be integrated into a UAV sizing environment and allow designers to implement more sophisticated drag and weight estimation methods in this process. Additional information on correlation factors for a rough drag estimation methodology indicate how this technique can significantly enhance the accuracy of early design iterations.},
  language  = {en}
}
@inproceedings{AuthCzarneckiBensberg2019,
  author    = {Auth, Gunnar and Czarnecki, Christian and Bensberg, Frank},
  title     = {Impact of robotic process automation on enterprise architectures},
  series = {GI Edition Proceedings Band 295 INFORMATIK 2019, Workshop-Beitr{\"a}ge},
  booktitle = {GI Edition Proceedings Band 295 INFORMATIK 2019, Workshop-Beitr{\"a}ge},
  editor    = {Draude, Claude and Lange, Martin and Sick, Bernhard and Gesellschaft f{\"u}r Informatik e.V. (GI),},
  publisher = {K{\"o}llen},
  address   = {Bonn},
  isbn      = {9783885796893},
  issn      = {1617-5468},
  doi       = {10.18420/inf2019_ws05},
  pages     = {59 -- 65},
  year      = {2019},
  abstract  = {The initial idea of Robotic Process Automation (RPA) is the automation of business processes through the presentation layer of existing application systems. For this simple emulation of user input and output by software robots, no changes of the systems and architecture is required. However, considering strategic aspects of aligning business and technology on an enterprise level as well as the growing capabilities of RPA driven by artificial intelligence, interrelations between RPA and Enterprise Architecture (EA) become visible and pose new questions. In this paper we discuss the relationship between RPA and EA in terms of perspectives and implications. As workin- progress we focus on identifying new questions and research opportunities related to RPA and EA.},
  language  = {en}
}
@inproceedings{BrockmannSultanowCzarnecki2019,
  author    = {Brockmann, Carsten and Sultanow, Eldar and Czarnecki, Christian},
  title     = {Is enterprise architecture still relevant in the digital age?},
  series = {GI Edition Proceedings Band 295 INFORMATIK 2019, Workshop-Beitr{\"a}ge},
  booktitle = {GI Edition Proceedings Band 295 INFORMATIK 2019, Workshop-Beitr{\"a}ge},
  editor    = {Draude, Claude and Lange, Martin and Sick, Bernhard},
  publisher = {K{\"o}llen},
  address   = {Bonn},
  isbn      = {9783885796893},
  issn      = {1617-5468},
  doi       = {10.18420/inf2019_ws01},
  pages     = {21 -- 21},
  year      = {2019},
  language  = {en}
}
@inproceedings{EngemannBadriWenningetal.2019,
  author    = {Engemann, Heiko and Badri, Sriram and Wenning, Marius and Kallweit, Stephan},
  title     = {Implementation of an Autonomous Tool Trolley in a Production Line},
  series = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980},
  booktitle = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-19648-6},
  doi       = {10.1007/978-3-030-19648-6_14},
  pages     = {117 -- 125},
  year      = {2019},
  language  = {en}
}
@inproceedings{GrundmannBauerBorchersetal.2019,
  author    = {Grundmann, Jan Thimo and Bauer, Wlademar and Borchers, Kai and Dumont, Etienne and Grimm, Christian D. and Ho, Tra-Mi and Jahnke, Rico and Koch, Aaron D. and Lange, Caroline and Maiwald, Volker and Meß, Jan-Gerd and Mikulz, Eugen and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Sasaki, Kaname and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and Toth, Norbert and Ceriotti, Matteo and McInnes, Colin and Peloni, Alessandro and Biele, Jens and Krause, Christian and Dachwald, Bernd and Hercik, David and Lichtenheldt, Roy and Wolff, Friederike and Koncz, Alexander and Pelivan, Ivanka and Schmitz, Nicole and Boden, Ralf and Riemann, Johannes and Seboldt, Wolfgang and Wejmo, Elisabet and Ziach, Christian and Mikschl, Tobias and Montenegro, Sergio and Ruffer, Michael and Cordero, Federico and Tardivel, Simon},
  title     = {Solar sails for planetary defense \& high-energy missions},
  series = {IEEE Aerospace Conference Proceedings},
  booktitle = {IEEE Aerospace Conference Proceedings},
  doi       = {10.1109/AERO.2019.8741900},
  pages     = {1 -- 21},
  year      = {2019},
  abstract  = {20 years after the successful ground deployment test of a (20 m) 2 solar sail at DLR Cologne, and in the light of the upcoming U.S. NEAscout mission, we provide an overview of the progress made since in our mission and hardware design studies as well as the hardware built in the course of our solar sail technology development. We outline the most likely and most efficient routes to develop solar sails for useful missions in science and applications, based on our developed `now-term' and near-term hardware as well as the many practical and managerial lessons learned from the DLR-ESTEC Gossamer Roadmap. Mission types directly applicable to planetary defense include single and Multiple NEA Rendezvous ((M)NR) for precursor, monitoring and follow-up scenarios as well as sail-propelled head-on retrograde kinetic impactors (RKI) for mitigation. Other mission types such as the Displaced L1 (DL1) space weather advance warning and monitoring or Solar Polar Orbiter (SPO) types demonstrate the capability of near-term solar sails to achieve asteroid rendezvous in any kind of orbit, from Earth-coorbital to extremely inclined and even retrograde orbits. Some of these mission types such as SPO, (M)NR and RKI include separable payloads. For one-way access to the asteroid surface, nanolanders like MASCOT are an ideal match for solar sails in micro-spacecraft format, i.e. in launch configurations compatible with ESPA and ASAP secondary payload platforms. Larger landers similar to the JAXA-DLR study of a Jupiter Trojan asteroid lander for the OKEANOS mission can shuttle from the sail to the asteroids visited and enable multiple NEA sample-return missions. The high impact velocities and re-try capability achieved by the RKI mission type on a final orbit identical to the target asteroid's but retrograde to its motion enables small spacecraft size impactors to carry sufficient kinetic energy for deflection.},
  language  = {en}
}
@inproceedings{SadeghfamSadeghiAhangarElgamaletal.2019,
  author    = {Sadeghfam, Arash and Sadeghi-Ahangar, A. and Elgamal, Abdelrahman and Heuermann, Holger},
  title     = {Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications},
  series = {IEEE MTT-S International Microwave Symposium Digest},
  booktitle = {IEEE MTT-S International Microwave Symposium Digest},
  isbn      = {978-172811309-8},
  pages     = {63 -- 66},
  year      = {2019},
  language  = {en}
}
@inproceedings{UlmerBraunLaietal.2019,
  author    = {Ulmer, Jessica and Braun, Sebastian and Lai, Chow Yin and Cheng, Chi-Tsun and Wollert, J{\"o}rg},
  title     = {Generic integration of VR and AR in product lifecycles based on CAD models},
  series = {Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  booktitle = {Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  year      = {2019},
  language  = {en}
}
@inproceedings{HingleyDikta2019,
  author    = {Hingley, Peter and Dikta, Gerhard},
  title     = {Finding a well performing box-jenkins forecasting model for annualised patent filings counts},
  series = {International Symposium on Forecasting, Thessaloniki, Greece, June 2019},
  booktitle = {International Symposium on Forecasting, Thessaloniki, Greece, June 2019},
  pages     = {24 Folien},
  year      = {2019},
  language  = {en}
}
@inproceedings{FingerGoettenBraunetal.2019,
  author    = {Finger, Felix and G{\"o}tten, Falk and Braun, Carsten and Bil, Cees},
  title     = {Cost Estimation Methods for Hybrid-Electric General Aviation Aircraft},
  series = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  booktitle = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  pages     = {1 -- 13},
  year      = {2019},
  language  = {en}
}
@inproceedings{FingerKhalsaKreyeretal.2019,
  author    = {Finger, Felix and Khalsa, R. and Kreyer, J{\"o}rg and Mayntz, Joscha and Braun, Carsten and Dahmann, Peter and Esch, Thomas and Kemper, Hans and Schmitz, O. and Bragard, Michael},
  title     = {An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft},
  series = {Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt},
  pages     = {15 Seiten},
  year      = {2019},
  abstract  = {In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented.},
  language  = {en}
}
@inproceedings{QuitterMarinoBauschat2019,
  author    = {Quitter, Julius and Marino, Matthew and Bauschat, J.-Michael},
  title     = {Highly Non-Planar Aircraft Configurations: Estimation of Flight Mechanical Derivatives Using Low-Order Methods},
  series = {Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany},
  pages     = {10 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{FunkeBeckmannAbanteriba2019,
  author    = {Funke, Harald and Beckmann, Nils and Abanteriba, Sylvester},
  title     = {Development and Testing of a FuelFlex Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications With Variable Hydrogen Methane Mixtures},
  series = {ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. June 17-21, 2019 Phoenix, Arizona, USA. Volume 4A: Combustion, Fuels, and Emissions},
  booktitle = {ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. June 17-21, 2019 Phoenix, Arizona, USA. Volume 4A: Combustion, Fuels, and Emissions},
  isbn      = {978-0-7918-5861-5},
  doi       = {10.1115/GT2019-90095},
  pages     = {11 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{HorikawaOkadaUtoetal.2019,
  author    = {Horikawa, Atsushi and Okada, Kunio and Uto, Takahiro and Uchiyama, Yuta and Wirsum, Manfred and Funke, Harald and Kusterer, Karsten},
  title     = {Application of Low NOx Micro-mix Hydrogen Combustion to 2MW Class Industrial Gas Turbine Combustor},
  series = {Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan},
  booktitle = {Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan},
  isbn      = {978-4-89111-010-9},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {en}
}
@inproceedings{FunkeBeckmann2019,
  author    = {Funke, Harald and Beckmann, Nils},
  title     = {Flexible Fuel Operation of a Dry-Low-Nox Micromix Combustor with Variable Hydrogen Methane Mixtures},
  series = {Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan},
  booktitle = {Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan},
  isbn      = {978-4-89111-010-9},
  year      = {2019},
  language  = {en}
}
@inproceedings{StrieganStruthDickhoffetal.2019,
  author    = {Striegan, Constantin J. D. and Struth, Benjamin and Dickhoff, Jens and Kusterer, Karsten and Funke, Harald and Bohn, Dieter},
  title     = {Numerical Simulations of the Micromix DLN Hydrogen Combustion Technology with LES and Comparison to Results of RANS and Experimental Data},
  series = {Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan.},
  booktitle = {Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan.},
  isbn      = {978-4-89111-010-9},
  pages     = {1 -- 9},
  year      = {2019},
  language  = {en}
}
@inproceedings{GerhardsSchleserOttenetal.2019,
  author    = {Gerhards, Benjamin and Schleser, Markus and Otten,, Christian and Schwarz, Alexander and Gebhardt, Andreas},
  title     = {Innovative Laser Beam Joining Technology for Additive Manufactured Parts},
  series = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  booktitle = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{GerhardsSchleserOtten2019,
  author    = {Gerhards, Benjamin and Schleser, Markus and Otten, Christian},
  title     = {Advancements of mobile vacuum laser welding for industrial thick sheet applications},
  series = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  booktitle = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{ValeroKramerBungetal.2019,
  author    = {Valero, Daniel and Kramer, Matthias and Bung, Daniel B. and Chanson, Hubert},
  title     = {A stochastic bubble generator for air-water flow research},
  series = {E-proceedings of the 38th IAHR World Congress, September 1-6, 2019, Panama City, Panama},
  booktitle = {E-proceedings of the 38th IAHR World Congress, September 1-6, 2019, Panama City, Panama},
  doi       = {10.3850/38WC092019-0909},
  pages     = {5714 -- 5721},
  year      = {2019},
  language  = {en}
}
@inproceedings{TullisCrookstonBung2019,
  author    = {Tullis, Blake P. and Crookston, Brian M. and Bung, Daniel B.},
  title     = {Weir head-discharge relationships: A multi-lab exercise},
  series = {E-proceedings of the 38th IAHR World Congress September 1-6, 2019, Panama City, Panama},
  booktitle = {E-proceedings of the 38th IAHR World Congress September 1-6, 2019, Panama City, Panama},
  pages     = {1 -- 15},
  year      = {2019},
  language  = {en}
}
@inproceedings{BungOertel2019,
  author    = {Bung, Daniel B. and Oertel, Mario},
  title     = {Wave breaking over a submerged horizontal plate: Optical Flow, LES and RANS},
  series = {E-proceedings of the 38th IAHR World Congress September 1-6, 2019, Panama City, Panama},
  booktitle = {E-proceedings of the 38th IAHR World Congress September 1-6, 2019, Panama City, Panama},
  doi       = {10.3850/38WC092019-0509},
  pages     = {3690 -- 3698},
  year      = {2019},
  language  = {en}
}
@inproceedings{BraunChengLaietal.2019,
  author    = {Braun, Sebastian and Cheng, Chi-Tsun and Lai, Chow Yin and Wollert, J{\"o}rg},
  title     = {Microservice Architecture for Automation - Realization by the example of a model-factory's manufacturing execution system},
  series = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  booktitle = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  pages     = {33 -- 37},
  year      = {2019},
  language  = {en}
}
@inproceedings{BergmannGraebenerWildetal.2019,
  author    = {Bergmann, Kevin and Gr{\"a}bener, Josefine and Wild, Dominik and Ulfers, H. and Czupalla, Markus},
  title     = {Study on thermal stabilization of a GEO-stationary telescope baffling system by integral application of phase change material},
  series = {International Conference on Environmental Systems},
  booktitle = {International Conference on Environmental Systems},
  pages     = {1 -- 14},
  year      = {2019},
  abstract  = {The utilization of phase change material (PCM) for latent heat storage and thermal control of spacecraft has been demonstrated in the past in few missions only. One limiting factor was the fact that all concepts developed so far envisioned the PCM to be applied as an additional capacitor, encapsulated in its own housing, leading to mass, efficiency and accommodation challenges. Recently, the application of PCM within the scan cavity of a GEOS type satellite has been suggested, in order to tackle thermal issues due to direct sun intrusion (Choi, M., 2014). However, the application of PCM in such complex mechanical structures is extremely challenging. A new concept to tackle this issue is currently under development at the FH Aachen University of Applied Sciences. The concept "Infused Thermal Solutions (ITS)" is based on the idea to 3D print metallic structures in their regular functional shape, but double walled with internal lattice support structures, allowing the infusion of a PCM layer directly into the voids and eliminating the need for additional parts and interfaces. Together with OHB System, FH Aachen theoretically studied the application of this technology to the Meteosat Third Generation (MTG) Infra-Red Sounder (IRS) instrument. The study focuses on the scan cavity and entrance baffling assembly (EBA) of the IRS. It consists of thermal analyses, 3D-redesign and bread boarding of a scaled and PCM infused EBA version. In the thermal design of the alternative EBA, PCM was applied directly into the EBA, simulating the worst hot case sun intrusion of the mission. By applying 4kg of PCM (to a 60kg baffle) the EBA temperature excursions during sun intrusion were limited from 140K to 30K, leading to a significant thermo-opto-elastic performance gain. This paper introduces the ITS concept development status.},
  language  = {en}
}
@inproceedings{MarinkovićButenweg2019,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Experimental and numerical analysis of RC frames with decoupled masonry infills},
  series = {7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  booktitle = {7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  editor    = {Papadrakakis, Manolis and Fragiadakis, Michalis},
  publisher = {National Technical University of Athens},
  address   = {Athen},
  isbn      = {978-618-82844-5-6},
  issn      = {2623-3347},
  doi       = {10.7712/120119.7088.18845},
  pages     = {2464 -- 2479},
  year      = {2019},
  abstract  = {Masonry infill walls are commonly used in reinforced concrete (RC) frame structures, also in seismically active areas, although they often experience serious damage during earthquakes. One of the main reasons for their poor behaviour is the connection to the frame, which is usually constructed using mortar. This paper describes the novel solution for infill/frame connection based on application of elastomeric material between them. The system called INODIS (Innovative Decoupled Infill System) has the aim to postpone the activation of infill in in-plane direction and at the same time to provide sufficient out-of-plane support. First, experimental tests on infilled frame specimens are presented and the comparison of the results between traditionally infilled frames and infilled frames with the INODIS system are given. The results are then used for calibration and validation of numerical model, which can be further employed for investigating the influence of some material parameters on the behaviour of infilled frames with the INODIS system.},
  language  = {en}
}
@inproceedings{KetelhutGoellBraunsteinetal.2019,
  author    = {Ketelhut, Maike and G{\"o}ll, Fabian and Braunstein, Bjoern and Albracht, Kirsten and Abel, Dirk},
  title     = {Iterative learning control of an industrial robot for neuromuscular training},
  series = {2019 IEEE Conference on Control Technology and Applications},
  booktitle = {2019 IEEE Conference on Control Technology and Applications},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-7281-2767-5 (ePub)},
  doi       = {10.1109/CCTA.2019.8920659},
  pages     = {7 Seiten},
  year      = {2019},
  abstract  = {Effective training requires high muscle forces potentially leading to training-induced injuries. Thus, continuous monitoring and controlling of the loadings applied to the musculoskeletal system along the motion trajectory is required. In this paper, a norm-optimal iterative learning control algorithm for the robot-assisted training is developed. The algorithm aims at minimizing the external knee joint moment, which is commonly used to quantify the loading of the medial compartment. To estimate the external knee joint moment, a musculoskeletal lower extremity model is implemented in OpenSim and coupled with a model of an industrial robot and a force plate mounted at its end-effector. The algorithm is tested in simulation for patients with varus, normal and valgus alignment of the knee. The results show that the algorithm is able to minimize the external knee joint moment in all three cases and converges after less than seven iterations.},
  language  = {en}
}
@inproceedings{EltesterFerreinSchiffer2020,
  author    = {Eltester, Niklas Sebastian and Ferrein, Alexander and Schiffer, Stefan},
  title     = {A smart factory setup based on the RoboCup logistics league},
  series = {2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)},
  booktitle = {2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)},
  publisher = {IEEE},
  doi       = {10.1109/ICPS48405.2020.9274766},
  pages     = {297 -- 302},
  year      = {2020},
  abstract  = {In this paper we present SMART-FACTORY, a setup for a research and teaching facility in industrial robotics that is based on the RoboCup Logistics League. It is driven by the need for developing and applying solutions for digital production. Digitization receives constantly increasing attention in many areas, especially in industry. The common theme is to make things smart by using intelligent computer technology. Especially in the last decade there have been many attempts to improve existing processes in factories, for example, in production logistics, also with deploying cyber-physical systems. An initiative that explores challenges and opportunities for robots in such a setting is the RoboCup Logistics League. Since its foundation in 2012 it is an international effort for research and education in an intra-warehouse logistics scenario. During seven years of competition a lot of knowledge and experience regarding autonomous robots was gained. This knowledge and experience shall provide the basis for further research in challenges of future production. The focus of our SMART-FACTORY is to create a stimulating environment for research on logistics robotics, for teaching activities in computer science and electrical engineering programmes as well as for industrial users to study and explore the feasibility of future technologies. Building on a very successful history in the RoboCup Logistics League we aim to provide stakeholders with a dedicated facility oriented at their individual needs.},
  language  = {en}
}
@inproceedings{SchmidtsKraftWinkensetal.2020,
  author    = {Schmidts, Oliver and Kraft, Bodo and Winkens, Marvin and Z{\"u}ndorf, Albert},
  title     = {Catalog integration of low-quality product data by attribute label ranking},
  series = {Proceedings of the 9th International Conference on Data Science, Technology and Applications - Volume 1: DATA},
  booktitle = {Proceedings of the 9th International Conference on Data Science, Technology and Applications - Volume 1: DATA},
  isbn      = {978-989-758-440-4},
  doi       = {10.5220/0009831000900101},
  pages     = {90 -- 101},
  year      = {2020},
  language  = {en}
}
@inproceedings{BraunChengDoweyetal.2020,
  author    = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Survey on Security Concepts to Adapt Flexible Manufacturing and Operations Management based upon Multi-Agent Systems},
  series = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)},
  booktitle = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)},
  doi       = {10.1109/ISIE45063.2020.9152210},
  year      = {2020},
  language  = {en}
}
@inproceedings{EggertStanke2020,
  author    = {Eggert, Mathias and Stanke, Max-Alexander},
  title     = {Adoption of Integrated Voice Assistants in Health Care- Requirements and Design Guidelines},
  series = {15th International Conference on Wirtschaftsinformatik, March 08-11, 2020 Potsdam, Germany},
  booktitle = {15th International Conference on Wirtschaftsinformatik, March 08-11, 2020 Potsdam, Germany},
  doi       = {10.30844/wi_2020_k2-eggert},
  pages     = {1 -- 16},
  year      = {2020},
  language  = {en}
}
@inproceedings{EggertEdelbauer2020,
  author    = {Eggert, Mathias and Edelbauer, Thomas Rudolf},
  title     = {Gamified Information Systems for Assisted Living Facilities - Relevant Design Guidelines, Affordances and Adoption Barriers},
  series = {15th International Conference on Wirtschaftsinformatik, March 08-11, 2020 Potsdam, Germany},
  booktitle = {15th International Conference on Wirtschaftsinformatik, March 08-11, 2020 Potsdam, Germany},
  doi       = {10.30844/wi_2020_f3-eggert},
  pages     = {1 -- 16},
  year      = {2020},
  language  = {en}
}
@inproceedings{LorenzAltherrPelz2020,
  author    = {Lorenz, Imke-Sophie and Altherr, Lena and Pelz, Peter F.},
  title     = {Assessing and Optimizing the Resilience of Water Distribution Systems Using Graph-Theoretical Metrics},
  series = {Operations Research Proceedings 2019},
  booktitle = {Operations Research Proceedings 2019},
  editor    = {Neufeld, Janis S. and Buscher, Udo and Lasch, Rainer and M{\"o}st, Dominik and Sch{\"o}nberger, J{\"o}rn},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-48439-2},
  doi       = {10.1007/978-3-030-48439-2_63},
  pages     = {521 -- 527},
  year      = {2020},
  abstract  = {Water distribution systems are an essential supply infrastructure for cities. Given that climatic and demographic influences will pose further challenges for these infrastructures in the future, the resilience of water supply systems, i.e. their ability to withstand and recover from disruptions, has recently become a subject of research. To assess the resilience of a WDS, different graph-theoretical approaches exist. Next to general metrics characterizing the network topology, also hydraulic and technical restrictions have to be taken into account. In this work, the resilience of an exemplary water distribution network of a major German city is assessed, and a Mixed-Integer Program is presented which allows to assess the impact of capacity adaptations on its resilience.},
  language  = {en}
}
@inproceedings{LeiseSimonAltherr2020,
  author    = {Leise, Philipp and Simon, Nicolai and Altherr, Lena},
  title     = {Comparison of Piecewise Linearization Techniques to Model Electric Motor Efficiency Maps: A Computational Study},
  series = {Operations Research Proceedings 2019},
  booktitle = {Operations Research Proceedings 2019},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-48439-2},
  doi       = {10.1007/978-3-030-48439-2_55},
  pages     = {457 -- 463},
  year      = {2020},
  abstract  = {To maximize the travel distances of battery electric vehicles such as cars or buses for a given amount of stored energy, their powertrains are optimized energetically. One key part within optimization models for electric powertrains is the efficiency map of the electric motor. The underlying function is usually highly nonlinear and nonconvex and leads to major challenges within a global optimization process. To enable faster solution times, one possibility is the usage of piecewise linearization techniques to approximate the nonlinear efficiency map with linear constraints. Therefore, we evaluate the influence of different piecewise linearization modeling techniques on the overall solution process and compare the solution time and accuracy for methods with and without explicitly used binary variables.},
  language  = {en}
}
@inproceedings{LeiseBreuerAltherretal.2020,
  author    = {Leise, Philipp and Breuer, Tim and Altherr, Lena and Pelz, Peter F.},
  title     = {Development, validation and assessment of a resilient pumping system},
  series = {Proceedings of the Joint International Resilience Conference, JIRC2020},
  booktitle = {Proceedings of the Joint International Resilience Conference, JIRC2020},
  isbn      = {978-90-365-5095-6},
  pages     = {97 -- 100},
  year      = {2020},
  abstract  = {The development of resilient technical systems is a challenging task, as the system should adapt automatically to unknown disturbances and component failures. To evaluate different approaches for deriving resilient technical system designs, we developed a modular test rig that is based on a pumping system. On the basis of this example system, we present metrics to quantify resilience and an algorithmic approach to improve resilience. This approach enables the pumping system to automatically react on unknown disturbances and to reduce the impact of component failures. In this case, the system is able to automatically adapt its topology by activating additional valves. This enables the system to still reach a minimum performance, even in case of failures. Furthermore, timedependent disturbances are evaluated continuously, deviations from the original state are automatically detected and anticipated in the future. This allows to reduce the impact of future disturbances and leads to a more resilient system behaviour.},
  language  = {en}
}
@inproceedings{MeckMuellerAltherretal.2020,
  author    = {Meck, Marvin M. and M{\"u}ller, Tim M. and Altherr, Lena and Pelz, Peter F.},
  title     = {Improving an industrial cooling system using MINLP, considering capital and operating costs},
  series = {Operations Research Proceedings 2019},
  booktitle = {Operations Research Proceedings 2019},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-48438-5 (Print)},
  doi       = {10.1007/978-3-030-48439-2_61},
  pages     = {505 -- 512},
  year      = {2020},
  abstract  = {The chemical industry is one of the most important industrial sectors in Germany in terms of manufacturing revenue. While thermodynamic boundary conditions often restrict the scope for reducing the energy consumption of core processes, secondary processes such as cooling offer scope for energy optimisation. In this contribution, we therefore model and optimise an existing cooling system. The technical boundary conditions of the model are provided by the operators, the German chemical company BASF SE. In order to systematically evaluate different degrees of freedom in topology and operation, we formulate and solve a Mixed-Integer Nonlinear Program (MINLP), and compare our optimisation results with the existing system.},
  language  = {en}
}
@inproceedings{MuellerAltherrLeiseetal.2020,
  author    = {M{\"u}ller, Tim M. and Altherr, Lena and Leise, Philipp and Pelz, Peter F.},
  title     = {Optimization of pumping systems for buildings: Experimental validation of different degrees of model detail on a modular test rig},
  series = {Operations Research Proceedings 2019},
  booktitle = {Operations Research Proceedings 2019},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-48438-5},
  doi       = {10.1007/978-3-030-48439-2_58},
  pages     = {481 -- 488},
  year      = {2020},
  abstract  = {Successful optimization requires an appropriate model of the system under consideration. When selecting a suitable level of detail, one has to consider solution quality as well as the computational and implementation effort. In this paper, we present a MINLP for a pumping system for the drinking water supply of high-rise buildings. We investigate the influence of the granularity of the underlying physical models on the solution quality. Therefore, we model the system with a varying level of detail regarding the friction losses, and conduct an experimental validation of our model on a modular test rig. Furthermore, we investigate the computational effort and show that it can be reduced by the integration of domain-specific knowledge.},
  language  = {en}
}
@inproceedings{PhilippBrillowskiDammersetal.2020,
  author    = {Philipp, Brauner and Brillowski, Florian Sascha and Dammers, Hannah and K{\"o}nigs, Peter and Kordtomeikel, Frauke Carole and Petruck, Henning and Schaar, Anne Kathrin and Schmitz, Seth and Steuer-Dankert, Linda and Mertens, Alexander and Gries, Thomas and Leicht-Scholten, Carmen and Nagel, Saskia K. and Nitsch, Verena and Schuh, G{\"u}nther and Ziefle, Martina},
  title     = {A research framework for human aspects in the internet of production: an intra-company perspective},
  series = {Advances in Manufacturing, Production Management and Process Control: Proceedings of the AHFE 2020 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 16-20, 2020, USA},
  booktitle = {Advances in Manufacturing, Production Management and Process Control: Proceedings of the AHFE 2020 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 16-20, 2020, USA},
  editor    = {Mrugalska, Beata and Trzcielinski, Stefan and Karwowski, Waldemar and Nicolantonio, Massimo Di and Roossi, Emilio},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-51980-3},
  doi       = {10.1007/978-3-030-51981-0_1},
  pages     = {3 -- 17},
  year      = {2020},
  abstract  = {Digitalization in the production sector aims at transferring concepts and methods from the Internet of Things (IoT) to the industry and is, as a result, currently reshaping the production area. Besides technological progress, changes in work processes and organization are relevant for a successful implementation of the "Internet of Production" (IoP). Focusing on the labor organization and organizational procedures emphasizes to consider intra-company factors such as (user) acceptance, ethical issues, and ergonomics in the context of IoP approaches. In the scope of this paper, a research approach is presented that considers these aspects from an intra-company perspective by conducting studies on the shop floor, control level and management level of companies in the production area. Focused on four central dimensions—governance, organization, capabilities, and interfaces—this contribution presents a research framework that is focused on a systematic integration and consideration of human aspects in the realization of the IoP.},
  language  = {en}
}
@inproceedings{GoettenFingerHavermannetal.2020,
  author    = {G{\"o}tten, Falk and Finger, Felix and Havermann, Marc and Braun, Carsten and Marino, Matthew and Bil, Cees},
  title     = {Full Configuration Drag Estimation of Small-to-Medium Range UAVs and its Impact on Initial Sizing Optimization},
  series = {Deutscher Luft- und Raumfahrtkongress - DLRK 2020},
  booktitle = {Deutscher Luft- und Raumfahrtkongress - DLRK 2020},
  year      = {2020},
  language  = {en}
}
@inproceedings{GeibenGoettenHavermann2020,
  author    = {Geiben, Benedikt and G{\"o}tten, Falk and Havermann, Marc},
  title     = {Aerodynamic analysis of a winged sub-orbital spaceplane},
  series = {Deutscher Luft- und Raumfahrtkongress - DLRK 2020},
  booktitle = {Deutscher Luft- und Raumfahrtkongress - DLRK 2020},
  year      = {2020},
  language  = {en}
}
@inproceedings{HippeFingerGoettenetal.2020,
  author    = {Hippe, Jonas and Finger, Felix and G{\"o}tten, Falk and Braun, Carsten},
  title     = {Propulsion System Qualification of a 25 kg VTOL-UAV: Hover Performance of Single and Coaxial Rotors and Wind-Tunnel Experiments on Cruise Propellers},
  series = {Deutscher Luft- und Raumfahrtkongress - DLRK 2020},
  booktitle = {Deutscher Luft- und Raumfahrtkongress - DLRK 2020},
  year      = {2020},
  language  = {en}
}
@inproceedings{ChavezBermudezWollert2020,
  author    = {Chavez Bermudez, Victor Francisco and Wollert, J{\"o}rg},
  title     = {Arduino based Framework for Rapid Application Development of a Generic IO-Link interface},
  series = {Kommunikation und Bildverarbeitung in der Automation},
  booktitle = {Kommunikation und Bildverarbeitung in der Automation},
  publisher = {Springer Vieweg},
  address   = {Berlin},
  isbn      = {978-3-662-59895-5},
  doi       = {10.1007/978-3-662-59895-5_2},
  pages     = {21 -- 33},
  year      = {2020},
  abstract  = {The implementation of IO-Link in the automation industry has increased over the years. Its main advantage is it offers a digital point-to-point plugand-play interface for any type of device or application. This simplifies the communication between devices and increases productivity with its different features like self-parametrization and maintenance. However, its complete potential is not always used. The aim of this paper is to create an Arduino based framework for the development of generic IO-Link devices and increase its implementation for rapid prototyping. By generating the IO device description file (IODD) from a graphical user interface, and further customizable options for the device application, the end-user can intuitively develop generic IO-Link devices. The peculiarity of this framework relies on its simplicity and abstraction which allows to implement any sensor functionality and virtually connect any type of device to an IO-Link master. This work consists of the general overview of the framework, the technical background of its development and a proof of concept which demonstrates the workflow for its implementation.},
  language  = {en}
}
@inproceedings{HoegenDonckerRuetters2020,
  author    = {Hoegen, Anne von and Doncker, Rik W. De and R{\"u}tters, Ren{\´e}},
  title     = {Teaching Digital Control of Operational Amplifier Processes with a LabVIEW Interface and Embedded Hardware},
  series = {The 23rd International Conference on Electrical Machines and Systems (ICEMS), Hamamatsu, Japan},
  booktitle = {The 23rd International Conference on Electrical Machines and Systems (ICEMS), Hamamatsu, Japan},
  doi       = {10.23919/ICEMS50442.2020.9290928},
  pages     = {1117 -- 1122},
  year      = {2020},
  language  = {en}
}
@inproceedings{MarinkovicButenweg2020,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays},
  series = {17th International Conference -From historical to sustainable masonry, Krakow, Poland, July 5-8, 2020},
  booktitle = {17th International Conference -From historical to sustainable masonry, Krakow, Poland, July 5-8, 2020},
  doi       = {10.1201/9781003098508-72},
  pages     = {1 -- 7},
  year      = {2020},
  language  = {en}
}
@inproceedings{MarkinkovicButenwegPaveseetal.2020,
  author    = {Markinkovic, Marko and Butenweg, Christoph and Pavese, A. and Lanese, I. and Hoffmeister, B. and Pinkawa, M. and Vulcu, C. and Bursi, O. and Nardin, C. and Paolacci, F. and Quinci, G. and Fragiadakis, M. and Weber, F. and Huber, P. and Renault, P. and G{\"u}ndel, M. and Dyke, S. and Ciucci, M. and Marino, A.},
  title     = {Investigation of the seismic behaviour of structural and nonstructural components in industrial facilities by means of shaking table tests},
  series = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  booktitle = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  isbn      = {978-3-86359-729-0},
  pages     = {159 -- 172},
  year      = {2020},
  language  = {en}
}
@inproceedings{CacciatoreButenweg2020,
  author    = {Cacciatore, Pamela and Butenweg, Christoph},
  title     = {Seismic safety of cylindrical granular material steel silos under seismic loading},
  series = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  booktitle = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  isbn      = {978-3-86359-729-0},
  pages     = {231 -- 244},
  year      = {2020},
  language  = {en}
}
@inproceedings{MichelRosinButenwegetal.2020,
  author    = {Michel, Philipp and Rosin, Julia and Butenweg, Christoph and Klinkel, Sven},
  title     = {Soil-dependent earthquake spectra in the analysis of liquid-storage-tanks on compliant soil},
  series = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  booktitle = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  isbn      = {978-3-86359-729-0},
  pages     = {245 -- 254},
  year      = {2020},
  language  = {en}
}
@inproceedings{SildatkeKarwanniKraftetal.2020,
  author    = {Sildatke, Michael and Karwanni, Hendrik and Kraft, Bodo and Schmidts, Oliver and Z{\"u}ndorf, Albert},
  title     = {Automated Software Quality Monitoring in Research Collaboration Projects},
  series = {ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops},
  booktitle = {ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops},
  doi       = {10.1145/3387940.3391478},
  pages     = {603 -- 610},
  year      = {2020},
  language  = {en}
}
@inproceedings{IomdinaKiselevaKotliaretal.2020,
  author    = {Iomdina, Elena N. and Kiseleva, Anna A. and Kotliar, Konstantin and Luzhnov, Petr V.},
  title     = {Quantification of Choroidal Blood Flow Using the OCT-A System Based on Voxel Scan Processing},
  series = {2020 International Conference on Biomedical Innovations and Applications (BIA)},
  booktitle = {2020 International Conference on Biomedical Innovations and Applications (BIA)},
  isbn      = {978-1-7281-7073-2},
  doi       = {10.1109/BIA50171.2020.9244511},
  pages     = {41 -- 44},
  year      = {2020},
  language  = {en}
}
@inproceedings{FrantzBinderBuschetal.2020,
  author    = {Frantz, Cathy and Binder, Matthias and Busch, Konrad and Ebert, Miriam and Heinrich, Andreas and Kaczmarkiewicz, Nadine and Schl{\"o}gl-Knothe, B{\"a}rbel and Kunze, Tobias and Schuhbauer, Christian and Stetka, Markus and Schwager, Christian and Spiegel, Michael and Teixeira Boura, Cristiano Jos{\´e} and Bauer, Thomas and Bonk, Alexander and Eisen, Stefan and Funck, Bernhard},
  title     = {Basic Engineering of a High Performance Molten Salt Tower Receiver System},
  series = {Solar Paces 2020},
  booktitle = {Solar Paces 2020},
  pages     = {1 -- 10},
  year      = {2020},
  language  = {en}
}
@inproceedings{KaschSchmidtEichleretal.2020,
  author    = {Kasch, Susanne and Schmidt, Thomas and Eichler, Fabian and Thurn, Laura and Jahn, Simon and Bremen, Sebastian},
  title     = {Solution approaches and process concepts for powder bed-based melting of glass},
  series = {Industrializing Additive Manufacturing. Proceedings of AMPA2020},
  booktitle = {Industrializing Additive Manufacturing. Proceedings of AMPA2020},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-54333-4 (Print)},
  doi       = {10.1007/978-3-030-54334-1_7},
  pages     = {82 -- 95},
  year      = {2020},
  abstract  = {In the study, the process chain of additive manufacturing by means of powder bed fusion will be presented based on the material glass. In order to reliably process components additively, new concepts with different solutions were developed and investigated. Compared to established metallic materials, the properties of glass materials differ significantly. Therefore, the process control was adapted to the material glass in the investigations. With extensive parameter studies based on various glass powders such as borosilicate glass and quartz glass, scientifically proven results on powder bed fusion of glass are presented. Based on the determination of the particle properties with different methods, extensive investigations are made regarding the melting behavior of glass by means of laser beams. Furthermore, the experimental setup was steadily expanded. In addition to the integration of coaxial temperature measurement and regulation, preheating of the building platform is of major importance. This offers the possibility to perform 3D printing at the transformation temperatures of the glass materials. To improve the component's properties, the influence of a subsequent heat treatment was also investigated. The experience gained was incorporated into a new experimental system, which allows a much better exploration of the 3D printing of glass. Currently, studies are being conducted to improve surface texture, building accuracy, and geometrical capabilities using three-dimensional specimen. The contribution shows the development of research in the field of 3D printing of glass, gives an insight into the machine and process engineering as well as an outlook on the possibilities and applications.},
  language  = {en}
}