@article{FoersterVitusevichBelyaev1999,
  author    = {F{\"o}rster, Arnold and Vitusevich, S. A. and Belyaev, B. A.},
  title     = {Intrinsic bistability effect in delta doped tunneling diodes / S. A. Vitusevich ; A. F{\"o}rster ; B. A. Belyaev ...},
  series = {Proceedings of the XXVIII International School on Physics of Semiconducting Compounds : Jaszowiec, Poland, June 6 - 11, 1999 / Polish Academy of Sciences, Institute of Physics. Ed. of the proceedings Wojciech Szuszkiewicz},
  journal   = {Proceedings of the XXVIII International School on Physics of Semiconducting Compounds : Jaszowiec, Poland, June 6 - 11, 1999 / Polish Academy of Sciences, Institute of Physics. Ed. of the proceedings Wojciech Szuszkiewicz},
  address   = {Warsaw},
  pages     = {S. 511 - 688 : Ill., graph. Darst.},
  year      = {1999},
  language  = {en}
}
@inproceedings{NiederwestbergSchneiderTeixeiraBouraetal.2022,
  author    = {Niederwestberg, Stefan and Schneider, Falko and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Introduction to a direct irradiated transparent tube particle receiver},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086735},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {New materials often lead to innovations and advantages in technical applications. This also applies to the particle receiver proposed in this work that deploys high-temperature and scratch resistant transparent ceramics. With this receiver design, particles are heated through direct-contact concentrated solar irradiance while flowing downwards through tubular transparent ceramics from top to bottom. In this paper, the developed particle receiver as well as advantages and disadvantages are described. Investigations on the particle heat-up characteristics from solar irradiance were carried out with DEM simulations which indicate that particle temperatures can reach up to 1200 K. Additionally, a simulation model was set up for investigating the dynamic behavior. A test receiver at laboratory scale has been designed and is currently being built. In upcoming tests, the receiver test rig will be used to validate the simulation results. The design and the measurement equipment is described in this work.},
  language  = {en}
}
@inproceedings{RigaPitilakisButenwegetal.2022,
  author    = {Riga, Evi and Pitilakis, Kyriazis and Butenweg, Christoph and Apostolaki, Stefania and Karatzetzou, Anna},
  title     = {Investigating the impact of the new European Seismic Hazard Model ESHM20 on the seismic design and safety control of industrial facilities},
  series = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  booktitle = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  editor    = {Arion, Cristian and Scupin, Alexandra and Ţigănescu, Alexandru},
  isbn      = {978-973-100-533-1},
  pages     = {3261 -- 3270},
  year      = {2022},
  abstract  = {The seismic performance and safety of major European industrial facilities has a global interest for Europe, its citizens and economy. A potential major disaster at an industrial site could affect several countries, probably far beyond the country where it is located. However, the seismic design and safety assessment of these facilities is practically based on national, often outdated seismic hazard assessment studies, due to many reasons, including the absence of a reliable, commonly developed seismic hazard model for whole Europe. This important gap is no more existing, as the 2020 European Seismic Hazard Model ESHM20 was released in December 2021. In this paper we investigate the expected impact of the adoption of ESHM20 on the seismic demand for industrial facilities, through the comparison of the ESHM20 probabilistic hazard at the sites where industrial facilities are located with the respective national and European regulations. The goal of this preliminary work in the framework of Working Group 13 of the European Association for Earthquake Engineering (EAEE), is to identify potential inadequacies in the design and safety control of existing industrial facilities and to highlight the expected impact of the adoption of the new European Seismic Hazard Model on the design of new industrial facilities and the safety assessment of existing ones.},
  language  = {en}
}
@article{BaumgartnerFidlerWethetal.2008,
  author    = {Baumgartner, Werner and Fidler, Florian and Weth, Agnes and Habbecke, Martin and Jakob, Peter and Butenweg, Christoph and B{\"o}hme, Wolfgang},
  title     = {Investigating the locomotion of the sandfish in desert sand using NMR-Imaging},
  series = {PLOS ONE},
  volume    = {3},
  journal   = {PLOS ONE},
  number    = {10},
  publisher = {Plos},
  address   = {San Francisco, California, US},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0003309},
  pages     = {e3309},
  year      = {2008},
  abstract  = {The sandfish (Scincus scincus) is a lizard having the remarkable ability to move through desert sand for significant distances. It is well adapted to living in loose sand by virtue of a combination of morphological and behavioural specializations. We investigated the bodyform of the sandfish using 3D-laserscanning and explored its locomotion in loose desert sand using fast nuclear magnetic resonance (NMR) imaging. The sandfish exhibits an in-plane meandering motion with a frequency of about 3 Hz and an amplitude of about half its body length accompanied by swimming-like (or trotting) movements of its limbs. No torsion of the body was observed, a movement required for a digging-behaviour. Simple calculations based on the Janssen model for granular material related to our findings on bodyform and locomotor behaviour render a local decompaction of the sand surrounding the moving sandfish very likely. Thus the sand locally behaves as a viscous fluid and not as a solid material. In this fluidised sand the sandfish is able to "swim" using its limbs.},
  language  = {en}
}
@article{FoersterDubeckyDarmo1994,
  author    = {F{\"o}rster, Arnold and Dubecky, F.. and Darmo, J.},
  title     = {Investigation of deep-level states in bulk and low temperature MBE semiinsulating GaAs by admittance transient spectroscopy / F. Dubecky ; J. Darmo ; M. Darviras ; A. F{\"o}rster ...},
  series = {Semi-insulating III-V materials, Ixtapa, Mexico 1992 : proceedings of the 7th Conference on Semi-insulating III-V Materials, Ixtapa, Mexico, 21 - 24 April 1992 / ed. by C. J. Miner ...},
  journal   = {Semi-insulating III-V materials, Ixtapa, Mexico 1992 : proceedings of the 7th Conference on Semi-insulating III-V Materials, Ixtapa, Mexico, 21 - 24 April 1992 / ed. by C. J. Miner ...},
  publisher = {Inst. of Physics Publ.},
  address   = {Bristol [u.a.]},
  isbn      = {0-7503-0242-9},
  pages     = {265 -- 272},
  year      = {1994},
  language  = {en}
}
@article{SchwarzerSchlenger1988,
  author    = {Schwarzer, Klemens and Schlenger, Barbara J.},
  title     = {Investigation of fission product aerosol behavior in an HTR containment during severe core-heatup accidents / Barbara J. Schlenger ; K. Schwarzer},
  series = {Tagungsbericht : Maritim Kongresszentrum, 17. - 19. Mai '88 Travem{\"u}nde / Kerntechnische Gesellschaft e.V.; Deutsches Atomforum e.V. [Red.: K. G. Bauer]},
  journal   = {Tagungsbericht : Maritim Kongresszentrum, 17. - 19. Mai '88 Travem{\"u}nde / Kerntechnische Gesellschaft e.V.; Deutsches Atomforum e.V. [Red.: K. G. Bauer]},
  publisher = {Inforum},
  address   = {Bonn},
  isbn      = {0720-9207},
  pages     = {179 -- 182},
  year      = {1988},
  language  = {en}
}
@article{FoersterLueth1987,
  author    = {F{\"o}rster, Arnold and L{\"u}th, H.},
  title     = {Investigation of the InSb(110)-Sn schottky barrier by means of electron energy loss spectroscopy},
  series = {Surface Science. 189-190 (1987)},
  journal   = {Surface Science. 189-190 (1987)},
  isbn      = {0039-6028},
  pages     = {307 -- 314},
  year      = {1987},
  language  = {en}
}
@inproceedings{KubalskiButenwegMarinkovićetal.2017,
  author    = {Kubalski, T. and Butenweg, Christoph and Marinković, Marko and Klinkel, S.},
  title     = {Investigation Of The Seismic Behaviour Of Infill Masonry Using Numerical Modelling Approaches},
  series = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  pages     = {1 -- 11},
  year      = {2017},
  abstract  = {Masonry is a widely spread construction type which is used all over the world for different types of structures. Due to its simple and cheap construction, it is used as non-structural as well as structural element. In frame structures, such as reinforced concrete frames, masonry may be used as infill. While the bare frame itself is able to carry the loads when it comes to seismic events, the infilled frame is not able to warp freely due to the constrained movement. This restraint results in a complex interaction between the infill and the surrounding frame, which may lead to severe damage to the infill as well as the surrounding frame. The interaction is studied in different projects and effective approaches for the description of the behavior are still lacking. Experimental programs are usually quite expensive, while numerical models, once validated, do offer an efficient approach for the investigation of the interaction when horizontally loaded. In order to study the numerous parameters influencing the seismic load bearing behavior, numerical models may be used. Therefore, this contribution presents a numerical approach for the simulation of infill masonry in reinforced concrete frames. Both parts, the surrounding frame as well as the infill are represented by micro modelling approaches to correctly take into account the different types of failure. The adopted numerical model describes the inelastic behavior of the system, as indicated by the obtained results of the overall structural response as well as the formation of damage in the infilled wall. Comparison of the numerical and experimental results highlights the valuable contribution of numerical simulations in the study and design of infilled frames. As damage of the infill masonry may occur in-plane due to the interaction as well as out-of-plane due to the low vertical load, both directions of loading are investigated.},
  language  = {en}
}
@inproceedings{MarkinkovicButenwegPaveseetal.2020,
  author    = {Markinkovic, Marko and Butenweg, Christoph and Pavese, A. and Lanese, I. and Hoffmeister, B. and Pinkawa, M. and Vulcu, C. and Bursi, O. and Nardin, C. and Paolacci, F. and Quinci, G. and Fragiadakis, M. and Weber, F. and Huber, P. and Renault, P. and G{\"u}ndel, M. and Dyke, S. and Ciucci, M. and Marino, A.},
  title     = {Investigation of the seismic behaviour of structural and nonstructural components in industrial facilities by means of shaking table tests},
  series = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  booktitle = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  isbn      = {978-3-86359-729-0},
  pages     = {159 -- 172},
  year      = {2020},
  language  = {en}
}
@article{RosinButenwegCacciatoreetal.2018,
  author    = {Rosin, Julia and Butenweg, Christoph and Cacciatore, Pamela and Boesen, Niklas},
  title     = {Investigation of the seismic performance of modern masonry buildings during the Emilia Romagna earthquake series},
  series = {Mauerwerk},
  volume    = {22},
  journal   = {Mauerwerk},
  number    = {4},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1022},
  doi       = {10.1002/dama.201800013},
  pages     = {238 -- 250},
  year      = {2018},
  abstract  = {The article presents the investigation of the seismic behaviour of a modern URM building located in the municipality of Finale Emilia in province of Modena, Northern Italy. The building is situated in the centre of the series of the 2012 Northern Italy earthquakes and has not suffered any damage during the earthquake series in 2012. The observed earthquake resistance of the building is compared with predicted resistances based on linear and nonlinear design approaches according to Eurocode. Furthermore, probabilistic analyses based on nonlinear calculation models taking into account scattering of the most relevant input parameters are carried out to identify their influence to the results and to derive fragility curves.},
  language  = {en}
}
@article{HelsperWiedensohlerLuetkemeieretal.1986,
  author    = {Helsper, Christoph and Wiedensohler, A. and L{\"u}tkemeier, E. and Feldpausch, M.},
  title     = {Investigation on the Bipolar Charge Distribution at Various Gas Conditions / Wiedensohler, A.; L{\"u}tkemeier, E.; Feldpausch, M. ; Helsper, C.},
  series = {Journal of Aerosol Science. 17 (1986), H. 3},
  journal   = {Journal of Aerosol Science. 17 (1986), H. 3},
  isbn      = {0021-8502},
  pages     = {413 -- 416},
  year      = {1986},
  language  = {en}
}
@article{HelsperMoelterLoeffleretal.1993,
  author    = {Helsper, Christoph and M{\"o}lter, W. and L{\"o}ffler, F. and Wadenpohl, C.},
  title     = {Investigations on a New Aerosol Generator for the Production of Carbon Aggregate Particles / Helsper, C. ; M{\"o}lter, W. ; L{\"o}ffler, F. ; Wadenpohl, C. ; Kaufmann, S. ; Wenninger, G.},
  series = {Atmospheric Environment. Part A. General Topics. 27 A (1993), H. 8},
  journal   = {Atmospheric Environment. Part A. General Topics. 27 A (1993), H. 8},
  isbn      = {1352-2310},
  pages     = {1271 -- 1275},
  year      = {1993},
  language  = {en}
}
@article{ButenwegMarinkovicPhlippetal.2022,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Phlipp, Michel and Lins, Robin and Renaut, Philipp},
  title     = {Isolierung und BIM-basiertes Bauwerksmonitoring des neuen Geb{\"a}udekomplexes f{\"u}r das BioSense-Institut in Novi Sad, Serbien},
  series = {Bauingenieur},
  volume    = {97},
  journal   = {Bauingenieur},
  number    = {6},
  editor    = {Haghsheno, Shervin},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867},
  doi       = {10.37544/0005-6650-2022-06-28},
  pages     = {S3 -- S5},
  year      = {2022},
  abstract  = {Im Norden von Serbien erfolgt in Novi Sad der Neubau eines modernen Forschungsgeb{\"a}udes f{\"u}r das BioSense-Institut mit finanzieller Unterst{\"u}tzung durch die Eu-rop{\"a}ische Union. Der Geb{\"a}udeteil mit Laboren wird zum Schutz und zur Sicherstellung des reibungslosen Betriebs der sensiblen und kapitalintensiven technischen Einbauten mit ei-ner Erdbebenisolierung mit integrierter K{\"o}rperschallisolation versehen. Zus{\"a}tzlich wird der entkoppelte Laborteil des For-schungsgeb{\"a}udes mit einem BIM-basierten Bauwerksmonito-ring versehen, um {\"A}nderungen des Geb{\"a}udezustands jederzeit abfragen und beurteilen zu k{\"o}nnen.},
  language  = {de}
}
@article{MeskourisButenwegGellert2009,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Gellert, Christoph},
  title     = {Iterativ verbessert : die RWTH Aachen entwickelt eine Software f{\"u}r einfache Nachweise von Mauerwerksbauten in Erdbebengebieten},
  series = {Deutsches Ingenieur-Blatt : Ingenieurwesen, Bautechnik, Umweltschutz ; Organ der deutschen Ingenieurkammern / Hrsg.: Bundes-Ingenieurkammer e.V.},
  journal   = {Deutsches Ingenieur-Blatt : Ingenieurwesen, Bautechnik, Umweltschutz ; Organ der deutschen Ingenieurkammern / Hrsg.: Bundes-Ingenieurkammer e.V.},
  number    = {Heft 5},
  publisher = {Rauh Medien GmbH},
  address   = {Wandlitz},
  issn      = {2365-192X},
  pages     = {31 -- 36},
  year      = {2009},
  language  = {de}
}
@article{Hoffschmidt2008,
  author    = {Hoffschmidt, Bernhard},
  title     = {Jenseits von Spanien. Das Solarthermische Versuchs- und Demonstrationskraftwerk J{\"u}lich (STJ)},
  series = {DLR-Nachrichten (2008)},
  journal   = {DLR-Nachrichten (2008)},
  isbn      = {0937-0420},
  pages     = {38 -- 39},
  year      = {2008},
  language  = {de}
}
@book{ThielemannStaudtKriegesmann1994,
  author    = {Thielemann, Frank and Staudt, Erich and Kriegesmann, Bernd},
  title     = {Joint-ventures. Staudt, Erich; Kriegesmann, Bernd; Thielemann, Frank},
  publisher = {Inst. f{\"u}r Angewandte Innovationsforschung e.V.},
  address   = {Bochum},
  pages     = {29 S. : graph. Darst.},
  year      = {1994},
  language  = {en}
}
@article{HelsperFissanKasper1984,
  author    = {Helsper, Christoph and Fißan, H. J. and Kasper, W.},
  title     = {Kalibrierung der Partikelgr{\"o}ßenbestimmung von optischen Partikelz{\"a}hlern / Fißan, H. J.; Helsper, C. ; Kasper, W.},
  series = {3. Europ{\"a}isches Symposion Partikelmeßtechnik : [PARTEC, eine Veranstaltung der Reihe Partikel-Technologie N{\"u}rnberg ; N{\"u}rnberg, 9. - 11. Mai 1984 ; preprints] = 3. European Symposium on Particle Characterization / Veranst.: GVC, Gesellschaft Verfahrenstechnik und Chemieingenieurwesen im Verein Deutscher Ingenieure (VDI). Red. Bearb.: Kurt Leschonski},
  journal   = {3. Europ{\"a}isches Symposion Partikelmeßtechnik : [PARTEC, eine Veranstaltung der Reihe Partikel-Technologie N{\"u}rnberg ; N{\"u}rnberg, 9. - 11. Mai 1984 ; preprints] = 3. European Symposium on Particle Characterization / Veranst.: GVC, Gesellschaft Verfahrenstechnik und Chemieingenieurwesen im Verein Deutscher Ingenieure (VDI). Red. Bearb.: Kurt Leschonski},
  publisher = {NMA N{\"u}rnberger Messe- und Ausstellungsges.},
  address   = {N{\"u}rnberg},
  pages     = {263 -- 274},
  year      = {1984},
  language  = {de}
}
@article{BreitbachMohrKroeger1983,
  author    = {Breitbach, Gerd and Mohr, H.-G. and Kroeger, W.},
  title     = {Kann der Aufwand f{\"u}r qualit{\"a}tssichernde Maßnahmen bei 'kleinen Reaktoren' gering gehalten werden? / H.-G. Mohr ; W. Kroeger ; G. Breitbach},
  series = {Kerntechnik '83 : Jahrestagung Kerntechnik , Berlin, 14.-16. Juni 1983. Tagungsbericht / Hrsg.: Kerntechnische Gesellschaft e.V. und Deutsches Atomforum e.V.},
  journal   = {Kerntechnik '83 : Jahrestagung Kerntechnik , Berlin, 14.-16. Juni 1983. Tagungsbericht / Hrsg.: Kerntechnische Gesellschaft e.V. und Deutsches Atomforum e.V.},
  publisher = {Deutsches Atomforum},
  address   = {Bonn},
  isbn      = {0173-0924},
  pages     = {199 -- 202},
  year      = {1983},
  language  = {de}
}
@article{Mohnke1985,
  author    = {Mohnke, Andreas},
  title     = {Kathodenzerst{\"a}ubung von Zinkoxid f{\"u}r die Akustoelektronik},
  series = {Universit{\"a}t <Halle, Saale>: Wissenschaftliche Beitr{\"a}ge : WB (1985)},
  journal   = {Universit{\"a}t <Halle, Saale>: Wissenschaftliche Beitr{\"a}ge : WB (1985)},
  isbn      = {0440-1298},
  pages     = {94 -- 95},
  year      = {1985},
  language  = {de}
}
@article{Hoffschmidt2000,
  author    = {Hoffschmidt, Bernhard},
  title     = {Keramische Mischer : {\"U}berhitzung ausgeschlossen},
  series = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2000)},
  journal   = {Nachrichten : Magazin des Deutschen Zentrums f{\"u}r Luft- und Raumfahrt / DLR (2000)},
  isbn      = {0937-0420},
  pages     = {26 -- 27},
  year      = {2000},
  language  = {de}
}