@article{MukherjeePrahlBlecketal.2010,
  author    = {Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  doi       = {10.1002/mawe.201000692},
  pages     = {972 -- 983},
  year      = {2010},
  abstract  = {The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets},
  series = {Journal of materials processing technology},
  volume    = {210},
  journal   = {Journal of materials processing technology},
  number    = {15},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-0136},
  doi       = {http10.1016/j.jmatprotec.2010.08.003},
  pages     = {2188 -- 2196},
  year      = {2010},
  abstract  = {Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking-Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels},
  series = {Applied surface science},
  volume    = {257},
  journal   = {Applied surface science},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-4332 (E-Journal); 0169-4332 (Print)},
  doi       = {10.1016/j.apsusc.2010.08.042},
  pages     = {1401 -- 1406},
  year      = {2010},
  abstract  = {The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.},
  language  = {en}
}
@article{AhmedReisgenSchleseretal.2010,
  author    = {Ahmed, Essam and Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg},
  title     = {On formability of tailor laser welded blanks of DP/TRIP steel sheets},
  series = {Science and technology of welding and joining},
  volume    = {15},
  journal   = {Science and technology of welding and joining},
  number    = {5},
  publisher = {Maney},
  address   = {Leeds},
  issn      = {1743-2936},
  doi       = {10.1179/136217110X12731414739754},
  pages     = {337 -- 342},
  year      = {2010},
  abstract  = {This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.},
  language  = {en}
}
@article{ReisgenSchleserJerabeketal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav},
  title     = {Messung der Strahlqualit{\"a}t einer Elektronenstrahlanlage in Umgebungsatmosph{\"a}re},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {1},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  pages     = {45 -- 52},
  year      = {2010},
  abstract  = {In den letzten Jahrzehnten hat das Elektronenstrahlschweißen, das bereits im gr{\"o}ßeren Maßstab verwendet wird, seine F{\"a}higkeit als qualitatives Werkzeug f{\"u}r die Verbindung verschiedener Materialen nachgewiesen. Das Non Vacuum Electron Beam Welding (NV-EBW) hat zahlreiche Vorteile im Vergleich zum Elektronenstrahlschweißen im Vakuum, da man unter normalem Atmosph{\"a}rendruck arbeiten kann. Im Hinblick auf die reproduzierbare Qualit{\"a}t, insbesondere im Bereich der Massen-Fertigung, ist die Kontrolle der Strahlparameter sowie deren Einfluss auf das Schweißergebnis von großer Bedeutung. Durch eine genaue Kenntnis der Strahlkenngr{\"o}ßen wie des Strahldurchmessers und der Leistungsdichteverteilung kann eine Aussage {\"u}ber die sich ausbildende Schweißnaht sowie die Schweißbaddynamik getroffen werden. Messungen der Strahlkenngr{\"o}ßen im Prozess erlauben insbesondere die Untersuchung von Humping-Effekten. In diesem Beitrag wird der Prozess der Elektronenstrahlvermessung unter atmosph{\"a}rischen Bedingungen beschrieben. Es wird zudem die Abh{\"a}ngigkeit der Elektronenstrahlcharakteristika von den verschiedenen Prozessparametern dargestellt.},
  language  = {de}
}
@article{ReisgenSchleserFeldmannetal.2008,
  author    = {Reisgen, Uwe and Schleser, Markus and Feldmann, Martin and Pak, Daniel and Geßler, Achim},
  title     = {Kleben d{\"u}nnwandiger Bauteile aus textilbewehrtem Beton},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 60},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 7/8},
  issn      = {0036-7184},
  pages     = {408 -- 412},
  year      = {2008},
  language  = {de}
}
@article{DiltheySchleserFeldmannetal.2008,
  author    = {Dilthey, Ulrich and Schleser, Markus and Feldmann, Martin and Pak, Daniel and Geßler, Achim},
  title     = {Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts},
  series = {Cement and concrete composites},
  volume    = {Vol. 30},
  journal   = {Cement and concrete composites},
  number    = {iss. 2},
  issn      = {0958-9465},
  pages     = {82 -- 87},
  year      = {2008},
  language  = {en}
}
@article{FeldmannPakGessleretal.2008,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Schleser, Markus},
  title     = {Entwicklung eines Bemessungsmodells f{\"u}r punktf{\"o}rmige Verbindungen textibewehrter Betonbauteile},
  series = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  volume    = {Bd. 85},
  journal   = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  number    = {2},
  issn      = {0005-6820, 0341-1052, 0932-6359, 0932-8351, 0932-8351},
  pages     = {143 -- 147},
  year      = {2008},
  language  = {de}
}
@article{FeldmannPakGessleretal.2006,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Dilthey, Ulrich and Schleser, Markus},
  title     = {Bonded connections for textile reinforced concrete structures},
  series = {Cailiao-gongcheng = Journal of materials engineering},
  journal   = {Cailiao-gongcheng = Journal of materials engineering},
  number    = {Special iss.},
  issn      = {1001-4381},
  pages     = {123 -- 127},
  year      = {2006},
  language  = {en}
}
@article{SchleserWalkLaufferRaupachetal.2006,
  author    = {Schleser, Markus and Walk-Lauffer, Bernd and Raupach, Michael and Dilthey, Ulrich},
  title     = {Application of polymers for textile-reinforced concrete},
  series = {Journal of materials in civil engineering : properties, applications, durability},
  volume    = {18},
  journal   = {Journal of materials in civil engineering : properties, applications, durability},
  number    = {5},
  issn      = {0899-1561},
  pages     = {670 -- 676},
  year      = {2006},
  language  = {en}
}
@article{AgrafiotisMavroidisKonstandopoulosetal.2007,
  author    = {Agrafiotis, Christos C. and Mavroidis, Ilias and Konstandopoulos, Athansios G. and Hoffschmidt, Bernhard and Stobbe, Per and Romero, Manuel and Fernandez-Quero, Valerio},
  title     = {Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation},
  series = {Solar energy materials and solar cells},
  volume    = {Vol. 91},
  journal   = {Solar energy materials and solar cells},
  number    = {Iss. 6},
  issn      = {1879-3398 (E-Journal); 0927-0248 (Print)},
  pages     = {474 -- 488},
  year      = {2007},
  language  = {en}
}
@article{DiltheySchleserHanischetal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hanisch, Vera and Gries, Thomas},
  title     = {Garnzugpr{\"u}fung polymergetr{\"a}nkter Textilien f{\"u}r die Bewehrung von Beton},
  series = {Technische Textilien},
  volume    = {49},
  journal   = {Technische Textilien},
  number    = {1},
  issn      = {0323-3243},
  pages     = {48 -- 50},
  year      = {2006},
  language  = {de}
}
@article{DiltheySchleserGessleretal.2005,
  author    = {Dilthey, Ulrich and Schleser, Markus and Geßler, Achim and Rettweiler, Timo and V{\"o}lling, Boris},
  title     = {Kleben textilbewehrter Betonbauteile},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8},
  issn      = {0036-7184},
  pages     = {373 -- 377},
  year      = {2005},
  language  = {de}
}
@article{SedlacekSchaetzkeGessleretal.2004,
  author    = {Sedlacek, G. and Sch{\"a}tzke, C. and Geßler, M. and Schleser, Markus},
  title     = {F{\"u}gen von Bauteilen aus textilbewehrtem Beton},
  series = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  journal   = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  issn      = {0005-6650},
  pages     = {569 -- 575},
  year      = {2004},
  language  = {de}
}
@article{DiltheyBrandenburgSchleser2004,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Dispensing and application of unfilled adhesives in the micro range},
  series = {Welding and cutting. 3 (2004), H. 4},
  journal   = {Welding and cutting. 3 (2004), H. 4},
  issn      = {1612-3433},
  pages     = {250 -- 254},
  year      = {2004},
  language  = {en}
}
@article{MelissWindheim1977,
  author    = {Meliß, Michael and Windheim, R.},
  title     = {Energiequelle f{\"u}r morgen : M{\"o}glichkeiten und Grenzen der Windenergienutzung - ein Statusbericht},
  series = {VDI-Nachrichten. Bd. 31 (1977), H. 22},
  journal   = {VDI-Nachrichten. Bd. 31 (1977), H. 22},
  issn      = {0042-1758},
  pages     = {37 -- 38},
  year      = {1977},
  language  = {de}
}
@article{MelissBuende1978,
  author    = {Meliß, Michael and B{\"u}nde, R.},
  title     = {Unkonventionelle Energiequellen - Entwicklungsstudien (4)},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK},
  volume    = {30},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK},
  number    = {3},
  publisher = {Springer-VDI-Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {120 -- 126},
  year      = {1978},
  language  = {de}
}
@article{Meliss1978,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK},
  volume    = {30},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK},
  number    = {4},
  publisher = {Springer-VDI-Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {151 -- 156},
  year      = {1978},
  language  = {de}
}
@article{Meliss1979,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 31 (1979), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 31 (1979), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {147 -- 154},
  year      = {1979},
  language  = {de}
}
@article{SteinMeliss1980,
  author    = {Stein, H. and Meliß, Michael},
  title     = {Die Bedeutung der Sonnenenergie f{\"u}r die zuk{\"u}nftige Energieversorgung der Bundesrepublik Deutschland},
  series = {Din-Mitteilungen + Elektronorm. Bd. 59 (1980), H. 8},
  journal   = {Din-Mitteilungen + Elektronorm. Bd. 59 (1980), H. 8},
  issn      = {0722-2912},
  pages     = {434 -- 440},
  year      = {1980},
  language  = {de}
}
@article{Meliss1981,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 33 (1981), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 33 (1981), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {138 -- 145},
  year      = {1981},
  language  = {de}
}
@article{Meliss1982,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 34 (1982), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 34 (1982), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {182 -- 189},
  year      = {1982},
  language  = {de}
}
@article{Meliss1983,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 35 (1983), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 35 (1983), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {150 -- 155},
  year      = {1983},
  language  = {de}
}
@article{Meliss1984,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 36 (1984), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 36 (1984), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {134 -- 139},
  year      = {1984},
  language  = {de}
}
@article{Meliss1985,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 37 (1985), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 37 (1985), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {145 -- 150},
  year      = {1985},
  language  = {de}
}
@article{Meliss1986,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiesysteme (Teil 2)},
  series = {Neue Deliwa-Zeitschrift. Bd. 37 (1986) Heft 1},
  journal   = {Neue Deliwa-Zeitschrift. Bd. 37 (1986) Heft 1},
  issn      = {0369-383x},
  pages     = {14 -- 19},
  year      = {1986},
  language  = {de}
}
@article{Meliss1985,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiesysteme. Teil 1},
  series = {Neue Deliwa-Zeitschrift. Bd. 36 (1985) Heft 12},
  journal   = {Neue Deliwa-Zeitschrift. Bd. 36 (1985) Heft 12},
  issn      = {0369-383x},
  pages     = {568 -- 572},
  year      = {1985},
  language  = {de}
}
@article{Meliss1989,
  author    = {Meliß, Michael},
  title     = {Photovoltaik bietet gr{\"o}ßtes Potential. NRW-Forschungs- und Entwicklungsarbeiten bereits heute anerkennenswert},
  series = {Energie : das Magazin f{\"u}r Wirtschaft, Forschung, Technik, Umwelt. Bd. 41 (1989), H. 12},
  journal   = {Energie : das Magazin f{\"u}r Wirtschaft, Forschung, Technik, Umwelt. Bd. 41 (1989), H. 12},
  issn      = {0013-7359},
  pages     = {32 -- 41},
  year      = {1989},
  language  = {de}
}
@article{Meliss1989,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen. Technischer Stand und Wirtschaftlichkeit},
  series = {Energiewirtschaftliche Tagesfragen. Jg. 39 (1989), H. 1/2},
  journal   = {Energiewirtschaftliche Tagesfragen. Jg. 39 (1989), H. 1/2},
  issn      = {0013-743X ; 0720-6240},
  pages     = {18 -- 25},
  year      = {1989},
  language  = {de}
}
@article{VelrajSeenirajHafneretal.1999,
  author    = {Velraj, R. and Seeniraj, R. V. and Hafner, B. and Faber, Christian and Schwarzer, Klemens},
  title     = {Heat transfer enhancement in a latent heat storage system},
  series = {Solar energy. Vol. 65, iss. 3},
  journal   = {Solar energy. Vol. 65, iss. 3},
  issn      = {0038-092X},
  pages     = {171 -- 180},
  year      = {1999},
  language  = {en}
}
@article{SchwarzerVieiradaSilvaSchwarzer2011,
  author    = {Schwarzer, Klemens and Vieira da Silva, Maria Eugenia and Schwarzer, Tarik},
  title     = {Field results in Namibia and Brazil of the new solar desalination system for decentralised drinking water production},
  series = {Desalination and water treatment. Vol. 31 (2011), iss. 1-3: selected papers presented at EuroMed 2010 — Desalination for Clean Water and Energy: Cooperation among Mediterranean Countries of Europe and MENA Region, 3-7 October 2010, Tel Aviv, Israel},
  journal   = {Desalination and water treatment. Vol. 31 (2011), iss. 1-3: selected papers presented at EuroMed 2010 — Desalination for Clean Water and Energy: Cooperation among Mediterranean Countries of Europe and MENA Region, 3-7 October 2010, Tel Aviv, Israel},
  pages     = {379 -- 386},
  year      = {2011},
  language  = {en}
}
@article{SchusserMenzelBaeckeretal.2013,
  author    = {Schusser, Sebastian and Menzel, S. and B{\"a}cker, Matthias and Leinhos, Marcel and Poghossian, Arshak and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {Degradation of thin poly(lactic acid) films: characterization by capacitance-voltage, atomic force microscopy, scanning electron microscopy and contact-angle measurements},
  series = {Electrochimica Acta},
  volume    = {Vol. 113},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3859 (E-Journal); 0013-4686 (Print)},
  pages     = {779 -- 784},
  year      = {2013},
  language  = {en}
}
@article{KollSchwarzboezlHenneckeetal.2009,
  author    = {Koll, G. and Schwarzb{\"o}zl, P. and Hennecke, K. and Hoffschmidt, Bernhard and Hartz, T.},
  title     = {Geb{\"u}ndelte Kraft: das solarthermische Versuchskraftwerk J{\"u}lich},
  series = {BWK : das Energie-Fachmagazin / Hrsg.: Verein Deutscher Ingenieure. Jg. 61 (2009), Nr. 9},
  journal   = {BWK : das Energie-Fachmagazin / Hrsg.: Verein Deutscher Ingenieure. Jg. 61 (2009), Nr. 9},
  publisher = {Springer-VDI-Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0006-9612},
  pages     = {60 -- 62},
  year      = {2009},
  language  = {de}
}
@article{KrokerFaberTrinkletal.2008,
  author    = {Kroker, J. and Faber, Christian and Trinkl, C. and Z{\"o}rner, W.},
  title     = {Der Garten bleibt - solares Heizen mit W{\"a}rmepumpe und Latentw{\"a}rmespeicher verzichtet auf großfl{\"a}chige Erdw{\"a}rmetauscher},
  series = {Erneuerbare Energien : das Magazin. 18 (2008), H. 8},
  journal   = {Erneuerbare Energien : das Magazin. 18 (2008), H. 8},
  issn      = {1436-8773},
  pages     = {46 -- 49},
  year      = {2008},
  language  = {de}
}
@article{Timme2013,
  author    = {Timme, Michael},
  title     = {Begrenzung von Mietb{\"u}rgschaften gem. \S 551 Abs. 4 BGB?},
  series = {Der Miet-Rechts-Berater : MietRB},
  journal   = {Der Miet-Rechts-Berater : MietRB},
  number    = {8},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {1612-040X},
  pages     = {248 -- 249},
  year      = {2013},
  language  = {de}
}
@article{Timme2013,
  author    = {Timme, Michael},
  title     = {Begrenzung von Mietb{\"u}rgschaften gem. \S 551 Abs. 4 BGB?},
  series = {Monatsschrift f{\"u}r deutsches Recht : MdR},
  volume    = {16},
  journal   = {Monatsschrift f{\"u}r deutsches Recht : MdR},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812 (Print) ; 2194-4202 (E-Journal)},
  pages     = {948 -- 949},
  year      = {2013},
  language  = {de}
}
@article{DietzelWeberPorschenetal.1976,
  author    = {Dietzel, F. and Weber, Hans-Joachim and Porschen, W. and Feinendegen, L. E.},
  title     = {Zur W{\"a}rmeempfindlichkeit von oxischen und hypoxischen Zellen in einem Tumor},
  series = {Naturwissenschaften},
  volume    = {63},
  journal   = {Naturwissenschaften},
  number    = {12},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {0028-1042},
  doi       = {10.1007/BF00622808},
  pages     = {585 -- 586},
  year      = {1976},
  language  = {de}
}
@article{PorschenGartzenGewehretal.1978,
  author    = {Porschen, W. and Gartzen, J. and Gewehr, K. and M{\"u}hlensiepen, H. and Weber, Hans-Joachim and Feinedegen, L E.},
  title     = {In vivo assay of the radiation sensitivity of hypoxic tumour cells : influence of γ-rays, cyclotron neutrons, misonidazole, hyperthermia and mixed modalities},
  series = {The British journal of cancer / Supplement},
  journal   = {The British journal of cancer / Supplement},
  number    = {3},
  publisher = {Lewis},
  address   = {London},
  issn      = {0306-9443},
  pages     = {194 -- 197},
  year      = {1978},
  abstract  = {Tumour cell death can be evaluated in the living mouse by externally measuring the rate of loss of tumour-bound DNA tracer. By sequentially labelling the tumour-bearing animals with ¹²⁵IUdR and ¹³¹IUdR 50 h apart, the average tumour cells at the time of the second injection are labelled by ¹²⁵IUdR and the euoxic tumour cells are specifically labelled with ¹³¹IUdR. Tumour treatment at this stage of labelling permits the observation of the reaction of euoxic cells and average tumour cells and finally yields data on hypoxic cells and thus on the oxygen enhancement ratio. This information adds to results from tumour control and growth delay. With this technique effects were analysed of 60-Co γ-rays, cyclotron neutrons (E = 6 MeV), misonidazole (500 mg/kg body wt) and hyperthermia (42°C water-bath), or combinations of these. Misonidazole (15 min before irradiation) altered the oxygen enhancement ratio by a factor of 1·5 for γ-rays and of 1·1 for neutrons; when evaluated from tumour-growth delay and TCD-50 misonidazole gave a dose modifying factor of 1·47 for γ-rays and of 1·2-1·3 for neutrons. Based on percentage tumour regression 100 days after treatment, the enhancement ratio from hyperthermia (after irradiation) was 2·75 for γ-rays (at 10 Gray) and 2·2 for neutrons (at 3·2 Gray). For neutrons combined with misonidazole and hyperthermia the ratio was 2·4. These results demonstrate that effects of neutron irradiation may be modified by electron-affinic substances and/or hyperthermia.},
  language  = {en}
}
@article{AnikFrohbergKapoor1982,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Untersuchungen zum thermodynamischen Verhalten des Sauerstoffs in Kupfer-Wismut-Schmelzen bei 1200°C},
  series = {Zeitschrift f{\"u}r Physikalische Chemie},
  volume    = {133},
  journal   = {Zeitschrift f{\"u}r Physikalische Chemie},
  number    = {2},
  issn      = {0942-9352},
  pages     = {167 -- 174},
  year      = {1982},
  language  = {de}
}
@article{AnikDagsoez1971,
  author    = {Anik, Sabri and Dagsoez, A. K.},
  title     = {Feinbleche schweißen : die Temperaturverteilung in d{\"u}nnen Stahlblechplatten beim Lichtbogenschweißen},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {63},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {9},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {57 -- 59},
  year      = {1971},
  language  = {de}
}
@article{AnikTuelbentci1974,
  author    = {Anik, Sabri and Tuelbentci, K.},
  title     = {Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 3},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {66},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {2},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {43 -- 47},
  year      = {1974},
  language  = {de}
}
@article{AnikTuelbentci1973,
  author    = {Anik, Sabri and Tuelbentci, K.},
  title     = {Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 2},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {65},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {52},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {9 -- 13},
  year      = {1973},
  language  = {de}
}
@article{AnikTuelbentci1973,
  author    = {Anik, Sabri and Tuelbentci, K.},
  title     = {Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke beim Lichtbogenschweißen ; Teil 1},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {65},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {48},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {13 -- 15},
  year      = {1973},
  language  = {de}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallschichten : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {39},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {37 -- 41},
  year      = {1978},
  language  = {de}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallbeschichtungen : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {26},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {9 -- 13},
  year      = {1978},
  language  = {de}
}
@article{FrohbergAnik1986,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Experimentelle Ergebnisse zum L{\"o}sungsverhalten von Sauerstoff in den Systemen Cu-O-Bi und Cu-O-Pb},
  series = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  volume    = {31},
  journal   = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  number    = {9},
  issn      = {0028-3207},
  pages     = {344 -- 347},
  year      = {1986},
  language  = {de}
}
@article{FrohbergAnik1986,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Untersuchungen zum L{\"o}sungsverhalten von Sauerstoff in Metallschmelzen},
  series = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  volume    = {31},
  journal   = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  number    = {7},
  issn      = {0028-3207},
  pages     = {255 -- 258},
  year      = {1986},
  language  = {de}
}
@article{WangAnikFrohberg1987,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics of oxygen in the lead-antimony system at 1173 K},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {40},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {6},
  issn      = {0044-2658},
  pages     = {316 -- 319},
  year      = {1987},
  language  = {en}
}
@article{AnikFrohberg1988,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics of oxygen in the copper-antimony system at 1473K},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {41},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {10},
  issn      = {0044-2658},
  pages     = {498 -- 501},
  year      = {1988},
  language  = {en}
}
@article{WemhoenerHafnerSchwarzer2000,
  author    = {Wemh{\"o}ner, Carsten and Hafner, Bernd and Schwarzer, Klemens},
  title     = {Simulation of solar thermal systems with CARNOT blockset in the environment MATLAB-Simulink},
  pages     = {1 -- 6},
  year      = {2000},
  language  = {en}
}