@inproceedings{KernBeierlZischank2009, author = {Kern, Alexander and Beierl, Ottmar and Zischank, Wolfgang}, title = {Calculation of the separation distance according to IEC 62305-3: 2006-10 - Remarks for the application and simplified methods}, year = {2009}, abstract = {[Paper of the X International Symposium on Lightning Protection 9th - 13th November, 2009 - Curitiba, Brazil. 6 pages] The international standard IEC 62305-3, published in 2006, requires as an integral part of the lightning protection system (LPS) the consideration of a separation distance between the conductors of the LPS and metal and electrical installations inside the structure to be protected. IEC 62305-3 gives two different methods for this calculation: a standard, simplified approach and a more detailed approach, which differ especially regarding the treatment of the current sharing effect on the LPS conductors. Hence, different results for the separation distance are possible, leading to some discrepancies in the use of the standard. The standard approach defined in the main part (Clause 6.3) and in Annex C of the standard in some cases may lead to a severe oversizing of the required separation distance. The detailed approach described in Annex E naturally gives more correct results. However, a calculation of the current sharing amongst all parts of the air-termination and downconductor network is necessary, in many cases requiring the use of network analysis programs. In this paper simplified methods for the assessment of the current sharing are presented, which are easy to use as well as sufficiently adequate.}, subject = {Blitzschutz}, language = {de} } @article{HelsperFissanKasper1984, author = {Helsper, Christoph and Fißan, H. J. and Kasper, W.}, title = {Calibration of Optical Particle Counters with Respect to Particle Size / Fißan, H. J. ; Helsper, C.; Kasper, W.}, series = {Particle and Particle Systems Characterization. 1 (1984), H. 1984}, journal = {Particle and Particle Systems Characterization. 1 (1984), H. 1984}, isbn = {1521-4117}, pages = {108 -- 111}, year = {1984}, language = {en} } @article{HelsperFissan1983, author = {Helsper, Christoph and Fißan, H. J.}, title = {Calibration of the Polytec HC-15 and HC-70 Optical Particle Counters / Fißan, H. J. ; Helsper, C.}, series = {Aerosols in the mining and industrial work environments, Vol. 3. Instrumentation, Marple, Virgil A. ; Liu, Benjamin Y.}, journal = {Aerosols in the mining and industrial work environments, Vol. 3. Instrumentation, Marple, Virgil A. ; Liu, Benjamin Y.}, publisher = {Ann Arbor Science}, address = {Ann Arbor, Mich.}, pages = {825 -- 829}, year = {1983}, language = {en} } @incollection{HinkeVervierBrauneretal.2022, author = {Hinke, Christian and Vervier, Luisa and Brauner, Philipp and Schneider, Sebastian and Steuer-Dankert, Linda and Ziefle, Martina and Leicht-Scholten, Carmen}, title = {Capability configuration in next generation manufacturing}, series = {Forecasting next generation manufacturing : digital shadows, human-machine collaboration, and data-driven business models}, booktitle = {Forecasting next generation manufacturing : digital shadows, human-machine collaboration, and data-driven business models}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-07733-3}, doi = {10.1007/978-3-031-07734-0_6}, pages = {95 -- 106}, year = {2022}, abstract = {Industrial production systems are facing radical change in multiple dimensions. This change is caused by technological developments and the digital transformation of production, as well as the call for political and social change to facilitate a transformation toward sustainability. These changes affect both the capabilities of production systems and companies and the design of higher education and educational programs. Given the high uncertainty in the likelihood of occurrence and the technical, economic, and societal impacts of these concepts, we conducted a technology foresight study, in the form of a real-time Delphi analysis, to derive reliable future scenarios featuring the next generation of manufacturing systems. This chapter presents the capabilities dimension and describes each projection in detail, offering current case study examples and discussing related research, as well as implications for policy makers and firms. Specifically, we discuss the benefits of capturing expert knowledge and making it accessible to newcomers, especially in highly specialized industries. The experts argue that in order to cope with the challenges and circumstances of today's world, students must already during their education at university learn how to work with AI and other technologies. This means that study programs must change and that universities must adapt their structural aspects to meet the needs of the students.}, language = {en} } @inproceedings{KalkerTollHolleretal.2004, author = {Kalker, Ines and Toll, B. and Holler, Stefan and Butenweg, Christoph and Topping, B. H. V. and Mota Soares, C. A.}, title = {Capacity analysis of textile retrofitted unreinforced masonry}, series = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...}, booktitle = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...}, publisher = {Civil-Comp Press}, address = {Stirling}, organization = {International Conference on Computational Structures Technology <7, 2004, Lissabon>}, isbn = {0-948749-95-4}, doi = {10.4203/ccp.79.194}, pages = {431 -- 432}, year = {2004}, language = {en} } @inproceedings{ButenwegGellertReindl2008, author = {Butenweg, Christoph and Gellert, Christoph and Reindl, Lukas}, title = {Capacity design of masonry buildings under cyclic loading}, series = {Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Li{\`e}ge on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...}, booktitle = {Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Li{\`e}ge on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...}, publisher = {Editions de l'Universit{\´e} de Li{\`e}ge}, address = {Li{\`e}ge}, organization = {Belgian Seismic Group}, isbn = {978-2-87456-063-7}, pages = {201 -- 208}, year = {2008}, language = {en} } @article{HoffstadtPohenDickeetal.2020, author = {Hoffstadt, Kevin and Pohen, Gino D. and Dicke, Max D. and Paulsen, Svea and Krafft, Simone and Zang, Joachim W. and Fonseca-Zang, Warde A. da and Leite, Athaydes and Kuperjans, Isabel}, title = {Challenges and prospects of biogas from energy cane as supplement to bioethanol production}, series = {Agronomy}, volume = {10}, journal = {Agronomy}, number = {6}, publisher = {MDPI}, address = {Basel}, issn = {2073-4395}, doi = {10.3390/agronomy10060821}, year = {2020}, abstract = {Innovative breeds of sugar cane yield up to 2.5 times as much organic matter as conventional breeds, resulting in a great potential for biogas production. The use of biogas production as a complementary solution to conventional and second-generation ethanol production in Brazil may increase the energy produced per hectare in the sugarcane sector. Herein, it was demonstrated that through ensiling, energy cane can be conserved for six months; the stored cane can then be fed into a continuous biogas process. This approach is necessary to achieve year-round biogas production at an industrial scale. Batch tests revealed specific biogas potentials between 400 and 600 LN/kgVS for both the ensiled and non-ensiled energy cane, and the specific biogas potential of a continuous biogas process fed with ensiled energy cane was in the same range. Peak biogas losses through ensiling of up to 27\% after six months were observed. Finally, compared with second-generation ethanol production using energy cane, the results indicated that biogas production from energy cane may lead to higher energy yields per hectare, with an average energy yield of up to 162 MWh/ha. Finally, the Farm²CBG concept is introduced, showing an approach for decentralized biogas production.}, language = {en} } @article{Thielemann1997, author = {Thielemann, Frank}, title = {Chancen durch Online-Dienste?}, series = {OP DruckMagazin. 39 (1997), H. 1-2}, journal = {OP DruckMagazin. 39 (1997), H. 1-2}, isbn = {0030-0594}, pages = {26 -- f.}, year = {1997}, language = {de} } @article{SchwarzerSilva2008, author = {Schwarzer, Klemens and Silva, Maria Eugenia Vieira da}, title = {Characterisation and design methods of solar cookers / Schwarzer, Klemens ; Silva, Maria Eugenia Vieira da}, series = {Solar energy. 82 (2008), H. 2}, journal = {Solar energy. 82 (2008), H. 2}, isbn = {0038-092X}, pages = {157 -- 163}, year = {2008}, language = {en} } @article{HelsperMoelter1991, author = {Helsper, Christoph and M{\"o}lter, W.}, title = {Characteristics of a Nebulizer with Cyclone Preseparator / M{\"o}lter, W. ; Helsper, C.}, series = {Aerosols, their generation, behaviour and applications. Annual Conference of the Aerosol Society / Aerosol Society (UK) ; 5.}, journal = {Aerosols, their generation, behaviour and applications. Annual Conference of the Aerosol Society / Aerosol Society (UK) ; 5.}, address = {Loughborough}, pages = {89 -- 94}, year = {1991}, language = {en} } @article{FoersterMorvicBetkoetal.1999, author = {F{\"o}rster, Arnold and Morvic, M. and Betko, J. and Novak, J.}, title = {Characterization of low-temperature GaAs by conductivity, Hall effect and magnetoresistance measurements. Morvic, M., Betko, J.; Novak, J.; F{\"o}rster, A.; Kordos, P.}, series = {2nd Symposium on Non-Stoichiometric III-V Compounds : [4th - 6th October 1999, Erlangen] / [ed. by T. Marek ...] Friedrich-Alexander-Universit{\"a}t Erlangen-N{\"u}rnberg}, journal = {2nd Symposium on Non-Stoichiometric III-V Compounds : [4th - 6th October 1999, Erlangen] / [ed. by T. Marek ...] Friedrich-Alexander-Universit{\"a}t Erlangen-N{\"u}rnberg}, publisher = {Lehrstuhl f{\"u}r Mikrocharakterisierung}, address = {Erlangen}, isbn = {3-932392-19-1}, pages = {79 -- 85}, year = {1999}, language = {en} } @article{FoersterNovakKuceraetal.1997, author = {F{\"o}rster, Arnold and Novak, J. and Kucera, M. and Morvic, M.}, title = {Characterization of low-temperature GaAs by galvanomagnetic an photoluminescence measurements / J. Nov{\´a}k ; M. Kucera ; M. Morvic ... A. F{\"o}rster ...}, series = {Materials science and engineering B: Solid\&\#150; state materials for advanced technology. 44 (1997), H. 1-3}, journal = {Materials science and engineering B: Solid\&\#150; state materials for advanced technology. 44 (1997), H. 1-3}, isbn = {0921-5107}, pages = {341 -- 344}, year = {1997}, language = {en} } @inproceedings{KasparGroebelKuperjansetal.2013, author = {Kaspar, K. and Groebel, Simone and Kuperjans, Isabel and Dielmann, Klaus-Peter and Selmer, Thorsten}, title = {Charakterisierung der Bioz{\"o}nose von Biogasfermentern in Abh{\"a}ngigkeit verschiedener Substrate}, series = {Biogas 2013 : 6. Innovationskongress, 23. - 24.05.2013, Osnabr{\"u}ck, Tagungsband}, booktitle = {Biogas 2013 : 6. Innovationskongress, 23. - 24.05.2013, Osnabr{\"u}ck, Tagungsband}, publisher = {Profair Consult+Project}, address = {Hildesheim}, issn = {978-3-9813776-3-7}, pages = {69 -- 74}, year = {2013}, language = {de} } @article{HelsperLuetkemeierWiedensohler1986, author = {Helsper, Christoph and L{\"u}tkemeier, E. and Wiedensohler, A.}, title = {Charge Distribution by Unipolar Charging of Small Aerosol Particles / L{\"u}tkemeier, E. ; Helsper, C. ; Wiedensohler, A.}, series = {Aerosols : formation and reactivity ; proceedings of the second International Aerosol Conference, 22-26 Sept. 1986, Berlin (West) / Gesellschaft f{\"u}r Aerosolforschung (GAeF) ; American Association for Aerosol Research (AAAR)}, journal = {Aerosols : formation and reactivity ; proceedings of the second International Aerosol Conference, 22-26 Sept. 1986, Berlin (West) / Gesellschaft f{\"u}r Aerosolforschung (GAeF) ; American Association for Aerosol Research (AAAR)}, publisher = {Pergamon Press}, address = {Oxford [u.a.]}, pages = {474 -- 478}, year = {1986}, language = {en} } @article{FoersterLachenmannFriedrich1997, author = {F{\"o}rster, Arnold and Lachenmann, S. G. and Friedrich, I.}, title = {Charge transport in superconductor/semiconductor/normal-conductor step junctions / S. G. Lachenmann ; I. Friedrich ; A. F{\"o}rster ...}, series = {Physical review / B, Condensed matter and materials physics. 56 (1997), H. 21}, journal = {Physical review / B, Condensed matter and materials physics. 56 (1997), H. 21}, isbn = {1095-3795}, pages = {14108 -- 14115}, year = {1997}, language = {en} } @inproceedings{HoeflerKneerGrossetal.2015, author = {H{\"o}fler, M. and Kneer, R. and Groß, Rolf Fritz and Kehrmann, K.}, title = {Chemical determination of oxygen transfer rates, transfer efficiencies and interphases evoked by aeration elements for liquid flows}, series = {Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ; Volume 89)}, booktitle = {Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ; Volume 89)}, editor = {Vorobieff, P.}, publisher = {WIT Press}, address = {Southampton}, isbn = {978-1-84564-946-3 (Print-Ausgabe)}, issn = {1746-4471}, pages = {89 -- 101}, year = {2015}, language = {en} } @misc{PierHummenStellberg1996, author = {Pier, Arnold and Hummen, J{\"o}rg and Stellberg, Michael}, title = {Chirurgischer Klammerapplikator}, pages = {4 Bl., 7 S. : graph. Darst.}, year = {1996}, language = {de} } @article{SommerGerlingPredel1984, author = {Sommer, F. and Gerling, Ulrich and Predel, Bruno}, title = {Comments on 'On the evaluation of interchange energies and the equilibrium constant from mixing enthalpies of a regular associated solution' by S. Lele, G.V.S. Sastry, and P. Ramachandrarao = Kommentar zu 'Zur Berechnung der Wechselwirkungsenergien und der Gleichgewichtskonstanten aus Mischungsenthalpien in regul{\"a}ren assoziierten L{\"o}sungen' von S. Lele, G.V.S. Sastry und P. Ramachandrarao}, series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 75, H. 6}, journal = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 75, H. 6}, issn = {0044-3093 ; 0179-4841}, pages = {449 -- 454}, year = {1984}, language = {en} } @article{HoffschmidtFendJorgensenetal.2003, author = {Hoffschmidt, Bernhard and Fend, Thomas and Jorgensen, Gary and K{\"u}ster, Harald}, title = {Comparative assessment of solar concentrator materials / Fend, Thomas ; Hoffschmidt, Bernhard ; Jorgensen, Gary ; K{\"u}ster, Harald ; Kr{\"u}ger, Dirk ; Pitz-Paal, Robert ; Riebrock, Peter ; Riffelmann, Klaus-J{\"u}rgen}, series = {Solar energy. 74 (2003), H. 2}, journal = {Solar energy. 74 (2003), H. 2}, isbn = {0038-092X}, pages = {149 -- 155}, year = {2003}, language = {en} } @article{HoffschmidtFendJorgensen2002, author = {Hoffschmidt, Bernhard and Fend, Thomas and Jorgensen, Gary}, title = {Comparative assessment of solar concentrator materials / Thomas Fend ; Bernhard Hoffschmidt ; Gary Jorgensen ...}, series = {Renewable energy for local communities of Europe : (toward Rio+10) ; proceedings / EuroSun 2002, the 4th ISES Europe Solar Congress ; Bologna (Italy), 23 - 26 June 2002 / ISES Italia}, journal = {Renewable energy for local communities of Europe : (toward Rio+10) ; proceedings / EuroSun 2002, the 4th ISES Europe Solar Congress ; Bologna (Italy), 23 - 26 June 2002 / ISES Italia}, address = {Bologna}, isbn = {88-900893-0-X}, pages = {paper_125.pdf}, year = {2002}, language = {en} }