@article{MuellerBongaertsBovenbergetal.2001,
  author    = {M{\"u}ller, Ulrike and Bongaerts, Johannes and Bovenberg, Roel and Jossek, Ralf and Kr{\"a}mer, Marco and Linnemann, J. and M{\"u}schen, S. and Ritterbecks, S. and Sprenger, G. and Wubbolts, Marcel},
  title     = {Metabolic engineering to produce fine chemicals in Escherichia coli},
  series = {Mededelingen van de Faculteit Landbouwwetenschappen, Rijksuniversiteit Gent},
  volume    = {66 (3a)},
  journal   = {Mededelingen van de Faculteit Landbouwwetenschappen, Rijksuniversiteit Gent},
  issn      = {0035-533x},
  pages     = {215 -- 217},
  year      = {2001},
  language  = {en}
}
@article{GerigkMaassTakorsetal.2000,
  author    = {Gerigk, M. and Maaß, D. and Takors, Ralf and Kreutzer, A. and Wandrey, Christian and Bongaerts, Johannes and Wubbolts, Marcel},
  title     = {Fermentative Herstellung von L-Phenylalanin im Fed-Batch Verfahren mit E. coli unter Einbindung eines integrierten Aufarbeitungsverfahrens},
  series = {Chemie-Ingenieur-Technik (CIT)},
  volume    = {Vol. 72},
  journal   = {Chemie-Ingenieur-Technik (CIT)},
  number    = {Iss. 9},
  issn      = {1522-2640 (E-Journal); 0009-286X (Print)},
  pages     = {926 -- 927},
  year      = {2000},
  language  = {de}
}
@article{WackwitzBongaertsGoodmanetal.1999,
  author    = {Wackwitz, B. and Bongaerts, Johannes and Goodman, S. D. and Unden, Gottfried},
  title     = {Growth phase-dependent regulation of nuoA-N expression in Escherichia coli K-12 by the Fis protein: upstream binding sites and bioenergetic significance},
  series = {Molecular and general genetics : MGG},
  volume    = {Vol. 262},
  journal   = {Molecular and general genetics : MGG},
  number    = {Iss. 4 - 5},
  issn      = {1617-4623 (E-Journal); 1617-4615 (Print)},
  pages     = {876 -- 883},
  year      = {1999},
  language  = {en}
}
@article{ZientzBongaertsUnden1998,
  author    = {Zientz, Evelyn and Bongaerts, Johannes and Unden, Gottfried},
  title     = {Fumarate regulation of gene expression in Escherichia coli by the DcuSR (dcuSR genes) two-component regulatory system},
  series = {Journal of bacteriology},
  volume    = {Vol. 180},
  journal   = {Journal of bacteriology},
  number    = {No. 20},
  issn      = {1098-5530 (E-Journal); 0021-9193 (Print)},
  pages     = {5421 -- 5425},
  year      = {1998},
  language  = {en}
}
@article{UndenBongaerts1997,
  author    = {Unden, Gottfried and Bongaerts, Johannes},
  title     = {Alternative respiratory pathways of Escherichia coli: energetics and transcriptional regulation in response to electron acceptors},
  series = {Biochimica et biophysica acta (BBA) - Bioenergetics},
  volume    = {Vol. 1320},
  journal   = {Biochimica et biophysica acta (BBA) - Bioenergetics},
  number    = {Iss. 3},
  issn      = {1879-2650 (E-Journal); 0005-2728 (Print)},
  pages     = {217 -- 234},
  year      = {1997},
  language  = {en}
}
@article{TranBongaertsVladetal.1997,
  author    = {Tran, Quang Hon and Bongaerts, Johannes and Vlad, Dorina and Unden, Gottfried},
  title     = {Requirement for the proton-pumping NADH dehydrogenase I of Escherichia coli in respiration of NADH to fumarate and its bioenergetic implications},
  series = {European journal of biochemistry},
  volume    = {Vol. 244},
  journal   = {European journal of biochemistry},
  number    = {Iss. 1},
  issn      = {0014-2956},
  pages     = {155 -- 160},
  year      = {1997},
  language  = {en}
}
@article{WissenbachSixBongaertsetal.1995,
  author    = {Wissenbach, U. and Six, S. and Bongaerts, Johannes and Ternes, D. and Steinwachs, S. and Unden, G.},
  title     = {A third periplasmic transport system for l-arginine in Escherichia coli: molecular characterization of the artPIQMJ genes, arginine binding and transport},
  series = {Molecular microbiology},
  volume    = {Vol. 17},
  journal   = {Molecular microbiology},
  number    = {Iss. 4},
  issn      = {1365-2958 (E-Journal); 0950-382x (Print)},
  pages     = {675 -- 686},
  year      = {1995},
  language  = {en}
}
@article{UndenBeckerBongaertsetal.1995,
  author    = {Unden, G. and Becker, S. and Bongaerts, Johannes and Holighaus, G. and Schirawski, J. and Six, S.},
  title     = {O2-sensing and O2-dependent gene regulation in facultatively anaerobic bacteria},
  series = {Archives of microbiology},
  volume    = {Vol. 164},
  journal   = {Archives of microbiology},
  number    = {Iss. 2},
  issn      = {1432-072X (E-Journal); 0003-9276 (Print); 0302-8933 (Print)},
  pages     = {81 -- 90},
  year      = {1995},
  language  = {en}
}
@article{BongaertsZoschkeWeidneretal.1995,
  author    = {Bongaerts, Johannes and Zoschke, Sascha and Weidner, Uwe and Linden, Gottfried},
  title     = {Transcriptional regulation of the proton translocating NADH},
  series = {Molecular microbiology},
  volume    = {Vol. 16},
  journal   = {Molecular microbiology},
  number    = {Iss. 3},
  issn      = {1365-2958 (E-Journal); 0950-382x (Print)},
  pages     = {521 -- 534},
  year      = {1995},
  language  = {en}
}
@article{UndenBeckerBongaertsetal.1994,
  author    = {Unden, G. and Becker, S. and Bongaerts, Johannes and Schirawski, J. and Six, S.},
  title     = {Oxygen regulated gene expression in facultatively anaerobic bacteria},
  series = {Antonie van Leeuwenhoek},
  volume    = {Vol. 66},
  journal   = {Antonie van Leeuwenhoek},
  number    = {Iss. 1-3},
  issn      = {0003-6072 (Print) ; 1572-9699 (online)},
  pages     = {3 -- 22},
  year      = {1994},
  language  = {en}
}
@article{Goldbach2010,
  author    = {Goldbach, Daniel},
  title     = {Fahrstabilit{\"a}tserh{\"o}hung bei Gespannen durch Querverschiebung des Anh{\"a}ngerkupplungspunktes},
  series = {mechatronik mobil},
  volume    = {2},
  journal   = {mechatronik mobil},
  number    = {1},
  publisher = {Expert Verlag},
  address   = {Renningen},
  issn      = {1867-7371},
  pages     = {23 -- 29},
  year      = {2010},
  language  = {de}
}
@article{BoehmHellmannsBackesetal.2006,
  author    = {B{\"o}hm, Stefan and Hellmanns, Mark and Backes, Andreas and Dilger, Klaus},
  title     = {Lock-in thermography based NDT of parts for the automotive industry},
  series = {Journal of adhesion and interface},
  volume    = {Vol. 7},
  journal   = {Journal of adhesion and interface},
  number    = {No. 4},
  pages     = {10 -- 12},
  year      = {2006},
  language  = {en}
}
@article{HellmannsBoehmDilger2006,
  author    = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus},
  title     = {Manual applications of adhesives},
  series = {Journal of adhesion and interface},
  volume    = {Vol. 7},
  journal   = {Journal of adhesion and interface},
  number    = {No. 4},
  pages     = {24 -- 27},
  year      = {2006},
  language  = {en}
}
@article{Laack2013,
  author    = {Laack, Walter van},
  title     = {Our world is well ordered in measurement and number : or why natural constants are as they are},
  series = {American Journal of Humanities and Social Sciences (AHSS)},
  volume    = {1},
  journal   = {American Journal of Humanities and Social Sciences (AHSS)},
  number    = {4},
  issn      = {2329-079X},
  doi       = {10.11634/232907811301390},
  pages     = {219 -- 221},
  year      = {2013},
  abstract  = {All the important natural constants can be logically explained with and derived from the first four ordinal numbers, 1, 2, 3 and 4, its addition to ten and finally the standard values for obviously maximal feasibility Ω and the optimum in our world, the Golden Section (GS), i.e. the number sequences 273 and 618. They both are the first three numbers of irrational results by an arithmetical transformation of simple geometrical relationships by creating multiplicity out of singularity. Both of them show that the infinite is inherent in finiteness and explain in a simple way the smallest deviations and fluctuations between the physical AS-IS state and the obvious spiritual ideal behind: Wherever we look in this world, and especially in important key-positions, we regularly find these sequences. All of the above mentioned numbers so seem to be key players in our world, what can be demonstrated by the derivation of natural constants.},
  language  = {en}
}
@article{SchnitzlerBiselli2005,
  author    = {Schnitzler, Thomas and Biselli, Manfred},
  title     = {Cultivo de lineas celulares de hibridoma por CF-10H5 (DSMZ ACC477) en el BIOSTAT B plus},
  series = {Noticias tecnicas del laboratorio},
  volume    = {13},
  journal   = {Noticias tecnicas del laboratorio},
  number    = {3},
  pages     = {7 -- 8},
  year      = {2005},
  language  = {es}
}
@article{Schnitzler2009,
  author    = {Schnitzler, Thomas},
  title     = {Kultivierung der Hybridomazelllinie CF-10H5 (DSMZ ACC477)},
  series = {Application notes / Sartorius stedim biotech},
  journal   = {Application notes / Sartorius stedim biotech},
  publisher = {Sartorius Stedim Biotec},
  address   = {Aubagne},
  year      = {2009},
  language  = {de}
}
@article{Schnitzler2009,
  author    = {Schnitzler, Thomas},
  title     = {Cultivation of hybridoma cell line CF-10H5 (DSMZ ACC477)},
  series = {Application notes / Sartorius stedim biotech},
  journal   = {Application notes / Sartorius stedim biotech},
  pages     = {1 -- 4},
  year      = {2009},
  language  = {en}
}
@article{PoppelWolf2013,
  author    = {Poppel, Kristin Isabel and Wolf, Martin R.},
  title     = {M{\"o}glichkeiten und Potentiale von Revisionsmarketing},
  series = {Zeitschrift Interne Revision : ZIR ; Fachzeitschrift f{\"u}r Wissenschaft und Praxis},
  volume    = {48},
  journal   = {Zeitschrift Interne Revision : ZIR ; Fachzeitschrift f{\"u}r Wissenschaft und Praxis},
  number    = {4},
  publisher = {Erich Schmidt Verlag},
  address   = {Berlin},
  issn      = {0044-3816},
  pages     = {200 -- 208},
  year      = {2013},
  language  = {de}
}
@article{WincklerKruegerSchnitzleretal.2014,
  author    = {Winckler, Silvia and Krueger, Rolf and Schnitzler, Thomas and Zang, Werner and Fischer, Rainer and Biselli, Manfred},
  title     = {A sensitive monitoring system for mammalian cell cultivation processes: a PAT approach},
  series = {Bioprocess and biosystems engineering},
  volume    = {37},
  journal   = {Bioprocess and biosystems engineering},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1615-7591 (Print) 1615-7605 (Online)},
  doi       = {10.1007/s00449-013-1062-8},
  pages     = {901 -- 912},
  year      = {2014},
  abstract  = {Biopharmaceuticals such as antibodies are produced in cultivated mammalian cells, which must be monitored to comply with good manufacturing practice. We, therefore, developed a fully automated system comprising a specific exhaust gas analyzer, inline analytics and a corresponding algorithm to precisely determine the oxygen uptake rate, carbon dioxide evolution rate, carbon dioxide transfer rate, transfer quotient and respiratory quotient without interrupting the ongoing cultivation, in order to assess its reproducibility. The system was verified using chemical simulation experiments and was able to measure the respiratory activity of hybridoma cells and DG44 cells (derived from Chinese hamster ovary cells) with satisfactory results at a minimum viable cell density of ~2.0 × 10⁵ cells ml⁻¹. The system was suitable for both batch and fed-batch cultivations in bubble-aerated and membrane-aerated reactors, with and without the control of pH and dissolved oxygen.},
  language  = {en}
}
@article{Staat2013,
  author    = {Staat, Manfred},
  title     = {Limit and shakedown analysis under uncertainty},
  series = {International journal of computational methods : IJCM},
  journal   = {International journal of computational methods : IJCM},
  publisher = {World Scientific Publishing},
  address   = {Singapore},
  issn      = {0219-8762},
  pages     = {Publ. online},
  year      = {2013},
  language  = {en}
}
@article{MischkeNeuss2009,
  author    = {Mischke, Winfried and Neuß, Frank},
  title     = {F{\"u}hrt die {\"U}bernahme der Domain eines anderen Unternehmers zur Haftung f{\"u}r dessen Schulden nach \S 25 HGB?},
  series = {Zeitschrift f{\"u}r Vertragsgestaltung, Schuld- und Haftungsrecht : ZGS},
  volume    = {8},
  journal   = {Zeitschrift f{\"u}r Vertragsgestaltung, Schuld- und Haftungsrecht : ZGS},
  publisher = {ZAP, Verl. f. die Rechts- und Anwaltspraxis},
  address   = {Recklinghausen},
  issn      = {1619-7011},
  pages     = {407 -- 409},
  year      = {2009},
  language  = {de}
}
@article{MischkeGirkens2011,
  author    = {Mischke, Winfried and Girkens, Hans-Peter},
  title     = {Kostenvorschuss beim selbst{\"a}ndigen Beweisverfahren : zur Kostentragung, wenn der Antragsteller den f{\"u}r die Durchf{\"u}hrung erforderlichen Vorschuss f{\"u}r den Sachverst{\"a}ndigen nicht zahlt},
  series = {Zeitschrift f{\"u}r die Anwaltspraxis : ZAP},
  journal   = {Zeitschrift f{\"u}r die Anwaltspraxis : ZAP},
  number    = {Fach 13},
  publisher = {Westlaw Datenbank GmbH},
  address   = {Frankfurt a. M.},
  issn      = {0936-7292},
  pages     = {1739 -- 1740},
  year      = {2011},
  language  = {de}
}
@article{MartiusMischke2012,
  author    = {Martius, Alexander and Mischke, Winfried},
  title     = {Die Vernehmung des Wohnungseigent{\"u}mers : wann ist der Wohnungseigent{\"u}mer als Partei, wann als Zeuge zu vernehmen?},
  series = {Zeitschrift f{\"u}r die Anwaltspraxis : ZAP},
  journal   = {Zeitschrift f{\"u}r die Anwaltspraxis : ZAP},
  number    = {Fach 7},
  publisher = {ZAP Verlag},
  address   = {Bonn},
  issn      = {0936-7292},
  pages     = {431 -- 434},
  year      = {2012},
  language  = {de}
}
@article{Laack2013,
  author    = {Laack, Walter van},
  title     = {Why natural constants are as they are},
  series = {British journal of arts and social sciences},
  volume    = {Vol. 15},
  journal   = {British journal of arts and social sciences},
  number    = {Nr. 2},
  publisher = {BritishJournal Publ. Inc},
  address   = {London},
  issn      = {2046-9578 (E-Journal)},
  pages     = {198 -- 203},
  year      = {2013},
  language  = {en}
}
@article{Laack2013,
  author    = {Laack, Walter van},
  title     = {Ist der Tod das Ende? In: Sterben - wie f{\"u}hlt sich das an / Ines Elsenhans},
  series = {Via medici : Fachmagazin f{\"u}r junge Mediziner},
  volume    = {Vol. 18},
  journal   = {Via medici : Fachmagazin f{\"u}r junge Mediziner},
  number    = {Ausg. 5},
  publisher = {Thieme},
  address   = {Stuttgart},
  issn      = {0949-2488},
  pages     = {38},
  year      = {2013},
  language  = {de}
}
@article{KernBraun2013,
  author    = {Kern, Alexander and Braun, Christian},
  title     = {Neuerungen bei der Blitzschutznorm. Teil 2},
  series = {etz Elektrotechnik und Automation},
  volume    = {Bd. 134},
  journal   = {etz Elektrotechnik und Automation},
  number    = {H. 8},
  publisher = {VDE-Verlag},
  address   = {Wuppertal},
  issn      = {0170-1711},
  pages     = {66 -- 69},
  year      = {2013},
  language  = {de}
}
@article{IkenAhlbornGerlachetal.2013,
  author    = {Iken, Heiko and Ahlborn, Kristina and Gerlach, Frank and Vonau, Winfried and Zander, Wilhelm and Schubert, J{\"u}rgen P. and Sch{\"o}ning, Michael Josef},
  title     = {Development of redox glasses and subsequent processing by means of pulsed laser deposition for realizing silicon-based thin-film sensors},
  series = {Electrochimica acta},
  journal   = {Electrochimica acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3859 (E-Journal); 0013-4686 (Print)},
  pages     = {Available online 30.8.2013},
  year      = {2013},
  language  = {en}
}
@article{MeyerStorkHoeckerBerndt1992,
  author    = {Meyer-Stork, L. Sebastian and H{\"o}cker, Hartwig and Berndt, Heinz},
  title     = {Syntheses and reactions of urethanes of cellobiose and cellulose-containing uretdione groups},
  series = {Journal of applied polymer science},
  volume    = {44},
  journal   = {Journal of applied polymer science},
  number    = {6},
  issn      = {1097-4628},
  pages     = {1043 -- 1049},
  year      = {1992},
  language  = {en}
}
@article{KaltschmittThraenFredebeulKreinetal.2006,
  author    = {Kaltschmitt, Martin and Thr{\"a}n, Daniela and Fredebeul-Krein, Markus and Vogel, Erika and Kalitzky, Thomas and Ehrhart, Karl Martin and Hoppe, Christian and Seifert, Stefan and Sijm, Jos and B{\"o}hringer, Christoph and Hoffmann, Tim and Moslener, Ulf and Sturm, Bodo and Diekmann, Jochen and Schleich, Joachim},
  title     = {CO2-Emissionshandel},
  series = {Zeitschrift f{\"u}r Energiewirtschaft},
  volume    = {Vol. 30},
  journal   = {Zeitschrift f{\"u}r Energiewirtschaft},
  number    = {Iss. 4},
  issn      = {0343-5377 (Print) 1866-2765 (Online)},
  pages     = {271 -- 314},
  year      = {2006},
  language  = {de}
}
@article{MerschenzQuack1991,
  author    = {Merschenz-Quack, Angelika},
  title     = {Betriebsanweisungen beim Umgang mit Gefahrstoffen},
  series = {Elektro-Praktiker : Fachzeitschrift f{\"u}r Handwerk und Industrie},
  volume    = {Bd. 45},
  journal   = {Elektro-Praktiker : Fachzeitschrift f{\"u}r Handwerk und Industrie},
  number    = {H. 10},
  issn      = {0013-5569},
  pages     = {644 -- 649},
  year      = {1991},
  language  = {de}
}
@article{MootzMerschenzQuack1987,
  author    = {Mootz, D. and Merschenz-Quack, Angelika},
  title     = {Zur Kenntnis der h{\"o}chsten Hydrate der Schwefels{\"a}ure: Bildung und Struktur von H2SO4·6,5 H2O und H2SO4·8H2O},
  series = {Zeitschrift f{\"u}r Naturforschung B: Journal of chemical sciences},
  volume    = {42},
  journal   = {Zeitschrift f{\"u}r Naturforschung B: Journal of chemical sciences},
  number    = {H. 10},
  issn      = {1865-7117 (E-Journal); 0932-0776 (Print)},
  pages     = {1231 -- 1236},
  year      = {1987},
  language  = {de}
}
@article{HemmerlingMerschenzQuackWunderlich1988,
  author    = {Hemmerling, H.-J. and Merschenz-Quack, Angelika and Wunderlich, H.},
  title     = {Crystal structures of indeno[1,2-d]imidazoles. XIth European Crystallographic Meeting, Vienna 1988},
  series = {Zeitschrift f{\"u}r Kristallographie - Crystalline Materials},
  volume    = {185},
  journal   = {Zeitschrift f{\"u}r Kristallographie - Crystalline Materials},
  number    = {H. 1-4},
  issn      = {2196-7105 (E-Books); 2194-4946 (Print)},
  pages     = {256},
  year      = {1988},
  language  = {en}
}
@article{RamazaniLiMukherjeeetal.2013,
  author    = {Ramazani, Ali and Li, Yang and Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Abdurakhmanov, Aydemir and Schleser, Markus and Reisgen, Uwe},
  title     = {Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding},
  series = {Computational materials science},
  volume    = {Vol. 68},
  journal   = {Computational materials science},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0801 (E-Book); 0927-0256 (Print)},
  pages     = {107 -- 116},
  year      = {2013},
  language  = {en}
}
@article{ReisgenSchleserSchiebahn2013,
  author    = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander},
  title     = {Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 65},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 6},
  publisher = {DVS Verl.},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {309 -- 313},
  year      = {2013},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian},
  title     = {Modelling and visualisation of the GMA process},
  series = {Welding and Cutting},
  volume    = {11},
  journal   = {Welding and Cutting},
  number    = {4},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {1612-3433},
  pages     = {242 -- 249},
  year      = {2012},
  language  = {en}
}
@article{ScheikSchleserReisgen2012,
  author    = {Scheik, Sven and Schleser, Markus and Reisgen, Uwe},
  title     = {Thermisches Direktf{\"u}gen von Metall und Kusntstoff: eine Alternative zur Klebtechnik},
  series = {Adh{\"a}sion : Kleben \& Dichten},
  volume    = {56},
  journal   = {Adh{\"a}sion : Kleben \& Dichten},
  number    = {11},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0001-8198 (E-Journal); 0001-8198 (Print)},
  doi       = {10.1007/s35145-012-0005-x},
  pages     = {36 -- 40},
  year      = {2012},
  abstract  = {Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder" der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktf{\"u}gen, das eine stoffschl{\"u}ssige Verbindung zwischen Kunststoff und Metall erm{\"o}glicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian},
  title     = {Modellierung und Visualisierung der MSG-Lichtbogenprozesse},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {64},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {4},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {166 -- 174},
  year      = {2012},
  language  = {de}
}
@article{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrey},
  title     = {Measuring of plasma properties induced by non-vacuum electron beam welding},
  series = {Physics of plasma},
  volume    = {19},
  journal   = {Physics of plasma},
  number    = {1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {1089-7674 (E-Journal); 1070-664X (Print)},
  doi       = {10.1063/1.3675874},
  pages     = {1 -- 7},
  year      = {2012},
  abstract  = {Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel's method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.},
  language  = {en}
}
@article{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Turichin, Gleb and Valdaitseva, Elena and Bach, Friedrich-Wilhelm and Hassel, Thomas and Beniyashi, Alexander},
  title     = {Investigation of factors influencing the formation of weld defects in non-vacuum electron beam welding},
  series = {The Paton welding journal},
  volume    = {2012},
  journal   = {The Paton welding journal},
  number    = {2},
  publisher = {Paton Publishing House},
  address   = {Kiev},
  issn      = {0957-798X},
  pages     = {11 -- 18},
  year      = {2012},
  abstract  = {The influence of welding condition parameters and properties of material on formation of defects, such as humping and undercuts, in non-vacuum electron beam welding was investigated. The influence of separate welding parameters on the quality of welds was determined.},
  language  = {en}
}
@article{ReisgenOlschokJakobsetal.2012,
  author    = {Reisgen, Uwe and Olschok, Simon and Jakobs, Stefan and Schleser, Markus and Mokrov, Oleg and Rossiter, Eduardo},
  title     = {Laser beam submerged arc hybrid welding},
  series = {Physics procedia},
  volume    = {39},
  journal   = {Physics procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.016},
  pages     = {75 -- 83},
  year      = {2012},
  abstract  = {The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Optimization of laser welding of DP/TRIP steel sheets using statistical approach},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.06.028},
  pages     = {255 -- 262},
  year      = {2012},
  abstract  = {Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box-Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Statistical modeling of laser welding of DP/TRIP steel sheets},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.05.025},
  pages     = {92 -- 101},
  year      = {2012},
  abstract  = {In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box-Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander},
  title     = {Virtual welding equipment for simulation of GMAW processes with integration of power source regulation},
  series = {Frontiers of materials science},
  volume    = {Vol. 5},
  journal   = {Frontiers of materials science},
  number    = {Iss. 2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2095-0268 (E-Journal); 2095-025X (Print)},
  pages     = {79 -- 89},
  year      = {2011},
  language  = {en}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Reisgen, Uwe and Schleser, Markus},
  title     = {Laser assisted joining of plastic metal hybrids},
  series = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)},
  journal   = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  organization    = {International WLT Conference on Lasers in Manufacturing <6, M{\"u}nchen, 2011>},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  pages     = {370 -- 377},
  year      = {2011},
  language  = {en}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative approach of joining hybrid components},
  series = {Journal of laser applications},
  volume    = {Vol. 23},
  journal   = {Journal of laser applications},
  number    = {Iss. 3},
  publisher = {Laser Institute of America},
  address   = {Orlando, Fla.},
  issn      = {1042-346X},
  pages     = {32007},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserHarmsetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Thiele, Regina},
  title     = {Elektromobilit{\"a}t - Herausforderungen an die F{\"u}getechnik},
  series = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t},
  volume    = {Jg. 1},
  journal   = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t},
  number    = {Nr. 2},
  editor    = {Kampker, Achim},
  pages     = {16 -- 17},
  year      = {2011},
  language  = {de}
}
@article{ReisgenSchleserHarmsetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Naumov, Andreas},
  title     = {Erweiterung des Parameterfelds zum R{\"u}hrreibschweißen mittels konduktiver Unterst{\"u}tzung},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 63},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 12},
  publisher = {DVS-Media GmbH},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {710 -- 714},
  year      = {2011},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel},
  series = {ISIJ international},
  volume    = {Vol. 51},
  journal   = {ISIJ international},
  number    = {No. 3},
  publisher = {ISIJ},
  address   = {Tōkyō},
  organization    = {Iron and Steel Institute of Japan (ISIJ)},
  issn      = {1347-5460 (E-Journal); 0915-1559 (Print)},
  pages     = {429 -- 434},
  year      = {2011},
  language  = {en}
}
@article{GlowaniaGriesSchoeneetal.2011,
  author    = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative coating technology for textile reinforcements of concrete applications},
  series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  journal   = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  organization    = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>},
  isbn      = {978-3-03785-008-4},
  issn      = {1013-9826 (E-Journal) ; 0252-1059 (Print)},
  pages     = {167 -- 173},
  year      = {2011},
  language  = {en}
}
@article{MukherjeeRamazaniYangetal.2011,
  author    = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization of gas metal arc welded hot rolled DP600 steel},
  series = {Steel research international},
  volume    = {Vol. 82},
  journal   = {Steel research international},
  number    = {Iss. 12},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1869-344X (E-Book); 1611-3683 (Print)},
  pages     = {1408 -- 1416},
  year      = {2011},
  language  = {en}
}