@article{Kaemper1996, author = {K{\"a}mper, Klaus-Peter}, title = {Development of low-cost injection moulded micropumps. Entwicklung von kosteng{\"u}nstigen, mittels Spritzguß hergestellten Mikropumpen / D{\"o}pper, J. (u.a.)}, series = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH}, journal = {Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH}, address = {Bremen}, pages = {37 -- 40}, year = {1996}, language = {en} } @article{StarkeDrews1985, author = {Starke, G{\"u}nther and Drews, P.}, title = {Development approaches for advanced control in automated arc welding}, pages = {115 -- 124}, year = {1985}, language = {en} } @article{EnningJenayehMuelleretal.1997, author = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Rake, Heinrich}, title = {Development and realization of a manipulator for automatic decoupling of freight cars in marshalling yards / Jenayeh, I. ; M{\"u}ller, C. ; Enning, Manfred ; Rake, Heinrich ; Peter, J.}, year = {1997}, language = {en} } @article{FrankoDuKallweitetal.2020, author = {Franko, Josef and Du, Shengzhi and Kallweit, Stephan and Duelberg, Enno Sebastian and Engemann, Heiko}, title = {Design of a Multi-Robot System for Wind Turbine Maintenance}, series = {Energies}, volume = {13}, journal = {Energies}, number = {10}, publisher = {MDPI}, address = {Basel}, issn = {1996-1073}, doi = {10.3390/en13102552}, pages = {Article 2552}, year = {2020}, abstract = {The maintenance of wind turbines is of growing importance considering the transition to renewable energy. This paper presents a multi-robot-approach for automated wind turbine maintenance including a novel climbing robot. Currently, wind turbine maintenance remains a manual task, which is monotonous, dangerous, and also physically demanding due to the large scale of wind turbines. Technical climbers are required to work at significant heights, even in bad weather conditions. Furthermore, a skilled labor force with sufficient knowledge in repairing fiber composite material is rare. Autonomous mobile systems enable the digitization of the maintenance process. They can be designed for weather-independent operations. This work contributes to the development and experimental validation of a maintenance system consisting of multiple robotic platforms for a variety of tasks, such as wind turbine tower and rotor blade service. In this work, multicopters with vision and LiDAR sensors for global inspection are used to guide slower climbing robots. Light-weight magnetic climbers with surface contact were used to analyze structure parts with non-destructive inspection methods and to locally repair smaller defects. Localization was enabled by adapting odometry for conical-shaped surfaces considering additional navigation sensors. Magnets were suitable for steel towers to clamp onto the surface. A friction-based climbing ring robot (SMART— Scanning, Monitoring, Analyzing, Repair and Transportation) completed the set-up for higher payload. The maintenance period could be extended by using weather-proofed maintenance robots. The multi-robot-system was running the Robot Operating System (ROS). Additionally, first steps towards machine learning would enable maintenance staff to use pattern classification for fault diagnosis in order to operate safely from the ground in the future.}, language = {en} } @article{Grundmann1992, author = {Grundmann, Reinhard}, title = {Design Criteria for Aeroacoustic Wind Tunnels}, year = {1992}, language = {en} } @article{Knepper1985, author = {Knepper, Ludger}, title = {Der moderne Luftfrachtverkehr - leistungsfaehig durch seine bodengebundenen Umschlagssysteme}, pages = {60 -- 69}, year = {1985}, language = {de} } @article{Wollert2014, author = {Wollert, J{\"o}rg}, title = {Der Embedded Wireless-Report}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, publisher = {WEKA-Fachmedien}, address = {Haar}, issn = {0013-5658}, pages = {18 -- 25}, year = {2014}, language = {de} } @article{GrundmannBommesKlaesetal.1995, author = {Grundmann, Reinhard and Bommes, Leonhard and Klaes, Klaus and Kramer, Carl u.a.}, title = {Der Einfluß der Schaufelgestalt von Zentrifugall{\"u}ftern auf deren Leistung und Ger{\"a}uschpegel}, series = {Noise Control Engineering Journal. 43 (1995), H. 4}, journal = {Noise Control Engineering Journal. 43 (1995), H. 4}, isbn = {0736-2501}, pages = {91 -- 101}, year = {1995}, language = {de} } @article{GrundmannKramerKonrath2001, author = {Grundmann, Reinhard and Kramer, C. and Konrath, B.}, title = {Der Aeroakustik-Fahrzeugwindkanal von Ford.}, series = {Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10}, journal = {Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10}, isbn = {0001-2785}, pages = {932 -- 938}, year = {2001}, language = {de} } @article{PfaffSchmidt2016, author = {Pfaff, Raphael and Schmidt, Bernd}, title = {Daten in der Cloud - und dann?}, series = {Deine Bahn}, journal = {Deine Bahn}, number = {6}, publisher = {Bahn-Fachverlag}, address = {Berlin}, issn = {0948-7263}, pages = {50 -- 55}, year = {2016}, abstract = {Schienenverkehrssysteme stehen in zunehmendem Wettbewerb, sowohl untereinander als auch mit anderen Verkehrstr{\"a}gern. Als wichtiger Aspekt zur Steigerung der Kosteneffizienz wird die Digitalisierung des Betriebs und der Fahrzeuge betrachtet. {\"U}ber eine Prognose der Ausfallwahrscheinlichkeit bzw. Restlebensdauer von Subsystemen k{\"o}nnen mittels Digitalisierung die Instandhaltungskosten gesenkt werden. Die geringen Fehlerraten im System Bahn machen die Nutzung besonderer Simulationstechniken notwendig. In diesem Beitrag wird gezeigt, wie sich die Subsystemverf{\"u}gbarkeit aus den beobachteten Fehlerraten der Teilfunktionen vorhersagen l{\"a}sst.}, language = {de} } @article{Starke1999, author = {Starke, G{\"u}nther}, title = {Das Verbundvorhaben 'PROJOIN'. Motivation und Ziele.}, series = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor : neue Wege f{\"u}r die Fertigung von morgen ; Ergebnisse einer vom BMBF gef{\"o}rderten europ{\"a}ischen Forschungskooperation im Rahmen von EUREKA-FAKTORY] / P. Drews ; G. K{\"o}hler (Hrsg.)}, journal = {Qualit{\"a}tsorientierte Schweißtechnik als Wettbewerbsfaktor : neue Wege f{\"u}r die Fertigung von morgen ; Ergebnisse einer vom BMBF gef{\"o}rderten europ{\"a}ischen Forschungskooperation im Rahmen von EUREKA-FAKTORY] / P. Drews ; G. K{\"o}hler (Hrsg.)}, publisher = {DVS-Verl}, address = {D{\"u}sseldorf}, isbn = {3-87155-663-7}, pages = {7 -- 14}, year = {1999}, language = {de} } @article{AbbasBalcBremenetal.2022, author = {Abbas, Karim and Balc, Nicolae and Bremen, Sebastian and Skupin, Marco}, title = {Crystallization and aging behavior of polyetheretherketone PEEK within rapid tooling and rubber molding}, series = {Journal of Manufacturing and Materials Processing}, volume = {6}, journal = {Journal of Manufacturing and Materials Processing}, number = {5}, publisher = {MDPI}, address = {Basel}, issn = {2504-4494}, doi = {10.3390/jmmp6050093}, pages = {1 -- 12}, year = {2022}, abstract = {In times of short product life cycles, additive manufacturing and rapid tooling are important methods to make tool development and manufacturing more efficient. High-performance polymers are the key to mold production for prototypes and small series. However, the high temperatures during vulcanization injection molding cause thermal aging and can impair service life. The extent to which the thermal stress over the entire process chain stresses the material and whether it leads to irreversible material aging is evaluated. To this end, a mold made of PEEK is fabricated using fused filament fabrication and examined for its potential application. The mold is heated to 200 ◦C, filled with rubber, and cured. A differential scanning calorimetry analysis of each process step illustrates the crystallization behavior and first indicates the material resistance. It shows distinct cold crystallization regions at a build chamber temperature of 90 ◦C. At an ambient temperature above Tg, crystallization of 30\% is achieved, and cold crystallization no longer occurs. Additional tensile tests show a decrease in tensile strength after ten days of thermal aging. The steady decrease in recrystallization temperature indicates degradation of the additives. However, the tensile tests reveal steady embrittlement of the material due to increasing crosslinking.}, language = {en} } @article{KaemperSchmittGuentherodtetal.1987, author = {K{\"a}mper, Klaus-Peter and Schmitt, W. and G{\"u}ntherodt, G. and Gambino, R. J.}, title = {CrO2—A New Half-Metallic Ferromagnet? K{\"a}mper, K.-P.; Schmitt, W.; G{\"u}ntherodt, G.; Gambino, R. J., Ruf, R.}, series = {Physical Review Letters. 59 (1987), H. 24}, journal = {Physical Review Letters. 59 (1987), H. 24}, isbn = {1079-7114}, pages = {2788 -- 2791}, year = {1987}, language = {en} } @article{EnningStuetzleVierecketal.2006, author = {Enning, Manfred and St{\"u}tzle, Thorsten and Viereck, Uwe and Stribersky, Anton}, title = {Creepage control for use in wheelslide protection systems / St{\"u}tzle, Thorsten ; Viereck, Uwe ; Stribersky, Anton ; Rulka, Wolfgang ; Enning, Manfred ; Abel, Dirk}, series = {Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control}, journal = {Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control}, isbn = {0742-5953}, pages = {1 CD-ROM}, year = {2006}, language = {en} } @article{StarkeKuhneFrassek1984, author = {Starke, G{\"u}nther and Kuhne, A.H. and Frassek, B.}, title = {Components for the automated GMAW process. Bestandteile des automatischen Metall-Schutzgas-Schweissverfahrens}, series = {Welding Journal. 63 (1984), H. 1}, journal = {Welding Journal. 63 (1984), H. 1}, isbn = {0043-2296}, pages = {31 -- 34}, year = {1984}, language = {en} } @article{Klocke1981, author = {Klocke, Martina}, title = {CNC-Technik holt auf bei der Feinbearbeitung / Voelmy, M.}, series = {VDI-Nachrichten (1981)}, journal = {VDI-Nachrichten (1981)}, year = {1981}, language = {de} } @article{WollbrinkMasloZimmeretal.2020, author = {Wollbrink, Moritz and Maslo, Semir and Zimmer, Daniel and Abbas, Karim and Arntz, Kristian and Bergs, Thomas}, title = {Clamping and substrate plate system for continuous additive build-up and post-processing of metal parts}, series = {Procedia CIRP}, volume = {93}, journal = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2020.04.015}, pages = {108 -- 113}, year = {2020}, abstract = {The manufacturing share of laser powder bed fusion (L-PBF) increases in industrial application, but still many process steps are manually operated. Additionally, it is not possible to achieve tight dimensional tolerances or low surfaces roughness. Hence, a process chain has to be set up to combine additive manufacturing (AM) with further machining technologies. To achieve a continuous workpiece flow as basis for further industrialization of L-PBF, the paper presents a novel substrate system and its application on L-PBF machines and post-processing. The substrate system consists of a zero-point clamping system and a matrix-like interface of contact pins to be substantially connected to the workpiece within the L-PBF process.}, language = {en} } @article{MukherjeeRamazaniYangetal.2011, author = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir}, title = {Characterization of gas metal arc welded hot rolled DP600 steel}, series = {Steel research international}, volume = {Vol. 82}, journal = {Steel research international}, number = {Iss. 12}, publisher = {Wiley}, address = {Weinheim}, issn = {1869-344X (E-Book); 1611-3683 (Print)}, pages = {1408 -- 1416}, year = {2011}, language = {en} } @article{MukherjeePrahlBlecketal.2010, author = {Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir}, title = {Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels}, series = {Materialwissenschaft und Werkstofftechnik}, volume = {41}, journal = {Materialwissenschaft und Werkstofftechnik}, number = {11}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1521-4052}, doi = {10.1002/mawe.201000692}, pages = {972 -- 983}, year = {2010}, abstract = {The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.}, language = {en} } @article{Hanrath1989, author = {Hanrath, Wilhelm}, title = {Character tables of some factor groups of space groups}, series = {Perfect groups / Derek F. Holt and W. Plesken}, journal = {Perfect groups / Derek F. Holt and W. Plesken}, publisher = {Clarendon Press}, address = {Oxford}, isbn = {0-19-853559-7}, pages = {357 -- 359}, year = {1989}, language = {en} }