@book{Muehl2014,
  author    = {M{\"u}hl, Thomas},
  title     = {Einf{\"u}hrung in die elektrische Messtechnik : Grundlagen, Messverfahren, Anwendungen. - 4. aktualisierte u. erw. Aufl.},
  edition   = {4., aktualisierte u. erw. Aufl.},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-2063-1 ; 978-3-8348-0899-8},
  pages     = {XI, 320 S.},
  year      = {2014},
  language  = {de}
}
@article{MuellerHirschfeldLambertzetal.2014,
  author    = {M{\"u}ller, Martin and Hirschfeld, Julian and Lambertz, Rita and Schulze Lohoff, Andreas and Lustfeld, Hans and Pfeifer, Heinz and Reißel, Martin},
  title     = {Validation of a novel method for detecting and stabilizing malfunctioning areas in fuel cell stacks},
  series = {Journal of power sources},
  volume    = {272},
  journal   = {Journal of power sources},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2755 (E-Journal); 0378-7753 (Print)},
  doi       = {10.1016/j.jpowsour.2014.08.045},
  pages     = {225 -- 232},
  year      = {2014},
  abstract  = {In this paper a setup for detecting malfunctioning areas of MEAs in fuel cell stacks is described. Malfunctioning areas generate electric cross currents inside bipolar plates. To exploit this we suggest bipolar plates consisting not of two but of three layers. The third one is a highly conducting layer and segmented such that the cross currents move along the segments to the surface of the stack where they can be measured by an inductive sensor. With this information a realistic model can be used to detect the malfunctioning area. Furthermore the third layer will prevent any current inhomogeneity of a malfunctioning cell to spread to neighbouring cells in the stack. In this work the results of measurements in a realistic cell setup will be compared with the results obtained in simulation studies with the same configuration. The basis for the comparison is the reliable characterisation of the electrical properties of the cell components and the implication of these results into the simulation model. The experimental studies will also show the limits in the maximum number of segments, which can be used for a reliable detection of cross currents.},
  language  = {en}
}
@book{MuellerStoeckerLieber2014,
  author    = {M{\"u}ller, Thomas and St{\"o}cker, Ernst E. and Lieber, Bettina},
  title     = {Die Organschaft : K{\"o}rperschaftsteuerrecht, Gewerbesteuerrecht, Umsatzsteuerrecht, Grunderwerbsteuerrecht},
  edition   = {9. Aufl.},
  publisher = {NWB-Verl.},
  address   = {Herne},
  isbn      = {978-3-482-44609-2},
  pages     = {544 S.},
  year      = {2014},
  language  = {de}
}
@article{NachtrodtTietschMostaccietal.2014,
  author    = {Nachtrodt, Frederik and Tietsch, Wolfgang and Mostacci, Domiziano and Scherer, Ulrich W.},
  title     = {Set-up and first operation of a plasma oven for treatment of low level radioactive wastes},
  series = {Nuclear technology and radiation protection},
  volume    = {29},
  journal   = {Nuclear technology and radiation protection},
  number    = {Suppl.},
  publisher = {VINČA Institute of Nuclear Sciences},
  address   = {Belgrad},
  issn      = {1451-3994},
  doi       = {10.2298/NTRP140SS47N},
  pages     = {47 -- 51},
  year      = {2014},
  language  = {en}
}
@book{NebgenPeterson2014,
  author    = {Nebgen, Nikolaus and Peterson, Leif Arne},
  title     = {Holzbau kompakt nach Eurocode 5},
  edition   = {4. Aufl.},
  publisher = {Beuth},
  address   = {Berlin},
  isbn      = {978-3-410-22414-3},
  pages     = {XII, 267 S. : Ill., graph. Darst.},
  year      = {2014},
  language  = {de}
}
@inproceedings{NeugebauerBrutschyMeyeretal.2014,
  author    = {Neugebauer, Georg and Brutschy, Lucas and Meyer, Ulrike and Wetzel, Susanne},
  title     = {Privacy-preserving multi-party reconciliation secure in the malicious model},
  series = {DPM 2013, SETOP 2013: Data Privacy Management and Autonomous Spontaneous Security},
  booktitle = {DPM 2013, SETOP 2013: Data Privacy Management and Autonomous Spontaneous Security},
  editor    = {Garcia-Alfaro, Joaquin and Lioudakis, Georgios and Cuppens-Boulahia, Nora and Foley, Simon and Fitzgerald, William M.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-54567-2 (Print)},
  doi       = {10.1007/978-3-642-54568-9_12},
  pages     = {178 -- 193},
  year      = {2014},
  abstract  = {The problem of fair and privacy-preserving ordered set reconciliation arises in a variety of applications like auctions, e-voting, and appointment reconciliation. While several multi-party protocols have been proposed that solve this problem in the semi-honest model, there are no multi-party protocols that are secure in the malicious model so far. In this paper, we close this gap. Our newly proposed protocols are shown to be secure in the malicious model based on a variety of novel non-interactive zero-knowledge-proofs. We describe the implementation of our protocols and evaluate their performance in comparison to protocols solving the problem in the semi-honest case.},
  language  = {en}
}
@inproceedings{NeumannFerreinKallweitetal.2014,
  author    = {Neumann, Tobias and Ferrein, Alexander and Kallweit, Stephan and Scholl, Ingrid},
  title     = {Towards a mobile mapping robot for underground mines},
  series = {7th Conference of Robotics and Mechatronics : RobMech 2014 : 27th and 28th Nov. 2014, Cape Town},
  booktitle = {7th Conference of Robotics and Mechatronics : RobMech 2014 : 27th and 28th Nov. 2014, Cape Town},
  organization    = {Conference of Robotics and Mechatronics <7, 2014, Cape Town, South Africa>},
  pages     = {1 -- 6},
  year      = {2014},
  language  = {en}
}
@inproceedings{NiedermeierClemensKowalskietal.2014,
  author    = {Niedermeier, H. and Clemens, J. and Kowalski, Julia and Macht, S. and Heinen, D. and Hoffmann, R. and Linder, Peter},
  title     = {Navigation system for a research ice probe for antarctic glaciers},
  series = {IEEE/ION Position, Location and Navigation Symposium (PLANS) ; 5-8 May 2014, Monterey, Calif.},
  booktitle = {IEEE/ION Position, Location and Navigation Symposium (PLANS) ; 5-8 May 2014, Monterey, Calif.},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {Position, Location and Navigation Symposium <2014, Monterey, Calif.>},
  isbn      = {978-1-4799-3319-8},
  pages     = {959 -- 975},
  year      = {2014},
  language  = {en}
}
@incollection{NiemuellerEwertReuteretal.2014,
  author    = {Niem{\"u}ller, Tim and Ewert, Daniel and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {RoboCup logistics league sponsored by festo: A competitive factory automation testbed},
  series = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)},
  booktitle = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)},
  publisher = {Springer},
  address   = {Berlin},
  organization    = {RoboCup International Symposium <17, 2013, Eindhoven>},
  isbn      = {978-3-662-44467-2 (Print) 978-3-662-44468-9 (Online)},
  pages     = {336 -- 347},
  year      = {2014},
  abstract  = {A new trend in automation is to deploy so-called cyber-physical systems (CPS) which combine computation with physical processes. The novel RoboCup Logistics League Sponsored by Festo (LLSF) aims at such CPS logistic scenarios in an automation setting. A team of robots has to produce products from a number of semi-finished products which they have to machine during the game. Different production plans are possible and the robots need to recycle scrap byproducts. This way, the LLSF is a very interesting league offering a number of challenging research questions for planning, coordination, or communication in an application-driven scenario. In this paper, we outline the objectives of the LLSF and present steps for developing the league further towards a benchmark for logistics scenarios for CPS. As a major milestone we present the new automated referee system which helps in governing the game play as well as keeping track of the scored points in a very complex factory scenario.},
  language  = {en}
}
@misc{NoetzoldBragardFinketal.2014,
  author    = {N{\"o}tzold, K. and Bragard, Michael and Fink, K. and Griessel, R. and Wegener, R.},
  title     = {Cascaded H-bridge converter with transformer based cell power balancing in each voltage level : [Patentschrift]},
  publisher = {Europ{\"a}isches Patentamt / United States Patent and Trademark Office [u.a.]},
  address   = {Den Haag / Alexandria, VA},
  pages     = {16 S. : graph. Darst.},
  year      = {2014},
  language  = {en}
}
@article{OberlaenderKirchnerBoyenetal.2014,
  author    = {Oberl{\"a}nder, Jan and Kirchner, Patrick and Boyen, Hans-Gerd and Sch{\"o}ning, Michael Josef},
  title     = {Detection of hydrogen peroxide vapor by use of manganese(IV) oxide as catalyst for calorimetric gas sensors},
  series = {Physica status solidi A: Applications and materials science},
  volume    = {211},
  journal   = {Physica status solidi A: Applications and materials science},
  number    = {6},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)},
  doi       = {10.1002/pssa.201330359},
  pages     = {1372 -- 1376},
  year      = {2014},
  abstract  = {In this work, the catalyst manganese(IV) oxide (MnO2), of calorimetric gas sensors (to monitor the sterilization agent vaporized hydrogen peroxide) has been investigated in more detail. Chemical analyses by means of X-ray-induced photoelectron spectroscopy have been performed to unravel the surface chemistry prior and after exposure to hydrogen peroxide vapor at elevated temperature, as applied in the sterilization processes of beverage cartons. The surface characterization reveals a change in oxidation states of the metal oxide catalyst after exposure to hydrogen peroxide. Additionally, a cleaning effect of the catalyst, which itself is attached to the sensor surface by means of a polymer interlayer, could be observed.},
  language  = {en}
}
@inproceedings{OberlaenderKirchnerKeusgenetal.2014,
  author    = {Oberl{\"a}nder, Jan and Kirchner, Patrick and Keusgen, M. and Sch{\"o}ning, Michael Josef},
  title     = {Flexible polyimide-based calorimetric gas sensors for monitoring hy-drogen peroxide in sterilisation processes of aseptic filling machines},
  series = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  booktitle = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  publisher = {VDE-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  isbn      = {978-3-8007-3622-5},
  pages     = {1 -- 4},
  year      = {2014},
  language  = {en}
}
@inproceedings{OertelBung2014,
  author    = {Oertel, Mario and Bung, Daniel Bernhard},
  title     = {Numerische Str{\"o}mungssimulation von Fließgew{\"a}ssern - Wo stehen wir und was werden wir im Laufe der n{\"a}chsten Jahre erreichen?},
  series = {Simulationsverfahren und Modelle f{\"u}r Wasserbau und Wasserwirtschaft = Simulation techniques and models for hydraulic engineering and water management / 37. Dresdner Wasserbaukolloquium 2014, 13. - 14. M{\"a}rz 2014. (Dresdner wasserbauliche Mitteilungen ; H. 50)},
  booktitle = {Simulationsverfahren und Modelle f{\"u}r Wasserbau und Wasserwirtschaft = Simulation techniques and models for hydraulic engineering and water management / 37. Dresdner Wasserbaukolloquium 2014, 13. - 14. M{\"a}rz 2014. (Dresdner wasserbauliche Mitteilungen ; H. 50)},
  organization    = {Dresdner Wasserbaukolloquium <37, 2014>},
  isbn      = {978-3-86780-349-6},
  pages     = {19 -- 30},
  year      = {2014},
  language  = {de}
}
@article{Olbertz2014,
  author    = {Olbertz, Klaus},
  title     = {Der neue gesetzliche Mindestlohn - was gilt und was Unternehmen k{\"u}nftig beachten m{\"u}ssen},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {521 -- 524},
  year      = {2014},
  abstract  = {Ab dem 1.1.2015 ist es soweit: Deutschland erh{\"a}lt einen fl{\"a}chendeckenden und weitgehend branchenunabh{\"a}ngigen gesetzlichen Mindestlohn. Danach haben grunds{\"a}tzlich alle abh{\"a}ngig besch{\"a}ftigten Arbeitnehmer einen Anspruch auf eine Entlohnung von wenigstens 8,50 EUR brutto je Arbeitsstunde. Die Auswirkungen d{\"u}rften enorm sein. Das Bundesministerium f{\"u}r Arbeit und Soziales geht jedenfalls davon aus, dass aufgrund der Einf{\"u}hrung des gesetzlichen Mindestlohns mehrere Millionen Besch{\"a}ftigte einen h{\"o}heren Lohn beanspruchen k{\"o}nnen. Der nachfolgende Beitrag gibt einen {\"U}berblick {\"u}ber die wesentlichen Inhalte des gesetzlichen Mindestlohns und Hinweise f{\"u}r Anwendungsprobleme in der betrieblichen Praxis.},
  language  = {de}
}
@misc{Olbertz2014,
  author    = {Olbertz, Klaus},
  title     = {Arbeitszeitbetrug rechtfertigt fristlose K{\"u}ndigung auch bei langer Betriebszugeh{\"o}rigkeit},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {465 -- 465},
  year      = {2014},
  language  = {de}
}
@article{Olbertz2014,
  author    = {Olbertz, Klaus},
  title     = {Gestaltung des Anstellungsvertrags - Der Compliance-Beauftragte},
  series = {Arbeit und Arbeitsrecht : AuA},
  journal   = {Arbeit und Arbeitsrecht : AuA},
  number    = {7},
  publisher = {Huss Medien},
  address   = {Berlin},
  issn      = {0323-4568},
  pages     = {400 -- 403},
  year      = {2014},
  abstract  = {Ein Compliance-Beauftragter soll daf{\"u}r Sorge tragen, dass aus dem Unternehmen heraus keine Rechtsverletzungen begangen werden. Aber welche rechtlichen Notwendigkeiten und M{\"o}glichkeiten resultieren daraus f{\"u}r die Gestaltung des Anstellungsvertrags?},
  language  = {de}
}
@misc{Olbertz2014,
  author    = {Olbertz, Klaus},
  title     = {Vorbesch{\"a}ftigungszeiten als Leiharbeitnehmer z{\"a}hlen f{\"u}r K{\"u}ndigungsschutz grunds{\"a}tzlich nicht mit},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {423 -- 423},
  year      = {2014},
  language  = {de}
}
@misc{Olbertz2014,
  author    = {Olbertz, Klaus},
  title     = {Kein Anspruch auf Tarifgehaltserh{\"o}hungen bei K{\"u}ndigung des in Bezug genommenen Anerkennungstarifvertrags},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {377 -- 377},
  year      = {2014},
  language  = {de}
}
@misc{Olbertz2014,
  author    = {Olbertz, Klaus},
  title     = {Arbeitnehmereigenschaft des mitarbeitenden Gesellschafters einer GmbH},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {532 -- 532},
  year      = {2014},
  language  = {de}
}
@article{Olbertz2014,
  author    = {Olbertz, Klaus},
  title     = {Die arbeitsrechtliche Stellung des Prokuristen - Handelsrechtlicher Kompetenzzuwachs mit arbeitsrechtlichen Konsequenzen},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {21},
  publisher = {NWB-Verlag},
  address   = {Herne},
  issn      = {1860-9449},
  pages     = {1591 -- 1596},
  year      = {2014},
  abstract  = {Die Besch{\"a}ftigung von Prokuristen ist g{\"a}ngige betriebliche Praxis. Unternehmen stehen dabei immer wieder vor der Frage, ob und welche Arbeitnehmer sie zu Prokuristen bestellen sollen. Nicht selten bleiben hierbei die arbeitsrechtlichen Konsequenzen, die mit der Bestellung eines Arbeitnehmers zum Prokuristen einhergehen k{\"o}nnen, unber{\"u}cksichtigt, wie diverse Gerichtsentscheidungen zeigen. Dieser Beitrag soll einen {\"U}berblick {\"u}ber die arbeitsrechtlichen Folgen bei der Besch{\"a}ftigung von Prokuristen geben und der betrieblichen Praxis somit gleichzeitig als Entscheidungshilfe dienen, wenn es um das Ob und Wie der m{\"o}glichen Bestellung eines Arbeitnehmers zum Prokuristen geht.},
  language  = {de}
}