@techreport{StapenhorstVanDenBerghGoliaschetal.2016, author = {Stapenhorst, Carolin and Van Den Bergh, Wim and Goliasch, Simon and K{\"u}hnle, Christian and L{\"a}ufer, Jonas and Ring, Jana and Schmalt, Nicola}, title = {Roman traces for cross-border identification}, series = {Design Strategies for Transforming Cross-Border Regions}, journal = {Design Strategies for Transforming Cross-Border Regions}, pages = {1 Seite}, year = {2016}, abstract = {The research group focuses on the characteristics in the land-and cityscapes of the Drielanden-zone, which contribute to generate common identities, as well as on those features that trigger differences and specificities of the adjacent countries that enrich the perception of the zone. In this research, the instruments of cartography and land survey system serve to detect and localize the fragmented appearance of relevant historic elements. These analytic procedures help to develop strategies for infrastructures and processes that gradually initiate local forms of cross-border tourism. The architectural research displays how top-down and bottom-up interventions can be combined in order to guarantee a sustainable use and development of the considered area.}, language = {en} } @incollection{Stapenhorst2016, author = {Stapenhorst, Carolin}, title = {La Land Art come forma di cartografia applicata / Land Art as a Form of Applied Cartography}, series = {Tracciare piani, disegnare carte / Sketching plans, drawing maps}, booktitle = {Tracciare piani, disegnare carte / Sketching plans, drawing maps}, editor = {Palma, Riccardo and Dutto, Andrea Alberto}, publisher = {Accademia University Press}, address = {Turin}, isbn = {978-88-99982-24-9}, pages = {195}, year = {2016}, language = {it} } @book{Stapenhorst2016, author = {Stapenhorst, Carolin}, title = {Cento Tavole}, publisher = {RWTH Aachen}, address = {Aachen}, pages = {50 Seiten}, year = {2016}, language = {de} } @incollection{GuggerStapenhorst2008, author = {Gugger, Harry and Stapenhorst, Carolin}, title = {From city to detail: the sphere of the architect}, series = {Explorations in architecture}, booktitle = {Explorations in architecture}, editor = {Geiser, Reto}, publisher = {Birkh{\"a}user}, address = {Basel}, isbn = {978-3-7643-8921-5}, pages = {50 -- 53}, year = {2008}, language = {en} } @inproceedings{DiIorioNobileStapenhorst2010, author = {Di Iorio, Marina and Nobile, Maria Luna and Stapenhorst, Carolin}, title = {Martinella}, series = {Edifici alti e paesaggio}, booktitle = {Edifici alti e paesaggio}, editor = {Bovati, Marco and Di Franco, Andrea}, publisher = {Maggioli}, address = {Santarcangelo di Romagna}, isbn = {978-88-387-4434-1}, pages = {191 -- 202}, year = {2010}, language = {it} } @article{RakeEnningKurthetal.1994, author = {Rake, Heinrich and Enning, Manfred and Kurth, Johannes and Schr{\"o}der, Walter}, title = {Automatic uncoupler completes automation at the hump}, series = {RGI - Railway Gazette International}, volume = {150}, journal = {RGI - Railway Gazette International}, number = {6}, publisher = {Reed Business}, address = {Sutton}, issn = {0373-5346}, pages = {371 -- 374}, year = {1994}, language = {en} } @article{RakeSchwanhaeusserFrederichetal.1993, author = {Rake, Heinrich and Schwanh{\"a}ußer, Wulf and Frederich, Fritz and Enning, Manfred}, title = {Automatisierung von Ablaufanlagen mit dem Kupplungsroboter}, series = {ETR - Eisenbahntechnische Rundschau}, journal = {ETR - Eisenbahntechnische Rundschau}, number = {4}, publisher = {DVV Media Group}, address = {Hamburg}, issn = {0013-2845}, pages = {249 -- 254}, year = {1993}, language = {de} } @inproceedings{EnningHilgers2023, author = {Enning, Manfred and Hilgers, Rudolf}, title = {Die Assistierte Bremsprobe als Br{\"u}cke zur Vollautomatisierung des Schieneng{\"u}terverkehrs}, series = {IRSA 2023: Tagungsband, Proceedings}, booktitle = {IRSA 2023: Tagungsband, Proceedings}, editor = {Nießen, Nils and Schindler, Christian}, publisher = {RWTH Aachen}, address = {Aachen}, doi = {10.18154/RWTH-2024-00257}, pages = {60 -- 75}, year = {2023}, language = {de} } @article{ManfredMaySutter2020, author = {Manfred, Enning and May, J{\"o}rg and Sutter, Stefan}, title = {Innovation am G{\"u}terwagen am Beispiel der Automatischen Bremsprobe}, series = {ETR - Eisenbahntechnische Rundschau}, journal = {ETR - Eisenbahntechnische Rundschau}, number = {12}, publisher = {DVV Media Group}, address = {Hamburg}, issn = {0013-2845}, pages = {14 -- 19}, year = {2020}, abstract = {Mit der Digitalen Automatischen Kupplung beginnt ein neues Kapitel des Schieneng{\"u}terverkehrs, in dem zusammengestellte Wagen sich automatisch in wenigen Minuten abfahrbereit machen, ohne dass der Mensch eingreifen muss. Eines des gr{\"o}ßten Hemmnisse der umweltfreundlichen Schiene wird dann entfallen. Notwendig ist jetzt eine Diskussion {\"u}ber den Umfang und die Systemgrenzen der Automatischen Bremsprobe.}, language = {de} } @article{EnningSchmidtWilbring2019, author = {Enning, Manfred and Schmidt, Bernd and Wilbring, Daniela}, title = {Auf dem Weg zur autonomen Anschlussbedienung}, series = {Privatbahn-Magazin}, journal = {Privatbahn-Magazin}, number = {3}, publisher = {Bahn Media}, address = {Suhlendorf}, issn = {1865-0163}, pages = {40 -- 43}, year = {2019}, language = {de} } @inproceedings{PfaffSchmidtWilbringetal.2019, author = {Pfaff, Raphael and Schmidt, Bernd and Wilbring, Daniela and Franzen, Julian}, title = {Wagon4.0 - the smart wagon for improved integration into Industry 4.0 plants}, series = {Proceedings of the International Heavy Haul Association STS Conference 2019}, booktitle = {Proceedings of the International Heavy Haul Association STS Conference 2019}, pages = {7 Seiten}, year = {2019}, abstract = {In many instances, freight vehicles exchange load or information with plants that are or will soon be Industry4.0 plants. The Wagon4.0 concept, as developed in close cooperation with e.g. port or mine operations, offers a maximum in railway operational efficiency while providing strong business cases already in the respective plant interaction. The Wagon4.0 consists of main components, a power supply, data network, sensors, actuators and an operating system, the so called WagonOS. The Wagon OS is implemented in a granular, self-sufficient manner, to allow basic features such as WiFi-Mesh and train christening in remote areas without network connection. Furthermore, the granularity of the operating system allows to extend the familiar app concept to freight rail rolling stock, making it possible to use specialised actuators for certain applications, e.g. an electrical parking brake or an auxiliary drive. In order to facilitate migration to the Wagon4.0 for existing fleets, a migration concept featuring five levels of technical adaptation was developed. The present paper investigates the benefits of Wagon4.0-implementations for the particular challenges of heavy haul operations by focusing on train christening, ep-assisted braking, autonomous last mile and traction boost operation as well as improved maintenance schedules}, language = {en} } @inproceedings{WilbringEnningPfaffetal.2019, author = {Wilbring, Daniela and Enning, Manfred and Pfaff, Raphael and Schmidt, Bernd}, title = {Neue Perspektiven f{\"u}r die Bahn in der Produktions- und Distributionslogistik durch Prozessautomation}, series = {IRSA 2019: Tagungsband, Proceedings}, booktitle = {IRSA 2019: Tagungsband, Proceedings}, editor = {de Doncker, Rik W. and Nießen, Nils and Schindler, Christian}, publisher = {RWTH Aachen}, address = {Aachen}, doi = {10.18154/RWTH-2020-00014}, pages = {128 -- 142}, year = {2019}, abstract = {Deutschland braucht mehr Eisenbahn um CO2-Emissionen aus dem Verkehr zu reduzieren. Sie muss zum R{\"u}ckgrat aktueller Logistikprozesse, z.B. bei Kaufmannsg{\"u}tern und E-Commerce, werden. Dies geht nicht ohne neuartige betriebliche Konzepte und eine Transformation des G{\"u}terwagens von einem „dummen St{\"u}ck Stahl" zu einem modernen Werkzeug der Logistik. Als „G{\"u}terwagen 4.0" wird ein kommunikativer und kooperativer G{\"u}terwagen verstanden, der die Voraussetzung zur Automatisierung aller Prozesse der Zugvorbereitung bereitstellt, sich aber ansonsten vollkommen kompatibel mit heutigen Betriebsverfahren im Hauptlauf pr{\"a}sentiert. Durch Kommunikation zwischen G{\"u}terwagen und umgebenden intelligenten Systemen im Sinne eines „Internet der Dinge" gelingt damit unter Anderem die Realisierung hoch effizienter Gleisanschlussverkehre, die der G{\"u}terbahn neue M{\"a}rkte abseits der klassisch bahn-affinen Verkehre erschließen und letztlich den Wandel zu einer nachhaltigen G{\"u}termobilit{\"a}t f{\"o}rdern.}, language = {de} } @article{EnningPfaff2017, author = {Enning, Manfred and Pfaff, Raphael}, title = {G{\"u}terwagen 4.0 - Mehr als nur technischer Fortschritt}, series = {Privatbahn-Magazin}, journal = {Privatbahn-Magazin}, number = {2}, publisher = {Bahn Media}, address = {Suhlendorf}, issn = {1865-0163}, pages = {21 -- 25}, year = {2017}, abstract = {Lokomotiven sind dank modernster Konzepte der Antriebstechnik heute energiesparend und umweltfreundlich. Eine Ausr{\"u}stung mit Telematik und Assistenzfunktionen ist Standard. Auf der Strecke zeigt sich moderne Technik in Form elektronischer Stellwerke und Zugsicherungssysteme und in Rangier- und Abstellanlagen als EOW-Technik. Am G{\"u}terwagen hingegen ist der technische Fortschritt komplett vorbeigegangen. Auch beim modernsten Wagen (Abb. 1) ist die einzige „Automatik"-Funktion die zentral {\"u}ber die Hauptluftleitung (HL) versorgte und bet{\"a}tigte Luftbremse.}, language = {de} } @article{EnningPfaff2016, author = {Enning, Manfred and Pfaff, Raphael}, title = {Digitalisierung bringt mehr G{\"u}ter auf die Schiene}, series = {Sonderprojekte ATM/MTZ}, volume = {21}, journal = {Sonderprojekte ATM/MTZ}, number = {6 (suppl.)}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, issn = {2509-4610}, doi = {10.1007/s41491-016-0570-7}, pages = {34 -- 37}, year = {2016}, language = {de} } @incollection{Stapenhorst2014, author = {Stapenhorst, Carolin}, title = {Organizzare l'addizione}, series = {Atlante di progettazione architettonica}, booktitle = {Atlante di progettazione architettonica}, editor = {Palma, Riccardo and Ravagnati, Carlo}, publisher = {Citt{\`a}StudiEdizioni}, address = {Mailand}, isbn = {978-88-251-7385-7}, pages = {490 -- 505}, year = {2014}, language = {it} } @phdthesis{Stapenhorst2012, author = {Stapenhorst, Carolin}, title = {The concept as an operant instrument within the interdisciplinarity of the architectural design process}, publisher = {Politecnico di Torino}, address = {Turin}, pages = {242 Seiten}, year = {2012}, abstract = {In the introduction to their book "What is philosophy?" Gilles Deleuze and Felix Guattari deplore the inflationary and trivialised use of the term concept: "Finally, the most shameful moment came when computer science, marketing, design and advertising, all the disciplines of communication, seized hold of the word concept itself and said: 'This is our concern, we are the creative ones, we are the ideas men! We are the friends of the concept, we put in our computers.' " This doctoral thesis shares the concern of Gilles Deleuze and Felix Guattari, but still, it is a thesis in architecture and thus collocated within the field of the representatives of the "ideas men". It engages in architectural design theory, and refers in particular to the investigation of methodological approaches within the design process. Therefore, the thesis will not contribute to the philosophical dimension of the term, but intends to overcome its imprecise use within the architectural discourse, in compliance with Eug{\`e}ne Viollet-le-Duc's admonition relative to vague definitions: "Dans les arts, et dans l'architecture en particulier, les d{\´e}finitions vagues ont caus{\´e} bien des erreurs, ont laiss{\´e} germer bien des pr{\´e}jug{\´e}s, enraciner bien des id{\´e}es fausses. On met un mot en avant, chacun y attache un sens diff{\´e}rent." The term concept in architecture is very often used as pure marketing collateral, it serves to sell an idea, a product, a design. Its functional applicability is reduced to a special manner of illustration, produced as one of the various design presentation documents at the end of the design process. In contrast, the original contribution of this thesis aims to give a precise, instrumental dimension to the term concept: the concept is the expression of a specific logic, capable to guide the decisional sequences of the process and thus to improve the quality of the designed projects. The motivation to define a specific instrumentality of the concept is closely connected to the issue of interdisciplinarity in the architects' profession. The interdisciplinary character of the architectural field is widely accepted and discussed as such, but the thesis intends to give a more precise definition of the various kinds of competences involved by classifying them into either the internal or the external group. The traditional notion of interdisciplinarity, predominantly seen as collaboration between architects and technical experts, and, most notably, the historical, sometimes contentious, relationship between architects and engineers is described. Referring to recent developments, the transformation of the architect's role within the professional sphere, marked by an increasing importance of diverse influences and linked to a growing risk of marginalisation, is illustrated. The thesis describes different ways to adapt to this specific kind of interdisciplinarity, which generally requires the architect's ability to connect and to integrate various contents, different points of view and diverse scales. On the other hand, the big potential which is implicit in the interdisciplinary field is exposed: architects can inform their core competence, the design, by extracting contents of different disciplinary competences, pertaining or not pertaining to their own professional field. They have the possibility to cross fields of external competences in a selective way and by doing so they can build up a corpus of knowledge capable to generate and communicate guidelines and systematic methodologies for their design. At the end, the analysis of these two aspects allows the definition of a more specific professional profile of the architect as specialist of interdisciplinarity. The thesis is concerned with the theories around the design process. The design process is seen as open to inspection and critical evaluation, with major focus on the decisional sequences which characterise it. It concentrates on the process' descriptiveness and the degree of self-conscious approaches applied within it. The importance of regulative, strategic mechanisms is illustrated by testimonies taken from a series of design researches and leads to the functional definition of the figure of the concept as representation of a coherent set of ideas, as generator of a project-specific system of rules and as communicator of decisional strategies. The concept's function is furthermore defined as communicative interface which generates and transmits the system of rules authoritative for all the disciplinary competences involved in the design process, a communicative interface which constitutes a basis of shared convictions capable to increase the efficiency of collaboration. Furthermore, the concept's capacity to explore and elaborate the contents of external disciplines is identified as a possible methodological approach to innovative design thinking. The approach to a specific functional definition of the concept is continued by the description of a series of instruments that are simultaneously generating and communicating it. It is outlined to which degree the concept itself is already the result of an ideational process, collocated within the initial phase of the design proceedings, serving as a guideline to them, but still continuously evolving and adapting in its progression. In addition, it is illustrated how all the diverse instruments of the concept are operational media through which the knowledge transition between different disciplines can occur. The considerations about the concept as operational instrument of design are elaborated with regard to a number of examples of didactical applications that are particularly involved in the development and teaching of specific design methods. These examples illustrate the interrelations between design theory and design education. They are derived from very different schools of architecture and diverse mindsets, but all of them transmit models of conceptual design thinking.}, language = {en} } @book{Stapenhorst2016, author = {Stapenhorst, Carolin}, title = {Concept : a dialogic instrument in architectural design}, publisher = {Jovis}, address = {Berlin}, isbn = {978-3-86859-364-8}, pages = {207 Seiten}, year = {2016}, abstract = {Concept - this is a key term in architectural discourse. However, all too often it is used imprecisely or merely for marketing purposes. What is a concept actually? This publication moves between design theory and design practice and follows the history of the definition of concept in architecture, leading to the formulation of a specifically instrumental and operative definition. It bases concept in architecture on its strategic potential in design decision-making processes. In the changing profession of the designing architect, decisions are increasingly made in multidisciplinary groups. Concept can serve as a dialogic instrument in the process, making it possible to process heterogeneous information from a range of spheres of knowledge. The effective presentation of selected information becomes a relevant interface in the design process, which has a significant influence on the quality of the design.}, language = {en} } @incollection{Stapenhorst2017, author = {Stapenhorst, Carolin}, title = {Robustheit}, series = {Hiatus. Architekturen f{\"u}r die gebrauchte Stadt}, booktitle = {Hiatus. Architekturen f{\"u}r die gebrauchte Stadt}, editor = {Frank, Ute and Lindenmayer, Verena and Loewenberg, Patrick and Rocneanu, Carla}, publisher = {Birkh{\"a}user}, address = {Basel}, isbn = {978-3-0356-1386-5}, pages = {155 -- 164}, year = {2017}, language = {de} } @incollection{Stapenhorst2016, author = {Stapenhorst, Carolin}, title = {Grids. Projektdokumentationen als Denkinstrument}, series = {Manifestationen im Entwurf}, booktitle = {Manifestationen im Entwurf}, editor = {Schmitz, Thomas H. and H{\"a}ußling, Roger and Mareis, Claudia and Groninger, Hannah}, publisher = {Transcript}, address = {Bielefeld}, isbn = {978-3-8394-3160-3}, doi = {10.1515/9783839431603-009}, pages = {185 -- 216}, year = {2016}, language = {de} } @inproceedings{StapenhorstGessnerWoerd2017, author = {Stapenhorst, Carolin and Geßner, Stephan and Woerd, Jan Dirk van der}, title = {ArchitecTours - a close look on structures around us}, series = {Proceedings of IASS Annual Symposia}, booktitle = {Proceedings of IASS Annual Symposia}, editor = {B{\"o}gle, Annette and Grohmann, Manfred}, publisher = {IASS}, address = {Madrid}, issn = {2518-6582}, pages = {9 Seiten}, year = {2017}, abstract = {Architects and civil engineers work together regularly during their professional days and are irreplaceable for each other. This co-operation is sometimes made more difficult by the differences in their disciplinary languages and approaches. Structures are evaluated by architects on the basis of criteria such as spatial impact and usability, while civil engineers analyze them more closely by their bearing and deformation properties, as well as by constructive aspects. This diversity of assessment criteria and approaches is often continued in both academic disciplines in the view on structures. Within the framework of the Exploratory Teaching Space (ETS), a funding program to improve teaching at RWTH Aachen University and to promote new teaching concepts, a project was carried out jointly by the Junior Professorship of Tool-Culture at the Faculty of Architecture and the Institute of Structural Concrete at the Faculty of Civil Engineering. The aim of the project is to present buildings in such a way that the differences in perception between architects and civil engineers are reduced and the common understanding is promoted. The project develops a database, which contains a collection of striking buildings from Aachen and the surrounding area. The buildings are categorized according to terms that come from both disciplinary areas. The collection can be freely explored or crossed through learning trails. The medium of film plays a special role in presenting the buildings. The buildings are assigned to different categories of load bearing structures as linear, planar and spatial structures, and further to different types of material, functional programs and spatial characteristics. Since the buildings are located in the direct vicinity of Aachen, they can be visited by the students. This makes them more sensitive to their environment. Intrinsic motivation, as well as implicit learning is encouraged. The paper will provide a detailed report of the project, its implementation, the feedback of the students and the plans for further development.}, language = {en} } @article{AsarStapenhorst2020, author = {Asar, Hande and Stapenhorst, Carolin}, title = {Zvi Hecker: Drawing on drawing}, series = {Archives of Design Research}, volume = {33}, journal = {Archives of Design Research}, number = {3}, publisher = {Korean Society of Design Science}, address = {Seongnam}, issn = {1226-8046}, doi = {10.15187/adr.2020.08.33.3.45}, pages = {45 -- 53}, year = {2020}, abstract = {Background: Architectural representation, nurtured by the interaction between design thinking and design action, is inherently multi-layered. However, the representation object cannot always reflect these layers. Therefore, it is claimed that these reflections and layerings can gain visibility through 'performativity in personal knowledge', which basically has a performative character. The specific layers of representation produced during the performativity in personal knowledge permit insights about the 'personal way of designing' [1]. Therefore, the question, 'how can these layered drawings be decomposed to understand the personal way of designing', can be defined as the beginning of the study. On the other hand, performativity in personal knowledge in architectural design is handled through the relationship between explicit and tacit knowledge and representational and non-representational theory. To discuss the practical dimension of these theoretical relations, Zvi Hecker's drawing of the Heinz-Galinski-School is examined as an example. The study aims to understand the relationships between the layers by decomposing a layered drawing analytically in order to exemplify personal ways of designing. Methods: The study is based on qualitative research methodologies. First, a model has been formed through theoretical readings to discuss the performativity in personal knowledge. This model is used to understand the layered representations and to research the personal way of designing. Thus, one drawing of Hecker's Heinz-Galinski-School project is chosen. Second, its layers are decomposed to detect and analyze diverse objects, which hint to different types of design tools and their application. Third, Zvi Hecker's statements of the design process are explained through the interview data [2] and other sources. The obtained data are compared with each other. Results: By decomposing the drawing, eleven layers are defined. These layers are used to understand the relation between the design idea and its representation. They can also be thought of as a reading system. In other words, a method to discuss Hecker's performativity in personal knowledge is developed. Furthermore, the layers and their interconnections are described in relation to Zvi Hecker's personal way of designing. Conclusions: It can be said that layered representations, which are associated with the multilayered structure of performativity in personal knowledge, form the personal way of designing.}, language = {en} } @article{StapenhorstZabekHildebrand2018, author = {Stapenhorst, Carolin and Zabek, Magdalena and Hildebrand, Linda}, title = {Communication process and information flow in the architectural planning context}, series = {Creativity game : theory and practice of spatial planning}, journal = {Creativity game : theory and practice of spatial planning}, number = {6}, publisher = {University of Ljubljana}, address = {Ljubljana}, doi = {10.15292/IU-CG.2018.06.066-073}, pages = {66 -- 73}, year = {2018}, abstract = {Against the background of growing data in everyday life, data processing tools become more powerful to deal with the increasing complexity in building design. The architectural planning process is offered a variety of new instruments to design, plan and communicate planning decisions. Ideally the access to information serves to secure and document the quality of the building and in the worst case, the increased data absorbs time by collection and processing without any benefit for the building and its user. Process models can illustrate the impact of information on the design- and planning process so that architect and planner can steer the process. This paper provides historic and contemporary models to visualize the architectural planning process and introduces means to describe today's situation consisting of stakeholders, events and instruments. It explains conceptions during Renaissance in contrast to models used in the second half of the 20th century. Contemporary models are discussed regarding their value against the background of increasing computation in the building process.}, language = {en} } @incollection{Stapenhorst2019, author = {Stapenhorst, Carolin}, title = {Heimat entwerfen?}, series = {Das Eigene und das Fremde - Heimat in Zeiten der Mobilit{\"a}t}, booktitle = {Das Eigene und das Fremde - Heimat in Zeiten der Mobilit{\"a}t}, editor = {Hasse, J{\"u}rgen}, publisher = {Karl Alber}, address = {Baden-Baden}, isbn = {978-3-495-49029-7 (print)}, doi = {10.5771/9783495817568}, pages = {215 -- 246}, year = {2019}, language = {de} } @article{StapenhorstMotta2018, author = {Stapenhorst, Carolin and Motta, Luciano}, title = {Citt{\`a} Olivettiana in Ivrea, Italien}, series = {Bauwelt}, volume = {109}, journal = {Bauwelt}, number = {22}, publisher = {Bauverlag BV}, address = {G{\"u}tersloh}, issn = {0005-6855}, pages = {20 -- 31}, year = {2018}, language = {de} } @article{StapenhorstDutto2016, author = {Stapenhorst, Carolin and Dutto, Andrea Alberto}, title = {Notes on conceptual learning in architecture}, series = {Cartha - The Form of Form}, journal = {Cartha - The Form of Form}, address = {Basel}, year = {2016}, language = {en} } @book{StapenhorstMeerbach2019, author = {Stapenhorst, Carolin and Meerbach, Kerstin}, title = {Studie zur forschungsbezogenen Lehre an der Fakult{\"a}t f{\"u}r Architektur der RWTH Aachen}, publisher = {RWTH Aachen}, address = {Aachen}, doi = {10.18154/rWth-2019-06163}, pages = {140 Seiten}, year = {2019}, language = {de} } @incollection{Stapenhorst2020, author = {Stapenhorst, Carolin}, title = {Multidimensionale Arbeitsbl{\"a}tter}, series = {Artefakte des Entwerfens}, booktitle = {Artefakte des Entwerfens}, editor = {Lyngs{\o} Christensen, Rikke and Drach, Ekkerhard and Gasperoni, Lidia and Hallama, Doris and Hougaard, Anna Katrine and Liptau, Ralf}, publisher = {Universit{\"a}tsverlag der TU Berlin}, address = {Berlin}, isbn = {978-3-7983-3256-0}, issn = {2566-9656}, doi = {10.14279/depositonce-8508.2}, pages = {202 -- 224}, year = {2020}, abstract = {K{\"o}nnen wir Skizzenbl{\"a}tter, die gemischte Systeme von Text und Bildanteilen zeigen, als r{\"a}umliche und zeitliche Verdichtung von Reflexionsmilieus verstehen? Wie wirkt sich die durch die r{\"a}umliche Begrenzung des Blatts bedingte gleichzeitige Anwesenheit von Text und Bild aus, welche Wechselwirkungen entfalten sich? Diese Fragenstellungen f{\"u}hren zur Definition der ‚Multidimensionalen Arbeitsbl{\"a}tter', die als geeignetes Medium der Analyse von entwerferischen Denkprozessen verstanden werden. Anhand von f{\"u}nf Beispielen wird beschrieben, wie durch dekompositorische Prozeduren Zeichnungsgenealogien sichtbar gemacht werden k{\"o}nnen, die intensive Auskunft {\"u}ber Entwurfshandlungen geben.}, language = {de} } @inproceedings{MaurerSejdijaSander2024, author = {Maurer, Florian and Sejdija, Jonathan and Sander, Volker}, title = {Decentralized energy data storages through an Open Energy Database Server}, doi = {10.5281/zenodo.10607895}, pages = {5 Seiten}, year = {2024}, abstract = {In the research domain of energy informatics, the importance of open datais rising rapidly. This can be seen as various new public datasets are created andpublished. Unfortunately, in many cases, the data is not available under a permissivelicense corresponding to the FAIR principles, often lacking accessibility or reusability.Furthermore, the source format often differs from the desired data format or does notmeet the demands to be queried in an efficient way. To solve this on a small scale atoolbox for ETL-processes is provided to create a local energy data server with openaccess data from different valuable sources in a structured format. So while the sourcesitself do not fully comply with the FAIR principles, the provided unique toolbox allows foran efficient processing of the data as if the FAIR principles would be met. The energydata server currently includes information of power systems, weather data, networkfrequency data, European energy and gas data for demand and generation and more.However, a solution to the core problem - missing alignment to the FAIR principles - isstill needed for the National Research Data Infrastructure.}, language = {en} } @inproceedings{MaurerNitschKochemsetal.2024, author = {Maurer, Florian and Nitsch, Felix and Kochems, Johannes and Schimeczek, Christoph and Sander, Volker and Lehnhoff, Sebastian}, title = {Know your tools - a comparison of two open agent-based energy market models}, series = {2024 20th International Conference on the European Energy Market (EEM)}, booktitle = {2024 20th International Conference on the European Energy Market (EEM)}, publisher = {IEEE}, address = {New York, NY}, doi = {10.1109/EEM60825.2024.10609021}, pages = {8 Seiten}, year = {2024}, abstract = {Due to the transition to renewable energies, electricity markets need to be made fit for purpose. To enable the comparison of different energy market designs, modeling tools covering market actors and their heterogeneous behavior are needed. Agent-based models are ideally suited for this task. Such models can be used to simulate and analyze changes to market design or market mechanisms and their impact on market dynamics. In this paper, we conduct an evaluation and comparison of two actively developed open-source energy market simulation models. The two models, namely AMIRIS and ASSUME, are both designed to simulate future energy markets using an agent-based approach. The assessment encompasses modelling features and techniques, model performance, as well as a comparison of model results, which can serve as a blueprint for future comparative studies of simulation models. The main comparison dataset includes data of Germany in 2019 and simulates the Day-Ahead market and participating actors as individual agents. Both models are comparable close to the benchmark dataset with a MAE between 5.6 and 6.4 €/MWh while also modeling the actual dispatch realistically.}, language = {en} } @incollection{ChwallekGoezlerReichert2024, author = {Chwallek, Constanze and Goezler, Kaan and Reichert, Walter}, title = {Handling growth as a complexity driver at Faymonville}, series = {Hidden champions case compendium: Leading global markets - case studies and texts}, booktitle = {Hidden champions case compendium: Leading global markets - case studies and texts}, editor = {B{\"u}chler, Jan-Philipp and Hoon, Christina}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, isbn = {978-3-658-44300-9}, doi = {10.1007/978-3-658-44300-9_14}, pages = {209 -- 221}, year = {2024}, abstract = {The FAYMONVILLE case study describes how the family-owned company Faymonville from eastern Belgium has succeeded in becoming one of the leading manufacturers in its sector. The targeted identification of new markets, the focus on relevant customer needs, and a consistent product policy with a coordinated manufacturing concept lay the foundations for success. In this case study, students can learn about how a company can successfully resolve the fundamental contradiction between economic and customized production.}, language = {en} } @article{KohlKraemerFohryetal.2024, author = {Kohl, Philipp and Kr{\"a}mer, Yoka and Fohry, Claudia and Kraft, Bodo}, title = {Scoping review of active learning strategies and their evaluation environments for entity recognition tasks}, series = {Deep learning theory and applications}, journal = {Deep learning theory and applications}, editor = {Fred, Ana and Hadjali, Allel and Gusikhin, Oleg and Sansone, Carlo}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-66694-0 (online ISBN)}, doi = {10.1007/978-3-031-66694-0_6}, pages = {84 -- 106}, year = {2024}, abstract = {We conducted a scoping review for active learning in the domain of natural language processing (NLP), which we summarize in accordance with the PRISMA-ScR guidelines as follows: Objective: Identify active learning strategies that were proposed for entity recognition and their evaluation environments (datasets, metrics, hardware, execution time). Design: We used Scopus and ACM as our search engines. We compared the results with two literature surveys to assess the search quality. We included peer-reviewed English publications introducing or comparing active learning strategies for entity recognition. Results: We analyzed 62 relevant papers and identified 106 active learning strategies. We grouped them into three categories: exploitation-based (60x), exploration-based (14x), and hybrid strategies (32x). We found that all studies used the F1-score as an evaluation metric. Information about hardware (6x) and execution time (13x) was only occasionally included. The 62 papers used 57 different datasets to evaluate their respective strategies. Most datasets contained newspaper articles or biomedical/medical data. Our analysis revealed that 26 out of 57 datasets are publicly accessible. Conclusion: Numerous active learning strategies have been identified, along with significant open questions that still need to be addressed. Researchers and practitioners face difficulties when making data-driven decisions about which active learning strategy to adopt. Conducting comprehensive empirical comparisons using the evaluation environment proposed in this study could help establish best practices in the domain.}, language = {en} } @inproceedings{EggertSchwarz2024, author = {Eggert, Matthias and Schwarz, Jakob}, title = {What do enterprise collaboration systems afford to digital startups?}, series = {ECIS 2024 Proceedings}, booktitle = {ECIS 2024 Proceedings}, year = {2024}, abstract = {In recent years, more and more digital startups have been founded and many of them work remotely by applying enterprise collaboration systems (ECS). The study investigates the functional affordances of ECS, particularly Slack, and examines its potential as a virtual office environment for cultural development in digital startups. Through a case study and based on affordance theoretical considerations, the paper explores how ECS facilitates remote collaboration, communication, and socialization within digital startups. The findings comprise material properties of ECS (synchrony and asynchrony communication), functional affordances (virtual office and culture development affordances) as well as its realization (through communication practices, openness, and inter-company accessibility) and are conceptualized as a model for ECS affordances in digital startups.}, language = {en} } @article{StapenhorstDutto2020, author = {Stapenhorst, Carolin and Dutto, Andrea Alberto}, title = {Turin: Industriedenkmal wird Kulturzentrum wird Lazarett}, series = {Bauwelt}, volume = {111}, journal = {Bauwelt}, number = {13}, publisher = {Bauverlag BV}, address = {G{\"u}tersloh}, issn = {0005-6855}, pages = {56 -- 59}, year = {2020}, language = {de} } @incollection{EbertSchneiderStapenhorst2022, author = {Ebert, Carola and Schneider, Tatjana and Stapenhorst, Carolin}, title = {Undergraduate Research in Architecture}, series = {The Cambridge Handbook of Undergraduate Research}, booktitle = {The Cambridge Handbook of Undergraduate Research}, editor = {Mieg, Harald A. and Ambos, Elizabeth and Brew, Angela and Galli, Dominique and Lehmann, Judith}, publisher = {Cambridge University Press}, address = {Cambridge}, isbn = {9781108869508}, doi = {10.1017/9781108869508.049}, pages = {355 -- 362}, year = {2022}, abstract = {Architecture is a university subject with educational roots in both the technical university and art/specialized architecture schools, yet it lacks a strong research orientation and is focused on professional expertise. This chapter explores the particular role of research within architectural education in general by discussing two different cases for the implementation of undergraduate research in architecture: during the late 1990s and early 2000s at the University of Sheffield, UK, and during the 2010s at RWTH Aachen University, Germany. These examples illustrate the asynchronous beginnings of similar developments, and also contextualize differences in disciplinary habitus and pedagogical approaches between Sheffield, where research impulses stemmed from within the Architectural Humanities, and Aachen with its strong tradition as a technical university.}, language = {en} } @incollection{Stapenhorst2023, author = {Stapenhorst, Carolin}, title = {The didactic experimentation on housing modules for cycle travellers}, series = {MAACC. Modulo abitativo autosufficiente per cicloviaggiatori e camminatori.}, booktitle = {MAACC. Modulo abitativo autosufficiente per cicloviaggiatori e camminatori.}, editor = {Callegari, Guido and De Giorgi, Claudia and Occelli, Chiara L.M. and Palma, Riccardo}, publisher = {LetteraVentidue Edizioni Srl}, address = {Siracusa}, isbn = {978-88-6242-778-4}, pages = {40 -- 44}, year = {2023}, language = {en} } @inproceedings{YanStreseChwallek2018, author = {Yan, Zexiong and Strese, Steffen and Chwallek, Constanze}, title = {Explorer CEOs: The effect of CEO career variety on large firms' relative exploration orientation}, series = {G-Forum Jahreskonferenz 2018}, booktitle = {G-Forum Jahreskonferenz 2018}, pages = {42 Seiten}, year = {2018}, abstract = {Prior studies demonstrate that firms need to make smart trade-off decisions between exploration and exploitation activities in order to increase performance. Chief executive officers (CEOs) are principal decision makers of a firm's strategic posture. In this study, we theorize and empirically examine how relative exploration orientation of large publicly listed firms varies based on the career variety of their CEOs - that is, how diverse the professional experiences of executives were prior to them becoming CEOs. We further argue that the heterogeneity and structure of the top management team moderates the impact of CEO career variety on firms' relative exploration orientation. Based on multisource secondary data for 318 S\&P 500 firms from 2005 to 2015, we find that CEO career variety is positively associated with relative exploration orientation. Interestingly, CEOs with high career varieties appear to be less effective in pursuing exploration, when they work with highly heterogeneous and structurally interdependent top management teams.}, language = {en} } @inproceedings{HunsdiekChwallek2019, author = {Hunsdiek, Niklas J.A. and Chwallek, Constanze}, title = {External venturing activities and the influence of the chief technology officer}, series = {G-Forum Jahreskonferenz 2019}, booktitle = {G-Forum Jahreskonferenz 2019}, pages = {6 Seiten}, year = {2019}, language = {en} } @inproceedings{ChwallekMaassen2022, author = {Chwallek, Constanze and Maaßen, Franziska}, title = {Cure or blessing? The effect of (non-financial) signals on sustainable venture's funding success}, series = {G-Forum Jahreskonferenz 2022}, booktitle = {G-Forum Jahreskonferenz 2022}, pages = {7 Seiten}, year = {2022}, language = {en} } @article{MikuckiSchulerDigeletal.2023, author = {Mikucki, Jill Ann and Schuler, C. G. and Digel, Ilya and Kowalski, Julia and Tuttle, M. J. and Chua, Michelle and Davis, R. and Purcell, Alicia and Ghosh, D. and Francke, G. and Feldmann, M. and Espe, C. and Heinen, Dirk and Dachwald, Bernd and Clemens, Joachim and Lyons, W. B. and Tulaczyk, S.}, title = {Field-Based planetary protection operations for melt probes: validation of clean access into the blood falls, antarctica, englacial ecosystem}, series = {Astrobiology}, volume = {23}, journal = {Astrobiology}, number = {11}, publisher = {Liebert}, address = {New York, NY}, issn = {1557-8070 (online)}, doi = {10.1089/ast.2021.0102}, pages = {1165 -- 1178}, year = {2023}, abstract = {Subglacial environments on Earth offer important analogs to Ocean World targets in our solar system. These unique microbial ecosystems remain understudied due to the challenges of access through thick glacial ice (tens to hundreds of meters). Additionally, sub-ice collections must be conducted in a clean manner to ensure sample integrity for downstream microbiological and geochemical analyses. We describe the field-based cleaning of a melt probe that was used to collect brine samples from within a glacier conduit at Blood Falls, Antarctica, for geomicrobiological studies. We used a thermoelectric melting probe called the IceMole that was designed to be minimally invasive in that the logistical requirements in support of drilling operations were small and the probe could be cleaned, even in a remote field setting, so as to minimize potential contamination. In our study, the exterior bioburden on the IceMole was reduced to levels measured in most clean rooms, and below that of the ice surrounding our sampling target. Potential microbial contaminants were identified during the cleaning process; however, very few were detected in the final englacial sample collected with the IceMole and were present in extremely low abundances (∼0.063\% of 16S rRNA gene amplicon sequences). This cleaning protocol can help minimize contamination when working in remote field locations, support microbiological sampling of terrestrial subglacial environments using melting probes, and help inform planetary protection challenges for Ocean World analog mission concepts.}, language = {en} } @masterthesis{Vervekina2024, type = {Bachelor Thesis}, author = {Vervekina, Tatyana}, title = {Designing for Focus : ein Hilfsmittelsystem f{\"u}r Kinder mit AD(H)S}, publisher = {FH Aachen}, address = {Aachen}, pages = {113 Seiten}, year = {2024}, abstract = {Das Projekt widmet sich dem Thema der Aufmerksamkeitsdefizit-Hyperaktivit{\"a}tsst{\"o}rung (ADHS) und Aufmerksamkeitsdefizitst{\"o}rung (ADS) im Kindesalter. Es setzt sich dabei mit den t{\"a}glichen Herausforderungen auseinander, mit denen diese Kinder sowohl im Lernprozess als auch in der famili{\"a}ren Beziehungsdynamik konfrontiert sind. Der entwickelte Konzentrationsbegleiter und das dazugeh{\"o}rige Set basieren auf einer lerntherapeutischen Idee, die ein Gleichgewicht zwischen Konzentration und Entspannung erschafft. Das Gesamtsystem „MonKo" bietet mit dem Konzentrationsbegleiter Unterst{\"u}tzung bei der Alltagsplanung, Priorisierung von Aufgaben und dem Umgang mit Reizen. Der Entspannungsteil des Sets pr{\"a}sentiert sich als „Schatzkiste" mit sensorischen Spielzeugen und ist individuell von Therapeut:innen und Lehrkr{\"a}ften an die Bed{\"u}rfnisse der Kinder anpassbar. Der Konzentrationsbegleiter in der Optik eines liebevollen Monsters soll den Kindern helfen, mit den Herausforderungen neuroatypischen Verhaltens umzugehen und erfolgreich in Schule und Alltag zu sein.}, language = {de} } @masterthesis{vanderBeek2024, type = {Bachelor Thesis}, author = {van der Beek, Lucas}, title = {PRO+SOUND : Kombinationsprodukt bestehend aus Lautsprecher und Projektor}, publisher = {FH Aachen}, address = {Aachen}, pages = {105 Seiten}, year = {2024}, abstract = {PRO+SOUND ist ein tragbares Kombinationsprodukt, bestehend aus Lautsprecher und Projektor, das sowohl privat zum streamen von Filmen, Serien, Musik und Videospielen als auch professionell als Pr{\"a}sentationsger{\"a}t in H{\"o}rs{\"a}len und Konferenzr{\"a}umen genutzt werden kann. Projektoren und Beamer sind groß, schwer, unhandlich und nicht mehr zeitgem{\"a}ß. Die Bedienung der meisten Beamer ist veraltet und kaum digitalisiert. PRO+SOUND l{\"o}st diese Schwachstellen in einem kompakten Produkt und macht das streamen von Inhalten m{\"u}helos und kabellos. Das geringe Gewicht und der kompakte Formfaktor macht die Mitnahme f{\"u}r unterwegs problemlos m{\"o}glich.}, language = {de} } @masterthesis{Spindler2024, type = {Bachelor Thesis}, author = {Spindler, David}, title = {OneHold : mietbares modulares Produktsystem f{\"u}r Haushaltsger{\"a}te bei tempor{\"a}rem Wohnen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {129 Seiten}, year = {2024}, abstract = {OneHold ist ein kompaktes Produktsystem, welches durch die Nutzung von Modularit{\"a}t Multifunktionalit{\"a}t erreicht, und so Mehrwert bietet, indem es die grundlegenden Aufgaben im Haushalt mit weniger ben{\"o}tigten Komponenten bew{\"a}ltigt. So werden Teile, Raum, Kosten und Ressourcen gespart. OneHold kann in Form von mehreren Modulen flexibel gemietet werden, um die Bed{\"u}rfnisse tempor{\"a}r wohnender Menschen passgenau zu bedienen. Die Power-Einheit mit Elektromotor und Akku wird mit jeweils einem Modul f{\"u}r die zu bew{\"a}ltigende Haushaltsaufgabe verbunden. In dieser Bachelorarbeit wurden neben der Power-Einheit vier Module gestaltet: Staubsauger, Mixer, P{\"u}rierstab, und Akkuschrauber. Das Design von OneHold zelebriert die Achse mit rotierender Funktion als formgebenden Kern des Produkts. Die dynamisch gestreckte zylindrische Form verleiht jeder Modulkonfiguration des Produktsystems ein einheitliches Aussehen.}, language = {de} } @masterthesis{Raabe2024, type = {Bachelor Thesis}, author = {Raabe, Jonas Leander}, title = {caff{\´e} eccezionale for la marzocco : Interiordesign eines Showrooms in K{\"o}ln}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {111 Seiten}, year = {2024}, abstract = {In dem Projekt „caff{\´e} eccezionale for la marzocco" wurde sich mit der Gestaltung eines interaktiven Showrooms f{\"u}r die renommierte Kaffeemaschinenmarke „La Marzocco" auseinandergesetzt. Dieser Showroom befindet sich im Belgischen Viertel in K{\"o}ln und bietet einen einzigartigen Einblick in die Welt des Espressos. Die Zielsetzung: nicht nur die Leidenschaft f{\"u}r Kaffee und sein pr{\"a}zises Handwerk zu teilen, sondern auch auf die dringende Notwendigkeit hinzuweisen, nachhaltige Praktiken im Kaffeeanbau zu f{\"o}rdern. Durch die einzigartige Gestaltung des Showrooms wurde eine Atmosph{\"a}re geschaffen, die Besucher:innen erm{\"o}glicht, die Marke sinnlich zu entdecken und kennenzulernen. Er fungiert nicht nur als Ausstellungsraum f{\"u}r Kaffeemaschinen, sondern auch als Plattform, die die Besuche:innen auf eine interaktive Erlebnisreise durch die Welt des Kaffees f{\"u}hrt.}, language = {de} } @masterthesis{Pilath2024, type = {Bachelor Thesis}, author = {Pilath, Dominik}, title = {Optimierte Schnittmuster in Kleinunternehmen : Konzept zur Branchenverschiebung in der Modeindustrie}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {55 Seiten}, year = {2024}, abstract = {Die vorliegende Arbeit widmet sich Herangehensweisen, die dem Fast-Fashion-Ph{\"a}nomen - einem Trend in der Bekleidungsindustrie, der sich durch immer schnellere Produktion, k{\"u}rzere Produktlebenszyklen und kosteng{\"u}nstigere Massenproduktion auszeichnet, entgegenstehen. Die alternative Herangehensweise orientiert sich am Berufsbild des Maßschneiders. Ein Lasercutter, der f{\"u}r den Arbeitsalltag von Kleinunternehmen in der Kleidungsbranche optimiert ist, {\"u}bernimmt das Ausschneiden von Schnittmustern auf Stoffen. Dies erm{\"o}glicht Unternehmen in der digitalisierten Welt konkurrenzf{\"a}hig zu bleiben, ohne große Aufr{\"u}stungsarbeiten.}, language = {de} } @masterthesis{Koch2024, type = {Bachelor Thesis}, author = {Koch, Ansgar}, title = {Cyberslides : 3D-Printed Footwear}, publisher = {FH Aachen}, address = {Aachen}, pages = {34 Seiten}, year = {2024}, abstract = {Das Projekt Cyberslides zeigt auf, wie freischaffende Designer:innen und konsumbewusste Verbraucher:innen von 3D-Druck und dezentralisierter Produktion profitieren k{\"o}nnen}, language = {de} } @masterthesis{Hucke2024, type = {Bachelor Thesis}, author = {Hucke, Luka}, title = {Einzel-Fahrer:innen F{\"u}hrerhaus : effiziente Raumnutzung in LKW-Fahrerkabinen, optimiert f{\"u}r die Fahrer:innen}, publisher = {FH Aachen}, address = {Aachen}, pages = {89 Seiten}, year = {2024}, abstract = {Die Arbeit widmet sich der Ursprungsanalyse des Fahrer:innenmangels und pr{\"a}sentiert einen L{\"o}sungsansatz durch die Entwicklung einer neu gestalteten Fahrkabine f{\"u}r Lastkraftwagen. Hierbei ber{\"u}cksichtigt das Projekt sowohl die Bed{\"u}rfnisse der Fahrer:innen als auch die Anforderungen der Unternehmer:innen, um den Anforderungen der zuk{\"u}nftigen Generation gerecht zu werden. Die Rolle der Berufskraftfahrer:innen wird sich wandeln, wobei die Aufgaben {\"u}ber das reine F{\"u}hren eines Fahrzeugs hinausgehen. Diese Ver{\"a}nderungen erfordern auch Anpassungen an der Arbeitsumgebung, insbesondere an der Fahrkabine, um das Arbeiten, Wohnen und Schlafen auf begrenztem Raum zu erm{\"o}glichen. M{\"o}glich durch neue Technologien, Richtlinien und neue Herangehensweisen geht der „SOLODRIVER" in den Themen Design und Raumnutzung neue Wege und zeigt damit was in Zukunft m{\"o}glich ist.}, language = {de} } @masterthesis{Maden2024, type = {Bachelor Thesis}, author = {Maden, Seda}, title = {Cape Town : revisiting the Past}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {92 Seiten}, year = {2024}, abstract = {Die Arbeit „Cape Town - Revisiting the Past" setzt sich mit der Vergangenheit von Kapstadt auseinander. Kapstadt ist gepr{\"a}gt von einer beeindruckenden Geografie, Kultur, der Vergangenheit und den Menschen. Eine pers{\"o}nliche Verbindung nach Kapstadt und ein Familienarchiv aus aufbewahrten Publikationen, Postkarten und Fotos erm{\"o}glichen einen Blick in die vergangene Zeit. Verschiedene Materialien aus unterschiedlichen Zeiten werden verbunden und in einen gemeinsamen Kontext gebracht. Unabh{\"a}ngig davon, ob dies der erste Kontakt mit Kapstadt ist oder man den Ort bereits kennt, k{\"o}nnen Dinge neu entdeckt oder wiederentdeckt werden. Die Publikation schafft es mithilfe von Materialien und pers{\"o}nlichen Erinnerungen einen visuellen und informativen Einblick in das damalige Kapstadt zu geben. Dabei wird die Vielfalt der Region gezeigt und ein Gef{\"u}hl eines Lebens vor Ort vermittelt.}, language = {de} } @masterthesis{Meisenberg2024, type = {Bachelor Thesis}, author = {Meisenberg, Anna}, title = {Biodiversit{\"a}t mittels Urban Gardening : eine interaktive Applikation f{\"u}r Pflanzen- und Insektenschutz}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {112 Seiten}, year = {2024}, abstract = {In den vergangenen Jahrzehnten hat sich der R{\"u}ckgang der biologischen Vielfalt aufgrund menschlicher Aktivit{\"a}ten dramatisch beschleunigt. Die dramatische Abnahme wirkt sich enorm auf unsere allgemeine Nahrungsversorgung und die Gesundheit unseres Planeten aus. Das Ziel von „Bloomi" ist es, den Nutzer {\"u}ber die Wichtigkeit der Biodiversit{\"a}t aufzukl{\"a}ren und zur Schaffung von essenziellen Lebensr{\"a}umen f{\"u}r die Arten anzuregen. Der Fokus liegt dabei auf der Gestaltung und Pflege von insekten-, tier- und pflanzenfreundlichen G{\"a}rten, Balkonen und st{\"a}dtischen Freifl{\"a}chen. „Bloomi" bietet dazu umfassende Informationen und Anleitungen. Außerdem kann der Nutzer nicht nur alleine, sondern auch in der Gemeinschaft g{\"a}rtnern und sich {\"u}ber die Plattform organisieren, austauschen und inspirieren lassen.}, language = {de} } @masterthesis{Moskaleva2024, type = {Bachelor Thesis}, author = {Moskaleva, Elizaveta}, title = {Identity : inside a simulation}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {201 Seiten}, year = {2024}, abstract = {Das Bachelorprojekt „Identity, Inside a Simulation" ist eine experimentelle, fotografische Auseinandersetzung mit dem Thema Identit{\"a}t. In einer sich st{\"a}ndig weiter digitalisierenden Welt werden neue Arten der Kommunikation, auch zwischen Mensch und Maschine, erm{\"o}glicht. Diese lassen die Grenzen zwischen Realit{\"a}t und Simulation verschwimmen. In diesem Projekt ist die moderne Frage nach Identit{\"a}t mit dem aktuellen Mittel KI auf neue Darstellungsm{\"o}glichkeiten analysiert worden. Eine Arbeit, die der Frage nachgeht, wie Identit{\"a}t innerhalb einer simulierten Welt verstanden werden kann. Dabei werden Parallelen zu der realen Welt aufgewiesen. Visuell er{\"o}ffnet die Ausstellung eine neue Sichtweise f{\"u}r die Nutzung aktueller Technologien und das Verst{\"a}ndnis von der eigenen Identit{\"a}t.}, language = {de} } @masterthesis{Platzen2024, type = {Bachelor Thesis}, author = {Platzen, Nicolai}, title = {Blue in Green}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {171 Seiten}, year = {2024}, abstract = {Portr{\"a}ts sind allgegenw{\"a}rtig und begegnen uns t{\"a}glich in den verschiedensten Formen und an den verschiedensten Orten. Sie sind zu einem nicht unbedeutenden Aspekt unseres kulturellen und sozialen Lebens geworden. Die Fotografie verspricht dabei eine unverf{\"a}lschte Wiedergabe der Realit{\"a}t. Das Portr{\"a}t fungiert an vielen Stellen sogar als Stellvertreter der abgebildeten Person. Es entsteht eine gewisse parasoziale Vertrautheit zur Abbildung. Allerdings birgt der Prozess des Portr{\"a}tierens zahlreiche Herausforderungen und Beschr{\"a}nkungen: St{\"o}rfaktoren, technischer sowie psychologischer Natur, beeinflussen die Diskrepanz zwischen einer Person und ihrer Abbildung erheblich. „Blue in Green" ist ein installativer Raum, welcher die Rezipient*innen mit besagten St{\"o}rfaktoren konfrontiert, die Vertrautheit mit der Abbildung bricht und so zu einer Auseinandersetzung mit Portr{\"a}ts aus m{\"o}glichst vielen verschiedenen Perspektiven provoziert.}, language = {de} } @masterthesis{Schneide2024, type = {Bachelor Thesis}, author = {Schneide, Mirijana}, title = {Grimms Kram : Illustrative Neuinterpretation sieben traditioneller Grimm M{\"a}rchen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {227 Seiten}, year = {2024}, abstract = {Inhalt dieses Projektes ist die visuelle Neuinterpretation sieben traditioneller Grimm M{\"a}rchen. Der Fokus liegt auf den Illustrationen, welche von den entsprechenden bestehenden Textinhalten separat begleitet werden. Dem gew{\"a}hlten Illustrationsstil „Pixel-Art" liegt die Intention zugrunde, g{\"a}ngige Darstellungsformen des M{\"a}rchen-Genres aufzubrechen: visuell wird sich bewusst auf das beschr{\"a}nkte Aufl{\"o}sungsverm{\"o}gen von Bildschirmen bezogen. Aufgrund des digitalen Illustrierens wird dies als Stilmittel eingesetzt. Die digitale Darstellungsform wird durch den Druckprozess der Medien in den physischen Raum {\"u}bertragen und so erlebbar gemacht.}, language = {de} } @masterthesis{Stein2024, type = {Bachelor Thesis}, author = {Stein, Hannah}, title = {Tr{\"a}ume hoch, klein Dani!}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {120 Seiten}, year = {2024}, abstract = {"Tr{\"a}ume hoch, klein Dani!" ist ein Pappkinderbuch mit Schieb- und Drehfunktionen f{\"u}r Kinder ab 3 Jahren. Diese Bachelorarbeit beinhaltet das Schreiben einer Kindergeschichte, das Gestalten der Illustrationen, das Konzeptionieren der interaktiven Funktionen und das Binden und Bauen des Buches. Gut gestaltete Kinderb{\"u}cher spielen eine entscheidende Rolle bei der Entwicklung von Kindern. Kinderb{\"u}cher f{\"o}rdern die Sprachentwicklung, unterst{\"u}tzen kritisches Denken, lehren wichtige Werte und Moral, beg{\"u}nstigen das Lernen der Grundlagen des Lesens und Schreibens und regen die Kreativit{\"a}t an. Pappb{\"u}cher mit zus{\"a}tzlichen interaktiven Funktionen trainieren die Hand- und Augenkoordination und damit die motorischen F{\"a}higkeiten des Kindes. Ziel war es, ein Pappkinderbuch f{\"u}r junge Kinder zu gestalten, das Jung und Alt begeistert und Spaß bereitet.}, language = {de} } @masterthesis{Terry2024, type = {Bachelor Thesis}, author = {Terry, Aileen}, title = {Deutsche Parkinson Gesellschaft : Entwicklung eines neuen Erscheinungsbildes f{\"u}r die Deutsche Parkinson Gesellschaft zur F{\"o}rderung des Bewusstseins f{\"u}r die Krankheit}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {174 Seiten}, year = {2024}, abstract = {Mehr als 400.000 Menschen in Deutschland sind von Parkinson betroffen, dennoch bleibt diese neurodegenerative Krankheit oft im Schatten anderer Erkrankungen. Diese Bachelorarbeit beleuchtet die Unsichtbarkeit von Parkinson im {\"o}ffentlichen Raum und setzt sich f{\"u}r eine breitere Aufkl{\"a}rung ein. Durch ein neues Corporate Design der Deutschen Parkinson Gesellschaft sowie begleitende Maßnahmen wird angestrebt, Informationen {\"u}ber die Krankheit zu verbreiten und Einblicke in die Lebensumst{\"a}nde der Betroffenen zu gew{\"a}hren. Dies tr{\"a}gt nicht nur zu einer fr{\"u}hzeitigen Diagnosestellung bei, sondern erm{\"o}glicht auch eine verbesserte Unterst{\"u}tzung f{\"u}r Patient:innen und ihre Angeh{\"o}rigen. Ein Aufruf, gemeinsam mit den Betroffenen Vorurteile zu {\"u}berwinden und Parkinson sichtbar zu machen. Mit dem Ziel Parkinson irgendwann heilem zu k{\"o}nnen.}, language = {de} } @masterthesis{Tiller2024, type = {Bachelor Thesis}, author = {Tiller, Alicia}, title = {Die G{\"o}ttin in dir : Arbeitsbuch zu den weiblichen Rhythmen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {123 Seiten}, year = {2024}, abstract = {Was verbindet der Mond, die Jahreszeiten und das Weibliche dieser Erde? Das sich immerfort drehende Rad der Zyklen. In vergangenen Zeiten nutzten Frauen den Menstruationszyklus und die Weisheit der Natur als Quelle der Kraft - f{\"u}r kreative, emotionale, geistige und k{\"o}rperliche F{\"u}hrung durch das Leben. Dieses alte Wissen ist noch heute durch Geschichten und Mythen unserer Welt erfahrbar. Das Arbeitsbuch „Die G{\"o}ttin in dir" begleitet Leser:innen auf diesen Spuren durch die Welten der Zyklen und Rhythmen aus der Kulturhistorie, Biologie und dem indigenen Wissen. Die Ebene der Selbstreflexion in diesem Buch bietet dabei eine aktive Methode, die Nutzer:innen dazu bef{\"a}higt, in die Umsetzung zu gehen und den Prozess der zyklischen Reise der Natur zu begleiten. Das Konzept des Buches zielt darauf ab, eine Verbindung zwischen der Selbsterfahrung im Kontext weiblicher Archetypen, dem Menstruationszyklus, nat{\"u}rlichen Rhythmen und ethnologischen Techniken herzustellen. Die Absicht ist es, die individuelle Erfahrung jeder Frau zu st{\"a}rken, das Selbstvertrauen zu f{\"o}rdern und den Mut zur Vielfalt zu aktivieren. Es geht darum, unsere angeborene, instinktive Natur in uns wieder zu erwecken. Die Stimme der G{\"o}ttin fl{\"u}stert uns zu und ruft ihre T{\"o}chter. Denn die Melodie, die in dir erklingt, m{\"o}chte geh{\"o}rt werden.}, language = {de} } @article{AkimbekovDigelTastambeketal.2024, author = {Akimbekov, Nuraly S. and Digel, Ilya and Tastambek, Kuanysh T. and Kozhahmetova, Marzhan and Sherelkhan, Dinara K. and Tauanov, Zhandos}, title = {Hydrogenotrophic methanogenesis in coal-bearing environments: Methane production, carbon sequestration, and hydrogen availability}, series = {International Journal of Hydrogen Energy}, volume = {52}, journal = {International Journal of Hydrogen Energy}, number = {Part D}, publisher = {Elsevier}, address = {New York}, issn = {1879-3487 (online)}, doi = {10.1016/j.ijhydene.2023.09.223}, pages = {1264 -- 1277}, year = {2024}, abstract = {Methane is a valuable energy source helping to mitigate the growing energy demand worldwide. However, as a potent greenhouse gas, it has also gained additional attention due to its environmental impacts. The biological production of methane is performed primarily hydrogenotrophically from H2 and CO2 by methanogenic archaea. Hydrogenotrophic methanogenesis also represents a great interest with respect to carbon re-cycling and H2 storage. The most significant carbon source, extremely rich in complex organic matter for microbial degradation and biogenic methane production, is coal. Although interest in enhanced microbial coalbed methane production is continuously increasing globally, limited knowledge exists regarding the exact origins of the coalbed methane and the associated microbial communities, including hydrogenotrophic methanogens. Here, we give an overview of hydrogenotrophic methanogens in coal beds and related environments in terms of their energy production mechanisms, unique metabolic pathways, and associated ecological functions.}, language = {en} } @article{WindmuellerSchapsZantisetal.2024, author = {Windm{\"u}ller, Anna and Schaps, Kristian and Zantis, Frederik and Domgans, Anna and Taklu, Bereket Woldegbreal and Yang, Tingting and Tsai, Chih-Long and Schierholz, Roland and Yu, Shicheng and Kungl, Hans and Tempel, Hermann and Dunin-Borkowski, Rafal E. and H{\"u}ning, Felix and Hwang, Bing Joe and Eichel, R{\"u}diger-A.}, title = {Electrochemical activation of LiGaO2: implications for ga-doped garnet solid electrolytes in li-metal batteries}, series = {ACS Applied Materials \& Interfaces}, volume = {16}, journal = {ACS Applied Materials \& Interfaces}, number = {30}, publisher = {ACS Publications}, address = {Washington, DC}, issn = {39181-3919}, doi = {10.1021/acsami.4c03729}, pages = {14 Seiten}, year = {2024}, abstract = {Ga-doped Li7La3Zr2O12 garnet solid electrolytes exhibit the highest Li-ion conductivities among the oxide-type garnet-structured solid electrolytes, but instabilities toward Li metal hamper their practical application. The instabilities have been assigned to direct chemical reactions between LiGaO2 coexisting phases and Li metal by several groups previously. Yet, the understanding of the role of LiGaO2 in the electrochemical cell and its electrochemical properties is still lacking. Here, we are investigating the electrochemical properties of LiGaO2 through electrochemical tests in galvanostatic cells versus Li metal and complementary ex situ studies via confocal Raman microscopy, quantitative phase analysis based on powder X-ray diffraction, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and electron energy loss spectroscopy. The results demonstrate considerable and surprising electrochemical activity, with high reversibility. A three-stage reaction mechanism is derived, including reversible electrochemical reactions that lead to the formation of highly electronically conducting products. The results have considerable implications for the use of Ga-doped Li7La3Zr2O12 electrolytes in all-solid-state Li-metal battery applications and raise the need for advanced materials engineering to realize Ga-doped Li7La3Zr2O12for practical use.}, language = {en} } @article{EichlerBalcBremenetal.2024, author = {Eichler, Fabian and Balc, Nicolae and Bremen, Sebastian and Nink, Philipp}, title = {Investigation of laser powder bed fusion parameters with respect to their influence on the thermal conductivity of 316L samples}, series = {Journal of Manufacturing and Materials Processing}, volume = {8}, journal = {Journal of Manufacturing and Materials Processing}, number = {4}, publisher = {MDPI}, address = {Basel}, issn = {2504-4494}, doi = {10.3390/jmmp8040166}, pages = {12 Seiten}, year = {2024}, abstract = {The thermal conductivity of components manufactured using Laser Powder Bed Fusion (LPBF), also called Selective Laser Melting (SLM), plays an important role in their processing. Not only does a reduced thermal conductivity cause residual stresses during the process, but it also makes subsequent processes such as the welding of LPBF components more difficult. This article uses 316L stainless steel samples to investigate whether and to what extent the thermal conductivity of specimens can be influenced by different LPBF parameters. To this end, samples are set up using different parameters, orientations, and powder conditions and measured by a heat flow meter using stationary analysis. The heat flow meter set-up used in this study achieves good reproducibility and high measurement accuracy, so that comparative measurements between the various LPBF influencing factors to be tested are possible. In summary, the series of measurements show that the residual porosity of the components has the greatest influence on conductivity. The degradation of the powder due to increased recycling also appears to be detectable. The build-up direction shows no detectable effect in the measurement series.}, language = {en} } @article{ZhantlessovaSavitskayaKistaubayevaetal.2024, author = {Zhantlessova, Sirina and Savitskaya, Irina and Kistaubayeva, Aida and Ignatova, Ludmila and Talipova, Aizhan and Pogrebnjak, Alexander and Digel, Ilya}, title = {Correction: Zhantlessova et al. advanced "Green" prebiotic composite of bacterial cellulose/pullulan based on synthetic biology-powered microbial coculture strategy. Polymers 2022, 14, 3224}, series = {Polymers}, volume = {16}, journal = {Polymers}, number = {13}, publisher = {MDPI}, address = {Basel}, issn = {2073-4360}, doi = {10.3390/polym16131802}, pages = {2 Seiten}, year = {2024}, language = {en} } @inproceedings{DachwaldOhndorfSpurmannetal.2009, author = {Dachwald, Bernd and Ohndorf, Andreas and Spurmann, J. and Loeb, H. W. and Schartner, Karl-Heinz and Seboldt, Wolfgang}, title = {Mission design for a SEP mission to saturn}, series = {60th International Astronautical Congress 2009 (IAC 2009)}, booktitle = {60th International Astronautical Congress 2009 (IAC 2009)}, publisher = {Curran Associates, Inc.}, address = {Red Hook, NY}, isbn = {978-1-61567-908-9}, pages = {11 Seiten}, year = {2009}, abstract = {Within ESA's Cosmic Vision 2015-2025 plan, a mission to explore the Saturnian System, with special emphasis on its two moons Titan and Enceladus, was selected for study, termed TANDEM (Titan and Enceladus Mission). In this paper, we describe an optimized mission design for a TANDEM-derived solar electric propulsion (SEP) mission. We have chosen the SEP mission scenario for the interplanetary transfer of the TANDEM spacecraft because all feasible gravity assist sequences for a chemical transfer between 2015 and 2025 result in long flight times of about nine years. Our SEP system is based on the German RIT ion engine. For our optimized mission design, we have extensively explored the SEP parameter space (specific impulse, thrust level, power level) and have calculated an optimal interplanetary trajectory for each setting. In contrast to the original TANDEM mission concept, which intends to use two launch vehicles and an all-chemical transfer, our SEP mission design requires only a single Ariane 5 ECA launch for the same payload mass. Without gravity assist, it yields a faster and more flexible transfer with a fight time of less than seven years, and an increased payload ratio. Our mission design proves thereby the capability of SEP even for missions into the outer solar system.}, language = {en} } @incollection{AtmaneHirechKassmietal.2020, author = {Atmane, Ilias and Hirech, Kamal and Kassmi, K. and Mahdi, Zahra and Alexopoulos, Spiros and Schwarzer, Klemens and Chayeb, H. and Bachiri, N.}, title = {Design and realization of a pilot solar desalination plant in Douar El Hamri in the province of Berkane (Morocco)}, series = {Sustainable entrepreneurship, renewable energy-based projects, and digitalization}, booktitle = {Sustainable entrepreneurship, renewable energy-based projects, and digitalization}, editor = {Omrane, Amina and Kassmi, Khalil and Akram, Muhammad Wasim and Khanna, Ashish and Mostafiz, Imtiaz}, publisher = {CRC Press}, address = {Boca Raton, Fa.}, isbn = {9781000292541 (E-Book)}, pages = {18 Seiten}, year = {2020}, abstract = {Producing fresh water from saline water has become one of the most difficult challenges to overcome especially with the high demand and shortage of fresh water. In this context, as part of a collaboration with Germany, the authors propose a design and implementation of a pilot multi-stage solar desalination system (MSD), remotely controlled, at Douar Al Hamri in the rural town of Boughriba in the province of Berkane, Morocco. More specifically, they present their contribution on the remote control and supervision system, which makes the functioning of the MSD system reliable and guarantees the production of drinking water for the population of Douar. The results obtained show that the electronic cards and computer communication software implemented allow the acquisition of all electrical (currents, voltages, powers, yields), thermal (temperatures of each stage), and meteorological (irradiance and ambient temperature), remote control and maintenance (switching on, off, data transfer). By comparing with the literature carried out in the field of solar energy, the authors conclude that the MSD and electronic desalination systems realized during this work represent a contribution in terms of the reliability and durability of providing drinking water in rural and urban areas.}, language = {en} } @masterthesis{Naujoks2024, type = {Bachelor Thesis}, author = {Naujoks, Christian}, title = {Tracking healthy habits : Digitale Anwendung zur F{\"o}rderung von gesunder Ern{\"a}hrung und Verhalten}, publisher = {FH Aachen}, address = {Aachen}, pages = {293 Seiten}, year = {2024}, abstract = {"Tracking healthy habits" ist eine App, die darauf abzielt, ges{\"u}ndere Essgewohnheiten und mehr Bewegung zu f{\"o}rdern, indem sie verschiedene messbare Metriken erfasst. Die Anwendung legt einen besonderen Schwerpunkt auf das Verfolgen von Kalorien, um Nutzer:innen dabei zu helfen, ihre t{\"a}gliche Kalorienaufnahme zu kontrollieren und ein besseres Verst{\"a}ndnis f{\"u}r Lebensmittel zu entwickeln. Ein {\"u}berm{\"a}ßiger Konsum ungesunder Lebensmittel und Bewegungsmangel k{\"o}nnen sich negativ auf den geistigen und k{\"o}rperlichen Zustand auswirken. Daher unterst{\"u}tzt diese App Nutzer:innen dabei, ges{\"u}ndere Gewohnheiten zu entwickeln und Disziplin zu f{\"o}rdern. Die Hauptziele von "Tracking Healthy Habits" sind die F{\"o}rderung ges{\"u}nderer Essgewohnheiten, die Unterst{\"u}tzung langfristiger Verhaltens{\"a}nderungen durch kontinuierliches Monitoring und die Verbesserung der k{\"o}rperlichen sowie geistigen Gesundheit.}, language = {de} } @masterthesis{Plevako2024, type = {Bachelor Thesis}, author = {Plevako, Ludmilla}, title = {Ekatharina : Leben in der Trudarmee}, publisher = {FH Aachen}, address = {Aachen}, pages = {59 Seiten}, year = {2024}, abstract = {Harte Arbeit, Hunger, Unterk{\"u}hlung und Ungewissheit - dies war der normale Alltag der Trudarmee im 2. Weltkrieg. Ekatharina, eine deutsche Sowjetb{\"u}rgerin, wurde wie viele andere gegen ihren Willen in diese Armee eingezogen. Die Bachelorarbeit „Ekatharina - Leben in der Trudarmee" behandelt den Lebensabschnitt einer {\"U}berlebenden, der Urgroßmutter der Autorin, in Form eines Graphic Novels. In der Trudarmee, auch Arbeitsarmee genannt, musste sie unter schweren Bedingungen Zwangsarbeit verrichten, wie arbeiten in der Schmiede, B{\"a}ume f{\"a}llen oder St{\"a}mme schleppen. Das Projekt soll nicht nur die Erinnerungen und das kulturelle Gut bewahren, es soll auch die Familiengeschichte erforschen, die Vergangenheit verst{\"a}ndlich gestalten und die beteiligten Personen in Ehren halten.}, language = {de} } @masterthesis{Wiese2024, type = {Bachelor Thesis}, author = {Wiese, Katharina}, title = {Drink me}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {39 Seiten}, year = {2024}, abstract = {„Drink me" ist ein Kurzfilm {\"u}ber drei Freunde auf einer Party, auf der ein mysteri{\"o}ses Getr{\"a}nk verteilt wird, das die Partyg{\"a}ste in einen besonderen Rausch versetzt. Die Farben fangen an zu leuchten, die Musik wird klarer, alles f{\"u}hlt sich intensiver an. Bis sich die Wahrnehmung der Protagonistin Ally pl{\"o}tzlich ver{\"a}ndert: Vom bunt leuchtenden Rauschzustand zur scheinbaren Realit{\"a}t: Einem grauen, kalten Bunker voller abgewrackter Gestalten. Ally versucht die Party zu verlassen, doch w{\"a}hrend ihre Wahrnehmungen immer weiter verschwimmen, verliert sie gleichzeitig allm{\"a}hlich ihr Bewusstsein. Der Film bietet durch die Darstellung der verschiedenen Wahrnehmungszust{\"a}nde und das Verschwimmen derer ein visuell besonders spannendes Erlebnis.}, language = {de} } @masterthesis{Zeyen2024, type = {Bachelor Thesis}, author = {Zeyen, Kim}, title = {Seeds : Konzeption und Gestaltung eines Toolkits f{\"u}r die Entwicklung nachhaltiger Webdesigns}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {197 Seiten}, year = {2024}, abstract = {Die Menschheit lebt {\"u}ber ihre Verhältnisse: Permanent {\"u}bersteigt unser Verbrauch die uns j{\"a}hrlich zur Verf{\"u}gung stehenden Ressourcen. Der Energiebedarf digitaler Anwendungen wird dabei meist unterschätzt. Wie Interaction-Designer:innen einen Beitrag zur Entwicklung nachhaltiger Websites leisten können, ist aktuell nur durch aufwendige Recherche zu beantworten. Die Bachelorarbeit »Seeds« stellt einen Schritt im Prozess zu mehr Nachhaltigkeit dar. Sie umfasst ein Toolkit, bestehend aus einer Website und einem Plugin f{\"u}r g{\"a}ngige Designtools. Dieses b{\"u}ndelt alle Informationen, um das Internet barriereärmer, sozialer, ethischer und eben auch ökologisch verträglicher zu gestalten. W{\"a}hrend die Website eine Anlaufstelle f{\"u}r den Wissensaufbau darstellt, unterst{\"u}tzt das Plugin bei der Entwicklung eigener Designs, ohne dass Gestalter:innen den Designprozess verlassen m{\"u}ssen.}, language = {de} } @masterthesis{Bonsu2024, type = {Bachelor Thesis}, author = {Bonsu, Joel}, title = {HypnoStress : Implementierung eines Stressmanagement-Controllers f{\"u}r den schulischen Alltag in der Grundschule.}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {145 Seiten}, year = {2024}, abstract = {In der heutigen Welt sind Kinder in zunehmendem Maße Stress aus verschiedenen Quellen wie schulischen Anforderungen, famili{\"a}rem Druck und ungewohnten Situationen ausgesetzt. Dieser Aspekt wird von vielen Erwachsenen oft vernachl{\"a}ssigt. Das kann dazu f{\"u}hren, dass sich bei Kindern Frustration und {\"A}rger aufstauen. Insbesondere das schulische Umfeld stellt ein erhebliches Stresspotenzial dar, da von den Kindern hohe Leistungen erwartet werden. Leistungsdruck, soziale Erwartungen und Frustration tragen zu diesem Eindruck bei. Auch der Unterricht bildet da keine Ausnahme und ist aufgrund seiner zentralen Bedeutung eine potenzielle Stressquelle. Als spezialisierter Begleiter bietet HypnoStress den Kindern die M{\"o}glichkeit, mit hypnosebasierten Techniken die Stressoren des Alltags zu bew{\"a}ltigen und sich auf neue Herausforderungen vorzubereiten.}, language = {de} } @masterthesis{Esser2024, type = {Bachelor Thesis}, author = {Esser, Julius}, title = {Ecosystems : Neuinterpretation von Elementen der Savanne zu Objekten zwischen Kunst und Design.}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {390 Seiten}, year = {2024}, abstract = {Das Projekt „Ecosystems" (deutsch {\"O}kosysteme) beschreibt die zusammenh{\"a}ngende Entwicklung eines Produktsystems, inspiriert von einzelnen Elementen der afrikanischen Savanne. Das {\"O}kosystem und alle damit verbundenen Strukturen werden als Grundlage f{\"u}r die Konzeption der Objekte genutzt und fortlaufend weitgehend abstrahiert. Die Produktkollektion, bestehend aus sechs verschiedenen M{\"o}beln und Objekten, stellt zusammen das {\"O}kosystem der afrikanischen Savanne dar. Elemente der Savanne k{\"o}nnen ganz unterschiedlicher Natur sein. Sowohl die bekannten Tiere, wie die sogenannten Big Five, kleine Savannenbewohner:innen oder unterschiedliche Pflanzen bilden zusammen die Grundlage f{\"u}r das {\"O}kosystem. Jedes Objekt bezieht die Inspiration dabei aus einem anderen Element der Savanne. Die Grundlage der Objekte bildet dabei nicht allein das optische Erscheinungsbild der Tiere und Pflanzen, sondern vielmehr die damit verbundenen Emotionen und Reaktionen.}, language = {de} } @misc{BiewendtBlaschkeBoehnert2019, author = {Biewendt, Marcel and Blaschke, Florian and B{\"o}hnert, Arno}, title = {The rebound effect: a critical and systematic review on the current state of affairs}, series = {Abstracts of the International Conference on Sustainable Economy and Agriculture}, journal = {Abstracts of the International Conference on Sustainable Economy and Agriculture}, editor = {Koponicsne Gy{\"o}rke, Diana}, publisher = {Universit{\"a}t Kaposv{\´a}r}, address = {Kaposv{\´a}r}, isbn = {978-615-5599-72-9}, pages = {101 -- 101}, year = {2019}, language = {en} } @phdthesis{Biewendt2022, author = {Biewendt, Marcel}, title = {Socio-Economic challenges in sustainability and resource management}, publisher = {Hungarian University of Agriculture and Life Sciences}, pages = {160 Seiten}, year = {2022}, abstract = {This dissertation uses in first stage a macroeconomic investigation to examine the dependence, influence and corruption of socio-economic development through effects of sustainability and resource management. The conducted research found that the state's dependence on its citizens decreases when the state's sources of revenue are largely detached and independent of the citizens' financial resources. In this case, financial resources are taxes and duties provided by the citizens. One possible consequence is the restriction of state investment in its citizens. Both the qualitative literature review and the quantitative data analysis revealed a negative correlation between socio-economic development and the resource economy's share of GDP for the period under study. The microeconomic investigation was primarily conducted through an intensive literature review. It was shown that the rebound effect as such is already very well researched. However, it also became clear that avoidance strategies for the rebound effect and links to sustainability initiatives are scarce or non-existent. The need for a redesign of the impact analysis with regard to technological innovations and their influence on resource consumption and resource management has become clear on the basis of the present study. Further, emerging and developing countries in particular, which will be confronted in the foreseeable future not only with the fundamental problems of resource abundance in the overall economic context, but also with the issues of their sustainable use, should be confronted with these problems as early as possible in order to find solutions in a timely manner.}, language = {de} } @misc{LippoldtRingbeckHuening2023, author = {Lippoldt, Mario and Ringbeck, Thorsten and H{\"u}ning, Felix}, title = {Verfahren und System zur Erkennung von unerlaubten Fahrzeug-{\"U}berholvorg{\"a}ngen in einer {\"U}berholverbotszone eines Fahrwegs}, year = {2023}, language = {de} } @inproceedings{StarkBartelDitscheetal.2023, author = {Stark, Ralf and Bartel, Sebastian and Ditsche, Florian and Esch, Thomas}, title = {Design study of a 30kN LOX/LCH4 aerospike rocket engine for lunar lander application}, series = {Aerospace Europe Conference 2023 - 10th EUCASS - 9th CEAS}, booktitle = {Aerospace Europe Conference 2023 - 10th EUCASS - 9th CEAS}, pages = {9 Seiten}, year = {2023}, abstract = {Based on lunar lander concept EL3, various LOX/CH4 aerospike engines were studied. A distinction was made between single and cluster configurations as well as ideal and non-ideal contour concepts. It could be shown that non-ideal aerospike engines promise a significant payload gain.}, language = {en} } @inproceedings{StarkRiepingEsch2023, author = {Stark, Ralf and Rieping, Carla and Esch, Thomas}, title = {The impact of guide tubes on flow separation in rocket nozzles}, series = {Aerospace Europe Conference 2023 - 10th EUCASS - 9th CEAS}, booktitle = {Aerospace Europe Conference 2023 - 10th EUCASS - 9th CEAS}, pages = {8 Seiten}, year = {2023}, abstract = {Rocket engine test facilities and launch pads are typically equipped with a guide tube. Its purpose is to ensure the controlled and safe routing of the hot exhaust gases. In addition, the guide tube induces a suction that effects the nozzle flow, namely the flow separation during transient start-up and shut-down of the engine. A cold flow subscale nozzle in combination with a set of guide tubes was studied experimentally to determine the main influencing parameters.}, language = {en} } @article{SchopenNarayanBeckmannetal.2024, author = {Schopen, Oliver and Narayan, Sriram and Beckmann, Marvin and Najmi, Aezid-Ul-Hassan and Esch, Thomas and Shabani, Bahman}, title = {An EIS approach to quantify the effects of inlet air relative humidity on the performance of proton exchange membrane fuel cells: a pathway to developing a novel fault diagnostic method}, series = {International Journal of Hydrogen Energy}, volume = {58}, journal = {International Journal of Hydrogen Energy}, number = {8}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {0360-3199 (print)}, issn = {1879-3487 (online)}, doi = {10.1016/j.ijhydene.2024.01.218}, pages = {1302 -- 1315}, year = {2024}, abstract = {In this work, the effect of low air relative humidity on the operation of a polymer electrolyte membrane fuel cell is investigated. An innovative method through performing in situ electrochemical impedance spectroscopy is utilised to quantify the effect of inlet air relative humidity at the cathode side on internal ionic resistances and output voltage of the fuel cell. In addition, algorithms are developed to analyse the electrochemical characteristics of the fuel cell. For the specific fuel cell stack used in this study, the membrane resistance drops by over 39 \% and the cathode side charge transfer resistance decreases by 23 \% after increasing the humidity from 30 \% to 85 \%, while the results of static operation also show an increase of ∼2.2 \% in the voltage output after increasing the relative humidity from 30 \% to 85 \%. In dynamic operation, visible drying effects occur at < 50 \% relative humidity, whereby the increase of the air side stoichiometry increases the drying effects. Furthermore, other parameters, such as hydrogen humidification, internal stack structure, and operating parameters like stoichiometry, pressure, and temperature affect the overall water balance. Therefore, the optimal humidification range must be determined by considering all these parameters to maximise the fuel cell performance and durability. The results of this study are used to develop a health management system to ensure sufficient humidification by continuously monitoring the fuel cell polarisation data and electrochemical impedance spectroscopy indicators.}, language = {en} } @misc{MachadoDahmannKeimeretal.2020, author = {Machado, Patricia Almeida and Dahmann, Peter and Keimer, Jona and Saretzki, Charlotte and St{\"u}bing, Felix and K{\"u}pper, Thomas}, title = {Stress profile and individual workload monitoring in general aviation pilots - an experiment's setting}, series = {23. Annual Meeting of the German Society of Travel Medicine, Coburg, 18.-19.9.2020}, journal = {23. Annual Meeting of the German Society of Travel Medicine, Coburg, 18.-19.9.2020}, doi = {10.55225/hppa.156}, year = {2020}, language = {en} } @inproceedings{LangohrBungCrookston2022, author = {Langohr, Philipp and Bung, Daniel Bernhard and Crookston, Brian M.}, title = {Hybrid investigation of labyrinth weirs: Discharge capacity and energy dissipation}, series = {Proceedings of the 39th IAHR World Congress}, booktitle = {Proceedings of the 39th IAHR World Congress}, editor = {Ortega-S{\´a}nchez, Miguel}, publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)}, address = {Madrid}, isbn = {978-90-832612-1-8}, issn = {2521-7119 (print)}, doi = {10.3850/IAHR-39WC252171192022738}, pages = {2313 -- 2318}, year = {2022}, abstract = {The replacement of existing spillway crests or gates with labyrinth weirs is a proven techno-economical means to increase the discharge capacity when rehabilitating existing structures. However, additional information is needed regarding energy dissipation of such weirs, since due to the folded weir crest, a three-dimensional flow field is generated, yielding more complex overflow and energy dissipation processes. In this study, CFD simulations of labyrinth weirs were conducted 1) to analyze the discharge coefficients for different discharges to compare the Cd values to literature data and 2) to analyze and improve energy dissipation downstream of the structure. All tests were performed for a structure at laboratory scale with a height of approx. P = 30.5 cm, a ratio of the total crest length to the total width of 4.7, a sidewall angle of 10° and a quarter-round weir crest shape. Tested headwater ratios were 0.089 ≤ HT/P ≤ 0.817. For numerical simulations, FLOW-3D Hydro was employed, solving the RANS equations with use of finite-volume method and RNG k-ε turbulence closure. In terms of discharge capacity, results were compared to data from physical model tests performed at the Utah Water Research Laboratory (Utah State University), emphasizing higher discharge coefficients from CFD than from the physical model. For upstream heads, some discrepancy in the range of ± 1 cm between literature, CFD and physical model tests was identified with a discussion regarding differences included in the manuscript. For downstream energy dissipation, variable tailwater depths were considered to analyze the formation and sweep-out of a hydraulic jump. It was found that even for high discharges, relatively low downstream Froude numbers were obtained due to high energy dissipation involved by the three-dimensional flow between the sidewalls. The effects of some additional energy dissipation devices, e.g. baffle blocks or end sills, were also analyzed. End sills were found to be non-effective. However, baffle blocks with different locations may improve energy dissipation downstream of labyrinth weirs.}, language = {en} } @inproceedings{CrookstonBung2022, author = {Crookston, Brian M. and Bung, Daniel Bernhard}, title = {Application of RGB-D cameras in hydraulic laboratory studies}, series = {Proceedings of the 39th IAHR World Congress}, booktitle = {Proceedings of the 39th IAHR World Congress}, editor = {Ortega-S{\´a}nchez, Miguel}, publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)}, address = {Madrid}, isbn = {978-90-832612-1-8}, issn = {2521-7119 (print)}, doi = {10.3850/IAHR-39WC252171192022964}, pages = {5127 -- 5133}, year = {2022}, abstract = {Non-intrusive measuring techniques have attained a lot of interest in relation to both hydraulic modeling and prototype applications. Complimenting acoustic techniques, significant progress has been made for the development of new optical methods. Computer vision techniques can help to extract new information, e. g. high-resolution velocity and depth data, from videos captured with relatively inexpensive, consumer-grade cameras. Depth cameras are sensors providing information on the distance between the camera and observed features. Currently, sensors with different working principles are available. Stereoscopic systems reference physical image features (passive system) from two perspectives; in order to enhance the number of features and improve the results, a sensor may also estimate the disparity from a detected light to its original projection (active stereo system). In the current study, the RGB-D camera Intel RealSense D435, working on such stereo vision principle, is used in different, typical hydraulic modeling applications. All tests have been conducted at the Utah Water Research Laboratory. This paper will demonstrate the performance and limitations of the RGB-D sensor, installed as a single camera and as camera arrays, applied to 1) detect the free surface for highly turbulent, aerated hydraulic jumps, for free-falling jets and for an energy dissipation basin downstream of a labyrinth weir and 2) to monitor local scours upstream and downstream of a Piano Key Weir. It is intended to share the authors' experiences with respect to camera settings, calibration, lightning conditions and other requirements in order to promote this useful, easily accessible device. Results will be compared to data from classical instrumentation and the literature. It will be shown that even in difficult application, e. g. the detection of a highly turbulent, fluctuating free-surface, the RGB-D sensor may yield similar accuracy as classical, intrusive probes.}, language = {en} } @inproceedings{HuelsenMulsowDabrowskietal.2023, author = {H{\"u}lsen, Benjamin and Mulsow, Niklas A. and Dabrowski, Adam and Brinkmann, Wiebke and G{\"u}tzlaff, Joel and Spies, Leon and Czupalla, Markus and Kirchner, Frank}, title = {Towards an autonomous micro rover with night survivability for lunar exploration}, series = {Proceedings of the 74th International Astronautical Congress}, booktitle = {Proceedings of the 74th International Astronautical Congress}, publisher = {dfki}, pages = {12 Seiten}, year = {2023}, abstract = {In Europe, efforts are underway to develop key technologies that can be used to explore the Moon and to exploit the resources available. This includes technologies for in-situ resource utilization (ISRU), facilitating the possibility of a future Moon Village. The Moon is the next step for humans and robots to exploit the use of available resources for longer term missions, but also for further exploration of the solar system. A challenge for effective exploration missions is to achieve a compact and lightweight robot to reduce launch costs and open up the possibility of secondary payload options. Current micro rover concepts are primarily designed to last for one day of solar illumination and show a low level of autonomy. Extending the lifetime of the system by enabling survival of the lunar night and implementing a high level of autonomy will significantly increase potential mission applications and the operational range. As a reference mission, the deployment of a micro rover in the equatorial region of the Moon is being considered. An overview of mission parameters and a detailed example mission sequence is given in this paper. The mission parameters are based on an in-depth study of current space agency roadmaps, scientific goals, and upcoming flight opportunities. Furthermore, concepts of the ongoing international micro rover developments are analyzed along with technology solutions identified for survival of lunar nights and a high system autonomy. The results provide a basis of a concise requirements set-up to allow dedicated system developments and qualification measures in the future.}, language = {en} } @inproceedings{MulsowHuelsenGuetzlaffetal.2023, author = {Mulsow, Niklas A. and H{\"u}lsen, Benjamin and G{\"u}tzlaff, Joel and Spies, Leon and Bresser, Andreas and Dabrowski, Adam and Czupalla, Markus and Kirchner, Frank}, title = {Concept and design of an autonomous micro rover for long term lunar exploration}, series = {Proceedings of the 74th International Astronautical Congress}, booktitle = {Proceedings of the 74th International Astronautical Congress}, publisher = {dfki}, address = {Saarbr{\"u}cken}, pages = {13 Seiten}, year = {2023}, abstract = {Research on robotic lunar exploration has seen a broad revival, especially since the Google Lunar X-Prize increasingly brought private endeavors into play. This development is supported by national agencies with the aim of enabling long-term lunar infrastructure for in-situ operations and the establishment of a moon village. One challenge for effective exploration missions is developing a compact and lightweight robotic rover to reduce launch costs and open the possibility for secondary payload options. Existing micro rovers for exploration missions are clearly limited by their design for one day of sunlight and their low level of autonomy. For expanding the potential mission applications and range of use, an extension of lifetime could be reached by surviving the lunar night and providing a higher level of autonomy. To address this objective, the paper presents a system design concept for a lightweight micro rover with long-term mission duration capabilities, derived from a multi-day lunar mission scenario at equatorial regions. Technical solution approaches are described, analyzed, and evaluated, with emphasis put on the harmonization of hardware selection due to a strictly limited budget in dimensions and power.}, language = {en} } @unpublished{SchmuellingGuetzlaffCzupalla2024, author = {Schm{\"u}lling, Max and G{\"u}tzlaff, Joel and Czupalla, Markus}, title = {A thermal simulation environment for moving objects on the lunar surface}, doi = {10.21203/rs.3.rs-3902363/v1}, pages = {12 Seiten}, year = {2024}, abstract = {This paper presents a thermal simulation environment for moving objects on the lunar surface. The goal of the thermal simulation environment is to enable the reliable prediction of the temperature development of a given object on the lunar surface by providing the respective heat fluxes for a mission on a given travel path. The user can import any object geometry and freely define the path that the object should travel. Using the path of the object, the relevant lunar surface geometry is imported from a digital elevation model. The relevant parts of the lunar surface are determined based on distance to the defined path. A thermal model of these surface sections is generated, consisting of a porous layer on top and a denser layer below. The object is moved across the lunar surface, and its inclination is adapted depending on the slope of the terrain below it. Finally, a transient thermal analysis of the object and its environment is performed at several positions on its path and the results are visualized. The paper introduces details on the thermal modeling of the lunar surface, as well as its verification. Furthermore, the structure of the created software is presented. The robustness of the environment is verified with the help of sensitivity studies and possible improvements are presented.}, language = {en} } @inproceedings{KohlbergerWildKasperetal.2021, author = {Kohlberger, David-Sharif and Wild, Dominik and Kasper, Stefan and Czupalla, Markus}, title = {Modeling and analyses of a thermal passively stabilized LEO/GEO star tracker with embedded phase change material applying the Infused Thermal Solutions (ITS) method}, series = {ICES202: Satellite, Payload, and Instrument Thermal Control}, booktitle = {ICES202: Satellite, Payload, and Instrument Thermal Control}, publisher = {Texas Tech University}, address = {Lubbock, Tex.}, pages = {12 Seiten}, year = {2021}, abstract = {Phase change materials offer a way of storing excess heat and releasing it when it is needed. They can be utilized as a method to control thermal behavior without the need for additional energy. This work focuses on exploring the potential of using phase change materials to passively control the thermal behavior of a star tracker by infusing it with a fitting phase change material. Based on the numerical model of the star trackers thermal behavior using ESATAN-TMS without implemented phase change material, a fitting phase change material for selected orbits is chosen and implemented in the thermal model. The altered thermal behavior of the numerical model after the implementation is analyzed for different amounts of the chosen phase change materials using an ESATAN-based subroutine developed by the FH Aachen. The PCM-modelling-subroutine is explained in the paper ICES-2021-110. The results show that an increasing amount of phase change material increasingly damps temperature oscillations. Using an integral part structure some of the mass increase can be compensated.}, language = {en} } @inproceedings{WildCzupallaFoerstner2021, author = {Wild, Dominik and Czupalla, Markus and F{\"o}rstner, Roger}, title = {Modeling, prediction and test of additive manufactured integral structures with embedded lattice and phase change material applying Infused Thermal Solutions (ITS)}, series = {ICES104: Advances in Thermal Control Technology}, booktitle = {ICES104: Advances in Thermal Control Technology}, publisher = {Texas Tech University}, address = {Lubbock, Tex.}, pages = {12 Seiten}, year = {2021}, abstract = {Infused Thermal Solutions (ITS) introduces a method for passive thermal control to stabilize structural components thermally without active heating and cooling systems, but with phase change material (PCM) for thermal energy storage (TES), in combination with lattice - both embedded in additive manufactured functional structures. In this ITS follow-on paper a thermal model approach and associated predictions are presented, related on the ITS functional breadboards developed at FH Aachen. Predictive TES by PCM is provided by a specially developed ITS PCM subroutine, which is applicable in ESATAN. The subroutine is based on the latent heat storage (LHS) method to numerically embed thermo-physical PCM behavior. Furthermore, a modeling approach is introduced to numerically consider the virtual PCM/lattice nodes within the macro-encapsulated PCM voids of the double wall ITS design. Related on these virtual nodes, in-plane and out-of-plane conductive links are defined. The recent additive manufactured ITS breadboard series are thermally cycled in the thermal vacuum chamber, both with and without embedded PCM. Related on breadboard hardware tests, measurement results are compared with predictions and are subsequently correlated. The results of specific simulations and measurements are presented. Recent predictive results of star tracker analyses are also presented in ICES-2021-106, based on this ITS PCM subroutine.}, language = {en} } @article{SchopenShahEschetal.2024, author = {Schopen, Oliver and Shah, Neel and Esch, Thomas and Shabani, Bahman}, title = {Critical quantitative evaluation of integrated health management methods for fuel cell applications}, series = {International Journal of Hydrogen Energy}, volume = {70}, journal = {International Journal of Hydrogen Energy}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2024.05.156}, pages = {370 -- 388}, year = {2024}, abstract = {Online fault diagnostics is a crucial consideration for fuel cell systems, particularly in mobile applications, to limit downtime and degradation, and to increase lifetime. Guided by a critical literature review, in this paper an overview of Health management systems classified in a scheme is presented, introducing commonly utilised methods to diagnose FCs in various applications. In this novel scheme, various Health management system methods are summarised and structured to provide an overview of existing systems including their associated tools. These systems are classified into four categories mainly focused on model-based and non-model-based systems. The individual methods are critically discussed when used individually or combined aimed at further understanding their functionality and suitability in different applications. Additionally, a tool is introduced to evaluate methods from each category based on the scheme presented. This tool applies the technique of matrix evaluation utilising several key parameters to identify the most appropriate methods for a given application. Based on this evaluation, the most suitable methods for each specific application are combined to build an integrated Health management system.}, language = {en} } @article{Czupalla2017, author = {Czupalla, Markus}, title = {Ein Garten im Weltraum}, series = {Spektrum der Wissenschaft}, journal = {Spektrum der Wissenschaft}, publisher = {Spektrum-der-Wiss.-Verl.-Ges.}, address = {Heidelberg}, year = {2017}, language = {de} } @misc{EcclestonDrummondMiddletonetal.2020, author = {Eccleston, Paul and Drummond, Rachel and Middleton, Kevin and Bishop, Georgia and Caldwell, Andrew and Desjonqueres, Lucile and Tosh, Ian and Cann, Nick and Crook, Martin and Hills, Matthew and Pearson, Chris and Simpson, Caroline and Stamper, Richard and Tinetti, Giovanna and Pascale, Enzo and Swain, Mark and Holmes, Warren A. and Wong, Andre and Puig, Ludovic and Pilbratt, G{\"o}ran and Linder, Martin and Boudin, Nathalie and Ertel, Hanno and Gambicorti, Lisa and Halain, Jean-Philippe and Pace, Emanuele and Vilardell, Francesc and G{\´o}mez, Jos{\´e} M. and Colom{\´e}, Josep and Amiaux, J{\´e}r{\^o}me and Cara, Christophe and Berthe, Michel and Moreau, Vincent and Morgante, Gianluca and Malaguti, Giuseppe and Alonso, Gustavo and {\´A}lvarez, Javier P. and Ollivier, Marc and Philippon, Anne and Hellin, Marie-Laure and Roose, Steve and Frericks, Martin and Krijger, Matthijs and Rataj, Miroslaw and Wawer, Piotr and Skup, Konrad and Sobiecki, Mateusz and Christian Jessen, Niels and M{\o}ller Pedersen, S{\o}ren and Hargrave, Peter and Griffin, Matt and Ottensamer, Roland and Hunt, Thomas and Rust, Duncan and Saleh, Aymen and Winter, Berend and Focardi, Mauro and Da Deppo, Vania and Zuppella, Paola and Czupalla, Markus}, title = {The ARIEL payload: A technical overview}, series = {Space Telescopes and Instrumentation 2020: Optical, Infrared, and Millimeter Wave}, volume = {11443}, journal = {Space Telescopes and Instrumentation 2020: Optical, Infrared, and Millimeter Wave}, editor = {Lystrup, Makenzie and Perrin, Marshall D. and Batalha, Natalie and Siegler, Nicholas and Tong, Edward C.}, publisher = {SPIE}, address = {Washington}, doi = {10.1117/12.2561478}, pages = {114430Z}, year = {2020}, abstract = {The Atmospheric Remote-Sensing Infrared Exoplanet Large-survey, ARIEL, has been selected to be the next (M4) medium class space mission in the ESA Cosmic Vision programme. From launch in 2028, and during the following 4 years of operation, ARIEL will perform precise spectroscopy of the atmospheres of ~1000 known transiting exoplanets using its metre-class telescope. A three-band photometer and three spectrometers cover the 0.5 µm to 7.8 µm region of the electromagnetic spectrum. This paper gives an overview of the mission payload, including the telescope assembly, the FGS (Fine Guidance System) - which provides both pointing information to the spacecraft and scientific photometry and low-resolution spectrometer data, the ARIEL InfraRed Spectrometer (AIRS), and other payload infrastructure such as the warm electronics, structures and cryogenic cooling systems.}, language = {en} } @misc{ReiswichBrandtCzupalla2019, author = {Reiswich, Martin and Brandt, Hannes and Czupalla, Markus}, title = {Passive thermal control by integration of phase change material into additively manufactured structures}, series = {E2. 47th Student conference}, journal = {E2. 47th Student conference}, year = {2019}, abstract = {Optical Instruments require an extremely stable thermal surrounding to prevent loss of data quality by misalignments of the instrument components resulting from material deformation due to temperature f luctuations (e.g. from solar intrusion). Phase Change Material (PCM) can be applied as a thermal damper to achieve a more uniform temperature distribution. The challenge of this method is, among others, the integration of PCM into affected areas. If correctly designed, incoming heat is latently absorbed during phase change of the PCM, i.e. the temperature of a structure remains almost constant. In a cold phase, the heat during phase change is released again latently until the PCM returns to its original state of aggregation. Thus, the structure is thermally stabilized. At FH Aachen- University of Applied Sciences research is conducted to apply PCM directly into the structures of affected components (baffles, optical benches, electronic boxes, etc.). Through the application of Additive Manufacturing, the necessary voids are directly printed into these structures and filled later with PCM. Additive Manufacturing enables complex structures that would not have been possible with conservative manufacturing methods. A corresponding Breadboard was developed and manufactured by Selective Laser Melting (SLM). The current state of research includes the handling and analysis of the Breadboard, tests and a correlation of the thermal model. The results have shown analytically and practically that it is possible to use PCM as an integral part of the structure as a thermal damper. The results serve as a basis for the further development of the technology, which should maximize performance and enable the integration of PCM into much more complex structures.}, language = {en} } @misc{GamgamiCzupallaGarciaetal.2016, author = {Gamgami, Farid and Czupalla, Markus and Garcia, Antonio and Agnolon, David}, title = {From planetary transits to spacecraft design: achieving PLATO's pointing performance}, series = {A7. Symposium on technological Requirement for future space astronomy and solar-system science missions}, journal = {A7. Symposium on technological Requirement for future space astronomy and solar-system science missions}, year = {2016}, abstract = {In the last decades, several hundred exoplanets could be detected thanks to space-based observatories, namely CNES' COROT and NASA's Kepler. To expand this quest ESA plans to launch CHEOPS as the f irst small class mission in the cosmic visions program (S1) and PLATO as the 3rd medium class mission, so called M3 . PLATO's primary objective is the detection of Earth like Exoplanets orbiting solar type stars in the habitable zone and characterisation of their bulk properties. This is possible by precise lightcurve measurement via 34 cameras. That said it becomes obvious that accurate pointing is key to achieve the required signal to noise ratio for positive transit detection. The paper will start with a comprehensive overview of PLATO's mission objectives and mission architecture. Hereafter, special focus will be devoted to PLATO's pointing requirements. Understanding the very nature of PLATO's pointing requirements is essential to derive a design baseline to achieve the required performance. The PLATO frequency domain is of particular interest, ranging from 40 mHz to 3 Hz. Due to the very different time-scales involved, the spectral pointing requirement is decomposed into a high frequency part dominated by the attitude control system and the low frequency part dominated by the thermo-elastic properties of the spacecraft's configuration. Both pose stringent constraints on the overall design as well as technology properties to comply with the derived requirements and thus assure a successful mission.}, language = {en} } @inproceedings{BungLangohrWaldenberger2023, author = {Bung, Daniel Bernhard and Langohr, Phillip and Waldenberger, Lisa}, title = {Influence of cycle number in CFD studies of labyrinth weirs}, series = {Proceedings of the 40th IAHR World Congress (Vienna, 2023)}, booktitle = {Proceedings of the 40th IAHR World Congress (Vienna, 2023)}, editor = {Habersack, Helmut and Tritthart, Michael}, publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)}, address = {Madrid}, isbn = {978-90-833476-1-5}, issn = {L 2521-7119 (online)}, doi = {10.3850/978-90-833476-1-5_iahr40wc-p0531-cd}, year = {2023}, abstract = {The major advantage of labyrinth weirs over linear weirs is hydraulic efficiency. In hydraulic modeling efforts, this strength contrasts with limited pump capacity as well as limited computational power for CFD simulations. For the latter, reducing the number of investigated cycles can significantly reduce necessary computational time. In this study, a labyrinth weir with different cycle numbers was investigated. The simulations were conducted in FLOW-3D HYDRO as a Large Eddy Simulation. With a mean deviation of 1.75 \% between simulated discharge coefficients and literature design equations, a reasonable agreement was found. For downstream conditions, overall consistent results were observed as well. However, the orientation of labyrinth weirs with a single cycle should be chosen carefully under consideration of the individual research purpose.}, language = {en} } @article{DroopChenRadfordetal.2023, author = {Droop, Philipp and Chen, Shaohuang and Radford, Melissa J. and Paulßen, Elisabeth and Gates, Byron D. and Reilly, Raymond M. and Radchenko, Valery and Hoehr, Cornelia}, title = {Synthesis of 197m/gHg labelled gold nanoparticles for targeted radionuclide therapy}, series = {Radiochimica Acta}, volume = {111}, journal = {Radiochimica Acta}, number = {10}, publisher = {De Gruyter}, address = {Berlin [u.a.]}, issn = {2193-3405}, doi = {10.1515/ract-2023-0144}, pages = {773 -- 779}, year = {2023}, abstract = {Meitner-Auger-electron emitters have a promising potential for targeted radionuclide therapy of cancer because of their short range and the high linear energy transfer of Meitner-Auger-electrons (MAE). One promising MAE candidate is 197m/gHg with its half-life of 23.8 h and 64.1 h, respectively, and high MAE yield. Gold nanoparticles (AuNPs) that are labelled with 197m/gHg could be a helpful tool for radiation treatment of glioblastoma multiforme when infused into the surgical cavity after resection to prevent recurrence. To produce such AuNPs, 197m/gHg was embedded into pristine AuNPs. Two different syntheses were tested starting from irradiated gold containing trace amounts of 197m/gHg. When sodium citrate was used as reducing agent, no 197m/gHg labelled AuNPs were formed, but with tannic acid, 197m/gHg labeled AuNPs were produced. The method was optimized by neutralizing the pH (pH = 7) of the Au/197m/gHg solution, which led to labelled AuNPs with a size of 12.3 ± 2.0 nm as measured by transmission electron microscopy. The labelled AuNPs had a concentration of 50 μg (gold)/mL with an activity of 151 ± 93 kBq/mL (197gHg, time corrected to the end of bombardment).}, language = {en} } @article{MuesgenanntKoersMcNeilRadchenkoetal.2023, author = {Mues genannt Koers, Lucas and McNeil, S. W. and Radchenko, V. and Paulßen, Elisabeth and Hoehr, Cornelia}, title = {Production of Co-58m in a siphon-style liquid target on a medical cyclotron}, volume = {195}, number = {Art. 110734}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0969-8043}, doi = {10.1016/j.apradiso.2023.110734}, year = {2023}, abstract = {We present the production of 58mCo on a small, 13 MeV medical cyclotron utilizing a siphon style liquid target system. Different concentrated iron(III)-nitrate solutions of natural isotopic distribution were irradiated at varying initial pressures and subsequently separated by solid phase extraction chromatography. The radio cobalt (58m/gCo and 56Co) was successfully produced with saturation activities of (0.35 ± 0.03) MBq μA-1 for 58mCo with a separation recovery of (75 ± 2) \% of cobalt after one separation step utilizing LN-resin.}, language = {en} } @article{MuesgenanntKoersPrevostPaulssenetal.2023, author = {Mues genannt Koers, Lucas and Prevost, David and Paulßen, Elisabeth and Hoehr, Cornelia}, title = {Density reduction effects on the production of [11C]CO2 in Nb-body targets on a medical cyclotron}, volume = {199}, number = {Art. 110911}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.1016/j.apradiso.2023.110911}, year = {2023}, abstract = {Medical isotope production of 11C is commonly performed in gaseous targets. The power deposition of the proton beam during the irradiation decreases the target density due to thermodynamic mixing and can cause an increase of penetration depth and divergence of the proton beam. In order to investigate the difference how the target-body length influences the operation conditions and the production yield, a 12 cm and a 22 cm Nb-target body containing N2/O2 gas were irradiated using a 13 MeV proton cyclotron. It was found that the density reduction has a large influence on the pressure rise during irradiation and the achievable radioactive yield. The saturation activity of [11C]CO2 for the long target (0.083 Ci/μA) is about 10\% higher than in the short target geometry (0.075 Ci/μA).}, language = {en} } @phdthesis{Bung2023, author = {Bung, Daniel Bernhard}, title = {Imaging techniques for investigation of free-surface flows in hydraulic laboratories}, doi = {10.25926/BUW/0-172}, pages = {XXIII, 218 Seiten}, year = {2023}, abstract = {This thesis aims at the presentation and discussion of well-accepted and new imaging techniques applied to different types of flow in common hydraulic engineering environments. All studies are conducted in laboratory conditions and focus on flow depth and velocity measurements. Investigated flows cover a wide range of complexity, e.g. propagation of waves, dam-break flows, slightly and fully aerated spillway flows as well as highly turbulent hydraulic jumps. Newimagingmethods are compared to different types of sensorswhich are frequently employed in contemporary laboratory studies. This classical instrumentation as well as the general concept of hydraulic modeling is introduced to give an overview on experimental methods. Flow depths are commonly measured by means of ultrasonic sensors, also known as acoustic displacement sensors. These sensors may provide accurate data with high sample rates in case of simple flow conditions, e.g. low-turbulent clear water flows. However, with increasing turbulence, higher uncertainty must be considered. Moreover, ultrasonic sensors can provide point data only, while the relatively large acoustic beam footprint may lead to another source of uncertainty in case of relatively short, highly turbulent surface fluctuations (ripples) or free-surface air-water flows. Analysis of turbulent length and time scales of surface fluctuations from point measurements is also difficult. Imaging techniques with different dimensionality, however, may close this gap. It is shown in this thesis that edge detection methods (known from computer vision) may be used for two-dimensional free-surface extraction (i.e. from images taken through transparant sidewalls in laboratory flumes). Another opportunity in hydraulic laboratory studies comes with the application of stereo vision. Low-cost RGB-D sensors can be used to gather instantaneous, three-dimensional free-surface elevations, even in flows with very high complexity (e.g. aerated hydraulic jumps). It will be shown that the uncertainty of these methods is of similar order as for classical instruments. Particle Image Velocimetry (PIV) is a well-accepted and widespread imaging technique for velocity determination in laboratory conditions. In combination with high-speed cameras, PIV can give time-resolved velocity fields in 2D/3D or even as volumetric flow fields. PIV is based on a cross-correlation technique applied to small subimages of seeded flows. The minimum size of these subimages defines the maximum spatial resolution of resulting velocity fields. A derivative of PIV for aerated flows is also available, i.e. the so-called Bubble Image Velocimetry (BIV). This thesis emphasizes the capacities and limitations of both methods, using relatively simple setups with halogen and LED illuminations. It will be demonstrated that PIV/BIV images may also be processed by means of Optical Flow (OF) techniques. OF is another method originating from the computer vision discipline, based on the assumption of image brightness conservation within a sequence of images. The Horn-Schunck approach, which has been first employed to hydraulic engineering problems in the studies presented herein, yields dense velocity fields, i.e. pixelwise velocity data. As discussed hereinafter, the accuracy of OF competes well with PIV for clear-water flows and even improves results (compared to BIV) for aerated flow conditions. In order to independently benchmark the OF approach, synthetic images with defined turbulence intensitiy are used. Computer vision offers new opportunities that may help to improve the understanding of fluid mechanics and fluid-structure interactions in laboratory investigations. In prototype environments, it can be employed for obstacle detection (e.g. identification of potential fish migration corridors) and recognition (e.g. fish species for monitoring in a fishway) or surface reconstruction (e.g. inspection of hydraulic structures). It can thus be expected that applications to hydraulic engineering problems will develop rapidly in near future. Current methods have not been developed for fluids in motion. Systematic future developments are needed to improve the results in such difficult conditions.}, language = {en} } @article{KleefeldPieronek2020, author = {Kleefeld, Andreas and Pieronek, J.}, title = {Elastic transmission eigenvalues and their computation via the method of fundamental solutions}, series = {Applicable Analysis}, volume = {100}, journal = {Applicable Analysis}, number = {16}, publisher = {Taylore \& Francis}, address = {London}, issn = {1563-504X}, doi = {10.1080/00036811.2020.1721473}, pages = {3445 -- 3462}, year = {2020}, abstract = {A stabilized version of the fundamental solution method to catch ill-conditioning effects is investigated with focus on the computation of complex-valued elastic interior transmission eigenvalues in two dimensions for homogeneous and isotropic media. Its algorithm can be implemented very shortly and adopts to many similar partial differential equation-based eigenproblems as long as the underlying fundamental solution function can be easily generated. We develop a corroborative approximation analysis which also implicates new basic results for transmission eigenfunctions and present some numerical examples which together prove successful feasibility of our eigenvalue recovery approach.}, language = {en} } @inproceedings{MayntzKeimerDahmannetal.2022, author = {Mayntz, Joscha and Keimer, Jona and Dahmann, Peter and Hille, Sebastian and Stumpf, Eike and Fisher, Alex and Dorrington, Graham}, title = {Electrical Drive and Regeneration in General Aviation Flight with Propellers}, series = {Deutscher Luft- und Raumfahrtkongress 2020}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2020}, publisher = {DGLR}, address = {Bonn}, doi = {10.25967/530100}, pages = {8 Seiten}, year = {2022}, abstract = {Electric flight has the potential for a more sustainable and energy-saving way of aviation compared to fossil fuel aviation. The electric motor can be used as a generator inflight to regenerate energy during descent. Three different approaches to regenerating with electric propeller powertrains are proposed in this paper. The powertrain is to be set up in a wind tunnel to determine the propeller efficiency in both working modes as well as the noise emissions. Furthermore, the planned flight tests are discussed. In preparation for these tests, a yaw stability analysis is performed with the result that the aeroplane is controllable during flight and in the most critical failure case. The paper shows the potential for inflight regeneration and addresses the research gaps in the dual role of electric powertrains for propulsion and regeneration of general aviation aircraft.}, language = {en} } @misc{MayntzKeimerTegtmeyeretal.2021, author = {Mayntz, Joscha and Keimer, Jona and Tegtmeyer, Philipp and Dahmann, Peter and Hille, Sebastian and Stumpf, Eike and Fisher, Alex and Dorrington, Graham}, title = {Aerodynamic Investigation on Efficient Inflight Transition of a Propeller from Propulsion to Regeneration Mode}, series = {AIAA SCITECH 2022 Forum}, journal = {AIAA SCITECH 2022 Forum}, publisher = {AIAA}, address = {Reston, Va.}, doi = {10.2514/6.2022-0546}, year = {2021}, abstract = {This paper discusses a new way of inflight power regeneration for electric or hybrid-electric driven general aviation aircraft with one powertrain for both configurations. Three different approaches for the shift from propulsion to regeneration mode are analyzed. Numerical cal-culation and wind tunnel results are compared and show the highest regeneration potential for the "Windmill" approach, where the propeller blades are flipped, and rotation is reversed. A combination of all regeneration approaches for a realistic flight mission is discussed.}, language = {en} } @article{SaretzkiBergmannDahmannetal.2021, author = {Saretzki, Charlotte and Bergmann, Ole and Dahmann, Peter and Janser, Frank and Keimer, Jona and Machado, Patricia and Morrison, Audry and Page, Henry and Pluta, Emil and St{\"u}bing, Felix and K{\"u}pper, Thomas}, title = {Are small airplanes safe with regards to COVID-19 transmission?}, series = {Journal of Travel Medicine}, volume = {28}, journal = {Journal of Travel Medicine}, number = {7}, publisher = {Oxford University Press}, address = {Oxford}, issn = {1708-8305}, doi = {10.1093/jtm/taab105}, year = {2021}, language = {en} } @inproceedings{TreulingCzarneckiWolf2023, author = {Treuling, Clemens and Czarnecki, Christian and Wolf, Martin R.}, title = {Projekt WiLMo - Wirtschaftsinformatik Lehr- und Lernmodule}, series = {Angewandte Forschung in der Wirtschaftsinformatik 2023 : Tagungsband zur 36. AKWI-Jahrestagung}, booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2023 : Tagungsband zur 36. AKWI-Jahrestagung}, pages = {161 -- 169}, year = {2023}, abstract = {Die potenziellen Auswirkungen der Digitalisierung auf die Lehre sind seit langem Gegenstand ausf{\"u}hrlicher Diskussionen innerhalb der Wirtschaftsinformatik (WI) (z. B. in Auth et al. 2021, Barton et al. 2019, Klotz et al. 2019). Nicht zuletzt der in nahezu allen Wirtschaftszweigen bestehende Mangel an qualifizierten Fachkr{\"a}ften lenkt den Diskurs auf einen verbesserten Zugang zu Bildung und gleichen Bildungschancen. Aus dieser Vision heraus und dem Schub der Digitalisierung entstehen Bildungskonzepte wie Open Educational Resources (OER), die gesellschaftlichen Problemen, wie dem des Fachkr{\"a}ftemangels, entgegenwirken sollen. Im Rahmen dieses Kurzbeitrags wird das Projekt WiLMo - "Wirtschaftsinformatik Lehr- und Lernmodule" vorgestellt. WiLMo wird im Rahmen von OERContent.nrw unter Beteiligung von sechs Hochschulen entwickelt und gef{\"o}rdert. Alle Projektbeteiligten arbeiten gemeinsam daran, einheitliche digitale Lehr- und Lernmaterialien im OER-Format f{\"u}r die Kernmodule der Wirtschaftsinformatik zu entwickeln und in garantiert hoher Qualit{\"a}t zur Verf{\"u}gung zu stellen.}, language = {de} } @misc{KeimerGirbigMayntzetal.2022, author = {Keimer, Jona and Girbig, Leo and Mayntz, Joscha and Tegtmeyer, Philipp and Wendland, Frederik and Dahman, Peter and Fisher, Alex and Dorrington, Graham}, title = {Flight mission optimization for eco-efficiency in consideration of electric regeneration and atmospheric conditions}, series = {AIAA AVIATION 2022 Forum}, journal = {AIAA AVIATION 2022 Forum}, publisher = {AIAA}, address = {Reston, Va.}, doi = {10.2514/6.2022-4118}, year = {2022}, abstract = {The development and operation of hybrid or purely electrically powered aircraft in regional air mobility is a significant challenge for the entire aviation sector. This technology is expected to lead to substantial advances in flight performance, energy efficiency, reliability, safety, noise reduction, and exhaust emissions. Nevertheless, any consumed energy results in heat or carbon dioxide emissions and limited electric energy storage capabilities suppress commercial use. Therefore, the significant challenges to achieving eco-efficient aviation are increased aircraft efficiency, the development of new energy storage technologies, and the optimization of flight operations. Two major approaches for higher eco-efficiency are identified: The first one, is to take horizontal and vertical atmospheric motion phenomena into account. Where, in particular, atmospheric waves hold exciting potential. The second one is the use of the regeneration ability of electric aircraft. The fusion of both strategies is expected to improve efficiency. The objective is to reduce energy consumption during flight while not neglecting commercial usability and convenient flight characteristics. Therefore, an optimized control problem based on a general aviation class aircraft has to be developed and validated by flight experiments. The formulated approach enables a development of detailed knowledge of the potential and limitations of optimizing flight missions, considering the capability of regeneration and atmospheric influences to increase efficiency and range.}, language = {en} } @book{Czarnecki2023, author = {Czarnecki, Christian}, title = {Angewandte Forschung in der Wirtschaftsinformatik 2023 : Tagungsband zur 36. AKWI-Jahrestagung}, editor = {Czarnecki, Christian and L{\"u}bbe, Alexander and Meister, Vera G. and M{\"u}ller, Christian and Steglich, Mike and Walther, Mathias}, organization = {Arbeitskreis Wirtschaftsinformatik an Hochschulen f{\"u}r Angewandte Wissenschaften im deutschsprachigen Raum (AKWI)}, doi = {10.15771/1794}, pages = {214 Seiten}, year = {2023}, abstract = {Beitr{\"a}ge der Fachtagung „Angewandte Forschung in der Wirtschaftsinformatik - Zukunft gestalten" im Rahmen der 36. Jahrestagung des Arbeitskreises Wirtschaftsinformatik an Hochschulen f{\"u}r Angewandte Wissenschaften (AKWI) vom 11. bis 13.09.2023 an der Technischen Hochschule Wildau}, language = {de} } @article{Bung2024, author = {Bung, Daniel Bernhard}, title = {Kamerabasierte Fließtiefen- und Geschwindigkeitsmessungen}, series = {Wasserwirtschaft}, volume = {114}, journal = {Wasserwirtschaft}, number = {4}, publisher = {Springer Vieweg}, address = {Wiesbaden}, issn = {0043-0978}, pages = {47 -- 53}, year = {2024}, abstract = {In der wasserbaulichen Forschung werden neben klassischen Messinstrumenten zunehmend kamerabasierte Verfahren genutzt. Diese erlauben neben der Bestimmung von Fließgeschwindigkeiten auch die Detektion der freien Wasseroberfl{\"a}che oder zeitliche Vermessung von Kolken. Durch die hohen r{\"a}umlichen und zeitlichen Aufl{\"o}sungen, welche neueste Kamerasensoren liefern, k{\"o}nnen neue Erkenntnisse in turbulenten, komplexen Str{\"o}mungen gewonnen werden. Auch in der Praxis k{\"o}nnen diese Verfahren mit geringem Aufwand wichtige Daten liefern.}, language = {de} } @incollection{SchultLosseCzarneckietal.2023, author = {Schult, Prince Garcia and Losse, Ann-Kathrin and Czarnecki, Christian and Sultanow, Eldar}, title = {Proposing a Framework to address the Sustainable Development Goals}, series = {EnviroInfo 2023}, booktitle = {EnviroInfo 2023}, publisher = {GI - Gesellschaft f{\"u}r Informatik}, address = {Bonn}, isbn = {978-3-88579-736-4}, issn = {1617-5468}, doi = {10.18420/env2023-022}, pages = {243 -- 249}, year = {2023}, abstract = {Reducing poverty, protecting the planet, and improving life on earth for everyone are the essential goals of the "2030 Agenda for Sustainable Development"committed by the United Nations (UN). Achieving those goals will require technological innovation as well as their implementation in almost all areas of our business and day-to-day life. This paper proposes a high-level framework that collects and structures different uses cases addressing the goals defined by the UN. Hence, it contributes to the discussion by proposing technical innovations that can be used to achieve those goals. As an example, the goal "Climate Action{\"i}s discussed in detail by describing use cases related to tackling biodiversity loss in order to conservate ecosystems.}, language = {en} } @article{OertelBung2021, author = {Oertel, Mario and Bung, Daniel Bernhard}, title = {Hochwasserschutz - eine Aufgabe f{\"u}r eine nachhaltige Wasserwirtschaft}, series = {Wasserwirtschaft}, volume = {111}, journal = {Wasserwirtschaft}, number = {9-10}, publisher = {Springer Vieweg}, address = {Wiesbaden}, issn = {0043-0978}, pages = {3 -- 19}, year = {2021}, language = {de} }