@inproceedings{KronigerHorikawaFunkeetal.2021,
  author    = {Kroniger, Daniel and Horikawa, Atsushi and Funke, Harald and Pf{\"a}ffle, Franziska},
  title     = {Numerical investigation of micromix hydrogen flames at different combustor pressure levels},
  series = {The Proceedings of the International Conference on Power Engineering (ICOPE)},
  booktitle = {The Proceedings of the International Conference on Power Engineering (ICOPE)},
  doi       = {10.1299/jsmeicope.2021.15.2021-0237},
  pages     = {4 Seiten},
  year      = {2021},
  abstract  = {This study investigates the influence of pressure on the temperature distribution of the micromix (MMX) hydrogen flame and the NOx emissions. A steady computational fluid dynamic (CFD) analysis is performed by simulating a reactive flow with a detailed chemical reaction model. The numerical analysis is validated based on experimental investigations. A quantitative correlation is parametrized based on the numerical results. We find, that the flame initiation point shifts with increasing pressure from anchoring behind a downstream located bluff body towards anchoring upstream at the hydrogen jet. The numerical NOx emissions trend regarding to a variation of pressure is in good agreement with the experimental results. The pressure has an impact on both, the residence time within the maximum temperature region and on the peak temperature itself. In conclusion, the numerical model proved to be adequate for future prototype design exploration studies targeting on improving the operating range.},
  language  = {en}
}
@inproceedings{Dachwald2004,
  author    = {Dachwald, Bernd},
  title     = {Solar sail performance requirements for missions to the outer solar system and beyond},
  series = {55th International Astronautical Congress 2004},
  booktitle = {55th International Astronautical Congress 2004},
  doi       = {10.2514/6.IAC-04-S.P.11},
  pages     = {1 -- 9},
  year      = {2004},
  abstract  = {Solar sails enable missions to the outer solar system and beyond, although the solar radiation pressure decreases with the square of solar distance. For such missions, the solar sail may gain a large amount of energy by first making one or more close approaches to the sun. Within this paper, optimal trajectories for solar sail missions to the outer planets and into near interstellar space (200 AU) are presented. Thereby, it is shown that even near/medium-term solar sails with relatively moderate performance allow reasonable transfer times to the boundaries of the solar system.},
  language  = {en}
}
@article{PeloniCeriottiDachwald2016,
  author    = {Peloni, Alessandro and Ceriotti, Matteo and Dachwald, Bernd},
  title     = {Solar-sail trajectory design for a multiple near-earth-asteroid rendezvous mission},
  series = {Journal of Guidance, Control, and Dynamics},
  volume    = {39},
  journal   = {Journal of Guidance, Control, and Dynamics},
  number    = {12},
  publisher = {AIAA},
  address   = {Reston, Va.},
  issn      = {0731-5090},
  doi       = {10.2514/1.G000470},
  pages     = {2712 -- 2724},
  year      = {2016},
  abstract  = {The scientific interest for near-Earth asteroids as well as the interest in potentially hazardous asteroids from the perspective of planetary defense led the space community to focus on near-Earth asteroid mission studies. A multiple near-Earth asteroid rendezvous mission with close-up observations of several objects can help to improve the characterization of these asteroids. This work explores the design of a solar-sail spacecraft for such a mission, focusing on the search of possible sequences of encounters and the trajectory optimization. This is done in two sequential steps: a sequence search by means of a simplified trajectory model and a set of heuristic rules based on astrodynamics, and a subsequent optimization phase. A shape-based approach for solar sailing has been developed and is used for the first phase. The effectiveness of the proposed approach is demonstrated through a fully optimized multiple near-Earth asteroid rendezvous mission. The results show that it is possible to visit five near-Earth asteroids within 10 years with near-term solar-sail technology.},
  language  = {en}
}
@incollection{HoffschmidtAlexopoulosGoettscheetal.2022,
  author    = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and G{\"o}ttsche, Joachim and Sauerborn, Markus and Kaufhold, O.},
  title     = {High Concentration Solar Collectors},
  series = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  booktitle = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-12-819734-9},
  doi       = {10.1016/B978-0-12-819727-1.00058-3},
  pages     = {198 -- 245},
  year      = {2022},
  abstract  = {Solar thermal concentrated power is an emerging technology that provides clean electricity for the growing energy market. To the solar thermal concentrated power plant systems belong the parabolic trough, the Fresnel collector, the solar dish, and the central receiver system. For high-concentration solar collector systems, optical and thermal analysis is essential. There exist a number of measurement techniques and systems for the optical and thermal characterization of the efficiency of solar thermal concentrated systems. For each system, structure, components, and specific characteristics types are described. The chapter presents additionally an outline for the calculation of system performance and operation and maintenance topics. One main focus is set to the models of components and their construction details as well as different types on the market. In the later part of this article, different criteria for the choice of technology are analyzed in detail.},
  language  = {en}
}
@incollection{HoffschmidtAlexopoulosRauetal.2022,
  author    = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and Rau, Christoph and Sattler, Johannes Christoph and Anthrakidis, Anette and Teixeira Boura, Cristiano Jos{\´e} and O'Connor, B. and Chico Caminos, Ricardo Alexander and Rend{\´o}n, C. and Hilger, P.},
  title     = {Concentrating solar power},
  series = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  booktitle = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-12-819734-9},
  pages     = {670 -- 724},
  year      = {2022},
  abstract  = {The focus of this chapter is the production of power and the use of the heat produced from concentrated solar thermal power (CSP) systems. The chapter starts with the general theoretical principles of concentrating systems including the description of the concentration ratio, the energy and mass balance. The power conversion systems is the main part where solar-only operation and the increase in operational hours. Solar-only operation include the use of steam turbines, gas turbines, organic Rankine cycles and solar dishes. The operational hours can be increased with hybridization and with storage. Another important topic is the cogeneration where solar cooling, desalination and of heat usage is described. Many examples of commercial CSP power plants as well as research facilities from the past as well as current installed and in operation are described in detail. The chapter closes with economic and environmental aspects and with the future potential of the development of CSP around the world.},
  language  = {en}
}
@inproceedings{EggertKriska2022,
  author    = {Eggert, Mathias and Kriska, Melina},
  title     = {Gamification for software development processes - relevant affordances and design principles},
  series = {Proceedings of the 55th Hawaii International Conference on System Sciences},
  booktitle = {Proceedings of the 55th Hawaii International Conference on System Sciences},
  publisher = {HICSS Publishing},
  address   = {Honolulu},
  isbn      = {978-0-9981331-5-7},
  doi       = {10.24251/HICSS.2022.200},
  pages     = {1614 -- 1623},
  year      = {2022},
  abstract  = {A Gamified Information System (GIS) implements game concepts and elements, such as affordances and game design principles to motivate people. Based on the idea to develop a GIS to increase the motivation of software developers to perform software quality tasks, the research work at hand aims at investigating relevant requirements from that target group. Therefore, 14 interviews with software development experts are conducted and analyzed. According to the results, software developers prefer the affordances points, narrative storytelling in a multiplayer and a round-based setting. Furthermore, six design principles for the development of a GIS are derived.},
  language  = {en}
}
@article{DefosseKleinschmidtSchmutzetal.2022,
  author    = {Defosse, Jerome and Kleinschmidt, Joris and Schmutz, Axel and Loop, Torsten and Staat, Manfred and Gatzweiler, Karl-Heinz and Wappler, Frank and Schieren, Mark},
  title     = {Dental strain on maxillary incisors during tracheal intubation with double-lumen tubes and different laryngoscopy techniques - a blinded manikin study},
  series = {Journal of Cardiothoracic and Vascular Anesthesia},
  volume    = {36},
  journal   = {Journal of Cardiothoracic and Vascular Anesthesia},
  number    = {8, Part B},
  publisher = {Elsevier},
  address   = {New York, NY},
  issn      = {1053-0770},
  doi       = {10.1053/j.jvca.2022.02.017},
  pages     = {3021 -- 3027},
  year      = {2022},
  language  = {en}
}
@article{MandekarHollandThielenetal.2022,
  author    = {Mandekar, Swati and Holland, Abigail and Thielen, Moritz and Behbahani, Mehdi and Melnykowycz, Mark},
  title     = {Advancing towards Ubiquitous EEG, Correlation of In-Ear EEG with Forehead EEG},
  series = {Sensors},
  volume    = {22},
  journal   = {Sensors},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s22041568},
  pages     = {1 -- 19},
  year      = {2022},
  abstract  = {Wearable EEG has gained popularity in recent years driven by promising uses outside of clinics and research. The ubiquitous application of continuous EEG requires unobtrusive form-factors that are easily acceptable by the end-users. In this progression, wearable EEG systems have been moving from full scalp to forehead and recently to the ear. The aim of this study is to demonstrate that emerging ear-EEG provides similar impedance and signal properties as established forehead EEG. EEG data using eyes-open and closed alpha paradigm were acquired from ten healthy subjects using generic earpieces fitted with three custom-made electrodes and a forehead electrode (at Fpx) after impedance analysis. Inter-subject variability in in-ear electrode impedance ranged from 20 kΩ to 25 kΩ at 10 Hz. Signal quality was comparable with an SNR of 6 for in-ear and 8 for forehead electrodes. Alpha attenuation was significant during the eyes-open condition in all in-ear electrodes, and it followed the structure of power spectral density plots of forehead electrodes, with the Pearson correlation coefficient of 0.92 between in-ear locations ELE (Left Ear Superior) and ERE (Right Ear Superior) and forehead locations, Fp1 and Fp2, respectively. The results indicate that in-ear EEG is an unobtrusive alternative in terms of impedance, signal properties and information content to established forehead EEG.},
  language  = {en}
}
@article{HagenkampBlankeDoering2021,
  author    = {Hagenkamp, Markus and Blanke, Tobias and D{\"o}ring, Bernd},
  title     = {Thermoelectric building temperature control: a potential assessment},
  series = {International Journal of Energy and Environmental Engineering},
  volume    = {13},
  journal   = {International Journal of Energy and Environmental Engineering},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/s40095-021-00424-x},
  pages     = {241 -- 254},
  year      = {2021},
  abstract  = {This study focuses on thermoelectric elements (TEE) as an alternative for room temperature control. TEE are semi-conductor devices that can provide heating and cooling via a heat pump effect without direct noise emissions and no refrigerant use. An efficiency evaluation of the optimal operating mode is carried out for different numbers of TEE, ambient temperatures, and heating loads. The influence of an additional heat recovery unit on system efficiency and an unevenly distributed heating demand are examined. The results show that TEE can provide heat at a coefficient of performance (COP) greater than one especially for small heating demands and high ambient temperatures. The efficiency increases with the number of elements in the system and is subject to economies of scale. The best COP exceeds six at optimal operating conditions. An additional heat recovery unit proves beneficial for low ambient temperatures and systems with few TEE. It makes COPs above one possible at ambient temperatures below 0 ∘C. The effect increases efficiency by maximal 0.81 (from 1.90 to 2.71) at ambient temperature 5 K below room temperature and heating demand Q˙h=100W but is subject to diseconomies of scale. Thermoelectric technology is a valuable option for electricity-based heat supply and can provide cooling and ventilation functions. A careful system design as well as an additional heat recovery unit significantly benefits the performance. This makes TEE superior to direct current heating systems and competitive to heat pumps for small scale applications with focus on avoiding noise and harmful refrigerants.},
  language  = {en}
}
@article{TopcuMadabhushiStaat2022,
  author    = {Top{\c{c}}u, Murat and Madabhushi, Gopal S.P. and Staat, Manfred},
  title     = {A generalized shear-lag theory for elastic stress transfer between matrix and fibres having a variable radius},
  series = {International Journal of Solids and Structures},
  volume    = {239-240},
  journal   = {International Journal of Solids and Structures},
  number    = {Art. No. 111464},
  publisher = {Elsevier},
  address   = {New York, NY},
  issn      = {0020-7683},
  doi       = {10.1016/j.ijsolstr.2022.111464},
  year      = {2022},
  abstract  = {A generalized shear-lag theory for fibres with variable radius is developed to analyse elastic fibre/matrix stress transfer. The theory accounts for the reinforcement of biological composites, such as soft tissue and bone tissue, as well as for the reinforcement of technical composite materials, such as fibre-reinforced polymers (FRP). The original shear-lag theory proposed by Cox in 1952 is generalized for fibres with variable radius and with symmetric and asymmetric ends. Analytical solutions are derived for the distribution of axial and interfacial shear stress in cylindrical and elliptical fibres, as well as conical and paraboloidal fibres with asymmetric ends. Additionally, the distribution of axial and interfacial shear stress for conical and paraboloidal fibres with symmetric ends are numerically predicted. The results are compared with solutions from axisymmetric finite element models. A parameter study is performed, to investigate the suitability of alternative fibre geometries for use in FRP.},
  language  = {en}
}
@article{EngemannCoenenDawaretal.2021,
  author    = {Engemann, Heiko and C{\"o}nen, Patrick and Dawar, Harshal and Du, Shengzhi and Kallweit, Stephan},
  title     = {A robot-assisted large-scale inspection of wind turbine blades in manufacturing using an autonomous mobile manipulator},
  series = {Applied Sciences},
  volume    = {11},
  journal   = {Applied Sciences},
  number    = {19},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3417},
  doi       = {10.3390/app11199271},
  pages     = {1 -- 22},
  year      = {2021},
  abstract  = {Wind energy represents the dominant share of renewable energies. The rotor blades of a wind turbine are typically made from composite material, which withstands high forces during rotation. The huge dimensions of the rotor blades complicate the inspection processes in manufacturing. The automation of inspection processes has a great potential to increase the overall productivity and to create a consistent reliable database for each individual rotor blade. The focus of this paper is set on the process of rotor blade inspection automation by utilizing an autonomous mobile manipulator. The main innovations include a novel path planning strategy for zone-based navigation, which enables an intuitive right-hand or left-hand driving behavior in a shared human-robot workspace. In addition, we introduce a new method for surface orthogonal motion planning in connection with large-scale structures. An overall execution strategy controls the navigation and manipulation processes of the long-running inspection task. The implemented concepts are evaluated in simulation and applied in a real-use case including the tip of a rotor blade form.},
  language  = {en}
}
@inproceedings{NikolovskiRekeElsenetal.2021,
  author    = {Nikolovski, Gjorgji and Reke, Michael and Elsen, Ingo and Schiffer, Stefan},
  title     = {Machine learning based 3D object detection for navigation in unstructured environments},
  series = {2021 IEEE Intelligent Vehicles Symposium Workshops (IV Workshops)},
  booktitle = {2021 IEEE Intelligent Vehicles Symposium Workshops (IV Workshops)},
  publisher = {IEEE},
  isbn      = {978-1-6654-7921-9},
  doi       = {10.1109/IVWorkshops54471.2021.9669218},
  pages     = {236 -- 242},
  year      = {2021},
  abstract  = {In this paper we investigate the use of deep neural networks for 3D object detection in uncommon, unstructured environments such as in an open-pit mine. While neural nets are frequently used for object detection in regular autonomous driving applications, more unusual driving scenarios aside street traffic pose additional challenges. For one, the collection of appropriate data sets to train the networks is an issue. For another, testing the performance of trained networks often requires tailored integration with the particular domain as well. While there exist different solutions for these problems in regular autonomous driving, there are only very few approaches that work for special domains just as well. We address both the challenges above in this work. First, we discuss two possible ways of acquiring data for training and evaluation. That is, we evaluate a semi-automated annotation of recorded LIDAR data and we examine synthetic data generation. Using these datasets we train and test different deep neural network for the task of object detection. Second, we propose a possible integration of a ROS2 detector module for an autonomous driving platform. Finally, we present the performance of three state-of-the-art deep neural networks in the domain of 3D object detection on a synthetic dataset and a smaller one containing a characteristic object from an open-pit mine.},
  language  = {en}
}
@inproceedings{HauggKreyerKemperetal.2020,
  author    = {Haugg, Albert Thomas and Kreyer, J{\"o}rg and Kemper, Hans and Hatesuer, Katerina and Esch, Thomas},
  title     = {Heat exchanger for ORC. adaptability and optimisation potentials},
  series = {IIR International Rankine 2020 Conference},
  booktitle = {IIR International Rankine 2020 Conference},
  doi       = {10.18462/iir.rankine.2020.1224},
  pages     = {10 Seiten},
  year      = {2020},
  abstract  = {The recovery of waste heat requires heat exchangers to extract it from a liquid or gaseous medium into another working medium, a refrigerant. In Organic Rankine Cycles (ORC) on Combustion Engines there are two major heat sources, the exhaust gas and the water/glycol fluid from the engine's cooling circuit. A heat exchanger design must be adapted to the different requirements and conditions resulting from the heat sources, fluids, system configurations, geometric restrictions, and etcetera. The Stacked Shell Cooler (SSC) is a new and very specific design of a plate heat exchanger, created by AKG, which allows with a maximum degree of freedom the optimization of heat exchange rate and the reduction of the related pressure drop. This optimization in heat exchanger design for ORC systems is even more important, because it reduces the energy consumption of the system and therefore maximizes the increase in overall efficiency of the engine.},
  language  = {en}
}
@inproceedings{SchaenzleAltherrEdereretal.2015,
  author    = {Sch{\"a}nzle, Christian and Altherr, Lena and Ederer, Thorsten and Pelz, Peter},
  title     = {TOR - Towards the energetically optimal ventilation system},
  pages     = {1 Seite},
  year      = {2015},
  language  = {en}
}
@inproceedings{LorenzAltherrPelz2020,
  author    = {Lorenz, Imke-Sophie and Altherr, Lena and Pelz, Peter F.},
  title     = {Resilience enhancement of critical infrastructure - graph-theoretical resilience analysis of the water distribution system in the German city of Darmstadt},
  series = {14th WCEAM Proceedings},
  booktitle = {14th WCEAM Proceedings},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-64228-0},
  doi       = {10.1007/978-3-030-64228-0_13},
  pages     = {137 -- 149},
  year      = {2020},
  abstract  = {Water suppliers are faced with the great challenge of achieving high-quality and, at the same time, low-cost water supply. Since climatic and demographic influences will pose further challenges in the future, the resilience enhancement of water distribution systems (WDS), i.e. the enhancement of their capability to withstand and recover from disturbances, has been in particular focus recently. To assess the resilience of WDS, graph-theoretical metrics have been proposed. In this study, a promising approach is first physically derived analytically and then applied to assess the resilience of the WDS for a district in a major German City. The topology based resilience index computed for every consumer node takes into consideration the resistance of the best supply path as well as alternative supply paths. This resistance of a supply path is derived to be the dimensionless pressure loss in the pipes making up the path. The conducted analysis of a present WDS provides insight into the process of actively influencing the resilience of WDS locally and globally by adding pipes. The study shows that especially pipes added close to the reservoirs and main branching points in the WDS result in a high resilience enhancement of the overall WDS.},
  language  = {en}
}
@incollection{LeiseAltherr2021,
  author    = {Leise, Philipp and Altherr, Lena},
  title     = {Experimental evaluation of resilience metrics in a fluid system},
  series = {Mastering Uncertainty in Mechanical Engineering},
  booktitle = {Mastering Uncertainty in Mechanical Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78356-3},
  pages     = {442 -- 447},
  year      = {2021},
  language  = {en}
}
@incollection{AltherrLeisePfetschetal.2021,
  author    = {Altherr, Lena and Leise, Philipp and Pfetsch, Marc E. and Schmitt, Andreas},
  title     = {Optimal design of resilient technical systems on the example of water supply systems},
  series = {Mastering Uncertainty in Mechanical Engineering},
  booktitle = {Mastering Uncertainty in Mechanical Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78356-3},
  pages     = {429 -- 433},
  year      = {2021},
  language  = {en}
}
@incollection{AltherrLeise2021,
  author    = {Altherr, Lena and Leise, Philipp},
  title     = {Resilience as a concept for mastering uncertainty},
  series = {Mastering Uncertainty in Mechanical Engineering},
  booktitle = {Mastering Uncertainty in Mechanical Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78353-2},
  doi       = {10.1007/978-3-030-78354-9},
  pages     = {412 -- 417},
  year      = {2021},
  language  = {en}
}
@incollection{Golland2020,
  author    = {Golland, Alexander},
  title     = {Struggling with users' consent: Economic approach to solve the issue of coupling},
  series = {Turning Point in Data Protection Law},
  booktitle = {Turning Point in Data Protection Law},
  publisher = {Nomos},
  address   = {Baden-Baden},
  isbn      = {978-3-8487-6909-4},
  doi       = {10.5771/9783748921561-121},
  pages     = {121 -- 126},
  year      = {2020},
  language  = {en}
}
@incollection{GollandOhrtmann2020,
  author    = {Golland, Alexander and Ohrtmann, Jan-Peter},
  title     = {Video surveillance: The supervisory authorities' view andrecent case law},
  series = {Turning Point in Data Protection Law},
  booktitle = {Turning Point in Data Protection Law},
  publisher = {Nomos},
  address   = {Baden-Baden},
  isbn      = {978-3-8487-6909-4},
  doi       = {10.5771/9783748921561-175},
  pages     = {175 -- 178},
  year      = {2020},
  language  = {en}
}