@article{QuittmannAbelAlbrachtetal.2019,
  author    = {Quittmann, Oliver J. and Abel, Thomas and Albracht, Kirsten and Str{\"u}der, Heiko K.},
  title     = {Reliability of muscular activation patterns and their alterations during incremental handcycling in able-bodied participants},
  series = {Sports Biomechanics},
  journal   = {Sports Biomechanics},
  number    = {Article in press},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1752-6116},
  doi       = {10.1080/14763141.2019.1593496},
  year      = {2019},
  language  = {en}
}
@article{SchmidtForkmannSchultzetal.2019,
  author    = {Schmidt, Katharina and Forkmann, Katarina and Schultz, Heidrun and Gratz, Marcel and Bitz, Andreas and Wiech, Katja and Bingel, Ulrike},
  title     = {Enhanced Neural Reinstatement for Evoked Facial Pain Compared With Evoked Hand Pain},
  series = {The Journal of Pain},
  journal   = {The Journal of Pain},
  number    = {In Press, Corrected Proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1526-5900},
  doi       = {10.1016/j.jpain.2019.03.003},
  year      = {2019},
  language  = {en}
}
@inproceedings{HoffmannNierenGaebetal.2019,
  author    = {Hoffmann, Katharina and Nieren, Monika and G{\"a}b, Martina and Kasper, Anna and Elbers, Gereon},
  title     = {The potential of near infrared spectroscopy (NIRS) for the environmental biomonitoring of plants},
  series = {International conference on Life Sciences and Technology},
  volume    = {276},
  booktitle = {International conference on Life Sciences and Technology},
  number    = {012009},
  issn      = {1755-1315},
  doi       = {10.1088/1755-1315/276/1/012009},
  pages     = {1 -- 3},
  year      = {2019},
  abstract  = {In the current environmental condition, the increase in pollution of the air, water, and soil indirectly will induce plants stress and decrease vegetation growth rate. These issues pay more attention to be solved by scientists worldwide. The higher level of chemical pollutants also induced the gradual changes in plants metabolism and decreased enzymatic activity. Importantly, environmental biomonitoring may play a pivotal contribution to prevent biodiversity degradation and plants stress due to pollutant exposure. Several previous studies have been done to monitor the effect of environmental changes on plants growth. Among that, Near Infrared spectroscopy (NIRS) offers an alternative way to observe the significant alteration of plant physiology caused by environmental damage related to pollution. Impairment of photosynthesis, nutrient and oxidative imbalances, and mutagenesis.},
  language  = {en}
}
@article{SchiffelsSelmer2019,
  author    = {Schiffels, Johannes and Selmer, Thorsten},
  title     = {Combinatorial assembly of ferredoxin-linked modules in Escherichia coli yields a testing platform for Rnf-complexes},
  series = {Biotechnology and Bioengineering},
  journal   = {Biotechnology and Bioengineering},
  number    = {accepted article},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/bit.27079},
  pages     = {1 -- 36},
  year      = {2019},
  language  = {en}
}
@article{KoppSchmeetsGosauetal.2019,
  author    = {Kopp, Alexander and Schmeets, Ralf and Gosau, Martin and Friedrich, Reinhard E. and Fuest, Sandra and Behbahani, Mehdi and Barbeck, Mike and Rutkowski, Rico and Burg, Simon and Kluwe, Lan and Henningsen, Anders},
  title     = {Production and Characterization of Porous Fibroin Scaffolds for Regenerative Medical Application},
  series = {In Vivo},
  volume    = {33},
  journal   = {In Vivo},
  number    = {3},
  issn      = {1791-7549},
  doi       = {10.21873/invivo.11536},
  pages     = {757 -- 762},
  year      = {2019},
  language  = {en}
}
@inproceedings{SiebigterothKraftSchmidtsetal.2019,
  author    = {Siebigteroth, Ines and Kraft, Bodo and Schmidts, Oliver and Z{\"u}ndorf, Albert},
  title     = {A Study on Improving Corpus Creation by Pair Annotation},
  series = {Proceedings of the Poster Session of the 2nd Conference on Language, Data and Knowledge (LDK-PS 2019)},
  booktitle = {Proceedings of the Poster Session of the 2nd Conference on Language, Data and Knowledge (LDK-PS 2019)},
  issn      = {1613-0073},
  pages     = {40 -- 44},
  year      = {2019},
  language  = {en}
}
@article{KodomskoiKotliarSchroederetal.2019,
  author    = {Kodomskoi, Leonid and Kotliar, Konstantin and Schr{\"o}der, Andreas and Weiss, Michael and Hille, Konrad},
  title     = {Suture-Probe Canaloplasty as an Alternative to Canaloplasty using the iTrack™ Microcatheter},
  series = {Journal of Glaucoma},
  journal   = {Journal of Glaucoma},
  number    = {Epub ahead of print},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  issn      = {1057-0829},
  doi       = {10.1097/IJG.0000000000001321},
  year      = {2019},
  language  = {en}
}
@article{NoureddineKraffLaddetal.2019,
  author    = {Noureddine, Yacine and Kraff, Oliver and Ladd, Mark E. and Wrede, Karsten and Chen, Bixia and Quick, Harald H. and Schaefers, Georg and Bitz, Andreas},
  title     = {Radiofrequency induced heating around aneurysm clips using a generic birdcage head coil at 7 Tesla under consideration of the minimum distance to decouple multiple aneurysm clips},
  series = {Magnetic Resonance in Medicine},
  journal   = {Magnetic Resonance in Medicine},
  number    = {Early view},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.27835},
  pages     = {1 -- 17},
  year      = {2019},
  language  = {en}
}
@incollection{Sparla2019,
  author    = {Sparla, Peter},
  title     = {Vermessung},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_2},
  pages     = {13 -- 61},
  year      = {2019},
  language  = {de}
}
@incollection{Ulke2019,
  author    = {Ulke, Bernd},
  title     = {Der baurechtliche Vertrag},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  pages     = {63 -- 87},
  year      = {2019},
  abstract  = {Anhand von kurzen theoretischen Einf{\"u}hrungen werden anhand von Beispielen die wesentlichen Aspekte des baurechtlichen Vertrages erl{\"a}utert. Nach einer Einf{\"u}hrung {\"u}ber das Zustandekommen von (Bau-) Vertr{\"a}gen wird die f{\"u}r Streitf{\"a}lle unerl{\"a}ssliche Dokumentation auf Baustellen erl{\"a}utert. Hierbei werden Hinweise zur Erstellung von Protokollen, zum E-Mail bei Großprojekten und zur Dokumentation von Stundenlohnarbeiten gegeben. Des Weiteren wird eine Schriftverkehrsliste vorgestellt, die zur Nachverfolgung des Schriftverkehrs bei Großprojekten unerl{\"a}sslich ist. Anschließend werden die typischen Vertragsarten vorgestellt, die bei der Abwicklung von Großprojekten zu beachten sind und die Unterschiede werden durch Fallbeispiele erl{\"a}utert. Einen Schwerpunkt des Kapitels bilden auftragsnehmerseitige Verz{\"u}ge sowie mangelbehaftete Leistungen. Hier werden Hinweise gegeben, wie in den entsprechenden Situationen zu reagieren ist.},
  language  = {de}
}
@incollection{Ulke2019,
  author    = {Ulke, Bernd},
  title     = {Baukosten und Finanzierung},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_4},
  pages     = {89 -- 100},
  year      = {2019},
  language  = {de}
}
@incollection{Ulke2019,
  author    = {Ulke, Bernd},
  title     = {Arbeitsvorbereitung und Ablaufplanung},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_6},
  pages     = {117 -- 154},
  year      = {2019},
  language  = {de}
}
@incollection{Ulke2019,
  author    = {Ulke, Bernd},
  title     = {Boden, Baugrube, Verbau},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9 (Online)},
  doi       = {10.1007/978-3-658-23127-9_8},
  pages     = {165 -- 239},
  year      = {2019},
  abstract  = {Im folgenden Kapitel werden die wichtigsten geotechnischen Nachweise sowie praxisnahe Beispiele f{\"u}r den Baubetrieb aufgef{\"u}hrt. Es wird im Wesentlichen auf die Bodenbeschreibung und Klassifikation nach DIN 18196 sowie nach DIN 18300 eingegangen, welche sowohl f{\"u}r die weiteren Berechnungen als auch f{\"u}r die Kalkulation von großer Bedeutung sind. Die aus der Praxis aufgef{\"u}hrten Beispiele verdeutlichen verschiedene Untersuchungs- und Auswertungsmethoden f{\"u}r direkte und indirekte Aufschl{\"u}sse, diese enthalten Labor- und Feldversuche, mit denen man die Verdichtbarkeit von B{\"o}den auswertet und quantifiziert, sowie viele andere Themenbereiche wie Erddruckberechnungen sowie Spannungs- und Setzungsberechnungen. Dar{\"u}ber hinaus werden exemplarisch bestimmte Verbauarten bez{\"u}glich ihrer Bemessung erl{\"a}utert. Es wird ebenfalls auf das Thema Wasserhaltung eingegangen und die erforderlichen Maßnahmen beschrieben, um bestimmte Versagensmechanismen - wie z.B. den hydraulischen Grundbruch - zu verhindern.},
  language  = {de}
}
@incollection{Lemke2019,
  author    = {Lemke, J{\"o}rg},
  title     = {Arbeitssicherheit},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_12},
  pages     = {335 -- 344},
  year      = {2019},
  language  = {de}
}
@article{DantismRoehlenSelmeretal.2019,
  author    = {Dantism, Shahriar and R{\"o}hlen, Desiree and Selmer, Thorsten and Wagner, Torsten and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Quantitative differential monitoring of the metabolic activity of Corynebacterium glutamicum cultures utilizing a light-addressable potentiometric sensor system},
  series = {Biosensors and Bioelectronics},
  volume    = {139},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.bios.2019.111332},
  pages     = {Artikel 111332},
  year      = {2019},
  language  = {en}
}
@inproceedings{SchifferBragard2019,
  author    = {Schiffer, Fabian and Bragard, Michael},
  title     = {Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines},
  series = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  isbn      = {978-1-5386-9257-8},
  doi       = {10.1109/REM.2019.8744101},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{BragardSubeSchneideretal.2019,
  author    = {Bragard, Michael and Sube, Maike and Schneider, Maike and Jungemann, Christoph},
  title     = {Introducing a Cross-University Bachelor's Programme with Orientation Semester - Enabling a Permeable Academic Education System},
  series = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  isbn      = {978-1-5386-9257-8},
  doi       = {10.1109/REM.2019.8744132},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {en}
}
@misc{HojdisMulthauptReckeretal.2019,
  author    = {Hojdis, Nils and Multhaupt, Hendrik and Recker, Carla and Wark, Michael},
  title     = {Schwefelvernetzbare Kautschukmischung, Vulkanisat der Kautschukmischung und Fahrzeugreifen},
  year      = {2019},
  abstract  = {Die Erfindung betrifft eine schwefelvernetzbare Kautschukmischung, deren Vulkanisat und einen Fahrzeugreifen. Die erfindungsgem{\"a}ße Kautschukmischung enth{\"a}lt wenigstens folgende Bestandteile: - Wenigstens einen Dienkautschuk; - wenigstens eine Kohle (HTC-Kohle), die mittels hydrothermaler Karbonisierung von wenigstens einer Ausgangssubstanz hergestellt ist. Der erfindungsgem{\"a}ße Fahrzeugreifen weist in wenigstens einem Bauteil wenigstens ein erfindungsgem{\"a}ßes Vulkanisat der Kautschukmischung auf.},
  language  = {de}
}
@misc{DauerHojdisMuelleretal.2019,
  author    = {Dauer, David-Raphael and Hojdis, Nils and M{\"u}ller, Norbert and Recker, Carla and Schax, Fabian and Sch{\"o}ffel, Julia and Tarantola, Gesa and Weber, Christine},
  title     = {Schwefelvernetzbare Kautschukmischung, Vulkanisat der Kautschukmischung und Fahrzeugreifen},
  year      = {2019},
  abstract  = {Die Erfindung betrifft eine schwefelvernetzbare Kautschukmischung, deren Vulkanisat und einen Fahrzeugreifen. Die schwefelvernetzbare Kautschukmischung enth{\"a}lt wenigstens die folgenden Bestandteile: - wenigstens einen Dienkautschuk; und - 10 bis 300 phr wenigstens einer Kiesels{\"a}ure; und - 1 bis 30 phf wenigstens eines Silans A mit der allgemeinen Summenformel A-I) A-I)(R1)oSi-R2-(S-R3)q-S-X; und - 0,5 bis 30 phf wenigstens eines Silans B mit der allgemeinen Summenformel B-I) B-I) (R1)oSi-R2-(S-R3)u-S-R2-Si(R1)o wobei q =1, 2 oder 3 ist; und u = 1, 2 oder 3 ist; und X ein Wasserstoffatom oder eine -C(=O)-R8 Gruppe ist wobei R8 ausgew{\"a}hlt ist aus Wasserstoff, C1-C20 Alkylgruppen, vorzugsweise C1-C17, C6-C20- Arylgruppen, vorzugsweise Phenyl, C2-C20-Alkenylgruppen und C7-C20-Aralkylgruppen.},
  language  = {de}
}
@article{WeberEnglhardArentetal.2019,
  author    = {Weber, Tobias and Englhard, Markus and Arent, Jan-Christoph and Hausmann, Joachim},
  title     = {An experimental characterization of wrinkling generated during prepreg autoclave manufacturing using caul plates},
  series = {Journal of Composite Materials},
  volume    = {53},
  journal   = {Journal of Composite Materials},
  number    = {26-27},
  issn      = {1530-793X},
  doi       = {10.1177/0021998319846556},
  pages     = {3757 -- 3773},
  year      = {2019},
  language  = {en}
}
@phdthesis{Weber2019,
  author    = {Weber, Tobias},
  title     = {Herstellprozesssimulation zur Vorhersage der Faltenbildung in der Prepreg-Autoklav-Fertigung},
  publisher = {Technische Universit{\"a}t Kaiserslautern},
  address   = {Kaiserslautern},
  isbn      = {978-3-944440-24-8},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:386-kluedo-54923},
  pages     = {XIV, 207 Seiten},
  year      = {2019},
  language  = {de}
}
@inproceedings{HailerWeberArent2019,
  author    = {Hailer, Benjamin and Weber, Tobias and Arent, Jan-Christoph},
  title     = {Manufacturing Process Simulation for Autoclave-Produced Sandwich Structures},
  series = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  booktitle = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{WeberEnglhardHaileretal.2019,
  author    = {Weber, Tobias and Englhard, Markus and Hailer, Benjamin and Arent, Jan-Christoph},
  title     = {Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling},
  series = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  booktitle = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  pages     = {1 -- 10},
  year      = {2019},
  language  = {en}
}
@article{SchiedermeierRettnerHeilmannetal.2019,
  author    = {Schiedermeier, Maximilian and Rettner, Cornelius and Heilmann, Marcel and Schneider, Felix and Marz, Martin},
  title     = {Interference of automotive HV-DC-systems by traction voltage-source-inverters (VSI)},
  series = {2019 IEEE Transportation Electrification Conference (ITEC-India)},
  journal   = {2019 IEEE Transportation Electrification Conference (ITEC-India)},
  publisher = {IEEE},
  address   = {New York},
  doi       = {10.1109/ITEC-India48457.2019.ITECINDIA2019-37},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {en}
}
@article{GronsfeldJoachimMalecha2019,
  author    = {Gronsfeld, Richard and Joachim, Klubert and Malecha, Hartmut},
  title     = {3-D-Visualisierung von vorhandenen Staubauwerken zur holistischen Planung und {\"U}berwachung},
  series = {Wasserwirtschaft},
  volume    = {109},
  journal   = {Wasserwirtschaft},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2192-8762},
  doi       = {10.1007/s35147-019-0075-x},
  pages     = {82 -- 85},
  year      = {2019},
  language  = {de}
}
@misc{Hojdis2019,
  author    = {Hojdis, Nils},
  title     = {Verfahren zum Bestimmen einer Sitzeinstellung eines Sitzes eines Kraftfahrzeugs, Computerprogrammprodukt, Servereinrichtung, Kommunikationsendger{\"a}t und Kraftfahrzeug},
  year      = {2019},
  abstract  = {Die Erfindung betrifft ein Verfahren zum Bestimmen einer Sitzeinstellung (23) eines Sitzes (3) eines Kraftfahrzeugs (1), bei welchem folgende Schritte durchgef{\"u}hrt werden:- Bereitstellen einer K{\"o}rperabmessung (12) eines Nutzers (6) des Kraftfahrzeugs (1);- Bereitstellen einer Sitzeigenschaft (13) des Sitzes (3) des Kraftfahrzeugs (1);- Bereitstellen eines mit zumindest einer Referenzsitzeigenschaft (20), zumindest einer Referenzk{\"o}rperabmessung (21) und zumindest einer Referenzsitzeinstellung (22) trainiertes k{\"u}nstliches neuronales Netz (14); und- Bestimmen der Sitzeinstellung (23) durch Eingabe der K{\"o}rperabmessung (12) und der Sitzeigenschaft (13) in das k{\"u}nstliche neuronale Netz (14).},
  language  = {de}
}
@misc{DauerHojdisMuelleretal.2019,
  author    = {Dauer, David-Raphael and Hojdis, Nils and M{\"u}ller, Norbert and Recker, Carla and Schax, Fabian and Sch{\"o}ffel, Julia and Tarantola, Gesa and Weber, Christine},
  title     = {Schwefelvernetzbare Kautschukmischung, Vulkanisat der Kautschukmischung und Fahrzeugreifen},
  year      = {2019},
  abstract  = {Die Erfindung betrifft eine schwefelvernetzbare Kautschukmischung, deren Vulkanisat und einen Fahrzeugreifen.Die schwefelvernetzbare Kautschukmischung enth{\"a}lt wenigstens die folgenden Bestandteile:- wenigstens einen Dienkautschuk; und- 10 bis 300 phr wenigstens einer Kiesels{\"a}ure ; und- 1 bis 30 phf wenigstens eines Silans A mit der allgemeinen Summenformel A-I)und- 0,5 bis 30 phf wenigstens eines Silans B mit der allgemeinen Summenformel B-I)wobei u gleich 0, 1, 2 oder 3 und v gleich 0 oder 1 ist.},
  language  = {de}
}
@article{KunkelGebhardtMpofuetal.2019,
  author    = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbulani and Kallweit, Stephan},
  title     = {Quality assurance in metal powder bed fusion via deep-learning-based image classification},
  series = {Rapid Prototyping Journal},
  volume    = {26},
  journal   = {Rapid Prototyping Journal},
  number    = {2},
  issn      = {1355-2546},
  doi       = {10.1108/RPJ-03-2019-0066},
  pages     = {259 -- 266},
  year      = {2019},
  language  = {en}
}
@inproceedings{BedburThullMoorkampetal.2019,
  author    = {Bedbur, Christian and Thull, J. and Moorkamp, Wilfried and Uibel, Thomas},
  title     = {Standardbr{\"u}cken f{\"u}r Geh- und Radwege},
  series = {Tagungsband 4. Aachener Holzbautagung 2019: 12. und 13. September an der FH Aachen},
  booktitle = {Tagungsband 4. Aachener Holzbautagung 2019: 12. und 13. September an der FH Aachen},
  publisher = {FH Aachen},
  address   = {Aachen},
  issn      = {2197-4489},
  pages     = {34 -- 45},
  year      = {2019},
  language  = {de}
}
@incollection{LeiseAltherrSimonetal.2019,
  author    = {Leise, Philipp and Altherr, Lena and Simon, Nicolai and Pelz, Peter F.},
  title     = {Finding global-optimal gearbox designs for battery electric vehicles},
  series = {Optimization of complex systems - theory, models, algorithms and applications : WCGO 2019},
  booktitle = {Optimization of complex systems - theory, models, algorithms and applications : WCGO 2019},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-21802-7},
  doi       = {10.1007/978-3-030-21803-4_91},
  pages     = {916 -- 925},
  year      = {2019},
  abstract  = {In order to maximize the possible travel distance of battery electric vehicles with one battery charge, it is mandatory to adjust all components of the powertrain carefully to each other. While current vehicle designs mostly simplify the powertrain rigorously and use an electric motor in combination with a gearbox with only one fixed transmission ratio, the use of multi-gear systems has great potential. First, a multi-speed system is able to improve the overall energy efficiency. Secondly, it is able to reduce the maximum momentum and therefore to reduce the maximum current provided by the traction battery, which results in a longer battery lifetime. In this paper, we present a systematic way to generate multi-gear gearbox designs that—combined with a certain electric motor—lead to the most efficient fulfillment of predefined load scenarios and are at the same time robust to uncertainties in the load. Therefore, we model the electric motor and the gearbox within a Mixed-Integer Nonlinear Program, and optimize the efficiency of the mechanical parts of the powertrain. By combining this mathematical optimization program with an unsupervised machine learning algorithm, we are able to derive global-optimal gearbox designs for practically relevant momentum and speed requirements.},
  language  = {en}
}
@incollection{StengerAltherrAbel2019,
  author    = {Stenger, David and Altherr, Lena and Abel, Dirk},
  title     = {Machine learning and metaheuristics for black-box optimization of product families: a case-study investigating solution quality vs. computational overhead},
  series = {Operations Research Proceedings 2018},
  booktitle = {Operations Research Proceedings 2018},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-18499-5 (Print)},
  doi       = {10.1007/978-3-030-18500-8_47},
  pages     = {379 -- 385},
  year      = {2019},
  abstract  = {In product development, numerous design decisions have to be made. Multi-domain virtual prototyping provides a variety of tools to assess technical feasibility of design options, however often requires substantial computational effort for just a single evaluation. A special challenge is therefore the optimal design of product families, which consist of a group of products derived from a common platform. Finding an optimal platform configuration (stating what is shared and what is individually designed for each product) and an optimal design of all products simultaneously leads to a mixed-integer nonlinear black-box optimization model. We present an optimization approach based on metamodels and a metaheuristic. To increase computational efficiency and solution quality, we compare different types of Gaussian process regression metamodels adapted from the domain of machine learning, and combine them with a genetic algorithm. We illustrate our approach on the example of a product family of electrical drives, and investigate the trade-off between solution quality and computational overhead.},
  language  = {en}
}
@article{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Arbeitsrechtliche Akzente der Gesetzgebung und Rechtsprechung in 2018 : Ein kurzweiliger R{\"u}ckblick auf das Arbeitsrecht des vergangenen Jahres},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {5},
  issn      = {0028-3460},
  pages     = {266 -- 279},
  year      = {2019},
  language  = {de}
}
@article{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Auslandsentsendungen im arbeitsrechtlichen Zusammenhang : Ausgestaltung eines Entsendungsvertrags und mitbestimmungsrechtliche Aspekte},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {19},
  issn      = {0028-3460},
  pages     = {1400 -- 1406},
  year      = {2019},
  language  = {de}
}
@article{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Rechtssichere Vereinbarungen von K{\"u}ndigungsfristen im Arbeitsvertrag : Weitestgehende Abdingbarkeit gesetzlicher Vorgaben erm{\"o}glicht passgenaue Gestaltungen},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {23},
  issn      = {0028-3460},
  pages     = {1693 -- 1699},
  year      = {2019},
  language  = {de}
}
@article{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Die Optionen des Arbeitgebers nach Krankmeldung des Arbeitnehmers : Ein {\"U}berblick {\"u}ber die Rechte und Pflichten des Arbeitgebers bei Arbeitsunf{\"a}higkeit des Mitarbeiters},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {30},
  issn      = {0028-3460},
  pages     = {2222 -- 2229},
  year      = {2019},
  language  = {de}
}
@article{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Die arbeitsvertragliche Vereinbarung von Vertragsstrafen : Anforderungen an wirksame Vertragsstrafenabreden in Formulararbeitsvertr{\"a}gen beachten},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {45},
  issn      = {0028-3460},
  pages     = {3302 -- 3308},
  year      = {2019},
  language  = {de}
}
@misc{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Sozialversicherungspflicht eines Minderheitsgesellschafter-Gesch{\"a}ftsf{\"u}hrers einer Familiengesellschaft},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  number    = {3},
  issn      = {1868-1816},
  pages     = {48 -- 48},
  year      = {2019},
  language  = {de}
}
@misc{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Kein Anspruch des Arbeitnehmers auf Verzugspauschale bei Lohnverzug des Arbeitgebers},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  number    = {4},
  issn      = {1868-1816},
  pages     = {75 -- 75},
  year      = {2019},
  language  = {de}
}
@misc{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Kirchenmitgliedschaft als Einstellungskriterium},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  number    = {6},
  issn      = {1868-1816},
  pages     = {111 -- 111},
  year      = {2019},
  language  = {de}
}
@misc{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Zuordnung von befristet versetzten Arbeitnehmern zu einem {\"u}bergehenden Betriebsteil},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  number    = {7},
  issn      = {1868-1816},
  pages     = {132 -- 132},
  year      = {2019},
  language  = {de}
}
@misc{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Keine sachgrundlose Befristung bei acht Jahre zur{\"u}ckliegender Vorbesch{\"a}ftigung},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  number    = {11},
  issn      = {1868-1816},
  pages     = {201 -- 201},
  year      = {2019},
  language  = {de}
}
@misc{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Vorlagebeschluss - Kopftuchverbot erneut vor dem EuGH},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  number    = {11},
  issn      = {1868-1816},
  pages     = {203 -- 203},
  year      = {2019},
  language  = {de}
}
@article{Huening2019,
  author    = {H{\"u}ning, Felix},
  title     = {Nachr{\"u}stm{\"o}glichkeiten von Dieselfahrzeugen aus technischer Sicht},
  series = {Zeitschrift f{\"u}r Verkehrsrecht : NZV},
  journal   = {Zeitschrift f{\"u}r Verkehrsrecht : NZV},
  number    = {1},
  publisher = {C.H.Beck},
  pages     = {27 -- 32},
  year      = {2019},
  language  = {de}
}
@incollection{Timme2019,
  author    = {Timme, Michael},
  title     = {Kommentierung zu \S\S 705 - 740},
  series = {Handbuch der Beweislast - Band 2, \S\S 1 - 811 BGB / Baumg{\"a}rtel, Gottfried ; Laumen, Hans-Willi ; Pr{\"u}tting, Hanns (Hrsg.). 4., v{\"o}llig {\"u}berarbeitete und aktualisierte Auflage},
  booktitle = {Handbuch der Beweislast - Band 2, \S\S 1 - 811 BGB / Baumg{\"a}rtel, Gottfried ; Laumen, Hans-Willi ; Pr{\"u}tting, Hanns (Hrsg.). 4., v{\"o}llig {\"u}berarbeitete und aktualisierte Auflage},
  publisher = {Carl Heymanns},
  address   = {K{\"o}ln},
  isbn      = {978-3-452-29003-8},
  pages     = {1637 -- 1664},
  year      = {2019},
  language  = {de}
}
@article{KetelhutKolditzGoelletal.2019,
  author    = {Ketelhut, Maike and Kolditz, Melanie and G{\"o}ll, Fabian and Braunstein, Bjoern and Albracht, Kirsten and Abel, Dirk},
  title     = {Admittance control of an industrial robot during resistance training},
  series = {IFAC-PapersOnLine},
  volume    = {52},
  journal   = {IFAC-PapersOnLine},
  number    = {19},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2405-8963},
  doi       = {10.1016/j.ifacol.2019.12.102},
  pages     = {223 -- 228},
  year      = {2019},
  abstract  = {Neuromuscular strength training of the leg extensor muscles plays an important role in the rehabilitation and prevention of age and wealth related diseases. In this paper, we focus on the design and implementation of a Cartesian admittance control scheme for isotonic training, i.e. leg extension and flexion against a predefined weight. For preliminary testing and validation of the designed algorithm an experimental research and development platform consisting of an industrial robot and a force plate mounted at its end-effector has been used. Linear, diagonal and arbitrary two-dimensional motion trajectories with different weights for the leg extension and flexion part are applied. The proposed algorithm is easily adaptable to trajectories consisting of arbitrary six-dimensional poses and allows the implementation of individualized trajectories.},
  language  = {en}
}
@inproceedings{KetelhutGoellBraunsteinetal.2019,
  author    = {Ketelhut, Maike and G{\"o}ll, Fabian and Braunstein, Bjoern and Albracht, Kirsten and Abel, Dirk},
  title     = {Iterative learning control of an industrial robot for neuromuscular training},
  series = {2019 IEEE Conference on Control Technology and Applications},
  booktitle = {2019 IEEE Conference on Control Technology and Applications},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-7281-2767-5 (ePub)},
  doi       = {10.1109/CCTA.2019.8920659},
  pages     = {7 Seiten},
  year      = {2019},
  abstract  = {Effective training requires high muscle forces potentially leading to training-induced injuries. Thus, continuous monitoring and controlling of the loadings applied to the musculoskeletal system along the motion trajectory is required. In this paper, a norm-optimal iterative learning control algorithm for the robot-assisted training is developed. The algorithm aims at minimizing the external knee joint moment, which is commonly used to quantify the loading of the medial compartment. To estimate the external knee joint moment, a musculoskeletal lower extremity model is implemented in OpenSim and coupled with a model of an industrial robot and a force plate mounted at its end-effector. The algorithm is tested in simulation for patients with varus, normal and valgus alignment of the knee. The results show that the algorithm is able to minimize the external knee joint moment in all three cases and converges after less than seven iterations.},
  language  = {en}
}
@misc{BlottnerHastermannMuckeltetal.2019,
  author    = {Blottner, Dieter and Hastermann, Maria and Muckelt, Paul and Albracht, Kirsten and Schoenrock, Britt and Salanova, Michele and Warner, Martin and Gunga, Hans-Christian and Stokes, Maria},
  title     = {MYOTONES - Inflight muscle health status monitoring during long-duration space missions onboard the International Space Station: a single case study},
  series = {IAC Papers Archive},
  journal   = {IAC Papers Archive},
  publisher = {Pergamon},
  address   = {Oxford},
  issn      = {00741795},
  pages     = {2 Seiten},
  year      = {2019},
  abstract  = {The MYOTONES experiment is the first to monitor changes in the basic biomechanical properties (tone, elasticity and stiffness) of the resting human myofascial system due to microgravity with a oninvasive, portable device on board the ISS. The MyotonPRO device applies several brief mechanical stimuli to the surface of the skin, and the natural oscillation signals of the tissue beneath are detected and computed by the MyotonPRO. Thus, an objective, quick and easy determination of the state of the underlying tissue is possible. Two preflight, four inflight and four post flight measurements were performed on a male astronaut using the same 10 measurement points (MP) for each session. MPs were located on the plantar fascia, Achilles tendon, M. soleus, M. gastrocnemius, M. multifidus, M. splenius capitis, M. deltoideus anterior, M. rectus femoris, infrapatellar tendon, M. tibialis anterior. Subcutaneous tissues thickness above the MPs was measured using ultrasound imaging. Magnetic resonance images (MRI) of lower limb muscles and functional tests were also performed pre- and postflight. Our first measurements on board the ISS confirmed increased tone and stiffness of the lumbar multifidus muscle, an important trunk stabilizer, dysfunction of which is known to be associated with back pain. Furthermore, reduced tone and stiffness of Achilles tendon and plantar fascia were observed inflight vs. preflight, confirming previous findings from terrestrial analog studies and parabolic flights. Unexpectedly, the deltoid showed negative inflight changes in tone and stiffness, and increased elasticity, suggesting a potential risk of muscle atrophy in longer spaceflight that should be addressed by adequate inflight countermeasure protocols. Most values from limb and back MPS showed deflected patterns (in either directions) from inflight shortly after the re-entry phase on the landing day and one week later. Most parameter values then normalized to baseline after 3 weeks likely due to 1G re-adaptation and possible outcome of the reconditioning protocol. No major changes in subcutaneous tissues thickness above the MPs were found inflight vs preflight, suggesting no bias (i.e., fluid shift, extreme tissue thickening or loss). Pre- and postflight MRI and functional tests showed negligible changes in calf muscle size, power and force, which is likely due to training effects from current inflight exercise protocols. The MYOTONES experiment is currently ongoing to collect data from further crew members. The potential impact of this research is to better understand the effects of microgravity and countermeasures over the time course of an ISS mission cycle. This will enable exercise countermeasures to be tailored},
  language  = {en}
}
@article{WerkhausenCroninAlbrachtetal.2019,
  author    = {Werkhausen, Amelie and Cronin, Neil J. and Albracht, Kirsten and Paulsen, G{\o}ran and Larsen, Askild V. and Bojsen-M{\o}ller, Jens and Seynnes, Olivier R.},
  title     = {Training-induced increase in Achilles tendon stiffness affects tendon strain pattern during running},
  series = {PeerJ},
  journal   = {PeerJ},
  publisher = {Peer},
  address   = {London},
  issn      = {21678359},
  doi       = {10.7717/peerj.6764},
  pages     = {18 Seiten},
  year      = {2019},
  abstract  = {Background During the stance phase of running, the elasticity of the Achilles tendon enables the utilisation of elastic energy and allows beneficial contractile conditions for the triceps surae muscles. However, the effect of changes in tendon mechanical properties induced by chronic loading is still poorly understood. We tested the hypothesis that a training-induced increase in Achilles tendon stiffness would result in reduced tendon strain during the stance phase of running, which would reduce fascicle strains in the triceps surae muscles, particularly in the mono-articular soleus. Methods Eleven subjects were assigned to a training group performing isometric singleleg plantarflexion contractions three times per week for ten weeks, and another ten subjects formed a control group. Before and after the training period, Achilles tendon stiffness was estimated, and muscle-tendon mechanics were assessed during running at preferred speed using ultrasonography, kinematics and kinetics. Results Achilles tendon stiffness increased by 18\% (P <0:01) in the training group, but the associated reduction in strain seen during isometric contractions was not statistically significant. Tendon elongation during the stance phase of running was similar after training, but tendon recoil was reduced by 30\% (P <0:01), while estimated tendon force remained unchanged. Neither gastrocnemius medialis nor soleus fascicle shortening during stance was affected by training. Discussion These results show that a training-induced increase in Achilles tendon stiffness altered tendon behaviour during running. Despite training-induced changes in tendon mechanical properties and recoil behaviour, the data suggest that fascicle shortening patterns were preserved for the running speed that we examined. The asymmetrical changes in tendon strain patterns supports the notion that simple inseries models do not fully explain the mechanical output of the muscle-tendon unit during a complex task like running.},
  language  = {en}
}
@book{UibelPeterson2019,
  author    = {Uibel, Thomas and Peterson, Leif Arne},
  title     = {Tagungsband Aachener Holzbautagung 2019},
  editor    = {Uibel, Thomas and Peterson, Leif Arne},
  publisher = {FH Aachen},
  address   = {Aachen},
  issn      = {2197-4489},
  pages     = {140 Seiten ; Illustrationen, graph. Darst.},
  year      = {2019},
  language  = {de}
}
@inproceedings{BergmannGraebenerWildetal.2019,
  author    = {Bergmann, Kevin and Gr{\"a}bener, Josefine and Wild, Dominik and Ulfers, H. and Czupalla, Markus},
  title     = {Study on thermal stabilization of a GEO-stationary telescope baffling system by integral application of phase change material},
  series = {International Conference on Environmental Systems},
  booktitle = {International Conference on Environmental Systems},
  pages     = {1 -- 14},
  year      = {2019},
  abstract  = {The utilization of phase change material (PCM) for latent heat storage and thermal control of spacecraft has been demonstrated in the past in few missions only. One limiting factor was the fact that all concepts developed so far envisioned the PCM to be applied as an additional capacitor, encapsulated in its own housing, leading to mass, efficiency and accommodation challenges. Recently, the application of PCM within the scan cavity of a GEOS type satellite has been suggested, in order to tackle thermal issues due to direct sun intrusion (Choi, M., 2014). However, the application of PCM in such complex mechanical structures is extremely challenging. A new concept to tackle this issue is currently under development at the FH Aachen University of Applied Sciences. The concept "Infused Thermal Solutions (ITS)" is based on the idea to 3D print metallic structures in their regular functional shape, but double walled with internal lattice support structures, allowing the infusion of a PCM layer directly into the voids and eliminating the need for additional parts and interfaces. Together with OHB System, FH Aachen theoretically studied the application of this technology to the Meteosat Third Generation (MTG) Infra-Red Sounder (IRS) instrument. The study focuses on the scan cavity and entrance baffling assembly (EBA) of the IRS. It consists of thermal analyses, 3D-redesign and bread boarding of a scaled and PCM infused EBA version. In the thermal design of the alternative EBA, PCM was applied directly into the EBA, simulating the worst hot case sun intrusion of the mission. By applying 4kg of PCM (to a 60kg baffle) the EBA temperature excursions during sun intrusion were limited from 140K to 30K, leading to a significant thermo-opto-elastic performance gain. This paper introduces the ITS concept development status.},
  language  = {en}
}
@misc{ReiswichBrandtCzupalla2019,
  author    = {Reiswich, Martin and Brandt, Hannes and Czupalla, Markus},
  title     = {Passive thermal control by integration of phase change material into additively manufactured structures},
  series = {E2. 47th Student conference},
  journal   = {E2. 47th Student conference},
  year      = {2019},
  abstract  = {Optical Instruments require an extremely stable thermal surrounding to prevent loss of data quality by misalignments of the instrument components resulting from material deformation due to temperature f luctuations (e.g. from solar intrusion). Phase Change Material (PCM) can be applied as a thermal damper to achieve a more uniform temperature distribution. The challenge of this method is, among others, the integration of PCM into affected areas. If correctly designed, incoming heat is latently absorbed during phase change of the PCM, i.e. the temperature of a structure remains almost constant. In a cold phase, the heat during phase change is released again latently until the PCM returns to its original state of aggregation. Thus, the structure is thermally stabilized. At FH Aachen- University of Applied Sciences research is conducted to apply PCM directly into the structures of affected components (baffles, optical benches, electronic boxes, etc.). Through the application of Additive Manufacturing, the necessary voids are directly printed into these structures and filled later with PCM. Additive Manufacturing enables complex structures that would not have been possible with conservative manufacturing methods. A corresponding Breadboard was developed and manufactured by Selective Laser Melting (SLM). The current state of research includes the handling and analysis of the Breadboard, tests and a correlation of the thermal model. The results have shown analytically and practically that it is possible to use PCM as an integral part of the structure as a thermal damper. The results serve as a basis for the further development of the technology, which should maximize performance and enable the integration of PCM into much more complex structures.},
  language  = {en}
}
@misc{BiewendtBlaschkeBoehnert2019,
  author    = {Biewendt, Marcel and Blaschke, Florian and B{\"o}hnert, Arno},
  title     = {The rebound effect: a critical and systematic review on the current state of affairs},
  series = {Abstracts of the International Conference on Sustainable Economy and Agriculture},
  journal   = {Abstracts of the International Conference on Sustainable Economy and Agriculture},
  editor    = {Koponicsne Gy{\"o}rke, Diana},
  publisher = {Universit{\"a}t Kaposv{\´a}r},
  address   = {Kaposv{\´a}r},
  isbn      = {978-615-5599-72-9},
  pages     = {101 -- 101},
  year      = {2019},
  language  = {en}
}
@article{BaringhausGaigall2019,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {On an asymptotic relative efficiency concept based on expected volumes of confidence regions},
  series = {Statistics - A Journal of Theoretical and Applied Statistic},
  volume    = {53},
  journal   = {Statistics - A Journal of Theoretical and Applied Statistic},
  number    = {6},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1029-4910},
  doi       = {10.1080/02331888.2019.1683560},
  pages     = {1396 -- 1436},
  year      = {2019},
  abstract  = {The paper deals with an asymptotic relative efficiency concept for confidence regions of multidimensional parameters that is based on the expected volumes of the confidence regions. Under standard conditions the asymptotic relative efficiencies of confidence regions are seen to be certain powers of the ratio of the limits of the expected volumes. These limits are explicitly derived for confidence regions associated with certain plugin estimators, likelihood ratio tests and Wald tests. Under regularity conditions, the asymptotic relative efficiency of each of these procedures with respect to each one of its competitors is equal to 1. The results are applied to multivariate normal distributions and multinomial distributions in a fairly general setting.},
  language  = {en}
}
@article{Gaigall2019,
  author    = {Gaigall, Daniel},
  title     = {On a new approach to the multi-sample goodness-of-fit problem},
  series = {Communications in Statistics - Simulation and Computation},
  volume    = {53},
  journal   = {Communications in Statistics - Simulation and Computation},
  number    = {10},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1532-4141},
  doi       = {10.1080/03610918.2019.1618472},
  pages     = {2971 -- 2989},
  year      = {2019},
  abstract  = {Suppose we have k samples X₁,₁,…,X₁,ₙ₁,…,Xₖ,₁,…,Xₖ,ₙₖ with different sample sizes ₙ₁,…,ₙₖ and unknown underlying distribution functions F₁,…,Fₖ as observations plus k families of distribution functions {G₁(⋅,ϑ);ϑ∈Θ},…,{Gₖ(⋅,ϑ);ϑ∈Θ}, each indexed by elements ϑ from the same parameter set Θ, we consider the new goodness-of-fit problem whether or not (F₁,…,Fₖ) belongs to the parametric family {(G₁(⋅,ϑ),…,Gₖ(⋅,ϑ));ϑ∈Θ}. New test statistics are presented and a parametric bootstrap procedure for the approximation of the unknown null distributions is discussed. Under regularity assumptions, it is proved that the approximation works asymptotically, and the limiting distributions of the test statistics in the null hypothesis case are determined. Simulation studies investigate the quality of the new approach for small and moderate sample sizes. Applications to real-data sets illustrate how the idea can be used for verifying model assumptions.},
  language  = {en}
}
@article{JanThimoBauerBieleetal.2019,
  author    = {Jan Thimo, Grundmann and Bauer, Waldemar and Biele, Jens and Boden, Ralf and Ceriotti, Matteo and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Hercik, David},
  title     = {Capabilities of Gossamer-1 derived small spacecraft solar sails carrying Mascot-derived nanolanders for in-situ surveying of NEAs},
  series = {Acta Astronautica},
  volume    = {156},
  journal   = {Acta Astronautica},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0094-5765},
  doi       = {10.1016/j.actaastro.2018.03.019},
  pages     = {330 -- 362},
  year      = {2019},
  language  = {en}
}
@incollection{Eggert2019,
  author    = {Eggert, Mathias},
  title     = {Big Data Research - How to Structure the Changes of the Past Decade?},
  series = {The Art of Structuring},
  booktitle = {The Art of Structuring},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-06234-7},
  doi       = {10.1007/978-3-030-06234-7_26},
  pages     = {271 -- 281},
  year      = {2019},
  abstract  = {In the past decade, many IS researchers focused on researching the phenomenon of Big Data. At the same time, the relevance of data protection gets more attention than ever before. In particular, since the enactment of the European General Data Protection Regulation in May 2018 Information Systems research should provide answers for protecting personal data. The article at hand presents a structuring framework for Big Data research outcome and the consideration of data protection. IS Researchers might use the framework in order to structure Big Data literature and to identify research gaps that should be addressed in the future.},
  language  = {en}
}
@article{RossiParisiCasarietal.2019,
  author    = {Rossi, Leonardo and Parisi, Davide and Casari, Chiara and Montanari, Luca and Ruggieri, Gabriella and Holtschoppen, Britta and Butenweg, Christoph},
  title     = {Empirical Data about Direct Economic Consequences of Emilia-Romagna 2012 Earthquake on Long-Span-Beam Buildings},
  series = {Earthquake Spectra},
  volume    = {35},
  journal   = {Earthquake Spectra},
  number    = {4},
  issn      = {1944-8201},
  doi       = {10.1193/100118EQS224DP},
  pages     = {1979 -- 2001},
  year      = {2019},
  language  = {en}
}
@article{RossiHoltschoppenButenweg2019,
  author    = {Rossi, Leonardo and Holtschoppen, Britta and Butenweg, Christoph},
  title     = {Official data on the economic consequences of the 2012 Emilia-Romagna earthquake: a first analysis of database SFINGE},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  number    = {9},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007\%2Fs10518-019-00655-8},
  pages     = {4855 -- 4884},
  year      = {2019},
  language  = {en}
}
@inproceedings{GrundmannBauerBodenetal.2019,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Boden, Ralf Christian and Ceriotti, Matteo and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Hercik, D. and Herique, A. and Ho, Tra-Mi and Jahnke, Rico and Kofman, Wlodek and Lange, Caroline and Lichtenheldt, Roy and McInnes, Colin R. and Mikschl, Tobias and Montenegro, Sergio and Moore, Iain and Pelivan, Ivanka and Peloni, Alessandro and Plettenmeier, Dirk and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Rogez, Yves and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and Toth, Norbert and Viavattene, Giulia and Wejmo, Elisabet and Wolff, Friederike and Ziach, Christian},
  title     = {Responsive exploration and asteroid characterization through integrated solar sail and lander development using small spacecraft technologies},
  series = {IAA Planetary Defense Conference},
  booktitle = {IAA Planetary Defense Conference},
  year      = {2019},
  abstract  = {In parallel to the evolution of the Planetary Defense Conference, the exploration of small solar system bodies has advanced from fast fly-bys on the sidelines of missions to the planets to the implementation of dedicated sample-return and in-situ analysis missions. Spacecraft of all sizes have landed, touch-and-go sampled, been gently beached, or impacted at hypervelocity on asteroid and comet surfaces. More have flown by close enough to image their surfaces in detail or sample their immediate environment, often as part of an extended or re-purposed mission. And finally, full-scale planetary defense experiment missions are in the making. Highly efficient low-thrust propulsion is increasingly applied beyond commercial use also in mainstream and flagship science missions, in combination with gravity assist propulsion. Another development in the same years is the growth of small spacecraft solutions, not in size but in numbers and individual capabilities. The on-going NASA OSIRIS-REx and JAXA HAYABUSA2 missions exemplify the trend as well as the upcoming NEA SCOUT mission or the landers MINERVA-II and MASCOT recently deployed on Ryugu. We outline likely as well as possible and efficient routes of continuation of all these developments towards a propellant-less and highly efficient class of spacecraft for small solar system body exploration: small spacecraft solar sails designed for carefree handling and equipped with carried landers and application modules, for all asteroid user communities -planetary science, planetary defence, and in-situ resource utilization. This projection builds on the experience gained in the development of deployable membrane structures leading up to the successful ground deployment test of a (20 m)² solar sail at DLR Cologne and in the 20 years since. It draws on the background of extensive trajectory optimization studies, the qualified technology of the DLR GOSSAMER-1 deployment demonstrator, and the MASCOT asteroid lander. These enable 'now-term' as well as near-term hardware solutions, and thus responsive fast-paced development. Mission types directly applicable to planetary defense include: single and Multiple NEA Rendezvous ((M)NR) for mitigation precursor, target monitoring and deflection follow-up tasks; sail-propelled head-on retrograde kinetic impactors (RKI) for mitigation; and deployable membrane based methods to modify the asteroid's properties or interact with it. The DLR-ESTEC GOSSAMER Roadmap initiated studies of missions uniquely feasible with solar sails such as Displaced L1 (DL1) space weather advance warning and monitoring and Solar Polar Orbiter (SPO) delivery which demonstrate the capability of near-term solar sails to achieve NEA rendezvous in any kind of orbit, from Earth-coorbital to extremely inclined and even retrograde orbits. For those mission types using separable payloads, such as SPO, (M)NR and RKI, design concepts can be derived from the separable Boom Sail Deployment Units characteristic of DLR GOSSAMER solar sail technology, nanolanders like MASCOT, or microlanders like the JAXA-DLR Jupiter Trojan Asteroid Lander for the OKEANOS mission which can shuttle from the sail to the asteroids visited and enable multiple NEA sample-return missions. These are an ideal match for solar sails in micro-spacecraft format whose launch configurations are compatible with ESPA and ASAP secondary payload platforms.},
  language  = {en}
}
@inproceedings{BertschMeineckeWolfetal.2019,
  author    = {Bertsch, Timo and Meinecke, Matthias and Wolf, Martin R. and Schmunk, Karina},
  title     = {Smart-Living-Services nur gegen Daten? Process-Mining als M{\"o}glichkeit zur Steigerung der Akzeptanz!},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  pages     = {216 -- 226},
  year      = {2019},
  abstract  = {Seit Jahren etablieren sich Technologien in unserem Alltag, die mit Hilfe von smarten Komponenten neue Services und Vernetzungsm{\"o}glichkeiten schaffen. Dieses Paper beschreibt die Ergebnisse einer Studie, die die Akzeptanz von IoT-gest{\"u}tzten, smarten Services im privaten Umfeld untersucht. Dabei wird eine zentrale Datenverarbeitung mit automatisierter Erstellung smarter Services der dezentralen Datenverarbeitung mit manueller Serviceerstellung in sieben Kategorien gegen{\"u}bergestellt. Die Auswertung der Studie legt die Forschungsfrage nahe, ob das Nutzerverhalten im Kontext Smart Living nicht auch mit einem dezentralen L{\"o}sungsansatz, und somit unabh{\"a}ngig von großen Unternehmen, analysiert werden kann. Hierf{\"u}r wird im zweiten Teil des Papers die Anwendbarkeit von Process-Mining im Bereich Smart Living untersucht und prototypisch getestet.},
  language  = {de}
}
@incollection{ButenwegHoltschoppen2019,
  author    = {Butenweg, Christoph and Holtschoppen, Britta},
  title     = {Seismic design of structures and components in industrial units},
  series = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-57550-5},
  doi       = {10.1007/978-3-662-57550-5_5},
  pages     = {359 -- 481},
  year      = {2019},
  abstract  = {Industrial units consist of the primary load-carrying structure and various process engineering components, the latter being by far the most important in financial terms. In addition, supply structures such as free-standing tanks and silos are usually required for each plant to ensure the supply of material and product storage. Thus, for the earthquake-proof design of industrial plants, design and construction rules are required for the primary structures, the secondary structures and the supply structures. Within the framework of these rules, possible interactions of primary and secondary structures must also be taken into account. Importance factors are used in seismic design in order to take into account the usually higher risk potential of an industrial unit compared to conventional building structures. Industrial facilities must be able to withstand seismic actions because of possibly wide-ranging damage consequences in addition to losses due to production standstill and the destruction of valuable equipment. The chapter presents an integrated concept for the seismic design of industrial units based on current seismic standards and the latest research results. Special attention is devoted to the seismic design of steel thin-walled silos and tank structures.},
  language  = {en}
}
@article{RossiStupazziniParisietal.2019,
  author    = {Rossi, Leonardo and Stupazzini, Marco and Parisi, Davide and Holtschoppen, Britta and Ruggieri, Gabriella and Butenweg, Christoph},
  title     = {Empirical fragility functions and loss curves for long-span-beam buildings based on the 2012 Emilia-Romagna earthquake official database},
  series = {Bulletin of Earthquake Engineering},
  volume    = {18},
  journal   = {Bulletin of Earthquake Engineering},
  publisher = {Springer Nature},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-019-00759-1},
  pages     = {1693 -- 1721},
  year      = {2019},
  abstract  = {The 2012 Emilia-Romagna earthquake, that mainly struck the homonymous Italian region provoking 28 casualties and damage to thousands of structures and infrastructures, is an exceptional source of information to question, investigate, and challenge the validity of seismic fragility functions and loss curves from an empirical standpoint. Among the most recent seismic events taking place in Europe, that of Emilia-Romagna is quite likely one of the best documented, not only in terms of experienced damages, but also for what concerns occurred losses and necessary reconstruction costs. In fact, in order to manage the compensations in a fair way both to citizens and business owners, soon after the seismic sequence, the regional administrative authority started (1) collecting damage and consequence-related data, (2) evaluating information sources and (3) taking care of the cross-checking of various reports. A specific database—so-called Sistema Informativo Gestione Europa (SFINGE)—was devoted to damaged business activities. As a result, 7 years after the seismic events, scientists can rely on a one-of-a-kind, vast and consistent database, containing information about (among other things): (1) buildings' location and dimensions, (2) occurred structural damages, (3) experienced direct economic losses and (4) related reconstruction costs. The present work is focused on a specific data subset of SFINGE, whose elements are Long-Span-Beam buildings (mostly precast) deployed for business activities in industry, trade or agriculture. With the available set of data, empirical fragility functions, cost and loss ratio curves are elaborated, that may be included within existing Performance Based Earthquake Engineering assessment toolkits.},
  language  = {en}
}
@article{ButenwegMarinkovicSalatic2019,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Salatic, Ratko},
  title     = {Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-019-00602-7},
  pages     = {3397 -- 3422},
  year      = {2019},
  language  = {en}
}
@article{MarinkovicButenweg2019,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames},
  series = {Engineering Structures},
  volume    = {197},
  journal   = {Engineering Structures},
  number    = {Article 109435},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2019.109435},
  year      = {2019},
  language  = {en}
}
@article{LyonsMikuckiGermanetal.2019,
  author    = {Lyons, W. Berry and Mikucki, Jill A. and German, Laura A. and Welch, Kathleen A. and Welch, Susan A. and Gardener, Christopher B. and Tulaczyk, Slawek M. and Pettit, Erin C. and Kowalski, Julia and Dachwald, Bernd},
  title     = {The Geochemistry of Englacial Brine from Taylor Glacier, Antarctica},
  series = {Journal of Geophysical Research: Biogeosciences},
  journal   = {Journal of Geophysical Research: Biogeosciences},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {2169-8961},
  doi       = {10.1029/2018JG004411},
  year      = {2019},
  language  = {en}
}
@book{BudelmannButenweg2019,
  author    = {Budelmann, Harald and Butenweg, Christoph},
  title     = {Mauerwerksbau: Bemessung und Konstruktion : Baustoffe, Bemessung und Ausf{\"u}hrung, Brandschutz und Erdbeben, Nachhaltigkeit, Bewertung und Revitalisierung},
  editor    = {Gunkler, Erhard},
  edition   = {2. {\"u}berarbeitete und aktualisierte Auflage},
  publisher = {Bundesanzeiger Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8462-0371-2},
  pages     = {XXIV, 738 S. ; Illustrationen, Diagramme},
  year      = {2019},
  language  = {de}
}
@article{TurlybekulyPogrebnjakSukhodubetal.2019,
  author    = {Turlybekuly, Amanzhol and Pogrebnjak, Alexander and Sukhodub, L. F. and Sukhodub, Liudmyla B. and Kistaubayeva, A. S. and Savitskaya, Irina and Shokatayeva, D. H. and Bondar, Oleksandr V. and Shaimardanov, Z. K. and Plotnikov, Sergey V. and Shaimardanova, B. H. and Digel, Ilya},
  title     = {Synthesis, characterization, in vitro biocompatibility and antibacterial properties study of nanocomposite materials based on hydroxyapatite-biphasic ZnO micro- and nanoparticles embedded in Alginate matrix},
  series = {Materials Science and Engineering C},
  volume    = {104},
  journal   = {Materials Science and Engineering C},
  number    = {Article number 109965},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.msec.2019.109965},
  year      = {2019},
  language  = {en}
}
@book{MeskourisButenwegHinzenetal.2019,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Hinzen, Klaus-G. and H{\"o}ffer, R{\"u}diger},
  title     = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-662-57550-5},
  doi       = {10.1007/978-3-662-57550-5},
  year      = {2019},
  language  = {en}
}
@incollection{FinkenbergerBaumeisterKoch2019,
  author    = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria and Koch, Christian},
  title     = {Komplement und Verst{\"a}rker : der Diskurs geht weiter},
  series = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  booktitle = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-578-9},
  pages     = {40 -- 49},
  year      = {2019},
  language  = {de}
}
@book{WagemannTippkoetter2019,
  author    = {Wagemann, Kurt and Tippk{\"o}tter, Nils},
  title     = {Biorefineries / Kurt Wagemann, Nils Tippk{\"o}tter (editors)},
  series = {Advances in biochemical engineering/biotechnology book series (ABE)},
  journal   = {Advances in biochemical engineering/biotechnology book series (ABE)},
  publisher = {Springer},
  address   = {Cham (Switzerland)},
  isbn      = {978-3-319-97117-9},
  doi       = {10.1007/978-3-319-97119-3},
  pages     = {VI, 549 Seiten},
  year      = {2019},
  language  = {en}
}
@article{ClaerFerreinSchiffer2019,
  author    = {Claer, Mario and Ferrein, Alexander and Schiffer, Stefan},
  title     = {Calibration of a Rotating or Revolving Platform with a LiDAR Sensor},
  series = {Applied Sciences},
  volume    = {Volume 9},
  journal   = {Applied Sciences},
  number    = {issue 11, 2238},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3417},
  doi       = {10.3390/app9112238},
  pages     = {18 Seiten},
  year      = {2019},
  language  = {en}
}
@article{LeschingerBirgelHackletal.2019,
  author    = {Leschinger, Tim and Birgel, Stefan and Hackl, Michael and Staat, Manfred and M{\"u}ller, Lars Peter and Wegmann, Kilian},
  title     = {A musculoskeletal shoulder simulation of moment arms and joint reaction forces after medialization of the supraspinatus footprint in rotator cuff repair},
  series = {Computer Methods in Biomechanics and Biomedical Engineering},
  journal   = {Computer Methods in Biomechanics and Biomedical Engineering},
  number    = {Early view},
  publisher = {Taylor \& Francis},
  address   = {London},
  doi       = {10.1080/10255842.2019.1572749},
  year      = {2019},
  language  = {en}
}
@incollection{DachwaldOhndorf2019,
  author    = {Dachwald, Bernd and Ohndorf, Andreas},
  title     = {Global optimization of continuous-thrust trajectories using evolutionary neurocontrol},
  series = {Modeling and Optimization in Space Engineering},
  booktitle = {Modeling and Optimization in Space Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-10501-3},
  doi       = {10.1007/978-3-030-10501-3_2},
  pages     = {33 -- 57},
  year      = {2019},
  abstract  = {Searching optimal continuous-thrust trajectories is usually a difficult and time-consuming task. The solution quality of traditional optimal-control methods depends strongly on an adequate initial guess because the solution is typically close to the initial guess, which may be far from the (unknown) global optimum. Evolutionary neurocontrol attacks continuous-thrust optimization problems from the perspective of artificial intelligence and machine learning, combining artificial neural networks and evolutionary algorithms. This chapter describes the method and shows some example results for single- and multi-phase continuous-thrust trajectory optimization problems to assess its performance. Evolutionary neurocontrol can explore the trajectory search space more exhaustively than a human expert can do with traditional optimal-control methods. Especially for difficult problems, it usually finds solutions that are closer to the global optimum. Another fundamental advantage is that continuous-thrust trajectories can be optimized without an initial guess and without expert supervision.},
  language  = {en}
}
@article{GoettenHavermannBraunetal.2019,
  author    = {G{\"o}tten, Falk and Havermann, Marc and Braun, Carsten and Gomez, Francisco and Bil, Cees},
  title     = {RANS Simulation Validation of a Small Sensor Turret for UAVs},
  series = {Journal of Aerospace Engineering},
  volume    = {32},
  journal   = {Journal of Aerospace Engineering},
  number    = {5},
  publisher = {ASCE},
  address   = {New York},
  issn      = {1943-5525},
  doi       = {10.1061/(ASCE)AS.1943-5525.0001055},
  pages     = {Article number 04019060},
  year      = {2019},
  abstract  = {Recent Unmanned Aerial Vehicle (UAV) design procedures rely on full aircraft steady-state Reynolds-Averaged-Navier-Stokes (RANS) analyses in early design stages. Small sensor turrets are included in such simulations, even though their aerodynamic properties show highly unsteady behavior. Very little is known about the effects of this approach on the simulation outcomes of small turrets. Therefore, the flow around a model turret at a Reynolds number of 47,400 is simulated with a steady-state RANS approach and compared to experimental data. Lift, drag, and surface pressure show good agreement with the experiment. The RANS model predicts the separation location too far downstream and shows a larger recirculation region aft of the body. Both characteristic arch and horseshoe vortex structures are visualized and qualitatively match the ones found by the experiment. The Reynolds number dependence of the drag coefficient follows the trend of a sphere within a distinct range. The outcomes indicate that a steady-state RANS model of a small sensor turret is able to give results that are useful for UAV engineering purposes but might not be suited for detailed insight into flow properties.},
  language  = {en}
}
@article{GoettscheAlexopoulosDuemmleretal.2019,
  author    = {G{\"o}ttsche, Joachim and Alexopoulos, Spiros and D{\"u}mmler, Andreas and Maddineni, S. K.},
  title     = {Multi-Mirror Array Calculations With Optical Error},
  pages     = {1 -- 6},
  year      = {2019},
  abstract  = {The optical performance of a 2-axis solar concentrator was simulated with the COMSOL Multiphysics® software. The concentrator consists of a mirror array, which was created using the application builder. The mirror facets are preconfigured to form a focal point. During tracking all mirrors are moved simultaneously in a coupled mode by 2 motors in two axes, in order to keep the system in focus with the moving sun. Optical errors on each reflecting surface were implemented in combination with the solar angular cone of ± 4.65 mrad. As a result, the intercept factor of solar radiation that is available to the receiver was calculated as a function of the transversal and longitudinal angles of incidence. In addition, the intensity distribution on the receiver plane was calculated as a function of the incidence angles.},
  language  = {en}
}
@inproceedings{EichlerSkupinThurnetal.2019,
  author    = {Eichler, Fabian and Skupin, Marco and Thurn, Laura and Kasch, Susanne and Schmidt, Thomas},
  title     = {Operating limits for beam melting of glass materials},
  series = {Modern Technologies in Manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2019)},
  number    = {Article 01004},
  doi       = {10.1051/matecconf/201929901004},
  pages     = {8 Seiten},
  year      = {2019},
  abstract  = {Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.},
  language  = {en}
}
@misc{Golland2019,
  author    = {Golland, Alexander},
  title     = {Das „Recht auf Vergessenwerden" unter Geltung der DSGVO: Rechtm{\"a}ßigkeit der Anzeige sensibler Daten},
  series = {DSB Datenschutz-Berater},
  journal   = {DSB Datenschutz-Berater},
  number    = {11},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a.M.},
  issn      = {0170-7256},
  pages     = {262 -- 264},
  year      = {2019},
  language  = {de}
}
@inproceedings{HofmannLimpertMatareetal.2019,
  author    = {Hofmann, Till and Limpert, Nicolas and Matar{\´e}, Victor and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Winning the RoboCup Logistics League with Fast Navigation, Precise Manipulation, and Robust Goal Reasoning},
  series = {RoboCup 2019: Robot World Cup XXIII. RoboCup},
  booktitle = {RoboCup 2019: Robot World Cup XXIII. RoboCup},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-35699-6},
  doi       = {10.1007/978-3-030-35699-6_41},
  pages     = {504 -- 516},
  year      = {2019},
  language  = {en}
}
@article{ValeroBungCrookston2019,
  author    = {Valero, D. and Bung, Daniel Bernhard and Crookston, B. M.},
  title     = {Closure to "Energy Dissipation of a Type III Basin under Design and Adverse Conditions for Stepped and Smooth Spillways"},
  series = {Journal of Hydraulic Engineering},
  volume    = {146},
  journal   = {Journal of Hydraulic Engineering},
  number    = {2},
  publisher = {ASCE},
  address   = {Reston, Va.},
  doi       = {10.1061/(ASCE)HY.1943-7900.0001669},
  year      = {2019},
  language  = {en}
}
@inproceedings{FingerKhalsaKreyeretal.2019,
  author    = {Finger, Felix and Khalsa, R. and Kreyer, J{\"o}rg and Mayntz, Joscha and Braun, Carsten and Dahmann, Peter and Esch, Thomas and Kemper, Hans and Schmitz, O. and Bragard, Michael},
  title     = {An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft},
  series = {Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt},
  pages     = {15 Seiten},
  year      = {2019},
  abstract  = {In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented.},
  language  = {en}
}
@inproceedings{ZingsheimGrimmerOrtneretal.2019,
  author    = {Zingsheim, Jonas and Grimmer, Timo and Ortner, Marion and Schmaderer, Christoph and Hauser, Christine and Kotliar, Konstantin},
  title     = {Recognition of subjects with mild cognitive impairment (MCI) by the use of retinal arterial vessels.},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {36 -- 37},
  year      = {2019},
  language  = {en}
}
@article{FunkeBeckmannAbanteriba2019,
  author    = {Funke, Harald and Beckmann, Nils and Abanteriba, Sylvester},
  title     = {An overview on dry low NOx micromix combustor development for hydrogen-rich gas turbine applications},
  series = {International Journal of Hydrogen Energy},
  volume    = {44},
  journal   = {International Journal of Hydrogen Energy},
  number    = {13},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0360-3199},
  doi       = {10.1016/j.ijhydene.2019.01.161},
  pages     = {6978 -- 6990},
  year      = {2019},
  language  = {en}
}
@incollection{PieronekKleefeld2019,
  author    = {Pieronek, Lukas and Kleefeld, Andreas},
  title     = {The Method of Fundamental Solutions for Computing Interior Transmission Eigenvalues of Inhomogeneous Media},
  series = {Integral Methods in Science and Engineering: Analytic Treatment and Numerical Approximations},
  booktitle = {Integral Methods in Science and Engineering: Analytic Treatment and Numerical Approximations},
  editor    = {Constanda, Christian and Harris, Paul},
  publisher = {Birkh{\"a}user},
  address   = {Cham},
  isbn      = {978-3-030-16077-7},
  doi       = {10.1007/978-3-030-16077-7_28},
  pages     = {353 -- 365},
  year      = {2019},
  abstract  = {The method of fundamental solutions is applied to the approximate computation of interior transmission eigenvalues for a special class of inhomogeneous media in two dimensions. We give a short approximation analysis accompanied with numerical results that clearly prove practical convenience of our alternative approach.},
  language  = {en}
}
@article{FingerGoetten2019,
  author    = {Finger, Felix and G{\"o}tten, Falk},
  title     = {Neue Ans{\"a}tze f{\"u}r die Entwicklung von unbemannten Flugger{\"a}ten},
  series = {Ingenieurspiegel},
  volume    = {2019},
  journal   = {Ingenieurspiegel},
  number    = {1},
  isbn      = {1868-5919},
  pages     = {67 -- 68},
  year      = {2019},
  abstract  = {Wie sieht das unbemannte Flugzeug von {\"U}bermorgen aus? Dieser Frage stellen sich Forscher an der Fachhochschule Aachen. Die weltweit rasant fortschreitende Entwicklung des Marktes f{\"u}r unbemannte Flugger{\"a}te (UAVs - „Unmanned Aerial Vehicles") bietet großes Potenzial f{\"u}r Wachstum und Wertsch{\"o}pfung. Unbemannte fliegende Systeme k{\"o}nnen - f{\"u}r bestimmte Anwendungsgebiete - wesentlich g{\"u}nstiger, kleiner und effizienter ausgelegt werden als bemannte L{\"o}sungen. Dabei sind sich viele Unternehmen {\"u}ber das m{\"o}gliche Potential dieser Technologie noch gar nicht bewusst.},
  language  = {de}
}
@incollection{Golland2019,
  author    = {Golland, Alexander},
  title     = {Kommentierung von Artikel 94 bis 99 Datenschutz-Grundverordnung},
  series = {DSGVO-BDSG},
  booktitle = {DSGVO-BDSG},
  editor    = {Taeger, J{\"u}rgen and Gabel, Detlev},
  edition   = {3., v{\"o}llig neue bearbeitete und wesentlich erweiterte Auflage},
  publisher = {Fachmedien Recht und Wirtschaft},
  address   = {Frankfurt am Main},
  isbn      = {978-3-8005-1659-9},
  year      = {2019},
  abstract  = {Das Werk kommentiert leicht verst{\"a}ndlich, aktuell und praxisnah die DSGVO wie auch das neue BDSG. Datenverarbeiter erhalten damit eine umfassende Darstellung mit Handlungsempfehlungen zum gesamten neuen Datenschutzrecht.},
  language  = {de}
}
@article{JungStaat2019,
  author    = {Jung, Alexander and Staat, Manfred},
  title     = {Modeling and simulation of human induced pluripotent stem cell-derived cardiac tissue},
  series = {GAMM - Mitteilungen der Gesellschaft f{\"u}r Angewandte Mathematik und Mechanik},
  volume    = {42},
  journal   = {GAMM - Mitteilungen der Gesellschaft f{\"u}r Angewandte Mathematik und Mechanik},
  number    = {4},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1522-2608},
  doi       = {10.1002/gamm.201900002},
  pages     = {11 Seiten},
  year      = {2019},
  language  = {en}
}
@incollection{TippkoetterMoehringRothetal.2019,
  author    = {Tippk{\"o}tter, Nils and M{\"o}hring, Sophie and Roth, Jasmine and Wulfhorst, Helene},
  title     = {Logistics of lignocellulosic feedstocks: preprocessing as a preferable option},
  series = {Biorefineries},
  booktitle = {Biorefineries},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-97117-9},
  doi       = {10.1007/10_2017_58},
  pages     = {43 -- 68},
  year      = {2019},
  abstract  = {In comparison to crude oil, biorefinery raw materials are challenging in concerns of transport and storage. The plant raw materials are more voluminous, so that shredding and compacting usually are necessary before transport. These mechanical processes can have a negative influence on the subsequent biotechnological processing and shelf life of the raw materials. Various approaches and their effects on renewable raw materials are shown. In addition, aspects of decentralized pretreatment steps are discussed. Another important aspect of pretreatment is the varying composition of the raw materials depending on the growth conditions. This problem can be solved with advanced on-site spectrometric analysis of the material.},
  language  = {en}
}
@article{BronderPoghossianJessingetal.2019,
  author    = {Bronder, Thomas and Poghossian, Arshak and Jessing, Max P. and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Surface regeneration and reusability of label-free DNA biosensors based on weak polyelectrolyte-modified capacitive field-effect structures},
  series = {Biosensors and Bioelectronics},
  volume    = {126},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2018.11.019},
  pages     = {510 -- 517},
  year      = {2019},
  language  = {en}
}
@article{SchildtBraunMarzocca2019,
  author    = {Schildt, Ph. and Braun, Carsten and Marzocca, P.},
  title     = {Metric evaluating potentials of condition-monitoring approaches for hybrid electric aircraft propulsion systems},
  series = {CEAS Aeronautical Journal},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1869-5590},
  doi       = {10.1007/s13272-019-00411-3},
  pages     = {1 -- 14},
  year      = {2019},
  language  = {en}
}
@inproceedings{ValeroKramerBungetal.2019,
  author    = {Valero, Daniel and Kramer, Matthias and Bung, Daniel Bernhard and Chanson, Hubert},
  title     = {A stochastic bubble generator for air-water flow research},
  series = {E-proceedings of the 38th IAHR World Congress, September 1-6, 2019, Panama City, Panama},
  booktitle = {E-proceedings of the 38th IAHR World Congress, September 1-6, 2019, Panama City, Panama},
  doi       = {10.3850/38WC092019-0909},
  pages     = {5714 -- 5721},
  year      = {2019},
  language  = {en}
}
@article{JayaramanMummidisettyLoeschetal.2019,
  author    = {Jayaraman, Chandrasekaran and Mummidisetty, Chaitanya Krishna and Loesch, Alexandra and Kaur, Sandi and Hoppe-Ludwig, Shenan and Staat, Manfred and Jayaraman, Arun},
  title     = {Postural and metabolic benefits of using a forearm support walker in older adults with impairments},
  series = {Archives of Physical Medicine and Rehabilitation},
  volume    = {Volume 100},
  journal   = {Archives of Physical Medicine and Rehabilitation},
  number    = {Issue 4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0003-9993},
  doi       = {10.1016/j.apmr.2018.10.001},
  pages     = {638 -- 647},
  year      = {2019},
  language  = {en}
}
@inproceedings{Golland2019,
  author    = {Golland, Alexander},
  title     = {Datenschutzregulierung als Eingriff in Wertsch{\"o}pfungsmodelle},
  series = {Die Zukunft der Daten{\"o}konomie : zwischen Gesch{\"a}ftsmodell, Kollektivgut und Verbraucherschutz},
  booktitle = {Die Zukunft der Daten{\"o}konomie : zwischen Gesch{\"a}ftsmodell, Kollektivgut und Verbraucherschutz},
  editor    = {Ochs, Carsten and Friedewald, Michael and Hess, Thomas and Lamla, J{\"o}rn},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  isbn      = {978-3-658-27510-5},
  pages     = {45 -- 68},
  year      = {2019},
  abstract  = {Das Kopplungsverbot verbietet, die Nutzung einer Dienstleistung von der Erteilung einer nicht f{\"u}r die Leistungserbringung erforderlichen Einwilligung abh{\"a}ngig zu machen. Personalisierte Werbung wird hierdurch erheblich erschwert. Anbieter k{\"o}nnen jedoch durch Bereitstellung eines alternativen, einwilligungsfreien Zugangs zu derselben Leistung ihren Dienst datenschutzkonform anbieten. Ein solcher Zugang muss nicht zwingend in Form eines fixen Entgelts gestaltet sein. Vielmehr ist es datenschutzrechtlich in gewissem Umfang zul{\"a}ssig, Preise unter Einbeziehung personenbezogener Daten dynamisch zu gestalten.},
  language  = {de}
}
@misc{StaatHorbachGatzweiler2019,
  author    = {Staat, Manfred and Horbach, Andreas and Gatzweiler, Karl-Heinz},
  title     = {Biaxiales Materialpr{\"u}fsystem und Verfahren zu dessen Anwendung},
  year      = {2019},
  abstract  = {System und Verfahren zur Durchf{\"u}hrung von Messungen biaxialer und kreuzf{\"o}rmiger Zugversuche, wobei ein Weg oder eine Kraft auf eine Materialprobe {\"u}ber mindestens zwei Nadelarme mit Nadeln geleitet wird, die in einem Geh{\"a}use gelagert sind, wobei die Arme und/oder Nadelarme f{\"u}r eine ungehinderte Querkontraktion bei gleichm{\"a}ßiger Lasteinleitung um eine Achse drehbar gelagert und seitlich auslenkbar sind.},
  language  = {de}
}
@article{LinderBecklerDoerretal.2019,
  author    = {Linder, Peter and Beckler, Matthias and Doerr, Leo and Stoelzle-Feix, Sonja and Fertig, Niels and Jung, Alexander and Staat, Manfred and Gossmann, Matthias},
  title     = {A new in vitro tool to investigate cardiac contractility under physiological mechanical conditions},
  series = {Journal of Pharmacological and Toxicological Methods},
  volume    = {99},
  journal   = {Journal of Pharmacological and Toxicological Methods},
  number    = {Article number 106595},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1056-8719},
  doi       = {10.1016/j.vascn.2019.05.162},
  year      = {2019},
  language  = {en}
}
@misc{Golland2019,
  author    = {Golland, Alexander},
  title     = {Rezension zu: Reimer - Verwaltungsdatenschutzrecht: Das neue Recht f{\"u}r die beh{\"o}rdliche Praxis (2019)},
  series = {DSB Datenschutz-Berater},
  volume    = {43},
  journal   = {DSB Datenschutz-Berater},
  number    = {9},
  issn      = {0170-7256},
  pages     = {210 -- 210},
  year      = {2019},
  language  = {de}
}
@inproceedings{LudowicyRingsFingeretal.2019,
  author    = {Ludowicy, Jonas and Rings, Ren{\´e} and Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {Impact of Propulsion Technology Levels on the Sizing and Energy Consumption for Serial HybridElectric General Aviation Aircraft},
  series = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  booktitle = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  pages     = {14 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{SattlerAlexopoulosChicoCaminosetal.2019,
  author    = {Sattler, Johannes Christoph and Alexopoulos, Spiros and Chico Caminos, Ricardo Alexander and Mitchell, John C. and Ruiz, Victor C. and Kalogirou, Soteris and Ktistis, Panayiotis K. and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117663},
  pages     = {150007-1 -- 150007-8},
  year      = {2019},
  language  = {en}
}
@book{KrauseUlke2019,
  author    = {Krause, Thomas and Ulke, Bernd},
  title     = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb: Klausurvorbereitung mit ausf{\"u}hrlichen L{\"o}sungen},
  edition   = {3., {\"u}berarb. Aufl.},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  doi       = {10.1007/978-3-658-23127-9},
  pages     = {XI, 347 S., 227 Abb.},
  year      = {2019},
  language  = {de}
}
@book{KrauseUlke2019,
  author    = {Krause, Thomas and Ulke, Bernd},
  title     = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb: Klausurvorbereitung mit ausf{\"u}hrlichen L{\"o}sungen},
  edition   = {3., Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23126-2},
  pages     = {XI, 347 Seiten ; Illustrationen},
  year      = {2019},
  language  = {de}
}
@techreport{TippkoetterWagner2019,
  author    = {Tippk{\"o}tter, Nils and Wagner, Sebastian},
  title     = {Biomimetischer Klebstoff aus ligninhaltigen Pflanzenresten (Teilvorhaben 1 und 2) : Schlussbericht zum Vorhaben : Laufzeit: 01.01.2016 bis 31.03.2019},
  publisher = {FH Aachen},
  address   = {J{\"u}lich},
  doi       = {10.2314/KXP:169732777X},
  pages     = {109 S.},
  year      = {2019},
  language  = {de}
}