@incollection{BorchertLintzel2012,
  author    = {Borchert, J{\"o}rg and Lintzel, P.},
  title     = {Risiken des Handels},
  series = {Energiehandel in Europa},
  booktitle = {Energiehandel in Europa},
  editor    = {Zenke, Ines},
  edition   = {3. Aufl.},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-9813142-9-8},
  pages     = {303 -- 312},
  year      = {2012},
  language  = {de}
}
@incollection{BorchertMichels2012,
  author    = {Borchert, J{\"o}rg and Michels, A.},
  title     = {Beschaffungsstrategien an der Schnittstelle Energiehandel / Vertrieb},
  series = {Energiehandel in Europa},
  booktitle = {Energiehandel in Europa},
  editor    = {Zenke, ines},
  edition   = {3. Aufl.},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-63237-2},
  pages     = {508 -- 522},
  year      = {2012},
  language  = {de}
}
@incollection{BorggrafeOhndorfDachwaldetal.2012,
  author    = {Borggrafe, Andreas and Ohndorf, Andreas and Dachwald, Bernd and Seboldt, Wolfgang},
  title     = {Analysis of interplanetary solar sail trajectories with attitude dynamics},
  series = {Dynamics and Control of Space Systems 2012},
  booktitle = {Dynamics and Control of Space Systems 2012},
  publisher = {Univelt Inc},
  address   = {San Diego},
  isbn      = {978-0-87703-587-9},
  pages     = {1553 -- 1569},
  year      = {2012},
  abstract  = {We present a new approach to the problem of optimal control of solar sails for low-thrust trajectory optimization. The objective was to find the required control torque magnitudes in order to steer a solar sail in interplanetary space. A new steering strategy, controlling the solar sail with generic torques applied about the spacecraft body axes, is integrated into the existing low-thrust trajectory optimization software InTrance. This software combines artificial neural networks and evolutionary algorithms to find steering strategies close to the global optimum without an initial guess. Furthermore, we implement a three rotational degree-of-freedom rigid-body attitude dynamics model to represent the solar sail in space. Two interplanetary transfers to Mars and Neptune are chosen to represent typical future solar sail mission scenarios. The results found with the new steering strategy are compared to the existing reference trajectories without attitude dynamics. The resulting control torques required to accomplish the missions are investigated, as they pose the primary requirements to a real on-board attitude control system.},
  language  = {en}
}
@article{BorgmeierBongaertsMeinhardt2012,
  author    = {Borgmeier, Claudia and Bongaerts, Johannes and Meinhardt, Friedhelm},
  title     = {Genetic analysis of the Bacillus licheniformis degSU operon and the impact of regulatory mutations on protease production},
  series = {Journal of biotechnology},
  volume    = {159},
  journal   = {Journal of biotechnology},
  number    = {1-2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4863 (E-Journal); 0168-1656 (Print)},
  doi       = {10.1016/j.jbiotec.2012.02.011},
  pages     = {12 -- 20},
  year      = {2012},
  abstract  = {Disruption experiments targeted at the Bacillus licheniformis degSU operon and GFP-reporter analysis provided evidence for promoter activity immediately upstream of degU. pMutin mediated concomitant introduction of the degU32 allele - known to cause hypersecretion in Bacillus subtilis - resulted in a marked increase in protease activity. Application of 5-fluorouracil based counterselection through establishment of a phosphoribosyltransferase deficient Δupp strain eventually facilitated the marker-free introduction of degU32 leading to further protease enhancement achieving levels as for hypersecreting wild strains in which degU was overexpressed. Surprisingly, deletion of rapG - known to interfere with DegU DNA-binding in B. subtilis - did not enhance protease production neither in the wild type nor in the degU32 strain. The combination of degU32 and Δupp counterselection in the type strain is not only equally effective as in hypersecreting wild strains with respect to protease production but furthermore facilitates genetic strain improvement aiming at biological containment and effectiveness of biotechnological processes.},
  language  = {en}
}
@article{BragardBragard2012,
  author    = {Bragard, G. and Bragard, Michael},
  title     = {Ein kosteng{\"u}nstiges, universelles Modellbauinterface},
  series = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  volume    = {65},
  journal   = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  number    = {5},
  publisher = {Seeberger},
  address   = {Neuss},
  issn      = {0025-5866},
  pages     = {290 -- 293},
  year      = {2012},
  abstract  = {Wir stellen einen USB-Baustein vor, der eine kosteng{\"u}nstige und universelle M{\"o}glichkeit schafft , im Unterricht den Themenkreis Messen-Steuern-Regeln zu behandeln. Die Funktionalit{\"a}t orientiert sich am CVK-Interface der Firma Fischertechnik. Im Gegensatz zu kommerziellen L{\"o}sungen erlaubt unser Aufbau auch den preiswerten Einsatz in Gruppen- oder Einzelarbeit. Abschließend berichten wir {\"u}ber ein Beispiel aus dem Unterrichtseinsatz.},
  language  = {de}
}
@phdthesis{Bragard2012,
  author    = {Bragard, Michael},
  title     = {The integrated emitter turn-off thyristor : an innovative MOS-gated high-power device. - (Aachener Beitr{\"a}ge des ISEA ; 62)},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8440-1152-4},
  pages     = {III, 164 S. : Ill., graph. Darst.},
  year      = {2012},
  abstract  = {This thesis introduces the Integrated Emitter Turn-Off (IETO) Thyristor as a new high-power device. Known state-of-the-art research activities like the Dual GCT, the ETO thyristor and the ICT were presented and critically reviewed. A comparison with commercialized solutions identifies the pros and cons of each type of device family. Based on this analysis, the IETO structure is proposed, covering most benefits of each device class. In particular the combination of a MOS-assisted turn-off with a thyristor-based device allows a voltage-controlled MOS switching and the low on-state voltage of the thyristors. The following synthesis of an IETO device stands on a three-dimensional field of optimization spanned by electric, mechanical and thermal aspects. From an electric point of view, the lowest possible parasitic inductance and resistance within the commutation path are optimization criteria. The mechanical construction has to withstand the required contact pressure of multiple kilo Newtons. Finally, thermal borders limit the maximum average current of the device. FEM simulations covering these three aspects are performed for several design proposals. An IETO prototype is constructed and measurements on various test benches attest thermal, mechanical and electric performance. A local decoupling of the external driver stage and the presspack housing is presented by a cable connection. This separation enables a thermal and mechanical independence, which is advantageous in terms of vibrations and thermal cycles including increased reliability. The electric pulse performance of the prototype device is a factor of 3.1 above today''s solutions. In single-pulse measurements, a current up to 1600 A was successfully turned off at 115°C with an active silicon area of 823 mm². One reason for this increased turn-off capability is the extremely low-inductive construction. Additional functionality of the IETO thyristor like over-current self-protection and defined short-circuit failure state are successfully verified.},
  language  = {en}
}
@article{BragardvanHoekDeDoncker2012,
  author    = {Bragard, Michael and van Hoek, H. and De Doncker, R. W.},
  title     = {A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance},
  series = {IEEE transactions on power electronics},
  volume    = {27},
  journal   = {IEEE transactions on power electronics},
  number    = {9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2012.2189136},
  pages     = {4163 -- 4171},
  year      = {2012},
  abstract  = {This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.},
  language  = {en}
}
@inproceedings{Bung2012,
  author    = {Bung, Daniel B.},
  title     = {Sensitivity of phase detection techniques in aerated chute flows to hydraulic design parameters},
  series = {2nd European IAHR congress : 27. - 29. June 2012, M{\"u}nchen},
  booktitle = {2nd European IAHR congress : 27. - 29. June 2012, M{\"u}nchen},
  publisher = {Lehrstuhl u. Versuchsanst. f{\"u}r Wasserbau u. Wasserwirtschaft d. TU M{\"u}nchen},
  address   = {M{\"u}nchen},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {978-3-943683-03-5},
  pages     = {Artikelkennnummer: B15},
  year      = {2012},
  language  = {en}
}
@inproceedings{BungSunMeirelesetal.2012,
  author    = {Bung, Daniel B. and Sun, Q. and Meireles, I. and Matos, J. and Viseu, T.},
  title     = {USBR type III stilling basin performance for steep stepped spillways},
  series = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  booktitle = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  organization    = {International Symposium on Hydraulic Structures <4, 2012, Porto>},
  isbn      = {978-989-8509-01-7},
  pages     = {Elektronisch publiziert},
  year      = {2012},
  language  = {en}
}
@inproceedings{Butenweg2012,
  author    = {Butenweg, Christoph},
  title     = {Eurocode 8 : Erdbebenauslegung von Tragwerken},
  series = {Eurocodes 2012 kompakt - Chancen nutzen : 36. Darmst{\"a}dter Massivbauseminar Zukunftsf{\"a}higes Planen und Bauen, 7. und 8. M{\"a}rz},
  booktitle = {Eurocodes 2012 kompakt - Chancen nutzen : 36. Darmst{\"a}dter Massivbauseminar Zukunftsf{\"a}higes Planen und Bauen, 7. und 8. M{\"a}rz},
  publisher = {Freunde des Inst. f{\"u}r Massivbau der TU},
  address   = {Darmstadt},
  organization    = {Darmst{\"a}dter Massivbauseminar <36, 2012>},
  pages     = {257 -- 272},
  year      = {2012},
  language  = {de}
}
@techreport{ButenwegDargelHoechstetal.2012,
  author    = {Butenweg, Christoph and Dargel, H.-J. and H{\"o}chst, T. and Holtschoppen, B. and Schwarz, R. and Sippel, M.},
  title     = {Der Lastfall Erdbeben im Anlagenbau : Leitfaden : Entwurf, Bemessung und Konstruktion von Tragwerken und Komponenten in der chemischen Industrie in Anlehnung an die DIN EN 1998-1},
  publisher = {Verband der Chemischen Industrie e.V.},
  address   = {Frankfurt},
  pages     = {20 S.},
  year      = {2012},
  language  = {de}
}
@article{ButenwegFehling2012,
  author    = {Butenweg, Christoph and Fehling, Ekkehard},
  title     = {Hintergrund f{\"u}r die vereinfachten Regeln bei Mauerwerksgeb{\"a}uden im Erdbebenfall},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 16},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201200537},
  pages     = {127 -- 137},
  year      = {2012},
  abstract  = {Bei der Ausarbeitung des nationalen Anwendungsdokumentes zur DIN EN 1998-1 waren die in der ENV-Fassung enthaltenen vereinfachten Regeln im Lichte aktueller Forschungsergebnisse zu {\"u}berpr{\"u}fen und zu {\"u}berarbeiten. Die gleiche Aufgabe stellte sich auch f{\"u}r die Neufassung der DIN 4149. In beiden F{\"a}llen sind neben konstruktiven Regeln f{\"u}r die Art und Anordnung der zur Geb{\"a}udeaussteifung heranzuziehenden W{\"a}nde im Grundriss Tabellen enthalten, die unter bestimmten Bedingungen den Entfall eines rechnerischen Nachweises der Tragw{\"a}nde im Erdbebenfall erm{\"o}glichen. Dies ist f{\"u}r Schwachbebengebiete, wie sie in Deutschland und anderen L{\"a}ndern Mitteleuropas anzutreffen sind, sinnvoll, um unn{\"o}tigen Rechenaufwand sowie Probleme mit der F{\"u}hrbarkeit von Nachweisen so weit wie m{\"o}glich auszuschalten. Im vorliegenden Beitrag werden die Hintergr{\"u}nde der vereinfachten Regeln diskutiert und die Ergebnisse der Anwendung mit verschiedenen Rechenverfahren verglichen und bewertet.},
  language  = {de}
}
@article{ButenwegGellert2012,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Integrale Geb{\"a}udeplanung am Beispiel eines Geschossbaus in Ziegelmauerwerk},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 16},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {5},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201200550},
  pages     = {247 -- 254},
  year      = {2012},
  abstract  = {Moderne Mauerwerksbauten m{\"u}ssen nach heutigen Anforderungen architektonisch, statisch, energetisch sowie schall- und brandschutztechnisch optimal ausgelegt sein. Aufgrund der Komplexit{\"a}t und engen Verzahnung der einzelnen Anforderungen ist eine integrale Geb{\"a}udeplanung zur Erzielung einer qualitativ hochwertigen Bauwerksl{\"o}sung unbedingt notwendig. Diese erfordert von den Fachplanern vertieftes Spezialwissen in den verschiedenen Bereichen, um insbesondere die Schnittstellen und Bauwerksdetails korrekt zu planen und auszuf{\"u}hren. Der Beitrag stellt die integrale Geb{\"a}udeplanung am Beispiel eines Geschossbaus in Ziegelbauweise mit L{\"o}sungen f{\"u}r wesentliche Detailpunkte vor},
  language  = {de}
}
@article{ButenwegHoltschoppen2012,
  author    = {Butenweg, Christoph and Holtschoppen, Britta},
  title     = {Neuer VCI-Leitfaden f{\"u}r die erdbebensichere Auslegung von Industrieanlagen},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  volume    = {Band 87},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S18},
  year      = {2012},
  language  = {de}
}
@incollection{ButenwegRoeser2012,
  author    = {Butenweg, Christoph and Roeser, W.},
  title     = {Erdbebenbemessung von Stahlbetontragwerken nach DIN EN 1998-1},
  series = {Stahlbetonbau aktuell : Praxishandbuch},
  booktitle = {Stahlbetonbau aktuell : Praxishandbuch},
  publisher = {Beuth},
  address   = {Berlin},
  isbn      = {978-3-410-21932-3 (Print) ; 978-341-02193-3-0 (E-Book)},
  pages     = {A.1 -- A.43},
  year      = {2012},
  language  = {de}
}
@article{BaeckerRaueSchusseretal.2012,
  author    = {B{\"a}cker, Matthias and Raue, Markus and Schusser, Sebastian and Jeitner, C. and Breuer, L. and Wagner, P. and Poghossian, Arshak and F{\"o}rster, Arnold and Mang, Thomas and Sch{\"o}ning, Michael Josef},
  title     = {Microfluidic chip with integrated microvalves based on temperature- and pH-responsive hydrogel thin films},
  series = {Physica Status Solidi (a)},
  volume    = {209},
  journal   = {Physica Status Solidi (a)},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201100763},
  pages     = {839 -- 845},
  year      = {2012},
  abstract  = {Two types of microvalves based on temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) and pH-responsive poly(sodium acrylate) (PSA) hydrogel films have been developed and tested. The PNIPAAm and PSA hydrogel films were prepared by means of in situ photopolymerization directly inside the fluidic channel of a microfluidic chip fabricated by combining Si and SU-8 technologies. The swelling/shrinking properties and height changes of the PNIPAAm and PSA films inside the fluidic channel were studied at temperatures of deionized water from 14 to 36 °C and different pH values (pH 3-12) of Titrisol buffer, respectively. Additionally, in separate experiments, the lower critical solution temperature (LCST) of the PNIPAAm hydrogel was investigated by means of a differential scanning calorimetry (DSC) and a surface plasmon resonance (SPR) method. Mass-flow measurements have shown the feasibility of the prepared hydrogel films to work as an on-chip integrated temperature- or pH-responsive microvalve capable to switch the flow channel on/off.},
  language  = {en}
}
@article{Baehr2012,
  author    = {B{\"a}hr, Brigitte},
  title     = {[Gert Hoepner] im Interview zum Thema ; Verpackungspolitik - mehr als H{\"u}lle},
  series = {Packaging journal : Technologie, Logistik, Marketing, Produkte},
  journal   = {Packaging journal : Technologie, Logistik, Marketing, Produkte},
  number    = {5},
  publisher = {Ella Verlag},
  address   = {H{\"u}rth},
  issn      = {1610-0336},
  pages     = {78 -- 80},
  year      = {2012},
  language  = {de}
}
@phdthesis{Buedenbender2012,
  author    = {B{\"u}denbender, Martin},
  title     = {Entflechtungskonzepte f{\"u}r Strom{\"u}bertragungsnetze : ein {\"o}konomischer Vergleich},
  series = {M{\"u}nstersche Schriften zur Kooperation ; Bd. 101},
  journal   = {M{\"u}nstersche Schriften zur Kooperation ; Bd. 101},
  publisher = {Shaker},
  address   = {D{\"u}ren},
  isbn      = {978-3-8440-1460-0},
  pages     = {XVII, 401 S. : Ill., graph. Darst.},
  year      = {2012},
  abstract  = {Netzsektoren und deren ad{\"a}quate Regulierung sind ein sehr relevantes und aktuelles Thema. Dies gilt sowohl f{\"u}r die {\"o}konomische Theorie, die sich sehr intensiv damit auseinandersetzt und in den letzten Jahrzehnten zahlreiche neue Erkenntnisse gewonnen hat. Es gilt ebenso f{\"u}r die Politik, in der Regulierungsfragen kontrovers diskutiert werden und dies nicht nur unter {\"o}konomischen Gesichtspunkten. Es gilt selbstverst{\"a}ndlich f{\"u}r die regulierten Unternehmen selbst, deren T{\"a}tigkeit durch die staatlichen Regulierungsvorgaben markant beeinflusst wird. Nicht nur die konkreten Inhalte der Regulierungsregime sowie die verbleibenden Freiheitsgrade in der Ausgestaltung sind von Bedeutung, sondern ebenso die Umsetzung durch die Regulierungsbeh{\"o}rden. All dies gilt f{\"u}r den Strommarkt und seinen regulatorischen Hintergrund in besonderer Weise. Die Entflechtung der Strom{\"u}bertragungsnetze von der Stromproduktion und damit die Vorgaben f{\"u}r die Organisation der Wertsch{\"o}pfungsketten in den Elektrizit{\"a}tsunternehmen sind seit dem Beginn des europ{\"a}ischen Liberalisierungsprozesses der Stromm{\"a}rkte ein wichtiges und kontrovers diskutiertes Regulierungselement. Den Fokus bildet das vertikale Unbundling, das letztlich die Diskriminierung von Wettbewerbern durch Anbieter mit aggregierten Wertsch{\"o}pfungsketten verhindern soll, indem diese gezwungen werden, ihren "Netzteil" anders zu organisieren oder zu verkaufen. Den Mitgliedsstaaten blieben Freir{\"a}ume in der Ausgestaltung, die in Deutschland erst vor kurzem konkretisiert wurden, und die f{\"u}r die regulierten Unternehmen die Nutzung eines Wahlrechts beinhalten. Der wirtschaftspolitischen folgt nun eine unternehmerische Abw{\"a}gungsentscheidung.},
  language  = {de}
}
@article{ChludekTran2012,
  author    = {Chludek, Astrid and Tran, Duc Hung},
  title     = {Der Reformvorschlag des IAS 12 gem. ED/2009/2 - Ein Pl{\"a}doyer f{\"u}r die Einf{\"u}hrung der valuation allowance},
  series = {KoR Zeitschrift f{\"u}r kapitalmarktorientierte Rechnungslegung},
  journal   = {KoR Zeitschrift f{\"u}r kapitalmarktorientierte Rechnungslegung},
  number    = {1},
  publisher = {Fachmedien Otto Schmidt},
  address   = {D{\"u}sseldorf},
  issn      = {1617-8084},
  pages     = {4 -- 8},
  year      = {2012},
  language  = {de}
}
@article{ChwallekEngelenOswaldetal.2012,
  author    = {Chwallek, Constanze and Engelen, Andreas and Oswald, Monika and Brettel, Malte},
  title     = {Die Wir­kung des F{\"u}h­rungs­ver­hal­tens des Top-Ma­nage­ments auf die un­ter­neh­me­ri­sche Ori­en­tie­rung - ein 5-L{\"a}n­der-Ver­gleich},
  series = {Zfbf : Schmalenbachs Zeitschrift f{\"u}r betriebswirtschaftliche Forschung},
  journal   = {Zfbf : Schmalenbachs Zeitschrift f{\"u}r betriebswirtschaftliche Forschung},
  number    = {2},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  issn      = {0341-2687},
  pages     = {138 -- 165},
  year      = {2012},
  language  = {de}
}
@article{CzarneckiSpiliopoulou2012,
  author    = {Czarnecki, Christian and Spiliopoulou, Myra},
  title     = {A holistic framework for the implementation of a next generation network},
  series = {International Journal of Business Information Systems},
  volume    = {9},
  journal   = {International Journal of Business Information Systems},
  number    = {4},
  publisher = {Inderscience Enterprises},
  address   = {Olney, Bucks},
  issn      = {1746-0972},
  doi       = {10.1504/IJBIS.2012.046291},
  pages     = {385 -- 401},
  year      = {2012},
  abstract  = {As the potential of a next generation network (NGN) is recognised, telecommunication companies consider switching to it. Although the implementation of an NGN seems to be merely a modification of the network infrastructure, it may trigger or require changes in the whole company, because it builds upon the separation between service and transport, a flexible bundling of services to products and the streamlining of the IT infrastructure. We propose a holistic framework, structured into the layers 'strategy', 'processes' and 'information systems' and incorporate into each layer all concepts necessary for the implementation of an NGN, as well as the alignment of these concepts. As a first proof-of-concept for our framework we have performed a case study on the introduction of NGN in a large telecommunication company; we show that our framework captures all topics that are affected by an NGN implementation.},
  language  = {en}
}
@inproceedings{CzarneckiWinkelmannSpiliopoulou2012,
  author    = {Czarnecki, Christian and Winkelmann, Axel and Spiliopoulou, Myra},
  title     = {Transformation in Telecommunication - Analyse und Clustering von Real-life Projekten},
  series = {Multikonferenz Wirtschaftsinformatik 2012},
  booktitle = {Multikonferenz Wirtschaftsinformatik 2012},
  editor    = {Mattfeld, Dirk Christian and Robra-Bissantz, Susanne},
  publisher = {Gito},
  address   = {Berlin},
  isbn      = {9783942183635},
  pages     = {985 -- 998},
  year      = {2012},
  abstract  = {Die Ver{\"a}nderungen des Telekommunikationsmarktes haben in der Praxis zu einer Vielzahl von Transformationsprojekten gef{\"u}hrt. Was geh{\"o}rt aber zu einem "Transformationsprojekt", welche Prozesse und Systeme werden ver{\"a}ndert? Zur Beantwortung dieser Frage haben wir 184 Berichte zu Projekten analysiert, die als "Transformationsprojekte" bezeichnet waren. F{\"u}r die Analyse haben wir einen Kodierungsrahmen konzipiert und anhand dessen die Berichte mit einem hierarchischen Clustering-Verfahren in Themen gruppiert. Die Ergebnisse liefern Hinweise {\"u}ber die in der Praxis gesetzten Schwerpunkte und Priorit{\"a}ten. Sie k{\"o}nnen somit als Unterst{\"u}tzung f{\"u}r Unternehmen dienen, die ein Transformationsprojekt planen. Sie weisen zudem darauf hin, in welchen Bereichen eines Unternehmens Unterst{\"u}tzung durch wissenschaftlich erprobte Werkzeuge und Modelle n{\"o}tig ist.},
  language  = {de}
}
@inproceedings{DachwaldFeldmannEspeetal.2012,
  author    = {Dachwald, Bernd and Feldmann, Marco and Espe, Clemens and Plescher, Engelbert and Konstantinidis, K. and Forstner, R.},
  title     = {Enceladus explorer - A maneuverable subsurface probe for autonomous navigation through deep ice},
  series = {63rd International Astronautical Congress 2012, IAC 2012; Naples; Italy; 1 October 2012 through 5 October 2012. (Proceedings of the International Astronautical Congress, IAC ; 3)},
  booktitle = {63rd International Astronautical Congress 2012, IAC 2012; Naples; Italy; 1 October 2012 through 5 October 2012. (Proceedings of the International Astronautical Congress, IAC ; 3)},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {International Astronautical Congress <63, 2012, Napoli>},
  isbn      = {978-1-62276-979-7},
  pages     = {1756 -- 1766},
  year      = {2012},
  language  = {en}
}
@incollection{DigelMansurovBiisenbaevetal.2012,
  author    = {Digel, Ilya and Mansurov, Zulkhair and Biisenbaev, Makhmut and Savitskaya, Irina and Kistaubaeva, Aida and Akimbekov, Nuraly and Zhubanova, Azhar},
  title     = {Heterogeneous Composites on the Basis of Microbial Cells and Nanostructured Carbonized Sorbents},
  series = {Composites and Their Applications},
  booktitle = {Composites and Their Applications},
  editor    = {Hu, Ning},
  publisher = {Intech},
  address   = {London},
  isbn      = {978-953-51-0706-4},
  doi       = {10.5772/47796},
  pages     = {249 -- 272},
  year      = {2012},
  abstract  = {The fact that microorganisms prefer to grow on liquid/solid phase surfaces rather than in the surrounding aqueous phase was noticed long time ago [1]. Virtually any surface - animal, mineral, or vegetable - is a subject for microbial colonization and subsequent biofilm formation. It would be adequate to name just a few notorious examples on microbial colonization of contact lenses, ship hulls, petroleum pipelines, rocks in streams and all kinds of biomedical implants. The propensity of microorganisms to become surface-bound is so profound and ubiquitous that it vindicates the advantages for attached forms over their free-ranging counterparts [2]. Indeed, from ecological and evolutionary standpoints, for many microorganisms the surface-bound state means dwelling in nutritionally favorable, non-hostile environments [3]. Therefore, in most of natural and artificial ecosystems surface-associated microorganisms vastly outnumber organisms in suspension and often organize into complex communities with features that differ dramatically from those of free cells [4].},
  language  = {en}
}
@book{DigelZhubanovaAkimbekov2012,
  author    = {Digel, Ilya and Zhubanova, Azhar Ahmetovna and Akimbekov, Nuraly Shardarbekovich},
  title     = {Visual Virology},
  address   = {Almaty},
  isbn      = {978-601-247-298-1},
  pages     = {144 S. : zahlr. Ill.},
  year      = {2012},
  language  = {en}
}
@inproceedings{DuongNguyenStaat2012,
  author    = {Duong, Minh Tuan and Nguyen, Nhu Hunyh and Staat, Manfred},
  title     = {Finite Element Implementation of a 3D Fung-type Model},
  series = {ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012},
  booktitle = {ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012},
  publisher = {Verlag d. Technischen Universit{\"a}t Graz},
  address   = {Graz},
  isbn      = {978-3-85125-223-1},
  year      = {2012},
  language  = {en}
}
@inproceedings{DuongNguyenStaat2012,
  author    = {Duong, Minh Tuan and Nguyen, Nhu Huynh and Staat, Manfred},
  title     = {Numerical stability enhancement of modeling hyperelastic materials},
  series = {Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)},
  booktitle = {Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)},
  editor    = {Eberhardsteiner, J.},
  year      = {2012},
  language  = {en}
}
@book{Doeren2012,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {F{\"u}getechnik, Schweißtechnik. Horst-Peter D{\"o}ren (Hrsg.).- 8., aktualis. und erw. Aufl.},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-87155-999-0},
  pages     = {411 S.: Ill., graph. Darst.},
  year      = {2012},
  language  = {de}
}
@article{EilmannRigling2012,
  author    = {Eilmann, Britta and Rigling, Andreas},
  title     = {Tree-growth analyses to estimate tree species' drought tolerance},
  series = {Tree Physiology},
  volume    = {32},
  journal   = {Tree Physiology},
  number    = {2},
  editor    = {Abrams, Marc},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {0829-318X (Print)},
  doi       = {10.1093/treephys/tps004},
  pages     = {178 -- 187},
  year      = {2012},
  abstract  = {Climate change is challenging forestry management and practices. Among other things, tree species with the ability to cope with more extreme climate conditions have to be identified. However, while environmental factors may severely limit tree growth or even cause tree death, assessing a tree species' potential for surviving future aggravated environmental conditions is rather demanding. The aim of this study was to find a tree-ring-based method suitable for identifying very drought-tolerant species, particularly potential substitute species for Scots pine (Pinus sylvestris L.) in Valais. In this inner-Alpine valley, Scots pine used to be the dominating species for dry forests, but today it suffers from high drought-induced mortality. We investigate the growth response of two native tree species, Scots pine and European larch (Larix decidua Mill.), and two non-native species, black pine (Pinus nigra Arnold) and Douglas fir (Pseudotsuga menziesii Mirb. var. menziesii), to drought. This involved analysing how the radial increment of these species responded to increasing water shortage (abandonment of irrigation) and to increasingly frequent drought years. Black pine and Douglas fir are able to cope with drought better than Scots pine and larch, as they show relatively high radial growth even after irrigation has been stopped and a plastic growth response to drought years. European larch does not seem to be able to cope with these dry conditions as it lacks the ability to recover from drought years. The analysis of trees' short-term response to extreme climate events seems to be the most promising and suitable method for detecting how tolerant a tree species is towards drought. However, combining all the methods used in this study provides a complete picture of how water shortage could limit species.},
  language  = {en}
}
@article{EllrichLind2012,
  author    = {Ellrich, Thomas and Lind, Thorsten Patric},
  title     = {Die 'kalte Zwangsverwaltung' durch den Insolvenzverwalter},
  series = {Forderungs-Praktiker : WIKI},
  journal   = {Forderungs-Praktiker : WIKI},
  number    = {1},
  publisher = {FCH},
  address   = {Heidelberg},
  pages     = {16 -- 21},
  year      = {2012},
  language  = {de}
}
@inproceedings{EngelsGabler2012,
  author    = {Engels, Elmar and Gabler, T.},
  title     = {Universelle Programmierschnittstelle f{\"u}r Motion-Logic Systeme},
  series = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  booktitle = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  publisher = {Oldenbourg Industrieverlag},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8356-3305-6},
  pages     = {37 -- 46},
  year      = {2012},
  language  = {de}
}
@inproceedings{EngelsSchnabel2012,
  author    = {Engels, Elmar and Schnabel, Holger},
  title     = {Rapid-control-prototyping of industrial drives for the sercos automation bus},
  series = {13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan \& 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)},
  booktitle = {13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan \& 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)},
  isbn      = {978-1-4673-4771-6},
  pages     = {177 -- 181},
  year      = {2012},
  abstract  = {This article describes the functionality of a MATLAB® library that can be used to develop motion-logic applications in MATLAB programming language for industrial drive and control systems using the well known sercos automation bus. Therewith MATLAB's functionality is extended to designing automation applications from single axis machines up to multi-kinematic robots.},
  language  = {en}
}
@book{Esch2012,
  author    = {Esch, Thomas},
  title     = {Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. 2. Aufl. Bd. 2},
  publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik},
  address   = {Aachen},
  pages     = {Getr. Z{\"a}hlung : zahlr. Ill. und graph. Darst.},
  year      = {2012},
  language  = {de}
}
@incollection{Fabo2012,
  author    = {Fabo, Sabine},
  title     = {Gef{\"a}hrliche Liebschaften : Kunst zwischen Widerstand und Umarmung},
  series = {Interventionen : Grenz{\"u}berschreitungen in {\"A}sthetik, Politik und {\"O}konomie},
  booktitle = {Interventionen : Grenz{\"u}berschreitungen in {\"A}sthetik, Politik und {\"O}konomie},
  editor    = {Hartmann, Doreen},
  publisher = {Fink},
  address   = {M{\"u}nchen},
  isbn      = {978-3-7705-5283-2},
  pages     = {173 -- 189},
  year      = {2012},
  language  = {de}
}
@incollection{Fabo2012,
  author    = {Fabo, Sabine},
  title     = {Einf{\"u}hrung},
  series = {Vielen Dank f{\"u}r Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien},
  booktitle = {Vielen Dank f{\"u}r Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien},
  publisher = {Transcript Verlag},
  address   = {Bielefeld},
  isbn      = {978-3-8376-2170-9},
  pages     = {9 -- 13},
  year      = {2012},
  language  = {de}
}
@incollection{Fabo2012,
  author    = {Fabo, Sabine},
  title     = {Die Kunst der Irritation und ihr Mehrwert},
  series = {Vielen Dank f{\"u}r Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien},
  booktitle = {Vielen Dank f{\"u}r Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien},
  publisher = {Transcript Verlag},
  address   = {Bielefeld},
  isbn      = {978-3-8376-2170-9},
  pages     = {112 -- 145},
  year      = {2012},
  language  = {de}
}
@incollection{Fabo2012,
  author    = {Fabo, Sabine},
  title     = {Gef{\"a}hrliche Liebschaften : Kunst zwischen Wderstand und Umarmung},
  series = {Interventionen : Grenz{\"u}berschreitungen in {\"A}sthetik, Politik und {\"O}konomie},
  booktitle = {Interventionen : Grenz{\"u}berschreitungen in {\"A}sthetik, Politik und {\"O}konomie},
  editor    = {Hartmann, Doreen and [u.a.],},
  publisher = {Fink},
  address   = {M{\"u}nchen [u.a.]},
  isbn      = {978-3-7705-5283-2},
  pages     = {173 -- 189},
  year      = {2012},
  language  = {de}
}
@book{FaboKurz2012,
  author    = {Fabo, Sabine and Kurz, Melanie},
  title     = {Vielen Dank f{\"u}r Ihren Einkauf: Konsumkultur aus Sicht von Design, Kunst und Medien / Sabine Fabo, Melanie Kurz (Hg.)},
  publisher = {transcript},
  address   = {Bielefeld},
  isbn      = {978-3-8394-2170-3},
  doi       = {10.14361/transcript.9783839421703},
  pages     = {184 Seiten ; Illustrationen, Diagramme},
  year      = {2012},
  abstract  = {Auch mit der j{\"u}ngsten Finanzkrise hat die Konsumkultur nichts von ihrer Bedeutung als massenkulturelles Ph{\"a}nomen eingeb{\"u}ßt. Im Gegenteil: Das aktuelle Krisenbewusstsein sucht Halt im Konsum, der seinen Verfechtern noch immer als Modell demokratischer Teilhabe an gesellschaftlicher Produktion gilt. Zugleich ist die Konsumkritik der 1960er Jahre in Richtung eines intelligenten und nachhaltigen Konsums weitergef{\"u}hrt worden, und selbstbewusste Konsumenten treten nun als emanzipierte »Prosumer« und Mitakteure des Marktes auf. Das Buch entwickelt aus Sicht von Design, Kunst, Soziologie, Marketing und Medien neue Perspektiven auf das Ph{\"a}nomen Konsum.},
  language  = {de}
}
@article{FateriHoetterGebhardt2012,
  author    = {Fateri, Miranda and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas},
  title     = {Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting},
  series = {Physics Procedia},
  volume    = {39},
  journal   = {Physics Procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.062},
  pages     = {464 -- 470},
  year      = {2012},
  abstract  = {Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.},
  language  = {en}
}
@incollection{Feiser2012,
  author    = {Feiser, Johannes},
  title     = {Geotechnik},
  series = {Wendehorst Bautechnische Zahlentafeln},
  booktitle = {Wendehorst Bautechnische Zahlentafeln},
  editor    = {Vismann, Ulrich},
  edition   = {34},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0960-5},
  doi       = {10.1007/978-3-8348-8613-2_17},
  pages     = {1221 -- 1332},
  year      = {2012},
  abstract  = {In der nationalen und der europ{\"a}ischen Normung werden die geotechnischen Aufgaben zwecks Mindestanforderungen an Baugrunduntersuchung, rechnerische Nachweise und {\"U}berwachung der Ausf{\"u}hrung in drei Klassen (Kategorien) eingeteilt. Sie richten sich nach der zu erwartenden Reaktion des Baugrundes, nach dem geotechnischen Schwierigkeitsgrad des Tragwerks und seiner Einfl{\"u}sse auf dieUmgebung.},
  language  = {de}
}
@incollection{Feiser2012,
  author    = {Feiser, Johannes},
  title     = {Geotechnik},
  series = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0999-5 ; 978-3-8348-8229-5},
  doi       = {10.1007/978-3-8348-8229-5_14},
  pages     = {453 -- 495},
  year      = {2012},
  language  = {de}
}
@inproceedings{FeldmannPyschnyDoeringetal.2012,
  author    = {Feldmann, Markus and Pyschny, D. and D{\"o}ring, Bernd and Kuhnhenne, Markus},
  title     = {Life cycle assessment of steel constructions},
  series = {Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012},
  booktitle = {Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012},
  publisher = {Taylor and Francis},
  address   = {Hoboken},
  organization    = {International Symposium on Life-Cycle Civil Engineering <3, 2012, Wien>},
  isbn      = {978-0-203-10336-4},
  pages     = {321},
  year      = {2012},
  language  = {en}
}
@inproceedings{FerreinKallweitLautermann2012,
  author    = {Ferrein, Alexander and Kallweit, Stephan and Lautermann, Mark},
  title     = {Towards an autonomous pilot system for a tunnel boring machine},
  series = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  booktitle = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4673-5183-6},
  year      = {2012},
  language  = {en}
}
@article{FerreinMeyer2012,
  author    = {Ferrein, Alexander and Meyer, Thomas},
  title     = {A Brief Overview of Artificial Intelligence in South Africa},
  series = {AI Magazine},
  volume    = {33},
  journal   = {AI Magazine},
  number    = {1},
  publisher = {AAAI},
  address   = {Menlo Park},
  issn      = {0738-4602},
  doi       = {10.1609/aimag.v33i1.2357},
  pages     = {99 -- 101},
  year      = {2012},
  abstract  = {South Africa in recent years is the establishment of a number of research hubs involved in AI activities ranging from mobile robotics and computational intelligence, to knowledge representation and reasoning, and human language technologies. In this survey we take the reader through a quick tour of the research being conducted at these hubs, and touch on an initiative to maintain and extend the current level of interest in AI research in the country.},
  language  = {en}
}
@article{FerreinSteinbauerVassos2012,
  author    = {Ferrein, Alexander and Steinbauer, Gerald and Vassos, Stavros},
  title     = {Action-Based Imperative Programming with YAGI},
  pages     = {24 -- 31},
  year      = {2012},
  abstract  = {Many tasks for autonomous agents or robots are best described by a specification of the environment and a specification of the available actions the agent or robot can perform. Combining such a specification with the possibility to imperatively program a robot or agent is what we call the actionbased imperative programming. One of the most successful such approaches is Golog. In this paper, we draft a proposal for a new robot programming language YAGI, which is based on the action-based imperative programming paradigm. Our goal is to design a small, portable stand-alone YAGI interpreter. We combine the benefits of a principled domain specification with a clean, small and simple programming language, which does not exploit any side-effects from the implementation language. We discuss general requirements of action-based programming languages and outline YAGI, our action-based language approach which particularly aims at embeddability.},
  language  = {en}
}
@inproceedings{FeuerriegelWittenhorstHoffmannetal.2012,
  author    = {Feuerriegel, Uwe and Wittenhorst, Simon and Hoffmann, Ulrich and Pook, Michael},
  title     = {Simulation von W{\"a}rme{\"u}bertragungsprozessen},
  series = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  booktitle = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  publisher = {Oldenbourg Industrieverlag},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8356-3305-6},
  pages     = {127 -- 136},
  year      = {2012},
  language  = {de}
}
@article{FischerKowalskiPudasaini2012,
  author    = {Fischer, Jan-Thomas and Kowalski, Julia and Pudasaini, Shiva P.},
  title     = {Topographic curvature effects in applied avalanche modelling},
  series = {Cold Regions Science and Technology},
  volume    = {74-75},
  journal   = {Cold Regions Science and Technology},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7441},
  doi       = {10.1016/j.coldregions.2012.01.005},
  pages     = {21 -- 30},
  year      = {2012},
  abstract  = {This paper describes the implementation of topographic curvature effects within the RApid Mass MovementS (RAMMS) snow avalanche simulation toolbox. RAMMS is based on a model similar to shallow water equations with a Coulomb friction relation and the velocity dependent Voellmy drag. It is used for snow avalanche risk assessment in Switzerland. The snow avalanche simulation relies on back calculation of observed avalanches. The calibration of the friction parameters depends on characteristics of the avalanche track. The topographic curvature terms are not yet included in the above mentioned classical model. Here, we fundamentally improve this model by mathematically and physically including the topographic curvature effects. By decomposing the velocity dependent friction into a topography dependent term that accounts for a curvature enhancement in the Coulomb friction, and a topography independent contribution similar to the classical Voellmy drag, we construct a general curvature dependent frictional resistance, and thus propose new extended model equations. With three site-specific examples, we compare the apparent frictional resistance of the new approach, which includes topographic curvature effects, to the classical one. Our simulation results demonstrate substantial effects of the curvature on the flow dynamics e.g., the dynamic pressure distribution along the slope. The comparison of resistance coefficients between the two models demonstrates that the physically based extension presents an improvement to the classical approach. Furthermore a practical example highlights its influence on the pressure outline in the run out zone of the avalanche. Snow avalanche dynamics modeling natural terrain curvature centrifugal force friction coefficients.},
  language  = {en}
}
@article{FissabreLohmann2012,
  author    = {Fissabre, Anke and Lohmann, Daniel},
  title     = {Verlust einer „tragenden Wand" : Das Haus der Jugend von Rudolf Schwarz in Aachen},
  series = {Bauwelt},
  volume    = {103},
  journal   = {Bauwelt},
  number    = {45},
  publisher = {Bauverlag BV},
  address   = {G{\"u}tersloh},
  issn      = {0005-6855},
  pages     = {6 -- 7},
  year      = {2012},
  language  = {de}
}
@inproceedings{FissabreSchmidtSonnleitner2012,
  author    = {Fissabre, Anke and Schmidt, Klaus and Sonnleitner, Andrea},
  title     = {Das Lehnsm{\"u}hlschloß in Ortrand - ein s{\"a}chsisches Herrenhaus der Renaissance},
  series = {Wandel im Wohnbau zwischen Gotik und Barock : die s{\"a}chsisch-b{\"o}hmische Entwicklung im {\"u}berregionalen Vergleich},
  booktitle = {Wandel im Wohnbau zwischen Gotik und Barock : die s{\"a}chsisch-b{\"o}hmische Entwicklung im {\"u}berregionalen Vergleich},
  publisher = {Jonas},
  address   = {Marburg},
  isbn      = {978-3-89445-390-9},
  pages     = {487 -- 501},
  year      = {2012},
  language  = {de}
}
@inproceedings{FissabreWilson2012,
  author    = {Fissabre, Anke and Wilson, Ariane},
  title     = {"Lehmbaupropaganda" - Gegens{\"a}tzliche Ideologien {\"u}ber Nachhaltigkeit in der Literatur {\"u}ber den Lehmbau},
  series = {Lehm 2012 : Tagungsbeitr{\"a}ge der 6. Internationalen Fachtagung f{\"u}r Lehmbau = 6th International Conference on Building with Earth},
  booktitle = {Lehm 2012 : Tagungsbeitr{\"a}ge der 6. Internationalen Fachtagung f{\"u}r Lehmbau = 6th International Conference on Building with Earth},
  publisher = {Eigenverl. Dachverband Lehm},
  address   = {Weimar},
  isbn      = {9783000396496},
  pages     = {200 -- 213},
  year      = {2012},
  language  = {de}
}