@article{TippkoetterWollnyKampeisetal.2011,
  author    = {Tippk{\"o}tter, Nils and Wollny, S. and Kampeis, P. and Oster, J. and Schneider, H. and Ulber, R.},
  title     = {Magnetseparation von Proteinen : Separation von Zielmolek{\"u}len durch hochselektive Aptamere},
  series = {GIT Labor-Fachzeitschrift},
  volume    = {55},
  journal   = {GIT Labor-Fachzeitschrift},
  number    = {10},
  publisher = {Wiley},
  address   = {Weinheim},
  pages     = {666},
  year      = {2011},
  abstract  = {Durch die Kombination von Oligonukleotid-Liganden (Aptameren) hoher Bindungsaffinit{\"a}ten mit hochselektiv abtrennbaren magnetisierbaren Mikropartikeln wird eine einstufige Separation von Zielmolek{\"u}len aus mikrobiologischen Produktionsans{\"a}tzen m{\"o}glich. Die Aptamere werden hierf{\"u}r reversibel auf den Partikeloberfl{\"a}chen gebunden und f{\"u}r die spezifische Isolierung von Bioprodukten eingesetzt. Die Abtrennung der beladenen Partikel erfolgt durch einen neuen Rotor-Stator-Separator mit Hochgradient-Magnetfeld.},
  language  = {de}
}
@article{Hebel2017,
  author    = {Hebel, Christoph},
  title     = {Erfahrungen mit der RIN und aktuelle Weiterentwicklungen},
  series = {Straßenverkehrstechnik: Organ der Forschungsgesellschaft f{\"u}r Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der {\"O}sterreichischen Forschungsgesellschaft Straße und Verkehr; Zeitschrift f{\"u}r Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik},
  volume    = {61},
  journal   = {Straßenverkehrstechnik: Organ der Forschungsgesellschaft f{\"u}r Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der {\"O}sterreichischen Forschungsgesellschaft Straße und Verkehr; Zeitschrift f{\"u}r Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik},
  number    = {7},
  publisher = {Kirschbaum-Verlag},
  address   = {Bonn},
  issn      = {0039-2219},
  pages     = {443 -- 448},
  year      = {2017},
  language  = {de}
}
@article{KapplerTanudyayaSchmittTippkoetteretal.2007,
  author    = {Kappler-Tanudyaya, Nathalie and Schmitt, Heike and Tippk{\"o}tter, Nils and Meyer, Lina and Lenzen, Sigurd and Ulber, Roland},
  title     = {Combination of biotransformation and chromatography for the isolation and purification of mannoheptulose},
  series = {Biotechnology Journal},
  volume    = {2},
  journal   = {Biotechnology Journal},
  number    = {6},
  issn      = {1860-7314},
  doi       = {10.1002/biot.200700004},
  pages     = {692 -- 699},
  year      = {2007},
  abstract  = {Mannoheptulose is a seven-carbon sugar. It is an inhibitor of glucose-induced insulin secretion due to its ability to selectively inhibit the enzyme glucokinase. An improved procedure for mannoheptulose isolation from avocados is described in this study (based upon the original method by La Forge). The study focuses on the combination of biotransformation and downstream processing (preparative chromatography) as an efficient method to produce a pure extract of mannoheptulose. The experiments were divided into two major phases. In the first phase, several methods and parameters were compared to optimize the mannoheptulose extraction with respect to efficiency and purity. In the second phase, a mass balance of mannoheptulose over the whole extraction process was undertaken to estimate the yield and efficiency of the total extraction process. The combination of biotransformation and preparative chromatography allowed the production of a pure mannoheptulose extract. In a biological test, the sugar inhibited the glucokinase enzyme activity efficiently.},
  language  = {en}
}
@article{TippkoetterDeterdingUlber2008,
  author    = {Tippk{\"o}tter, Nils and Deterding, A. and Ulber, Roland},
  title     = {Determination of acetic acid in fermentation broth by gas-diffusion technique},
  series = {Engineering in Life Sciences},
  volume    = {8},
  journal   = {Engineering in Life Sciences},
  number    = {1, Special Issue: Technical Systems for the Use in Life Sciences},
  doi       = {10.1002/elsc.200820227},
  pages     = {62 -- 67},
  year      = {2008},
  abstract  = {Due to the interfering effects of acetic acid in many fermentation processes, a gas-diffusion technique was developed for the online determination of acetic acid. The measurements were accomplished with a flow diffusion analysis (FDA) unit from the TRACE Analytics GmbH, Braunschweig, Germany. The diffusion analysis is based on the UV-absorbance of acetic acid at 205 nm. The measurement was achieved by the separation of an acceptor and a carrier stream (acidified fermentation broth) using a gas permeable polytetrafluoroethylene (PTFE) membrane, whereby broth constituents that would otherwise disturb the UV-measurement of acetic acid, are held back efficiently. Merely, the fermentation by-products, e.g. formic acid, is capable of diffusing through the membrane. While formic acid can disturb the measurement, carbon dioxide does not absorb at 205 nm. The method operates with time-dependent sample enrichment. During the analysis, a small volume of the acceptor stream is stopped for a defined time interval in the acceptor chamber. During this period, the gaseous acetic acid diffuses through the membrane and is enriched in the acceptor chamber. Subsequently after the enrichment, the acceptor stream flows through a UV-detector. The intensity of the signal is proportional to the acetic acid concentration. Online measurements in bioreactors via a sterile filtration probe have been accomplished. A linear calibration in the range of 0.5-5.0 g/L acetic acid with a relative standard deviation of <5 \% was obtained. A sampling rate of 8 samples per hour was possible. The system was applied for the determination of acetic acid in E. coli fermentation broth. The instrument is easy to clean, very user-friendly and does not require any toxic or expensive reagents.},
  language  = {en}
}
@article{GrafSteinhofLotzetal.2009,
  author    = {Graf, Alain-Michel and Steinhof, Rafael and Lotz, Martin and Tippk{\"o}tter, Nils and Kasper, Cornelia and Beutel, Sascha and Ulber, Roland},
  title     = {Downstream-Processing mit Membranadsorbern zur Isolierung nativer Proteinfraktionen aus Kartoffelfruchtwasser},
  series = {Chemie Ingenieur Technik},
  volume    = {81},
  journal   = {Chemie Ingenieur Technik},
  number    = {3},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/cite.200800139},
  pages     = {267 -- 274},
  year      = {2009},
  abstract  = {Bei der St{\"a}rkeproduktion entstehendes Kartoffelfruchtwasser besitzt mit 2 - 3 \% einen hohen Anteil an ern{\"a}hrungsphysiologisch interessanten Proteinen. Die industrielle Gewinnung dieser Proteinfracht liefert jedoch lediglich ein minderwertiges, denaturiertes Produkt. Mit Hilfe der Membranadsorber-Technologie lassen sich aus Kartoffelfruchtwasser unter milden Reaktionsbedingungen native bioaktive Proteinfraktionen gewinnen. Geeignete Trennbedingungen wurden im Labormaßstab entwickelt und in den Technikumsmaßstab {\"u}bertragen. An Anionenaustauscher-Membranadsorbern mit einer Membranfl{\"a}che von 10 000 cm2 wurde eine Patatinhaltige Fraktion (44 kDa) mit Bindungskapazit{\"a}ten von 0,37 mg/cm2 isoliert. Eine niedermolekulare Proteinfraktion mit Protease-Inhibitoren konnte durch Kationenaustauscher-Membranadsorber mit Bindungskapazit{\"a}ten von 1,00 mg/cm2 gewonnen werden. Sie ist f{\"u}r verschiedenste Applikationen in der pharmazeutischen, kosmetischen und der Nahrungsmittelindustrie interessant z. B. f{\"u}r Appetitz{\"u}gler oder muskelaufbauende Proteinpr{\"a}parate. Der Aufreinigung der nativen Proteinfraktionen durch Ultra-/Diafiltration schließt sich die Konfektionierung durch Spr{\"u}htrocknung an. Die bioanalytische Charakterisierung der Produkte belegt die Reinheit und die enzymatische Aktivit{\"a}t sowie die Abreicherung von St{\"o}rkomponenten wie Glykoalkaloide und Polyphenoloxidasen.},
  language  = {de}
}
@article{UlberPothMonzonetal.2010,
  author    = {Ulber, Roland and Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils},
  title     = {Prozessintegration von Hydrolyse und Fermentation von Cellulose- Faserstoff},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  issn      = {1522-2640},
  doi       = {10.1002/cite.200900103},
  pages     = {135 -- 139},
  year      = {2010},
  abstract  = {Ein viel versprechender erneuerbarer Rohstoff f{\"u}r die Produktion von Chemikalien und Treibstoffen ist Lignocellulose aus pflanzlicher Biomasse. Die darin enthaltenen Zucker k{\"o}nnen mittels enzymatischer Hydrolyse freigesetzt und fermentativ zu Ethanol umgesetzt werden. Ein interessanter Ansatz ist dabei die simultane Verzuckerung und Fermentation. Hefen und Enzyme haben mit 30 °C bzw. 50 °C zwar unterschiedliche Temperaturoptima, es konnte aber gezeigt werden, dass auch bei den niedrigeren Temperaturen eine Umsetzung der Cellulose zu Glucose erfolgt, wenn auch langsamer als bei optimalen Bedingungen. Außerdem konnte in Vorversuchen gezeigt werden, dass Ethanol in den zu erwartenden Konzentrationen keinen Einfluss auf die enzymatische Umsetzung hat.},
  language  = {de}
}
@article{SiekerNeunerDimitrovaetal.2010,
  author    = {Sieker, Tim and Neuner, Andreas and Dimitrova, Darina and Tippk{\"o}tter, Nils and Bart, Hans-J{\"o}rg and Heinzle, Elmar and Ulber, Roland},
  title     = {Grassilage als Rohstoff f{\"u}r die chemische Industrie},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {8, Special Issue: Industrielle Nutzung nachwachsender Rohstoffe},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1522-2640},
  doi       = {10.1002/cite.201000088},
  pages     = {1153 -- 1159},
  year      = {2010},
  abstract  = {Grassilage stellt einen nachwachsenden Rohstoff mit großem Potenzial dar. Neben Cellulose und Hemicellulose enth{\"a}lt sie auch organische S{\"a}uren, insbesondere Milchs{\"a}ure. In einem Bioraffinerie-Projekt wird die Milchs{\"a}ure aus der Silage isoliert und mit gentechnisch optimierten St{\"a}mmen zu L-Lysin weiterverarbeitet. Die Lignocellulose wird hydrolysiert und zu Ethanol fermentiert. Ein besonderes Augenmerk liegt auf der Integration der unterschiedlichen Prozesse sowie der einzelnen Prozessschritte zu einem Gesamtprozess, der s{\"a}mtliche Inhaltsstoffe der Silage verwertet.},
  language  = {de}
}
@article{TippkoetterRoikaewUlberetal.2010,
  author    = {Tippk{\"o}tter, Nils and Roikaew, Wipa and Ulber, Roland and Hoffmann, Alexander and Denzler, Hans-J{\"o}rg and Buchholz, Heinrich},
  title     = {Paracoccus denitrificans for the effluent recycling during continuous denitrification of liquid food},
  series = {Biotechnology Progress},
  volume    = {26},
  journal   = {Biotechnology Progress},
  number    = {3},
  publisher = {Wiley},
  address   = {Hoboken, NJ},
  issn      = {8756-7938},
  doi       = {10.1002/btpr.384},
  pages     = {756 -- 762},
  year      = {2010},
  abstract  = {Nitrate is an undesirable component of several foods. A typical case of contamination with high nitrate contents is whey concentrate, containing nitrate in concentrations up to 25 l. The microbiological removal of nitrate by Paracoccus denitrificans under formation of harmless nitrogen in combination with a cell retention reactor is described here. Focus lies on the resource-conserving design of a microbal denitrification process. Two methods are compared. The application of polyvinyl alcohol-immobilized cells, which can be applied several times in whey feed, is compared with the implementation of a two step denitrification system. First, the whey concentrate's nitrate is removed by ion exchange and subsequently the eluent regenerated by microorganisms under their retention by crossflow filtration. Nitrite and nitrate concentrations were determined by reflectometric color measurement with a commercially available Reflectoquant® device. Correction factors for these media had to be determined. During the pilot development, bioreactors from 4 to 250 mg·L-1 and crossflow units with membrane areas from 0.02 to 0.80 m2 were examined. Based on the results of the pilot plants, a scaling for the exemplary process of denitrifying 1,000 tons per day is discussed.},
  language  = {en}
}
@article{PothMonzonTippkoetteretal.2011,
  author    = {Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Lignocellulosic biorefinery: Process integration of hydrolysis and fermentation (SSF process)},
  series = {Holzforschung},
  volume    = {65},
  journal   = {Holzforschung},
  number    = {5},
  publisher = {De Gruyter},
  address   = {Berlin},
  pages     = {633 -- 637},
  year      = {2011},
  abstract  = {The aim of the present work is the process integration and the optimization of the enzymatic hydrolysis of wood and the following fermentation of the products to ethanol. The substrate is a fiber fraction obtained by organosolv pre-treatment of beech wood. For the ethanol production, a co-fermentation by two different yeasts (Saccharomyces cerevisiae and Pachysolen tannophilus) was carried out to convert glucose as well as xylose. Two approaches has been followed: 1. A two step process, in which the hydrolysis of the fiber fraction and the fermentation to product are separated from each other. 2. A process, in which the hydrolysis and the fermentation are carried out in one single process step as simultaneous saccharification and fermentation (SSF). Following the first approach, a yield of about 0.15 g ethanol per gram substrate can be reached. Based on the SSF, one process step can be saved, and additionally, the gained yield can be raised up to 0.3 g ethanol per gram substrate.},
  language  = {en}
}
@article{SiekerNeunerDimitrovaetal.2011,
  author    = {Sieker, Tim and Neuner, Andreas and Dimitrova, Darina and Tippk{\"o}tter, Nils and Muffler, Kai and Bart, Hans-J{\"o}rg and Heinzle, Elmar and Ulber, Roland},
  title     = {Ethanol production from grass silage by simultaneous pretreatment, saccharification and fermentation: First steps in the process development},
  series = {Engineering in Life Sciences},
  volume    = {11},
  journal   = {Engineering in Life Sciences},
  number    = {4},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/elsc.201000160},
  pages     = {436 -- 442},
  year      = {2011},
  abstract  = {Grass silage provides a great potential as renewable feedstock. Two fractions of the grass silage, a press juice and the fiber fraction, were evaluated for their possible use for bioethanol production. Direct production of ethanol from press juice is not possible due to high concentrations of organic acids. For the fiber fraction, alkaline peroxide or enzymatic pretreatment was used, which removes the phenolic acids in the cell wall. In this study, we demonstrate the possibility to integrate the enzymatic pretreatment with a simultaneous saccharification and fermentation to achieve ethanol production from grass silage in a one-process step. Achieved yields were about 53 g ethanol per kg silage with the alkaline peroxide pretreatment and 91 g/kg with the enzymatic pretreatment at concentrations of 8.5 and 14.6 g/L, respectively. Furthermore, it was shown that additional supplementation of the fermentation medium with vitamins, trace elements and nutrient salts is not necessary when the press juice is directly used in the fermentation step.},
  language  = {en}
}
@article{TippkoetterAlKaidyWollnyetal.2013,
  author    = {Tippk{\"o}tter, Nils and Al-Kaidy, Huschyar and Wollny, Steffen and Ulber, Roland},
  title     = {Functionalized magnetizable particles for downstream processing in single-use systems},
  series = {Chemie Ingenieur Technik},
  volume    = {85},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2: Special Issue: Single-Use Technology},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/cite.201200130},
  pages     = {76 -- 86},
  year      = {2013},
  abstract  = {Biotechnological downstream processing is usually an elaborate procedure, requiring a multitude of unit operations to isolate the target component. Besides the disadvantageous space-time yield, the risks of cross-contaminations and product loss grow fast with the complexity of the isolation procedure. A significant reduction of unit operations can be achieved by application of magnetic particles, especially if these are functionalized with affinity ligands. As magnetic susceptible materials are highly uncommon in biotechnological processes, target binding and selective separation of such particles from fermentation or reactions broths can be done in a single step. Since the magnetizable particles can be produced from iron salts and low priced polymers, a single-use implementation of these systems is highly conceivable. In this article, the principles of magnetizable particles, their synthesis and functionalization are explained. Furthermore, applications in the area of reaction engineering, microfluidics and downstream processing are discussed focusing on established single-use technologies and development potential.},
  language  = {en}
}
@article{ThielTippkoetterSucketal.2013,
  author    = {Thiel, Alexander and Tippk{\"o}tter, Nils and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {New zeolite adsorbents for downstream processing of polyphenols from renewable resources},
  series = {Engineering in Life Sciences},
  volume    = {13},
  journal   = {Engineering in Life Sciences},
  number    = {3},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/elsc.201200188},
  pages     = {239 -- 246},
  year      = {2013},
  abstract  = {Commercial materials with polyvinylpolypyrrolidone and polymeric amberlites (XAD7HP, XAD16) are commonly used for the adsorptive downstream processing of polyphenols from renewable resources. In this study, beta-zeolite-based adsorbent systems were examined, and their properties were compared to organic resins. Batch adsorption experiments were conducted with synthetic solutions of major polyphenols. Adsorption isotherms and desorption characteristics of individual adsorbent were determined based on these results. Maximum adsorption capacities were calculated using the Langmuir model. For example, the zeolites had capacities up to 203.2 mg/g for ferulic acid. To extend these results to a complex system, additional experiments were performed on rapeseed meal and wheat seed extracts as representative renewable resources. HPLC analysis showed that with 7.5\% w/v, which is regarded as the optimum amount of zeolites, zeolites A and B could bind 100\% of the major polyphenols as well as release polyphenols at high yields. Additionally, regeneration experiments were performed with isopropyl alcohol at 99°C to evaluate how zeolites regenerate under mild conditions. The results showed only a negligible loss of adsorption capacity and no loss of desorption capacity. In summary, it was concluded that beta-zeolites were promising adsorbents for developing new processes to isolate polyphenols from renewable resources.},
  language  = {en}
}
@article{AlKaidyDuweHusteretal.2014,
  author    = {Al-Kaidy, Huschyar and Duwe, Anna and Huster, Manuel and Muffler, Kai and Schlegel, Christin and Sieker, Tim and Stadtm{\"u}ller, Ralf and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Biotechnologie und Bioverfahrenstechnik - Vom ersten Ullmanns Artikel bis hin zu aktuellen Forschungsthemen},
  series = {Chemie Ingenieur Technik},
  volume    = {86},
  journal   = {Chemie Ingenieur Technik},
  number    = {12},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201400083},
  pages     = {2215 -- 2225},
  year      = {2014},
  abstract  = {Biotechnologie und die mit ihr verbundenen technischen Prozesse pr{\"a}gen seit Jahrtausenden die Entwicklung der Menschheit. Ausgehend von empirischen Verfahren, insbesondere zur Herstellung von Lebensmitteln und t{\"a}glichen Gebrauchsg{\"u}tern, haben sich diese Disziplinen zu einem der innovativsten Zukunftsfelder entwickelt. Durch das immer detailliertere Verst{\"a}ndnis zellul{\"a}rer Vorg{\"a}nge k{\"o}nnen mittlerweile Produktionsst{\"a}mme gezielt optimiert werden. Im Zusammenspiel mit moderner Prozesstechnik k{\"o}nnen so eine Vielzahl von Bulk- und Feinchemikalien sowie Pharmazeutika effizient hergestellt werden. In diesem Artikel werden exemplarisch einige der aktuellen Trends vorgestellt.},
  language  = {de}
}
@article{WiesenTippkoetterMuffleretal.2014,
  author    = {Wiesen, Sebastian and Tippk{\"o}tter, Nils and Muffler, Kai and Suck, Kirstin and Sohling, Ulrich and Ruf, Nils and Ulber, Roland},
  title     = {Adsorptive Vorbehandlung von Rohglycerin f{\"u}r die 1,3-Propandiol Fermentation mit Clostridium diolis},
  series = {Chemie Ingenieur Technik},
  volume    = {86},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  doi       = {10.1002/cite.201300080},
  pages     = {129 -- 135},
  year      = {2014},
  abstract  = {Bei der Gewinnung von Fetts{\"a}uren aus Pflanzen{\"o}len, z. B. zur Herstellung von Biopolymeren, oder bei der Biodiesel- und Seifenproduktion, f{\"a}llt Glycerin als Nebenprodukt an. Bei der Biokonversion dieses Rohstoffes zu 1,3-Propandiol wird der Produktionsorganismus Clostridium diolis durch Verunreinigungen im Rohglycerin gehemmt. Als inhibierende Substanzen konnten freie Fetts{\"a}uren identifiziert werden. Mithilfe eines adsorptiven Aufarbeitungsverfahrens ist es gelungen, die Fetts{\"a}uren zu entfernen und die Konversionseffizienz zu 1,3-Propandiol zu erh{\"o}hen.},
  language  = {de}
}
@article{TippkoetterWollnySucketal.2014,
  author    = {Tippk{\"o}tter, Nils and Wollny, Steffen and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {Recycling of spent oil bleaching earth as source of glycerol for the anaerobic production of acetone, butanol, and ethanol with Clostridium diolis and lipolytic Clostridium lundense},
  series = {Engineering in Life Sciences},
  volume    = {14},
  journal   = {Engineering in Life Sciences},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1618-2863},
  doi       = {10.1002/elsc.201300113},
  pages     = {425 -- 432},
  year      = {2014},
  abstract  = {A major part of edible oil is subjected to bleaching procedures, primarily with minerals applied as adsorbers. Their recycling is currently done either by regaining the oil via organic solvent extraction or by using the spent bleaching earth (SBE) as additive for animal feed, etc. As a new method, the reutilization of the by-product SBE for the microbiologic formation of acetone, butanol, and ethanol (ABE) is presented as proof-of-concept. The SBE was taken from a palm oil cleaning process. The recycling concept is based on the application of lipolytic clostridia strains. Due to considerably long fermentation times, co-fermentation with Candida rugosa and enzymatic hydrolyses of the bound oil with a subsequent clostridia fermentation are shown as alternative routes. Anaerobic fermentations under comparison of different clostridia strains were performed with glycerol media, enzymatically hydrolyzed palm oil and SBE. Solutes, side product compositions and productivities were quantified via HPLC. A successful production of ABE solutes from SBE has been done with a yield of 0.15 g butanol per gram of bound glycerol. Thus, the biotechnological recycling of the waste stream is possible in principle. Inhibition of the substrate suspension has been observed. A chromatographic ion-exchange of substrates increased the biomass concentration.},
  language  = {en}
}
@article{PasteurTippkoetterKampeisetal.2014,
  author    = {Pasteur, Aline and Tippk{\"o}tter, Nils and Kampeis, Percy and Ulber, Roland},
  title     = {Optimization of high gradient magnetic separation filter units for the purification of fermentation products},
  series = {IEEE TRANSACTIONS ON MAGNETICS},
  volume    = {50},
  journal   = {IEEE TRANSACTIONS ON MAGNETICS},
  number    = {10},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {0018-9464},
  doi       = {10.1109/TMAG.2014.2325535},
  pages     = {Artikel 5000607},
  year      = {2014},
  abstract  = {High gradient magnetic separation (HGMS) has been established since the early 1970s. A more recent application of these systems is the use in bioprocesses. To integrate the HGMS in a fermentation process, it is necessary to optimize the separation matrix with regard to the magnetic separation characteristics and permeability of the non-magnetizable components of the fermentation broth. As part of the work presented here, a combined fluidic and magnetic force finite element model simulation was created using the software COMSOL Multiphysics and compared with separation experiments. Finally, as optimal lattice orientation of the separation matrix, a transversal rhombohedral arrangement was defined. The high suitability of the new filter matrix has been verified by separation experiments.},
  language  = {en}
}
@article{ThielMufflerTippkoetteretal.2015,
  author    = {Thiel, Alexander and Muffler, Kai and Tippk{\"o}tter, Nils and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {Aufarbeitung von Polyphenolen aus Weizen mittels Zeolithen am Beispiel der Ferulas{\"a}ure},
  series = {Chemie IngenieurTechnik},
  volume    = {87},
  journal   = {Chemie IngenieurTechnik},
  number    = {1-2},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/cite.201400031},
  pages     = {128 -- 136},
  year      = {2015},
  abstract  = {Aufarbeitung von Polyphenolen aus Weizenmittels Zeolithen am Beispiel der Ferulasa¨ ureAlexander Thiel1, Kai Muffler1, Nils Tippko¨ tter1, Kirstin Suck2, Ulrich Sohling2, Friedrich Ruf3und Roland Ulber1,*DOI: 10.1002/cite.201400031Bei der Ferulasa¨ure handelt es sich um einen Wertstoff, der aus Weizen gewonnen und in der Lebensmittel- und Pharma-industrie eingesetzt werden kann. Der Einsatz von Weizen als nachwachsende Rohstoffquelle ist allerdings nur dann wirt-schaftlich durchfu¨hrbar, wenn eine Prozessintegration in die bestehenden industriellen Verfahren gewa¨hrleistet oder einedirekte Konkurrenz zur Mehl- und Sta¨rkeindustrie vermieden werden kann. In diesem Artikel wird ein Verfahren aufge-zeigt, welches hohe Ausbeuten ermo¨glicht und eine Konkurrenz zu bestehenden Verwertungspfaden vermeidet.},
  language  = {de}
}
@article{SchumannRoginSchneideretal.2015,
  author    = {Schumann, Christiane and Rogin, Sabine and Schneider, Horst and Tippk{\"o}tter, Nils and Oster, J{\"u}rgen and Kampeis, Percy},
  title     = {Simultane Atline-Quantifizierung von Magnetpartikeln und Mikroorganismen bei einer HGMS-Filtration},
  series = {Chemie Ingenieur Technik},
  volume    = {87},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  doi       = {10.1002/cite.201300158},
  pages     = {137 -- 149},
  year      = {2015},
  abstract  = {Es wird eine neue Atline-Messmethode vorgestellt, mit der w{\"a}hrend einer Hochgradienten-Magnetseparation (HGMS)-Filtration eine simultane Quantifizierung von Magnetpartikeln und Mikroorganismen im Filtrat vorgenommen werden kann. Dabei gelingt die Quantifizierung signifikant besser als mit bisher verwendeten Messmethoden. Mit dieser Methode ist es m{\"o}glich, die Trennleistung einer HGMS-Filtration zu bestimmen und einen Filterdurchbruch durch Konzentrationsanstiege im Bereich einiger µg L-1 von Magnetpartikeln im Filtrat fr{\"u}hzeitig zu detektieren, ohne dass nennenswerte Partikelmengen verloren gehen.},
  language  = {de}
}
@article{ThielMufflerTippkoetteretal.2015,
  author    = {Thiel, Alexander and Muffler, Kai and Tippk{\"o}tter, Nils and Suck, Kirstin and Sohling, Ulrich and Hruschka, Steffen M. and Ulber, Roland},
  title     = {A novel integrated downstream processing approach to recover sinapic acid, phytic acid and proteins from rapeseed meal},
  series = {Journal of Chemical Technology and Biotechnology},
  volume    = {90},
  journal   = {Journal of Chemical Technology and Biotechnology},
  number    = {11},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/jctb.4664},
  pages     = {1999 -- 2006},
  year      = {2015},
  abstract  = {BACKGROUND Currently, several techniques exist for the downstream processing of protein, phytic acid and sinapic acid from rapeseed and rapeseed meal, but no technique has been developed to separate all of the components in one process. In this work, two new downstream processing strategies focusing on recovering sinapic acid, phytic acid and protein from rapeseed meal were established. RESULTS The sinapic acid content was enhanced by a factor of 4.5 with one method and 5.1 with the other. The isolation of sinapic acid was accomplished using a zeolite-based adsorbent with high adsorptive and optimal desorption characteristics. Phytic acid was isolated using the anion-exchange resin Purolite A200®. In addition, the processes resulted in two separated protein fractions. The ratios of globulin and albumin ratio to the total protein were 59.2\% and 40.1\%, respectively. The steps were then combined in two different ways: (a) a 'sequential process' using the zeolite and A200 in batch processes; and (b) a 'parallel process' using only A200 in a chromatographic system to separate all of the compounds. CONCLUSIONS It can be concluded that isolation of all three components was possible in both processes. These could enhance the added value of current processes using rapeseed meal as a protein source. © 2015 Society of Chemical Industry},
  language  = {en}
}
@article{AlKaidyDuweHusteretal.2015,
  author    = {Al-Kaidy, Huschyar and Duwe, Anna and Huster, Manuel and Muffler, Kai and Schlegel, Christin and Tim, Sieker and Stadtm{\"u}ller, Ralf and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Biotechnology and bioprocess engineering - from the first ullmann's article to recent trends},
  series = {ChemBioEng Reviews},
  volume    = {2},
  journal   = {ChemBioEng Reviews},
  number    = {3},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/cben.201500008},
  pages     = {175 -- 184},
  year      = {2015},
  abstract  = {For several thousand years, biotechnology and its associated technical processes have had a great impact on the development of mankind. Based on empirical methods, in particular for the production of foodstuffs and daily commodities, these disciplines have become one of the most innovative future issues. Due to the increasing detailed understanding of cellular processes, production strains can now be optimized. In combination with modern bioprocesses, a variety of bulk and fine chemicals as well as pharmaceuticals can be produced efficiently. In this article, some of the current trends in biotechnology are discussed.},
  language  = {en}
}
@article{AlKaidyTippkoetter2016,
  author    = {Al-Kaidy, Huschyar and Tippk{\"o}tter, Nils},
  title     = {Superparamagnetic hydrophobic particles as shell material for digital microfluidic droplets and proof-of-principle reaction assessments with immobilized laccase},
  series = {Engineering in Life Sciences},
  volume    = {16},
  journal   = {Engineering in Life Sciences},
  number    = {3},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  doi       = {10.1002/elsc.201400124},
  pages     = {222 -- 230},
  year      = {2016},
  abstract  = {In the field of biotechnology and molecular biology, the use of small liquid volumes has significant advantages. In particular, screening and optimization runs with acceptable amounts of expensive and hardly available catalysts, reagents, or biomolecules are feasible with microfluidic technologies. The presented new microfluidic system is based on the inclusion of small liquid volumes by a protective shell of magnetizable microparticles. Hereby, discrete aqueous microreactor drops with volumes of 1-30 μL can be formed on a simple planar surface. A digital movement and manipulation of the microreactor is performed by overlapping magnetic forces. The magnetic forces are generated by an electrical coil matrix positioned below a glass plate. With the new platform technology, several discrete reaction compartments can be moved simultaneously on one surface. Due to the magnetic fields, the reactors can even be merged to initiate reactions by mixing or positioned above surface-immobilized catalysts and then opened by magnetic force. Comparative synthesis routes of the magnetizable shell particles and superhydrophobic glass slides including their performance and stability with the reaction platform are described. The influence of diffusive mass transport during the catalyzed reaction is discussed by evaluation finite element model of the microreactor. Furthermore, a first model dye reaction of the enzyme laccase has been established.},
  language  = {en}
}
@article{RothTippkoetter2016,
  author    = {Roth, Jasmine and Tippk{\"o}tter, Nils},
  title     = {Evaluation of lignocellulosic material for butanol production using enzymatic hydrolysate medium},
  series = {Cellulose Chemistry and Technology},
  volume    = {50},
  journal   = {Cellulose Chemistry and Technology},
  number    = {3-4},
  publisher = {Editura Academiei Romane},
  address   = {Bukarest},
  pages     = {405 -- 410},
  year      = {2016},
  abstract  = {Butanol is a promising gasoline additive and platform chemical that can be readily produced via acetone-butanolethanol (ABE) fermentation from pretreated lignocellulosic materials. This article examines lignocellulosic material from beech wood for ABE fermentation, using Clostridium acetobutylicum. First, the utilization of both C₅₋ (xylose) and C₆₋ (glucose) sugars as sole carbon source was investigated in static cultivation, using serum bottles and synthetic medium. The utilization of pentose sugar resulted in a solvent yield of 0.231 g·g_sugar⁻¹, compared to 0.262 g·g_sugar⁻¹ using hexose. Then, the Organosolv pretreated crude cellulose fibers (CF) were enzymatically decomposed, and the resulting hydrolysate medium was analyzed for inhibiting compounds (furans, organic acids, phenolics) and treated with ionexchangers for detoxification. Batch fermentation in a bioreactor using CF hydrolysate medium resulted in a total solvent yield of 0.20 gABE·g_sugar⁻¹.},
  language  = {en}
}
@article{RoeschKratzHeringetal.2016,
  author    = {R{\"o}sch, C. and Kratz, F. and Hering, T. and Trautmann, S. and Umanskaya, N. and Tippk{\"o}tter, Nils and M{\"u}ller-Renno, C.M. and Ulber, R. and Hannig, M. and Ziegler, C.},
  title     = {Albumin-lysozyme interactions: cooperative adsorption on titanium and enzymatic activity},
  series = {Colloids and Surfaces B: Biointerfaces},
  volume    = {149},
  journal   = {Colloids and Surfaces B: Biointerfaces},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.colsurfb.2016.09.048},
  pages     = {115 -- 121},
  year      = {2016},
  abstract  = {The interplay of albumin (BSA) and lysozyme (LYZ) adsorbed simultaneously on titanium was analyzed by gel electrophoresis and BCA assay. It was found that BSA and lysozyme adsorb cooperatively. Additionally, the isoelectric point of the respective protein influences the adsorption. Also, the enzymatic activity of lysozyme and amylase (AMY) in mixtures with BSA was considered with respect to a possible influence of protein-protein interaction on enzyme activity. Indeed, an increase of lysozyme activity in the presence of BSA could be observed. In contrast, BSA does not influence the activity of amylase.},
  language  = {en}
}
@article{HorbachDuongStaat2017,
  author    = {Horbach, Andreas and Duong, Minh Tuan and Staat, Manfred},
  title     = {Modelling of compressible and orthotropic surgical mesh implants based on optical deformation measurement},
  series = {Journal of the mechanical behavior of biomedical materials},
  volume    = {74},
  journal   = {Journal of the mechanical behavior of biomedical materials},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1751-6161},
  doi       = {10.1016/j.jmbbm.2017.06.012},
  pages     = {400 -- 410},
  year      = {2017},
  language  = {en}
}
@article{MichaelMayerWeberetal.2017,
  author    = {Michael, Hackl and Mayer, Katharina and Weber, Mareike and Staat, Manfred and van Riet, Roger and Burkhart, Klau Josef and M{\"u}ller, Lars Peter and Wegmann, Kilian},
  title     = {Plate osteosynthesis of proximal ulna fractures : a biomechanical micromotion analysis},
  series = {The journal of hand surgery},
  volume    = {42},
  journal   = {The journal of hand surgery},
  number    = {10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0363-5023},
  doi       = {10.1016/j.jhsa.2017.05.014},
  pages     = {834.e1 -- 834.e7},
  year      = {2017},
  language  = {en}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge. Teil 2: Ausgew{\"a}hlte technische Aspekte und Prozesse},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {66},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {74 -- 77},
  year      = {2017},
  language  = {de}
}
@article{PfaffSchmidt2016,
  author    = {Pfaff, Raphael and Schmidt, Bernd},
  title     = {Daten in der Cloud - und dann?},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {6},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {50 -- 55},
  year      = {2016},
  abstract  = {Schienenverkehrssysteme stehen in zunehmendem Wettbewerb, sowohl untereinander als auch mit anderen Verkehrstr{\"a}gern. Als wichtiger Aspekt zur Steigerung der Kosteneffizienz wird die Digitalisierung des Betriebs und der Fahrzeuge betrachtet. {\"U}ber eine Prognose der Ausfallwahrscheinlichkeit bzw. Restlebensdauer von Subsystemen k{\"o}nnen mittels Digitalisierung die Instandhaltungskosten gesenkt werden. Die geringen Fehlerraten im System Bahn machen die Nutzung besonderer Simulationstechniken notwendig. In diesem Beitrag wird gezeigt, wie sich die Subsystemverf{\"u}gbarkeit aus den beobachteten Fehlerraten der Teilfunktionen vorhersagen l{\"a}sst.},
  language  = {de}
}
@article{SchneiderSchneiderKinderetal.2017,
  author    = {Schneider, Wilhelm and Schneider, Bettina and Kinder, Stephanie and Meinhardt, Kerstin},
  title     = {Grundbegriffe der Abgabenordnung},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  volume    = {46},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  number    = {5},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {575 -- 581},
  year      = {2017},
  language  = {de}
}
@article{YoshinobuMiyamotoWerneretal.2017,
  author    = {Yoshinobu, Tatsuo and Miyamoto, Ko-ichiro and Werner, Frederik and Poghossian, Arshak and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Light-addressable potentiometric sensors for quantitative spatial imaging of chemical species},
  series = {Annual Review of Analytical Chemistry},
  volume    = {10},
  journal   = {Annual Review of Analytical Chemistry},
  publisher = {Annual Reviews},
  address   = {Palo Alto, Calif.},
  issn      = {1936-1327},
  doi       = {10.1146/annurev-anchem-061516-045158},
  pages     = {225 -- 246},
  year      = {2017},
  abstract  = {A light-addressable potentiometric sensor (LAPS) is a semiconductor-based chemical sensor, in which a measurement site on the sensing surface is defined by illumination. This light addressability can be applied to visualize the spatial distribution of pH or the concentration of a specific chemical species, with potential applications in the fields of chemistry, materials science, biology, and medicine. In this review, the features of this chemical imaging sensor technology are compared with those of other technologies. Instrumentation, principles of operation, and various measurement modes of chemical imaging sensor systems are described. The review discusses and summarizes state-of-the-art technologies, especially with regard to the spatial resolution and measurement speed; for example, a high spatial resolution in a submicron range and a readout speed in the range of several tens of thousands of pixels per second have been achieved with the LAPS. The possibility of combining this technology with microfluidic devices and other potential future developments are discussed.},
  language  = {en}
}
@article{SousaSiqueiraVerciketal.2017,
  author    = {Sousa, Marcos A. M. and Siqueira, Jose R. Jr. and Vercik, Andres and Sch{\"o}ning, Michael Josef and Oliveira, Osvaldo N. Jr.},
  title     = {Determining the optimized layer-by-layer film architecture with dendrimer/carbon nanotubes for field-effect sensors},
  series = {IEEE Sensors Journal},
  volume    = {17},
  journal   = {IEEE Sensors Journal},
  number    = {6},
  publisher = {IEEE},
  address   = {New York},
  issn      = {1558-1748},
  doi       = {10.1109/JSEN.2017.2653238},
  pages     = {1735 -- 1740},
  year      = {2017},
  abstract  = {The capacitive electrolyte-insulator-semiconductor (EIS) structure is a typical device based on a field-effect sensor platform. With a simple silicon-based structure, EIS have been useful for several sensing applications, especially with incorporation of nanostructured films to modulate the ionic transport and the flat-band potential. In this paper, we report on ion transport and changes in flat-band potential in EIS sensors made with layer-by-layer films containing poly(amidoamine) (PAMAM) dendrimer and single-walled carbon nanotubes (SWNTs) adsorbed on p-Si/SiO 2 /Ta 2 O 5 chips with an Al ohmic contact. The impedance spectra were fitted using an equivalent circuit model, from which we could determine parameters such as the double-layer capacitance. This capacitance decreased with the number of bilayers owing to space charge accumulated at the electrolyte-insulator interface, up to three PAMAM/SWNTs bilayers, after which it stabilized. The charge-transfer resistance was also minimum for three bilayers, thus indicating that this is the ideal architecture for an optimized EIS performance. The understanding of the influence of nanostructures and the fine control of operation parameters pave the way for optimizing the design and performance of new EIS sensors.},
  language  = {en}
}
@article{GamellaZakharchenkoGuzetal.2017,
  author    = {Gamella, Maria and Zakharchenko, Andrey and Guz, Nataliia and Masi, Madeline and Minko, Sergiy and Kolpashchikov, Dmitry M. and Iken, Heiko and Poghossian, Arshak and Sch{\"o}ning, Michael Josef and Katz, Evgeny},
  title     = {DNA computing system activated by electrochemically triggered DNA realease from a polymer-brush-modified electrode array},
  series = {Electroanalysis},
  volume    = {29},
  journal   = {Electroanalysis},
  number    = {2},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4109},
  doi       = {10.1002/elan.201600389},
  pages     = {398 -- 408},
  year      = {2017},
  abstract  = {An array of four independently wired indium tin oxide (ITO) electrodes was used for electrochemically stimulated DNA release and activation of DNA-based Identity, AND and XOR logic gates. Single-stranded DNA molecules were loaded on the mixed poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA)/poly(methacrylic acid) (PMAA) brush covalently attached to the ITO electrodes. The DNA deposition was performed at pH 5.0 when the polymer brush is positively charged due to protonation of tertiary amino groups in PDMAEMA, thus resulting in electrostatic attraction of the negatively charged DNA. By applying electrolysis at -1.0 V(vs. Ag/AgCl reference) electrochemical oxygen reduction resulted in the consumption of hydrogen ions and local pH increase near the electrode surface. The process resulted in recharging the polymer brush to the negative state due to dissociation of carboxylic groups of PMAA, thus repulsing the negatively charged DNA and releasing it from the electrode surface. The DNA release was performed in various combinations from different electrodes in the array assembly. The released DNA operated as input signals for activation of the Boolean logic gates. The developed system represents a step forward in DNA computing, combining for the first time DNA chemical processes with electronic input signals.},
  language  = {en}
}
@article{BronderPoghossianKeusgenetal.2017,
  author    = {Bronder, Thomas and Poghossian, Arshak and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Label-free detection of double-stranded DNA molecules with polyelectrolyte-modified capacitive field-effect sensors},
  series = {tm - Technisches Messen},
  volume    = {84},
  journal   = {tm - Technisches Messen},
  number    = {10},
  publisher = {De Gruyter},
  address   = {Oldenbourg},
  doi       = {10.1515/teme-2017-0015},
  pages     = {628 -- 634},
  year      = {2017},
  abstract  = {In this study, polyelectrolyte-modified field-effect-based electrolyte-insulator-semiconductor (EIS) devices have been used for the label-free electrical detection of double-stranded deoxyribonucleic acid (dsDNA)molecules. The sensor-chip functionalization with a positively charged polyelectrolyte layer provides the possibility of direct adsorptive binding of negatively charged target DNA oligonucleotides onto theSiO2-chip surface.EIS sensors can be utilized as a tool to detect surface-charge changes; the electrostatic adsorption of oligonucleotides onto the polyelectrolyte layer leads to a measureable surface-potential change. Signals of 39mV have been recorded after the incubation with the oligonucleotide solution. Besides the electrochemical experiments, the successful adsorption of dsDNA onto the polyelectrolyte layer has been verified via fluorescence microscopy. The presented results demonstrate that the signal recording of EISchips, which are modified with a polyelectrolyte layer, canbe used as a favorable approach for a fast, cheap and simple detection method for dsDNA.},
  language  = {en}
}
@article{ArreolaOberlaenderMaetzkowetal.2017,
  author    = {Arreola, Julio and Oberl{\"a}nder, Jan and M{\"a}tzkow, M. and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Surface functionalization for spore-based biosensors with organosilanes},
  series = {Electrochimica Acta},
  volume    = {241},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-4686},
  doi       = {10.1016/j.electacta.2017.04.157},
  pages     = {237 -- 243},
  year      = {2017},
  abstract  = {In the present work, surface functionalization of different sensor materials was studied. Organosilanes are well known to serve as coupling agent for biomolecules or cells on inorganic materials. 3-aminopropyltriethoxysilane (APTES) was used to attach microbiological spores time to an interdigitated sensor surface. The functionality and physical properties of APTES were studied on isolated sensor materials, namely silicon dioxide (SiO2) and platinum (Pt) as well as the combined material on sensor level. A predominant immobilization of spores could be demonstrated on SiO2 surfaces. Additionally, the impedance signal of APTES-functionalized biosensor chips has been investigated.},
  language  = {en}
}
@article{BalzerStreit2017,
  author    = {Balzer, Hermann and Streit, Daniel},
  title     = {Das Translationsrisiko multinationaler Konzerne in Deutschland: Eine explorative Analyse von Verst{\"a}ndnis, Bedeutung und Management-Praxis mit Hilfe der Critical Incident Technique},
  series = {Schmalenbachs Zeitschrift f{\"u}r betriebswirtschaftliche Forschung},
  journal   = {Schmalenbachs Zeitschrift f{\"u}r betriebswirtschaftliche Forschung},
  number    = {Online first},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2366-6153},
  doi       = {10.1007/s41471-017-0029-x},
  pages     = {1 -- 40},
  year      = {2017},
  language  = {de}
}
@article{HansenBitzStreckert1999,
  author    = {Hansen, Volkert W. and Bitz, Andreas and Streckert, Joachim R.},
  title     = {RF Exposure of Biological Systems in Radial Waveguides},
  series = {IEEE Transactions on Electromagnetic Compatibility},
  volume    = {41},
  journal   = {IEEE Transactions on Electromagnetic Compatibility},
  number    = {4},
  issn      = {1558-187X},
  doi       = {10.1109/15.809852},
  pages     = {487 -- 493},
  year      = {1999},
  language  = {en}
}
@article{SommerStreckertBitzetal.2004,
  author    = {Sommer, Angela M. and Streckert, Joachim and Bitz, Andreas and Hansen, Volkert W. and Lerchl, Alexander},
  title     = {No effects of GSM-modulated 900 MHz electromagnetic fields on survival rate and spontaneous development of lymphoma in female AKR/J mice},
  series = {BMC Cancer},
  volume    = {77},
  journal   = {BMC Cancer},
  number    = {4},
  doi       = {10.1186/1471-2407-4-77},
  year      = {2004},
  language  = {en}
}
@article{NdoumbeMbonjoMbonjoStreckertBitzetal.2004,
  author    = {Ndoumb{\`e} Mbonjo Mbonjo, H. and Streckert, J. and Bitz, Andreas and Hansen, V. and Glasmachers, A. and Gencol, S. and Rozic, D.},
  title     = {Generic UMTS test signal for RF bioelectromagnetic studies},
  series = {Bioelectromagnetics},
  volume    = {25},
  journal   = {Bioelectromagnetics},
  number    = {6},
  issn      = {1521-186X},
  doi       = {10.1002/bem.20007},
  pages     = {415 -- 425},
  year      = {2004},
  language  = {en}
}
@article{WissenBogdanskiScheeretal.2005,
  author    = {Wissen, M. and Bogdanski, N. and Scheer, H.-C. and Bitz, Andreas and Ahrens, G. and Gruetzner, G.},
  title     = {Implication of the light polarisation for UV curing of pre-patterned resists},
  series = {Microelectronic Engineering},
  volume    = {78-79},
  journal   = {Microelectronic Engineering},
  issn      = {0167-9317},
  doi       = {10.1016/j.mee.2004.12.099},
  pages     = {659 -- 664},
  year      = {2005},
  language  = {en}
}
@article{FrankeStreckertBitzetal.2005,
  author    = {Franke, Helmut and Streckert, Joachim and Bitz, Andreas and Goeke, Johannes and Hansen, Volkert and Ringelstein, E. Bernd and Nattk{\"a}mper, Heiner and Galle, Hans-Joachim and St{\"o}gbauer, Florian},
  title     = {Effects of Universal Mobile Telecommunications System (UMTS) electromagnetic fields on the blood-brain barrier in vitro},
  series = {Radiation Research},
  volume    = {164},
  journal   = {Radiation Research},
  number    = {3},
  issn      = {1938-5404},
  doi       = {10.1667/RR3424.1},
  pages     = {258 -- 269},
  year      = {2005},
  language  = {en}
}
@article{SukhotinaStreckertBitzetal.2006,
  author    = {Sukhotina, Irina and Streckert, Joachim R. and Bitz, Andreas and Hansen, Volkert W. and Lerchl, Alexander},
  title     = {1800 MHz electromagnetic field effects on melatonin release from isolated pineal glands},
  series = {Journal of Pineal Research},
  volume    = {40},
  journal   = {Journal of Pineal Research},
  number    = {1},
  issn      = {1600-079X},
  doi       = {10.1111/j.1600-079X.2005.00284.x},
  pages     = {86 -- 91},
  year      = {2006},
  language  = {en}
}
@article{SommerBitzStreckertetal.2007,
  author    = {Sommer, Angela M. and Bitz, Andreas and Streckert, Joachim and Hansen, Volkert W. and Lerchl, Alexander},
  title     = {Lymphoma development in mice chronically exposed to UMTS-modulated radiofrequency electromagnetic fields},
  series = {Radiation Research},
  volume    = {168},
  journal   = {Radiation Research},
  number    = {1},
  issn      = {1938-5404},
  doi       = {10.1667/RR0857.1},
  pages     = {72 -- 80},
  year      = {2007},
  language  = {en}
}
@article{ReinhardtBitzElOuardietal.2007,
  author    = {Reinhardt, T. and Bitz, Andreas and El Ouardi, A. and Streckert, J. and Sommer, A. and Lerchl, A. and Hansen, V.},
  title     = {Exposure set-ups for in vivo experiments using radial waveguides},
  series = {Radiation Protection Dosimetry},
  volume    = {124},
  journal   = {Radiation Protection Dosimetry},
  number    = {1},
  issn      = {1742-3406},
  doi       = {10.1093/rpd/ncm370},
  pages     = {21 -- 26},
  year      = {2007},
  language  = {en}
}
@article{LerchlKruegerNiehausetal.2008,
  author    = {Lerchl, Alexander and Kr{\"u}ger, Heike and Niehaus, Michael and Streckert, Joachim R. and Bitz, Andreas and Hansen, Volkert},
  title     = {Effects of mobile phone electromagnetic fields at nonthermal SAR values on melatonin and body weight of Djungarian hamsters (Phodopus sungorus)},
  series = {Journal of Pineal Research},
  volume    = {44},
  journal   = {Journal of Pineal Research},
  number    = {3},
  issn      = {1600-079X},
  doi       = {10.1111/j.1600-079X.2007.00522.x},
  pages     = {267 -- 272},
  year      = {2008},
  language  = {en}
}
@article{KlompBitzHeerschapetal.2009,
  author    = {Klomp, D. W. J. and Bitz, Andreas and Heerschap, A. and Scheenen, T. W. J.},
  title     = {Proton spectroscopic imaging of the human prostate at 7 T},
  series = {NMR in Biomedicine},
  volume    = {22},
  journal   = {NMR in Biomedicine},
  number    = {5},
  issn      = {1099-1492},
  doi       = {10.1002/nbm.1360},
  pages     = {495 -- 501},
  year      = {2009},
  language  = {en}
}
@article{SchlamannYoonMaderwaldetal.2009,
  author    = {Schlamann, M. and Yoon, M.-S. and Maderwald, S. and Pietrzyk, T. and Bitz, Andreas and Gerwig, M. and Forsting, M. and Ladd, S. C. and Ladd, M. E. and Kastrup, O.},
  title     = {Auswirkungen der Magnetresonanztomografie auf die Elektrophysiologie des motorischen Kortex: eine Studie mit transkranieller Magnetstimulation},
  series = {R{\"o}Fo - Fortschritte auf dem Giebiet der R{\"o}ntgenstrahlen und der bildgebenden Verfahren},
  volume    = {181},
  journal   = {R{\"o}Fo - Fortschritte auf dem Giebiet der R{\"o}ntgenstrahlen und der bildgebenden Verfahren},
  number    = {3},
  publisher = {Thieme},
  address   = {Stuttgart},
  issn      = {1438-9029},
  doi       = {10.1055/s-0028-1109038},
  pages     = {215 -- 219},
  year      = {2009},
  language  = {de}
}
@article{KraffBitzKruszonaetal.2009,
  author    = {Kraff, Oliver and Bitz, Andreas and Kruszona, Stefan and Orzada, Stephan and Schaefer, Lena C. and Theysohn, Jens M. and Maderwald, Stefan and Ladd, Mark E. and Quick, Harald H.},
  title     = {An eight-channel phased array RF coil for spine MR imaging at 7 T},
  series = {Investigative Radiology},
  volume    = {44},
  journal   = {Investigative Radiology},
  number    = {11},
  publisher = {Lippincott Williams \& Wilkins},
  issn      = {1536-0210},
  doi       = {10.1097/RLI.0b013e3181b24ab7},
  pages     = {734 -- 740},
  year      = {2009},
  language  = {en}
}
@article{SchlamannYoonMaderwaldetal.2010,
  author    = {Schlamann, Marc and Yoon, Min-Suk and Maderwald, Stefan and Pietrzyk, Thomas and Bitz, Andreas and Gerwig, Marcus and Forsting, Michael and Ladd, Susanne C. and Ladd, Mark E. and Kastrup, Oliver},
  title     = {Short term effects of magnetic resonance imaging on excitability of the motor cortex at 1.5T and 7T},
  series = {Academic Radiology},
  volume    = {17},
  journal   = {Academic Radiology},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1076-6332},
  doi       = {10.1016/j.acra.2009.10.004},
  pages     = {277 -- 281},
  year      = {2010},
  abstract  = {Rationale and Objectives The increasing spread of high-field and ultra-high-field magnetic resonance imaging (MRI) scanners has encouraged new discussion of the safety aspects of MRI. Few studies have been published on possible cognitive effects of MRI examinations. The aim of this study was to examine whether changes are measurable after MRI examinations at 1.5 and 7 T by means of transcranial magnetic stimulation (TMS). Materials and Methods TMS was performed in 12 healthy, right-handed male volunteers. First the individual motor threshold was specified, and then the cortical silent period (SP) was measured. Subsequently, the volunteers were exposed to the 1.5-T MRI scanner for 63 minutes using standard sequences. The MRI examination was immediately followed by another TMS session. Fifteen minutes later, TMS was repeated. Four weeks later, the complete setting was repeated using a 7-T scanner. Control conditions included lying in the 1.5-T scanner for 63 minutes without scanning and lying in a separate room for 63 minutes. TMS was performed in the same way in each case. For statistical analysis, Wilcoxon's rank test was performed. Results Immediately after MRI exposure, the SP was highly significantly prolonged in all 12 subjects at 1.5 and 7 T. The motor threshold was significantly increased. Fifteen minutes after the examination, the measured value tended toward normal again. Control conditions revealed no significant differences. Conclusion MRI examinations lead to a transient and highly significant alteration in cortical excitability. This effect does not seem to depend on the strength of the static magnetic field.},
  language  = {en}
}
@article{BitzZhouElQuardietal.2009,
  author    = {Bitz, Andreas and Zhou, Yi and El Quardi, Abdessamad and Streckert, Joachim},
  title     = {Occupational Exposure at Mobile Communication Base Station Antenna Sites},
  series = {Frequenz},
  volume    = {63},
  journal   = {Frequenz},
  number    = {7-8},
  issn      = {2191-6349},
  doi       = {10.1515/FREQ.2009.63.7-8.123},
  pages     = {123 -- 128},
  year      = {2009},
  language  = {en}
}
@article{SchlamannVoigtMaderwaldetal.2010,
  author    = {Schlamann, Marc and Voigt, Melanie A. and Maderwald, Stefan and Bitz, Andreas and Kraff, Oliver and Ladd, Susanne C. and Ladd, Mark E. and Forsting, Michael and Wilhelm, Hans},
  title     = {Exposure to high-field MRI does not affect cognitive function},
  series = {Journal of Magnetic Resonance Imaging},
  volume    = {31},
  journal   = {Journal of Magnetic Resonance Imaging},
  number    = {5},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.22065},
  pages     = {1061 -- 1066},
  year      = {2010},
  abstract  = {Purpose To assess potential cognitive deficits under the influence of static magnetic fields at various field strengths some studies already exist. These studies were not focused on attention as the most vulnerable cognitive function. Additionally, mostly no magnetic resonance imaging (MRI) sequences were performed. Materials and Methods In all, 25 right-handed men were enrolled in this study. All subjects underwent one MRI examination of 63 minutes at 1.5 T and one at 7 T within an interval of 10 to 30 days. The order of the examinations was randomized. Subjects were referred to six standardized neuropsychological tests strictly focused on attention immediately before and after each MRI examination. Differences in neuropsychological variables between the timepoints before and after each MRI examination were assessed and P-values were calculated Results Only six subtests revealed significant differences between pre- and post-MRI. In these tests the subjects achieved better results in post-MRI testing than in pre-MRI testing (P = 0.013-0.032). The other tests revealed no significant results. Conclusion The improvement in post-MRI testing is only explicable as a result of learning effects. MRI examinations, even in ultrahigh-field scanners, do not seem to have any persisting influence on the attention networks of human cognition immediately after exposure.},
  language  = {en}
}
@article{ElQuardiStreckertBitzetal.2011,
  author    = {El Quardi, A. and Streckert, J. and Bitz, Andreas and M{\"u}nkner, S. and Engel, J. and Hansen, V.},
  title     = {New fin-line devices for radiofrequency exposure of small biological samples in vitro allowing whole-cell patch clamp recordings},
  series = {Bioelectromagnetics},
  volume    = {32},
  journal   = {Bioelectromagnetics},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1521-186X},
  doi       = {10.1002/bem.20621},
  pages     = {102 -- 112},
  year      = {2011},
  abstract  = {The development and analysis of three waveguides for the exposure of small biological in vitro samples to mobile communication signals at 900 MHz (GSM, Global System for Mobile Communications), 1.8 GHz (GSM), and 2 GHz (UMTS, Universal Mobile Telecommunications System) is presented. The waveguides were based on a fin-line concept and the chamber containing the samples bathed in extracellular solution was placed onto two fins with a slot in between, where the exposure field concentrates. Measures were taken to allow for patch clamp recordings during radiofrequency (RF) exposure. The necessary power for the achievement of the maximum desired specific absorption rate (SAR) of 20 W/kg (average over the mass of the solution) was approximately Pin = 50 mW, Pin = 19 mW, and Pin = 18 mW for the 900 MHz, 1800 MHz, and 2 GHz devices, respectively. At 20 W/kg, a slight RF-induced temperature elevation in the solution of no more than 0.3 °C was detected, while no thermal offsets due to the electromagnetic exposure could be detected at the lower SAR settings (2, 0.2, and 0.02 W/kg). A deviation of 10\% from the intended solution volume yielded a calculated SAR deviation of 8\% from the desired value. A maximum ±10\% variation in the local SAR could occur when the position of the patch clamp electrode was altered within the area where the cells to be investigated were located.},
  language  = {en}
}