@inproceedings{HellmannsBoehmDilger2008,
  author    = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus},
  title     = {Weight and noise reduction in power transmissions through epoxy resin foams},
  series = {Proceedings of the 31st annual meeting of the Adhesion Society : 17. - 20.2.2008, Austin, Texas},
  booktitle = {Proceedings of the 31st annual meeting of the Adhesion Society : 17. - 20.2.2008, Austin, Texas},
  publisher = {Adhesion Society},
  address   = {Blacksburg},
  organization    = {Adhesion Society},
  pages     = {291 -- 293},
  year      = {2008},
  language  = {en}
}
@inproceedings{KarimiButenwegToll2005,
  author    = {Karimi, Iman and Butenweg, Christoph and Toll, Britta},
  title     = {Vulnerability assessment of industrial facilities},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  doi       = {10.4203/ccp.81.34},
  pages     = {34, 73 -- 75},
  year      = {2005},
  language  = {en}
}
@inproceedings{AltayButenwegKlinkeletal.2014,
  author    = {Altay, Okyay and Butenweg, Christoph and Klinkel, Sven and Taddei, Francesca},
  title     = {Vibration mitigation of wind turbine towers by tuned liquid column dampers},
  series = {Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)},
  booktitle = {Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)},
  address   = {Porto},
  organization    = {European Conference on Structural Dynamics, EURODYN <9, 2014, Porto>},
  isbn      = {978-972-752-165-4},
  pages     = {1531 -- 1538},
  year      = {2014},
  language  = {en}
}
@inproceedings{AltayButenwegKlinkel2014,
  author    = {Altay, Okyay and Butenweg, Christoph and Klinkel, Sven},
  title     = {Vibration mitigation of wind turbine towers by a new semiactive Tuned Liquid Column Damper},
  series = {6. Word Congress on Structural Control and Monitoring, 15 - 17 July, 2014 Barcelona,Spain},
  booktitle = {6. Word Congress on Structural Control and Monitoring, 15 - 17 July, 2014 Barcelona,Spain},
  year      = {2014},
  language  = {en}
}
@inproceedings{AltayButenwegKlinkel2013,
  author    = {Altay, Okyay and Butenweg, Christoph and Klinkel, Sven},
  title     = {Vibration control of slender structures by semi-active tuned liquid column dampers},
  series = {Conference of the ASCE Engineering Mechanics Institute , Evanston, IL , USA , EMI 2013 , 2013-08-04 - 2013-08-07},
  booktitle = {Conference of the ASCE Engineering Mechanics Institute , Evanston, IL , USA , EMI 2013 , 2013-08-04 - 2013-08-07},
  pages     = {1 Seite},
  year      = {2013},
  language  = {en}
}
@inproceedings{TewariNeshvadGoldbachetal.2015,
  author    = {Tewari, Udit and Neshvad, Surena and Goldbach, Daniel and Sachau, J{\"u}rgen},
  title     = {Verification and Implementation of Pseudo-Random-Binary-Sequences for Online Determination of Grid Impedance Spectrum},
  series = {International Conference on Renewable Energies and Power Quality (ICREPQ´15), La Conuna, Spain, 25th to 27th March, 2015},
  booktitle = {International Conference on Renewable Energies and Power Quality (ICREPQ´15), La Conuna, Spain, 25th to 27th March, 2015},
  pages     = {6 Seiten},
  year      = {2015},
  language  = {en}
}
@inproceedings{KobGoemmelButenwegetal.2006,
  author    = {Kob, Malte and G{\"o}mmel, Andreas and Butenweg, Christoph and Niendorf, Thoralf},
  title     = {Training of a combined model of larynx and vocal folds with data from MRI measurements},
  series = {The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings},
  booktitle = {The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings},
  organization    = {International Conference on Voice Physiology and Biomechanics <5, 2006, Tokyo>},
  pages     = {45 -- 46},
  year      = {2006},
  language  = {en}
}
@inproceedings{SteuerDankert2023,
  author    = {Steuer-Dankert, Linda},
  title     = {Training future skills - sustainability, interculturality \& innovation in a digital design thinking format},
  series = {Proceedings of the 19th International CDIO Conference},
  booktitle = {Proceedings of the 19th International CDIO Conference},
  pages     = {12 Seiten},
  year      = {2023},
  abstract  = {The complex questions of today for a world of tomorrow are characterized by their global impact. Solutions must therefore not only be sustainable in the sense of the three pillars of sustainability (economic, environmental, and social) but must also function globally. This goes hand in hand with the need for intercultural acceptance of developed services and products. To achieve this, engineers, as the problem solvers of the future, must be able to work in intercultural teams on appropriate solutions, and be sensitive to intercultural perspectives. To equip the engineers of the future with the so-called future skills, teaching concepts are needed in which students can acquire these methods and competencies in application-oriented formats. The presented course "Applying Design Thinking - Sustainability, Innovation and Interculturality" was developed to teach future skills from the competency areas Digital Key Competencies, Classical Competencies and Transformative Competencies. The CDIO Standard 3.0, in particular the standards 5, 6, 7 and 8, was used as a guideline. The course aims to prepare engineering students from different disciplines and cultures for their future work in an international environment by combining a digital teaching format with an interdisciplinary, transdisciplinary and intercultural setting for solving sustainability challenges. The innovative moment lies in the digital application of design thinking and the inclusion of intercultural as well as trans- and interdisciplinary perspectives in innovation development processes. In this paper, the concept of the course will be presented in detail and the particularities of a digital implementation of design thinking will be addressed. Subsequently, the potentials and challenges will be reflected and practical advice for integrating design thinking in engineering education will be given.},
  language  = {en}
}
@inproceedings{GoemmelButenwegKob2005,
  author    = {G{\"o}mmel, Andreas and Butenweg, Christoph and Kob, Malte},
  title     = {Towards a complete finite-element model of human phonation: modeling phonatory maneuvers},
  series = {12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...},
  booktitle = {12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...},
  publisher = {Univ., Dep. of Orthodontics},
  address   = {Ulm},
  organization    = {Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields <12, 2005, Ulm>},
  isbn      = {978-3-9806183-8-0},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {en}
}
@inproceedings{BlankeSchmidtGoettscheetal.2022,
  author    = {Blanke, Tobias and Schmidt, Katharina S. and G{\"o}ttsche, Joachim and D{\"o}ring, Bernd and Frisch, J{\´e}r{\^o}me and van Treeck, Christoph},
  title     = {Time series aggregation for energy system design: review and extension of modelling seasonal storages},
  series = {Energy Informatics},
  volume    = {5},
  booktitle = {Energy Informatics},
  number    = {1, Article number: 17},
  editor    = {Weidlich, Anke and Neumann, Dirk and Gust, Gunther and Staudt, Philipp and Sch{\"a}fer, Mirko},
  publisher = {Springer Nature},
  issn      = {2520-8942},
  doi       = {10.1186/s42162-022-00208-5},
  pages     = {1 -- 14},
  year      = {2022},
  abstract  = {Using optimization to design a renewable energy system has become a computationally demanding task as the high temporal fluctuations of demand and supply arise within the considered time series. The aggregation of typical operation periods has become a popular method to reduce effort. These operation periods are modelled independently and cannot interact in most cases. Consequently, seasonal storage is not reproducible. This inability can lead to a significant error, especially for energy systems with a high share of fluctuating renewable energy. The previous paper, "Time series aggregation for energy system design: Modeling seasonal storage", has developed a seasonal storage model to address this issue. Simultaneously, the paper "Optimal design of multi-energy systems with seasonal storage" has developed a different approach. This paper aims to review these models and extend the first model. The extension is a mathematical reformulation to decrease the number of variables and constraints. Furthermore, it aims to reduce the calculation time while achieving the same results.},
  language  = {en}
}
@inproceedings{KernImaniVashianiTimmermanns2021,
  author    = {Kern, Alexander and Imani Vashiani, Anahita and Timmermanns, Tobias},
  title     = {Threat for human beings due to touch voltages and body currents caused by direct lightning strikes in case of non-isolated lightning protection systems using natural components},
  series = {35th International Conference on Lightning Protection (ICLP) and XVI International Symposium on Lightning Protection (SIPDA)},
  booktitle = {35th International Conference on Lightning Protection (ICLP) and XVI International Symposium on Lightning Protection (SIPDA)},
  publisher = {IEEE},
  isbn      = {978-1-6654-2346-5},
  doi       = {10.1109/ICLPandSIPDA54065.2021.9627465},
  pages     = {8 Seiten},
  year      = {2021},
  abstract  = {For typical cases of non-isolated lightning protection systems (LPS) the impulse currents are investigated which may flow through a human body directly touching a structural part of the LPS. Based on a basic LPS model with conventional down-conductors especially the cases of external and internal steel columns and metal fa{\c{c}}ades are considered and compared. Numerical simulations of the line quantities voltages and currents in the time domain are performed with an equivalent circuit of the entire LPS. As a result it can be stated that by increasing the number of conventional down-conductors and external steel columns the threat for a human being can indeed be reduced, but not down to an acceptable limit. In case of internal steel columns used as natural down-conductors the threat can be reduced sufficiently, depending on the low-resistive connection of the steel columns to the lightning equipotential bonding or the earth termination system, resp. If a metal fa{\c{c}}ade is used the threat for human beings touching is usually very low, if the fa{\c{c}}ade is sufficiently interconnected and multiply connected to the lightning equipotential bonding or the earth termination system, resp.},
  language  = {en}
}
@inproceedings{HaissigDoerenStadler1981,
  author    = {Haissig, M. and D{\"o}ren, Horst-Peter and Stadler, P.},
  title     = {The horizontal continuous casting process of steel - a contribution to the economic production of unalloyed, alloyed and high alloyed steel},
  series = {VOEST-Alpine Continuous Casting Conference : 12.-15. 10.1981, Johannes-Keppler-Universit{\"a}t Linz},
  booktitle = {VOEST-Alpine Continuous Casting Conference : 12.-15. 10.1981, Johannes-Keppler-Universit{\"a}t Linz},
  address   = {Linz},
  pages     = {Vortrag 21},
  year      = {1981},
  language  = {en}
}
@inproceedings{Doeren1988,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {The examination of surfaces of cold rolled wire for gas-shielded arc-welding},
  series = {WAI/BISPA joint conference : proceedings. Joint conference of Wire Association International and the British Independent Steel Producers Association (WAI/BISPA) : 26 - 27. 09. 1988, Stratford-upon-Avon},
  booktitle = {WAI/BISPA joint conference : proceedings. Joint conference of Wire Association International and the British Independent Steel Producers Association (WAI/BISPA) : 26 - 27. 09. 1988, Stratford-upon-Avon},
  address   = {Guilford, Conn.},
  organization    = {Wire Association International},
  pages     = {102 -- 112},
  year      = {1988},
  language  = {en}
}
@inproceedings{AnicPenavaGuljasetal.2018,
  author    = {Anic, Filip and Penava, Davorin and Guljas, Ivica and Sarhosis, Vasilis and Abrahamczyk, Lars and Butenweg, Christoph},
  title     = {The Effect of Openings on Out-of-Plane Capacity of Masonry Infilled Reinforced Concrete Frames},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 11},
  year      = {2018},
  language  = {en}
}
@inproceedings{KonradChudobaButenwegetal.2003,
  author    = {Konrad, M. and Chudoba, Rostislav and Butenweg, Christoph and Bruckermann, O.},
  title     = {Textile reinforced concrete. Part II: Multi-level modeling concept},
  series = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke},
  booktitle = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke},
  publisher = {IKM},
  address   = {Weimar},
  organization    = {Internationales Kolloquium {\"u}ber Anwendungen der Informatik und Mathematik in Architektur und Bauwesen <16, 2003, Weimar>},
  pages     = {1 -- 11},
  year      = {2003},
  language  = {en}
}
@inproceedings{ChudobaButenwegPfeiffer2003,
  author    = {Chudoba, Rostislav and Butenweg, Christoph and Pfeiffer, Frank},
  title     = {Textile reinforced concrete. Part I: Process model for collaborative research and development},
  series = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke},
  booktitle = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke},
  publisher = {IKM},
  address   = {Weimar},
  organization    = {Internationales Kolloquium {\"u}ber Anwendungen der Informatik und Mathematik in Architektur und Bauwesen <16, 2003, Weimar>},
  pages     = {1 -- 8},
  year      = {2003},
  language  = {en}
}
@inproceedings{BruessermannDeuster2005,
  author    = {Br{\"u}ssermann, Klaus and Deuster, M.},
  title     = {Temperature measurement to optimise the burning process},
  year      = {2005},
  abstract  = {One of the most important parameters in a burning chamber - in power stations, in waste to energy plants - is the temperature. This temperature is in the range of 700-1500 °C - one of the most advanced measuring methods being the acoustic pyrometry with the possibility of producing temperature mapping in one level of the burning chamber - comparable to computer tomography. The results of these measurements discussed in the presentation can be used - to fulfil the legal requirements in the FRG or in the EU - to equalise the temperature in one level of the burning chamber to optimise the steam production (better efficiency of the plant) and to minimise the production of temperature controlled flue gas components (NO, CO a. o.) - to control the SNCR-process if used.},
  subject      = {Pyrometrie},
  language  = {en}
}
@inproceedings{ChudobaButenwegKuhlmann2002,
  author    = {Chudoba, Rostislav and Butenweg, Christoph and Kuhlmann, Wolfram},
  title     = {Technical information system for collaborative material research},
  series = {Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002]},
  booktitle = {Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002]},
  organization    = {International Conference on Computational Structures Technology <6, 2002, Prag>},
  pages     = {1 -- 11},
  year      = {2002},
  language  = {en}
}
@inproceedings{MahdiDerschSchmitzetal.2022,
  author    = {Mahdi, Zahra and Dersch, J{\"u}rgen and Schmitz, Pascal and Dieckmann, Simon and Caminos, Ricardo Alexander Chico and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Schwager, Christian and Schmitz, Mark and Gielen, Hans and Gedle, Yibekal and B{\"u}scher, Rauno},
  title     = {Technical assessment of Brayton cycle heat pumps for the integration in hybrid PV-CSP power plants},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086269},
  pages     = {11 Seiten},
  year      = {2022},
  abstract  = {The hybridization of Concentrated Solar Power (CSP) and Photovoltaics (PV) systems is a promising approach to reduce costs of solar power plants, while increasing dispatchability and flexibility of power generation. High temperature heat pumps (HT HP) can be utilized to boost the salt temperature in the thermal energy storage (TES) of a Parabolic Trough Collector (PTC) system from 385 °C up to 565 °C. A PV field can supply the power for the HT HP, thus effectively storing the PV power as thermal energy. Besides cost-efficiently storing energy from the PV field, the power block efficiency of the overall system is improved due to the higher steam parameters. This paper presents a technical assessment of Brayton cycle heat pumps to be integrated in hybrid PV-CSP power plants. As a first step, a theoretical analysis was carried out to find the most suitable working fluid. The analysis included the fluids Air, Argon (Ar), Nitrogen (N2) and Carbon dioxide (CO2). N2 has been chosen as the optimal working fluid for the system. After the selection of the ideal working medium, different concepts for the arrangement of a HT HP in a PV-CSP hybrid power plant were developed and simulated in EBSILON®Professional. The concepts were evaluated technically by comparing the number of components required, pressure losses and coefficient of performance (COP).},
  language  = {en}
}
@inproceedings{PieperSchulz2014,
  author    = {Pieper, Martin and Schulz, Silvia},
  title     = {Teaching Simulation Methods with COMSOL Multiphysics},
  organization    = {COMSOL Conference <2014, Cambridge>},
  pages     = {7},
  year      = {2014},
  abstract  = {This paper describes two courses on simulation methods for graduate students: "Simulation Methods" and "Simulation and Optimization in Virtual Engineering" The courses were planned to teach young engineers how to work with simulation software as well as to understand the necessary mathematical background. As simulation software COMSOL is used. The main philosophy was to combine theory and praxis in a way that motivates the students. In addition "soft skills" should be improved. This was achieved by project work as final examination. As underlying didactical principle the ideas of Bloom's revised taxonomy were followed. The paper basically focusses on educational aspects, e.g. how to structure the course, plan the exercises, organize the project work and include practical COMSOL examples.},
  language  = {en}
}