@article{KernKloetersPferdemenges2010,
  author    = {Kern, Alexander and Kl{\"o}ters, Georg and Pferdemenges, J{\"o}rg},
  title     = {Optimised protection against lightning for the signalling and safety systems of level crossings on non-electrified railway lines},
  series = {RTR : European Rail Technology Review},
  volume    = {50},
  journal   = {RTR : European Rail Technology Review},
  number    = {2},
  isbn      = {0079-9548},
  year      = {2010},
  language  = {en}
}
@article{KernKloetersPferdmenges2009,
  author    = {Kern, Alexander and Kl{\"o}ters, Georg and Pferdmenges, J{\"o}rg},
  title     = {Blitzschutzoptimierung in der LST an nicht-elektrifizierten Strecken},
  series = {Signal und Draht. 101 (2009), H. 4},
  journal   = {Signal und Draht. 101 (2009), H. 4},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  isbn      = {0037-4997},
  pages     = {17 -- 21},
  year      = {2009},
  language  = {de}
}
@article{KernKrichel2004,
  author    = {Kern, Alexander and Krichel, Frank},
  title     = {Considerations about the lightning protection system of mains independent renewable energy hybrid-systems - practical experiences},
  series = {Journal of electrostatics. 60 (2004), H. 2-4},
  journal   = {Journal of electrostatics. 60 (2004), H. 2-4},
  isbn      = {0304-3886},
  pages     = {257 -- 263},
  year      = {2004},
  language  = {en}
}
@article{KernKrichelNeskakisetal.2001,
  author    = {Kern, Alexander and Krichel, Frank and Neskakis, Apostolos and M{\"u}ller, Klaus-Peter (u.a.)},
  title     = {Lightning protection design of a renewable energy hybrid-system without power mains connection},
  year      = {2001},
  language  = {en}
}
@article{KernLanders2002,
  author    = {Kern, Alexander and Landers, E.-U.},
  title     = {Die neuen Blitzschutz-Vornormen der Reihe VDE-V 0185:2002},
  year      = {2002},
  language  = {de}
}
@article{KernLanders2006,
  author    = {Kern, Alexander and Landers, E.-U.},
  title     = {Die k{\"u}nftige deutsche Blitzschutznormung (2/3) - Reihe DIN EN 62305:2006 - Teil 2: Risikomanagement},
  series = {De : der Elektro- und Geb{\"a}udetechniker / Ausgabe ZV. 81 (2006), H. 18 - 19},
  journal   = {De : der Elektro- und Geb{\"a}udetechniker / Ausgabe ZV. 81 (2006), H. 18 - 19},
  isbn      = {1617-1160},
  year      = {2006},
  language  = {de}
}
@article{KernLandersScheibeetal.2006,
  author    = {Kern, Alexander and Landers, E.-U. and Scheibe, K. and Zahlmann, P.},
  title     = {Die k{\"u}nftige deutsche Blitzschutznormung (1) : Reihe DIN EN 62305 / VDE 0185-305-x:2006},
  series = {De : der Elektro- und Geb{\"a}udetechniker / Ausgabe ZV. 81 (2006), H. 15-16},
  journal   = {De : der Elektro- und Geb{\"a}udetechniker / Ausgabe ZV. 81 (2006), H. 15-16},
  isbn      = {1617-1160},
  pages     = {26 -- 30},
  year      = {2006},
  language  = {de}
}
@article{KernLangWiesingeretal.1989,
  author    = {Kern, Alexander and Lang, U. and Wiesinger, J. and Zischank, Wolfgang J.},
  title     = {The longitudinal voltage of cable tubes with a screening mesh caused by partial lightning currents},
  series = {Proceedings / Sixth International Symposium on High Voltage Engineering : 28. August - 1. September, 1989, Westin Canal Place Hotel, New Orleans, Louisiana, USA},
  journal   = {Proceedings / Sixth International Symposium on High Voltage Engineering : 28. August - 1. September, 1989, Westin Canal Place Hotel, New Orleans, Louisiana, USA},
  publisher = {Mississippi State University},
  address   = {Mississippi State, Miss.},
  year      = {1989},
  language  = {en}
}
@article{KernRothWiedmann1992,
  author    = {Kern, Alexander and Roth, J. and Wiedmann, J.},
  title     = {Comparison of the damage for various types of fibre reinforced composites due to different lightning test standards (MIL-STD 1757 A, German military VG-standard 96903)},
  series = {Proceedings of the 1992 International Aerospace and Ground Conference on Lightning and Static Electricity : October 6-8, 1992, Trump Taj Mahal, Atlantic City, NJ.},
  journal   = {Proceedings of the 1992 International Aerospace and Ground Conference on Lightning and Static Electricity : October 6-8, 1992, Trump Taj Mahal, Atlantic City, NJ.},
  publisher = {U.S. Dept. of Transportation, Federal Aviation Administration},
  address   = {[Atlantic City, N.J.]},
  pages     = {Getr. Z{\"a}hl. : Ill. + addendum},
  year      = {1992},
  language  = {en}
}
@article{KernScheibe2011,
  author    = {Kern, Alexander and Scheibe, Klaus},
  title     = {Die neuen internationalen Blitzschutz-Standards der Reihe IEC 62305:2010 : {\"U}berblick und Stand der Umsetzung in die nationale Normenreihe DIN EN 62305},
  series = {9. VDE/ABB-Blitzschutztagung : Vortr{\"a}ge der 9. VDE/ABB-Fachtagung vom 27. bis 28. Oktober 2011 in Neu-Ulm / Veranst.: Ausschuss f{\"u}r Blitzschutz und Blitzforschung (ABB) im VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. Wiss. Tagungsleitung: K. Stimper},
  journal   = {9. VDE/ABB-Blitzschutztagung : Vortr{\"a}ge der 9. VDE/ABB-Fachtagung vom 27. bis 28. Oktober 2011 in Neu-Ulm / Veranst.: Ausschuss f{\"u}r Blitzschutz und Blitzforschung (ABB) im VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. Wiss. Tagungsleitung: K. Stimper},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {978-3-8007-3380-4},
  pages     = {7 -- 12},
  year      = {2011},
  language  = {de}
}
@article{KernSchelthoff2007,
  author    = {Kern, Alexander and Schelthoff, Christof},
  title     = {Auswahl von Blitzschutzmassnahmen nach DIN EN 623305 (VDE 0185-305-x)},
  series = {etz Elektrotechnik und Automation. 127 (2007), H. 8},
  journal   = {etz Elektrotechnik und Automation. 127 (2007), H. 8},
  isbn      = {0948-7387},
  pages     = {83 -- 90},
  year      = {2007},
  language  = {de}
}
@article{KernSchelthoff2007,
  author    = {Kern, Alexander and Schelthoff, Christof},
  title     = {Trennungsabstand bei Blitzschutzsystemen. Die Anforderungen nach VDE 0185-305-3:2006:10},
  series = {de- Der Elektro- und Geb{\"a}udetechniker (2007)},
  journal   = {de- Der Elektro- und Geb{\"a}udetechniker (2007)},
  pages     = {43 -- 48},
  year      = {2007},
  language  = {de}
}
@article{KernSchelthoffMathieu2010,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Die dynamische Blitzkugel : Wahrscheinlichkeitsberechnung f{\"u}r Blitzeinschl{\"a}ge in Geb{\"a}ude},
  series = {De Fachzeitschrift f{\"u}r das Elektrohandwerk. 13-14 (2010)},
  journal   = {De Fachzeitschrift f{\"u}r das Elektrohandwerk. 13-14 (2010)},
  pages     = {24 -- 29},
  year      = {2010},
  language  = {de}
}
@article{KernSchelthoffMathieu2010,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Probability of lightning strikes to air-terminations of structures using the electro-geometrical model theory and the statistics of lightning current parameters},
  pages     = {750-1 -- 750-8},
  year      = {2010},
  language  = {en}
}
@article{KernSchelthoffMathieu2011,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Detaillierte Berechnung der Einfangwirksamkeiten von Fangeinrichtungen mit einem dynamischen elektro-geometrischen Modell - Detailed calculation of the interception efficiencies for airtermination systems using a dynamic electro-geometrical model},
  pages     = {1 -- 5},
  year      = {2011},
  language  = {de}
}
@article{KernSchelthoffMathieu2011,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Calculation of interception efficiencies for airterminations using a dynamic electro-geometrical model},
  publisher = {IEEE},
  address   = {New York},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@article{KernSchelthoffMathieu2011,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Probability of lightning strikes to air-terminations of structures using the electro-geometrical model theory and the statistics of lightning current parameters},
  series = {Atmospheric Research. 104 (2011)},
  journal   = {Atmospheric Research. 104 (2011)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0169-8095},
  year      = {2011},
  language  = {en}
}
@article{KernThomsen1994,
  author    = {Kern, Alexander and Thomsen, M.},
  title     = {Comparison of single point and equipotential bonding for I\&C systems of large-area industrial sites},
  series = {Volume of proceedings : Budapest, Hungary, September 19-23, 1994 / organized by: Technical University of Budapest},
  journal   = {Volume of proceedings : Budapest, Hungary, September 19-23, 1994 / organized by: Technical University of Budapest},
  publisher = {Techn. Univ.},
  address   = {Budapest},
  pages     = {Getr. Z{\"a}hlung [ca. 610 S.]},
  year      = {1994},
  language  = {en}
}
@article{KernWiesingerZischank1991,
  author    = {Kern, Alexander and Wiesinger, J. and Zischank, Wolfgang J.},
  title     = {Calculation of the longitudinal voltage along metal tubes caused by lightning currents and protection measures},
  series = {Seventh International Symposium on High Voltage Engineering : Dresden, August 26 - 30 1991},
  journal   = {Seventh International Symposium on High Voltage Engineering : Dresden, August 26 - 30 1991},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  year      = {1991},
  language  = {en}
}
@article{KernZischankBeierl2007,
  author    = {Kern, Alexander and Zischank, Wolfgang and Beierl, Ottmar},
  title     = {Anmerkungen zur Berechnung des Trennungsabstands nach DIN EN 62305-3 (VDE 0185-305-3): 2006-10 / Zischank, Wolfgang ; Beierl, Ottmar ; Kern, Alexander},
  series = {7. VDE-ABB-Blitzschutztagung : Vortr{\"a}ge der VDE-ABB-Fachtagung vom 15. bis 16. November 2007 in Neu-Ulm / Veranst.: Ausschuss f{\"u}r Blitzschutz und Blitzforschung (ABB) im VDE, Verband der Elektrotechnik, Elektronik, Informationstechnik e.V. Wiss. Tagungsltg.: K. Stimper},
  journal   = {7. VDE-ABB-Blitzschutztagung : Vortr{\"a}ge der VDE-ABB-Fachtagung vom 15. bis 16. November 2007 in Neu-Ulm / Veranst.: Ausschuss f{\"u}r Blitzschutz und Blitzforschung (ABB) im VDE, Verband der Elektrotechnik, Elektronik, Informationstechnik e.V. Wiss. Tagungsltg.: K. Stimper},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {978-3-8007-3062-9},
  pages     = {1 -- 8},
  year      = {2007},
  language  = {de}
}
@article{KernZischank1993,
  author    = {Kern, Alexander and Zischank, Wolfgang J.},
  title     = {L{\"a}ngsspannung an blitzstromdurchflossenen Schirmkabeln - Einfluß paralleler Entlastungsleitungen},
  series = {Elektrie : wissenschaftlich-technische Zeitschrift der Elektrotechnik. 47 (1993), H. 6},
  journal   = {Elektrie : wissenschaftlich-technische Zeitschrift der Elektrotechnik. 47 (1993), H. 6},
  isbn      = {0013-5399},
  year      = {1993},
  language  = {de}
}
@article{KernZischank1992,
  author    = {Kern, Alexander and Zischank, Wolfgang J.},
  title     = {The effect of parallel wires on the longitudinal voltage drop along shielded cables},
  series = {Conference proceedings : 21st International Conference on Lightning Protection, Berlin Congress Center (BCC) Germany, September 22 - 25, 1992 = 21. Internationale Blitzschutzkonferenz / [proceedings ed. staff: J. Pilling ...]},
  journal   = {Conference proceedings : 21st International Conference on Lightning Protection, Berlin Congress Center (BCC) Germany, September 22 - 25, 1992 = 21. Internationale Blitzschutzkonferenz / [proceedings ed. staff: J. Pilling ...]},
  publisher = {VDE-Verl.},
  address   = {Berlin [u.a.]},
  isbn      = {3-8007-1885-5},
  pages     = {570 S : Ill., graph. Darst., Kt.},
  year      = {1992},
  language  = {en}
}
@article{KernZischank1988,
  author    = {Kern, Alexander and Zischank, Wolfgang J.},
  title     = {Melting effects on metal sheets and air termination wires caused by direct lightning strikes},
  series = {Conference proceedings : Graz, {\"O}sterreich, 25. - 29. April 1988 / Gesamtorganisation: {\"O}sterr. Verb. f{\"u}r Elektrotechnik ({\"O}VE), Fachausschuß Blitzschutz ... [Red.: G. Diendorfer ...]},
  journal   = {Conference proceedings : Graz, {\"O}sterreich, 25. - 29. April 1988 / Gesamtorganisation: {\"O}sterr. Verb. f{\"u}r Elektrotechnik ({\"O}VE), Fachausschuß Blitzschutz ... [Red.: G. Diendorfer ...]},
  publisher = {Eigenverl. des {\"O}VE},
  address   = {Wien},
  isbn      = {3-85133-001-3},
  year      = {1988},
  language  = {en}
}
@article{KernZischankHeidleretal.1998,
  author    = {Kern, Alexander and Zischank, Wolfgang J. and Heidler, Fridolin and Wiesinger, J. [u.a.]},
  title     = {Shielding effectiveness of reinforced concrete cable ducts carrying partial lightning currents},
  series = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  journal   = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  address   = {Birmingham},
  year      = {1998},
  language  = {en}
}
@article{KhedimSchwarzerFaberetal.2004,
  author    = {Khedim, Ahmed and Schwarzer, Klemens and Faber, Christian and M{\"u}ller, Christoph},
  title     = {Production d{\´e}centralis{\´e}e de l'eau potable {\`a} l'{\´e}nergie solaire},
  series = {Desalination. 168 (2004), H. 1-3},
  journal   = {Desalination. 168 (2004), H. 1-3},
  isbn      = {0011-9164},
  pages     = {13 -- 20},
  year      = {2004},
  language  = {en}
}
@article{KirschkampJoeckelWaehlischetal.1998,
  author    = {Kirschkamp, T. and J{\"o}ckel, M. and W{\"a}hlisch, Georg and Barry, J. C.},
  title     = {Konstruktion eines Modellauges zur Simulation von Purkinje-Spiegelbildern f{\"u}r die Bestimmung der Kr{\"u}mmungsradien und der Lage der Augenlinse},
  series = {Biomedizinische Technik = Biomedical Engineering},
  volume    = {Bd. 43},
  journal   = {Biomedizinische Technik = Biomedical Engineering},
  number    = {H. 11},
  issn      = {1862-278X (E-Journal); 0013-5585 (Print)},
  pages     = {318 -- 325},
  year      = {1998},
  language  = {de}
}
@article{KleinButenwegKlinkel2017,
  author    = {Klein, Michel and Butenweg, Christoph and Klinkel, Sven},
  title     = {The Influence of Soil-Structure-Interaction on the Fatigue Analysis in the Foundation Design of Onshore Wind Turbines},
  series = {Procedia Engineering},
  volume    = {199},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2017.09.325},
  pages     = {3218 -- 3223},
  year      = {2017},
  language  = {en}
}
@article{KollerStellberg1987,
  author    = {Koller, R. and Stellberg, Michael},
  title     = {Hilfsmittel zum systematischen Konstruieren : Ordnen von Spannverbindungen},
  series = {Industrie-Anzeiger. Bd. 109 (1987), H. 24},
  journal   = {Industrie-Anzeiger. Bd. 109 (1987), H. 24},
  issn      = {0019-9036},
  pages     = {28 - 29 -- 31 - 32},
  year      = {1987},
  language  = {de}
}
@article{KollerStellberg1987,
  author    = {Koller, R. and Stellberg, Michael},
  title     = {Ein Weg zu einer systematischen Konstruktion und Ordnung von Schnappverbindungen},
  series = {Konstruktion : Zeitschrift f{\"u}r Produktentwicklung und Ingenieur-Werkstoffe. Bd 39 (1987), H. 8},
  journal   = {Konstruktion : Zeitschrift f{\"u}r Produktentwicklung und Ingenieur-Werkstoffe. Bd 39 (1987), H. 8},
  issn      = {0720-5953},
  pages     = {315 -- 320},
  year      = {1987},
  language  = {de}
}
@article{KrafftFoersterHartetal.2001,
  author    = {Krafft, B. and F{\"o}rster, Arnold and Hart, A. van der and Sch{\"a}pers, T.},
  title     = {Control of Aharonov-Bohm oscillations in a AlGaAs/GaAs ring by asymmetric and symmetric gate biasing},
  series = {Physica E: Low-dimensional Systems and Nanostructures. 9 (2001), H. 4},
  journal   = {Physica E: Low-dimensional Systems and Nanostructures. 9 (2001), H. 4},
  isbn      = {1386-9477},
  pages     = {635 -- 641},
  year      = {2001},
  language  = {en}
}
@article{KubalskiButenweg2015,
  author    = {Kubalski, Thomas and Butenweg, Christoph},
  title     = {Modelling strategies for horizontally loaded infill masonry},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 19},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 5},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/dama.201500675},
  pages     = {363 -- 369},
  year      = {2015},
  language  = {de}
}
@article{KubalskiButenwegElDeib2022,
  author    = {Kubalski, Thomas and Butenweg, Christoph and El-Deib, Khaled},
  title     = {Vereinfachte Ber{\"u}cksichtigung der Rahmentragwirkung in Mauerwerksgeb{\"a}uden},
  series = {Bautechnik},
  volume    = {99},
  journal   = {Bautechnik},
  number    = {12},
  editor    = {Jesse, Dirk},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {0932-8351},
  doi       = {10.1002/bate.202200081},
  pages     = {865 -- 928},
  year      = {2022},
  abstract  = {Aufgrund der gestiegenen Anforderungen durch h{\"o}here Ein-wirkungen aus Wind und Erdbeben ist eine Verbesserung und Optimierung der Berechnungs- und Bemessungsans{\"a}tze f{\"u}r Mauerwerksbauten erforderlich. Eine bessere Ausnutzung der Tragwerksreserven ist durch die Ber{\"u}cksichtigung der Rah-mentragwirkung mit einer Aktivierung der Deckenscheiben in den Rechenmodellen m{\"o}glich, die in der Praxis aufgrund der Komplexit{\"a}t der Wand-Decken-Interaktion bislang nicht aus-genutzt wird. Im vorliegenden Aufsatz wird ein vereinfachter Ansatz auf Grundlage der mitwirkenden Plattenbreite von Schubw{\"a}nden aus Mauerwerk vorgestellt, der die wesentli-chen Einfl ussfaktoren in parametrisierten Tabellen erfasst. Damit steht den Tragwerksplanern ein einfach anwendbares Werkzeug zur Verf{\"u}gung, um die Rahmentragwirkung in der Mauerwerksbemessung anzusetzen.},
  language  = {de}
}
@article{KuhlmannButenwegBettzieche2006,
  author    = {Kuhlmann, Wolfram and Butenweg, Christoph and Bettzieche, Volker},
  title     = {Experimentelle und numerische Untersuchungen zur baudynamischen Beurteilung von Talsperren},
  series = {Wasserwirtschaft : Hydrologie, Wasserbau, Hydromechanik, Gew{\"a}sser, {\"O}kologie, Boden},
  volume    = {Band 96},
  journal   = {Wasserwirtschaft : Hydrologie, Wasserbau, Hydromechanik, Gew{\"a}sser, {\"O}kologie, Boden},
  number    = {Heft 5},
  issn      = {0043-0978 (E-Journal); 0043-0978 (Print)},
  pages     = {10 -- 16},
  year      = {2006},
  language  = {de}
}
@article{KuhlmannButenwegMeskouris2003,
  author    = {Kuhlmann, Wolfram and Butenweg, Christoph and Meskouris, Konstantin},
  title     = {Baudynamische Untersuchung des Aachener Doms unter Erdbebenbelastung},
  series = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  volume    = {Vol. 80},
  journal   = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  number    = {Iss. 10},
  issn      = {1437-0999 (E-Journal); 0005-6820 (Print); 0932-8351 (Print)},
  doi       = {10.1002/bate.200305080},
  pages     = {675 -- 684},
  year      = {2003},
  language  = {de}
}
@article{Kuperjans1996,
  author    = {Kuperjans, Isabel},
  title     = {Exergetische und exergo{\"o}konomische Analyse thermischer Prozesse},
  series = {Arbeitsbericht / Institut f{\"u}r Wirtschaftswissenschaften, Rheinisch-Westf{\"a}lische Technische Hochschule Aachen},
  journal   = {Arbeitsbericht / Institut f{\"u}r Wirtschaftswissenschaften, Rheinisch-Westf{\"a}lische Technische Hochschule Aachen},
  number    = {06},
  year      = {1996},
  language  = {de}
}
@article{Kuperjans2011,
  author    = {Kuperjans, Isabel},
  title     = {Gute Planung ist alles : Energieeffizienz in der Pharmaproduktion},
  series = {Pharma + Food},
  volume    = {2011},
  journal   = {Pharma + Food},
  number    = {2},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  issn      = {1434-8942},
  pages     = {8 -- 10},
  year      = {2011},
  language  = {de}
}
@article{KuperjansEsserMeyeretal.2000,
  author    = {Kuperjans, Isabel and Esser, J. and Meyer, J{\"o}rg and Donner, O.},
  title     = {Gestaltung und Bewertung von Energieanlagen unter {\"o}kologischen, wirtschaftlichen und technischen Gesichtspunkten},
  series = {Umweltwirtschaftsforum : UWF},
  volume    = {8},
  journal   = {Umweltwirtschaftsforum : UWF},
  number    = {3},
  issn      = {0943-3481},
  pages     = {53 -- 58},
  year      = {2000},
  language  = {de}
}
@article{KuperjansGuerzenichRoosen2005,
  author    = {Kuperjans, Isabel and G{\"u}rzenich, D. and Roosen, P.},
  title     = {Kostenfunktionen im WWW : Unterst{\"u}tzung der Auslegung energietechnischer Anlagen und deren Verschaltungen},
  series = {Gasw{\"a}rme international (GWI)},
  volume    = {54},
  journal   = {Gasw{\"a}rme international (GWI)},
  number    = {1},
  issn      = {0020-9384},
  pages     = {19 -- 21},
  year      = {2005},
  language  = {de}
}
@article{KuperjansStarkeEsseretal.2000,
  author    = {Kuperjans, Isabel and Starke, M. and Esser, J. and [u.a.],},
  title     = {Analyse und Konzeption von Energieanlagen unter {\"o}kologischen, wirtschaftlichen und technischen Gesichtspunkten},
  series = {WLB : Umwelttechnik f{\"u}r Industrie und Kommune},
  volume    = {44},
  journal   = {WLB : Umwelttechnik f{\"u}r Industrie und Kommune},
  number    = {11/12},
  issn      = {0341-2679},
  pages     = {26 -- 29},
  year      = {2000},
  language  = {de}
}
@article{KuperjansWeitzel2015,
  author    = {Kuperjans, Isabel and Weitzel, J.},
  title     = {Energiedesign 2020 : Sichere Strom- und W{\"a}rmeversorgung f{\"u}r die Industrie},
  series = {TAB: das Fachmedium der TGA-Branche},
  journal   = {TAB: das Fachmedium der TGA-Branche},
  number    = {3},
  publisher = {Bauverlag},
  address   = {G{\"u}tersloh},
  issn      = {0341-2032},
  pages     = {105 -- 107},
  year      = {2015},
  language  = {de}
}
@article{KuertenMottaghyZiegler2013,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {W{\"a}rme{\"u}bergangswiderstand bei fl{\"a}chigen thermo-aktiven Bauteilen am Beispiel thermo-aktiver Abdichtungselemente},
  series = {Bautechnik},
  volume    = {90},
  journal   = {Bautechnik},
  number    = {7},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-0999},
  doi       = {10.1002/bate.201300035},
  pages     = {387 -- 394},
  year      = {2013},
  language  = {de}
}
@article{KuertenMottaghyZiegler2014,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {Planung, Auslegung und Dimensionierung von thermo-aktiven Bauteilen am Beispiel thermo-aktiver Abdichtungselemente},
  series = {Geothermie, Bohr- und Brunnentechnik},
  journal   = {Geothermie, Bohr- und Brunnentechnik},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  pages     = {18 -- 20},
  year      = {2014},
  language  = {de}
}
@article{KuertenMottaghyZiegler2015,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {A new model for the description of the heat transfer for plane thermo-active geotechnical systems based on thermal resistances},
  series = {Acta Geotechnica},
  volume    = {10},
  journal   = {Acta Geotechnica},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1861-1133},
  doi       = {10.1007/s11440-014-0311-6},
  pages     = {219 -- 229},
  year      = {2015},
  language  = {en}
}
@article{KuertenMottaghyZiegler2015,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {Design of plane energy geostructures based on laboratory tests and numerical modelling},
  series = {Energy and Buildings},
  volume    = {107},
  journal   = {Energy and Buildings},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0378-7788},
  doi       = {10.1016/j.enbuild.2015.08.039},
  pages     = {434 -- 444},
  year      = {2015},
  language  = {en}
}
@article{KuertenMottaghyZiegler2015,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {Besonderheiten bei der Planung und Berechnung von oberfl{\"a}chennahen thermo-aktiven Bauteilen},
  series = {Geotechnik},
  volume    = {38},
  journal   = {Geotechnik},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2190-6653},
  doi       = {10.1002/gete.201500002},
  pages     = {107 -- 119},
  year      = {2015},
  language  = {de}
}
@article{LandersKern2011,
  author    = {Landers, Ernst Ulrich and Kern, Alexander},
  title     = {Future evolution of risk management for structures : Advancement for the future IEC 62305-2 Ed3},
  publisher = {IEEE},
  address   = {New York},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@article{LueckGerlingPredel1989,
  author    = {L{\"u}ck, Reinhard and Gerling, Ulrich and Predel, Bruno},
  title     = {An entropy paradox of the association model},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 80, H. 4},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 80, H. 4},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {270 -- 275},
  year      = {1989},
  language  = {en}
}
@article{LueckGerlingPredel1987,
  author    = {L{\"u}ck, Reinhard and Gerling, Ulrich and Predel, Bruno},
  title     = {Welchen Einfluss hat die Assoziatgroesse auf die thermodynamischen Mischungsfunktionen fluessiger Metallegierungen?},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 78, H. 10},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 78, H. 10},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {697 -- 699},
  year      = {1987},
  language  = {de}
}
@article{LueckGerlingPredel1986,
  author    = {L{\"u}ck, Reinhard and Gerling, Ulrich and Predel, Bruno},
  title     = {Assoziation in Mehrstoffsystemen},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 10},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 10},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {667 -- 672},
  year      = {1986},
  language  = {de}
}
@article{LueckGerlingPredel1986,
  author    = {L{\"u}ck, Reinhard and Gerling, Ulrich and Predel, Bruno},
  title     = {{\"U}ber die Interpolation thermodynamischer Mischfunktionen h{\"o}herkomponentiger Systeme aus bin{\"a}ren Randsystemen},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 7},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 7},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {442 -- 448},
  year      = {1986},
  language  = {de}
}
@article{LueckGerlingPredel1986,
  author    = {L{\"u}ck, Reinhard and Gerling, Ulrich and Predel, Bruno},
  title     = {Die Konfigurationsentropie fl{\"u}ssiger Legierungen},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 3},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 3},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {140 -- 144},
  year      = {1986},
  language  = {de}
}
@article{MaezawaFoerster2003,
  author    = {Maezawa, Koichi and F{\"o}rster, Arnold},
  title     = {Quantum transport devices based on resonant tunneling},
  series = {Nanoelectronics and information technology : advanced electronic materials and novel devices / Rainer Waser (ed.).},
  journal   = {Nanoelectronics and information technology : advanced electronic materials and novel devices / Rainer Waser (ed.).},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  isbn      = {3-527-40363-9},
  pages     = {407 -- 424},
  year      = {2003},
  language  = {en}
}
@article{MahmoudiFleischhakerSahraietal.2008,
  author    = {Mahmoudi, Mohammad and Fleischhaker, Robert and Sahrai, Mostafa and Evers, J{\"o}rg},
  title     = {Group velocity control in the ultraviolet domain via interacting dark-state resonances},
  series = {Journal of physics B: Atomic, molecular and optical physics},
  volume    = {41},
  journal   = {Journal of physics B: Atomic, molecular and optical physics},
  number    = {2},
  issn      = {0953-4075},
  doi       = {10.1088/0953-4075/41/2/025504},
  pages     = {25504 -- 25600},
  year      = {2008},
  language  = {en}
}
@article{MakovickaGaertnerHardtetal.1997,
  author    = {Makovicka, C. and G{\"a}rtner, G. and Hardt, Arno and Hermann, W. and Wiechert, D. U.},
  title     = {Impregnated cathode surface investigations by SFM/STM and SEM/EDX},
  series = {Applied surface science. Vol. 111},
  journal   = {Applied surface science. Vol. 111},
  issn      = {1873-5584 (E-Journal); 0169-4332 (Print)},
  pages     = {70 -- 75},
  year      = {1997},
  language  = {en}
}
@article{MarinkovicButenweg2020,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Ausfachungen aus Ziegelmauerwerk in Stahlbetonrahmentragwerken unter Erdbebenbeanspruchung},
  series = {Mauerwerk},
  volume    = {24},
  journal   = {Mauerwerk},
  number    = {4},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022},
  doi       = {10.1002/dama.202000011},
  pages     = {194 -- 205},
  year      = {2020},
  abstract  = {Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk weisen nach Erdbeben h{\"a}ufig schwere Sch{\"a}den auf. Gr{\"u}nde hierf{\"u}r sind die Beanspruchungen der Ausfachungsw{\"a}nde durch die aufgezwungenen Rahmenverformungen in Wandebene und die gleichzeitig auftretenden Tr{\"a}gheitskr{\"a}fte senkrecht zur Wandebene in Kombination mit der konstruktiven Ausf{\"u}hrung des Ausfachungsmauerwerks. Die Ausfachung wird in der Regel knirsch gegen die Rahmenst{\"u}tzen gemauert, wobei der Verschluss der oberen Fuge mit M{\"o}rtel oder Montageschaum erfolgt. Dadurch kommt es im Erdbebenfall zu lokalen Interaktionen zwischen Ausfachung und Rahmen, die in der Folge zu einem Versagen einzelner Ausfachungsw{\"a}nde oder zu einem sukzessiven Versagen des Gesamtgeb{\"a}udes f{\"u}hren k{\"o}nnen. Die beobachteten Sch{\"a}den waren die Motivation daf{\"u}r, in dem europ{\"a}ischen Forschungsprojekt INSYSME f{\"u}r Stahlbetonrahmentragwerke mit Ausfachungen aus hochw{\"a}rmed{\"a}mmenden Ziegelmauerwerk innovative L{\"o}sungen zur Verbesserung des seismischen Verhaltens zu entwickeln. Der vorliegende Beitrag stellt die im Rahmen des Projekts von den deutschen Projektpartnern (Universit{\"a}t Kassel, SDA-engineering GmbH) entwickelten L{\"o}sungen vor und vergleicht deren seismisches Verhalten mit der traditionellen Ausf{\"u}hrung der Ausfachungsw{\"a}nde. Grundlage f{\"u}r den Vergleich sind statisch-zyklische Wandversuche und Simulationen auf Wandebene. Aus den Ergebnissen werden Empfehlungen f{\"u}r die erdbebensichere Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk abgeleitet.},
  language  = {de}
}
@article{MarinkovicButenweg2020,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Earthquake-proof system for masonry infills in RC frame structures},
  series = {International Journal of Masonry Research and Innovation},
  volume    = {5},
  journal   = {International Journal of Masonry Research and Innovation},
  number    = {2},
  publisher = {Inderscience Enterprises},
  address   = {Olney, Bucks},
  issn      = {2056-9467},
  doi       = {10.1504/IJMRI.2020.106328},
  pages     = {185 -- 208},
  year      = {2020},
  language  = {de}
}
@article{MarinkovicButenweg2019,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames},
  series = {Engineering Structures},
  volume    = {197},
  journal   = {Engineering Structures},
  number    = {Article 109435},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2019.109435},
  year      = {2019},
  language  = {en}
}
@article{MarinkovicButenweg2022,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Numerical analysis of the in-plane behaviour of decoupled masonry infilled RC frames},
  series = {Engineering Structures},
  volume    = {272},
  journal   = {Engineering Structures},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2022.114959},
  pages     = {18 Seiten},
  year      = {2022},
  abstract  = {Damage of reinforced concrete (RC) frames with masonry infill walls has been observed after many earthquakes. Brittle behaviour of the masonry infills in combination with the ductile behaviour of the RC frames makes infill walls prone to damage during earthquakes. Interstory deformations lead to an interaction between the infill and the RC frame, which affects the structural response. The result of this interaction is significant damage to the infill wall and sometimes to the surrounding structural system too. In most design codes, infill walls are considered as non-structural elements and neglected in the design process, because taking into account the infills and considering the interaction between frame and infill in software packages can be complicated and impractical. A good way to avoid negative aspects arising from this behavior is to ensure no or low-interaction of the frame and infill wall, for instance by decoupling the infill from the frame. This paper presents the numerical study performed to investigate new connection system called INODIS (Innovative Decoupled Infill System) for decoupling infill walls from surrounding frame with the aim to postpone infill activation to high interstory drifts thus reducing infill/frame interaction and minimizing damage to both infills and frames. The experimental results are first used for calibration and validation of the numerical model, which is then employed for investigating the influence of the material parameters as well as infill's and frame's geometry on the in-plane behaviour of the infilled frames with the INODIS system. For all the investigated situations, simulation results show significant improvements in behaviour for decoupled infilled RC frames in comparison to the traditionally infilled frames.},
  language  = {en}
}
@article{MarinkovićButenweg2022,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading},
  series = {Construction and Building Materials},
  volume    = {318},
  journal   = {Construction and Building Materials},
  number    = {1},
  editor    = {Ford, Michael C.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0526},
  doi       = {10.1016/j.conbuildmat.2021.126041},
  year      = {2022},
  abstract  = {Because of simple construction process, high energy efficiency, significant fire resistance and excellent sound isolation, masonry infilled reinforced concrete (RC) frame structures are very popular in most of the countries in the world, as well as in seismic active areas. However, many RC frame structures with masonry infills were seriously damaged during earthquake events, as the traditional infills are generally constructed with direct contact to the RC frame which brings undesirable infill/frame interaction. This interaction leads to the activation of the equivalent diagonal strut in the infill panel, due to the RC frame deformation, and combined with seismically induced loads perpendicular to the infill panel often causes total collapses of the masonry infills and heavy damages to the RC frames. This fact was the motivation for developing different approaches for improving the behaviour of masonry infills, where infill isolation (decoupling) from the frame has been more intensively studied in the last decade. In-plane isolation of the infill wall reduces infill activation, but causes the need for additional measures to restrain out-of-plane movements. This can be provided by installing steel anchors, as proposed by some researchers. Within the framework of European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in Reinforced Concrete Buildings) the system based on a use of elastomers for in-plane decoupling and steel anchors for out-of-plane restrain was tested. This constructive solution was tested and deeply investigated during the experimental campaign where traditional and decoupled masonry infilled RC frames with anchors were subjected to separate and combined in-plane ‬and out-of-plane loading. Based on a detailed evaluation and comparison of the test results, the performance and effectiveness of the developed system are illustrated.},
  language  = {en}
}
@article{MarinkovićFloresCalvinistiButenweg2020,
  author    = {Marinković, Marko and Flores Calvinisti, Santiago and Butenweg, Christoph},
  title     = {Numerical analysis of reinforced concrete frame buildings with decoupled infill walls},
  series = {Building Materials and Structures},
  volume    = {63},
  journal   = {Building Materials and Structures},
  number    = {4},
  publisher = {Society for Materials and Structures Testing of Serbia},
  address   = {Belgrad},
  issn      = {2217-8139},
  doi       = {10.5937/GRMK2004013M},
  pages     = {13 -- 48},
  year      = {2020},
  abstract  = {Reinforced concrete (RC) buildings with masonry infill walls are widely used in many countries all over the world. Although infills are considered as non-structural elements, they significantly change dynamic characteristics of RC frame structures during earthquake excitation. Recently, significant effort was spent on studying decoupled infills, which are isolated from the surrounding frame usually by adding a gap between frame and infill. In this case, the frame deformation does not activate infill wall, thus infills are not influencing the behaviour of the frame. This paper presents the results of the investigation of the behaviour of RC frame buildings with the INODIS system that decouples masonry infills from the surrounding frame. Effect of masonry infill decoupling was investigated first on the one-bay onestorey frame. This was used as a base for parametric study on the frames with more bays and storeys, as well as on the building level. Change of stiffness and dynamic characteristics was analysed as well as response under earthquake loading. Comparison with the bare frame and traditionally infilled frame was performed. The results show that behaviour of the decoupled infilled frames is similar to the bare frame, whereas behaviour of frames with traditional infills is significantly different and demands complex numerical models. This means that if adequate decoupling is applied, design of},
  language  = {mul}
}
@article{MartinBergHackeretal.1985,
  author    = {Martin, S. A. and Berg, G. P. A. and Hacker, U. and Hardt, Arno and K{\"o}hler, M. and Meißburger, J. and Osterfeld, F. and Prasuhn, D. and Riepe, G. and Rogge, M. and Schult, O. W. B. and Speth, J. and Turek, P. and Gaul, G. and Hagedoorn, H. and Heide, J. A. van der and Hinterberger, F. and Huber, M. and Jahn, R. and Mayer-Kuckuk, T. and Poth, H. and Paetz gen. Schieck, H.},
  title     = {COSY - a cooler synchrotron and storage ring},
  series = {IEEE transactions on nuclear science. Vol. 32, iss. 5},
  journal   = {IEEE transactions on nuclear science. Vol. 32, iss. 5},
  issn      = {1558-1578 (E-Journal); 0018-9499 (Print)},
  pages     = {2694 -- 2696},
  year      = {1985},
  language  = {en}
}
@article{MarxSchenkBehrensetal.2013,
  author    = {Marx, Ulrich and Schenk, Friedrich and Behrens, Jan and Meyr, Ulrike and Wanek, Paul and Zang, Werner and Schmitt, Robert and Br{\"u}stle, Oliver and Zenke, Martin and Klocke, Fritz},
  title     = {Automatic production of induced pluripotent stem cells},
  series = {Procedia CIRP : First CIRP Conference on BioManufacturing},
  volume    = {Vol. 5},
  journal   = {Procedia CIRP : First CIRP Conference on BioManufacturing},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  pages     = {2 -- 6},
  year      = {2013},
  language  = {en}
}
@article{MeissenKrischer1978,
  author    = {Meißen, Ralf and Krischer, C.},
  title     = {Elektronische Fernsehlesehilfe f{\"u}r hochgradig sehbehinderte},
  series = {Biomedical Engineering / Biomedizinische Technik},
  volume    = {23},
  journal   = {Biomedical Engineering / Biomedizinische Technik},
  number    = {s1},
  publisher = {De Gruyter},
  address   = {Berlin},
  doi       = {10.1515/bmte.1978.23.s1.220},
  pages     = {220 -- 221},
  year      = {1978},
  language  = {de}
}
@article{MelissOesterwindVoss1975,
  author    = {Meliß, Michael and Oesterwind, Dieter and Voß, Alfred},
  title     = {Non-nuclear and non-fossil energy resources and their possibilities for future power generation},
  series = {Kerntechnik},
  volume    = {17},
  journal   = {Kerntechnik},
  number    = {7},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {0932-3902},
  doi       = {10.18419/opus-8093},
  pages     = {301 -- 306},
  year      = {1975},
  abstract  = {It must be stressed that the assessment of the exploitation possibilities of the energy resources discussed in this paper requires further studies. With this proviso, the situation can be provisionally summarised as follows: The total potential of known geothermal steam sources is only 64 GW. Geothermal energy could therefore only make a significant contribution to covering the worldwide power needs if we succeed in exploiting dry geothermal reservoirs. Exploitation of tidal energy is limited to a few geographically favourable locations. The power generation potential at these locations is only about 64 GW. An important drawback of tidal power is discontinuous power generation. Large scale exploitation of wind, wave and glacier energy, and of ocean heat, requires solution of a number of technological problems. The environmental effects of exploitation of these energy resources are to some extent of a qualitatively different nature from those of operation of fossil-fuel-fired and of nuclear power plants. The scanty knowledge in this area often results in these effects being underestimated. In any case, however, it would be deliberately misleading to postulate that any form of power generation is possible without some detrimental effects on the environment. It may be stated in conclusion that, owing to their small potential or to the as yet insufficiently advanced technological development, none of the energy resources discussed in this paper can make a significant contribution to the solution of middle-term energy supply problems, i.e., to a rapid replacement of mineral oil and natural gas.},
  language  = {en}
}
@article{MeskourisButenwegGellert2009,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Gellert, Christoph},
  title     = {Iterativ verbessert : die RWTH Aachen entwickelt eine Software f{\"u}r einfache Nachweise von Mauerwerksbauten in Erdbebengebieten},
  series = {Deutsches Ingenieur-Blatt : Ingenieurwesen, Bautechnik, Umweltschutz ; Organ der deutschen Ingenieurkammern / Hrsg.: Bundes-Ingenieurkammer e.V.},
  journal   = {Deutsches Ingenieur-Blatt : Ingenieurwesen, Bautechnik, Umweltschutz ; Organ der deutschen Ingenieurkammern / Hrsg.: Bundes-Ingenieurkammer e.V.},
  number    = {Heft 5},
  publisher = {Rauh Medien GmbH},
  address   = {Wandlitz},
  issn      = {2365-192X},
  pages     = {31 -- 36},
  year      = {2009},
  language  = {de}
}
@article{MeskourisButenwegGellert2009,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Gellert, Christoph},
  title     = {Einfache Nachweise : einige Beispiele f{\"u}r die Anwendung des Bemessungsprogramms der RWTH Aachen f{\"u}r den Nachweis von Mauerwerksbauten in Erdbebengebieten},
  series = {Deutsches Ingenieur-Blatt : Ingenieurwesen, Bautechnik, Umweltschutz ; Organ der deutschen Ingenieurkammern / Hrsg.: Bundes-Ingenieurkammer e.V.},
  journal   = {Deutsches Ingenieur-Blatt : Ingenieurwesen, Bautechnik, Umweltschutz ; Organ der deutschen Ingenieurkammern / Hrsg.: Bundes-Ingenieurkammer e.V.},
  number    = {Heft 6},
  publisher = {Rauh Medien GmbH},
  address   = {Wandlitz},
  issn      = {0946-2422},
  pages     = {26 -- 29},
  year      = {2009},
  language  = {de}
}
@article{MeskourisButenwegRenault2006,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Renault, Philippe},
  title     = {Beurteilung der Erdbebensicherheit von bestehenden Bauwerken},
  series = {Der Pr{\"u}fingenieur : das Magazin der Bundesvereinigung der Pr{\"u}fingenieure f{\"u}r Bautechnik},
  journal   = {Der Pr{\"u}fingenieur : das Magazin der Bundesvereinigung der Pr{\"u}fingenieure f{\"u}r Bautechnik},
  number    = {Ausgabe 28},
  issn      = {1430-9084},
  pages     = {56 -- 65},
  year      = {2006},
  language  = {de}
}
@article{MeskourisButenwegRenault2006,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Renault, Philippe},
  title     = {Mehrstufen-Konzept f{\"u}r mehr Erdbebensicherheit : ein Werkzeug f{\"u}r die Beurteilung der Erdbebengef{\"a}hrdung von Ingenieurbauwerken},
  series = {Deutsches Ingenieurblatt},
  volume    = {Band 13},
  journal   = {Deutsches Ingenieurblatt},
  number    = {Heft 6},
  issn      = {0946-2422},
  pages     = {18 -- 26},
  year      = {2006},
  language  = {de}
}
@article{MeyerButenwegFehling2014,
  author    = {Meyer, Udo and Butenweg, Christoph and Fehling, Ekkehard},
  title     = {EU-Projekt INSYSME : innovative Systeme f{\"u}r erdbebentaugliche Ausfachungsw{\"a}nde aus Ziegelmauerwerk},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {89 (2014)},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  number    = {April},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S14 -- S15},
  year      = {2014},
  language  = {de}
}
@article{MichelButenwegKlinkel2020,
  author    = {Michel, P. and Butenweg, Christoph and Klinkel, S.},
  title     = {Einfluss der dynamischen Steifigkeit von Flach-und Pfahlgr{\"u}ndungen auf die Dynamik von Onshore-Windenergieanlagen},
  series = {Bauingenieur},
  volume    = {95},
  journal   = {Bauingenieur},
  number    = {4},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {139 -- 146},
  year      = {2020},
  language  = {de}
}
@article{MichelButenwegKinkel2018,
  author    = {Michel, Philipp and Butenweg, Christoph and Kinkel, Sven},
  title     = {Pile-grid foundations of onshore wind turbines considering soil-structure-interaction under seismic loading},
  series = {Soil Dynamics and Earthquake Engineering},
  volume    = {109},
  journal   = {Soil Dynamics and Earthquake Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0267-7261},
  doi       = {10.1016/j.soildyn.2018.03.009},
  pages     = {299 -- 311},
  year      = {2018},
  abstract  = {In recent years, many onshore wind turbines are erected in seismic active regions and on soils with poor load bearing capacity, where pile grids are inevitable to transfer the loads into the ground. In this contribution, a realistic multi pile grid is designed to analyze the dynamics of a wind turbine tower including frequency dependent soil-structure-interaction. It turns out that different foundations on varying soil configurations heavily influence the vibration response. While the vibration amplitude is mostly attenuated, certain unfavorable combinations of structure and soil parameters lead to amplification in the range of the system's natural frequencies. This testifies the need for overall dynamic analysis in the assessment of the dynamic stability and the holistic frequency tuning of the turbines.},
  language  = {en}
}
@article{MikulicsAdamKordosetal.2005,
  author    = {Mikulics, M. and Adam, R. and Kordos, P. and F{\"o}rster, Arnold and L{\"u}th, H. and Wu, S. and Zheng, X. and Sobolewski, R.},
  title     = {Ultrafast low-temperature-grown epitaxial GaAs photodetectors transferred on flexible plastic substrates},
  series = {IEEE photonics technology letters : IEEE PTL. 17 (2005), H. 8},
  journal   = {IEEE photonics technology letters : IEEE PTL. 17 (2005), H. 8},
  isbn      = {1041-1135},
  pages     = {1725 -- 1727},
  year      = {2005},
  language  = {en}
}
@article{MikulicsCamaraHardtetal.2004,
  author    = {Mikulics, M. and Camara, I. and Hardt, A. van der and Fox, A. and F{\"o}rster, Arnold and Gusten, R. and L{\"u}th, H. and Kordos, P.},
  title     = {Generation of THz radiation by photomixing in low-temperature-grown MBE GaAs},
  series = {Fifth International Conference on Advanced Semiconductor Devices and Microsystems : conference proceedings ; Smolenice Castle, Slovakia, October 17 - 21, 2004 / [organizers: Institute of Electrical Engineering, Slovak Academy of Sciences, Bratislava and Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by J. Osvald},
  journal   = {Fifth International Conference on Advanced Semiconductor Devices and Microsystems : conference proceedings ; Smolenice Castle, Slovakia, October 17 - 21, 2004 / [organizers: Institute of Electrical Engineering, Slovak Academy of Sciences, Bratislava and Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by J. Osvald},
  publisher = {IEEE Operations Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-8335-7},
  pages     = {231 -- 234},
  year      = {2004},
  language  = {en}
}
@article{MikulicsMarsoCamaraMayorgaetal.2005,
  author    = {Mikulics, M. and Marso, M. and C{\´a}mara Mayorga, I. and Gusten, R. and Stancek, S. and Michael, E. A. and Schieder, R. and Wolter, M. and Buca, D. and F{\"o}rster, Arnold and Kordos, P. and L{\"u}th, H.},
  title     = {Photomixers fabricated on nitrogen-ion-implanted GaAs},
  series = {Applied physics letters. 87 (2005)},
  journal   = {Applied physics letters. 87 (2005)},
  pages     = {041106-1 -- 041106-3},
  year      = {2005},
  language  = {en}
}
@article{MistlerAnthoineButenweg2007,
  author    = {Mistler, Michael and Anthoine, A. and Butenweg, Christoph},
  title     = {In-plane and out-of-plane homogenisation of masonry},
  series = {Computers \& structures},
  volume    = {Volume 85},
  journal   = {Computers \& structures},
  number    = {Issues 17-18},
  issn      = {1879-2243 (E-Journal); 0045-7949 (Print)},
  doi       = {10.1016/j.compstruc.2006.08.087},
  pages     = {1321 -- 1330},
  year      = {2007},
  language  = {en}
}
@article{MistlerButenweg2005,
  author    = {Mistler, Michael and Butenweg, Christoph},
  title     = {Verformungsbasierter seismischer Nachweis von Mauerwerksbauten mit der Kapazit{\"a}tsspektrum-Methode},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 9},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 6},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.200590098},
  pages     = {255 -- 261},
  year      = {2005},
  language  = {de}
}
@article{MistlerButenwegFehlingetal.2007,
  author    = {Mistler, Michael and Butenweg, Christoph and Fehling, Ekkehard and St{\"u}rz, Jochen},
  title     = {Verformungsbasierte seismische Bemessung von Mauerwerksbauten auf Grundlage zyklischer Schubwandversuche},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {Band 82},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  issn      = {1434-6591},
  pages     = {S3 -- S11},
  year      = {2007},
  language  = {de}
}
@article{MistlerButenwegMeskouris2006,
  author    = {Mistler, Michael and Butenweg, Christoph and Meskouris, Konstantin},
  title     = {Modelling methods of historic masonry buildings under seismic excitation},
  series = {Journal of seismology},
  volume    = {Volume 10},
  journal   = {Journal of seismology},
  number    = {No. 4},
  issn      = {1383-4649 (Print) ; 1573-157X (E-Journal)},
  doi       = {10.1007/s10950-006-9033-z},
  pages     = {497 -- 510},
  year      = {2006},
  language  = {en}
}
@article{Mohnke1987,
  author    = {Mohnke, Andreas},
  title     = {High-rate sputtering of zinc oxide with a funnel-shaped magnetic field: Effect of the target thickness on the layer properties},
  series = {Vakuum-Technik. 36 (1987), H. 5},
  journal   = {Vakuum-Technik. 36 (1987), H. 5},
  isbn      = {0042-2266},
  pages     = {148 -- 151},
  year      = {1987},
  language  = {en}
}
@article{Mohnke1985,
  author    = {Mohnke, Andreas},
  title     = {Kathodenzerst{\"a}ubung von Zinkoxid f{\"u}r die Akustoelektronik},
  series = {Universit{\"a}t <Halle, Saale>: Wissenschaftliche Beitr{\"a}ge : WB (1985)},
  journal   = {Universit{\"a}t <Halle, Saale>: Wissenschaftliche Beitr{\"a}ge : WB (1985)},
  isbn      = {0440-1298},
  pages     = {94 -- 95},
  year      = {1985},
  language  = {de}
}
@article{MohnkeSchuckel1986,
  author    = {Mohnke, Andreas and Schuckel, G.},
  title     = {Tempern von Oberfl{\"a}chenwellenwandlern in Schichtstruktur},
  series = {Technische Hochschule Ilmenau / Bibliothek: Wissenschaftliche Zeitschrift. 32 (1986), H. 3},
  journal   = {Technische Hochschule Ilmenau / Bibliothek: Wissenschaftliche Zeitschrift. 32 (1986), H. 3},
  isbn      = {0043-6917},
  pages     = {151 -- 160},
  year      = {1986},
  language  = {de}
}
@article{MohnkeSchuckel1985,
  author    = {Mohnke, Andreas and Schuckel, G.},
  title     = {Eigenschaften des Schichtsystems ZnO/Glas f{\"u}r die Mikroakustik. Schuckel, G.; Mohnke, A.},
  series = {Technische Hochschule Ilmenau / Bibliothek: Wissenschaftliche Zeitschrift. 31 (1985), H. 4},
  journal   = {Technische Hochschule Ilmenau / Bibliothek: Wissenschaftliche Zeitschrift. 31 (1985), H. 4},
  isbn      = {0043-6917},
  pages     = {157 -- 164},
  year      = {1985},
  language  = {de}
}
@article{MorandiButenwegBreisetal.2022,
  author    = {Morandi, Paolo and Butenweg, Christoph and Breis, Khaled and Beyer, Katrin and Magenes, Guido},
  title     = {Latest findings on the behaviour factor q for the seismic design of URM buildings},
  series = {Bulletin of Earthquake Engineering},
  volume    = {20},
  journal   = {Bulletin of Earthquake Engineering},
  number    = {11},
  editor    = {Ansal, Atilla},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-022-01419-7},
  pages     = {5797 -- 5848},
  year      = {2022},
  abstract  = {Recent earthquakes as the 2012 Emilia earthquake sequence showed that recently built unreinforced masonry (URM) buildings behaved much better than expected and sustained, despite the maximum PGA values ranged between 0.20-0.30 g, either minor damage or structural damage that is deemed repairable. Especially low-rise residential and commercial masonry buildings with a code-conforming seismic design and detailing behaved in general very well without substantial damages. The low damage grades of modern masonry buildings that was observed during this earthquake series highlighted again that codified design procedures based on linear analysis can be rather conservative. Although advances in simulation tools make nonlinear calculation methods more readily accessible to designers, linear analyses will still be the standard design method for years to come. The present paper aims to improve the linear seismic design method by providing a proper definition of the q-factor of URM buildings. These q-factors are derived for low-rise URM buildings with rigid diaphragms which represent recent construction practise in low to moderate seismic areas of Italy and Germany. The behaviour factor components for deformation and energy dissipation capacity and for overstrength due to the redistribution of forces are derived by means of pushover analyses. Furthermore, considerations on the behaviour factor component due to other sources of overstrength in masonry buildings are presented. As a result of the investigations, rationally based values of the behaviour factor q to be used in linear analyses in the range of 2.0-3.0 are proposed.},
  language  = {en}
}
@article{MottaghyPechnig2009,
  author    = {Mottaghy, Darius and Pechnig, Renate},
  title     = {Numerische 3D Modelle zur Temperaturvorhersage und Reservoirsimulationen},
  series = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  volume    = {60},
  journal   = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  number    = {10},
  pages     = {44 -- 51},
  year      = {2009},
  language  = {de}
}
@article{MottaghyPechnigTaugsetal.2010,
  author    = {Mottaghy, Darius and Pechnig, Renate and Taugs, Renate and Kr{\"o}ger, Jens and Thomsen, Claudia and Hesse, Fabian and Liebsch-Doerschner, Thomas},
  title     = {Erstellung eines geothermischen Modells f{\"u}r Teile Hamburgs und anliegende Gebiete},
  series = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  volume    = {61},
  journal   = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  number    = {12},
  publisher = {WVGW Wirtschafts- u. Verl.Ges. Gas und Wasser},
  address   = {Bonn},
  issn      = {1611-1478},
  pages     = {52 -- 59},
  year      = {2010},
  language  = {de}
}
@article{MottaghyPechnigVogt2011,
  author    = {Mottaghy, Darius and Pechnig, Renate and Vogt, Christian},
  title     = {The geothermal project Den Haag: 3D numerical models for temperature prediction and reservoir simulation},
  series = {Geothermics},
  volume    = {40},
  journal   = {Geothermics},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0375-6505},
  doi       = {10.1016/j.geothermics.2011.07.001},
  pages     = {199 -- 210},
  year      = {2011},
  abstract  = {The proposed Den Haag Zuidwest district heating system of the city of The Hague consists of a deep doublet in a Jurassic sandstone layer that is designed for a production temperature of 75 °C and a reinjection temperature of 40 °C at a flow rate of 150 m3 h-1. The prediction of reservoir temperature and production behavior is crucial for success of the proposed geothermal doublet. This work presents the results of a study of the important geothermal and geohydrological issues for the doublet design. In the first phase of the study, the influences of the three-dimensional (3D) structures of anticlines and synclines on the temperature field were examined. A comprehensive petrophysical investigation was performed to build a large scale 3D-model of the reservoir. Several bottomhole temperatures (BHTs), as well as petrophysical logs were used to calibrate the model using thermal conductivity measurements on 50 samples from boreholes in different lithological units in the study area. Profiles and cross sections extracted from the calculated temperature field were used to study the temperature in the surrounding areas of the planned doublet. In the second phase of the project, a detailed 3D numerical reservoir model was set up, with the aim of predicting the evolution of the producer and injector temperatures, and the extent of the cooled area around the injector. The temperature model from the first phase provided the boundary conditions for the reservoir model. Hydraulic parameters for the target horizons, such as porosity and permeability, were taken from data available from the nearby exploration wells. The simulation results are encouraging as no significant thermal breakthrough is predicted. For the originally planned location of the producer, the extracted water temperature is predicted to be around 79 °C, with an almost negligible cooling in the first 50 years of production. When the producer is located shallower parts of the reservoir, the yield water temperatures is lower, starting at ≈76 °C and decreasing to ≈74 °C after 50 years of operation. This comparatively larger decrease in temperature with time is caused by the structural feature of the reservoir, namely a higher dip causes the cooler water to easily move downward. In view of the poor reservoir data, the reservoir simulation model is constructed to allow iterative updates using data assimilation during planned drilling, testing, and production phases. Measurements during an 8 h pumping test carried out in late 2010 suggest that a flow rate of 150 m3 h-1 is achievable. Fluid temperatures of 76.5 °C were measured, which is very close to the predicted value.},
  language  = {en}
}
@article{MottaghyRath2006,
  author    = {Mottaghy, Darius and Rath, Volker},
  title     = {Latent heat effects in subsurface heat transport modelling and their impact on palaeotemperature reconstructions},
  series = {Geophysical Journal International},
  volume    = {164},
  journal   = {Geophysical Journal International},
  number    = {1},
  issn      = {1365-246X},
  doi       = {10.1111/j.1365-246X.2005.02843.x},
  pages     = {236 -- 245},
  year      = {2006},
  language  = {en}
}
@article{MottaghySchellschmidtPopovetal.2005,
  author    = {Mottaghy, Darius and Schellschmidt, R. and Popov, Y. A. and Clauser, C. and Kukkonen, I. T. and Nover, G. and Milanovsky, S. and Romushkevich, R. A.},
  title     = {New heat flow data from the immediate vicinity of the Kola super-deep borehole: Vertical variation in heat flow density confirmed and attributed to advection},
  series = {Tectonophysics},
  volume    = {401},
  journal   = {Tectonophysics},
  number    = {1-2},
  issn      = {1879-3266},
  doi       = {10.1016/j.tecto.2005.03.005},
  pages     = {119 -- 142},
  year      = {2005},
  language  = {en}
}
@article{MottaghySchwambornRath2013,
  author    = {Mottaghy, Darius and Schwamborn, G. and Rath, V.},
  title     = {Past climate changes and permafrost depth at the Lake El'gygytgyn site: implications from data and thermal modeling},
  series = {Climate of the Past},
  volume    = {9},
  journal   = {Climate of the Past},
  number    = {1},
  publisher = {Copernicus},
  address   = {Katlenburg-Lindau},
  issn      = {1814-9332},
  doi       = {10.5194/cp-9-119-2013},
  pages     = {119 -- 133},
  year      = {2013},
  language  = {en}
}
@article{MottaghyVosteenSchellschmidt2008,
  author    = {Mottaghy, Darius and Vosteen, Hans-Dieter and Schellschmidt, R{\"u}diger},
  title     = {Temperature dependence of the relationship of thermal diffusivity versus thermal conductivity for crystalline rocks},
  series = {International Journal of Earth Sciences},
  volume    = {97},
  journal   = {International Journal of Earth Sciences},
  number    = {2},
  issn      = {1437-3262},
  doi       = {10.1007/s00531-007-0238-3},
  pages     = {435 -- 442},
  year      = {2008},
  language  = {en}
}
@article{MykoniouButenwegHoltschoppenetal.2016,
  author    = {Mykoniou, Konstantin and Butenweg, Christoph and Holtschoppen, Britta and Klinkel, Sven},
  title     = {Seismic response analysis of adjacent liquid-storage tanks},
  series = {Earthquake engineering and structural dynamics},
  volume    = {45},
  journal   = {Earthquake engineering and structural dynamics},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1096-9845 (E-Journal); 0098-8847 (Print)},
  doi       = {10.1002/eqe.2726},
  pages     = {1779 -- 1796},
  year      = {2016},
  abstract  = {A refined substructure technique in the frequency domain is developed, which permits consideration of the interaction effects among adjacent containers through the supporting deformable soil medium. The tank-liquid systems are represented by means of mechanical models, whereas discrete springs and dashpots stand for the soil beneath the foundations. The proposed model is employed to assess the responses of adjacent circular, cylindrical tanks for harmonic and seismic excitations over wide range of tank proportions and soil conditions. The influence of the number, spatial arrangement of the containers and their distance on the overall system's behavior is addressed. The results indicate that the cross-interaction effects can substantially alter the impulsive components of response of each individual element in a tank farm. The degree of this impact is primarily controlled by the tank proportions and the proximity of the predominant natural frequencies of the shell-liquid-soil systems and the input seismic motion. The group effects should be not a priori disregarded, unless the tanks are founded on shallow soil deposit overlying very stiff material or bedrock.},
  language  = {en}
}
@article{Mueller2004,
  author    = {M{\"u}ller, Burghard},
  title     = {Export in den Iran, Libanon und nach Indien : die FH Aachen strebt nach Osten},
  series = {Die neue Hochschule : Nachrichten, Meinungen, Berichte. 45 (2004), H. 4-5},
  journal   = {Die neue Hochschule : Nachrichten, Meinungen, Berichte. 45 (2004), H. 4-5},
  isbn      = {0340-448x},
  pages     = {12 -- 15},
  year      = {2004},
  language  = {de}
}
@article{NeubauerJungnickel1993,
  author    = {Neubauer, Boris and Jungnickel, B. J.},
  title     = {Diffusion als Maß f{\"u}r die elektrische Isolier-Dauerfestigkeit von PE. L{\"a}ngs- und Querdiffusion durch transkristalline Oberfl{\"a}chenschichten},
  series = {Kunststoffe. 83 (1993), H. 3},
  journal   = {Kunststoffe. 83 (1993), H. 3},
  isbn      = {0023-5563},
  pages     = {231 -- 233},
  year      = {1993},
  language  = {de}
}
@article{NobisSchmittSchemmetal.2020,
  author    = {Nobis, Moritz and Schmitt, Carlo and Schemm, Ralf and Schnettler, Armin},
  title     = {Pan-European CVAR-constrained stochastic unit commitment in day-ahead and intraday electricity markets},
  series = {Energies},
  volume    = {13},
  journal   = {Energies},
  number    = {Art. 2339},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en13092339},
  pages     = {1 -- 35},
  year      = {2020},
  abstract  = {The fundamental modeling of energy systems through individual unit commitment decisions is crucial for energy system planning. However, current large-scale models are not capable of including uncertainties or even risk-averse behavior arising from forecasting errors of variable renewable energies. However, risks associated with uncertain forecasting errors have become increasingly relevant within the process of decarbonization. The intraday market serves to compensate for these forecasting errors. Thus, the uncertainty of forecasting errors results in uncertain intraday prices and quantities. Therefore, this paper proposes a two-stage risk-constrained stochastic optimization approach to fundamentally model unit commitment decisions facing an uncertain intraday market. By the nesting of Lagrangian relaxation and an extended Benders decomposition, this model can be applied to large-scale, e.g., pan-European, power systems. The approach is applied to scenarios for 2023—considering a full nuclear phase-out in Germany—and 2035—considering a full coal phase-out in Germany. First, the influence of the risk factors is evaluated. Furthermore, an evaluation of the market prices shows an increase in price levels as well as an increasing day-ahead-intraday spread in 2023 and in 2035. Finally, it is shown that intraday cross-border trading has a significant influence on trading volumes and prices and ensures a more efficient allocation of resources.},
  language  = {en}
}
@article{NordaButenweg2011,
  author    = {Norda, Hannah and Butenweg, Christoph},
  title     = {M{\"o}glichkeiten und Grenzen der Anwendbarkeit statisch nichtlinearer Verfahren nach DIN EN 1998-1},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {Band 86},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S13 -- S21},
  year      = {2011},
  language  = {de}
}
@article{PauksztatKuperjansMeyer2005,
  author    = {Pauksztat, Anja and Kuperjans, Isabel and Meyer, J{\"o}rg},
  title     = {Formeln statt Zahlen : Referenzwerte Formeln zur energetischen Bewertung von Produktionsanlagen},
  series = {BWK : das Energie-Fachmagazin},
  volume    = {57},
  journal   = {BWK : das Energie-Fachmagazin},
  number    = {12},
  issn      = {0006-9612},
  pages     = {52 -- 55},
  year      = {2005},
  language  = {de}
}
@article{PauksztatKuperjansMeyer2005,
  author    = {Pauksztat, Anja and Kuperjans, Isabel and Meyer, J{\"o}rg},
  title     = {Produktbezogene Referenzwerte f{\"u}r Energieeffizienz und CO2-Emissionen},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {55},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  number    = {6},
  issn      = {0013-743X},
  pages     = {374 -- 376},
  year      = {2005},
  language  = {de}
}
@article{Pieper2009,
  author    = {Pieper, Martin},
  title     = {Vector hyperinterpolation on the sphere},
  series = {Journal of approximation theory. 156 (2009), H. 2},
  journal   = {Journal of approximation theory. 156 (2009), H. 2},
  isbn      = {0021-9045},
  pages     = {173 -- 186},
  year      = {2009},
  language  = {en}
}
@article{Pieper2008,
  author    = {Pieper, Martin},
  title     = {Nonlinear integral equations for an inverse electromagnetic scattering problem},
  series = {Journal of Physics Conference Series. 124 (2008)},
  journal   = {Journal of Physics Conference Series. 124 (2008)},
  isbn      = {1742-6596},
  year      = {2008},
  language  = {en}
}
@article{Pieper2011,
  author    = {Pieper, Martin},
  title     = {Multiobjective optimization with expensive objectives applied to a thermodynamic material design problem},
  series = {Proceedings in applied mathematics and mechanics : PAMM. 11 (2011), H. 1},
  journal   = {Proceedings in applied mathematics and mechanics : PAMM. 11 (2011), H. 1},
  publisher = {Wiley},
  address   = {Weinheim},
  isbn      = {1617-7061},
  pages     = {733 -- 734},
  year      = {2011},
  language  = {en}
}