@inproceedings{FateriGebhardt2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Jewelry fabrication via selective laser melting of glass},
  series = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications},
  booktitle = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications},
  isbn      = {978-0-7918-4583-7},
  doi       = {10.1115/ESDA2014-20380},
  pages     = {V001T06A005},
  year      = {2014},
  abstract  = {Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.},
  language  = {en}
}
@inproceedings{PfaffVinsonneauBurnham2006,
  author    = {Pfaff, Raphael and Vinsonneau, B. and Burnham, K. J.},
  title     = {Multiple models for nonlinear systems},
  series = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]},
  booktitle = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]},
  organization    = {International Conference on Systems Engineering <18, 2006, Coventry>},
  isbn      = {1-84600-013-0},
  pages     = {347 -- 352},
  year      = {2006},
  language  = {en}
}
@incollection{FrotscherGossmannRaatschenetal.2015,
  author    = {Frotscher, Ralf and Goßmann, Matthias and Raatschen, Hans-J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred},
  title     = {Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM},
  series = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  booktitle = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-319-02534-6 ; 978-3-319-02535-3},
  pages     = {187 -- 212},
  year      = {2015},
  abstract  = {We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.},
  language  = {en}
}
@article{FateriGebhardtThuemmleretal.2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura},
  title     = {Experimental investigation on selective laser melting of glass},
  series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  volume    = {56 (2014)},
  journal   = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  doi       = {10.1016/j.phpro.2014.08.118},
  pages     = {357 -- 364},
  year      = {2014},
  language  = {en}
}
@article{SeilerPichlerPfaffetal.2009,
  author    = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and Srulijes, Julio},
  title     = {Novel processing tools for automated doppler picture velocimetry (DPV) evaluation},
  series = {Journal of visualization},
  volume    = {Vol. 12},
  journal   = {Journal of visualization},
  number    = {Iss. 4},
  issn      = {1343-8875},
  pages     = {323 -- 337},
  year      = {2009},
  language  = {en}
}
@article{PfaffBurnham2009,
  author    = {Pfaff, Raphael and Burnham, Keith J.},
  title     = {On abstraction and interpretability: a behavioural perspective},
  series = {Systems Science},
  volume    = {Vol. 35},
  journal   = {Systems Science},
  number    = {Iss. 2},
  issn      = {0137-1223},
  pages     = {19 -- 26},
  year      = {2009},
  language  = {en}
}
@inproceedings{PfaffBurnham2008,
  author    = {Pfaff, Raphael and Burnham, Keith J.},
  title     = {On abstraction and interpretability: a behavioural perspective},
  series = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada},
  booktitle = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Systems Engineering <19, 2008, Las Vegas, Nev.>},
  isbn      = {978-0-7695-3331-5 ; 978-0-7695-2719-2},
  pages     = {89 -- 94},
  year      = {2008},
  language  = {en}
}
@inproceedings{PfaffPichlerGeorgeetal.2007,
  author    = {Pfaff, Raphael and Pichler, Alexander and George, Alfred and Seiler, Friedrich},
  title     = {Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007},
  series = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620},
  booktitle = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620},
  publisher = {ISL},
  address   = {Saint Louis, France},
  organization    = {International Conference on Systems Science <16, 2007, Wroclaw>},
  pages     = {1 -- 10},
  year      = {2007},
  language  = {en}
}
@inproceedings{SeilerPichlerPfaffetal.2008,
  author    = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and George, Alfred and Srulijes, Julio},
  title     = {Improved Doppler picture velocimetry and new automated processing},
  series = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008},
  booktitle = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008},
  organization    = {International Symposium on Applications of Laser Techniques to Fluid Mechanics <14, 2008, Lisboa>},
  pages     = {1 -- 12},
  year      = {2008},
  language  = {en}
}
@inproceedings{PfaffLarkowskiBurnham2010,
  author    = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.},
  title     = {An approach to adaptive control in the behavioural framework},
  series = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  booktitle = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {United Kingdom Automatic Control Council},
  isbn      = {978-1-62748-119-9},
  pages     = {833 -- 838},
  year      = {2010},
  language  = {en}
}
@inproceedings{PfaffLarkowskiBurnham2011,
  author    = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.},
  title     = {An application of adaptive control in the behavioural framework},
  series = {21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings},
  booktitle = {21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Systems Engineering <21, 2011, Las Vegas>},
  isbn      = {978-1-4577-1078-0 ; 978-0-7695-4495-3},
  pages     = {49 -- 54},
  year      = {2011},
  language  = {en}
}
@misc{Pfaff2006,
  type      = {Master Thesis},
  author    = {Pfaff, Raphael},
  title     = {Modelling of nonlinear systems using piecewise defined models},
  year      = {2006},
  language  = {en}
}
@masterthesis{Pfaff2007,
  type      = {Bachelor Thesis},
  author    = {Pfaff, Raphael},
  title     = {Automated processing of the ISL Doppler images},
  year      = {2007},
  language  = {en}
}
@phdthesis{Pfaff2013,
  author    = {Pfaff, Raphael},
  title     = {Evaluation and extension of the potential for application of the behavioural framework to practical engineering problems},
  pages     = {XVI, 231 S.},
  year      = {2013},
  language  = {en}
}
@inproceedings{FateriGebhardtKhosravi2013,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Khosravi, Maziar},
  title     = {Experimental investigation of selective laser melting of lunar regolith for in-situ applications},
  series = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing},
  booktitle = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing},
  publisher = {ASME},
  organization    = {American Society of Mechanical Engineers},
  isbn      = {978-0-7918-5618-5},
  pages     = {V02AT02A008},
  year      = {2013},
  language  = {en}
}
@inproceedings{StarkeKunkelHahn2013,
  author    = {Starke, G{\"u}nther and Kunkel, Thomas and Hahn, Daniel},
  title     = {Flexible collaboration and control of heterogeneous mechatronic devices and systems by means of an event-driven, SOA-based automation concept},
  series = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)},
  booktitle = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Industrial Technologies <2013, Cape Town>},
  isbn      = {978-1-4673-4567-5 ; 978-1-4673-4569-9},
  pages     = {1982 -- 1987},
  year      = {2013},
  language  = {en}
}
@article{HoetterFateriGebhardt2012,
  author    = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Selective laser melting of metals: desktop machines open up new chances even for small companies},
  series = {Advanced materials research},
  volume    = {622-623},
  journal   = {Advanced materials research},
  publisher = {Trans Tech Publ.},
  address   = {Baech},
  issn      = {1662-8985 (E-Journal); 1022-6680 (Print)},
  doi       = {10.4028/www.scientific.net/AMR.622-623.461},
  pages     = {461 -- 465},
  year      = {2012},
  abstract  = {Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.},
  language  = {en}
}
@inproceedings{HartmannKallweitFeldusenetal.2012,
  author    = {Hartmann, Axel and Kallweit, Stephan and Feldusen, Antje and Schr{\"o}der, Wolfgang},
  title     = {Detection of upstream propagating sound waves at buffet flow using high-speed PIV},
  pages     = {14 S. : graph. Darst.},
  year      = {2012},
  language  = {en}
}
@inproceedings{DiltheySchleserPuterman2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Puterman, Moshe},
  title     = {Investigation and improvement of concrete reinforced with epoxy impregnated fabrics},
  series = {Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007},
  booktitle = {Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007},
  publisher = {Kangwoon National Univ.},
  address   = {Chancheon},
  isbn      = {978-89-9600450-9},
  pages     = {725 -- 733},
  year      = {2007},
  language  = {en}
}
@inproceedings{ReisgenSchoeneSchleseretal.2009,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Gries, Thomas and Glowania, Michael},
  title     = {Impregnated textile reinforcements for concrete applications},
  series = {European Coatings Congress : N{\"u}rnberg, Germany, 30.3. - 1.4. 2009},
  booktitle = {European Coatings Congress : N{\"u}rnberg, Germany, 30.3. - 1.4. 2009},
  pages     = {7 S.},
  year      = {2009},
  language  = {en}
}
@inproceedings{SedlacekGesslerSchleseretal.2003,
  author    = {Sedlacek, G. and Geßler, A. and Schleser, Markus and Mund, F. and V{\"o}lling, B.},
  title     = {Verbindungen vorgefertigter Textilbetonbauteile},
  series = {Textile reinforced structures : proceedings of the 2nd Colloquium on Textile Reinforced Structures (CTRS2), Dresden, Germany, 29.9. - 1.10.2003},
  booktitle = {Textile reinforced structures : proceedings of the 2nd Colloquium on Textile Reinforced Structures (CTRS2), Dresden, Germany, 29.9. - 1.10.2003},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  organization    = {Colloquium on Textile Reinforced Structures <2, 2003, Dresden>},
  isbn      = {3-86005-386-8},
  pages     = {481 -- 493},
  year      = {2003},
  language  = {en}
}
@inproceedings{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrej},
  title     = {Application of electron beam welding to fabrication of steel-aluminium dissimilar joint},
  series = {Beam technologies \& laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012},
  booktitle = {Beam technologies \& laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012},
  publisher = {Publ. House},
  address   = {Saint Petersburg},
  pages     = {265 -- 279},
  year      = {2012},
  language  = {en}
}
@inproceedings{ReisgenSchleserAbdurakhmanovetal.2009,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Amdrej V.},
  title     = {Measurement method of electron beam plasma parameters by non-vacuum electron beam welding},
  series = {Beam technologies \& laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009},
  booktitle = {Beam technologies \& laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009},
  editor    = {Turichin, G.},
  publisher = {Politechnical Univ.},
  address   = {Saint Petersburg},
  organization    = {Russian Academy of Science},
  pages     = {259 -- 267},
  year      = {2009},
  language  = {en}
}
@article{RamazaniLiMukherjeeetal.2013,
  author    = {Ramazani, Ali and Li, Yang and Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Abdurakhmanov, Aydemir and Schleser, Markus and Reisgen, Uwe},
  title     = {Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding},
  series = {Computational materials science},
  volume    = {Vol. 68},
  journal   = {Computational materials science},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0801 (E-Book); 0927-0256 (Print)},
  pages     = {107 -- 116},
  year      = {2013},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian},
  title     = {Modelling and visualisation of the GMA process},
  series = {Welding and Cutting},
  volume    = {11},
  journal   = {Welding and Cutting},
  number    = {4},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {1612-3433},
  pages     = {242 -- 249},
  year      = {2012},
  language  = {en}
}
@inproceedings{QuadfliegSchoeneSchleseretal.2012,
  author    = {Quadflieg, Till and Schoene, Jens and Schleser, Markus and Jockenh{\"o}vel, Stefan and Reisgen, Uwe and Gries, Thomas},
  title     = {Shear connectors for hybrid joints of metal and FRP},
  series = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference},
  booktitle = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference},
  editor    = {Heslehurst, Rikard Benton},
  publisher = {Composites Australia},
  address   = {Hawthorne},
  isbn      = {978-0-9873285-0-2},
  pages     = {[152] -- [160]},
  year      = {2012},
  language  = {en}
}
@article{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrey},
  title     = {Measuring of plasma properties induced by non-vacuum electron beam welding},
  series = {Physics of plasma},
  volume    = {19},
  journal   = {Physics of plasma},
  number    = {1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {1089-7674 (E-Journal); 1070-664X (Print)},
  doi       = {10.1063/1.3675874},
  pages     = {1 -- 7},
  year      = {2012},
  abstract  = {Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel's method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.},
  language  = {en}
}
@article{ReisgenOlschokJakobsetal.2012,
  author    = {Reisgen, Uwe and Olschok, Simon and Jakobs, Stefan and Schleser, Markus and Mokrov, Oleg and Rossiter, Eduardo},
  title     = {Laser beam submerged arc hybrid welding},
  series = {Physics procedia},
  volume    = {39},
  journal   = {Physics procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.016},
  pages     = {75 -- 83},
  year      = {2012},
  abstract  = {The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Optimization of laser welding of DP/TRIP steel sheets using statistical approach},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.06.028},
  pages     = {255 -- 262},
  year      = {2012},
  abstract  = {Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box-Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Statistical modeling of laser welding of DP/TRIP steel sheets},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.05.025},
  pages     = {92 -- 101},
  year      = {2012},
  abstract  = {In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box-Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.},
  language  = {en}
}
@inproceedings{ReisgenSchleserSchoeneetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Schoene, Jens and Hegger, Josef and Gallwoszus, J{\"o}rg and Feldmann, Markus and Kopp, Maik and G{\"u}ndel, Max},
  title     = {Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete},
  series = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions},
  booktitle = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions},
  editor    = {Cairns, John W.},
  publisher = {Publisher creations},
  address   = {Manerbio, Brescia},
  isbn      = {978-88-907078-3-4},
  pages     = {893 -- 898},
  year      = {2012},
  language  = {en}
}
@inproceedings{HuberBleckScheiketal.2011,
  author    = {Huber, Fr{\´e}d{\´e}ric and Bleck, Wolfgang and Scheik, Sven and Schleser, Markus and Reisgen, Uwe},
  title     = {Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test},
  series = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings},
  booktitle = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings},
  publisher = {Associazione Italiana di Metallurgia},
  address   = {Mailand},
  organization    = {International Conference on Zinc and Zinc Alloy Coated Steel Sheet <8, 2011, Genua>},
  isbn      = {978-88-85298-82-8},
  pages     = {Paper No. 43},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander},
  title     = {Virtual welding equipment for simulation of GMAW processes with integration of power source regulation},
  series = {Frontiers of materials science},
  volume    = {Vol. 5},
  journal   = {Frontiers of materials science},
  number    = {Iss. 2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2095-0268 (E-Journal); 2095-025X (Print)},
  pages     = {79 -- 89},
  year      = {2011},
  language  = {en}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Reisgen, Uwe and Schleser, Markus},
  title     = {Laser assisted joining of plastic metal hybrids},
  series = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)},
  journal   = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  organization    = {International WLT Conference on Lasers in Manufacturing <6, M{\"u}nchen, 2011>},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  pages     = {370 -- 377},
  year      = {2011},
  language  = {en}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative approach of joining hybrid components},
  series = {Journal of laser applications},
  volume    = {Vol. 23},
  journal   = {Journal of laser applications},
  number    = {Iss. 3},
  publisher = {Laser Institute of America},
  address   = {Orlando, Fla.},
  issn      = {1042-346X},
  pages     = {32007},
  year      = {2011},
  language  = {en}
}
@inproceedings{ReisgenSchleserScheiketal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven and Michaeli, Walter and Gr{\"o}nlund, Oliver and Neuß, Andreas and Wunderle, Johannes and Poprawe, Reinhart and R{\"o}sner, A. and Bobzin, Kirsten and Schl{\"a}fer, Thomas and Theiß, Sebastian and Kutschmann, Pia and Haberstroh, Edmund and Flock, Dustin and B{\"u}hrig-Polaczek, Andreas and Jakob, M.},
  title     = {Novel process chains for the production of plastics/metal-hybrids},
  series = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011},
  booktitle = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011},
  editor    = {Thoben, Klaus-Dieter},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {Forschungsinstitut f{\"u}r Rationalisierung <Aachen> ; International Conference on Concurrent Enterprising <17, 2011, Aachen>},
  isbn      = {978-1-457-70772-8 ; 978-3-943024-05-0},
  pages     = {596 -- 604},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel},
  series = {ISIJ international},
  volume    = {Vol. 51},
  journal   = {ISIJ international},
  number    = {No. 3},
  publisher = {ISIJ},
  address   = {Tōkyō},
  organization    = {Iron and Steel Institute of Japan (ISIJ)},
  issn      = {1347-5460 (E-Journal); 0915-1559 (Print)},
  pages     = {429 -- 434},
  year      = {2011},
  language  = {en}
}
@article{GlowaniaGriesSchoeneetal.2011,
  author    = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative coating technology for textile reinforcements of concrete applications},
  series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  journal   = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  organization    = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>},
  isbn      = {978-3-03785-008-4},
  issn      = {1013-9826 (E-Journal) ; 0252-1059 (Print)},
  pages     = {167 -- 173},
  year      = {2011},
  language  = {en}
}
@inproceedings{ReisgenSchleserAbdurakhmanovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Turichin, Gleb and Valdaitseva, Elena and Bach, Friedrich-Wilhelm and Hassel, Thomas and Beniyashi, Alexander},
  title     = {Investigation of factors for defect-free weld formation by non-vacuum electron beam welding},
  series = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine},
  booktitle = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine},
  publisher = {Paton Publ. House},
  address   = {Kiev},
  pages     = {104 -- 109},
  year      = {2011},
  language  = {en}
}
@article{MukherjeeRamazaniYangetal.2011,
  author    = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization of gas metal arc welded hot rolled DP600 steel},
  series = {Steel research international},
  volume    = {Vol. 82},
  journal   = {Steel research international},
  number    = {Iss. 12},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1869-344X (E-Book); 1611-3683 (Print)},
  pages     = {1408 -- 1416},
  year      = {2011},
  language  = {en}
}
@article{MukherjeePrahlBlecketal.2010,
  author    = {Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  doi       = {10.1002/mawe.201000692},
  pages     = {972 -- 983},
  year      = {2010},
  abstract  = {The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.},
  language  = {en}
}
@inproceedings{ReisgenSchoeneSchleseretal.2010,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Jerabek, Jakub and Keil, Allessandra},
  title     = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior},
  series = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  booktitle = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  editor    = {Brameshuber, Wolfgang},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference of Textile Reinforced Concrete <2, 2010, Aachen>},
  isbn      = {978-2-35158-106-3},
  pages     = {153 -- 162},
  year      = {2010},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets},
  series = {Journal of materials processing technology},
  volume    = {210},
  journal   = {Journal of materials processing technology},
  number    = {15},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-0136},
  doi       = {http10.1016/j.jmatprotec.2010.08.003},
  pages     = {2188 -- 2196},
  year      = {2010},
  abstract  = {Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking-Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels},
  series = {Applied surface science},
  volume    = {257},
  journal   = {Applied surface science},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-4332 (E-Journal); 0169-4332 (Print)},
  doi       = {10.1016/j.apsusc.2010.08.042},
  pages     = {1401 -- 1406},
  year      = {2010},
  abstract  = {The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.},
  language  = {en}
}
@article{AhmedReisgenSchleseretal.2010,
  author    = {Ahmed, Essam and Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg},
  title     = {On formability of tailor laser welded blanks of DP/TRIP steel sheets},
  series = {Science and technology of welding and joining},
  volume    = {15},
  journal   = {Science and technology of welding and joining},
  number    = {5},
  publisher = {Maney},
  address   = {Leeds},
  issn      = {1743-2936},
  doi       = {10.1179/136217110X12731414739754},
  pages     = {337 -- 342},
  year      = {2010},
  abstract  = {This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.},
  language  = {en}
}
@inproceedings{SchoeneReisgenSchleseretal.2010,
  author    = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav},
  title     = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior},
  series = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings},
  booktitle = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings},
  editor    = {Fisher, Gregor},
  publisher = {Technical University of Denmark, Dept. of Civil Engineering},
  address   = {Lyngby},
  organization    = {PhD Symposium in Civil Engineering <8, 2010, Lyngby> ; International Federation for Structural Concrete},
  isbn      = {9788778773012},
  pages     = {383 -- 388},
  year      = {2010},
  language  = {en}
}
@inproceedings{GoettscheHinschWittwer1992,
  author    = {G{\"o}ttsche, Joachim and Hinsch, Andreas and Wittwer, Volker},
  title     = {Electrochromic and optical properties of mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique},
  series = {Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Lab{\`e}ge. (SPIE proceedings series. 1728)},
  booktitle = {Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Lab{\`e}ge. (SPIE proceedings series. 1728)},
  editor    = {Hugo-Le Goff, Anne},
  publisher = {SPIE},
  address   = {Bellingham, Wash.},
  isbn      = {0-8194-0901-4},
  pages     = {13 -- 25},
  year      = {1992},
  language  = {en}
}
@inproceedings{ChudobaKonradSchleseretal.2009,
  author    = {Chudoba, Rostislav and Konrad, Martin and Schleser, Markus and Meskouris, Konstantin and Reisgen, Uwe},
  title     = {Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns},
  series = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009},
  booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009},
  editor    = {Curbach, Manfred},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  isbn      = {978-3-86780-122-5},
  pages     = {87 -- 98},
  year      = {2009},
  language  = {en}
}
@article{DiltheySchleserFeldmannetal.2008,
  author    = {Dilthey, Ulrich and Schleser, Markus and Feldmann, Martin and Pak, Daniel and Geßler, Achim},
  title     = {Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts},
  series = {Cement and concrete composites},
  volume    = {Vol. 30},
  journal   = {Cement and concrete composites},
  number    = {iss. 2},
  issn      = {0958-9465},
  pages     = {82 -- 87},
  year      = {2008},
  language  = {en}
}
@inproceedings{DiltheySchleserHeggeretal.2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hegger, Josef and Voss, Stefan},
  title     = {Load-bearing behaviour of polymer-impregnated textiles in concrete},
  series = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)},
  booktitle = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)},
  editor    = {Reinhardt, Hans W.},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Workshop on High Performance Fiber Reinforced Cement Composites <5, 2007, Mainz>},
  isbn      = {978-2-35158-046-2},
  pages     = {183 -- 192},
  year      = {2007},
  language  = {en}
}
@inproceedings{SchleserDiltheyMundetal.2007,
  author    = {Schleser, Markus and Dilthey, Ulrich and Mund, F. and B{\"o}hm, Stefan},
  title     = {Improvement of textile reinforced concrete by use of polymers},
  series = {Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)},
  booktitle = {Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)},
  editor    = {Czarnecki, Lech and Garbacz, Andrzej},
  publisher = {Aedificatio Publ.},
  address   = {Freiburg},
  isbn      = {978-3-931681-89-0},
  pages     = {153 -- 162},
  year      = {2007},
  language  = {en}
}
@inproceedings{DiltheySchleserChudobaetal.2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Chudoba, Rostislav and Konrad, Martin},
  title     = {Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics},
  series = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007},
  booktitle = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007},
  editor    = {Triantafillou, T. C.},
  publisher = {Univ.},
  address   = {Patras},
  organization    = {International Symposium on Fibre-Reinforced Polymer Reinforcement for Concrete Structures <8, 2007, Patras>},
  isbn      = {9608969107},
  pages     = {456 -- 457},
  year      = {2007},
  language  = {en}
}
@article{FeldmannPakGessleretal.2006,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Dilthey, Ulrich and Schleser, Markus},
  title     = {Bonded connections for textile reinforced concrete structures},
  series = {Cailiao-gongcheng = Journal of materials engineering},
  journal   = {Cailiao-gongcheng = Journal of materials engineering},
  number    = {Special iss.},
  issn      = {1001-4381},
  pages     = {123 -- 127},
  year      = {2006},
  language  = {en}
}
@article{SchleserWalkLaufferRaupachetal.2006,
  author    = {Schleser, Markus and Walk-Lauffer, Bernd and Raupach, Michael and Dilthey, Ulrich},
  title     = {Application of polymers for textile-reinforced concrete},
  series = {Journal of materials in civil engineering : properties, applications, durability},
  volume    = {18},
  journal   = {Journal of materials in civil engineering : properties, applications, durability},
  number    = {5},
  issn      = {0899-1561},
  pages     = {670 -- 676},
  year      = {2006},
  language  = {en}
}
@inproceedings{DiltheySchleser2006,
  author    = {Dilthey, Ulrich and Schleser, Markus},
  title     = {Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles},
  series = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  booktitle = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  editor    = {Barroso de Aguiar, Jose and Jalali, Said and Camoes, Aires and Ferrera, Rui Miguel},
  publisher = {Universidade do Minho, Departamento de Engenharia Civil},
  address   = {Guimar{\~a}es},
  organization    = {International Symposium in Concrete <2006, Guimar{\~a}es)},
  isbn      = {972-99179-1-4},
  pages     = {185 -- 192},
  year      = {2006},
  language  = {en}
}
@inproceedings{PakPiegelerFeldmannetal.2006,
  author    = {Pak, Daniel and Piegeler, D. and Feldmann, Markus and Schleser, Markus and Dilthey, Ulrich},
  title     = {Hybrid joints of textile reinforced concrete parts - designed for assembly},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {181 -- 190},
  year      = {2006},
  language  = {en}
}
@inproceedings{RaupachOrlowskyBuettneretal.2006,
  author    = {Raupach, Michael and Orlowsky, Jeannette and B{\"u}ttner, T. and Dilthey, Ulrich and Schleser, Markus},
  title     = {Epoxy-impregnated textiles in concrete - load bearing capacity and durability},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {77 -- 88},
  year      = {2006},
  language  = {en}
}
@inproceedings{DiltheySchleserMoelleretal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and M{\"o}ller, M. and Weichhold, O.},
  title     = {Application of polymers in textile reinforced concrete : from the interface to construction elements},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {55 -- 64},
  year      = {2006},
  language  = {en}
}
@inproceedings{KolkmannGriesSchleseretal.2005,
  author    = {Kolkmann, Annette and Gries, Thomas and Schleser, Markus and Dilthey, Ulrich},
  title     = {Innovative yarn structures and coatings for textile reinforced concrete},
  series = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main},
  booktitle = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main},
  address   = {Frankfurt a.M.},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {en}
}
@article{DiltheyBrandenburgSchleser2004,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Dispensing and application of unfilled adhesives in the micro range},
  series = {Welding and cutting. 3 (2004), H. 4},
  journal   = {Welding and cutting. 3 (2004), H. 4},
  issn      = {1612-3433},
  pages     = {250 -- 254},
  year      = {2004},
  language  = {en}
}
@inproceedings{DiltheyMundRaupachetal.2004,
  author    = {Dilthey, Ulrich and Mund, F. and Raupach, Michael and Schleser, Markus and Walk-Lauffer, Bernd},
  title     = {Improvement of textile reinforced concrete by polymer additives},
  series = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch},
  booktitle = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch},
  publisher = {BAM},
  address   = {Berlin},
  isbn      = {3-00-013706-8},
  pages     = {469 -- 476},
  year      = {2004},
  language  = {en}
}
@inproceedings{WalkLaufferRaupachDilgeretal.2004,
  author    = {Walk-Lauffer, Bernd and Raupach, Michael and Dilger, Klaus and B{\"o}hm, Stefan and Mundt, F. and Dilthey, Ulrich and Schleser, Markus},
  title     = {The interconnection between inner filaments of textile reinforcement by means of polymer modified concrete},
  series = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  booktitle = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  publisher = {Liguori},
  address   = {Napoli},
  pages     = {150 -- 159},
  year      = {2004},
  language  = {en}
}
@inproceedings{AnikFrohberg1989,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamic behaviour of oxygen in molten metallic alloys},
  series = {Thermochemistry of alloys : recent developments of experimental methods ; [proceedings of the NATO Advanced Study Institute on Thermochemistry of Alloys, Recent Developments of Experimental Methods, Kiel, F.R.G., August 17 - 27, 1987]. - (NATO ASI series : Series C ; 286)},
  booktitle = {Thermochemistry of alloys : recent developments of experimental methods ; [proceedings of the NATO Advanced Study Institute on Thermochemistry of Alloys, Recent Developments of Experimental Methods, Kiel, F.R.G., August 17 - 27, 1987]. - (NATO ASI series : Series C ; 286)},
  editor    = {Brodowsky, Horst},
  publisher = {Springer},
  address   = {Dordrecht [u.a.]},
  isbn      = {0-7923-0434-9},
  pages     = {419 -- 428},
  year      = {1989},
  language  = {en}
}
@article{WangAnikFrohberg1987,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics of oxygen in the lead-antimony system at 1173 K},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {40},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {6},
  issn      = {0044-2658},
  pages     = {316 -- 319},
  year      = {1987},
  language  = {en}
}
@article{AnikFrohberg1988,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics of oxygen in the copper-antimony system at 1473K},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {41},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {10},
  issn      = {0044-2658},
  pages     = {498 -- 501},
  year      = {1988},
  language  = {en}
}
@article{WangAnikFrohberg1988,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {79},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {5},
  issn      = {0044-3093},
  pages     = {336 -- 339},
  year      = {1988},
  language  = {en}
}
@article{AnikFrohberg1987,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {91},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {7},
  issn      = {0940-483X},
  pages     = {790 -- 794},
  year      = {1987},
  language  = {en}
}
@article{FrohbergAnik1985,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Thermodynamic relations between component activities and gas solubilities in binary metallic systems},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {89},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {2},
  issn      = {0940-483X},
  pages     = {130 -- 134},
  year      = {1985},
  language  = {en}
}
@article{AnikFrohbergKapoor1983,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Experiments and theoretical considerations on the solution of oxygen in binary metal alloys},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {87},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {12},
  issn      = {0005-9021},
  pages     = {1201 -- 1204},
  year      = {1983},
  language  = {en}
}
@article{AnikFrohberg1984,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {88},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {8},
  issn      = {0940-483X},
  pages     = {707 -- 710},
  year      = {1984},
  language  = {en}
}
@article{AnikFrohbergKapoor1983,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Prediction of thermodynamic properties of oxygen in binary metallic solvents},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {6},
  issn      = {0044-3093},
  pages     = {372 -- 375},
  year      = {1983},
  language  = {en}
}
@article{AnikKapoorFrohberg1983,
  author    = {Anik, Sabri and Kapoor, Madan Lal and Frohberg, Martin G.},
  title     = {Thermodynamic behaviour of oxygen in molten substitutional alloy solvents},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {1},
  issn      = {0044-3093},
  pages     = {53 -- 58},
  year      = {1983},
  language  = {en}
}
@article{AnikFrohberg1983,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {8},
  issn      = {0044-3093},
  pages     = {530 -- 534},
  year      = {1983},
  language  = {en}
}
@article{FrohbergAnik1983,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {10},
  issn      = {0044-3093},
  pages     = {665 -- 666},
  year      = {1983},
  language  = {en}
}
@article{AnikFrohberg1984,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {75},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {8},
  issn      = {0044-3093},
  pages     = {586 -- 589},
  year      = {1984},
  language  = {en}
}
@article{FrohbergAnik1985,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {The calculation of component activities of binary metallic melts from their gas solubilities},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {76},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {2},
  issn      = {0044-3093},
  pages     = {135 -- 137},
  year      = {1985},
  language  = {en}
}
@techreport{AdomeitWillms1984,
  author    = {Adomeit, G. and Willms, Herbert},
  title     = {Experimental investigation of the acceleration of deflagration in wake flow : final report. - (Euratom-publications-EUR ; 9593 : Nuclear science and technology)},
  publisher = {Commission of the European Communities},
  address   = {Luxembourg},
  isbn      = {92-825-4699-3},
  pages     = {III, 119 S.},
  year      = {1984},
  language  = {en}
}
@inproceedings{AdomeitWillms1984,
  author    = {Adomeit, G. and Willms, Herbert},
  title     = {Experimental investigation of the acceleration of deflagration in wake flow},
  series = {Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities' Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1-3 October 1984 / Commission of the European Communities},
  booktitle = {Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities' Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1-3 October 1984 / Commission of the European Communities},
  editor    = {Skupinski, Edwin},
  publisher = {Graham \& Trotman [u.a.]},
  address   = {London Gaithersburg, Md.},
  isbn      = {0-86010-678-0},
  pages     = {294 -- 304},
  year      = {1984},
  language  = {en}
}
@inproceedings{BeerHaidnWillms1995,
  author    = {Beer, Stefan and Haidn, O.J. and Willms, Herbert},
  title     = {Control of stoichiometric propellant supply in an H2/O2-spinning reserve system},
  series = {Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)},
  booktitle = {Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)},
  editor    = {Carvalho, Maria da Gra{\c{c}}a},
  publisher = {Gordon and Breach},
  address   = {Basel [u.a.]},
  isbn      = {2-88124-619-2},
  pages     = {825 -- 838},
  year      = {1995},
  language  = {en}
}
@article{AbdelLatifPeekenBenner1985,
  author    = {Abdel-Latif, Lotfie Ahmed and Peeken, Heinz and Benner, Joachim},
  title     = {Thermohydrodynamic analysis of thrust-bearing with circular pads running on bubbly oil (BTHD-theory)},
  series = {Journal of tribology},
  volume    = {107},
  journal   = {Journal of tribology},
  number    = {4},
  isbn      = {0742-4787},
  issn      = {1528-8897},
  pages     = {527 -- 537},
  year      = {1985},
  language  = {en}
}
@inproceedings{PeekenTroederBenneretal.1986,
  author    = {Peeken, Heinz and Troeder, Christoph and Benner, Joachim and Platt, Werner},
  title     = {A new approach to describe the mechanical performance of flexible couplings in drive systems},
  series = {Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo},
  booktitle = {Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo},
  publisher = {IFToMM},
  address   = {Tokyo},
  pages     = {159 -- 163},
  year      = {1986},
  language  = {en}
}
@inproceedings{FerreinKallweitLautermann2012,
  author    = {Ferrein, Alexander and Kallweit, Stephan and Lautermann, Mark},
  title     = {Towards an autonomous pilot system for a tunnel boring machine},
  series = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  booktitle = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4673-5183-6},
  year      = {2012},
  language  = {en}
}
@article{GebhardtFateri2013,
  author    = {Gebhardt, Andreas and Fateri, Miranda},
  title     = {3D printing and its applications},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {10},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-35626},
  year      = {2013},
  abstract  = {Eine zunehmende Anzahl von Artikeln in Publikumszeitschriften und Journalen r{\"u}ckt die direkte Herstellung von Bauteilen und Figuren immer mehr in das Bewusstsein einer breiten {\"O}ffentlichkeit. Leider ergibt sich nur selten ein einigermaßen vollst{\"a}ndiges Bild davon, wie und in welchen Lebensbereichen diese Techniken unseren Alltag ver{\"a}ndern werden. Das liegt auch daran, dass die meisten Artikel sehr technisch gepr{\"a}gt sind und sich nur punktuell auf Beispiele st{\"u}tzen. Dieser Beitrag geht von den Bed{\"u}rfnissen der Menschen aus, wie sie z.B. in der Maslow'schen Bed{\"u}rfnispyramide strukturiert dargestellt sind und unterstreicht dadurch, dass 3D Printing (oder Additive Manufacturing resp. Rapid Prototyping) bereits alle Lebensbereiche erfasst hat und im Begriff ist, viele davon zu revolutionieren.},
  language  = {en}
}
@article{FateriHoetterGebhardt2012,
  author    = {Fateri, Miranda and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas},
  title     = {Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting},
  series = {Physics Procedia},
  volume    = {39},
  journal   = {Physics Procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.062},
  pages     = {464 -- 470},
  year      = {2012},
  abstract  = {Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.},
  language  = {en}
}
@article{HaselgruberMautnerThiele2010,
  author    = {Haselgruber, Nikolaus and Mautner, Karin and Thiele, Jan},
  title     = {Usage Space Analysis for Reliability Testing},
  series = {Quality and Reliability Engineering International},
  volume    = {26},
  journal   = {Quality and Reliability Engineering International},
  number    = {8},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1099-1638},
  doi       = {10.1002/qre.1155},
  pages     = {877 -- 885},
  year      = {2010},
  abstract  = {During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety.},
  language  = {en}
}
@book{Gebhardt2011,
  author    = {Gebhardt, Andreas},
  title     = {Understanding Additive Manufacturing : Rapid Prototyping - Rapid Tooling - Rapid Manufacturing},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-42552-1},
  pages     = {VIII, 164 S. : farb. Ill.},
  year      = {2011},
  language  = {en}
}
@article{DuesGebhardtKallweitetal.1994,
  author    = {Dues, M. and Gebhardt, Andreas and Kallweit, Stephan and Scheffler, T. and Siekmann, H. and Uchiyama, T.},
  title     = {Flow Visualization in a Cavitating Flow},
  series = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  journal   = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  publisher = {Kernforschungszentrum Karlsruhe},
  address   = {Karlsruhe},
  pages     = {391 -- 402},
  year      = {1994},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Scalise, L.},
  title     = {PIV Measurements with high temporal Resolution behind Artificial Heart Valves / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P.},
  series = {Proceedings of the 6th International Symposium on Particle Image Velocimetry},
  journal   = {Proceedings of the 6th International Symposium on Particle Image Velocimetry},
  publisher = {Caltech},
  address   = {Pasadena, CA},
  year      = {2005},
  language  = {en}
}
@article{GebhardtSchmidtHoetteretal.2010,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick},
  title     = {Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry},
  series = {Physics Procedia},
  volume    = {5},
  journal   = {Physics Procedia},
  number    = {2},
  isbn      = {1875-3892},
  pages     = {543 -- 549},
  year      = {2010},
  language  = {en}
}
@article{KallweitUchiyamaSiekmann1998,
  author    = {Kallweit, Stephan and Uchiyama, R. and Siekmann, H.},
  title     = {Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H.},
  series = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  journal   = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  isbn      = {1542-3034},
  pages     = {49 -- 59},
  year      = {1998},
  language  = {en}
}
@article{KallweitSchimpf2003,
  author    = {Kallweit, Stephan and Schimpf, Axel},
  title     = {Photogrammetric Particle Image Velocimetry / Schimpf, Axel ; Kallweit, Stephan},
  series = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...},
  journal   = {Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-21423-2},
  pages     = {295},
  year      = {2003},
  language  = {en}
}
@article{KallweitDuesSiekmann1994,
  author    = {Kallweit, Stephan and Dues, M. W. and Siekmann, H. E.},
  title     = {Spectral Analysis of Pressure Fluctuations and Velocity Fields as Investigated on Propeller Pumps / Dues, M. W. ; Kallweit, S. D. ; Siekmann, H. E.},
  series = {Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.},
  journal   = {Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.},
  pages     = {98 -- 112},
  year      = {1994},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2008,
  author    = {Kallweit, Stephan and Kaminsky, Radoslav and Rossi, Massimiliano and Morbiducci, Umberto},
  title     = {PIV Measurements of Flows in Artificial Heart Valves / Kaminsky, Radoslav ; Kallweit, Stephan ; Rossi, Massimiliano ; Morbiducci, Umberto ; Scalise, Lorenzo},
  series = {Particle Image Velocimetry - New Developments and Recent Applications},
  journal   = {Particle Image Velocimetry - New Developments and Recent Applications},
  isbn      = {978-3-540-73528-1},
  pages     = {55 -- 72},
  year      = {2008},
  language  = {en}
}
@article{KallweitHelbingOrglmeisteretal.1994,
  author    = {Kallweit, Stephan and Helbing, M. and Orglmeister, R. and Siekmann, H. E.},
  title     = {Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J.},
  series = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  journal   = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  address   = {Toulouse},
  pages     = {87 -- 94},
  year      = {1994},
  language  = {en}
}
@article{KallweitDuesSiekmann1994,
  author    = {Kallweit, Stephan and Dues, M. and Siekmann, H.},
  title     = {Particle-Image-Velocimetry (PIV) in rotierenden Maschinen / Dues, M. ; Kallweit, S. ; Siekmann, H.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8265-0162-4},
  pages     = {19.1 -- 19-5},
  year      = {1994},
  language  = {en}
}
@article{KallweitVanlanduitVanherzeeleetal.2007,
  author    = {Kallweit, Stephan and Vanlanduit, S. and Vanherzeele, J. and Brouns, M.},
  title     = {Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.},
  series = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  journal   = {PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007},
  pages     = {1 -- 14},
  year      = {2007},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {2D PIV Study of the flow downstream : Two prototypes of a ney monoleaflet artificial aortic heart valve prosthesis / Kaminsky, R. ; Kramm, K. ; Weber, H. J. ; Simons, A. P. ; Kallweit, S. ; Verdonck, P. R.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {921},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {3D PIV measurements of prosthetic heart valve dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Castellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {868},
  year      = {2005},
  language  = {en}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {946},
  year      = {2005},
  language  = {en}
}
@article{KallweitWillertDuesetal.2008,
  author    = {Kallweit, Stephan and Willert, Chris and Dues, Michael and M{\"u}ller, Ulrich},
  title     = {PIV for Volume Flow Metering / Kallweit, Stephan ; Willert, Chris ; Dues, Michael ; M{\"u}ller, Ulrich ; Lederer, Thomas},
  pages     = {6 S.},
  year      = {2008},
  language  = {en}
}