@masterthesis{Weisbecker2023,
  type      = {Bachelor Thesis},
  author    = {Weisbecker, Helen},
  title     = {550 nm : Farbwechsel von Tieren - Kommunikation in der Natur},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {116 Seiten},
  year      = {2023},
  abstract  = {„550 nm" befasst sich mit dem physiologischen Farbwechsel von Tieren. Einige Fische, Amphibien und Reptilien - wie beispielsweise das Cham{\"a}leon oder der Tintenfisch - k{\"o}nnen ihre K{\"o}rperfarbe schnell wechseln. Unsere Natur leidet unter Kriegen und dem Klimawandel und verliert dadurch ihre Sch{\"o}nheit. Diese zeichnet sich vor allem durch die beachtliche Diversit{\"a}t der K{\"o}rperf{\"a}rbung von Tieren aus. Die Funktionen erstrecken sich {\"u}ber Tarnung, Auflauern oder Warnung bis hin zu einer Werbef{\"a}rbung. Nicht nur Tiere nutzen Farbe als Ausdrucks- und Kommunikationsmittel. Auch Designer*innen bedienen sich an Farben, um Stimmungen zu vermitteln oder um Aufmerksamkeit und Individualit{\"a}t zu generieren. In „550 nm" wird das Ph{\"a}nomen des Farbwechsels durch Illustrationen visualisiert und soll als Inspiration f{\"u}r Designinnovationen dienen.},
  language  = {de}
}
@inproceedings{DuongJungFrotscheretal.2016,
  author    = {Duong, Minh Tuan and Jung, Alexander and Frotscher, Ralf and Staat, Manfred},
  title     = {A 3D electromechanical FEM-based model for cardiac tissue},
  series = {ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece, 5-10 June 2016},
  booktitle = {ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece, 5-10 June 2016},
  editor    = {Papadrakakis, M.},
  pages     = {13 S.},
  year      = {2016},
  language  = {en}
}
@inproceedings{BhattaraiFrotscherSoraetal.2014,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Sora, M.-C. and Staat, Manfred},
  title     = {A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{RabnerShacham2006,
  author    = {Rabner, Arthur and Shacham, Yosi},
  title     = {A concept for a sensitive micro total analysis system for high throughput fluorescence imaging},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1456},
  year      = {2006},
  abstract  = {This paper discusses possible methods for on-chip fluorescent imaging for integrated bio-sensors. The integration of optical and electro-optical accessories, according to suggested methods, can improve the performance of fluorescence imaging. It can boost the signal to background ratio by a few orders of magnitudes in comparison to conventional discrete setups. The methods that are present in this paper are oriented towards building reproducible arrays for high-throughput micro total analysis systems (µTAS). The first method relates to side illumination of the fluorescent material placed into microcompartments of the lab-on-chip. Its significance is in high utilization of excitation energy for low concentration of fluorescent material. The utilization of a transparent µLED chip, for the second method, allows the placement of the excitation light sources on the same optical axis with emission detector, such that the excitation and emission rays are directed controversly. The third method presents a spatial filtering of the excitation background.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{DigelDachwaldArtmannetal.2009,
  author    = {Digel, Ilya and Dachwald, Bernd and Artmann, Gerhard and Linder, Peter and Funke, O.},
  title     = {A concept of a probe for particle analysis and life detection in icy environments},
  year      = {2009},
  abstract  = {A melting probe equipped with autofluorescence-based detection system combined with a light scattering unit, and, optionally, with a microarray chip would be ideally suited to probe icy environments like Europa's ice layer as well as the polar ice layers of Earth and Mars for recent and extinct live.},
  subject      = {Sonde},
  language  = {en}
}
@article{LuftBremenLuft2023,
  author    = {Luft, Angela and Bremen, Sebastian and Luft, Nils},
  title     = {A cost/benefit and flexibility evaluation framework for additive technologies in strategic factory planning},
  series = {Processes},
  volume    = {11},
  journal   = {Processes},
  number    = {7},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9717},
  doi       = {10.3390/pr11071968},
  pages     = {Artikel 1968},
  year      = {2023},
  abstract  = {There is a growing demand for more flexibility in manufacturing to counter the volatility and unpredictability of the markets and provide more individualization for customers. However, the design and implementation of flexibility within manufacturing systems are costly and only economically viable if applicable to actual demand fluctuations. To this end, companies are considering additive manufacturing (AM) to make production more flexible. This paper develops a conceptual model for the impact quantification of AM on volume and mix flexibility within production systems in the early stages of the factory-planning process. Together with the model, an application guideline is presented to help planners with the flexibility quantification and the factory design process. Following the development of the model and guideline, a case study is presented to indicate the potential impact additive technologies can have on manufacturing flexibility Within the case study, various scenarios with different production system configurations and production programs are analyzed, and the impact of the additive technologies on volume and mix flexibility is calculated. This work will allow factory planners to determine the potential impacts of AM on manufacturing flexibility in an early planning stage and design their production systems accordingly.},
  language  = {en}
}
@article{SildatkeKarwanniKraftetal.2023,
  author    = {Sildatke, Michael and Karwanni, Hendrik and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {A distributed microservice architecture pattern for the automated generation of information extraction pipelines},
  series = {SN Computer Science},
  journal   = {SN Computer Science},
  number    = {4, Article number: 833},
  publisher = {Springer Singapore},
  address   = {Singapore},
  issn      = {2661-8907},
  doi       = {10.1007/s42979-023-02256-4},
  pages     = {19 Seiten},
  year      = {2023},
  abstract  = {Companies often build their businesses based on product information and therefore try to automate the process of information extraction (IE). Since the information source is usually heterogeneous and non-standardized, classic extract, transform, load techniques reach their limits. Hence, companies must implement the newest findings from research to tackle the challenges of process automation. They require a flexible and robust system that is extendable and ensures the optimal processing of the different document types. This paper provides a distributed microservice architecture pattern that enables the automated generation of IE pipelines. Since their optimal design is individual for each input document, the system ensures the ad-hoc generation of pipelines depending on specific document characteristics at runtime. Furthermore, it introduces the automated quality determination of each available pipeline and controls the integration of new microservices based on their impact on the business value. The introduced system enables fast prototyping of the newest approaches from research and supports companies in automating their IE processes. Based on the automated quality determination, it ensures that the generated pipelines always meet defined business requirements when they come into productive use.},
  language  = {en}
}
@inproceedings{DuongStaat2014,
  author    = {Duong, Minh Tuan and Staat, Manfred},
  title     = {A face-based smoothed finite element method for hyperelastic models and tissue growth},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{BagheriSchleupenDahmannetal.2015,
  author    = {Bagheri, Mohsen and Schleupen, Josef and Dahmann, Peter and Kallweit, Stephan},
  title     = {A multi-functional device applying for the safe maintenance at high-altitude on wind turbines},
  series = {20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015},
  booktitle = {20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015},
  organization    = {International Conference on Composite Materials <20, 2015, Copenhagen>},
  pages     = {1 -- 6},
  year      = {2015},
  language  = {en}
}
@inproceedings{TranStaatStavroulakis2014,
  author    = {Tran, Ngoc Trinh and Staat, Manfred and Stavroulakis, G. E.},
  title     = {A multicriteria method for truss optimization},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{UibelBlass2010,
  author    = {Uibel, Thomas and Blaß, Hans Joachim},
  title     = {A new method to determine suitable spacings and distances for self-tapping screws},
  series = {Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures},
  volume    = {43},
  booktitle = {Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures},
  publisher = {Lehrstuhl f{\"u}r Ingenieurholzbau und Baukonstruktionen},
  address   = {Karlsruhe},
  issn      = {1864-1784},
  year      = {2010},
  abstract  = {The determination of spacing, edge and end distance requirements for self-tapping screws requires numerous and comprehensive insertion tests. Yet the results of such tests cannot be transferred to other types of screws or even to screws of different diameter because of differences in shape or geometry. To reduce the effort of insertion tests a new method was developed which allows the estimation of required spacings, distances and timber thickness.},
  language  = {en}
}
@article{PfaffEnningSutter2022,
  author    = {Pfaff, Raphael and Enning, Manfred and Sutter, Stefan},
  title     = {A risk‑based approach to automatic brake tests for rail freight service: incident analysis and realisation concept},
  series = {SN Applied Sciences},
  volume    = {4},
  journal   = {SN Applied Sciences},
  number    = {4},
  publisher = {Springer},
  address   = {Cham},
  issn      = {2523-3971},
  doi       = {10.1007/s42452-022-05007-x},
  pages     = {1 -- 14},
  year      = {2022},
  abstract  = {This study reviews the practice of brake tests in freight railways, which is time consuming and not suitable to detect certain failure types. Public incident reports are analysed to derive a reasonable brake test hardware and communication architecture, which aims to provide automatic brake tests at lower cost than current solutions. The proposed solutions relies exclusively on brake pipe and brake cylinder pressure sensors, a brake release position switch as well as radio communication via standard protocols. The approach is embedded in the Wagon 4.0 concept, which is a holistic approach to a smart freight wagon. The reduction of manual processes yields a strong incentive due to high savings in manual labour and increased productivity.},
  language  = {en}
}
@article{EngemannCoenenDawaretal.2021,
  author    = {Engemann, Heiko and C{\"o}nen, Patrick and Dawar, Harshal and Du, Shengzhi and Kallweit, Stephan},
  title     = {A robot-assisted large-scale inspection of wind turbine blades in manufacturing using an autonomous mobile manipulator},
  series = {Applied Sciences},
  volume    = {11},
  journal   = {Applied Sciences},
  number    = {19},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3417},
  doi       = {10.3390/app11199271},
  pages     = {1 -- 22},
  year      = {2021},
  abstract  = {Wind energy represents the dominant share of renewable energies. The rotor blades of a wind turbine are typically made from composite material, which withstands high forces during rotation. The huge dimensions of the rotor blades complicate the inspection processes in manufacturing. The automation of inspection processes has a great potential to increase the overall productivity and to create a consistent reliable database for each individual rotor blade. The focus of this paper is set on the process of rotor blade inspection automation by utilizing an autonomous mobile manipulator. The main innovations include a novel path planning strategy for zone-based navigation, which enables an intuitive right-hand or left-hand driving behavior in a shared human-robot workspace. In addition, we introduce a new method for surface orthogonal motion planning in connection with large-scale structures. An overall execution strategy controls the navigation and manipulation processes of the long-running inspection task. The implemented concepts are evaluated in simulation and applied in a real-use case including the tip of a rotor blade form.},
  language  = {en}
}
@article{MonakhovaDiehl2021,
  author    = {Monakhova, Yulia and Diehl, Bernd W. K.},
  title     = {A step towards optimization of the qNMR workflow: proficiency testing exercise at an GxP-accredited laboratory},
  series = {Applied Magnetic Resonance},
  volume    = {52},
  journal   = {Applied Magnetic Resonance},
  publisher = {Springer Nature},
  address   = {Wien},
  issn      = {1613-7507},
  doi       = {10.1007/s00723-021-01324-3},
  pages     = {581 -- 593},
  year      = {2021},
  abstract  = {Quantitative nuclear magnetic resonance (qNMR) is considered as a powerful tool for multicomponent mixture analysis as well as for the purity determination of single compounds. Special attention is currently paid to the training of operators and study directors involved in qNMR testing. To assure that only qualified personnel are used for sample preparation at our GxP-accredited laboratory, weighing test was proposed. Sixteen participants performed six-fold weighing of the binary mixture of dibutylated hydroxytoluene (BHT) and 1,2,4,5-tetrachloro-3-nitrobenzene (TCNB). To evaluate the quality of data analysis, all spectra were evaluated manually by a qNMR expert and using in-house developed automated routine. The results revealed that mean values are comparable and both evaluation approaches are free of systematic error. However, automated evaluation resulted in an approximately 20\% increase in precision. The same findings were revealed for qNMR analysis of 32 compounds used in pharmaceutical industry. Weighing test by six-fold determination in binary mixtures and automated qNMR methodology can be recommended as efficient tools for evaluating staff proficiency. The automated qNMR method significantly increases throughput and precision of qNMR for routine measurements and extends application scope of qNMR.},
  language  = {en}
}
@article{KuehnHaugnerStaatetal.2004,
  author    = {K{\"u}hn, Raoul-Roman and Haugner, Werner and Staat, Manfred and Sponagel, Stefan},
  title     = {A Two Phase Mixture Model based on Bone Observation},
  year      = {2004},
  abstract  = {An optimization method is developed to describe the mechanical behaviour of the human cancellous bone. The method is based on a mixture theory. A careful observation of the behaviour of the bone material leads to the hypothesis that the bone density is controlled by the principal stress trajectories (Wolff's law). The basic idea of the developed method is the coupling of a scalar value via an eigenvalue problem to the principal stress trajectories. On the one hand this theory will permit a prediction of the reaction of the biological bone structure after the implantation of a prosthesis, on the other hand it may be useful in engineering optimization problems. An analytical example shows its efficiency.},
  subject      = {Knochen},
  language  = {en}
}
@book{TingsLehnerHossetal.2021,
  author    = {Tings, Franziska and Lehner, Julian and Hoß, Elena and Gotzens, Franziska and Creutz, Marie-Sophie and Christ, Nils},
  title     = {Aachener Online-Schriften Wirtschaft und Recht. Band 02/2021},
  editor    = {Kroll-Ludwigs, Kathrin and Bassen-Metz, Yasmine and Eggert, Mathias and Fritz, Thomas and H{\"o}hne, Tim and Tran, Duc Hung and Vogt, J{\"u}rgen},
  publisher = {FH Aachen / Fachbereich Wirtschaftswissenschaften},
  address   = {Aachen},
  publisher      = {Fachhochschule Aachen},
  pages     = {404 Seiten},
  year      = {2021},
  abstract  = {Inhaltsverzeichnis 1. Die Haftung des GmbH-Gesch{\"a}ftsf{\"u}hrers in der Insolvenz - Grunds{\"a}tze und Modifikationen infolge der Covid-19 Pandemie - Franziska Tings 3-61 2. Disquotale Gewinnaussch{\"u}ttung in der Organschaft - Die Neuregelung des \S 14 Abs. 2 KStG und die Auslegung durch die Finanzverwaltung - Julian Lehner 62-149 3. Auswirkungen des Mauracher Entwurfs auf die Gesellschaft b{\"u}rgerlichen Rechts - Neuerfindung oder bloße Korrektur des Personengesellschaftsrechts? - Elena Hoß 150-209 4. Befristung von Arbeitsverh{\"a}ltnissen - Rechtliche Rahmenbedingungen und arbeitsmarktpolitische Chancen und Risiken - Franziska Gotzens 210-270 5. Die Rolle der psychischen Gesundheit am Arbeitsplatz Entwicklung exemplarischer Handlungsempfehlungen f{\"u}r den ganzheitlichen Umgang mit psychischen Belastungen im Homeoffice - Marie-Sophie Creutz 271-346 6. Tokenisierung von illiquiden Verm{\"o}genswerten - Wie Blockchain die Immobilienwirtschaft ver{\"a}ndern kann - Nils Christ 347-404},
  language  = {de}
}
@book{AbrahamAhmadianBuettgenbachetal.2021,
  author    = {Abraham, Michelle and Ahmadian, Natalia and B{\"u}ttgenbach, Thomas and Keller, Nadja and Paumer, Marc and Plum, Axel},
  title     = {Aachener Online-Schriften Wirtschaft und Recht. Band 1/2021},
  editor    = {Kroll-Ludwigs, Kathrin and Bassen-Metz, Yasmine and Bernecker, Andreas and Eggert, Mathias and Fritz, Thomas and H{\"o}hne, Tim and Tran, Duc Hung and Vogt, J{\"u}rgen},
  publisher = {FH Aachen / Fachbereich Wirtschaftswissenschaften},
  address   = {Aachen},
  publisher      = {Fachhochschule Aachen},
  pages     = {370 Seiten},
  year      = {2021},
  abstract  = {Inhaltsverzeichnis 1. Whistleblowing - Chancen \& Risiken von Hinweisgebersystemen aus Arbeitnehmer- und Arbeitgebersicht - Michelle Abraham 3-70 2. Die Bedeutung und rechtliche Bewertung von Vesting-Klauseln bei der Venture-Capital Finanzierung einer Start-Up GmbH - Natalia Ahmadian 71-137 3. Bewertung der M{\"o}glichkeit zur Einf{\"u}hrung von Tarifvertr{\"a}gen im deutschen Berufsfußball - Thomas B{\"u}ttgenbach 138-190 4. Pflichten und Haftungsrisiken des GmbH-Gesch{\"a}ftsf{\"u}hrers bei Compliance-Verst{\"o}ßen - Naja Keller 191-234 5. Aktienr{\"u}ckk{\"a}ufe auf dem deutschen Markt nach der Finanzkrise 2008/2009 - Marc Paumer 235-287 6. Will Germany reach its 2030 climate goals in the transportation sector? - An investigation focusing on the new German Emission Trading System - Axel Plum 288-369},
  language  = {de}
}
@book{TruempenerPetersHerzeletal.2021,
  author    = {Tr{\"u}mpener, Nora and Peters, Jan and Herzel, Manuel and Vollmann, Alina and Breuer, Gina},
  title     = {Aachener Online-Schriften Wirtschaft und Recht. Band 3/2021},
  editor    = {Kroll-Ludwigs, Kathrin and Bassen-Metz, Yasmine and Eggert, Mathias and Fritz, Thomas and H{\"o}hne, Tim and Tran, Duc Hung and Vogt, J{\"u}rgen},
  publisher = {FH Aachen / Fachbereich Wirtschaftswissenschaften},
  address   = {Aachen},
  publisher      = {Fachhochschule Aachen},
  pages     = {304 Seiten},
  year      = {2021},
  abstract  = {Inhaltsverzeichnis 1. Die ordentliche K{\"u}ndigung chronisch Kranker im Anwendungsbereich des KSchG - Nora Tr{\"u}mpener 3-56 2. Die Legitimationswirkung der Gesellschafterliste - Erfolg trotz Grenzen? - Jan Peters 57-112 3. Marktmanipulation - Arten, Abgrenzung und gesetzliche Handhabe - Manuel Herzel 113-170 4. Die Zul{\"a}ssigkeit der Verdachtsk{\"u}ndigung im Arbeitsverh{\"a}ltnis - Alina Vollmann 171-248 5. Praxisorientierter Arbeitgeberleitfaden zur rechtssicheren Einf{\"u}hrung von Homeoffice im Arbeitsverh{\"a}ltnis - Gina Breuer 249-304},
  language  = {de}
}
@book{BloeckerEsserHengstebecketal.2022,
  author    = {Bl{\"o}cker, Lene Christin and Esser, Julia and Hengstebeck, Pauline and Venrath, Carolin and Scholtes, Eva},
  title     = {Aachener Online-Schriften Wirtschaft und Recht. Band 4. 01/2022},
  editor    = {Kroll-Ludwigs, Kathrin and Bernecker, Andreas and Bassen-Metz, Yasmine and Eggert, Mathias and Fritz, Thomas and Golland, Alexander and H{\"o}hne, Tim and Tran, Duc Hung and Vogt, J{\"u}rgen},
  publisher = {FH Aachen / Fachbereich Wirtschaftswissenschaften},
  address   = {Aachen},
  publisher      = {Fachhochschule Aachen},
  pages     = {345 Seiten},
  year      = {2022},
  abstract  = {Inhaltsverzeichnis - Bachelorarbeiten 1. The impact of the EU non-financial reporting directive on sustainability reporting practices of DAX 30 companies - Lene Christin Bl{\"o}cker 4 - 29 2. Kurzarbeit als Krisenbew{\"a}ltigungsinstrument - Die arbeitsrechtlichen Voraussetzungen f{\"u}r die wirksame Einf{\"u}hrung von Kurzarbeit - Julia Esser 30 - 87 3. Die virtuelle Hauptversammlung der Aktiengesellschaft - Notl{\"o}sung w{\"a}hrend der Corona-Pandemie oder dauerhafte Alternative? - Pauline Hengstebeck 88 - 152 4. Die psychische Gesundheit am Arbeitsplatz - Aktuelle Problematik, Ursachenforschung, Folgen, rechtliche Rahmenbedingungen und geeignete Pr{\"a}ventionsmaßnahmen aus Arbeitgebersicht - Carolin Venrath 153 - 224 Inhaltsverzeichnis - Masterarbeiten The influence of religion on the representation of women in politics - Eva Scholtes 225 - 345},
  language  = {de}
}
@book{BundrockKremersPankoketal.2022,
  author    = {Bundrock, Ronja and Kremers, Nico and Pankok, Lennard and Weisheit, Theresa Maria and Spoede, Jasper},
  title     = {Aachener Online-Schriften Wirtschaft und Recht. Band 5. 02/2022},
  editor    = {Kroll-Ludwigs, Kathrin and Bernecker, Andreas and Bassen-Metz, Yasmine and Eggert, Mathias and Fritz, Thomas and Golland, Alexander and H{\"o}hne, Tim and Tran, Duc Hung and Vogt, J{\"u}rgen},
  publisher = {FH Aachen / Fachbereich Wirtschaftswissenschaften},
  address   = {Aachen},
  publisher      = {Fachhochschule Aachen},
  pages     = {356 Seiten},
  year      = {2022},
  abstract  = {Inhaltsverzeichnis - Bachelorarbeiten 1. Testamentsgestaltung bei Patchworkfamilien - L{\"o}sungsans{\"a}tze f{\"u}r typische Praxisprobleme unter Ber{\"u}cksichtigung der Interessenlagen der Parteien - Ronja Bundrock 4 - 58 2. Die Haftung des AG-Vorstands gegen{\"u}ber der Gesellschaft in unterneh- mensinternen und -externen Krisen - Nico Kremers 59 - 122 3. The Relationship of the Ex-Ante Uncertainty about the Value of a Stock and its IPO Underpricing - An Analysis of the German Market - Lennard Pankok 123 - 179 4. Attractiveness Bias in Venture Capital - An Analysis of Investor Decision Making in "Die H{\"o}hle der L{\"o}wen" - Theresa Maria Weisheit 180 - 242 Inhaltsverzeichnis - Masterarbeiten Erh{\"o}hung der Energieautarkie in der Backbranche - Anwendung von bidi- rektionalem Laden und dessen Auswirkungen auf die Gesch{\"a}ftsprozesse und Informationssysteme - Jasper Spoede 243 - 355},
  language  = {de}
}