@incollection{GrossHeckenRenz1999,
  author    = {Groß, Rolf Fritz and Hecken, M. and Renz, Ulrich},
  title     = {Hot gas filtration with ceramic filter candles: experimental and numerical investigations on fluid flow during element cleaning},
  series = {High temperature gas cleaning. Vol. 2},
  booktitle = {High temperature gas cleaning. Vol. 2},
  editor    = {Dittler, A. and Hemmer, G. and Kasper, G.},
  publisher = {KIT Institut f{\"u}r Mechanische Verfahrenstechnik und Mechanik},
  address   = {Karlsruhe},
  isbn      = {3-9805220-1-6},
  pages     = {862 -- 873},
  year      = {1999},
  abstract  = {Ceramic hot gas filters are widely used in combined cycles based on pressurised fluidised beds. They fulfil most of the demands with respect to cleaning efficiency and long time durability, but their operation regarding the consumption of pulse gas and energy still has to be optimised. Experimental investigations were carried out to measure the flow field, the pressure and the gas temperature inside the filter candle during pulse jet cleaning. These results are compared with the results of a numerical procedure based on a solution of the two - dimensional conservation equations for momentum and energy. The observed difficulties handling different flow regimes like highly turbulent flow as well as Darcy flow simultaneously are discussed.},
  language  = {en}
}
@article{KronhardtAlexopoulosReisseletal.2014,
  author    = {Kronhardt, Valentina and Alexopoulos, Spiros and Reißel, Martin and Sattler, Johannes, Christoph and Hoffschmidt, Bernhard and H{\"a}nel, Matthias and Doerbeck, Till},
  title     = {High-temperature thermal storage system for solar tower power plants with open-volumetric air receiver simulation and energy balancing of a discretized model},
  series = {Energy procedia},
  volume    = {49},
  journal   = {Energy procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1876-6102 (E-Journal) ; 1876-6102 (Print)},
  doi       = {10.1016/j.egypro.2014.03.094},
  pages     = {870 -- 877},
  year      = {2014},
  abstract  = {This paper describes the modeling of a high-temperature storage system for an existing solar tower power plant with open volumetric receiver technology, which uses air as heat transfer medium (HTF). The storage system model has been developed in the simulation environment Matlab/Simulink®. The storage type under investigation is a packed bed thermal energy storage system which has the characteristics of a regenerator. Thermal energy can be stored and discharged as required via the HTF air. The air mass flow distribution is controlled by valves, and the mass flow by two blowers. The thermal storage operation strategy has a direct and significant impact on the energetic and economic efficiency of the solar tower power plants.},
  language  = {en}
}
@incollection{HoffschmidtAlexopoulosGoettscheetal.2012,
  author    = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and G{\"o}ttsche, Joachim and Sauerborn, Markus},
  title     = {High concentration solar collectors},
  series = {Comprehensive renewable energy / ed. Ali Sayigh. Vol. 3: Solar thermal systems: components and applications},
  volume    = {3},
  booktitle = {Comprehensive renewable energy / ed. Ali Sayigh. Vol. 3: Solar thermal systems: components and applications},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-08-087873-7},
  doi       = {10.1016/B978-0-08-087872-0.00306-1},
  pages     = {165 -- 209},
  year      = {2012},
  abstract  = {Solar thermal concentrated power is an emerging technology that provides clean electricity for the growing energy market. To the solar thermal concentrated power plant systems belong the parabolic trough, the Fresnel collector, the solar dish, and the central receiver system. For high-concentration solar collector systems, optical and thermal analysis is essential. There exist a number of measurement techniques and systems for the optical and thermal characterization of the efficiency of solar thermal concentrated systems. For each system, structure, components, and specific characteristics types are described. The chapter presents additionally an outline for the calculation of system performance and operation and maintenance topics. One main focus is set to the models of components and their construction details as well as different types on the market. In the later part of this chapter, different criteria for the choice of technology are analyzed in detail.},
  language  = {en}
}
@incollection{HoffschmidtAlexopoulosGoettscheetal.2022,
  author    = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and G{\"o}ttsche, Joachim and Sauerborn, Markus and Kaufhold, O.},
  title     = {High Concentration Solar Collectors},
  series = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  booktitle = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-12-819734-9},
  doi       = {10.1016/B978-0-12-819727-1.00058-3},
  pages     = {198 -- 245},
  year      = {2022},
  abstract  = {Solar thermal concentrated power is an emerging technology that provides clean electricity for the growing energy market. To the solar thermal concentrated power plant systems belong the parabolic trough, the Fresnel collector, the solar dish, and the central receiver system. For high-concentration solar collector systems, optical and thermal analysis is essential. There exist a number of measurement techniques and systems for the optical and thermal characterization of the efficiency of solar thermal concentrated systems. For each system, structure, components, and specific characteristics types are described. The chapter presents additionally an outline for the calculation of system performance and operation and maintenance topics. One main focus is set to the models of components and their construction details as well as different types on the market. In the later part of this article, different criteria for the choice of technology are analyzed in detail.},
  language  = {en}
}
@inproceedings{SauerbornHoffschmidtTelleetal.2012,
  author    = {Sauerborn, Markus and Hoffschmidt, Bernhard and Telle, R. and Wagner, M.},
  title     = {Heatable optical analyse system for high temperature absorbers},
  series = {30th ISES Biennial Solar World Congress 2011 : : Kassel, Germany, 28 August - 2 September 2011. Vol. 5},
  booktitle = {30th ISES Biennial Solar World Congress 2011 : : Kassel, Germany, 28 August - 2 September 2011. Vol. 5},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {International Solar Energy Society},
  isbn      = {978-1-61839-364-7},
  pages     = {3852 -- 3860},
  year      = {2012},
  language  = {en}
}
@article{VelrajSeenirajHafneretal.1999,
  author    = {Velraj, R. and Seeniraj, R. V. and Hafner, B. and Faber, Christian and Schwarzer, Klemens},
  title     = {Heat transfer enhancement in a latent heat storage system},
  series = {Solar energy. Vol. 65, iss. 3},
  journal   = {Solar energy. Vol. 65, iss. 3},
  issn      = {0038-092X},
  pages     = {171 -- 180},
  year      = {1999},
  language  = {en}
}
@inproceedings{SchulteSchwagerNoureldinetal.2023,
  author    = {Schulte, Jonas and Schwager, Christian and Noureldin, Kareem and May, Martin and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Gradient controlled startup procedure of a molten-salt power-to-heat energy storage plant based on dynamic process simulation},
  series = {SolarPACES: Solar Power \& Chemical Energy Systems},
  booktitle = {SolarPACES: Solar Power \& Chemical Energy Systems},
  number    = {2815 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4623-6},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0148741},
  pages     = {9 Seiten},
  year      = {2023},
  abstract  = {The integration of high temperature thermal energy storages into existing conventional power plants can help to reduce the CO2 emissions of those plants and lead to lower capital expenditures for building energy storage systems, due to the use of synergy effects [1]. One possibility to implement that, is a molten salt storage system with a powerful power-to-heat unit. This paper presents two possible control concepts for the startup of the charging system of such a facility. The procedures are implemented in a detailed dynamic process model. The performance and safety regarding the film temperatures at heat transmitting surfaces are investigated in the process simulations. To improve the accuracy in predicting the film temperatures, CFD simulations of the electrical heater are carried out and the results are merged with the dynamic model. The results show that both investigated control concepts are safe regarding the temperature limits. The gradient controlled startup performed better than the temperature-controlled startup. Nevertheless, there are several uncertainties that need to be investigated further.},
  language  = {en}
}
@article{PeereBlanke2022,
  author    = {Peere, Wouter and Blanke, Tobias},
  title     = {GHEtool: An open-source tool for borefield sizing in Python},
  series = {Journal of Open Source Software},
  volume    = {7},
  journal   = {Journal of Open Source Software},
  number    = {76},
  editor    = {Vernon, Chris},
  issn      = {2475-9066},
  doi       = {10.21105/joss.04406},
  pages     = {1 -- 4, 4406},
  year      = {2022},
  abstract  = {GHEtool is a Python package that contains all the functionalities needed to deal with borefield design. It is developed for both researchers and practitioners. The core of this package is the automated sizing of borefield under different conditions. The sizing of a borefield is typically slow due to the high complexity of the mathematical background. Because this tool has a lot of precalculated data, GHEtool can size a borefield in the order of tenths of milliseconds. This sizing typically takes the order of minutes. Therefore, this tool is suited for being implemented in typical workflows where iterations are required. GHEtool also comes with a graphical user interface (GUI). This GUI is prebuilt as an exe-file because this provides access to all the functionalities without coding. A setup to install the GUI at the user-defined place is also implemented and available at: https://www.mech.kuleuven.be/en/tme/research/thermal_systems/tools/ghetool.},
  language  = {en}
}
@inproceedings{FendHoffschmidtReutteretal.2006,
  author    = {Fend, Thomas and Hoffschmidt, Bernhard and Reutter, Oliver and Sauerhering, J{\"o}rg and Pitz-Paal, Robert},
  title     = {Gas flow in hot porous materials: the solar air receiver and spin-off applications},
  series = {Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland},
  booktitle = {Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland},
  publisher = {ASME},
  address   = {New York, NY},
  organization    = {International Conference on Nanochannels, Microchannels and Minichannels <4, 2006, Limerick>},
  isbn      = {0-7918-4760-8},
  pages     = {507 -- 514},
  year      = {2006},
  language  = {en}
}
@inproceedings{BreitbachAlexopoulosHoffschmidt2007,
  author    = {Breitbach, Gerd and Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Fluid flow in porous ceramic multichannel crossflower filter modules},
  publisher = {COMSOL Inc.},
  address   = {Burlington, Mass.},
  pages     = {5 S.},
  year      = {2007},
  language  = {en}
}
@article{GoettscheHoffschmidtAlexopoulosetal.2008,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Alexopoulos, Spiros and Funke, J. and Schwarzb{\"o}zl, P.},
  title     = {First Simulation Results for the Hybridization of Small Solar Power Tower Plants},
  series = {EuroSun 2008 : 1st International Conference on Solar Heating, Cooling and Buildings, 2008-10-07 - 2008-10-10, Lissabon (Portugal). Vol. 1},
  journal   = {EuroSun 2008 : 1st International Conference on Solar Heating, Cooling and Buildings, 2008-10-07 - 2008-10-10, Lissabon (Portugal). Vol. 1},
  publisher = {Sociedade Portuguesa De Energia Solar (SPES)},
  address   = {Lisbon},
  isbn      = {978-1-61782-228-5},
  pages     = {1299 -- 1306},
  year      = {2008},
  language  = {en}
}
@article{SchwarzerVieiradaSilvaSchwarzer2011,
  author    = {Schwarzer, Klemens and Vieira da Silva, Maria Eugenia and Schwarzer, Tarik},
  title     = {Field results in Namibia and Brazil of the new solar desalination system for decentralised drinking water production},
  series = {Desalination and water treatment. Vol. 31 (2011), iss. 1-3: selected papers presented at EuroMed 2010 — Desalination for Clean Water and Energy: Cooperation among Mediterranean Countries of Europe and MENA Region, 3-7 October 2010, Tel Aviv, Israel},
  journal   = {Desalination and water treatment. Vol. 31 (2011), iss. 1-3: selected papers presented at EuroMed 2010 — Desalination for Clean Water and Energy: Cooperation among Mediterranean Countries of Europe and MENA Region, 3-7 October 2010, Tel Aviv, Israel},
  pages     = {379 -- 386},
  year      = {2011},
  language  = {en}
}
@article{ElMoussaouiTalbiAtmaneetal.2020,
  author    = {El Moussaoui, Noureddine and Talbi, Sofian and Atmane, Ilyas and Kassmi, Khalil and Schwarzer, Klemens and Chayeb, Hamid and Bachiri, Najib},
  title     = {Feasibility of a new design of a Parabolic Trough Solar Thermal Cooker (PSTC)},
  series = {Solar Energy},
  volume    = {201},
  journal   = {Solar Energy},
  number    = {Vol. 201 (May 2020)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0038-092X},
  doi       = {10.1016/j.solener.2020.03.079},
  pages     = {866 -- 871},
  year      = {2020},
  abstract  = {In this article, we describe the structure, the functioning, and the tests of parabolic trough solar thermal cooker (PSTC). This oven is designed to meet the needs of rural residents, including Urban, which requires stable cooking temperatures above 200 °C. The cooking by this cooker is based on the concentration of the sun's rays on a glass vacuum tube and heating of the oil circulate in a big tube, located inside the glass tube. Through two small tubes, associated with large tube, the heated oil, rise and heats the pot of cooking pot containing the food to be cooked (capacity of 5 kg). This cooker is designed in Germany and extensively tested in Morocco for use by the inhabitants who use wood from forests. During a sunny day, having a maximum solar radiation around 720 W/m2 and temperature ambient around 26 °C, maximum temperatures recorded of the small tube, the large tube and the center of the pot are respectively: 370 °C, 270 °C and 260 °C. The cooking process with food at high (fries, ..), we show that the cooking oil temperature rises to 200 °C, after 1 h of heating, the cooking is done at a temperature of 120 °C for 20 min. These temperatures are practically stable following variations and decreases in the intensity of irradiance during the day. The comparison of these results with those of the literature shows an improvement of 30-50 \% on the maximum value of the temperature with a heat storage that could reach 60 min of autonomy. All the results obtained show the good functioning of the PSTC and the feasibility of cooking food at high temperature (>200 °C).},
  language  = {en}
}
@inproceedings{MayBreitbachAlexopoulosetal.2019,
  author    = {May, Martin and Breitbach, Gerd and Alexopoulos, Spiros and Latzke, Markus and B{\"a}umer, Klaus and Uhlig, Ralf and S{\"o}hn, Matthias and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Experimental facility for investigations of wire mesh absorbers for pressurized gases},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117547},
  pages     = {030035-1 -- 030035-9},
  year      = {2019},
  language  = {en}
}
@inproceedings{KruegerAnthrakidisFischeretal.2009,
  author    = {Kr{\"u}ger, Dirk and Anthrakidis, Anette and Fischer, Stephan and Lokurlu, Ahmet and Walder, Markus and Croy, Reiner and Quaschning, Volker},
  title     = {Experiences with solar steam supply for an industrial steam network in the P3 Project},
  series = {SolarPACES 2009 : electricity, fuels and clean water powered by the sun ; 15 - 18 September 2009, Berlin, Germany ; the 15th SolarPACES conference ; proceedings},
  booktitle = {SolarPACES 2009 : electricity, fuels and clean water powered by the sun ; 15 - 18 September 2009, Berlin, Germany ; the 15th SolarPACES conference ; proceedings},
  publisher = {Deutsches Zentrum f. Luft- u. Raumfahrt},
  address   = {Stuttgart},
  isbn      = {9783000287558},
  pages     = {1 CD-ROM},
  year      = {2009},
  language  = {en}
}
@article{AgrafiotisMavroidisKonstandopoulosetal.2007,
  author    = {Agrafiotis, Christos C. and Mavroidis, Ilias and Konstandopoulos, Athansios G. and Hoffschmidt, Bernhard and Stobbe, Per and Romero, Manuel and Fernandez-Quero, Valerio},
  title     = {Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation},
  series = {Solar energy materials and solar cells},
  volume    = {Vol. 91},
  journal   = {Solar energy materials and solar cells},
  number    = {Iss. 6},
  issn      = {1879-3398 (E-Journal); 0927-0248 (Print)},
  pages     = {474 -- 488},
  year      = {2007},
  language  = {en}
}
@inproceedings{SauerbornKlimekHoffschmidtetal.2012,
  author    = {Sauerborn, Markus and Klimek, J. and Hoffschmidt, Bernhard and Essen, H. and Sieger, S. and Biegel, G. and G{\"o}ttsche, Joachim and Hilger, Patrick},
  title     = {Eurosun 2012 : radar technology for heliostat posititon control},
  series = {Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012},
  booktitle = {Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012},
  address   = {Rijeka},
  pages     = {ID 80},
  year      = {2012},
  language  = {en}
}
@inproceedings{LahrsKrisamHerrmann2023,
  author    = {Lahrs, Lennart and Krisam, Pierre and Herrmann, Ulf},
  title     = {Envisioning a collaborative energy system planning platform for the energy transition at the district level},
  series = {ECOS 2023. The 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems},
  booktitle = {ECOS 2023. The 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems},
  publisher = {Procedings of ECOS 2023},
  doi       = {10.52202/069564-0284},
  pages     = {3163 -- 3170},
  year      = {2023},
  abstract  = {Residential and commercial buildings account for more than one-third of global energy-related greenhouse gas emissions. Integrated multi-energy systems at the district level are a promising way to reduce greenhouse gas emissions by exploiting economies of scale and synergies between energy sources. Planning district energy systems comes with many challenges in an ever-changing environment. Computational modelling established itself as the state-of-the-art method for district energy system planning. Unfortunately, it is still cumbersome to combine standalone models to generate insights that surpass their original purpose. Ideally, planning processes could be solved by using modular tools that easily incorporate the variety of competing and complementing computational models. Our contribution is a vision for a collaborative development and application platform for multi-energy system planning tools at the district level. We present challenges of district energy system planning identified in the literature and evaluate whether this platform can help to overcome these challenges. Further, we propose a toolkit that represents the core technical elements of the platform. Lastly, we discuss community management and its relevance for the success of projects with collaboration and knowledge sharing at their core.},
  language  = {en}
}
@article{KearneyKellyHerrmannetal.2002,
  author    = {Kearney, David W. and Kelly, Bruce and Herrmann, Ulf and Cable, R. and Pacheco, J. and Mahoney, R. and Price, Henry and Blake, D. and Nava, P. and Potrovitza, N.},
  title     = {Engineering Aspects of a Molten Salt Heat Transfer Fluid in a Trough Solar Field},
  series = {Energy : the international journal},
  volume    = {29},
  journal   = {Energy : the international journal},
  number    = {5-6 (Special Issue SolarPaces)},
  issn      = {0360-5442},
  doi       = {10.1016/S0360-5442(03)00191-9},
  pages     = {861 -- 870},
  year      = {2002},
  language  = {en}
}
@inproceedings{MelissNeskakisUsbecketal.1993,
  author    = {Meliß, Michael and Neskakis, A. and Usbeck, S. and Wagner, L. and Wiediger, J{\"u}rgen},
  title     = {Energy supply by coupled solar systems for decentralized application},
  series = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 8: Biomass, agriculture, wind},
  booktitle = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 8: Biomass, agriculture, wind},
  publisher = {Hungarian Energy Society},
  address   = {Budapest},
  pages     = {343 -- 348},
  year      = {1993},
  language  = {en}
}