@inproceedings{MilijašŠakićMarinkovićetal.2021, author = {Milijaš, Aleksa and Šakić, Bogdan and Marinković, Marko and Butenweg, Christoph}, title = {Experimental investigation of behaviour of masonry infilled RC frames under out-of-plane loading}, series = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering}, booktitle = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering}, editor = {Papadrakakis, Manolis and Fragiadakis, Michalis}, publisher = {National Technical University of Athens}, address = {Athen}, isbn = {978-618-85072-5-8}, issn = {2623-3347}, doi = {10.7712/120121.8528.18914}, pages = {829 -- 846}, year = {2021}, abstract = {Masonry infills are commonly used as exterior or interior walls in reinforced concrete (RC) frame structures and they can be encountered all over the world, including earthquake prone regions. Since the middle of the 20th century the behaviour of these non-structural elements under seismic loading has been studied in numerous experimental campaigns. However, most of the studies were carried out by means of in-plane tests, while there is a lack of out-of-plane experimental investigations. In this paper, the out-of-plane tests carried out on full scale masonry infilled frames are described. The results of the out-of-plane tests are presented in terms of force-displacement curves and measured out-of-plane displacements. Finally, the reliability of existing analytical approaches developed to estimate the out-of-plane strength of masonry infills is examined on presented experimental results.}, language = {en} } @inproceedings{ButenwegBursiNardinetal.2021, author = {Butenweg, Christoph and Bursi, Oreste S. and Nardin, Chiara and Lanese, Igor and Pavese, Alberto and Marinković, Marko and Paolacci, Fabrizio and Quinci, Gianluca}, title = {Experimental investigation on the seismic performance of a multi-component system for major-hazard industrial facilities}, series = {Pressure Vessels \& Piping Virtual Conference July 13-15, 2021}, booktitle = {Pressure Vessels \& Piping Virtual Conference July 13-15, 2021}, publisher = {American Society of Mechanical Engineers (ASME)}, address = {New York}, isbn = {9780791885352}, doi = {10.1115/PVP2021-61696}, pages = {8 Seiten}, year = {2021}, abstract = {Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous substances in industrial facilities. Nevertheless, the design of industrial plants is inadequately described in recent codes and guidelines, as they do not consider the dynamic interaction between the structure and the installations and thus the effect of seismic response of the installations on the response of the structure and vice versa. The current code-based approach for the seismic design of industrial facilities is considered not enough for ensure proper safety conditions against exceptional event entailing loss of content and related consequences. Accordingly, SPIF project (Seismic Performance of Multi-Component Systems in Special Risk Industrial Facilities) was proposed within the framework of the European H2020 - SERA funding scheme (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe). The objective of the SPIF project is the investigation of the seismic behaviour of a representative industrial structure equipped with complex process technology by means of shaking table tests. The test structure is a three-story moment resisting steel frame with vertical and horizontal vessels and cabinets, arranged on the three levels and connected by pipes. The dynamic behaviour of the test structure and of its relative several installations is investigated. Furthermore, both process components and primary structure interactions are considered and analyzed. Several PGA-scaled artificial ground motions are applied to study the seismic response at different levels. After each test, dynamic identification measurements are carried out to characterize the system condition. The contribution presents the experimental setup of the investigated structure and installations, selected measurement data and describes the obtained damage. Furthermore, important findings for the definition of performance limits, the effectiveness of floor response spectra in industrial facilities will be presented and discussed.}, language = {en} } @article{ButenwegMarinkovicSalatic2019, author = {Butenweg, Christoph and Marinkovic, Marko and Salatic, Ratko}, title = {Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading}, series = {Bulletin of Earthquake Engineering}, volume = {17}, journal = {Bulletin of Earthquake Engineering}, publisher = {Springer}, address = {Berlin}, issn = {1573-1456}, doi = {10.1007/s10518-019-00602-7}, pages = {3397 -- 3422}, year = {2019}, language = {en} } @article{MarinkovićButenweg2022, author = {Marinković, Marko and Butenweg, Christoph}, title = {Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading}, series = {Construction and Building Materials}, volume = {318}, journal = {Construction and Building Materials}, number = {1}, editor = {Ford, Michael C.}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1879-0526}, doi = {10.1016/j.conbuildmat.2021.126041}, year = {2022}, abstract = {Because of simple construction process, high energy efficiency, significant fire resistance and excellent sound isolation, masonry infilled reinforced concrete (RC) frame structures are very popular in most of the countries in the world, as well as in seismic active areas. However, many RC frame structures with masonry infills were seriously damaged during earthquake events, as the traditional infills are generally constructed with direct contact to the RC frame which brings undesirable infill/frame interaction. This interaction leads to the activation of the equivalent diagonal strut in the infill panel, due to the RC frame deformation, and combined with seismically induced loads perpendicular to the infill panel often causes total collapses of the masonry infills and heavy damages to the RC frames. This fact was the motivation for developing different approaches for improving the behaviour of masonry infills, where infill isolation (decoupling) from the frame has been more intensively studied in the last decade. In-plane isolation of the infill wall reduces infill activation, but causes the need for additional measures to restrain out-of-plane movements. This can be provided by installing steel anchors, as proposed by some researchers. Within the framework of European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in Reinforced Concrete Buildings) the system based on a use of elastomers for in-plane decoupling and steel anchors for out-of-plane restrain was tested. This constructive solution was tested and deeply investigated during the experimental campaign where traditional and decoupled masonry infilled RC frames with anchors were subjected to separate and combined in-plane ‬and out-of-plane loading. Based on a detailed evaluation and comparison of the test results, the performance and effectiveness of the developed system are illustrated.}, language = {en} } @article{ArpshofenGerlingSommeretal.1981, author = {Arpshofen, Ingo and Gerling, Ulrich and Sommer, Ferdinand and Schultheiss, Emil and Predel, Bruno and Pool, M. J.}, title = {Experimentelle Bestimmung der integralen Mischungsenthalpien in den bin{\"a}ren Systemen Pd-Cu und Si-Cu bei 1600 K}, series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 72, H. 12}, journal = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 72, H. 12}, issn = {0044-3093 ; 0179-4841}, pages = {842 -- 846}, year = {1981}, language = {de} } @article{KuhlmannButenwegBettzieche2006, author = {Kuhlmann, Wolfram and Butenweg, Christoph and Bettzieche, Volker}, title = {Experimentelle und numerische Untersuchungen zur baudynamischen Beurteilung von Talsperren}, series = {Wasserwirtschaft : Hydrologie, Wasserbau, Hydromechanik, Gew{\"a}sser, {\"O}kologie, Boden}, volume = {Band 96}, journal = {Wasserwirtschaft : Hydrologie, Wasserbau, Hydromechanik, Gew{\"a}sser, {\"O}kologie, Boden}, number = {Heft 5}, issn = {0043-0978 (E-Journal); 0043-0978 (Print)}, pages = {10 -- 16}, year = {2006}, language = {de} } @inproceedings{KuhlmannButenwegBettziecheetal.2004, author = {Kuhlmann, Wolfram and Butenweg, Christoph and Bettzieche, Volker and Meskouris, Konstantin}, title = {Experimentelle und numerische Untersuchungen zur baudynamischen Beurteilung von Talsperren des Ruhrverbandes}, series = {13. Deutsches Talsperrensymposium in Weimar}, booktitle = {13. Deutsches Talsperrensymposium in Weimar}, organization = {Deutsches Talsperrensymposium <13, 2004, Weimar>}, pages = {1 -- 26}, year = {2004}, language = {de} } @article{BreitbachSchubertAhmed1987, author = {Breitbach, Gerd and Schubert, F. and Ahmed, K.}, title = {Experimentelle und theoretische Untersuchungen zum Kriechbeulen von Rohren aus Ni Cr 22 Co 12 Mo bei 950 Cel / F. Schubert ; K. Ahmed ; G. Breitbach ...}, series = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt der Beitrag der Komponenten- und Grossprobenpr{\"u}fung zur Beurteilung von Bauteilen und Anlagen : [8. - 9. Oktober 1987] / Staatliche Materialpr{\"u}fungsanstalt Universit{\"a}t Stuttgart. - Bd. 2 : Rohrleitungsversagen, Komponenten, Thermoschock, Hochtemperaturverhalten, Beh{\"a}lterintegrit{\"a}t, Schweissverbindungen : (Vortr{\"a}ge 29 - 51)}, journal = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt der Beitrag der Komponenten- und Grossprobenpr{\"u}fung zur Beurteilung von Bauteilen und Anlagen : [8. - 9. Oktober 1987] / Staatliche Materialpr{\"u}fungsanstalt Universit{\"a}t Stuttgart. - Bd. 2 : Rohrleitungsversagen, Komponenten, Thermoschock, Hochtemperaturverhalten, Beh{\"a}lterintegrit{\"a}t, Schweissverbindungen : (Vortr{\"a}ge 29 - 51)}, publisher = {MPA}, address = {Stuttgart}, pages = {42.1 -- 42.18}, year = {1987}, language = {de} } @book{HelsperBesslingKiocketal.1979, author = {Helsper, Christoph and Beßling, Harro and Kiock, R. and Fißan, H. J.}, title = {Experimentelle Untersuchung der Partikelanzahlkonzentration im Windkanal f{\"u}r den Einsatz von laseranemometrischen Verfahren / Beßling, Harro; Kiock, R.; Helsper, C.; Fißan, H. J.}, publisher = {DFVLR}, address = {K{\"o}ln}, pages = {48 S.}, year = {1979}, language = {de} } @book{BreitbachNickelAltes1985, author = {Breitbach, Gerd and Nickel, Manfred and Altes, J{\"u}rgen}, title = {Experimentelle Untersuchungen zur Eignung von Kanalsystemen f{\"u}r Linerleckortung und Dr{\"a}nage in einem Spannbetonbeh{\"a}lter / von M. Nickel ; G. Breitbach ; J. Altes ...}, publisher = {Zentralbibliothek der Kernforschungsanlage}, address = {J{\"u}lich}, pages = {48, [44] S. : Ill., graph. Darst.}, year = {1985}, language = {de} } @article{Mueller2004, author = {M{\"u}ller, Burghard}, title = {Export in den Iran, Libanon und nach Indien : die FH Aachen strebt nach Osten}, series = {Die neue Hochschule : Nachrichten, Meinungen, Berichte. 45 (2004), H. 4-5}, journal = {Die neue Hochschule : Nachrichten, Meinungen, Berichte. 45 (2004), H. 4-5}, isbn = {0340-448x}, pages = {12 -- 15}, year = {2004}, language = {de} } @inproceedings{RensFerreinPoel2008, author = {Rens, Gavin and Ferrein, Alexander and Poel, Etienne van der}, title = {Extending DTGolog to deal with POMD-Ps}, series = {Proceedings of the Nineteenth Annual Symposium of the Pattern Recognition Association of South Africa (PRASA 2008)}, booktitle = {Proceedings of the Nineteenth Annual Symposium of the Pattern Recognition Association of South Africa (PRASA 2008)}, organization = {Pattern Recognition Association of South Africa}, pages = {49 -- 54}, year = {2008}, language = {en} } @inproceedings{BirklDiendorferKernetal.2017, author = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan}, title = {Extrem hohe Blitzstr{\"o}me}, series = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg}, booktitle = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg}, isbn = {978-3-8007-4459-6}, pages = {146 -- 152}, year = {2017}, language = {de} } @article{BirklDiendorferKernetal.2018, author = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan}, title = {Extrem hohe Blitzstr{\"o}me}, series = {Elektropraktiker}, volume = {72}, journal = {Elektropraktiker}, number = {3}, publisher = {Huss Medien}, address = {Berlin}, pages = {217 -- 225}, year = {2018}, abstract = {Blitze sind nach wie vor eine enorme Schadensquelle f{\"u}r Personensch{\"a}den, Br{\"a}nde, mechanische Zerst{\"o}rungen und insbesondere auch {\"U}berspannungen. Das zeigen nicht zuletzt aktuelle Statistiken der Schadensversicherer. Immer wieder gibt es Meldungen {\"u}ber extrem hohe Blitzstr{\"o}me, die nat{\"u}rlich auch zu großen Sch{\"a}den und Zerst{\"o}rungen f{\"u}hren k{\"o}nnen. Dabei werden Scheitelwerte von teilweise deutlich {\"u}ber 300 kA genannt. Dies wirft Fragen auf, da die „klassische" Blitzstatistik (z. B. nach CIGRE und IEC [8][10]) bisher solche Werte nicht kennt. Diese extremen Blitzstr{\"o}me werden meist aus den Daten von Blitzortungssystemen ermittelt.}, language = {de} } @inproceedings{BirklDiendorferKernetal.2018, author = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan}, title = {Extremely high lightning peak currents}, series = {34th International Conference on Ligntning Protection, 02-07 September 2018}, booktitle = {34th International Conference on Ligntning Protection, 02-07 September 2018}, isbn = {978-1-5386-6635-7}, pages = {7 Seiten}, year = {2018}, language = {en} } @article{FoersterAdamMikulicsetal.2002, author = {F{\"o}rster, Arnold and Adam, R. and Mikulics, M. and Schelten, J.}, title = {Fabrication and subpicosecond optical response of low-temperature-grown GaAs freestanding photoconductive devices. Adam, R.; Mikulics, M.; Forster, A.; Schelten, J.; Siegel, M.; Kordos, P.; Zheng, X.; Wu, S.; Sobolewski, R.}, series = {Applied Physics Letters. 81 (2002), H. 18}, journal = {Applied Physics Letters. 81 (2002), H. 18}, isbn = {1077-3118}, pages = {3485 -- 3487}, year = {2002}, language = {en} } @article{FoersterKicinCambeletal.2002, author = {F{\"o}rster, Arnold and Kicin, S and Cambel, V. and Kuliffayova, M.}, title = {Fabrication of GaAs symmetric pyramidal mesas prepared by wet-chemical etching using AlAs interlayer. Kicin, S.; Cambel, V.; Kuliffayova, M.; Gregusova, D.; Kovacova, E.; Novak, J.; Kostic, I.; Forster, A.}, series = {Journal of Applied Physics. 91 (2002), H. 2}, journal = {Journal of Applied Physics. 91 (2002), H. 2}, isbn = {1089-7550}, pages = {878 -- 880}, year = {2002}, language = {en} } @inproceedings{LeichtScholtenSteuerDankertBouffier2016, author = {Leicht-Scholten, Carmen and Steuer-Dankert, Linda and Bouffier, Anna}, title = {Facing Future Challenges: Building Engineers for Tomorrow}, series = {Conference proceedings : new perspectives in science education : 5th Conference edition, Florence, Italy, 17-18 March 2016}, booktitle = {Conference proceedings : new perspectives in science education : 5th Conference edition, Florence, Italy, 17-18 March 2016}, isbn = {978-886292-705-5}, pages = {32 -- 37}, year = {2016}, abstract = {Future engineers are increasingly confronted with the so-called Megatrends which are the big social challenges society has to cope with. These Megatrends, such as "Silver Society", "Globalization", "Mobility" and "Female Shift" require an application-oriented perspective on Diversity especially in the engineering field. Therefore, it is necessary to enable future engineers not only to look at the technical perspectives of a problem, but also to be able to see the related questions within societies they are developing their artefacts for. The aim of teaching engineering should be to prepare engineers for these requirements and to draw attention to the diverse needs in a globalized world. Bringing together technical knowledge and social competences which go beyond a mere training of the so-called "soft skills", is a new approach followed at RWTH Aachen University, one of the leading technical universities in Germany. RWTH Aachen University has established the bridging professorship "Gender and Diversity in Engineering" (GDI) which educates engineers with an interdisciplinary approach to expand engineering limits. In the frame of a sustainable teaching concept the research group under the leadership of Prof. Carmen Leicht-Scholten has developed an approach which imparts a supplication-specific Gender and Diversity expertise to engineers. In workshops students gain theoretical knowledge about Gender and Diversity and learn how to transfer their knowledge in their special field of study and later work. To substantiate this, the course participants have to solve case studies from real life. The cases which are developed in collaboration with non-profit organizations and enterprises from economy rise the students to challenges which are inspired by professional life. Evaluation shows the success of this approach as well as an increasing demand for such teaching formats.}, language = {en} } @article{Goldbach2010, author = {Goldbach, Daniel}, title = {Fahrstabilit{\"a}tserh{\"o}hung bei Gespannen durch Querverschiebung des Anh{\"a}ngerkupplungspunktes}, series = {mechatronik mobil}, volume = {2}, journal = {mechatronik mobil}, number = {1}, publisher = {Expert Verlag}, address = {Renningen}, issn = {1867-7371}, pages = {23 -- 29}, year = {2010}, language = {de} } @article{HelsperMoelterKaminski1989, author = {Helsper, Christoph and M{\"o}lter, W. and Kaminski, S.}, title = {Fast and Automated Testing of Different Air Filter Media / M{\"o}lter, W. ; Helsper, C. ; Kaminski, S.}, series = {1. Europ{\"a}isches Symposium Partikelabscheidung aus Gasen : [PARTEC, N{\"u}rnberg, West Germany, 19. - 21. April 1989 ; preprints] = 1. European Symposium Separation of Particles from Gases / [Organisation und Durchf{\"u}hrung: N{\"u}rnbergMesse]. Hrsg. von: Friedrich L{\"o}ffler}, journal = {1. Europ{\"a}isches Symposium Partikelabscheidung aus Gasen : [PARTEC, N{\"u}rnberg, West Germany, 19. - 21. April 1989 ; preprints] = 1. European Symposium Separation of Particles from Gases / [Organisation und Durchf{\"u}hrung: N{\"u}rnbergMesse]. Hrsg. von: Friedrich L{\"o}ffler}, publisher = {N{\"u}rnbergMesse}, address = {N{\"u}rnberg}, pages = {441 -- 457}, year = {1989}, language = {en} } @article{HelsperMoelterKaminski1989, author = {Helsper, Christoph and M{\"o}lter, W. and Kaminski, S.}, title = {Fast and Automated Testing of Different Air Filter Media / M{\"o}lter, W. ; Helsper, C. ; Kaminski, S.}, series = {Proceedings of the Filtech Conference, Karlsruhe 1989, Vol. 1}, journal = {Proceedings of the Filtech Conference, Karlsruhe 1989, Vol. 1}, publisher = {Filtration Society}, address = {Oadby}, pages = {125 -- 136}, year = {1989}, language = {en} } @article{HelsperMoelterWillemer1987, author = {Helsper, Christoph and M{\"o}lter, W. and Willemer, W.}, title = {Fast and Automated Testing of Filter Media / M{\"o}lter, W. ; Helsper, C. ; Willemer, W.}, series = {FILTECH Conference 1987 : Utrecht, Holland; September 23 - 25 1987 / org. by the Filtration Society , Vol. 1.}, journal = {FILTECH Conference 1987 : Utrecht, Holland; September 23 - 25 1987 / org. by the Filtration Society , Vol. 1.}, publisher = {Filtration Society}, address = {Loughborough}, pages = {106 -- 112}, year = {1987}, language = {en} } @article{HelsperMoelterKaminski1992, author = {Helsper, Christoph and M{\"o}lter, W. and Kaminski, S.}, title = {Fast, Automated Testing of Different Air Filter Media / M{\"o}lter, W. ; Helsper, C. ; Kaminski, S.}, series = {Filtration and Separation. 29 (1992), H. 1}, journal = {Filtration and Separation. 29 (1992), H. 1}, isbn = {0015-1882}, pages = {45 -- 50}, year = {1992}, language = {en} } @article{FrauenrathHezelHeinrichsetal.2009, author = {Frauenrath, Tobias and Hezel, Fabian and Heinrichs, Uwe and Kozerke, Sebastian and Utting, Jane and Kob, Malte and Butenweg, Christoph and Boesiger, Peter and Niendorf, Thoralf}, title = {Feasibility of Cardiac Gating Free of Interference With Electro-Magnetic Fields at 1.5 Tesla, 3.0 Tesla and 7.0 Tesla Using an MR-Stethoscope}, series = {Investigative Radiology}, volume = {44}, journal = {Investigative Radiology}, number = {9}, publisher = {Lippincott Williams \& Wilkins ; (via Ovid)}, address = {Philadelphia, Pa}, issn = {1536-0210 (online)}, doi = {10.1097/RLI.0b013e3181b4c15e}, pages = {539 -- 547}, year = {2009}, language = {en} } @article{VitusevichFoersterReetzetal.2000, author = {Vitusevich, S. A. and F{\"o}rster, Arnold and Reetz, W. and L{\"u}th, H. and Belyaev, A. E. and Danylyuk, S. V.}, title = {Fine structure of photoresponse spectra in a double-barrier resonant tunnelling diode}, series = {Nanotechnology. 11 (2000), H. 4}, journal = {Nanotechnology. 11 (2000), H. 4}, isbn = {1361-6528}, pages = {305 -- 308}, year = {2000}, language = {en} } @inproceedings{MartinBergHardtetal.1979, author = {Martin, S. and Berg, G. and Hardt, Arno and H{\"u}rlimann, W. and K{\"o}hler, M. and Meißberger, J. and Sagefka, T. and Schult, O. W. B.}, title = {First experience with the magnet spectrometer 'BIG KARL'}, series = {Use of magnetic spectrometers in nuclear physics : proceedings of the Daresbury study weekend 10 - 11 March 1979}, booktitle = {Use of magnetic spectrometers in nuclear physics : proceedings of the Daresbury study weekend 10 - 11 March 1979}, editor = {Sanderson, N. E.}, publisher = {Daresbury Lab.}, address = {Daresbury}, pages = {38 -- 42}, year = {1979}, language = {en} } @article{HoylerBauskeArias1993, author = {Hoyler, Friedrich and Bauske, I. and Arias, J. M.}, title = {First observation of scissors mode states in an odd-mass nucleus / I. Bauske ; J. M. Arias ... F. Hoyler ...}, series = {Physical review letters. 71 (1993), H. 7}, journal = {Physical review letters. 71 (1993), H. 7}, isbn = {0031-9007}, pages = {975 -- 978}, year = {1993}, language = {en} } @incollection{HebelHerrmannRitzetal.2022, author = {Hebel, Christoph and Herrmann, Ulf and Ritz, Thomas and R{\"o}th, Thilo and Anthrakidis, Anette and B{\"o}ker, J{\"o}rg and Franzke, Till and Grodzki, Thomas and Merkens, Torsten and Sch{\"o}ttler, Mirjam}, title = {FlexSHARE - Methodisches Framework zur innovativen Gestaltung der urbanen Mobilit{\"a}t durch Sharing- Angebote}, series = {Transforming Mobility - What Next?}, booktitle = {Transforming Mobility - What Next?}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3-658-36429-8}, doi = {10.1007/978-3-658-36430-4_10}, pages = {153 -- 169}, year = {2022}, abstract = {Das Ziel des INTERREG-Projektes „SHAREuregio" (FKZ: 34.EFRE-0300134) ist es, grenz{\"u}berschreitende Mobilit{\"a}t in der Euregio Rhein-Maas-Nord zu erm{\"o}glichen und zu f{\"o}rdern. Dazu soll ein elektromobiles Car- und Bikesharing- System entwickelt und in der Stadt M{\"o}nchengladbach, im Kreis Viersen sowie in den Gemeinden Roermond und Venlo (beide NL) zusammen mit den Partnern Wirtschaftsf{\"o}rderung M{\"o}nchengladbach, Wirtschaftsf{\"o}rderung f{\"u}r den Kreis Viersen, NEW AG, Goodmoovs (NL), Greenflux (NL) und der FH Aachen implementiert werden. Zun{\"a}chst richtet sich das Angebot, bestehend aus 40 Elektroautos und 40 Elektrofahrr{\"a}dern, an Unternehmen und wird nach einer Erprobungsphase, mit einer gr{\"o}ßeren Anzahl an Fahrzeugen, auch f{\"u}r Privatpersonen verf{\"u}gbar gemacht werden. Die Fahrzeuge stehen bei den jeweiligen Anwendungspartnern in Deutschland und den Niederlanden. Im Rahmen dieses Projektes hat die FH Aachen „FlexSHARE" entwickelt - ein methodisches Framework zur innovativen Gestaltung urbaner Sharing- Angebote. Das Framework erm{\"o}glicht es, anhand von messbaren Kenngr{\"o}ßen, bedarfsgerechte und auf die Region abgestimmte Sharing-Systeme zu entwickeln.}, language = {de} } @article{PauksztatKuperjansMeyer2005, author = {Pauksztat, Anja and Kuperjans, Isabel and Meyer, J{\"o}rg}, title = {Formeln statt Zahlen : Referenzwerte Formeln zur energetischen Bewertung von Produktionsanlagen}, series = {BWK : das Energie-Fachmagazin}, volume = {57}, journal = {BWK : das Energie-Fachmagazin}, number = {12}, issn = {0006-9612}, pages = {52 -- 55}, year = {2005}, language = {de} } @article{SchwarzerGoettscheJellinghaus2006, author = {Schwarzer, Klemens and G{\"o}ttsche, Joachim and Jellinghaus, Sabine}, title = {FORSCHUNG UND TECHNIK - Messtechnik - Was will der Nutzer? - Eine langfristige Studie hat Nutzer zu einer Farblichtsteuerung befragt. Teil 1: Untersuchungsdesign, Leuchtenentwicklung und Messwerterfassung}, series = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 7-8}, journal = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 7-8}, isbn = {0024-2861}, pages = {754 -- 759}, year = {2006}, language = {de} } @article{SchwarzerGoettscheJellinghaus2006, author = {Schwarzer, Klemens and G{\"o}ttsche, Joachim and Jellinghaus, Sabine}, title = {FORSCHUNG UND TECHNIK - Messtechnik - Was will der Nutzer? Eine langfristige Studie hat Nutzer zu einer Farblichtsteuerung befragt (Teil 2)}, series = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 9}, journal = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 9}, isbn = {0024-2861}, pages = {862 -- 867}, year = {2006}, language = {de} } @article{FleischhakerEvers2008, author = {Fleischhaker, Robert and Evers, J{\"o}rg}, title = {Four-wave mixing enhanced white-light cavity}, series = {Physical Review A - Atomic, molecular, and optical physics}, volume = {78}, journal = {Physical Review A - Atomic, molecular, and optical physics}, number = {5}, issn = {0556-2791}, pages = {051802(R)}, year = {2008}, language = {en} } @inproceedings{RajanButenwegDalgueretal.2017, author = {Rajan, S. and Butenweg, Christoph and Dalguer, L. A. and An, J. H. and Renault, P. and Klinkel, S.}, title = {Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013}, series = {16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017}, booktitle = {16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017}, publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)}, year = {2017}, language = {en} } @inproceedings{MichelButenwegKlinkel2018, author = {Michel, Philipp and Butenweg, Christoph and Klinkel, Sven}, title = {Frequency Dependent Impedance Analysis of the Foundation-Soil-Systems of Onshore Wind Turbines}, series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018}, booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018}, pages = {1 -- 13}, year = {2018}, language = {en} } @incollection{GoldbachHochrein2011, author = {Goldbach, Daniel and Hochrein, Ulrich}, title = {Functional Safety Management und Analysemethoden in der Entwicklung eines sicherheitskritischen Systems im Automobil}, series = {Diagnose in mechatronischen Fahrzeugsystemen IV : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : [anl{\"a}sslich der 5. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen"]}, booktitle = {Diagnose in mechatronischen Fahrzeugsystemen IV : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : [anl{\"a}sslich der 5. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen"]}, publisher = {Expert Verlag}, address = {Renningen}, isbn = {978-3-8169-3068-6}, pages = {175 -- 194}, year = {2011}, language = {de} } @article{LandersKern2011, author = {Landers, Ernst Ulrich and Kern, Alexander}, title = {Future evolution of risk management for structures : Advancement for the future IEC 62305-2 Ed3}, publisher = {IEEE}, address = {New York}, pages = {1 -- 6}, year = {2011}, language = {en} } @book{Doeren2004, author = {D{\"o}ren, Horst-Peter}, title = {F{\"u}getechnik, Schweißtechnik / Horst-Peter D{\"o}ren (Hrsg.).- 6. Aufl.}, publisher = {DVS Verl.}, address = {D{\"u}sseldorf}, isbn = {3-87155-786-2}, pages = {392 S.}, year = {2004}, language = {de} } @book{Doeren2007, author = {D{\"o}ren, Horst-Peter}, title = {F{\"u}getechnik, Schweißtechnik / Horst-Peter D{\"o}ren (Hrsg.).- 7., aktualis. Aufl.}, publisher = {DVS Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-87155-907-5}, pages = {392 S.}, year = {2007}, language = {de} } @book{Doeren2012, author = {D{\"o}ren, Horst-Peter}, title = {F{\"u}getechnik, Schweißtechnik. Horst-Peter D{\"o}ren (Hrsg.).- 8., aktualis. und erw. Aufl.}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, isbn = {978-3-87155-999-0}, pages = {411 S.: Ill., graph. Darst.}, year = {2012}, language = {de} } @article{FoersterKohleickLueth1993, author = {F{\"o}rster, Arnold and Kohleick, R. and L{\"u}th, H.}, title = {Ga segregation and the effect of Si and Ge interlayers at the GaAs(100)/AlAs heterostructure / R. Kohleick ; A. F{\"o}rster ; H. L{\"u}th}, series = {Physical Review B . 48 (1993), H. 20}, journal = {Physical Review B . 48 (1993), H. 20}, isbn = {0163-1829}, pages = {15138 -- 15143}, year = {1993}, language = {en} } @article{HoylerHamadaHamilton1987, author = {Hoyler, Friedrich and Hamada, S. A. and Hamilton, W. D.}, title = {Gamma-gamma directional correlation measurements in 84Kr following thermal neutron capture by natural krypton / S. A. Hamada ; W. D. Hamilton ; F. Hoyler}, series = {Journal of physics / G. 13 (1987), H. 9}, journal = {Journal of physics / G. 13 (1987), H. 9}, isbn = {0305-4616}, pages = {1143 -- 1163}, year = {1987}, language = {en} } @book{BreitbachDavidNickel1984, author = {Breitbach, Gerd and David, H.-P. and Nickel, M.}, title = {Gasaustausch zwischen einem Helium enthaltenden Beh{\"a}lter und der Umgebung {\"u}ber ein nach unten abgehendes Rohr und dessen Relevanz f{\"u}r den HTR-Modul / [KFA, Kernforschungsanlage J{\"u}lich, GmbH, Inst. f{\"u}r Nukleare Sicherheitsforschung]}, publisher = {Zentralbibliothek der Kernforschungsanlage}, address = {J{\"u}lich}, pages = {16, 14 S. : 14 Ill. u. graph. Darst.}, year = {1984}, language = {de} } @book{MeskourisRenaultButenwegetal.2007, author = {Meskouris, Konstantin and Renault, Philippe and Butenweg, Christoph and Hinzen, Klaus-G. and Weber, Bernd}, title = {Gef{\"a}hrdungsabsch{\"a}tzung von Br{\"u}cken in Deutschland unter Erdbebenbelastung. [Bericht zum Forschungs- und Entwicklungsvorhaben FE 15.393/2003/FRB des Bundesministeriums f{\"u}r Verkehr, Bau und Stadtentwicklung.] (Forschung Straßenbau und Straßenverkehrstechnik ; 952)}, publisher = {Bundesministerium f{\"u}r Verkehr, Bau und Stadtentwicklung, Abt. Straßenbau, Straßenverkehr}, address = {Bonn}, isbn = {978-3-86509-602-9}, pages = {80 S.}, year = {2007}, language = {de} } @article{ThielemannSchaffner1996, author = {Thielemann, Frank and Schaffner, M.}, title = {Gemeinsam sind wir stark . Schaffner, M.; Thielemann, F.}, series = {Print \& Produktion. 9 (1996), H. 10}, journal = {Print \& Produktion. 9 (1996), H. 10}, isbn = {0944-7482}, pages = {28 -- f.}, year = {1996}, language = {de} } @article{FoersterMikulicsSiebeetal.2002, author = {F{\"o}rster, Arnold and Mikulics, M. and Siebe, F. and Fox, A.}, title = {Generation of 460 GHz radiation by photomixing in low-temperature-grown MBE GaAs. Mikulics, M.; Siebe, F.; Fox, A.; Marso, M.; Forster, A.; Stuer, H.; Schafer, F.; Gusten, R.; Kordos, P.}, series = {Conference proceedings : Smolenice Castle, Slovakia, October 14 - 16, 2002 / [organizers: Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by Juraj Breza}, journal = {Conference proceedings : Smolenice Castle, Slovakia, October 14 - 16, 2002 / [organizers: Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by Juraj Breza}, publisher = {IEEE Operations Center}, address = {Piscataway, NJ}, isbn = {0-7803-7276-X}, pages = {129 -- 132}, year = {2002}, language = {en} } @article{MikulicsCamaraHardtetal.2004, author = {Mikulics, M. and Camara, I. and Hardt, A. van der and Fox, A. and F{\"o}rster, Arnold and Gusten, R. and L{\"u}th, H. and Kordos, P.}, title = {Generation of THz radiation by photomixing in low-temperature-grown MBE GaAs}, series = {Fifth International Conference on Advanced Semiconductor Devices and Microsystems : conference proceedings ; Smolenice Castle, Slovakia, October 17 - 21, 2004 / [organizers: Institute of Electrical Engineering, Slovak Academy of Sciences, Bratislava and Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by J. Osvald}, journal = {Fifth International Conference on Advanced Semiconductor Devices and Microsystems : conference proceedings ; Smolenice Castle, Slovakia, October 17 - 21, 2004 / [organizers: Institute of Electrical Engineering, Slovak Academy of Sciences, Bratislava and Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by J. Osvald}, publisher = {IEEE Operations Center}, address = {Piscataway, NJ}, isbn = {0-7803-8335-7}, pages = {231 -- 234}, year = {2004}, language = {en} } @inproceedings{HellmannsHesse2007, author = {Hellmanns, Mark and Hesse, Joachim}, title = {Ger{\"a}uschminderung und Leichtbau in Leistungsgetrieben durch den Einsatz von Werkstoffverbunden}, series = {Hybride Maschinenkonzepte und intelligente Verfahren zur Fertigung von High-Tech-Produkten : Erfolgsbeispiele zur Standortsicherung in Hochlohnl{\"a}ndern : InnoNet Kolloquium am 7. und 8.11.2007, Technologiezentrum am Europaplatz Aachen}, booktitle = {Hybride Maschinenkonzepte und intelligente Verfahren zur Fertigung von High-Tech-Produkten : Erfolgsbeispiele zur Standortsicherung in Hochlohnl{\"a}ndern : InnoNet Kolloquium am 7. und 8.11.2007, Technologiezentrum am Europaplatz Aachen}, pages = {1 -- 46}, year = {2007}, language = {de} } @techreport{HellmannsHesse2007, author = {Hellmanns, Mark and Hesse, Joachim}, title = {Ger{\"a}uschminderung und Leichtbau in Leistungsgetrieben durch den Einsatz von Werkstoffverbunden : Abschlussbericht zu Nr. 3.1 : Berichtszeitraum: 1.3.2005 - 31.8.2007}, publisher = {Bundesministerium f{\"u}r Wirtschaft und Arbeit (BMWi)}, address = {Berlin}, pages = {66 S.}, year = {2007}, language = {de} } @incollection{BorchertBremen2014, author = {Borchert, J{\"o}rg and Bremen, Frank}, title = {Gesch{\"a}fts- und Organisationsmodelle f{\"u}r ein Strom- und Gas-Portfoliomanagement}, series = {Optimierte Strom- und Gasbeschaffung in der Energiewirtschaftsbranche}, booktitle = {Optimierte Strom- und Gasbeschaffung in der Energiewirtschaftsbranche}, publisher = {KS-Energy-Verl.}, address = {Berlin}, isbn = {978-3-9813142-9-8}, pages = {11 -- 28}, year = {2014}, language = {de} } @article{KuperjansEsserMeyeretal.2000, author = {Kuperjans, Isabel and Esser, J. and Meyer, J{\"o}rg and Donner, O.}, title = {Gestaltung und Bewertung von Energieanlagen unter {\"o}kologischen, wirtschaftlichen und technischen Gesichtspunkten}, series = {Umweltwirtschaftsforum : UWF}, volume = {8}, journal = {Umweltwirtschaftsforum : UWF}, number = {3}, issn = {0943-3481}, pages = {53 -- 58}, year = {2000}, language = {de} }