@article{WerkhausenCroninAlbrachtetal.2019,
  author    = {Werkhausen, Amelie and Cronin, Neil J. and Albracht, Kirsten and Paulsen, G{\o}ran and Larsen, Askild V. and Bojsen-M{\o}ller, Jens and Seynnes, Olivier R.},
  title     = {Training-induced increase in Achilles tendon stiffness affects tendon strain pattern during running},
  series = {PeerJ},
  journal   = {PeerJ},
  publisher = {Peer},
  address   = {London},
  issn      = {21678359},
  doi       = {10.7717/peerj.6764},
  pages     = {18 Seiten},
  year      = {2019},
  abstract  = {Background During the stance phase of running, the elasticity of the Achilles tendon enables the utilisation of elastic energy and allows beneficial contractile conditions for the triceps surae muscles. However, the effect of changes in tendon mechanical properties induced by chronic loading is still poorly understood. We tested the hypothesis that a training-induced increase in Achilles tendon stiffness would result in reduced tendon strain during the stance phase of running, which would reduce fascicle strains in the triceps surae muscles, particularly in the mono-articular soleus. Methods Eleven subjects were assigned to a training group performing isometric singleleg plantarflexion contractions three times per week for ten weeks, and another ten subjects formed a control group. Before and after the training period, Achilles tendon stiffness was estimated, and muscle-tendon mechanics were assessed during running at preferred speed using ultrasonography, kinematics and kinetics. Results Achilles tendon stiffness increased by 18\% (P <0:01) in the training group, but the associated reduction in strain seen during isometric contractions was not statistically significant. Tendon elongation during the stance phase of running was similar after training, but tendon recoil was reduced by 30\% (P <0:01), while estimated tendon force remained unchanged. Neither gastrocnemius medialis nor soleus fascicle shortening during stance was affected by training. Discussion These results show that a training-induced increase in Achilles tendon stiffness altered tendon behaviour during running. Despite training-induced changes in tendon mechanical properties and recoil behaviour, the data suggest that fascicle shortening patterns were preserved for the running speed that we examined. The asymmetrical changes in tendon strain patterns supports the notion that simple inseries models do not fully explain the mechanical output of the muscle-tendon unit during a complex task like running.},
  language  = {en}
}
@article{KetelhutKolditzGoelletal.2019,
  author    = {Ketelhut, Maike and Kolditz, Melanie and G{\"o}ll, Fabian and Braunstein, Bjoern and Albracht, Kirsten and Abel, Dirk},
  title     = {Admittance control of an industrial robot during resistance training},
  series = {IFAC-PapersOnLine},
  volume    = {52},
  journal   = {IFAC-PapersOnLine},
  number    = {19},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2405-8963},
  doi       = {10.1016/j.ifacol.2019.12.102},
  pages     = {223 -- 228},
  year      = {2019},
  abstract  = {Neuromuscular strength training of the leg extensor muscles plays an important role in the rehabilitation and prevention of age and wealth related diseases. In this paper, we focus on the design and implementation of a Cartesian admittance control scheme for isotonic training, i.e. leg extension and flexion against a predefined weight. For preliminary testing and validation of the designed algorithm an experimental research and development platform consisting of an industrial robot and a force plate mounted at its end-effector has been used. Linear, diagonal and arbitrary two-dimensional motion trajectories with different weights for the leg extension and flexion part are applied. The proposed algorithm is easily adaptable to trajectories consisting of arbitrary six-dimensional poses and allows the implementation of individualized trajectories.},
  language  = {en}
}
@article{AchtsnichtSchoenenbornOffenhaeusseretal.2019,
  author    = {Achtsnicht, Stefan and Sch{\"o}nenborn, Kristina and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim},
  title     = {Measurement of the magnetophoretic velocity of different superparamagnetic beads},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {477},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2018.10.066},
  pages     = {244 -- 248},
  year      = {2019},
  abstract  = {The movement of magnetic beads due to a magnetic field gradient is of great interest in different application fields. In this report we present a technique based on a magnetic tweezers setup to measure the velocity factor of magnetically actuated individual superparamagnetic beads in a fluidic environment. Several beads can be tracked simultaneously in order to gain and improve statistics. Furthermore we show our results for different beads with hydrodynamic diameters between 200 and 1000 nm from diverse manufacturers. These measurement data can, for example, be used to determine design parameters for a magnetic separation system, like maximum flow rate and minimum separation time, or to select suitable beads for fixed experimental requirements.},
  language  = {en}
}
@article{AchtsnichtToedterNiehuesetal.2019,
  author    = {Achtsnicht, Stefan and T{\"o}dter, Julia and Niehues, Julia and Tel{\"o}ken, Matthias and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim and Schr{\"o}per, Florian},
  title     = {3D printed modular immunofiltration columns for frequency mixing-based multiplex magnetic immunodetection},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {1},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19010148},
  pages     = {15 Seiten},
  year      = {2019},
  abstract  = {For performing point-of-care molecular diagnostics, magnetic immunoassays constitute a promising alternative to established enzyme-linked immunosorbent assays (ELISA) because they are fast, robust and sensitive. Simultaneous detection of multiple biomolecular targets from one body fluid sample is desired. The aim of this work is to show that multiplex magnetic immunodetection based on magnetic frequency mixing by means of modular immunofiltration columns prepared for different targets is feasible. By calculations of the magnetic response signal, the required spacing between the modules was determined. Immunofiltration columns were manufactured by 3D printing and antibody immobilization was performed in a batch approach. It was shown experimentally that two different target molecules in a sample solution could be individually detected in a single assaying step with magnetic measurements of the corresponding immobilization filters. The arrangement order of the filters and of a negative control did not influence the results. Thus, a simple and reliable approach to multi-target magnetic immunodetection was demonstrated.},
  language  = {en}
}
@article{AchtsnichtPourshahidiOffenhaeusseretal.2019,
  author    = {Achtsnicht, Stefan and Pourshahidi, Ali Mohammad and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim},
  title     = {Multiplex detection of different magnetic beads using frequency scanning in magnetic frequency mixing technique},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {11},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19112599},
  pages     = {13 Seiten},
  year      = {2019},
  abstract  = {In modern bioanalytical methods, it is often desired to detect several targets in one sample within one measurement. Immunological methods including those that use superparamagnetic beads are an important group of techniques for these applications. The goal of this work is to investigate the feasibility of simultaneously detecting different superparamagnetic beads acting as markers using the magnetic frequency mixing technique. The frequency of the magnetic excitation field is scanned while the lower driving frequency is kept constant. Due to the particles' nonlinear magnetization, mixing frequencies are generated. To record their amplitude and phase information, a direct digitization of the pickup-coil's signal with subsequent Fast Fourier Transformation is performed. By synchronizing both magnetic beads using frequency scanning in magnetic frequency mixing technique magnetic fields, a stable phase information is gained. In this research, it is shown that the amplitude of the dominant mixing component is proportional to the amount of superparamagnetic beads inside a sample. Additionally, it is shown that the phase does not show this behaviour. Excitation frequency scans of different bead types were performed, showing different phases, without correlation to their diverse amplitudes. Two commercially available beads were selected and a determination of their amount in a mixture is performed as a demonstration for multiplex measurements.},
  language  = {en}
}
@article{AchtsnichtNeuendorfFassbenderetal.2019,
  author    = {Achtsnicht, Stefan and Neuendorf, Christian and Faßbender, Tobias and N{\"o}lke, Greta and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim and Schr{\"o}per, Florian},
  title     = {Sensitive and rapid detection of cholera toxin subunit B using magnetic frequency mixing detection},
  series = {Plos One},
  volume    = {14},
  journal   = {Plos One},
  number    = {7},
  publisher = {Plos},
  address   = {San Francisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0219356},
  pages     = {e0219356},
  year      = {2019},
  abstract  = {Cholera is a life-threatening disease caused by the cholera toxin (CT) as produced by some Vibrio cholerae serogroups. In this research we present a method which directly detects the toxin's B subunit (CTB) in drinking water. For this purpose we performed a magnetic sandwich immunoassay inside a 3D immunofiltration column. We used two different commercially available antibodies to capture CTB and for binding to superparamagnetic beads. ELISA experiments were performed to select the antibody combination. The beads act as labels for the magnetic frequency mixing detection technique. We show that the limit of detection depends on the type of magnetic beads. A nonlinear Hill curve was fitted to the calibration measurements by means of a custom-written python software. We achieved a sensitive and rapid detection of CTB within a broad concentration range from 0.2 ng/ml to more than 700 ng/ml.},
  language  = {en}
}
@article{BaringhausGaigall2019,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {On an asymptotic relative efficiency concept based on expected volumes of confidence regions},
  series = {Statistics - A Journal of Theoretical and Applied Statistic},
  volume    = {53},
  journal   = {Statistics - A Journal of Theoretical and Applied Statistic},
  number    = {6},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1029-4910},
  doi       = {10.1080/02331888.2019.1683560},
  pages     = {1396 -- 1436},
  year      = {2019},
  abstract  = {The paper deals with an asymptotic relative efficiency concept for confidence regions of multidimensional parameters that is based on the expected volumes of the confidence regions. Under standard conditions the asymptotic relative efficiencies of confidence regions are seen to be certain powers of the ratio of the limits of the expected volumes. These limits are explicitly derived for confidence regions associated with certain plugin estimators, likelihood ratio tests and Wald tests. Under regularity conditions, the asymptotic relative efficiency of each of these procedures with respect to each one of its competitors is equal to 1. The results are applied to multivariate normal distributions and multinomial distributions in a fairly general setting.},
  language  = {en}
}
@article{Gaigall2019,
  author    = {Gaigall, Daniel},
  title     = {On a new approach to the multi-sample goodness-of-fit problem},
  series = {Communications in Statistics - Simulation and Computation},
  volume    = {53},
  journal   = {Communications in Statistics - Simulation and Computation},
  number    = {10},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1532-4141},
  doi       = {10.1080/03610918.2019.1618472},
  pages     = {2971 -- 2989},
  year      = {2019},
  abstract  = {Suppose we have k samples X₁,₁,…,X₁,ₙ₁,…,Xₖ,₁,…,Xₖ,ₙₖ with different sample sizes ₙ₁,…,ₙₖ and unknown underlying distribution functions F₁,…,Fₖ as observations plus k families of distribution functions {G₁(⋅,ϑ);ϑ∈Θ},…,{Gₖ(⋅,ϑ);ϑ∈Θ}, each indexed by elements ϑ from the same parameter set Θ, we consider the new goodness-of-fit problem whether or not (F₁,…,Fₖ) belongs to the parametric family {(G₁(⋅,ϑ),…,Gₖ(⋅,ϑ));ϑ∈Θ}. New test statistics are presented and a parametric bootstrap procedure for the approximation of the unknown null distributions is discussed. Under regularity assumptions, it is proved that the approximation works asymptotically, and the limiting distributions of the test statistics in the null hypothesis case are determined. Simulation studies investigate the quality of the new approach for small and moderate sample sizes. Applications to real-data sets illustrate how the idea can be used for verifying model assumptions.},
  language  = {en}
}
@article{CzarneckiBensbergAuth2019,
  author    = {Czarnecki, Christian and Bensberg, Frank and Auth, Gunnar},
  title     = {Die Rolle von Softwarerobotern f{\"u}r die zuk{\"u}nftige Arbeitswelt},
  series = {HMD Praxis der Wirtschaftsinformatik},
  volume    = {56},
  journal   = {HMD Praxis der Wirtschaftsinformatik},
  number    = {4},
  publisher = {Springer},
  address   = {Cham},
  issn      = {2198-2775},
  doi       = {10.1365/s40702-019-00548-z},
  pages     = {795 -- 808},
  year      = {2019},
  abstract  = {Im Rahmen der Digitalisierung ist die zunehmende Automatisierung von bisher manuellen Prozessschritten ein Aspekt, der massive Auswirkungen auf die zuk{\"u}nftige Arbeitswelt haben wird. In diesem Kontext werden an den Einsatz von Softwarerobotern zur Prozessautomatisierung hohe Erwartungen gekn{\"u}pft. Bei den Implementierungsans{\"a}tzen wird die Diskussion aktuell insbesondere durch Robotic Process Automation (RPA) und Chatbots gepr{\"a}gt. Beide Ans{\"a}tze verfolgen das gemeinsame Ziel einer 1:1-Automatisierung von menschlichen Handlungen und dadurch ein direktes Ersetzen von Mitarbeitern durch Maschinen. Bei RPA werden Prozesse durch Softwareroboter erlernt und automatisiert ausgef{\"u}hrt. Dabei emulieren RPA-Roboter die Eingaben auf der bestehenden Pr{\"a}sentationsschicht, so dass keine {\"A}nderungen an vorhandenen Anwendungssystemen notwendig sind. Am Markt werden bereits unterschiedliche RPA-L{\"o}sungen als Softwareprodukte angeboten. Durch Chatbots werden Ein- und Ausgaben von Anwendungssystemen {\"u}ber nat{\"u}rliche Sprache realisiert. Dadurch ist die Automatisierung von unternehmensexterner Kommunikation (z. B. mit Kunden) aber auch von unternehmensinternen Assistenzt{\"a}tigkeiten m{\"o}glich. Der Beitrag diskutiert die Auswirkungen von Softwarerobotern auf die Arbeitswelt anhand von Anwendungsbeispielen und erl{\"a}utert die unternehmensindividuelle Entscheidung {\"u}ber den Einsatz von Softwarerobotern anhand von Effektivit{\"a}ts- und Effizienzzielen.},
  language  = {de}
}
@article{SteuerDankertGilmartinMulleretal.2019,
  author    = {Steuer-Dankert, Linda and Gilmartin, Shannon K. and Muller, Carol B. and Dungs, Carolin and Sheppard, Sheri and Leicht-Scholten, Carmen},
  title     = {Expanding engineering limits : a concept for socially responsible education of engineers},
  series = {The international journal of engineering education},
  volume    = {35},
  journal   = {The international journal of engineering education},
  number    = {2},
  isbn      = {0949-149X},
  pages     = {658 -- 673},
  year      = {2019},
  language  = {en}
}
@article{Kurz2019,
  author    = {Kurz, Melanie},
  title     = {Images of Sweden in Germany: from Sundborn and Bullerby to Ikea},
  series = {nomad: the magazine for new design culture, business affairs and contemporary lifestyle},
  journal   = {nomad: the magazine for new design culture, business affairs and contemporary lifestyle},
  number    = {8},
  isbn      = {2513-0714},
  pages     = {136 -- 147},
  year      = {2019},
  language  = {en}
}
@article{Golland2019,
  author    = {Golland, Alexander},
  title     = {Die Verarbeitung zum Zwecke der Vertragserf{\"u}llung - Leitlinien des Europ{\"a}ischen Datenschutzausschusses},
  series = {DSB Datenschutz-Berater},
  volume    = {43},
  journal   = {DSB Datenschutz-Berater},
  number    = {7-8},
  isbn      = {0170-7256},
  pages     = {167 -- 168},
  year      = {2019},
  language  = {de}
}
@article{Golland2019,
  author    = {Golland, Alexander},
  title     = {Reichweite des "Joint Controllership": Neue Fragen der gemeinsamen Verantwortlichkeit Zugleich Kommentar zu EuGH, Urteil vom 29. 7. 2019 - C-40/1},
  series = {K\&R Kommunikation \& Recht},
  volume    = {22},
  journal   = {K\&R Kommunikation \& Recht},
  number    = {9},
  publisher = {dfv Mediengruppe, Deutscher Fachverlag GmbH},
  address   = {Frankfurt am Main},
  issn      = {1434-6354},
  pages     = {533 -- 537},
  year      = {2019},
  abstract  = {Kein Urteil zum Datenschutzrecht sorgte im vergangenen Jahr f{\"u}r mehr panische Reaktionen als die Entscheidung des EuGH in der Rechtssache "Wirtschaftsakademie Schleswig-Holstein"(C-210/16). Das Urteil warf in datenschutzrechtlicher Literatur und {\"O}ffentlichkeit zahlreiche Fragen auf: Ist jetzt jeder "gemeinsam" Verantwortlicher? Was sind die Kriterien? Der EuGH hat k{\"u}rzlich in einem - dem allgemeinen Vernehmen nach aufsehenerregenden, de facto aber kaum {\"u}berraschenden - Urteil f{\"u}r Klarheit gesorgt. Dabei hat das Gericht jedoch einige Fragen offengelassen und neue Fragen aufgeworfen. Ein Blick auf alte und neue Herausforderungen in Kooperationsszenarien.},
  language  = {de}
}
@article{Golland2019,
  author    = {Golland, Alexander},
  title     = {Gemeinsam einsam: Ein „Like" f{\"u}r die gemeinsame Verantwortlichkeit?},
  series = {ZD Zeitschrift f{\"u}r Datenschutz},
  volume    = {9},
  journal   = {ZD Zeitschrift f{\"u}r Datenschutz},
  number    = {9},
  editor    = {Hoeren, Thomas and Schneider, Jochen and Selmayr, Martin and Spies, Axel and Wybitul, Tim},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {2192-5593},
  pages     = {381 -- 382},
  year      = {2019},
  language  = {de}
}
@article{Golland2019,
  author    = {Golland, Alexander},
  title     = {Das 2. Datenschutz-Anpassungs- und Umsetzungsgesetz EU {\"A}nderungen und Herausforderungen f{\"u}r Unternehmen},
  series = {NWB Unternehmensteuern und Bilanzen - StuB},
  journal   = {NWB Unternehmensteuern und Bilanzen - StuB},
  number    = {20},
  isbn      = {1615-8024},
  pages     = {787 -- 790},
  year      = {2019},
  abstract  = {Kurz vor der parlamentarischen Sommerpause hat der Bundestag am 28.6.2019 das 2. Datenschutz-Anpassungs- und Umsetzungsgesetz EU (2. DSAnpUG-EU) beschlossen, der Bundesrat hat diesem Gesetz am 20.9.2019 zugestimmt. Das Artikelgesetz, welches im sog. Omnibusverfahren zahlreiche Gesetze auf Bundesebene {\"a}ndert, soll zur Vereinheitlichung und Anpassung des Bundesrechts an die seit Mai 2018 geltende Datenschutz-Grundverordnung (DSGVO) beitragen.},
  language  = {de}
}
@article{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Die arbeitsvertragliche Vereinbarung von Vertragsstrafen : Anforderungen an wirksame Vertragsstrafenabreden in Formulararbeitsvertr{\"a}gen beachten},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {45},
  issn      = {0028-3460},
  pages     = {3302 -- 3308},
  year      = {2019},
  language  = {de}
}
@article{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Die Optionen des Arbeitgebers nach Krankmeldung des Arbeitnehmers : Ein {\"U}berblick {\"u}ber die Rechte und Pflichten des Arbeitgebers bei Arbeitsunf{\"a}higkeit des Mitarbeiters},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {30},
  issn      = {0028-3460},
  pages     = {2222 -- 2229},
  year      = {2019},
  language  = {de}
}
@article{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Rechtssichere Vereinbarungen von K{\"u}ndigungsfristen im Arbeitsvertrag : Weitestgehende Abdingbarkeit gesetzlicher Vorgaben erm{\"o}glicht passgenaue Gestaltungen},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {23},
  issn      = {0028-3460},
  pages     = {1693 -- 1699},
  year      = {2019},
  language  = {de}
}
@article{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Auslandsentsendungen im arbeitsrechtlichen Zusammenhang : Ausgestaltung eines Entsendungsvertrags und mitbestimmungsrechtliche Aspekte},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {19},
  issn      = {0028-3460},
  pages     = {1400 -- 1406},
  year      = {2019},
  language  = {de}
}
@article{Olbertz2019,
  author    = {Olbertz, Klaus},
  title     = {Arbeitsrechtliche Akzente der Gesetzgebung und Rechtsprechung in 2018 : Ein kurzweiliger R{\"u}ckblick auf das Arbeitsrecht des vergangenen Jahres},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {5},
  issn      = {0028-3460},
  pages     = {266 -- 279},
  year      = {2019},
  language  = {de}
}
@article{HerrmannSchwarzenbartDittmannGabrieletal.2019,
  author    = {Herrmann, Ulf and Schwarzenbart, Marc and Dittmann-Gabriel, S{\"o}ren and May, Martin},
  title     = {Hochtemperatur-W{\"a}rmespeicher f{\"u}r die Strom- und W{\"a}rmewende},
  series = {Solarzeitalter : Politik, Kultur und {\"O}konomie erneuerbarer Energien},
  volume    = {31},
  journal   = {Solarzeitalter : Politik, Kultur und {\"O}konomie erneuerbarer Energien},
  number    = {2},
  issn      = {0937-3802},
  pages     = {18 -- 23},
  year      = {2019},
  language  = {de}
}
@article{FingerGoetten2019,
  author    = {Finger, Felix and G{\"o}tten, Falk},
  title     = {Neue Ans{\"a}tze f{\"u}r die Entwicklung von unbemannten Flugger{\"a}ten},
  series = {Ingenieurspiegel},
  volume    = {2019},
  journal   = {Ingenieurspiegel},
  number    = {1},
  isbn      = {1868-5919},
  pages     = {67 -- 68},
  year      = {2019},
  abstract  = {Wie sieht das unbemannte Flugzeug von {\"U}bermorgen aus? Dieser Frage stellen sich Forscher an der Fachhochschule Aachen. Die weltweit rasant fortschreitende Entwicklung des Marktes f{\"u}r unbemannte Flugger{\"a}te (UAVs - „Unmanned Aerial Vehicles") bietet großes Potenzial f{\"u}r Wachstum und Wertsch{\"o}pfung. Unbemannte fliegende Systeme k{\"o}nnen - f{\"u}r bestimmte Anwendungsgebiete - wesentlich g{\"u}nstiger, kleiner und effizienter ausgelegt werden als bemannte L{\"o}sungen. Dabei sind sich viele Unternehmen {\"u}ber das m{\"o}gliche Potential dieser Technologie noch gar nicht bewusst.},
  language  = {de}
}
@article{GoettscheAlexopoulosDuemmleretal.2019,
  author    = {G{\"o}ttsche, Joachim and Alexopoulos, Spiros and D{\"u}mmler, Andreas and Maddineni, S. K.},
  title     = {Multi-Mirror Array Calculations With Optical Error},
  pages     = {1 -- 6},
  year      = {2019},
  abstract  = {The optical performance of a 2-axis solar concentrator was simulated with the COMSOL Multiphysics® software. The concentrator consists of a mirror array, which was created using the application builder. The mirror facets are preconfigured to form a focal point. During tracking all mirrors are moved simultaneously in a coupled mode by 2 motors in two axes, in order to keep the system in focus with the moving sun. Optical errors on each reflecting surface were implemented in combination with the solar angular cone of ± 4.65 mrad. As a result, the intercept factor of solar radiation that is available to the receiver was calculated as a function of the transversal and longitudinal angles of incidence. In addition, the intensity distribution on the receiver plane was calculated as a function of the incidence angles.},
  language  = {en}
}
@article{RossiParisiCasarietal.2019,
  author    = {Rossi, Leonardo and Parisi, Davide and Casari, Chiara and Montanari, Luca and Ruggieri, Gabriella and Holtschoppen, Britta and Butenweg, Christoph},
  title     = {Empirical Data about Direct Economic Consequences of Emilia-Romagna 2012 Earthquake on Long-Span-Beam Buildings},
  series = {Earthquake Spectra},
  volume    = {35},
  journal   = {Earthquake Spectra},
  number    = {4},
  issn      = {1944-8201},
  doi       = {10.1193/100118EQS224DP},
  pages     = {1979 -- 2001},
  year      = {2019},
  language  = {en}
}
@article{ButenwegMarinkovicSalatic2019,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Salatic, Ratko},
  title     = {Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-019-00602-7},
  pages     = {3397 -- 3422},
  year      = {2019},
  language  = {en}
}
@article{MarinkovicButenweg2019,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames},
  series = {Engineering Structures},
  volume    = {197},
  journal   = {Engineering Structures},
  number    = {Article 109435},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2019.109435},
  year      = {2019},
  language  = {en}
}
@article{RossiHoltschoppenButenweg2019,
  author    = {Rossi, Leonardo and Holtschoppen, Britta and Butenweg, Christoph},
  title     = {Official data on the economic consequences of the 2012 Emilia-Romagna earthquake: a first analysis of database SFINGE},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  number    = {9},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007\%2Fs10518-019-00655-8},
  pages     = {4855 -- 4884},
  year      = {2019},
  language  = {en}
}
@article{RossiStupazziniParisietal.2019,
  author    = {Rossi, Leonardo and Stupazzini, Marco and Parisi, Davide and Holtschoppen, Britta and Ruggieri, Gabriella and Butenweg, Christoph},
  title     = {Empirical fragility functions and loss curves for long-span-beam buildings based on the 2012 Emilia-Romagna earthquake official database},
  series = {Bulletin of Earthquake Engineering},
  volume    = {18},
  journal   = {Bulletin of Earthquake Engineering},
  publisher = {Springer Nature},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-019-00759-1},
  pages     = {1693 -- 1721},
  year      = {2019},
  abstract  = {The 2012 Emilia-Romagna earthquake, that mainly struck the homonymous Italian region provoking 28 casualties and damage to thousands of structures and infrastructures, is an exceptional source of information to question, investigate, and challenge the validity of seismic fragility functions and loss curves from an empirical standpoint. Among the most recent seismic events taking place in Europe, that of Emilia-Romagna is quite likely one of the best documented, not only in terms of experienced damages, but also for what concerns occurred losses and necessary reconstruction costs. In fact, in order to manage the compensations in a fair way both to citizens and business owners, soon after the seismic sequence, the regional administrative authority started (1) collecting damage and consequence-related data, (2) evaluating information sources and (3) taking care of the cross-checking of various reports. A specific database—so-called Sistema Informativo Gestione Europa (SFINGE)—was devoted to damaged business activities. As a result, 7 years after the seismic events, scientists can rely on a one-of-a-kind, vast and consistent database, containing information about (among other things): (1) buildings' location and dimensions, (2) occurred structural damages, (3) experienced direct economic losses and (4) related reconstruction costs. The present work is focused on a specific data subset of SFINGE, whose elements are Long-Span-Beam buildings (mostly precast) deployed for business activities in industry, trade or agriculture. With the available set of data, empirical fragility functions, cost and loss ratio curves are elaborated, that may be included within existing Performance Based Earthquake Engineering assessment toolkits.},
  language  = {en}
}
@article{Finkenberger2019,
  author    = {Finkenberger, Isabel Maria},
  title     = {Bodenpolitik als Instrument strategischer Transformation},
  series = {UrbanLab-Magazin : Fachzeitschrift f{\"u}r Stadt- und Quartierplanung},
  volume    = {2019},
  journal   = {UrbanLab-Magazin : Fachzeitschrift f{\"u}r Stadt- und Quartierplanung},
  number    = {05},
  pages     = {18 -- 25},
  year      = {2019},
  language  = {de}
}
@article{KunkelGebhardtMpofuetal.2019,
  author    = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbulani and Kallweit, Stephan},
  title     = {Quality assurance in metal powder bed fusion via deep-learning-based image classification},
  series = {Rapid Prototyping Journal},
  volume    = {26},
  journal   = {Rapid Prototyping Journal},
  number    = {2},
  issn      = {1355-2546},
  doi       = {10.1108/RPJ-03-2019-0066},
  pages     = {259 -- 266},
  year      = {2019},
  language  = {en}
}
@article{SchiedermeierRettnerHeilmannetal.2019,
  author    = {Schiedermeier, Maximilian and Rettner, Cornelius and Heilmann, Marcel and Schneider, Felix and Marz, Martin},
  title     = {Interference of automotive HV-DC-systems by traction voltage-source-inverters (VSI)},
  series = {2019 IEEE Transportation Electrification Conference (ITEC-India)},
  journal   = {2019 IEEE Transportation Electrification Conference (ITEC-India)},
  publisher = {IEEE},
  address   = {New York},
  doi       = {10.1109/ITEC-India48457.2019.ITECINDIA2019-37},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {en}
}
@article{GronsfeldJoachimMalecha2019,
  author    = {Gronsfeld, Richard and Joachim, Klubert and Malecha, Hartmut},
  title     = {3-D-Visualisierung von vorhandenen Staubauwerken zur holistischen Planung und {\"U}berwachung},
  series = {Wasserwirtschaft},
  volume    = {109},
  journal   = {Wasserwirtschaft},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2192-8762},
  doi       = {10.1007/s35147-019-0075-x},
  pages     = {82 -- 85},
  year      = {2019},
  language  = {de}
}
@article{WeberEnglhardArentetal.2019,
  author    = {Weber, Tobias and Englhard, Markus and Arent, Jan-Christoph and Hausmann, Joachim},
  title     = {An experimental characterization of wrinkling generated during prepreg autoclave manufacturing using caul plates},
  series = {Journal of Composite Materials},
  volume    = {53},
  journal   = {Journal of Composite Materials},
  number    = {26-27},
  issn      = {1530-793X},
  doi       = {10.1177/0021998319846556},
  pages     = {3757 -- 3773},
  year      = {2019},
  language  = {en}
}
@article{RoethSlabuKessleretal.2019,
  author    = {Roeth, A.A. and Slabu, I. and Kessler, A. and Engelmann, Ulrich M.},
  title     = {Local treatment of pancreatic cancer with magnetic nanoparticles},
  series = {HPB},
  volume    = {21},
  journal   = {HPB},
  number    = {Supplement 3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1365-182X},
  doi       = {10.1016/j.hpb.2019.10.959},
  pages     = {S868 -- S869},
  year      = {2019},
  language  = {en}
}
@article{KrollLudwigs2019,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Vernachl{\"a}ssigung des unionsrechtlichen Anerkennungsprinzips durch den BGH},
  series = {NJW Neue Juristische Wochenschrift},
  journal   = {NJW Neue Juristische Wochenschrift},
  number    = {32},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0341-1915},
  pages     = {2277 -- 2279},
  year      = {2019},
  language  = {de}
}
@article{ValeroBungCrookston2019,
  author    = {Valero, D. and Bung, Daniel B. and Crookston, B. M.},
  title     = {Closure to "Energy Dissipation of a Type III Basin under Design and Adverse Conditions for Stepped and Smooth Spillways"},
  series = {Journal of Hydraulic Engineering},
  volume    = {146},
  journal   = {Journal of Hydraulic Engineering},
  number    = {2},
  publisher = {ASCE},
  address   = {Reston, Va.},
  doi       = {10.1061/(ASCE)HY.1943-7900.0001669},
  year      = {2019},
  language  = {en}
}
@article{MalikAbdievaUalievaetal.2019,
  author    = {Malik, A. M. and Abdieva, G. Zh. and Ualieva, P. S. and Zhubanova, A. A. and Temiz Artmann, Ayseg{\"u}l},
  title     = {CКPИНИНГ МИКPOOPГAНИЗМOВ-ДECТPУКТOPOВ XЛOРOPГAНИЧECКИX ЗAГPЯЗНИТEЛEЙ},
  series = {Eurasian Journal of Ecology},
  volume    = {61},
  journal   = {Eurasian Journal of Ecology},
  number    = {4},
  issn      = {2617-7358},
  pages     = {61 -- 71},
  year      = {2019},
  language  = {ru}
}
@article{AttarMerkKotliaretal.2019,
  author    = {Attar, Mandana Hossein Zadeh and Merk, Hans F. and Kotliar, Konstantin and Wurpts, Gerda and R{\"o}seler, Stefani and Moll-Slodowy, Silke and Plange, Johann and Baron, Jens Malte and Balakirski, Galina},
  title     = {The CD63 basophil activation test as a diagnostic tool for assessing autoimmunity in patients with chronic spontaneous urticaria},
  series = {European Journal of Dermatology},
  volume    = {29},
  journal   = {European Journal of Dermatology},
  number    = {6},
  doi       = {10.1684/ejd.2019.3680},
  pages     = {614 -- 618},
  year      = {2019},
  language  = {en}
}
@article{PilasSelmerKeusgenetal.2019,
  author    = {Pilas, Johanna and Selmer, Thorsten and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Screen-printed carbon electrodes modified with graphene oxide for the design of a reagent-free NAD+-dependent biosensor array},
  series = {Analytical Chemistry},
  volume    = {91},
  journal   = {Analytical Chemistry},
  number    = {23},
  publisher = {ACS Publications},
  address   = {Washington},
  doi       = {10.1021/acs.analchem.9b04481},
  pages     = {15293 -- 15299},
  year      = {2019},
  language  = {en}
}
@article{LimpertWiesenFerreinetal.2019,
  author    = {Limpert, Nicolas and Wiesen, Patrick and Ferrein, Alexander and Kallweit, Stephan and Schiffer, Stefan},
  title     = {The ROSIN Project and its Outreach to South Africa},
  series = {R\&D Journal},
  volume    = {35},
  journal   = {R\&D Journal},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {en}
}
@article{Thomas2019,
  author    = {Thomas, Axel},
  title     = {Die Wiederbelebung der Mitarbeiterwohnungsidee bei kommunalen Unternehmen},
  series = {VM Verwaltung und Management},
  volume    = {25},
  journal   = {VM Verwaltung und Management},
  number    = {6},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  issn      = {0947-9856},
  doi       = {10.5771/0947-9856-2019-6-286},
  pages     = {286 -- 291},
  year      = {2019},
  language  = {de}
}
@article{WilbringEnning2019,
  author    = {Wilbring, Daniela and Enning, Manfred},
  title     = {Stromversorgung auf G{\"u}terwagen - Aktuelle Bem{\"u}hungen zur Standardisierung},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {68},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {11},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {64 -- 67},
  year      = {2019},
  language  = {de}
}
@article{FingerBilBraun2019,
  author    = {Finger, Felix and Bil, Cees and Braun, Carsten},
  title     = {Initial Sizing Methodology for Hybrid-Electric General Aviation Aircraft},
  series = {Journal of Aircraft},
  volume    = {57},
  journal   = {Journal of Aircraft},
  number    = {2},
  issn      = {1533-3868},
  doi       = {10.2514/1.C035428},
  pages     = {245 -- 255},
  year      = {2019},
  language  = {en}
}
@article{EngelmannSeifertMuesetal.2019,
  author    = {Engelmann, Ulrich M. and Seifert, Julian and Mues, Benedikt and Roitsch, Stefan and M{\´e}nager, Christine and Schmidt, Annette M. and Slabu, Ioana},
  title     = {Heating efficiency of magnetic nanoparticles decreases with gradual immobilization in hydrogels},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {471},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2018.09.113},
  pages     = {486 -- 494},
  year      = {2019},
  language  = {en}
}
@article{EngelmannShashaTeemanetal.2019,
  author    = {Engelmann, Ulrich M. and Shasha, Carolyn and Teeman, Eric and Slabu, Iona and Krishnan, Kannan M.},
  title     = {Predicting size-dependent heating efficiency of magnetic nanoparticles from experiment and stochastic N{\´e}el-Brown Langevin simulation},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {471},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2018.09.041},
  pages     = {450 -- 456},
  year      = {2019},
  language  = {en}
}
@article{SlabuRoethEngelmannetal.2019,
  author    = {Slabu, Ioana and Roeth, Anjali A. and Engelmann, Ulrich M. and Wiekhorst, Frank and Buhl, Eva M. and Neumann, Ulf P. and Schmitz-Rode, Thomas},
  title     = {Modeling of magnetoliposome uptake in human pancreatic tumor cells in vitro},
  series = {Nanotechnology},
  volume    = {30},
  journal   = {Nanotechnology},
  number    = {18},
  issn      = {1361-6528},
  doi       = {10.1088/1361-6528/ab033e},
  pages     = {184004},
  year      = {2019},
  language  = {en}
}
@article{EngelGemuendeHoltmannetal.2019,
  author    = {Engel, Mareike and Gem{\"u}nde, Andre and Holtmann, Dirk and M{\"u}ller-Renno, Christine and Ziegler, Christiane and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Clostridium acetobutylicum's connecting world: cell appendage formation in bioelectrochemical systems},
  series = {ChemElectroChem},
  journal   = {ChemElectroChem},
  number    = {Accepted Article},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2196-0216},
  doi       = {10.1002/celc.201901656},
  year      = {2019},
  language  = {en}
}
@article{KarschuckFilipovBollellaetal.2019,
  author    = {Karschuck, T. L. and Filipov, Y. and Bollella, P. and Sch{\"o}ning, Michael Josef and Katz, E.},
  title     = {Not-XOR (NXOR) logic gate based on an enzyme-catalyzed reaction},
  series = {International Journal of Unconventional Computing},
  volume    = {14},
  journal   = {International Journal of Unconventional Computing},
  number    = {3-4},
  publisher = {Old City Publishing},
  address   = {Philadelphia},
  issn      = {1548-7199},
  pages     = {235 -- 242},
  year      = {2019},
  abstract  = {Enzyme-catalyzed reactions have been designed to mimic various Boolean logic gates in the general framework of unconventional biomolecular computing. While some of the logic gates, particularly OR, AND, are easy to realize with biocatalytic reactions and have been reported in numerous publications, some other, like NXOR, are very challenging and have not been realized yet with enzyme reactions. The paper reports on a novel approach to mimicking the NXOR logic gate using the bell-shaped enzyme activity dependent on pH values. Shifting pH from the optimum value to the acidic or basic values by using acid or base inputs (meaning 1,0 and 0,1 inputs) inhibits the enzyme reaction, while keeping the optimum pH (assuming 0,0 and 1,1 input combinations) preserves a high enzyme activity. The challenging part of the present approach is the selection of an enzyme with a well-demonstrated bell-shape activity dependence on the pH value. While many enzymes can satisfy this condition, we selected pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase as this enzyme has the optimum pH center-located on the pH scale allowing the enzyme activity change by the acidic and basic pH shift from the optimum value corresponding to the highest activity. The present NXOR gate is added to the biomolecular "toolbox" as a new example of Boolean logic gates based on enzyme reactions.},
  language  = {en}
}
@article{DantismRoehlenWagneretal.2019,
  author    = {Dantism, Shahriar and R{\"o}hlen, Desiree and Wagner, Torsten and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {A LAPS-based differential sensor for parallelized metabolism monitoring of various bacteria},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {21},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19214692},
  pages     = {Artikel 4692},
  year      = {2019},
  abstract  = {Monitoring the cellular metabolism of bacteria in (bio)fermentation processes is crucial to control and steer them, and to prevent undesired disturbances linked to metabolically inactive microorganisms. In this context, cell-based biosensors can play an important role to improve the quality and increase the yield of such processes. This work describes the simultaneous analysis of the metabolic behavior of three different types of bacteria by means of a differential light-addressable potentiometric sensor (LAPS) set-up. The study includes Lactobacillus brevis, Corynebacterium glutamicum, and Escherichia coli, which are often applied in fermentation processes in bioreactors. Differential measurements were carried out to compensate undesirable influences such as sensor signal drift, and pH value variation during the measurements. Furthermore, calibration curves of the cellular metabolism were established as a function of the glucose concentration or cell number variation with all three model microorganisms. In this context, simultaneous (bio)sensing with the multi-organism LAPS-based set-up can open new possibilities for a cost-effective, rapid detection of the extracellular acidification of bacteria on a single sensor chip. It can be applied to evaluate the metabolic response of bacteria populations in a (bio)fermentation process, for instance, in the biogas fermentation process.},
  language  = {en}
}
@article{SagymbayGENZhetal.2019,
  author    = {Sagymbay, Altynay and G.E., Nusupbaeva and N.Zh, Tleumbetova and A.S., Mutalieva and Nurpeisova, Ainur and D.B., Jussupova and Digel, Ilya},
  title     = {Molecular genetics features of the epidemic season 2017-2018 on the influenza in Kazakhstan},
  series = {Eurasian Journal of Ecology},
  volume    = {58},
  journal   = {Eurasian Journal of Ecology},
  number    = {1},
  isbn      = {2617-7358},
  pages     = {50 -- 60},
  year      = {2019},
  language  = {ru}
}