@masterthesis{Gros2024, type = {Bachelor Thesis}, author = {Gros, Isabella}, title = {Depressed Furniture : eine abstrakte {\"U}bersetzung von Depressionen in M{\"o}blierung}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {367 Seiten}, year = {2024}, abstract = {Depressed Furniture ist eine abstrakte {\"U}bersetzung von Depressionen in M{\"o}blierung. Es handelt sich um eine Rauminstallation von f{\"u}nf Leuchten, die der Erkrankung in einem un{\"u}blichen Kontext eine Plattform gibt. Dadurch stellt das Projekt eine Schnittstelle zwischen Kunst, Design und Gesellschaft dar. Jede Leuchte verk{\"o}rpert eine Empfindung, mit der sich ein Großteil der Betroffenen identifizieren kann. Es wird Bewusstsein f{\"u}r die Komplexit{\"a}t der Krankheit geschaffen und das Tabu um mentale Krankheiten gebrochen. Neben der Regular Collection k{\"o}nnen auch Tischvarianten (Compact Collection) erworben werden. Depressed Furniture zeigt, dass es durchaus m{\"o}glich ist, eine unsch{\"o}ne Thematik zu abstrahieren und ihr neutral zu begegnen. Es verdeutlicht, wie Design dazu beitragen kann, sensible Themen auf kreative Weise zu kommunizieren.}, language = {de} } @masterthesis{Guth2022, type = {Bachelor Thesis}, author = {Guth, Katharina}, title = {aco : eine digitale Anwendung zur Verbesserung der Lebensqualit{\"a}t von Neurodermitis-Patient:innen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {267 Seiten}, year = {2022}, abstract = {Neurodermitis hat in den letzten Jahrzehnten deutlich zugenommen. Etwa 10 bis 15 Prozent der Kinder und 2,5 bis 3,5 Prozent der Erwachsenen sind davon betroffen. F{\"u}r sie stellen Auswirkungen der Hautkrankheit auf K{\"o}rper und Psyche eine enorme Einschr{\"a}nkung der Lebensqualit{\"a}t dar. Die App „aco" m{\"o}chte Neurodermitis-Patient:Innen dabei unterst{\"u}tzen, ihre Behandlung selbst in die Hand zu nehmen. Eine ganzheitliche Therapie umfasst eben nicht nur Fachpersonen, sondern auch Patient:Innen selbst. Durch eine regelm{\"a}ßige Dokumentation erm{\"o}glicht die Anwendung eine aktive Auseinandersetzung mit der Krankheit. Triggerfaktoren werden ausgewertet und es wird Wissen {\"u}ber Behandlungsm{\"o}glichkeiten vermittelt. Zudem wird ein Austausch erm{\"o}glicht, der emotionale und praktische Unterst{\"u}tzung bieten soll. Damit m{\"o}chte „aco" Betroffenen eine M{\"o}glichkeit geben, das Ruder selbst in die Hand zu nehmen und leistet damit einen wichtigen Beitrag zur Therapie von Neurodermitis.}, language = {de} } @masterthesis{Gutsche2021, type = {Bachelor Thesis}, author = {Gutsche, Niklas Daniel Martin}, title = {1944: Vom Alltag zum Albtraum - nach einer wahren Begebenheit}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {63 Seiten}, year = {2021}, abstract = {Nach einer wahren Begebenheit nimmt der Kurzfilm den Zuschauer mit in das Erlebnis zweier Kinder eines Luftangriffes w{\"a}hrend des Zweiten Weltkriegs: "Es ist 1944, in Deutschland w{\"u}tet der Zweite Weltkrieg. Horst und Elli erledigen gerade mit ihrer Tante die Eink{\"a}ufe, als pl{\"o}tzlich die Sirenen aufheulen. Die Drei rennen auf schnellstem Weg zur{\"u}ck zum Dorf, um sich in den sicheren Luftschutzkeller zu fl{\"u}chten. Doch in der Hektik werden die Kinder von ihrer Tante getrennt und als die ersten Bomben fallen, sind die Beiden noch lange nicht am Bunker angelangt. Geistesgegenw{\"a}rtig reagiert Horst und rettet so ihrer beider Leben. Bevor weitere Bomben einschlagen, erreichen die Kinder endlich den sicheren Luftschutzkeller."}, language = {de} } @article{GoettenFingerHavermannetal.2021, author = {G{\"o}tten, Falk and Finger, Felix and Havermann, Marc and Braun, Carsten and Marino, M. and Bil, C.}, title = {Full configuration drag estimation of short-to-medium range fixed-wing UAVs and its impact on initial sizing optimization}, series = {CEAS Aeronautical Journal}, volume = {12}, journal = {CEAS Aeronautical Journal}, publisher = {Springer}, address = {Berlin}, issn = {1869-5590 (Online)}, doi = {10.1007/s13272-021-00522-w}, pages = {589 -- 603}, year = {2021}, abstract = {The paper presents the derivation of a new equivalent skin friction coefficient for estimating the parasitic drag of short-to-medium range fixed-wing unmanned aircraft. The new coefficient is derived from an aerodynamic analysis of ten different unmanned aircraft used for surveillance, reconnaissance, and search and rescue missions. The aircraft is simulated using a validated unsteady Reynolds-averaged Navier Stokes approach. The UAV's parasitic drag is significantly influenced by the presence of miscellaneous components like fixed landing gears or electro-optical sensor turrets. These components are responsible for almost half of an unmanned aircraft's total parasitic drag. The new equivalent skin friction coefficient accounts for these effects and is significantly higher compared to other aircraft categories. It is used to initially size an unmanned aircraft for a typical reconnaissance mission. The improved parasitic drag estimation yields a much heavier unmanned aircraft when compared to the sizing results using available drag data of manned aircraft.}, language = {en} } @inproceedings{GoettscheKornAmato2015, author = {G{\"o}ttsche, Joachim and Korn, Michael and Amato, Alexandre}, title = {The Passivhaus concept for the Arabian Peninsula - An energetic-economical evaluation considering the thermal comfort}, series = {QScience Proceedings: Vol 2015}, booktitle = {QScience Proceedings: Vol 2015}, doi = {10.5339/qproc.2015.qgbc.38}, pages = {8 Seiten}, year = {2015}, abstract = {The Passivhaus building standard is a concept developed for the realization of energy-efficient and economical buildings with a simultaneous high utilization comfort under European climate conditions. Major elements of the Passivhaus concept are a high thermal insulation of the external walls, the use of heat and/or solar shading glazing as well as an airtight building envelope in combination with energy-efficient technical building installations and heating or cooling generators, such as an efficient energy-recovery in the building air-conditioning. The objective of this research project is the inquiry to determine the parameters or constraints under which the Passivhaus concept can be implemented under the arid climate conditions in the Arabian Peninsula to achieve an energy-efficient and economical building with high utilization comfort. In cooperation between the Qatar Green Building Council (QGBC), Barwa Real Estate (BRE) and Kahramaa the first Passivhaus was constructed in Qatar and on the Arabian Peninsula in 2013. The Solar-Institut J{\"u}lich of Aachen University of Applied Science supports the Qatar Green Building Council with a dynamic building and equipment simulation of the Passivhaus and the neighbouring reference building. This includes simulation studies with different component configurations for the building envelope and different control strategies for heating or cooling systems as well as the air conditioning of buildings to find an energetic-economical optimum. Part of these analyses is the evaluation of the energy efficiency of the used energy recovery system in the Passivhaus air-conditioning and identification of possible energy-saving effects by the use of a bypass function integrated in the heat exchanger. In this way it is expected that on an annual basis the complete electricity demand of the building can be covered by the roof-integrated PV generator.}, language = {en} } @inproceedings{GoettscheRoether2014, author = {G{\"o}ttsche, Joachim and R{\"o}ther, Sascha}, title = {Science College Overbach - Innovatives Bildungszentrum in J{\"u}lich-Barmen}, series = {18. Internationale Passivhaustagung, Aachen, April 2014}, booktitle = {18. Internationale Passivhaustagung, Aachen, April 2014}, pages = {6 Seiten}, year = {2014}, abstract = {Preprint der Autoren}, language = {de} } @masterthesis{Goetz2023, type = {Bachelor Thesis}, author = {G{\"o}tz, Daniela}, title = {Entwicklung eines Erscheinungsbildes f{\"u}r das Start-up-Unternehmen CoArea}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {93 Seiten}, year = {2023}, abstract = {Diese Bachelorarbeit befasst sich mit dem Corporate Design des aufstrebenden Startups "CoArea". Seine innovative Plattform vermittelt ungenutzte Fl{\"a}chen im urbanen Raum und bringt Fl{\"a}chenbedarf und -bereitstellung intelligent zusammen. Die Arbeit untersucht, wie das Erscheinungsbild von CoArea das Unternehmen als modern, nachhaltig und ressourcenschonend positioniert. Durch das neu gestaltete Corporate Design wird diese besondere Herangehensweise zur effizienten Nutzung begrenzter Ressourcen unserer Umwelt durch CoArea deutlich und nach außen getragen. CoArea strebt danach, die positive Entwicklung der St{\"a}dte voranzutreiben und die soziale Nachhaltigkeit durch den Austausch und die Interaktion zwischen verschiedenen Menschen und Gemeinschaften zu f{\"o}rdern.}, language = {de} } @article{HaegerJolmesOyenetal.2024, author = {Haeger, Gerrit and Jolmes, Tristan and Oyen, Sven and Jaeger, Karl-Erich and Bongaerts, Johannes and Sch{\"o}rken, Ulrich and Siegert, Petra}, title = {Novel recombinant aminoacylase from Paraburkholderia monticola capable of N-acyl-amino acid synthesis}, series = {Applied Microbiology and Biotechnology}, journal = {Applied Microbiology and Biotechnology}, number = {108}, publisher = {Springer}, address = {Berlin}, issn = {1432-0614}, doi = {10.1007/s00253-023-12868-8}, pages = {14 Seiten}, year = {2024}, abstract = {N-Acyl-amino acids can act as mild biobased surfactants, which are used, e.g., in baby shampoos. However, their chemical synthesis needs acyl chlorides and does not meet sustainability criteria. Thus, the identification of biocatalysts to develop greener synthesis routes is desirable. We describe a novel aminoacylase from Paraburkholderia monticola DSM 100849 (PmAcy) which was identified, cloned, and evaluated for its N-acyl-amino acid synthesis potential. Soluble protein was obtained by expression in lactose autoinduction medium and co-expression of molecular chaperones GroEL/S. Strep-tag affinity purification enriched the enzyme 16-fold and yielded 15 mg pure enzyme from 100 mL of culture. Biochemical characterization revealed that PmAcy possesses beneficial traits for industrial application like high temperature and pH-stability. A heat activation of PmAcy was observed upon incubation at temperatures up to 80 °C. Hydrolytic activity of PmAcy was detected with several N-acyl-amino acids as substrates and exhibited the highest conversion rate of 773 U/mg with N-lauroyl-L-alanine at 75 °C. The enzyme preferred long-chain acyl-amino-acids and displayed hardly any activity with acetyl-amino acids. PmAcy was also capable of N-acyl-amino acid synthesis with good conversion rates. The best synthesis results were obtained with the cationic L-amino acids L-arginine and L-lysine as well as with L-leucine and L-phenylalanine. Exemplarily, L-phenylalanine was acylated with fatty acids of chain lengths from C8 to C18 with conversion rates of up to 75\%. N-lauroyl-L-phenylalanine was purified by precipitation, and the structure of the reaction product was verified by LC-MS and NMR.}, language = {en} } @article{HaegerProbstJaegeretal.2023, author = {Haeger, Gerrit and Probst, Johanna and Jaeger, Karl-Erich and Bongaerts, Johannes and Siegert, Petra}, title = {Novel aminoacylases from Streptomyces griseus DSM 40236 and their recombinant production in Streptomyces lividans}, series = {FEBS Open Bio}, volume = {13}, journal = {FEBS Open Bio}, number = {12}, publisher = {Wiley}, address = {Hoboken, NJ}, issn = {2211-5463}, doi = {10.1002/2211-5463.13723}, pages = {2224 -- 2238}, year = {2023}, abstract = {Amino acid-based surfactants are valuable compounds for cosmetic formulations. The chemical synthesis of acyl-amino acids is conventionally performed by the Schotten-Baumann reaction using fatty acyl chlorides, but aminoacylases have also been investigated for use in biocatalytic synthesis with free fatty acids. Aminoacylases and their properties are diverse; they belong to different peptidase families and show differences in substrate specificity and biocatalytic potential. Bacterial aminoacylases capable of synthesis have been isolated from Burkholderia, Mycolicibacterium, and Streptomyces. Although several proteases and peptidases from S. griseus have been described, no aminoacylases from this species have been identified yet. In this study, we investigated two novel enzymes produced by S. griseus DSM 40236ᵀ . We identified and cloned the respective genes and recombinantly expressed an α-aminoacylase (EC 3.5.1.14), designated SgAA, and an ε-lysine acylase (EC 3.5.1.17), designated SgELA, in S. lividans TK23. The purified aminoacylase SgAA was biochemically characterized, focusing on its hydrolytic activity to determine temperature- and pH optima and stabilities. The aminoacylase could hydrolyze various acetyl-amino acids at the Nα -position with a broad specificity regarding the sidechain. Substrates with longer acyl chains, like lauroyl-amino acids, were hydrolyzed to a lesser extent. Purified aminoacylase SgELA specific for the hydrolysis of Nε -acetyl-L-lysine was unstable and lost its enzymatic activity upon storage for a longer period but could initially be characterized. The pH optimum of SgELA was pH 8.0. While synthesis of acyl-amino acids was not observed with SgELA, SgAA catalyzed the synthesis of lauroyl-methionine.}, language = {en} } @article{HaegerWirgesTanzmannetal.2023, author = {Haeger, Gerrit and Wirges, Jessika and Tanzmann, Nicole and Oyen, Sven and Jolmes, Tristan and Jaeger, Karl-Erich and Sch{\"o}rken, Ulrich and Bongaerts, Johannes and Siegert, Petra}, title = {Chaperone assisted recombinant expression of a mycobacterial aminoacylase in Vibrio natriegens and Escherichia coli capable of N-lauroyl-L-amino acid synthesis}, series = {Microbial Cell Factories}, journal = {Microbial Cell Factories}, number = {22}, publisher = {Springer Nature}, issn = {1475-2859}, doi = {10.1186/s12934-023-02079-1}, pages = {Article number: 77 (2023)}, year = {2023}, abstract = {Background Aminoacylases are highly promising enzymes for the green synthesis of acyl-amino acids, potentially replacing the environmentally harmful Schotten-Baumann reaction. Long-chain acyl-amino acids can serve as strong surfactants and emulsifiers, with application in cosmetic industries. Heterologous expression of these enzymes, however, is often hampered, limiting their use in industrial processes. Results We identified a novel mycobacterial aminoacylase gene from Mycolicibacterium smegmatis MKD 8, cloned and expressed it in Escherichia coli and Vibrio natriegens using the T7 overexpression system. The recombinant enzyme was prone to aggregate as inclusion bodies, and while V. natriegens Vmax™ could produce soluble aminoacylase upon induction with isopropyl β-d-1-thiogalactopyranoside (IPTG), E. coli BL21 (DE3) needed autoinduction with lactose to produce soluble recombinant protein. We successfully conducted a chaperone co-expression study in both organisms to further enhance aminoacylase production and found that overexpression of chaperones GroEL/S enhanced aminoacylase activity in the cell-free extract 1.8-fold in V. natriegens and E. coli. Eventually, E. coli ArcticExpress™ (DE3), which co-expresses cold-adapted chaperonins Cpn60/10 from Oleispira antarctica, cultivated at 12 °C, rendered the most suitable expression system for this aminoacylase and exhibited twice the aminoacylase activity in the cell-free extract compared to E. coli BL21 (DE3) with GroEL/S co-expression at 20 °C. The purified aminoacylase was characterized based on hydrolytic activities, being most stable and active at pH 7.0, with a maximum activity at 70 °C, and stability at 40 °C and pH 7.0 for 5 days. The aminoacylase strongly prefers short-chain acyl-amino acids with smaller, hydrophobic amino acid residues. Several long-chain amino acids were fairly accepted in hydrolysis as well, especially N-lauroyl-L-methionine. To initially evaluate the relevance of this aminoacylase for the synthesis of N-acyl-amino acids, we demonstrated that lauroyl-methionine can be synthesized from lauric acid and methionine in an aqueous system. Conclusion Our results suggest that the recombinant enzyme is well suited for synthesis reactions and will thus be further investigated.}, language = {en} } @techreport{HagemannCardinalGartzenetal.1998, author = {Hagemann, Hans-J{\"u}rgen and Cardinal, Peter and Gartzen, Johannes and K{\"o}hler, Bernd and Petschke, U. and Reißmann, G{\"u}nter}, title = {Laser-Mikrostrukturierung von BaTiO3 Gr{\"u}nfolien und Keramiken : Abschlußbericht ; gef{\"o}rdert mit Mitteln aud dem Programm "Anwendungsorientierte Forschung und Entwicklung an Fachhochschulen" des Bundesministeriums f{\"u}r Bildung, Wissenschaft, Forschung}, year = {1998}, abstract = {An BaTiO3 Keramik als Modellsubstanz und mit Nd:YAG- und Excimer-Lasern wurde die Mikrostrukturierung von Gr{\"u}nk{\"o}rperpreßlingen, deren Schrumpfungsverhalten beim Sintern und die Mikrostrukturierung von gesinterten Keramiken untersucht. F{\"u}r die bessere Vergleichbarkeit wurden alle keramischen Folien, Preßlinge und Sinterwerkstoffe im Rahmen des Projektes hergestellt. Die Nd:YAG Laserbearbeitung erfolgte mit einem Rasterverfahren, bei dem der fokussierte Strahl mit Hilfe eines Scanners und eines Umlenkspiegels entlang der Bearbeitungskontur gef{\"u}hrt wurde. Bei der Excimer Laserbearbeitung wurden die Strukturen ohne Relativbewegung zwischen Strahlquelle und Bearbeitungsobjekt durch die Abbildung einer Maske erzeugt. Mit dem Nd:YAG Laser (Wellenl{\"a}nge 1,06 µ m) war eine abtragende Bearbeitung nur bei den Gr{\"u}nk{\"o}rpern, nicht aber bei den gesinterten Keramiken m{\"o}glich. Mit dem Excimer Laser (Wellenl{\"a}nge 248 nm) konnten dagegen sowohl Gr{\"u}nk{\"o}rper als auch gesinterte Keramiken strukturiert werden. Wenn die Genauigkeitsanforderungen nicht unter ± 10 µm liegen, die Bearbeitungskonturen m{\"o}glichst geradlinig sind und der Anteil der zu bearbeitenden Fl{\"a}che klein ist, kann mit Nd:YAG-Lasern eine effiziente Mikrostukturierung von keramischen Gr{\"u}nk{\"o}rpern durchgef{\"u}hrt werden. Strukturierte Gr{\"u}nk{\"o}rper k{\"o}nnen reproduzierbar und unverzerrt zu keramischen Bauteilen gesintert werden. Mit Excimer-Lasern wird eine h{\"o}here Genauigkeit und Qualit{\"a}t bei der Bearbeitung von Gr{\"u}nk{\"o}rpern und Keramiken erreicht. Die Bearbeitungseffizienz l{\"a}sst sich durch eine hohe Pulswiederholfrequenz und durch die simultane Bearbeitung großer Fl{\"a}chen steigern. Das f{\"u}r Excimer-Laserstrahlung zweckm{\"a}ßige Abbildungsverfahren hat besondere Vorteile, wenn ein fl{\"a}chiger Abtrag mit komplexen Strukturen verwirklicht werden soll, wobei Toleranzen und Reproduzierbarkeiten von besser als ± 5 µm realisiert werden konnten. Die Mikrostrukturierung mit Excimer-Lasern ist an Gr{\"u}nk{\"o}rpern und an gebrannten Keramiken gleichermaßen m{\"o}glich. Die Abtragsraten liegen bei Gr{\"u}nk{\"o}rpern mit 0,2 µm pro Puls zwar um ca. 50\% h{\"o}her als bei Keramiken, es ist jedoch zweifelhaft, ob dieser Vorteil den gr{\"o}ßeren prozeßtechnischen Aufwand bei der Bearbeitung von Gr{\"u}nk{\"o}rpern rechtfertigen kann.}, subject = {Keramischer Werkstoff}, language = {de} } @techreport{HagemannHegerHemmeetal.2004, author = {Hagemann, Hans-J{\"u}rgen and Heger, Michael and Hemme, Heinrich and Samm, Doris and Schmitz, G{\"u}nter}, title = {Entwicklung und Evaluation interaktiver, multimedialer Lernsoftware f{\"u}r technische und physikalische Praktika in Ingenieurstudieng{\"a}ngen: INGMEDIA ; Projektlaufzeit: 01. Apr. 2001 - 31. Dez. 2003 / FH Aachen. Projektleiter: Hans-J{\"u}rgen Hagemann}, year = {2004}, abstract = {Im Projekt INGMEDIA ist die Lernform "Praktikum" zu einer selbst bestimmten Lernumgebung weiterentwickelt worden. Vielf{\"a}ltige Kontextangebote bieten individuelle Lerneinstiegsm{\"o}glichkeiten und aktivieren selbstgesteuertes Lernen. Praktika aus drei Bereichen des Ingenieurstudiums, "physikalische Grundlagenpraktika", "Telematiklabore f{\"u}r Elektronik" in der Studienmitte und "virtuelle Technologiepraktika" f{\"u}r Fortgeschrittene , wurden mit Hilfe der Neuen Medien umgestaltet, erprobt und evaluiert. Alle Lern- und Praktikumseinheiten k{\"o}nnen mit Standard-Internet-Browsern {\"u}ber die INGMEDIA-Lernumgebung (ILIAS Open source) benutzt werden. F{\"u}r Lehrende wird die Plattform durch ein komfortables Offline-Autorensystem erg{\"a}nzt, mit dem mulitmediale Lern- und Praktikumseinheiten ohne spezielle Programmierkenntnisse erstellt und automatisch in die Datenbank der ILIAS Lernplattform importiert werden k{\"o}nnen. Die weiterentwickelten Praktikumseinheiten werden seit dem Wintersemester 2002/03 im regul{\"a}ren Lehrbetrieb eingesetzt und formativ evaluiert. Bei den Erprobungen der hypermedialen Lerneinheiten in physikalischen Grundpraktika sch{\"a}tzen die Lernenden den Stand ihrer Vorbereitung als befriedigend ein, die Praktikumsbetreuer konstatierten eine merkliche Verbesserung des Wissensstandes. Die Mehrheit der Studierenden begr{\"u}ßte vor allem die durch die Telematik angebotene gr{\"o}ßere Freiheit eines zeit- und ortsunabh{\"a}ngigen Lernens und der eigenen Lernorganisation. Das virtuelle Technologie-Praktikum: "Sensor-Fertigung" erm{\"o}glicht die Neukonzeption einer industrienahen Ausbildung von Ingenieuren in innovativen Technologien und hat sich bereits bestens bew{\"a}hrt. Die empirischen Befunde {\"u}ber alle im INGMEDIA-Projekt evaluierten Praktika weisen darauf hin, dass Akzeptanz und Lernerfolg beim Einsatz neuer Medien umso deutlicher sichtbar werden je gr{\"o}ßer die Selbstlern- und Medienkompetenzen der Studierenden sind.}, subject = {Hochschuldidaktik}, language = {de} } @article{HagenkampBlankeDoering2021, author = {Hagenkamp, Markus and Blanke, Tobias and D{\"o}ring, Bernd}, title = {Thermoelectric building temperature control: a potential assessment}, series = {International Journal of Energy and Environmental Engineering}, volume = {13}, journal = {International Journal of Energy and Environmental Engineering}, publisher = {Springer}, address = {Berlin}, doi = {10.1007/s40095-021-00424-x}, pages = {241 -- 254}, year = {2021}, abstract = {This study focuses on thermoelectric elements (TEE) as an alternative for room temperature control. TEE are semi-conductor devices that can provide heating and cooling via a heat pump effect without direct noise emissions and no refrigerant use. An efficiency evaluation of the optimal operating mode is carried out for different numbers of TEE, ambient temperatures, and heating loads. The influence of an additional heat recovery unit on system efficiency and an unevenly distributed heating demand are examined. The results show that TEE can provide heat at a coefficient of performance (COP) greater than one especially for small heating demands and high ambient temperatures. The efficiency increases with the number of elements in the system and is subject to economies of scale. The best COP exceeds six at optimal operating conditions. An additional heat recovery unit proves beneficial for low ambient temperatures and systems with few TEE. It makes COPs above one possible at ambient temperatures below 0 ∘C. The effect increases efficiency by maximal 0.81 (from 1.90 to 2.71) at ambient temperature 5 K below room temperature and heating demand Q˙h=100W but is subject to diseconomies of scale. Thermoelectric technology is a valuable option for electricity-based heat supply and can provide cooling and ventilation functions. A careful system design as well as an additional heat recovery unit significantly benefits the performance. This makes TEE superior to direct current heating systems and competitive to heat pumps for small scale applications with focus on avoiding noise and harmful refrigerants.}, language = {en} } @masterthesis{Halstrick2021, type = {Bachelor Thesis}, author = {Halstrick, Anna-Marie}, title = {Generation Pro Impfen: die Gesellschaft zum Impfen animieren. Eine Aufkl{\"a}rungskampagne f{\"u}r eine h{\"o}here Impfbereitschaft.}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {171 Seiten}, year = {2021}, abstract = {Jeder hat schon etwas vom Impfen geh{\"o}rt, trotzdem wird es von vielen vernachl{\"a}ssigt. Das Thema Impfen hat besonders im vergangenen Jahr an Relevanz gewonnen. Vor allem durch die Corona-Pandemie wird der Menschheit bewusst, welch wichtige Bedeutung ein Impfstoff hat. Doch auch abgesehen von der Impfung gegen Covid-19 sind Impfungen wichtig f{\"u}r unser aller Gesundheit. Viele lebenswichtige Impfungen werden vernachl{\"a}ssigt oder sind in der {\"o}ffentlichen Wahrnehmung weniger pr{\"a}sent. Genau das soll die Kampagne verhindern. Das Ziel ist es, Jugendliche und junge Erwachsene auf das Thema aufmerksam zu machen. Die Kampagne soll zeigen, dass schon ein kleiner Piekser Leben retten kann. Gleichzeitig bietet sie auch die M{\"o}glichkeit, den Aufruf direkt umzusetzen. Lokale und terminbezogene Veranstaltungen helfen dabei. Dieses Projekt versucht durch eine Info-Tour, der Unwissenheit {\"u}ber Impfungen entgegenzuwirken.}, language = {de} } @article{HammerQuitterMayntzetal.2023, author = {Hammer, Thorben and Quitter, Julius and Mayntz, Joscha and Bauschat, J.-Michael and Dahmann, Peter and G{\"o}tten, Falk and Hille, Sebastian and Stumpf, Eike}, title = {Free fall drag estimation of small-scale multirotor unmanned aircraft systems using computational fluid dynamics and wind tunnel experiments}, series = {CEAS Aeronautical Journal}, journal = {CEAS Aeronautical Journal}, publisher = {Springer}, address = {Wien}, issn = {1869-5590 (Online)}, doi = {10.1007/s13272-023-00702-w}, pages = {14 Seiten}, year = {2023}, abstract = {New European Union (EU) regulations for UAS operations require an operational risk analysis, which includes an estimation of the potential danger of the UAS crashing. A key parameter for the potential ground risk is the kinetic impact energy of the UAS. The kinetic energy depends on the impact velocity of the UAS and, therefore, on the aerodynamic drag and the weight during free fall. Hence, estimating the impact energy of a UAS requires an accurate drag estimation of the UAS in that state. The paper at hand presents the aerodynamic drag estimation of small-scale multirotor UAS. Multirotor UAS of various sizes and configurations were analysed with a fully unsteady Reynolds-averaged Navier-Stokes approach. These simulations included different velocities and various fuselage pitch angles of the UAS. The results were compared against force measurements performed in a subsonic wind tunnel and provided good consistency. Furthermore, the influence of the UAS`s fuselage pitch angle as well as the influence of fixed and free spinning propellers on the aerodynamic drag was analysed. Free spinning propellers may increase the drag by up to 110\%, depending on the fuselage pitch angle. Increasing the fuselage pitch angle of the UAS lowers the drag by 40\% up to 85\%, depending on the UAS. The data presented in this paper allow for increased accuracy of ground risk assessments.}, language = {en} } @inproceedings{HartungHillgaertnerSchmitzetal.2014, author = {Hartung, Frank and Hillg{\"a}rtner, Michael and Schmitz, G{\"u}nter and Schuba, Marko and Adolphs, Fabian and Hoffend, Jens and Theis, Jochen}, title = {IT-Sicherheit im Automobil}, series = {AmE 2014 : Automotive meets Electronics, Beitr{\"a}ge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund. (GMM-Fachbericht ; 78)}, booktitle = {AmE 2014 : Automotive meets Electronics, Beitr{\"a}ge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund. (GMM-Fachbericht ; 78)}, publisher = {VDE-Verl.}, address = {Berlin}, organization = {VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM)}, isbn = {978-3-8007-3580-8}, pages = {CD-ROM}, year = {2014}, language = {de} } @masterthesis{Hauk2021, type = {Bachelor Thesis}, author = {Hauk, Axel}, title = {REGROW: Modular seating system}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {115 Seiten}, year = {2021}, abstract = {Ein naturbelassenes System oder systematisch Natur? In der Bachelorarbeit COFFEE TO STAY entstand das modulare Seating-System REGROW. Sitzlandschaften f{\"u}r kurze Pausen, zwischen Kommen und Gehen, zwischen Begegnungen und Verabschiedungen - REGROW steht f{\"u}r die Entschleunigung im Alltag. Mit Material und Oberfl{\"a}chen, die von der Natur inspiriert sind, bietet REGROW Zufluchtsorte in urbanen St{\"a}dten, gepr{\"a}gt von Beton und Asphalt. Ein St{\"u}ck Natur, das sich dem r{\"a}umlichen Kontext anpassen kann: Dank seiner flexiblen Modularit{\"a}t kann REGROW auf kleine und auf große R{\"a}ume reagieren. Die Kollektion besteht aus Sitzelementen, die sich durch R{\"u}ckenlehnen und Armlehnen erg{\"a}nzen lassen. Mit den Beistelltischen lassen sich Sitzmodule miteinander im 45 oder 90 Grad Winkel verbinden.}, language = {de} } @inproceedings{Hecker2007, author = {Hecker, Dirk}, title = {Hochwasservorsorge f{\"u}r Abwasseranlagen (DWA-M103) und {\"o}ffentliche Einrichtungen}, year = {2007}, abstract = {Dipl.-Ing. Dirk Hecker von der Ingenieurgesellschaft Tuttahs \& Meyer in Aachen. Vortrag gehalten beim 1. Aachener Softwaretag in der Wasserwirtschaft <1, 2007, Aachen> 27 S. (S. 28-54) Zusammenfassung [des Autors]: Nach den spektakul{\"a}ren Hochwasserereignissen an Rhein, Elbe und Donau hat die Deutsche Vereinigung f{\"u}r Wasserwirtschaft, Abwasser und Abfall e. V. (DWA) einen Fachausschuss zur Erstellung eines Merkblattes M 103 „Hochwasserschutz f{\"u}r Abwasseranlagen" berufen. Das Merkblatt zeigt in den Kapiteln Konzeption, Planungsgrunds{\"a}tze und Hochwassermanagement eine strukturierte Vorgehensweise zur bestm{\"o}glichen Vorsorge zum Schutz der Abwasseranlagen im Hochwasserfall. Entsprechend den Forderungen des im Jahr 2005 verabschiedeten Gesetzes zur Verbesserung des vorbeugenden Hochwasserschutzes, floss in das Wasserhaushaltsgesetz unter anderem die allgemeine Verpflichtung jedes potentiell vom Hochwasser Betroffenen ein, geeignete Schutzmaßnahmen zur Schadensminimierung zu treffen. Hierbei werden speziell die Wasserversorgung und die Abwasserbeseitigung erw{\"a}hnt. Im DWA-M 103 wir detailliert dargestellt wie und mit welchem Aufwand die Abwasseranlagen zu {\"u}berpr{\"u}fen sind und wie hierzu ein Hochwasserschutzkonzept erstellt werden kann. Zus{\"a}tzlich werden Hinweise f{\"u}r die Planung von Abwasseranlagen in hochwassergef{\"a}hrdeten Bereichen gegeben, die den st{\"o}rungsfreien Betrieb im Hochwasserfall gew{\"a}hrleisten sollen. Schlussendlich werden das Hochwassermanagement und der Betrieb dargestellt und hier wichtige Anregungen gegeben im Ernstfall ausreichend vorbereitet zu sein. Das DWA-M 103 richtet sich in erster Linie an die Betreiber und Planer von Abwasseranlagen. Jedoch werden hier auch, gerade durch die Vielzahl von Checklisten, Kommunen Denkanst{\"o}ße und Anregungen f{\"u}r die Hochwasservorsorge/-schutz von {\"o}ffentlichen Geb{\"a}uden und Einrichtungen gegeben.}, subject = {Hochwasserschutz}, language = {de} } @article{HeelDiktaBraekers2021, author = {Heel, Mareike van and Dikta, Gerhard and Braekers, Roel}, title = {Bootstrap based goodness‑of‑fit tests for binary multivariate regression models}, series = {Journal of the Korean Statistical Society}, volume = {51}, journal = {Journal of the Korean Statistical Society}, publisher = {Springer Nature}, address = {Singapur}, issn = {2005-2863 (Online)}, doi = {10.1007/s42952-021-00142-4}, pages = {28 Seiten}, year = {2021}, abstract = {We consider a binary multivariate regression model where the conditional expectation of a binary variable given a higher-dimensional input variable belongs to a parametric family. Based on this, we introduce a model-based bootstrap (MBB) for higher-dimensional input variables. This test can be used to check whether a sequence of independent and identically distributed observations belongs to such a parametric family. The approach is based on the empirical residual process introduced by Stute (Ann Statist 25:613-641, 1997). In contrast to Stute and Zhu's approach (2002) Stute \& Zhu (Scandinavian J Statist 29:535-545, 2002), a transformation is not required. Thus, any problems associated with non-parametric regression estimation are avoided. As a result, the MBB method is much easier for users to implement. To illustrate the power of the MBB based tests, a small simulation study is performed. Compared to the approach of Stute \& Zhu (Scandinavian J Statist 29:535-545, 2002), the simulations indicate a slightly improved power of the MBB based method. Finally, both methods are applied to a real data set.}, language = {en} } @inproceedings{HeerRedkowitzKraft2008, author = {Heer, Thomas and Redkowitz, Daniel and Kraft, Bodo}, title = {Tool Support for the Integration of Light-Weight Ontologies}, isbn = {978-3-642-00670-8}, year = {2008}, abstract = {Abstract of the authors: In many areas of computer science ontologies become more and more important. The use of ontologies for domain modeling often brings up the issue of ontology integration. The task of merging several ontologies, covering specific subdomains, into one united ontology has to be solved. Many approaches for ontology integration aim at automating the process of ontology alignment. However, a complete automation is not feasible, and user interaction is always required. Nevertheless, most ontology integration tools offer only very limited support for the interactive part of the integration process. In this paper, we present a novel approach for the interactive integration of ontologies. The result of the ontology integration is incrementally updated after each definition of a correspondence between ontology elements. The user is guided through the ontologies to be integrated. By restricting the possible user actions, the integrity of all defined correspondences is ensured by the tool we developed. We evaluated our tool by integrating different regulations concerning building design.}, subject = {Ontologie }, language = {de} }