@article{MolinnusHardtSiegertetal.2018,
  author    = {Molinnus, Denise and Hardt, Gabriel and Siegert, Petra and Willenberg, Holger S. and Poghossian, Arshak and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Detection of Adrenaline in Blood Plasma as Biomarker for Adrenal Venous Sampling},
  series = {Electroanalysis},
  volume    = {30},
  journal   = {Electroanalysis},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4109},
  doi       = {10.1002/elan.201800026},
  pages     = {937 -- 942},
  year      = {2018},
  abstract  = {An amperometric bi-enzyme biosensor based on substrate recycling principle for the amplification of the sensor signal has been developed for the detection of adrenaline in blood. Adrenaline can be used as biomarker verifying successful adrenal venous sampling procedure. The adrenaline biosensor has been realized via modification of a galvanic oxygen sensor with a bi-enzyme membrane combining a genetically modified laccase and a pyrroloquinoline quinone-dependent glucose dehydrogenase. The measurement conditions such as pH value and temperature were optimized to enhance the sensor performance. A high sensitivity and a low detection limit of about 0.5-1 nM adrenaline have been achieved in phosphate buffer at pH 7.4, relevant for measurements in blood samples. The sensitivity of the biosensor to other catecholamines such as noradrenaline, dopamine and dobutamine has been studied. Finally, the sensor has been successfully applied for the detection of adrenaline in human blood plasma.},
  language  = {en}
}
@article{OberlaenderMayerGreeffetal.2018,
  author    = {Oberl{\"a}nder, Jan and Mayer, Marlena and Greeff, Anton and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Spore-based biosensor to monitor the microbicidal efficacy of gaseous hydrogen peroxide sterilization processes},
  series = {Biosensors and Bioelectronics},
  volume    = {104},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2017.12.045},
  pages     = {87 -- 94},
  year      = {2018},
  abstract  = {In this work, a spore-based biosensor is evaluated to monitor the microbicidal efficacy of sterilization processes applying gaseous hydrogen peroxide (H2O2). The sensor is based on interdigitated electrode structures (IDEs) that have been fabricated by means of thin-film technologies. Impedimetric measurements are applied to study the effect of sterilization process on spores of Bacillus atrophaeus. This resilient microorganism is commonly used in industry to proof the sterilization efficiency. The sensor measurements are accompanied by conventional microbiological challenge tests, as well as morphological characterizations with scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The sensor measurements are correlated with the microbiological test routines. In both methods, namely the sensor-based and microbiological one, a tailing effect has been observed. The results are evaluated and discussed in a three-dimensional calibration plot demonstrating the sensor's suitability to enable a rapid process decision in terms of a successfully performed sterilization.},
  language  = {en}
}
@book{Molinnus2018,
  author    = {Molinnus, Denise},
  title     = {Integration of biomolecular logic principles with electronic transducers on a chip},
  publisher = {Philipps-Universit{\"a}t / Fachbereich Pharmazie},
  address   = {Marburg/Lahn},
  year      = {2018},
  language  = {de}
}
@article{FigueroaMirandaFengShiuetal.2018,
  author    = {Figueroa-Miranda, Gabriela and Feng, Lingyan and Shiu, Simon Chi-Chin and Dirkzwager, Roderick Marshall and Cheung, Yee-Wai and Tanner, Julian Alexander and Sch{\"o}ning, Michael Josef and Offenh{\"a}usser, Andreas and Mayer, Dirk},
  title     = {Aptamer-based electrochemical biosensor for highly sensitive and selective malaria detection with adjustable dynamic response range and reusability},
  series = {Sensor and Actuators B: Chemical},
  volume    = {255},
  journal   = {Sensor and Actuators B: Chemical},
  number    = {P1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2017.07.117},
  pages     = {235 -- 243},
  year      = {2018},
  abstract  = {Malaria infection remains a significant risk for much of the population of tropical and subtropical areas, particularly in developing countries. Therefore, it is of high importance to develop sensitive, accurate and inexpensive malaria diagnosis tests. Here, we present a novel aptamer-based electrochemical biosensor (aptasensor) for malaria detection by impedance spectroscopy, through the specific recognition between a highly discriminatory DNA aptamer and its target Plasmodium falciparum lactate dehydrogenase (PfLDH). Interestingly, due to the isoelectric point (pI) of PfLDH, the aptasensor response showed an adjustable detection range based on the different protein net-charge at variable pH environments. The specific aptamer recognition allows sensitive protein detection with an expanded detection range and a low detection limit, as well as a high specificity for PfLDH compared to analogous proteins. The specific feasibility of the aptasensor is further demonstrated by detection of the target PfLDH in human serum. Furthermore, the aptasensor can be easily regenerated and thus applied for multiple usages. The robustness, sensitivity, and reusability of the presented aptasensor make it a promising candidate for point-of-care diagnostic systems.},
  language  = {en}
}
@article{MiyamotoSekiSutoetal.2018,
  author    = {Miyamoto, Koichiro and Seki, Kosuke and Suto, Takeyuki and Werner, Frederik and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Improved spatial resolution of the chemical imaging sensor with a hybrid illumination that suppresses lateral diffusion of photocarriers},
  series = {Sensor and Actuators B: Chemical},
  volume    = {273},
  journal   = {Sensor and Actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2018.07.016},
  pages     = {1328 -- 1333},
  year      = {2018},
  abstract  = {The chemical imaging sensor is a semiconductor-based chemical sensor capable of visualizing pH and ion distributions. The spatial resolution depends on the lateral diffusion of photocarriers generated by illumination of the semiconductor substrate. In this study, two types of optical setups, one based on a bundle of optical fibers and the other based on a binocular tube head, were developed to project a hybrid illumination of a modulated light beam and a ring-shaped constant illumination onto the sensor plate. An improved spatial resolution was realized by the ring-shaped constant illumination, which suppressed lateral diffusion of photocarriers by enhanced recombination due to the increased carrier concentration.},
  language  = {en}
}
@article{RoehlenPilasDahmenetal.2018,
  author    = {R{\"o}hlen, Desiree and Pilas, Johanna and Dahmen, Markus and Keusgen, Michael and Selmer, Thorsten and Sch{\"o}ning, Michael Josef},
  title     = {Toward a Hybrid Biosensor System for Analysis of Organic and Volatile Fatty Acids in Fermentation Processes},
  series = {Frontiers in Chemistry},
  journal   = {Frontiers in Chemistry},
  number    = {6},
  publisher = {Frontiers},
  address   = {Lausanne},
  doi       = {10.3389/fchem.2018.00284},
  pages     = {Artikel 284},
  year      = {2018},
  abstract  = {Monitoring of organic acids (OA) and volatile fatty acids (VFA) is crucial for the control of anaerobic digestion. In case of unstable process conditions, an accumulation of these intermediates occurs. In the present work, two different enzyme-based biosensor arrays are combined and presented for facile electrochemical determination of several process-relevant analytes. Each biosensor utilizes a platinum sensor chip (14 × 14 mm²) with five individual working electrodes. The OA biosensor enables simultaneous measurement of ethanol, formate, d- and l-lactate, based on a bi-enzymatic detection principle. The second VFA biosensor provides an amperometric platform for quantification of acetate and propionate, mediated by oxidation of hydrogen peroxide. The cross-sensitivity of both biosensors toward potential interferents, typically present in fermentation samples, was investigated. The potential for practical application in complex media was successfully demonstrated in spiked sludge samples collected from three different biogas plants. Thereby, the results obtained by both of the biosensors were in good agreement to the applied reference measurements by photometry and gas chromatography, respectively. The proposed hybrid biosensor system was also used for long-term monitoring of a lab-scale biogas reactor (0.01 m³) for a period of 2 months. In combination with typically monitored parameters, such as gas quality, pH and FOS/TAC (volatile organic acids/total anorganic carbonate), the amperometric measurements of OA and VFA concentration could enhance the understanding of ongoing fermentation processes.},
  language  = {en}
}
@article{RodriguesMoraisNordietal.2018,
  author    = {Rodrigues, Raul T. and Morais, Paulo V. and Nordi, Cristina S. F. and Sch{\"o}ning, Michael Josef and Siqueira Jr., Jos{\´e} R. and Caseli, Luciano},
  title     = {Carbon Nanotubes and Algal Polysaccharides To Enhance the Enzymatic Properties of Urease in Lipid Langmuir-Blodgett Films},
  series = {Langmuir},
  volume    = {34},
  journal   = {Langmuir},
  number    = {9},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {1520-5827},
  doi       = {10.1021/acs.langmuir.7b04317},
  pages     = {3082 -- 3093},
  year      = {2018},
  abstract  = {Algal polysaccharides (extracellular polysaccharides) and carbon nanotubes (CNTs) were adsorbed on dioctadecyldimethylammonium bromide Langmuir monolayers to serve as a matrix for the incorporation of urease. The physicochemical properties of the supramolecular system as a monolayer at the air-water interface were investigated by surface pressure-area isotherms, surface potential-area isotherms, interfacial shear rheology, vibrational spectroscopy, and Brewster angle microscopy. The floating monolayers were transferred to hydrophilic solid supports, quartz, mica, or capacitive electrolyte-insulator-semiconductor (EIS) devices, through the Langmuir-Blodgett (LB) technique, forming mixed films, which were investigated by quartz crystal microbalance, fluorescence spectroscopy, and field emission gun scanning electron microscopy. The enzyme activity was studied with UV-vis spectroscopy, and the feasibility of the thin film as a urea sensor was essayed in an EIS sensor device. The presence of CNT in the enzyme-lipid LB film not only tuned the catalytic activity of urease but also helped to conserve its enzyme activity. Viability as a urease sensor was demonstrated with capacitance-voltage and constant capacitance measurements, exhibiting regular and distinctive output signals over all concentrations used in this work. These results are related to the synergism between the compounds on the active layer, leading to a surface morphology that allowed fast analyte diffusion owing to an adequate molecular accommodation, which also preserved the urease activity. This work demonstrates the feasibility of employing LB films composed of lipids, CNT, algal polysaccharides, and enzymes as EIS devices for biosensing applications.},
  language  = {en}
}
@book{SchoeningPoghossian2018,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {Label-free biosensing: advanced materials, devices and applications},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-75219-8},
  pages     = {xii, 480 Seiten ; Illustrationen, Diagramme},
  year      = {2018},
  language  = {en}
}
@incollection{YoshinobuKrauseMiyamotoetal.2018,
  author    = {Yoshinobu, Tatsuo and Krause, Steffi and Miyamoto, Ko-ichiro and Werner, Frederik and Poghossian, Arshak and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {(Bio-)chemical Sensing and Imaging by LAPS and SPIM},
  series = {Label-free biosensing: advanced materials, devices and applications},
  booktitle = {Label-free biosensing: advanced materials, devices and applications},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-75219-8},
  pages     = {103 -- 132},
  year      = {2018},
  abstract  = {The light-addressable potentiometric sensor (LAPS) and scanning photo-induced impedance microscopy (SPIM) are two closely related methods to visualise the distributions of chemical species and impedance, respectively, at the interface between the sensing surface and the sample solution. They both have the same field-effect structure based on a semiconductor, which allows spatially resolved and label-free measurement of chemical species and impedance in the form of a photocurrent signal generated by a scanning light beam. In this article, the principles and various operation modes of LAPS and SPIM, functionalisation of the sensing surface for measuring various species, LAPS-based chemical imaging and high-resolution sensors based on silicon-on-sapphire substrates are described and discussed, focusing on their technical details and prospective applications.},
  language  = {en}
}
@incollection{SchoeningWagnerPoghossianetal.2018,
  author    = {Sch{\"o}ning, Michael Josef and Wagner, Torsten and Poghossian, Arshak and Miyamoto, K.I. and Werner, C.F. and Krause, S. and Yoshinobu, T.},
  title     = {Light-addressable potentiometric sensors for (bio-)chemical sensing and imaging},
  series = {Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry. Vol. 7},
  booktitle = {Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry. Vol. 7},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {9780128097397},
  pages     = {295 -- 308},
  year      = {2018},
  language  = {en}
}
@incollection{SchoeningPoghossian2018,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {Enzyme und Biosensorik},
  series = {Einf{\"u}hrung in die Enzymtechnologie},
  booktitle = {Einf{\"u}hrung in die Enzymtechnologie},
  publisher = {Springer Spektrum},
  address   = {Berlin},
  isbn      = {978-3-662-57619-9},
  doi       = {10.1007/978-3-662-57619-9_18},
  pages     = {323 -- 347},
  year      = {2018},
  abstract  = {Enzymbasierte Biosensoren finden seit mehr als f{\"u}nf Jahrzehnten einen prosperierenden Wachstumsmarkt und werden zunehmend auch in biotechnologischen Prozessen eingesetzt. In diesem Kapitel werden, ausgehend vom Sensorbegriff und typischen Kenngr{\"o}ßen f{\"u}r Biosensoren (Abschn. 18.1), elektrochemische Enzym-Biosensoren vorgestellt und deren typischen Einsatzgebiete diskutiert (Abschn. 18.2). Ein Blick {\"u}ber den „Tellerrand" hinaus zeigt alternative Transduktorprinzipien (Abschn. 18.3) und f{\"u}hrt abschließend in aktuelle Forschungstrends ein (Abschn. 18.4).},
  language  = {de}
}
@article{RabehiGarlanAchtsnichtetal.2018,
  author    = {Rabehi, Amine and Garlan, Benjamin and Achtsnicht, Stefan and Krause, Hans-Joachim and Offenh{\"a}usser, Andreas and Ngo, Kieu and Neveu, Sophie and Graff-Dubois, Stephanie and Kokabi, Hamid},
  title     = {Magnetic detection structure for Lab-on-Chip applications based on the frequency mixing technique},
  series = {Sensors},
  volume    = {18},
  journal   = {Sensors},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s18061747},
  pages     = {14 Seiten},
  year      = {2018},
  abstract  = {A magnetic frequency mixing technique with a set of miniaturized planar coils was investigated for use with a completely integrated Lab-on-Chip (LoC) pathogen sensing system. The system allows the detection and quantification of superparamagnetic beads. Additionally, in terms of magnetic nanoparticle characterization ability, the system can be used for immunoassays using the beads as markers. Analytical calculations and simulations for both excitation and pick-up coils are presented; the goal was to investigate the miniaturization of simple and cost-effective planar spiral coils. Following these calculations, a Printed Circuit Board (PCB) prototype was designed, manufactured, and tested for limit of detection, linear response, and validation of theoretical concepts. Using the magnetic frequency mixing technique, a limit of detection of 15 µg/mL of 20 nm core-sized nanoparticles was achieved without any shielding.},
  language  = {en}
}
@article{MoraisSilvaDantasetal.2019,
  author    = {Morais, Paulo V. and Silva, Anielle C. A. and Dantas, Noelio O. and Sch{\"o}ning, Michael Josef and Siqueira, Jos{\´e} R., Jr.},
  title     = {Hybrid Layer-by-Layer Film of Polyelectrolytes-Embedded Catalytic CoFe2O4 Nanocrystals as Sensing Units in Capacitive Electrolyte-Insulator-Semiconductor Devices},
  series = {physica status solidi a : applications and materials sciences},
  volume    = {216},
  journal   = {physica status solidi a : applications and materials sciences},
  number    = {1900044},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/pssa.201900044},
  pages     = {1 -- 9},
  year      = {2019},
  language  = {en}
}
@article{BreuerPilasGuthmannetal.2019,
  author    = {Breuer, Lars and Pilas, Johanna and Guthmann, Eric and Sch{\"o}ning, Michael Josef and Thoelen, Ronald and Wagner, Torsten},
  title     = {Towards light-addressable flow control: responsive hydrogels with incorporated graphene oxide as laser-driven actuator structures within microfluidic channels},
  series = {Sensor and Actuators B: Chemical},
  volume    = {288},
  journal   = {Sensor and Actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2019.02.086},
  pages     = {579 -- 585},
  year      = {2019},
  language  = {en}
}
@article{CornelisGivanoudiYongabietal.2019,
  author    = {Cornelis, Peter and Givanoudi, Stella and Yongabi, Derick and Iken, Heiko and Duw{\´e}, Sam and Deschaume, Olivier and Robbens, Johan and Dedecker, Peter and Bartic, Carmen and W{\"u}bbenhorst, Michael and Sch{\"o}ning, Michael Josef and Heyndrickx, Marc and Wagner, Patrick},
  title     = {Sensitive and specific detection of E. coli using biomimetic receptors in combination with a modified heat-transfer method},
  series = {Biosensors and Bioelectronics},
  volume    = {136},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2019.04.026},
  pages     = {97 -- 105},
  year      = {2019},
  language  = {en}
}
@article{PoghossianGeisslerSchoening2019,
  author    = {Poghossian, Arshak and Geissler, Hanno and Sch{\"o}ning, Michael Josef},
  title     = {Rapid methods and sensors for milk quality monitoring and spoilage detection},
  series = {Biosensors and Bioelectronics},
  volume    = {140},
  journal   = {Biosensors and Bioelectronics},
  number    = {Article 111272},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2019.04.040},
  year      = {2019},
  language  = {en}
}
@article{DantismRoehlenWagneretal.2019,
  author    = {Dantism, Shahriar and R{\"o}hlen, Desiree and Wagner, Torsten and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {A LAPS-based differential sensor for parallelized metabolism monitoring of various bacteria},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {21},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19214692},
  pages     = {Artikel 4692},
  year      = {2019},
  abstract  = {Monitoring the cellular metabolism of bacteria in (bio)fermentation processes is crucial to control and steer them, and to prevent undesired disturbances linked to metabolically inactive microorganisms. In this context, cell-based biosensors can play an important role to improve the quality and increase the yield of such processes. This work describes the simultaneous analysis of the metabolic behavior of three different types of bacteria by means of a differential light-addressable potentiometric sensor (LAPS) set-up. The study includes Lactobacillus brevis, Corynebacterium glutamicum, and Escherichia coli, which are often applied in fermentation processes in bioreactors. Differential measurements were carried out to compensate undesirable influences such as sensor signal drift, and pH value variation during the measurements. Furthermore, calibration curves of the cellular metabolism were established as a function of the glucose concentration or cell number variation with all three model microorganisms. In this context, simultaneous (bio)sensing with the multi-organism LAPS-based set-up can open new possibilities for a cost-effective, rapid detection of the extracellular acidification of bacteria on a single sensor chip. It can be applied to evaluate the metabolic response of bacteria populations in a (bio)fermentation process, for instance, in the biogas fermentation process.},
  language  = {en}
}
@article{KarschuckFilipovBollellaetal.2019,
  author    = {Karschuck, T. L. and Filipov, Y. and Bollella, P. and Sch{\"o}ning, Michael Josef and Katz, E.},
  title     = {Not-XOR (NXOR) logic gate based on an enzyme-catalyzed reaction},
  series = {International Journal of Unconventional Computing},
  volume    = {14},
  journal   = {International Journal of Unconventional Computing},
  number    = {3-4},
  publisher = {Old City Publishing},
  address   = {Philadelphia},
  issn      = {1548-7199},
  pages     = {235 -- 242},
  year      = {2019},
  abstract  = {Enzyme-catalyzed reactions have been designed to mimic various Boolean logic gates in the general framework of unconventional biomolecular computing. While some of the logic gates, particularly OR, AND, are easy to realize with biocatalytic reactions and have been reported in numerous publications, some other, like NXOR, are very challenging and have not been realized yet with enzyme reactions. The paper reports on a novel approach to mimicking the NXOR logic gate using the bell-shaped enzyme activity dependent on pH values. Shifting pH from the optimum value to the acidic or basic values by using acid or base inputs (meaning 1,0 and 0,1 inputs) inhibits the enzyme reaction, while keeping the optimum pH (assuming 0,0 and 1,1 input combinations) preserves a high enzyme activity. The challenging part of the present approach is the selection of an enzyme with a well-demonstrated bell-shape activity dependence on the pH value. While many enzymes can satisfy this condition, we selected pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase as this enzyme has the optimum pH center-located on the pH scale allowing the enzyme activity change by the acidic and basic pH shift from the optimum value corresponding to the highest activity. The present NXOR gate is added to the biomolecular "toolbox" as a new example of Boolean logic gates based on enzyme reactions.},
  language  = {en}
}
@article{ArreolaKeusgenSchoening2019,
  author    = {Arreola, Julio and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Toward an immobilization method for spore-based biosensors in oxidative environment},
  series = {Electrochimica Acta},
  volume    = {302},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.electacta.2019.01.148},
  pages     = {394 -- 401},
  year      = {2019},
  language  = {en}
}
@article{BronderPoghossianJessingetal.2019,
  author    = {Bronder, Thomas and Poghossian, Arshak and Jessing, Max P. and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Surface regeneration and reusability of label-free DNA biosensors based on weak polyelectrolyte-modified capacitive field-effect structures},
  series = {Biosensors and Bioelectronics},
  volume    = {126},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2018.11.019},
  pages     = {510 -- 517},
  year      = {2019},
  language  = {en}
}