@article{Siepmann1999,
  author    = {Siepmann, Thomas},
  title     = {Exploitation Plan of the TELEflow Project},
  address   = {Brussels},
  year      = {1999},
  language  = {en}
}
@article{SiepmannSchuhLevering1998,
  author    = {Siepmann, Thomas and Schuh, G. and Levering, V.},
  title     = {PROPLAN / Schuh, G.; Siepmann, Th.; Levering, V.},
  series = {Handbook on architectures of information systems : with 24 tables / Peter Bernus ... (ed.)},
  journal   = {Handbook on architectures of information systems : with 24 tables / Peter Bernus ... (ed.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-64453-9},
  pages     = {IX, 834 S. : graph. Darst.},
  year      = {1998},
  language  = {en}
}
@article{SiepmannRupietta1993,
  author    = {Siepmann, Thomas and Rupietta, D.},
  title     = {Closer to the customer with computerized product support},
  series = {Technische Mitteilungen Krupp (1993)},
  journal   = {Technische Mitteilungen Krupp (1993)},
  address   = {Essen},
  year      = {1993},
  language  = {en}
}
@article{KaemperKurzawaSchmittetal.1986,
  author    = {K{\"a}mper, Klaus-Peter and Kurzawa, R. and Schmitt, W. and G{\"u}ntherodt, G.},
  title     = {Spin-resolved photoemission study of in situ grown epitaxial Fe layers on W(110). Kurzawa, R.; K{\"a}mper, K.-P.; Schmitt, W.; G{\"u}ntherodt, G.},
  series = {Solid State Communications. 60 (1986), H. 10},
  journal   = {Solid State Communications. 60 (1986), H. 10},
  isbn      = {0038-1098},
  pages     = {777 -- 780},
  year      = {1986},
  language  = {en}
}
@article{Krause1991,
  author    = {Krause, Gregor},
  title     = {High Field Phenomena of Polymeric Insulation Investigated at PE Needle-Plane Specimen},
  series = {Seventh International Symposium on High Voltage Engineering : Dresden, August 26 - 30, 1991 / Technische Universit{\"a}t Dresden},
  journal   = {Seventh International Symposium on High Voltage Engineering : Dresden, August 26 - 30, 1991 / Technische Universit{\"a}t Dresden},
  publisher = {TU Dresden},
  address   = {Dresden},
  year      = {1991},
  language  = {en}
}
@article{KrauseNeubertPietsch1990,
  author    = {Krause, Gregor and Neubert, R. and Pietsch, R.},
  title     = {Investigations of Electrical Aging in Polymers under High AC-Field Strength},
  series = {1990 annual report : October 28 - October 31, 1990 / sponsored by the IEEE Dielectrics and Electrical Insulation Society},
  journal   = {1990 annual report : October 28 - October 31, 1990 / sponsored by the IEEE Dielectrics and Electrical Insulation Society},
  publisher = {IEEE Service Center},
  address   = {Piscataway, N.J},
  pages     = {716 S : Ill., graph. Darst.},
  year      = {1990},
  language  = {en}
}
@article{KrauseGoettlichMoelleretal.1989,
  author    = {Krause, Gregor and G{\"o}ttlich, S. and M{\"o}ller, K. and Meurer, D.},
  title     = {Space Charge Phenomena in Partially Crystalline Polymers: On-Line Measurement of Charge Carrier Motion under High AC-Field Strength / G. Krause, S. G{\"o}ttlich, K. M{\"o}ller, D. Meurer},
  series = {Proceedings of the 3rd International Conference on Conduction and Breakdown in Solid Dielectrics : Trondheim, Norway ... 1989},
  journal   = {Proceedings of the 3rd International Conference on Conduction and Breakdown in Solid Dielectrics : Trondheim, Norway ... 1989},
  publisher = {IEEE},
  address   = {Piscataway, N.J.},
  pages     = {IX, 607 S.},
  year      = {1989},
  language  = {en}
}
@article{KrauseMoellerMeurer1989,
  author    = {Krause, Gregor and M{\"o}ller, K. and Meurer, D.},
  title     = {Dielectric phenomena in semicrystalline polymers},
  series = {IEEE Transaction on Electrical Insulation. Vol. 24 (1989), H. No. 2},
  journal   = {IEEE Transaction on Electrical Insulation. Vol. 24 (1989), H. No. 2},
  pages     = {215 -- 222},
  year      = {1989},
  language  = {en}
}
@article{KrauseMeurerKlee1989,
  author    = {Krause, Gregor and Meurer, D. and Klee, D.},
  title     = {Space charge formation related to the morphology of polymers},
  series = {IEEE Transaction on Electrical Insulation. Vol. 24 (1989), H. No. 3},
  journal   = {IEEE Transaction on Electrical Insulation. Vol. 24 (1989), H. No. 3},
  pages     = {215 -- 222},
  year      = {1989},
  language  = {en}
}
@article{KrauseSchuppeSaureetal.1988,
  author    = {Krause, Gregor and Schuppe, W.D. and Saure, M. and Andress, H.},
  title     = {Sensitive Analytical and Physical Methods for Diagnosis of Variations in Polyolefin Plaques and Cable Insulations / W.D. Schuppe, M. Saure, H. Andress, K. M{\"o}ller, D. Meurer, G. Krause},
  series = {Proceedings of the 32nd session : 28th August - 3rd September.},
  journal   = {Proceedings of the 32nd session : 28th August - 3rd September.},
  year      = {1988},
  language  = {en}
}
@article{KrauseMeurerKlee1988,
  author    = {Krause, Gregor and Meurer, D. and Klee, D.},
  title     = {Space Charge Formation Related to the Morphology of Polymers},
  series = {ISE 6 : 6th International symposium on electrets : Papers},
  journal   = {ISE 6 : 6th International symposium on electrets : Papers},
  publisher = {IEEE},
  address   = {Piscataway, NY},
  pages     = {XIX, 688 S. : graph. Darst.},
  year      = {1988},
  language  = {en}
}
@article{KrauseFruth1988,
  author    = {Krause, Gregor and Fruth, B.},
  title     = {Dielectric Properties of Polyolefins Stressed by High Electrical Fields / Fruth, B. ; Krause, G.},
  series = {Plenary lectures and contributions presented at the International Symposium on Polymer Materials : held in San Sebastian (Donostia), Spain, 31 August - 4 September, 1987 / symposium ed. G. M. Guzm{\´a}n ; A. Santamaria},
  journal   = {Plenary lectures and contributions presented at the International Symposium on Polymer Materials : held in San Sebastian (Donostia), Spain, 31 August - 4 September, 1987 / symposium ed. G. M. Guzm{\´a}n ; A. Santamaria},
  publisher = {Huethig \& Wepf},
  address   = {Basel},
  isbn      = {3-85739-220-7},
  pages     = {XIV, 629 S.},
  year      = {1988},
  language  = {en}
}
@article{Wrede1996,
  author    = {Wrede, Oliver},
  title     = {Mnemotechnik in graphischen Benutzeroberfl{\"a}chen},
  series = {Form <Basel> / Form-Diskurs : Zeitschrift f{\"u}r Design und Theorie. 1 (1996), H. 2},
  journal   = {Form <Basel> / Form-Diskurs : Zeitschrift f{\"u}r Design und Theorie. 1 (1996), H. 2},
  year      = {1996},
  language  = {en}
}
@article{Fabo2002,
  author    = {Fabo, Sabine},
  title     = {Welcome to the training: Actionist Respoke interaktiv by Michael Jonoschek und R{\"u}diger Schl{\"o}mer},
  series = {Bilder-Codes : Internationaler Medienkunstpreis 2002},
  journal   = {Bilder-Codes : Internationaler Medienkunstpreis 2002},
  editor    = {K{\"o}nches, Barbara},
  publisher = {ZKM},
  address   = {Karlsruhe},
  isbn      = {3-928201-28-X},
  pages     = {41 -- 48},
  year      = {2002},
  language  = {en}
}
@article{HagemannBachmannLadeetal.1995,
  author    = {Hagemann, Hans-J{\"u}rgen and Bachmann, P. K. and Lade, H. and Leers, D.},
  title     = {Thermal properties of C/H-, C/H/O-, C/H/N- and C/H/X-grown polycrystalline CVD diamond. P. K. Bachmann, H. J. Hagemann, H. Lade, ...},
  series = {Diamond and Related Material. Vol 4. (1995), H. Issue 5-6},
  journal   = {Diamond and Related Material. Vol 4. (1995), H. Issue 5-6},
  publisher = {Elsevier Science},
  address   = {New York, NY [u.a.]},
  pages     = {820 -- 826},
  year      = {1995},
  language  = {en}
}
@article{HagemannBackhausGoessner2002,
  author    = {Hagemann, Hans-J{\"u}rgen and Backhaus, U. and Goessner, S.},
  title     = {Collaborative eLearning Concepts for University Level Online Laboratory Courses in Engineering. U. Backhaus, S. Goessner, H. J. Hagemann},
  series = {Proceedings Online Educa Berlin: 8th International Conference on Technology Supported Learning \& Training. 2002},
  journal   = {Proceedings Online Educa Berlin: 8th International Conference on Technology Supported Learning \& Training. 2002},
  pages     = {62 -- 66},
  year      = {2002},
  language  = {en}
}
@article{KrauseFruth1987,
  author    = {Krause, Gregor and Fruth, Bernhard},
  title     = {Dielectric Properties of Polyolefins Stressed by High Electrical Fields. Fruth, B. ; Krause, G.},
  year      = {1987},
  language  = {en}
}
@article{HagemannBreitschuhGraberetal.2004,
  author    = {Hagemann, Hans-J{\"u}rgen and Breitschuh, S. and Graber, S. and Schmitz, G{\"u}nter},
  title     = {Internet Laboratory Courses with Remote Access and Control of Real Measurements on Sensors and Electronic Components},
  series = {Mechatronics \& Robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [APS - European Centre for Mechatronics]. P. Drews (ed.)},
  journal   = {Mechatronics \& Robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [APS - European Centre for Mechatronics]. P. Drews (ed.)},
  publisher = {Eysoldt},
  address   = {Aachen},
  isbn      = {3-938153-30-X},
  pages     = {1280 -- 1284},
  year      = {2004},
  language  = {en}
}
@article{Ritz2000,
  author    = {Ritz, Thomas},
  title     = {Information Channels},
  series = {Information Technology. Nr. 52 (2000), H. 08. Mai 2000},
  journal   = {Information Technology. Nr. 52 (2000), H. 08. Mai 2000},
  pages     = {15 -- 15},
  year      = {2000},
  language  = {en}
}
@article{Ritz2002,
  author    = {Ritz, Thomas},
  title     = {Modelling mass customization of digital news services},
  series = {International journal of e-business strategy management},
  volume    = {3},
  journal   = {International journal of e-business strategy management},
  number    = {3},
  year      = {2002},
  language  = {en}
}
@article{Ritz2000,
  author    = {Ritz, Thomas},
  title     = {Personalized information services : an electronic information commodity and its production},
  series = {International Journal of E-Business Strategy Management},
  volume    = {2},
  journal   = {International Journal of E-Business Strategy Management},
  number    = {2},
  issn      = {1467-0305},
  year      = {2000},
  language  = {en}
}
@article{Ritz2002,
  author    = {Ritz, Thomas},
  title     = {Mass Customized Production of Information Services - The combination of economies-of-scale with economies-of-scope},
  series = {Media firms : structures, operations, and performance ; [World Media Economics Conference, 5th : 2002 : Turku, Finland] / ed. by Robert G. Picard},
  journal   = {Media firms : structures, operations, and performance ; [World Media Economics Conference, 5th : 2002 : Turku, Finland] / ed. by Robert G. Picard},
  publisher = {Erlbaum},
  address   = {Mahwah, NJ [u.a.]},
  isbn      = {0-8058-4165-2},
  pages     = {267 S. : graph. Darst.},
  year      = {2002},
  language  = {en}
}
@article{Ritz2002,
  author    = {Ritz, Thomas},
  title     = {Modelling Production of personalized information services and their delivery on multiple distribution channels},
  series = {Personalization Techniques in Electronic Publishing on the Web. Workshop in the Framework of the 2nd international conference on Adaptive Hypermedia and adaptive web based systems (AH2002) in Malaga (ES)},
  journal   = {Personalization Techniques in Electronic Publishing on the Web. Workshop in the Framework of the 2nd international conference on Adaptive Hypermedia and adaptive web based systems (AH2002) in Malaga (ES)},
  pages     = {19 -- 30},
  year      = {2002},
  language  = {en}
}
@article{Ritz2002,
  author    = {Ritz, Thomas},
  title     = {Personalized Information Services: Production and Distribution of these Services employing Mass-Customization},
  year      = {2002},
  language  = {en}
}
@article{HeuermannStolleSchiek1995,
  author    = {Heuermann, Holger and Stolle, Reinhard and Schiek, Burkhard},
  title     = {Novel Algorithms for FMCW Range Finding with Microwaves. Stolle, R.; Heuermann, H.; Schiek, B.},
  pages     = {129 -- 132},
  year      = {1995},
  language  = {en}
}
@article{HeuermannBaumannFauthetal.1994,
  author    = {Heuermann, Holger and Baumann, F.-M. and Fauth, G. and Albert, M.},
  title     = {Results of Network Analyzer Measurements with Leakage Errors Corrected with the TMS-15-Term Procedure},
  series = {On-Line Moisture Analysis of Raw Coal},
  journal   = {On-Line Moisture Analysis of Raw Coal},
  pages     = {1361 -- 1364},
  year      = {1994},
  language  = {en}
}
@article{HeuermannSchiek1994,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Results of Network Analyzer Measurements with Leakage Errors Corrected with the TMS-15-Term Procedure},
  pages     = {1361 -- 1364},
  year      = {1994},
  language  = {en}
}
@article{HeuermannSchiek1995,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {The double-LNN Calibration technique for scattering parameter measurements of microstrip devices},
  series = {Conference proceedings},
  journal   = {Conference proceedings},
  publisher = {NEXUS House},
  address   = {Kent},
  pages     = {343 -- 347},
  year      = {1995},
  language  = {en}
}
@article{Heuermann1996,
  author    = {Heuermann, Holger},
  title     = {Sure Methods of On-Wafer Scattering Parameter Measurements with Self-Calibration Procedures},
  pages     = {136 -- 145},
  year      = {1996},
  language  = {en}
}
@article{Heuermann1997,
  author    = {Heuermann, Holger},
  title     = {Microwave On-Wafer Measurements with Activ Needle Probe Tips},
  pages     = {208 -- 214},
  year      = {1997},
  language  = {en}
}
@article{Heuermann1995,
  author    = {Heuermann, Holger},
  title     = {LZY: A Self-Calibration Approach in Competition to the LRM Method for On-Wafer Measurements},
  pages     = {129 -- 136},
  year      = {1995},
  language  = {en}
}
@article{HeuermannSchiek1994,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Scattering Parameter Measurements of Microstrip Devices using the Double-LNN Calibration Technique},
  series = {Conference proceedings : [Palais des Festivals et des Congr{\`e}s Cannes, France, 5 - 8 September 1994]},
  journal   = {Conference proceedings : [Palais des Festivals et des Congr{\`e}s Cannes, France, 5 - 8 September 1994]},
  publisher = {Nexus Business Communications},
  address   = {Swanley},
  isbn      = {0-9518032-5-5},
  year      = {1994},
  language  = {en}
}
@article{HeuermannSchiek1992,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {The In-Fixture Calibration Procedure Line-Network-Network-LNN},
  series = {Conference proceedings : monday 6th to thursday 9th september 1993, Palacio de Congresos, Madrid, Spain ; [the international conference and exhibition designed for the Microwave Community]},
  journal   = {Conference proceedings : monday 6th to thursday 9th september 1993, Palacio de Congresos, Madrid, Spain ; [the international conference and exhibition designed for the Microwave Community]},
  publisher = {Reed Exhibition Companies},
  address   = {Tunbridge Wells},
  isbn      = {0-946821-23-2},
  pages     = {500 -- 505},
  year      = {1992},
  language  = {en}
}
@article{HeuermannSchiek1992,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {A Fast and Robust Procedure for the Determination of the Scattering Parameters for Network Analyzer Calibration},
  address   = {Paris},
  pages     = {373 -- 374},
  year      = {1992},
  language  = {en}
}
@article{HeuermannSchiek1993,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {LNN( Line-Network-Network): The In-Fixture Calibration Procedure},
  pages     = {149 -- 149},
  year      = {1993},
  language  = {en}
}
@article{HeuermannSchiek1992,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {A Generalization of the Txx Network Analyzer Self-Calibration Procedure},
  series = {Conference proceedings : monday 24th to thursday 27th august 1992, Helsinki University of Technology, Espoo, Finland ; [the international conference and exhibition designed for the Microwave Community]. Vol. 2},
  journal   = {Conference proceedings : monday 24th to thursday 27th august 1992, Helsinki University of Technology, Espoo, Finland ; [the international conference and exhibition designed for the Microwave Community]. Vol. 2},
  publisher = {Microwave Exhibitions and Publishers},
  address   = {Tunbridge Wells},
  isbn      = {0-946821-77-1},
  pages     = {907 -- 912},
  year      = {1992},
  language  = {en}
}
@article{HeuermannSchiek1994,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Error Corrected Impedance Measurements with a Network Analyzer},
  pages     = {125 -- 126},
  year      = {1994},
  language  = {en}
}
@article{HeuermannSchiek1992,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {LNN (Line-Network-Network): Verfahren zur Kalibrierung von Netzwerkanalysatoren},
  series = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 36. 1992 (1992)},
  journal   = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 36. 1992 (1992)},
  pages     = {327 -- 335},
  year      = {1992},
  language  = {en}
}
@article{HeuermannSchiek1994,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Calibration of network analyser measurements with leakage errors},
  series = {Electronics letters. 30 (1994), H. 1},
  journal   = {Electronics letters. 30 (1994), H. 1},
  isbn      = {0013-5194},
  pages     = {52 -- 53},
  year      = {1994},
  language  = {en}
}
@article{HeuermannSchiek1997,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Line Network Network (LNN): an alternative in-fixture calibration procedure},
  series = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 45 (1997), H. 3},
  journal   = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 45 (1997), H. 3},
  isbn      = {0018-9480},
  pages     = {408 -- 413},
  year      = {1997},
  language  = {en}
}
@article{HeuermannSchiek1997,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {15-term self-calibration methods for the error-correction of on-wafer measurements},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 46 (1997), H. 5},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 46 (1997), H. 5},
  isbn      = {0018-9456},
  pages     = {1105 -- 1110},
  year      = {1997},
  language  = {en}
}
@article{Heuermann1999,
  author    = {Heuermann, Holger},
  title     = {Calibration procedures with series impedances and unknown lines simplify on-wafer measurements},
  series = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 47 (1999), H. 1},
  journal   = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 47 (1999), H. 1},
  isbn      = {0018-9480},
  pages     = {1 -- 5},
  year      = {1999},
  language  = {en}
}
@article{HeuermannSchiek1994,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {Robust Algorithms for Txx Network Analyzer Self-Calibration Procedures},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 43 (1994), H. 1},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 43 (1994), H. 1},
  isbn      = {0018-9456},
  pages     = {18 -- 23},
  year      = {1994},
  language  = {en}
}
@article{HeuermannSchiek1997,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {Results of network analyzer measurements with leakage errors-corrected with direct calibration techniques},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 46 (1997), H. 5},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 46 (1997), H. 5},
  isbn      = {0018-9456},
  pages     = {1120 -- 1127},
  year      = {1997},
  language  = {en}
}
@article{HeuermannSchiek1993,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {Procedures for the Determination of the Scattering Parameters for Network Analyzer Calibration},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 42 (1993), H. 2},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 42 (1993), H. 2},
  isbn      = {0018-9456},
  pages     = {528 -- 531},
  year      = {1993},
  language  = {en}
}
@article{HeuermannSchiek1995,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {Error corrected impedance measurements with a network analyzer},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 44 (1995), H. 2},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 44 (1995), H. 2},
  isbn      = {0018-9456},
  pages     = {295 -- 299},
  year      = {1995},
  language  = {en}
}
@article{Benkner1994,
  author    = {Benkner, Thorsten},
  title     = {Full Adaptive Channel Assignment Schemes for PRMA++ Cellular Mobile Radio Systems},
  year      = {1994},
  language  = {en}
}
@article{Benkner1993,
  author    = {Benkner, Thorsten},
  title     = {Digital TV Receiver with a low IF},
  series = {IEEE transactions on consumer electronics : CE ; a publication by the IEEE Consumer Electronics Society. Vol. 39 (1993), H. No. 3},
  journal   = {IEEE transactions on consumer electronics : CE ; a publication by the IEEE Consumer Electronics Society. Vol. 39 (1993), H. No. 3},
  year      = {1993},
  language  = {en}
}
@article{Benkner1995,
  author    = {Benkner, Thorsten},
  title     = {Autonomous Slot Assignment Schemes for PRMA++ Third Generation TDMA Systems},
  series = {Proceedings / Organization: IEEE Vehicular Technology/Communications Society; Joint Chapter in the Benelux Section and Telecommunications Division, Eindhoven University of Technology, The Netherlands. Ed.: Peter Smulders},
  journal   = {Proceedings / Organization: IEEE Vehicular Technology/Communications Society; Joint Chapter in the Benelux Section and Telecommunications Division, Eindhoven University of Technology, The Netherlands. Ed.: Peter Smulders},
  publisher = {Techn. Univ. Eindhoven, Telecommunications Div.},
  address   = {Eindhoven},
  isbn      = {9061449928},
  pages     = {209 S.},
  year      = {1995},
  language  = {en}
}
@article{Benkner1994,
  author    = {Benkner, Thorsten},
  title     = {Investigation of mobile antenna diagrams on cochannel interference},
  series = {Proceedings / Organization: IEEE Vehicular Technology/Communications Society; Joint Chapter in the Benelux Section. Ed.: L. Vandendorpe},
  journal   = {Proceedings / Organization: IEEE Vehicular Technology/Communications Society; Joint Chapter in the Benelux Section. Ed.: L. Vandendorpe},
  publisher = {Univ. Catholoque de Louvain},
  address   = {Loovain},
  pages     = {237 Bl.},
  year      = {1994},
  language  = {en}
}
@article{Benkner1996,
  author    = {Benkner, Thorsten},
  title     = {Dynamic Slot Allocation for TDMA-Systems with Packet Access},
  series = {Multiaccess, mobility and teletraffic for personal communications : [proceedings of the Second Workshop on Multiaccess, Mobility and Teletraffic for Personal Communications held in May 1996 in Paris, France] / ed. by Bijan Jabbari},
  journal   = {Multiaccess, mobility and teletraffic for personal communications : [proceedings of the Second Workshop on Multiaccess, Mobility and Teletraffic for Personal Communications held in May 1996 in Paris, France] / ed. by Bijan Jabbari},
  publisher = {Kluwer},
  address   = {Boston [u.a.]},
  isbn      = {0-79239742-8},
  pages     = {VIII, 364 S. : Ill., graph. Darst.},
  year      = {1996},
  language  = {en}
}
@article{Benkner1996,
  author    = {Benkner, Thorsten},
  title     = {CS+: A Novel Self-Adaptive Slot Assignment Scheme for ATDMA},
  series = {Mobile technology for the human race / 1996 IEEE 46th Vehicular Technology Conference, Atlanta, Georgia, USA, April 28 - May 1, 1996},
  journal   = {Mobile technology for the human race / 1996 IEEE 46th Vehicular Technology Conference, Atlanta, Georgia, USA, April 28 - May 1, 1996},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NY},
  isbn      = {0-7803-3158-3},
  year      = {1996},
  language  = {en}
}
@article{Benkner1998,
  author    = {Benkner, Thorsten},
  title     = {Optimum Transmission Power in High Capacity Umbrella Cell Systems},
  series = {Multiaccess, mobility and teletraffic : advances in wireless networks ; [proceedings of the Third Workshop on Multiaccess, Mobility and Teletraffic for Personal Communications held in December 1997 in Melbourne, Australia] / ed. by David Everitt ...},
  journal   = {Multiaccess, mobility and teletraffic : advances in wireless networks ; [proceedings of the Third Workshop on Multiaccess, Mobility and Teletraffic for Personal Communications held in December 1997 in Melbourne, Australia] / ed. by David Everitt ...},
  publisher = {Kluwer},
  address   = {Boston, Mass. [u.a.]},
  isbn      = {0-7923-8091-6},
  pages     = {221 -- 232},
  year      = {1998},
  language  = {en}
}
@article{Benkner1999,
  author    = {Benkner, Thorsten},
  title     = {Wireless ATM - Broadband Mobile Radio Systems},
  series = {Multiaccess, mobility and teletraffic for wireless communications. Workshop on Multiaccess, Mobility and Teletraffic for Wireless Communications <4, 1998, Washington, DC>},
  journal   = {Multiaccess, mobility and teletraffic for wireless communications. Workshop on Multiaccess, Mobility and Teletraffic for Wireless Communications <4, 1998, Washington, DC>},
  publisher = {Kluwer},
  address   = {Boston [u.a.]},
  pages     = {155 -- 170},
  year      = {1999},
  language  = {en}
}
@article{SchulteZurhausenPoznanska1994,
  author    = {Schulte-Zurhausen, Manfred and Poznanska, K.},
  title     = {Kryteria klasyfikacji malych i srednich przedsiebiorstw = Kriterien zur Klassifizierung von kleinen und mittleren Unternehmen},
  series = {Przeglad Organizacji (1994)},
  journal   = {Przeglad Organizacji (1994)},
  pages     = {24 -- 27},
  year      = {1994},
  language  = {en}
}
@article{GebhardtSchmidt2002,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael},
  title     = {Practical experiences with making and finishing of coloured models using 3D printing},
  year      = {2002},
  language  = {en}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping and PIV},
  year      = {2001},
  language  = {en}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Laserwelding with fillerwire},
  series = {LIA handbook of laser material processing / Laser Institute of America},
  journal   = {LIA handbook of laser material processing / Laser Institute of America},
  address   = {Orlando, Florida},
  isbn      = {3-540-41770-2},
  year      = {2001},
  language  = {en}
}
@article{Kern1990,
  author    = {Kern, Alexander},
  title     = {The heating of metal sheets caused by direct lightning strikes-model and measurement},
  series = {20th ICPL / International Conference on Lightning Protection, Congress-Center Casino Interlaken, Switzerland, September 24-28, 1990 = Internationale Blitzschutzkonferenz, Congress-Center Casino Interlaken, Schweiz, 24.-28. September 1990},
  journal   = {20th ICPL / International Conference on Lightning Protection, Congress-Center Casino Interlaken, Switzerland, September 24-28, 1990 = Internationale Blitzschutzkonferenz, Congress-Center Casino Interlaken, Schweiz, 24.-28. September 1990},
  publisher = {Schweizerischer Elektrotechnischer Verein},
  address   = {[Z{\"u}rich]},
  pages     = {[522] S. (getr. Z{\"a}hl.) : Ill.},
  year      = {1990},
  language  = {en}
}
@article{Kern1989,
  author    = {Kern, Alexander},
  title     = {Time dependent temperature distribution in metal sheets caused by direct lightning strikes},
  series = {Proceedings / Sixth International Symposium on High Voltage Engineering : 28. August - 1. September, 1989, Westin Canal Place Hotel, New Orleans, Louisiana, USA},
  journal   = {Proceedings / Sixth International Symposium on High Voltage Engineering : 28. August - 1. September, 1989, Westin Canal Place Hotel, New Orleans, Louisiana, USA},
  publisher = {Mississippi State University},
  address   = {Mississippi State, Miss.},
  year      = {1989},
  language  = {en}
}
@article{KernLangWiesingeretal.1989,
  author    = {Kern, Alexander and Lang, U. and Wiesinger, J. and Zischank, Wolfgang J.},
  title     = {The longitudinal voltage of cable tubes with a screening mesh caused by partial lightning currents},
  series = {Proceedings / Sixth International Symposium on High Voltage Engineering : 28. August - 1. September, 1989, Westin Canal Place Hotel, New Orleans, Louisiana, USA},
  journal   = {Proceedings / Sixth International Symposium on High Voltage Engineering : 28. August - 1. September, 1989, Westin Canal Place Hotel, New Orleans, Louisiana, USA},
  publisher = {Mississippi State University},
  address   = {Mississippi State, Miss.},
  year      = {1989},
  language  = {en}
}
@article{KernZischank1988,
  author    = {Kern, Alexander and Zischank, Wolfgang J.},
  title     = {Melting effects on metal sheets and air termination wires caused by direct lightning strikes},
  series = {Conference proceedings : Graz, {\"O}sterreich, 25. - 29. April 1988 / Gesamtorganisation: {\"O}sterr. Verb. f{\"u}r Elektrotechnik ({\"O}VE), Fachausschuß Blitzschutz ... [Red.: G. Diendorfer ...]},
  journal   = {Conference proceedings : Graz, {\"O}sterreich, 25. - 29. April 1988 / Gesamtorganisation: {\"O}sterr. Verb. f{\"u}r Elektrotechnik ({\"O}VE), Fachausschuß Blitzschutz ... [Red.: G. Diendorfer ...]},
  publisher = {Eigenverl. des {\"O}VE},
  address   = {Wien},
  isbn      = {3-85133-001-3},
  year      = {1988},
  language  = {en}
}
@article{KernRothWiedmann1992,
  author    = {Kern, Alexander and Roth, J. and Wiedmann, J.},
  title     = {Comparison of the damage for various types of fibre reinforced composites due to different lightning test standards (MIL-STD 1757 A, German military VG-standard 96903)},
  series = {Proceedings of the 1992 International Aerospace and Ground Conference on Lightning and Static Electricity : October 6-8, 1992, Trump Taj Mahal, Atlantic City, NJ.},
  journal   = {Proceedings of the 1992 International Aerospace and Ground Conference on Lightning and Static Electricity : October 6-8, 1992, Trump Taj Mahal, Atlantic City, NJ.},
  publisher = {U.S. Dept. of Transportation, Federal Aviation Administration},
  address   = {[Atlantic City, N.J.]},
  pages     = {Getr. Z{\"a}hl. : Ill. + addendum},
  year      = {1992},
  language  = {en}
}
@article{KernZischank1992,
  author    = {Kern, Alexander and Zischank, Wolfgang J.},
  title     = {The effect of parallel wires on the longitudinal voltage drop along shielded cables},
  series = {Conference proceedings : 21st International Conference on Lightning Protection, Berlin Congress Center (BCC) Germany, September 22 - 25, 1992 = 21. Internationale Blitzschutzkonferenz / [proceedings ed. staff: J. Pilling ...]},
  journal   = {Conference proceedings : 21st International Conference on Lightning Protection, Berlin Congress Center (BCC) Germany, September 22 - 25, 1992 = 21. Internationale Blitzschutzkonferenz / [proceedings ed. staff: J. Pilling ...]},
  publisher = {VDE-Verl.},
  address   = {Berlin [u.a.]},
  isbn      = {3-8007-1885-5},
  pages     = {570 S : Ill., graph. Darst., Kt.},
  year      = {1992},
  language  = {en}
}
@article{KernWiesingerZischank1991,
  author    = {Kern, Alexander and Wiesinger, J. and Zischank, Wolfgang J.},
  title     = {Calculation of the longitudinal voltage along metal tubes caused by lightning currents and protection measures},
  series = {Seventh International Symposium on High Voltage Engineering : Dresden, August 26 - 30 1991},
  journal   = {Seventh International Symposium on High Voltage Engineering : Dresden, August 26 - 30 1991},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  year      = {1991},
  language  = {en}
}
@article{Kern1991,
  author    = {Kern, Alexander},
  title     = {Simulation and measurement of melting effects on metal sheets caused by direct lightning strikes},
  series = {1991 International Aerospace and Ground Conference on Lightning and Static Electricity : proceedings of a conference ... held at Cocoa Beach, Florida, April 16-19, 1991 / NASA},
  journal   = {1991 International Aerospace and Ground Conference on Lightning and Static Electricity : proceedings of a conference ... held at Cocoa Beach, Florida, April 16-19, 1991 / NASA},
  address   = {Washington, DC},
  year      = {1991},
  language  = {en}
}
@article{KernZischankHeidleretal.1998,
  author    = {Kern, Alexander and Zischank, Wolfgang J. and Heidler, Fridolin and Wiesinger, J. [u.a.]},
  title     = {Shielding effectiveness of reinforced concrete cable ducts carrying partial lightning currents},
  series = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  journal   = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  address   = {Birmingham},
  year      = {1998},
  language  = {en}
}
@article{KernThomsen1994,
  author    = {Kern, Alexander and Thomsen, M.},
  title     = {Comparison of single point and equipotential bonding for I\&C systems of large-area industrial sites},
  series = {Volume of proceedings : Budapest, Hungary, September 19-23, 1994 / organized by: Technical University of Budapest},
  journal   = {Volume of proceedings : Budapest, Hungary, September 19-23, 1994 / organized by: Technical University of Budapest},
  publisher = {Techn. Univ.},
  address   = {Budapest},
  pages     = {Getr. Z{\"a}hlung [ca. 610 S.]},
  year      = {1994},
  language  = {en}
}
@article{KernDrumm1994,
  author    = {Kern, Alexander and Drumm, F.},
  title     = {Survey of the lightning threat for aircraft based on natural lightning data and fixed in the German Standard DIN VG 95371 / Part 10},
  series = {Proceedings of the 1994 International Aerospace and Ground Conference on Lightning and Static Electricity : May 14 - 27, 1994, Bundesakademie f{\"u}r Wehrverwaltung und Wehrtechnik Mannheim ; final report / [conference chairman Jan Luiken TerHaseborg]},
  journal   = {Proceedings of the 1994 International Aerospace and Ground Conference on Lightning and Static Electricity : May 14 - 27, 1994, Bundesakademie f{\"u}r Wehrverwaltung und Wehrtechnik Mannheim ; final report / [conference chairman Jan Luiken TerHaseborg]},
  publisher = {Bundesakad. f{\"u}r Wehrverwaltung und Wehrtechnik},
  address   = {Mannheim},
  pages     = {IX, 492 S : Ill., graph. Darst},
  year      = {1994},
  language  = {en}
}
@article{KernKrichel2004,
  author    = {Kern, Alexander and Krichel, Frank},
  title     = {Considerations about the lightning protection system of mains independent renewable energy hybrid-systems - practical experiences},
  series = {Journal of electrostatics. 60 (2004), H. 2-4},
  journal   = {Journal of electrostatics. 60 (2004), H. 2-4},
  isbn      = {0304-3886},
  pages     = {257 -- 263},
  year      = {2004},
  language  = {en}
}
@article{ZischankHeidlerWiesingeretal.2004,
  author    = {Zischank, Wolfgang J. and Heidler, Fridolin and Wiesinger, J. and Metwally, I. and Kern, Alexander and Seevers, M.},
  title     = {Laboratory simulation of direct lightning strokes to a modeled building : measurement of magnetic fields and included voltages},
  series = {Journal of electrostatics. 60 (2004), H. 2 - 4},
  journal   = {Journal of electrostatics. 60 (2004), H. 2 - 4},
  isbn      = {0304-3886},
  pages     = {223 -- 232},
  year      = {2004},
  language  = {en}
}
@article{KernHeidlerZischanketal.2002,
  author    = {Kern, Alexander and Heidler, Fridolin and Zischank, Wolfgang J. and Frentzel, Ralf},
  title     = {Lightning current distribution and coupling to control cables in power plants or large industrial facilites},
  year      = {2002},
  language  = {en}
}
@article{KernKrichelNeskakisetal.2001,
  author    = {Kern, Alexander and Krichel, Frank and Neskakis, Apostolos and M{\"u}ller, Klaus-Peter (u.a.)},
  title     = {Lightning protection design of a renewable energy hybrid-system without power mains connection},
  year      = {2001},
  language  = {en}
}
@article{SchoeningLueth2001,
  author    = {Sch{\"o}ning, Michael Josef and L{\"u}th, H.},
  title     = {Novel concepts for silicon-based biosensors},
  series = {Physica Status Solidi (A) (2001)},
  journal   = {Physica Status Solidi (A) (2001)},
  isbn      = {0031-8965},
  pages     = {65 -- 77},
  year      = {2001},
  language  = {en}
}
@article{SchrothWeissbeckerSchuetzetal.2002,
  author    = {Schroth, P. and Weißbecker, B. and Sch{\"u}tz, S. and Ecken, H. and Yoshinobu, T. and L{\"u}th, H. and Sch{\"o}ning, Michael Josef},
  title     = {Bioelectronic signal processing - intact chemoreceptors coupled to field-effect devices},
  series = {Lecture Notes of the ICB Seminars},
  journal   = {Lecture Notes of the ICB Seminars},
  publisher = {MCB},
  address   = {Warsaw},
  pages     = {28 -- 42},
  year      = {2002},
  language  = {en}
}
@article{SchrothWeissbeckerSchuetzetal.2001,
  author    = {Schroth, P. and Weißbecker, B. and Sch{\"u}tz, S. and Ecken, H. and Yoshinobu, T. and L{\"u}th, H. and Sch{\"o}ning, Michael Josef},
  title     = {Bioelectronic signal processing - intact chemoreceptors coupled to field-effect devices},
  series = {Biocybernetics and Biomedical Engineering. 21 (2001), H. 3},
  journal   = {Biocybernetics and Biomedical Engineering. 21 (2001), H. 3},
  isbn      = {0208-5216},
  pages     = {27 -- 42},
  year      = {2001},
  language  = {en}
}
@article{Schoening2002,
  author    = {Sch{\"o}ning, Michael Josef},
  title     = {Novel approaches to design siliconbased field-effect sensors},
  series = {Electrochemical Microsystem Technologies, New Trends in Electrochemistry Vol. 2},
  journal   = {Electrochemical Microsystem Technologies, New Trends in Electrochemistry Vol. 2},
  publisher = {Taylor \& Francis},
  address   = {London New York},
  pages     = {384 -- 408},
  year      = {2002},
  language  = {en}
}
@article{SchoeningSchubertKloocketal.2002,
  author    = {Sch{\"o}ning, Michael Josef and Schubert, J and Kloock, Joachim P. and Zander, W. and Mourzina, Y. G. and Legin, A. and Vlasov, Y. G. and L{\"u}th, H.},
  title     = {Innovative thin film techniques for microfabricating electrochemical sensors},
  series = {Lecture Notes of the ICB Seminars},
  journal   = {Lecture Notes of the ICB Seminars},
  publisher = {MCB},
  address   = {Warsaw},
  pages     = {55 -- 66},
  year      = {2002},
  language  = {en}
}
@article{Schoening2003,
  author    = {Sch{\"o}ning, Michael Josef},
  title     = {Silicon-based biochemical sensors},
  series = {CNI - The Center of Nanoelectronic Systems for Information Technology},
  journal   = {CNI - The Center of Nanoelectronic Systems for Information Technology},
  publisher = {Foschungszentrum J{\"u}lich},
  pages     = {165 -- 170},
  year      = {2003},
  language  = {en}
}
@article{SchoeningLueth2002,
  author    = {Sch{\"o}ning, Michael Josef and L{\"u}th, H.},
  title     = {Microfabricated semiconductor structures - Advances in (bio-)chemical sensing},
  series = {Coupling of biological and electronic systems : proceedings of the 2nd Caesarium, Bonn, November 1 - 3, 2000 / Karl-Heinz Hoffmann, ed.},
  journal   = {Coupling of biological and electronic systems : proceedings of the 2nd Caesarium, Bonn, November 1 - 3, 2000 / Karl-Heinz Hoffmann, ed.},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-43699-5},
  pages     = {79 -- 92},
  year      = {2002},
  language  = {en}
}
@article{SchoeningSchubertKloocketal.2001,
  author    = {Sch{\"o}ning, Michael Josef and Schubert, Joachim P. and Kloock, Joachim P. and Zander, W. and Mourzina, Y. G. and Legin, A. and Vlasov, Y. G. and L{\"u}th, H.},
  title     = {Innovative thin film techniques for microfabricating electrochemical sensors},
  series = {Biocybernetics and Biomedical Engineering. 21 (2001), H. 4},
  journal   = {Biocybernetics and Biomedical Engineering. 21 (2001), H. 4},
  isbn      = {0208-5216},
  pages     = {107 -- 119},
  year      = {2001},
  language  = {en}
}
@article{AkimbekovMansurovJandosovetal.2013,
  author    = {Akimbekov, Nuraly S. and Mansurov, Zulkhair and Jandosov, J. and Digel, Ilya and Gossmann, Matthias and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A.},
  title     = {Wound healing activity of carbonized rice husk},
  publisher = {Trans Tech Publications, Switzerland},
  address   = {B{\"a}ch},
  year      = {2013},
  abstract  = {The carbonized rice husk (CRH) was evaluated for its wound healing activity in rats using excision models. In this study, the influences of CRH on wound healing in rat skin in vivo and cellular behavior of human dermal fibroblasts in vitro were investigated. The obtained results showed that the CRH treatment promoted wound epithelization in rats and exhibited moderate inhibition of cell proliferation in vitro. CRH with lanolin oil treated wounds were found to epithelize faster as compared to controls.},
  subject      = {Wundheilung},
  language  = {en}
}
@article{BogoyavlenskiyDigelBerezin1997,
  author    = {Bogoyavlenskiy, A. P. and Digel, Ilya and Berezin, V. E.},
  title     = {Assessment of dot-blot ELISA sensitivity on membrane sorbent using various peroxidase substrates},
  year      = {1997},
  abstract  = {The sensitivity of the peroxidase reaction in dot-blot ELISA significantly depends on the substrate. The highest sensitivity is observed using benzidine and diamine- phenol combinations as the substrates due to the reaction of the coupled oxidation (NADI)},
  subject      = {Enzyme-linked immunosorbent assay},
  language  = {en}
}
@article{ZhubanovaDigelNojimaetal.2007,
  author    = {Zhubanova, Azhar A. and Digel, Ilya and Nojima, H. and Artmann, Gerhard},
  title     = {The use of bactericidal effects of cluster ions generated by plasma in medical biotechnology},
  year      = {2007},
  abstract  = {The most of conventional methods of air purification use the power of a fan to draw in air and pass it through a filter. The problem of bacterial contamination of inner parts of such a type of air conditioners in some cases draws attention towards alternative air-cleaning systems. Some manufacturers offer to use the ozone's bactericidal and deodorizing effects, but the wide spreading of such systems is restricted by the fact that toxic effects of ozone in respect of human beings are well known. In 2000 Sharp Inc. introduced "Plasma Cluster Ions (PCI)" air purification technology, which uses plasma discharge to generate cluster ions (I 0-14 ). This technology has been developed for those customers that are conscious about health and hygiene. In our experiments, we focused on some principal aspects of plasma-generated ions application - time-dependency and irreversibility of bactericidal action, spatial and kinetic characteristics of emitted cluster particles, their chemical targets in the microbial cells.},
  subject      = {Clusterion},
  language  = {en}
}
@article{ZhubanovaAknazarovMansurovetal.2010,
  author    = {Zhubanova, Azhar A. and Aknazarov, S. K. and Mansurov, Zulkhair and Digel, Ilya and Kozhalakova, A. A. and Akimbekov, Nuraly S. and O'Heras, Carlos and Tazhibayeva, S. and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Adsorption of bacterial Lipopolysaccharides and blood plasma proteins on modified carbonized materials},
  year      = {2010},
  abstract  = {Bacterial lipopolysaccharides (endotoxins) show strong biological effects at very low concentrations in human beings and many animals when entering the blood stream. These include affecting structure and function of organs and cells, changing metabolic functions, raising body temperature, triggering the coagulation cascade, modifying hemodynamics and causing septic shock. Because of this toxicity, the removal of even minute amounts is essential for safe parenteral administration of drugs and also for septic shock patients' care. The absence of a general method for endotoxin removal from liquid interfaces urgently requires finding new methods and materials to overcome this gap. Nanostructured carbonized plant parts is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study was comparative measurement of endotoxin- and blood proteins-related adsorption rate and adsorption capacity for different carboneous materials produced at different temperatures and under different surface modifications. As a main surface modificator, positively cbarged polymer, polyethileneimine (PEl) was used. Activated carbon materials showed good adsorption properties for LPS and some proteins used in the experiments. During the batch experiments, several techniques (dust removal, autoclaving) were used and optimized for improving the material's adsorption behavior. Also, with the results obtained it was possible to differentiate the materials according to their adsorption capacity and kinetic characteristics. Modification of the surface apparently has not affected hemoglobin binding to the adsorbent's surface. Obtained adsorption isotherms can be used as a powerful tool for designing of future column-based setups for blood purification from LPS, which is especially important for septic shock treatment.},
  subject      = {Kohlenstofffaser},
  language  = {en}
}
@article{SeifarthSchehlLinderetal.2011,
  author    = {Seifarth, Volker and Schehl, D. and Linder, Peter and Gossmann, Matthias and Digel, Ilya and Artmann, Gerhard and Porst, Dariusz and Preiß, C. and Kayser, Peter and Pack, O. and Temiz Artmann, Ayseg{\"u}l},
  title     = {Ureplace: development of a bioreactor for in vitro culturing of cell seeded tubular vessels on collagen scaffolds},
  year      = {2011},
  abstract  = {The demand of replacements for inoperable organs exceeds the amount of available organ transplants. Therefore, tissue engineering developed as a multidisciplinary field of research for autologous in-vitro organs. Such three dimensional tissue constructs request the application of a bioreactor. The UREPLACE bioreactor is used to grow cells on tubular collagen scaffolds OPTIMAIX Sponge 1 with a maximal length of 7 cm, in order to culture in vitro an adequate ureter replacement. With a rotating unit, (urothelial) cells can be placed homogeneously on the inner scaffold surface. Furthermore, a stimulation is combined with this bioreactor resulting in an orientation of muscle cells. These culturing methods request a precise control of several parameters and actuators. A combination of a LabBox and the suitable software LabVision is used to set and conduct parameters like rotation angles, velocities, pressures and other important cell culture values. The bioreactor was tested waterproof successfully. Furthermore, the temperature controlling was adjusted to 37 °C and the CO2 - concentration regulated to 5 \%. Additionally, the pH step responses of several substances showed a perfect functioning of the designed flow chamber. All used software was tested and remained stable for several days.},
  subject      = {Tissue Engineering},
  language  = {en}
}
@article{PreissLinderWendtetal.2011,
  author    = {Preiß, C. and Linder, Peter and Wendt, K. and Krystek, M. and Digel, Ilya and Gossmann, Matthias and Temiz Artmann, Ayseg{\"u}l and Porst, Dariusz and Kayser, Peter and Bassam, Rasha and Artmann, Gerhard},
  title     = {Engineering technology for plant physiology and plant stress research},
  year      = {2011},
  abstract  = {Plant physiology and plant stress: Plant physiology will be much more important for human mankind because of yield and cultivation limits of crops determined by their resistance to stress. To assess and counteract various stress factors it is necessary to conduct plant research to gain information and results on plant physiology.},
  subject      = {Pflanzenphysiologie},
  language  = {en}
}
@article{BassamArtmannHescheleretal.2011,
  author    = {Bassam, Rasha and Artmann, Gerhard and Hescheler, J{\"u}rgen and Graef, T. and Temiz Artmann, Ayseg{\"u}l and Porst, Dariusz and Linder, Peter and Kayser, Peter and Arinkin, Vladimir and Gossmann, Matthias and Digel, Ilya},
  title     = {Alterations in human hemoglobin structure related to red blood cell storage},
  year      = {2011},
  abstract  = {The importance of the availability of stored blood or blood cells, respectively, for urgent transfusion cannot be overestimated. Nowadays, blood storage becomes even more important since blood products are used for epidemiological studies, bio-technical research or banked for transfusion purposes. Thus blood samples must not only be processed, stored, and shipped to preserve their efficacy and safety, but also all parameters of storage must be recorded and reported for Quality Assurance. Therefore, blood banks and clinical research facilities are seeking more accurate, automated means for blood storage and blood processing.},
  subject      = {H{\"a}moglobin},
  language  = {en}
}
@article{StaatBallmann1988,
  author    = {Staat, Manfred and Ballmann, J.},
  title     = {Computation of impacts on elastic solids by methods of bicharacteristics},
  series = {Computational Mechanics '88 : theory and applications ; proceedings of the International Conference on Computational Engineering Science April 10-14, 1988, Atlanta, GA, USA ; vol. 2},
  journal   = {Computational Mechanics '88 : theory and applications ; proceedings of the International Conference on Computational Engineering Science April 10-14, 1988, Atlanta, GA, USA ; vol. 2},
  pages     = {1719 -- 1722},
  year      = {1988},
  abstract  = {Shock waves, explosions, impacts or cavitation bubble collapses may generate stress waves in solids causing cracks or unexpected dammage due to focussing, physical nonlinearity or interaction with existing cracks. There is a growing interest in wave propagation, which poses many novel problems to experimentalists and theorists.},
  subject      = {Bicharakteristikenverfahren},
  language  = {en}
}
@article{KraftNagl2007,
  author    = {Kraft, Bodo and Nagl, Manfred},
  title     = {Visual Knowledge Specification for Conceptual Design: Definition and Tool Support},
  year      = {2007},
  abstract  = {In: Advanced Engineering Informatics. Vol 21, Issue 1, 2007, Pages 67-83 http://dx.doi.org/10.1016/j.aei.2006.10.001 eds. J.C. Kunz, I.F.C. Smith and T. Tomiyama, Elsevier, Seite 1-22 Current CAD tools are not able to support the conceptual design phase, and none of them provides a consistency analysis for sketches produced by architects. This phase is fundamental and crucial for the whole design and construction process of a building. To give architects a better support, we developed a CAD tool for conceptual design and a knowledge specification tool. The knowledge is specific to one class of buildings and it can be reused. Based on a dynamic and domain-specific knowledge ontology, different types of design rules formalize this knowledge in a graph-based form. An expressive visual language provides a user-friendly, human readable representation. Finally, a consistency analysis tool enables conceptual designs to be checked against this formal conceptual knowledge. In this article, we concentrate on the knowledge specification part. For that, we introduce the concepts and usage of a novel visual language and describe its semantics. To demonstrate the usability of our approach, two graph-based visual tools for knowledge specification and conceptual design are explained.},
  subject      = {CAD},
  language  = {en}
}
@article{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Generative Manufacturing of Ceramic Parts "Vision Rapid Prototyping"},
  year      = {2006},
  abstract  = {Table of Contents Introduction 1. Generative Manufacturing Processes 2. Classification of Generative Manufacturing Processes 3. Application of Generative Processes on the Fabrication of Ceramic Parts 3.1 Extrusion 3.2 3D-Printing 3.3 Sintering - Laser Sintering 3.4 Layer-Laminate Processes 3.5 Stereolithography (sometimes written: Stereo Lithography) 4. Layer Milling 5. Conclusion - Vision},
  subject      = {Rapid prototyping},
  language  = {en}
}
@article{BaroudWuBohneretal.2003,
  author    = {Baroud, G. and Wu, J.Z. and Bohner, M and Sponagel, Stefan and Steffen, T.},
  title     = {How to determine the permeability for cement infiltration into osteoporotic cancellous bone},
  series = {Medical Engineering \& Physics. 25 (2003), H. 4},
  journal   = {Medical Engineering \& Physics. 25 (2003), H. 4},
  issn      = {1350-4533},
  pages     = {283 -- 288},
  year      = {2003},
  abstract  = {Cement augmentation is an emerging surgical procedure in which bone cement is used to infiltrate and reinforce osteoporotic vertebrae. Although this infiltration procedure has been widely applied, it is performed empirically and little is known about the flow characteristics of cement during the injection process. We present a theoretical and experimental approach to investigate the intertrabecular bone permeability during the infiltration procedure. The cement permeability was considered to be dependent on time, bone porosity, and cement viscosity in our analysis. In order to determine the time-dependent permeability, ten cancellous bone cores were harvested from osteoporotic vertebrae, infiltrated with acrylic cement at a constant flow rate, and the pressure drop across the cores during the infiltration was measured. The viscosity dependence of the permeability was determined based on published experimental data. The theoretical model for the permeability as a function of bone porosity and time was then fit to the testing data. Our findings suggest that the intertrabecular bone permeability depends strongly on time. For instance, the initial permeability (60.89 mm4/N.s) reduced to approximately 63\% of its original value within 18 seconds. This study is the first to analyze cement flow through osteoporotic bone. The theoretical and experimental models provided in this paper are generic. Thus, they can be used to systematically study and optimize the infiltration process for clinical practice.},
  subject      = {Osteoporose},
  language  = {en}
}
@article{KuehnHaugnerStaatetal.2004,
  author    = {K{\"u}hn, Raoul-Roman and Haugner, Werner and Staat, Manfred and Sponagel, Stefan},
  title     = {A Two Phase Mixture Model based on Bone Observation},
  year      = {2004},
  abstract  = {An optimization method is developed to describe the mechanical behaviour of the human cancellous bone. The method is based on a mixture theory. A careful observation of the behaviour of the bone material leads to the hypothesis that the bone density is controlled by the principal stress trajectories (Wolff's law). The basic idea of the developed method is the coupling of a scalar value via an eigenvalue problem to the principal stress trajectories. On the one hand this theory will permit a prediction of the reaction of the biological bone structure after the implantation of a prosthesis, on the other hand it may be useful in engineering optimization problems. An analytical example shows its efficiency.},
  subject      = {Knochen},
  language  = {en}
}
@article{VuStaat2004,
  author    = {Vu, Duc-Khoi and Staat, Manfred},
  title     = {An algorithm for shakedown analysis of structure with temperature dependent yield stress},
  year      = {2004},
  abstract  = {This work is an attempt to answer the question: How to use convex programming in shakedown analysis of structures made of materials with temperature-dependent properties. Based on recently established shakedown theorems and formulations, a dual relationship between upper and lower bounds of the shakedown limit load is found, an algorithmfor shakedown analysis is proposed. While the original problem is neither convex nor concave, the algorithm presented here has the advantage of employing convex programming tools.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{Staat2000,
  author    = {Staat, Manfred},
  title     = {Direct FEM Limit and Shakedown Analysis with Uncertain Data},
  year      = {2000},
  abstract  = {The structural reliability with respect to plastic collapse or to inadaptation is formulated on the basis of the lower bound limit and shakedown theorems. A direct definition of the limit state function is achieved which permits the use of the highly effective first order reliability methods (FORM) is achieved. The theorems are implemented into a general purpose FEM program in a way capable of large-scale analysis. The limit state function and its gradient are obtained from a mathematical optimization problem. This direct approach reduces considerably the necessary knowledge of uncertain technological input data, the computing time, and the numerical error, leading to highly effective and precise reliability analyses.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{KaemperPicardBrilletal.2003,
  author    = {K{\"a}mper, Klaus-Peter and Picard, Antoni and Brill, Manfred and Cassel, Detlev and Jentsch, Andreas and Merten, Sabine and Rollwa, Markus},
  title     = {The Virtual Clean Room - a new tool in teaching MST process technologies},
  year      = {2003},
  abstract  = {The Virtual Clean Room - a new tool in teaching MST process technologies University education in high-technology fields like MST is not complete without intensive laboratory sessions. Students cannot fully grasp the complexity and the special problems related to the manufacturing of microsystems without a thorough hands-on experience in a MST clean room.},
  subject      = {Virtuelle Maschine},
  language  = {en}
}
@article{Staat2001,
  author    = {Staat, Manfred},
  title     = {LISA - a European project for FEM-based limit and shakedown analysis},
  year      = {2001},
  abstract  = {The load-carrying capacity or the safety against plastic limit states are the central questions in the design of structures and passive components in the apparatus engineering. A precise answer is most simply given by limit and shakedown analysis. These methods can be based on static and kinematic theorems for lower and upper bound analysis. Both may be formulated as optimization problems for finite element discretizations of structures. The problems of large-scale analysis and the extension towards realistic material modelling will be solved in a European research project. Limit and shakedown analyses are briefly demonstrated with illustrative examples.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{Staat2000,
  author    = {Staat, Manfred},
  title     = {Basis Reduction for the Shakedown Problem for Bounded Kinematic Hardening Material},
  year      = {2000},
  abstract  = {Limit and shakedown analysis are effective methods for assessing the load carrying capacity of a given structure. The elasto-plastic behavior of the structure subjected to loads varying in a given load domain is characterized by the shakedown load factor, defined as the maximum factor which satisfies the sufficient conditions stated in the corresponding static shakedown theorem. The finite element dicretization of the problem may lead to very large convex optimization. For the effective solution a basis reduction method has been developed that makes use of the special problem structure for perfectly plastic material. The paper proposes a modified basis reduction method for direct application to the two-surface plasticity model of bounded kinematic hardening material. The considered numerical examples show an enlargement of the load carrying capacity due to bounded hardening.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{Staat2003,
  author    = {Staat, Manfred},
  title     = {Shakedown and ratchetting under tension-torsion loadings: analysis and experiments},
  year      = {2003},
  abstract  = {Structural design analyses are conducted with the aim of verifying the exclusion of ratchetting. To this end it is important to make a clear distinction between the shakedown range and the ratchetting range. The performed experiment comprised a hollow tension specimen which was subjected to alternating axial forces, superimposed with constant moments. First, a series of uniaxial tests has been carried out in order to calibrate a bounded kinematic hardening rule. The load parameters have been selected on the basis of previous shakedown analyses with the PERMAS code using a kinematic hardening material model. It is shown that this shakedown analysis gives reasonable agreement between the experimental and the numerical results. A linear and a nonlinear kinematic hardening model of two-surface plasticity are compared in material shakedown analysis.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{Staat2005,
  author    = {Staat, Manfred},
  title     = {Direct finite element route for design-by-analysis of pressure components},
  year      = {2005},
  abstract  = {In the new European standard for unfired pressure vessels, EN 13445-3, there are two approaches for carrying out a Design-by-Analysis that cover both the stress categorization method (Annex C) and the direct route method (Annex B) for a check against global plastic deformation and against progressive plastic deformation. This paper presents the direct route in the language of limit and shakedown analysis. This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for mechanical and thermal actions. One observation from the examples is that the so-called 3f (3Sm) criterion fails to be a reliable check against progressive plastic deformation. Precise conditions are given, which greatly restrict the applicability of the 3f criterion.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}