@article{KarschuckFilipovBollellaetal.2019,
  author    = {Karschuck, T. L. and Filipov, Y. and Bollella, P. and Sch{\"o}ning, Michael Josef and Katz, E.},
  title     = {Not-XOR (NXOR) logic gate based on an enzyme-catalyzed reaction},
  series = {International Journal of Unconventional Computing},
  volume    = {14},
  journal   = {International Journal of Unconventional Computing},
  number    = {3-4},
  publisher = {Old City Publishing},
  address   = {Philadelphia},
  issn      = {1548-7199},
  pages     = {235 -- 242},
  year      = {2019},
  abstract  = {Enzyme-catalyzed reactions have been designed to mimic various Boolean logic gates in the general framework of unconventional biomolecular computing. While some of the logic gates, particularly OR, AND, are easy to realize with biocatalytic reactions and have been reported in numerous publications, some other, like NXOR, are very challenging and have not been realized yet with enzyme reactions. The paper reports on a novel approach to mimicking the NXOR logic gate using the bell-shaped enzyme activity dependent on pH values. Shifting pH from the optimum value to the acidic or basic values by using acid or base inputs (meaning 1,0 and 0,1 inputs) inhibits the enzyme reaction, while keeping the optimum pH (assuming 0,0 and 1,1 input combinations) preserves a high enzyme activity. The challenging part of the present approach is the selection of an enzyme with a well-demonstrated bell-shape activity dependence on the pH value. While many enzymes can satisfy this condition, we selected pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase as this enzyme has the optimum pH center-located on the pH scale allowing the enzyme activity change by the acidic and basic pH shift from the optimum value corresponding to the highest activity. The present NXOR gate is added to the biomolecular "toolbox" as a new example of Boolean logic gates based on enzyme reactions.},
  language  = {en}
}
@inproceedings{MahdiRendonSchwageretal.2019,
  author    = {Mahdi, Zahra and Rend{\´o}n, Carlos and Schwager, Christian and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Novel concept for indirect solar-heated methane reforming},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {0094-243X},
  doi       = {10.1063/1.5117694},
  pages     = {180014-1 -- 180014-7},
  year      = {2019},
  language  = {en}
}
@article{FunkeBeckmannKeinzetal.2019,
  author    = {Funke, Harald and Beckmann, Nils and Keinz, Jan and Abanteriba, Sylvester},
  title     = {Numerical and Experimental Evaluation of a Dual-Fuel Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications},
  series = {Journal of Thermal Science and Engineering Applications},
  volume    = {11},
  journal   = {Journal of Thermal Science and Engineering Applications},
  number    = {1},
  publisher = {ASME},
  address   = {New York},
  issn      = {19485085},
  doi       = {10.1115/1.4041495},
  pages     = {011015},
  year      = {2019},
  language  = {en}
}
@article{ValeroVitiGualtieri2019,
  author    = {Valero, Daniel and Viti, Nicolo and Gualtieri, Carlo},
  title     = {Numerical Simulation of Hydraulic Jumps. Part 1: Experimental Data for Modelling Performance Assessment},
  series = {Water},
  volume    = {11},
  journal   = {Water},
  number    = {1},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2073-4441},
  doi       = {10.3390/w11010036},
  pages     = {Art. Nr. 36},
  year      = {2019},
  language  = {en}
}
@article{VitiValeroGualtieri2019,
  author    = {Viti, Nicolo and Valero, Daniel and Gualtieri, Carlo},
  title     = {Numerical Simulation of Hydraulic Jumps. Part 2: Recent Results and Future Outlook},
  series = {Water},
  volume    = {11},
  journal   = {Water},
  number    = {1},
  issn      = {2073-4441},
  doi       = {10.3390/w11010028},
  pages     = {Art. Nr. 28},
  year      = {2019},
  language  = {en}
}
@inproceedings{StrieganStruthDickhoffetal.2019,
  author    = {Striegan, Constantin J. D. and Struth, Benjamin and Dickhoff, Jens and Kusterer, Karsten and Funke, Harald and Bohn, Dieter},
  title     = {Numerical Simulations of the Micromix DLN Hydrogen Combustion Technology with LES and Comparison to Results of RANS and Experimental Data},
  series = {Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan.},
  booktitle = {Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan.},
  isbn      = {978-4-89111-010-9},
  pages     = {1 -- 9},
  year      = {2019},
  language  = {en}
}
@article{RossiHoltschoppenButenweg2019,
  author    = {Rossi, Leonardo and Holtschoppen, Britta and Butenweg, Christoph},
  title     = {Official data on the economic consequences of the 2012 Emilia-Romagna earthquake: a first analysis of database SFINGE},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  number    = {9},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007\%2Fs10518-019-00655-8},
  pages     = {4855 -- 4884},
  year      = {2019},
  language  = {en}
}
@article{Gaigall2019,
  author    = {Gaigall, Daniel},
  title     = {On a new approach to the multi-sample goodness-of-fit problem},
  series = {Communications in Statistics - Simulation and Computation},
  volume    = {53},
  journal   = {Communications in Statistics - Simulation and Computation},
  number    = {10},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1532-4141},
  doi       = {10.1080/03610918.2019.1618472},
  pages     = {2971 -- 2989},
  year      = {2019},
  abstract  = {Suppose we have k samples X₁,₁,…,X₁,ₙ₁,…,Xₖ,₁,…,Xₖ,ₙₖ with different sample sizes ₙ₁,…,ₙₖ and unknown underlying distribution functions F₁,…,Fₖ as observations plus k families of distribution functions {G₁(⋅,ϑ);ϑ∈Θ},…,{Gₖ(⋅,ϑ);ϑ∈Θ}, each indexed by elements ϑ from the same parameter set Θ, we consider the new goodness-of-fit problem whether or not (F₁,…,Fₖ) belongs to the parametric family {(G₁(⋅,ϑ),…,Gₖ(⋅,ϑ));ϑ∈Θ}. New test statistics are presented and a parametric bootstrap procedure for the approximation of the unknown null distributions is discussed. Under regularity assumptions, it is proved that the approximation works asymptotically, and the limiting distributions of the test statistics in the null hypothesis case are determined. Simulation studies investigate the quality of the new approach for small and moderate sample sizes. Applications to real-data sets illustrate how the idea can be used for verifying model assumptions.},
  language  = {en}
}
@inproceedings{FingerGoettenBraunetal.2019,
  author    = {Finger, Felix and G{\"o}tten, Falk and Braun, Carsten and Bil, C.},
  title     = {On Aircraft Design Under the Consideration of Hybrid-Electric Propulsion Systems},
  series = {APISAT 2018: The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018)},
  booktitle = {APISAT 2018: The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018)},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-13-3305-7},
  doi       = {10.1007/978-981-13-3305-7_99},
  pages     = {1261 -- 1272},
  year      = {2019},
  abstract  = {A hybrid-electric propulsion system combines the advantages of fuel-based systems and battery powered systems and offers new design freedom. To take full advantage of this technology, aircraft designers must be aware of its key differences, compared to conventional, carbon-fuel based, propulsion systems. This paper gives an overview of the challenges and potential benefits associated with the design of aircraft that use hybrid-electric propulsion systems. It offers an introduction of the most popular hybrid-electric propulsion architectures and critically assess them against the conventional and fully electric propulsion configurations. The effects on operational aspects and design aspects are covered. Special consideration is given to the application of hybrid-electric propulsion technology to both unmanned and vertical take-off and landing aircraft. The authors conclude that electric propulsion technology has the potential to revolutionize aircraft design. However, new and innovative methods must be researched, to realize the full benefit of the technology.},
  language  = {en}
}
@article{BaringhausGaigall2019,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {On an asymptotic relative efficiency concept based on expected volumes of confidence regions},
  series = {Statistics - A Journal of Theoretical and Applied Statistic},
  volume    = {53},
  journal   = {Statistics - A Journal of Theoretical and Applied Statistic},
  number    = {6},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1029-4910},
  doi       = {10.1080/02331888.2019.1683560},
  pages     = {1396 -- 1436},
  year      = {2019},
  abstract  = {The paper deals with an asymptotic relative efficiency concept for confidence regions of multidimensional parameters that is based on the expected volumes of the confidence regions. Under standard conditions the asymptotic relative efficiencies of confidence regions are seen to be certain powers of the ratio of the limits of the expected volumes. These limits are explicitly derived for confidence regions associated with certain plugin estimators, likelihood ratio tests and Wald tests. Under regularity conditions, the asymptotic relative efficiency of each of these procedures with respect to each one of its competitors is equal to 1. The results are applied to multivariate normal distributions and multinomial distributions in a fairly general setting.},
  language  = {en}
}
@inproceedings{EichlerSkupinThurnetal.2019,
  author    = {Eichler, Fabian and Skupin, Marco and Thurn, Laura and Kasch, Susanne and Schmidt, Thomas},
  title     = {Operating limits for beam melting of glass materials},
  series = {Modern Technologies in Manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2019)},
  number    = {Article 01004},
  doi       = {10.1051/matecconf/201929901004},
  pages     = {8 Seiten},
  year      = {2019},
  abstract  = {Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.},
  language  = {en}
}
@inproceedings{BaaderKellerLehmannetal.2019,
  author    = {Baader, Fabian and Keller, Denis and Lehmann, Raphael and Gerber, Lukas and Reiswich, Martin and Dachwald, Bernd and F{\"o}rstner, Roger},
  title     = {Operating melting probes for ice penetration under sublimation conditions and in reduced gravity on a sounding rocket},
  series = {Proceedings of the 24th ESA Symposium on European Rocket and Balloon Programmes and related Research},
  booktitle = {Proceedings of the 24th ESA Symposium on European Rocket and Balloon Programmes and related Research},
  issn      = {0379-6566},
  pages     = {8 Seiten},
  year      = {2019},
  language  = {en}
}
@article{JungMuellerStaat2019,
  author    = {Jung, Alexander and M{\"u}ller, Wolfram and Staat, Manfred},
  title     = {Optimization of the flight technique in ski jumping: the influence of wind},
  number    = {Early view},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.jbiomech.2019.03.023},
  year      = {2019},
  language  = {en}
}
@misc{OPUS4-10963,
  title     = {Ordnung zur Aufhebung der Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Elektrotechnik" (zuvor „Nachrichtentechnik" und „Elektrotechnik und Informationstechnik") vom 22. Januar 2010 (FH-Mitteilung Nr. 7/2010), zuletzt ge{\"a}ndert durch {\"A}nderungsordnung vom 25. April 2016 (FH-Mitteilung Nr. 31/2016) : vom 20. Dezember 2019},
  organization    = {FH Aachen},
  pages     = {3 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10962,
  title     = {Ordnung zur Aufhebung der Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Information Systems Engineering" vom 22. Januar 2010 (FH-Mitteilung Nr. 5/2010), zuletzt ge{\"a}ndert durch {\"A}nderungsordnung vom 4. Februar 2013 (FH-Mitteilung Nr. 6/2013) : vom 20. Dezember 2019},
  organization    = {FH Aachen},
  pages     = {3 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10956,
  title     = {Ordnung zur Aufhebung der Pr{\"u}fungsordnungen f{\"u}r den Masterstudiengang „Nuclear Applications" vom 13. Februar 2004 (FH-Mitteilung Nr. 5/2004) und vom 25. Februar 2010 (FH-Mitteilung Nr. 15/2010) in den Fassungen der Bekanntmachung der {\"A}nderungsordnungen vom 6. November 2012 (FH-Mitteilung Nr. 120/2012), 18. Juni 2014 (FH- Mitteilung Nr. 72/2014) und vom 15. Juni 2015 (FH-Mitteilung Nr. 28/2015) : vom 29. November 2019},
  organization    = {FH Aachen},
  pages     = {3 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10877,
  title     = {Ordnung zur Aufhebung der Studien- und Pr{\"u}fungsordnung f{\"u}r den Bachelorstudiengang „Holzingenieurwesen" (7-semestrig) vom 16. Juli 2012 (FH-Mitteilung Nr. 66/2012) in der Fassung der Bekanntmachung der {\"A}nderungsordnungen vom 6. Juli 2016 (FH-Mitteilung Nr. 95/2016) und 16. August 2019 (FH-Mitteilung Nr. 76/2019) an der Fachhochschule Aachen : vom 24. Juli 2018 - FH-Mitteilung Nr. 120/2018 in der Fassung der Bekanntmachung der {\"A}nderungsordnung vom 16. August 2019 - FH-Mitteilung Nr. 77/2019 (Nichtamtliche lesbare Fassung)},
  organization    = {FH Aachen},
  pages     = {3 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10883,
  title     = {Ordnung zur Aufhebung der Studien- und Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Bauingenieurwesen" vom 10. Dezember 2012 (FH-Mitteilung Nr. 129/2012) in der Fassung der Bekanntmachung der {\"A}nderungsordnung vom 30. Mai 2017 (FH-Mitteilung Nr. 58/2017) und 16. August 2019 (FH-Mitteilung Nr. 80/2019) an der Fachhochschule Aachen : vom 24. Juli 2018 - FH-Mitteilung Nr. 121/2018 in der Fassung der Bekanntmachung der {\"A}nderungsordnung vom 16. August 2019 - FH-Mitteilung Nr. 81/2019 (Nichtamtliche lesbare Fassung)},
  organization    = {FH Aachen},
  pages     = {3 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10899,
  title     = {Ordnung zur Aufhebung der Studien- und Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Facility Management" vom 29. November 2012 (FH-Mitteilung Nr. 127/2012) in der Fassung der Bekanntmachung der {\"A}nderungsordnungen vom 3. Februar 2016 (FH-Mitteilung Nr. 10/2016) und 16. August 2019 (FH-Mitteilung Nr. 82/2019) an der Fachhochschule Aachen : vom 24. Juli 2018 - FH-Mitteilung Nr. 122/2018 in der Fassung der Bekanntmachung der {\"A}nderungsordnung vom 16. August 2019 - FH-Mitteilung Nr. 83/2019 (Nichtamtliche lesbare Fassung)},
  organization    = {FH Aachen},
  pages     = {3 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10875,
  title     = {Ordnung zur Aufhebung der Studien- und Pr{\"u}fungsordnung f{\"u}r die Bachelorstudieng{\"a}nge „Bauingenieurwesen" (7-semestrig), „Bauingenieurwesen mit Praxissemester" (8-semestrig) und „Bauingenieurwesen mit Auslandssemester" (8-semestrig) vom 1. September 2011 (FH-Mitteilung Nr. 76/2011) in der Fassung der Bekanntmachung der {\"A}nderungsordnungen vom 22. August 2013 (FH-Mitteilung Nr. 88/2013), 8. Juni 2016 (FH-Mitteilung Nr. 80/2016) und 16. August 2019 (FH-Mitteilung Nr. 74/2019) an der Fachhochschule Aachen : vom 24. Juli 2018 - FH-Mitteilung Nr. 119/2018 in der Fassung der Bekanntmachung der {\"A}nderungsordnung vom 16. August 2019 - FH-Mitteilung Nr. 75/2019 (Nichtamtliche lesbare Fassung)},
  organization    = {FH Aachen},
  pages     = {3 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10881,
  title     = {Ordnung zur Regelung der Einstellung des Bachelorstudiengangs Bauingenieurwesen - Netzingenieur (7-semestrig) und des dualen Bachelorstudiengangs Bauingenieurwesen - Netzingenieur (9-semestrig) im Fachbereich Bauingeieurwesen an der Fachhochschule Aachen : vom 24. Juli 2018 - FH-Mitteilung Nr. 123/2018 in der Fassung der Bekanntmachung der {\"A}nderungsordnung vom 16. August 2019 - FH-Mitteilung Nr. 79/2019 (Nichtamtliche lesbare Fassung)},
  organization    = {FH Aachen},
  pages     = {4 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10902,
  title     = {Ordnung zur {\"A}nderung der Gesamtpr{\"u}fungsordnung f{\"u}r den Bachelorstudiengang „Elektrotechnik mit Orientierungssemester" an der Fachhochschule Aachen und der RWTH Aachen : vom 10. Oktober 2019},
  organization    = {FH Aachen},
  pages     = {4 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10858,
  title     = {Ordnung zur {\"A}nderung der Ordnung zur Aufhebung der Studien- und Pr{\"u}fungsordnung f{\"u}r den Bachelorstudiengang „Holzingenieurwesen" (7-semestrig) vom 16. Juli 2012 (FH-Mitteilung Nr. 66/2012) in der Fassung der Bekanntmachung der {\"A}nderungsordnung vom 6. Juli 2016 (FH-Mitteilung Nr. 95/2016) an der Fachhochschule Aachen},
  organization    = {FH Aachen},
  pages     = {2 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10862,
  title     = {Ordnung zur {\"A}nderung der Ordnung zur Aufhebung der Studien- und Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Bauingenieurwesen" vom 10. Dezember 2012 (FH-Mitteilung Nr. 129/2012) in der Fassung der Bekanntmachung der {\"A}nderungsordnungen vom 30. Mai 2017 (FH-Mitteilung Nr. 58/2017) an der Fachhochschule Aachen},
  organization    = {FH Aachen},
  pages     = {2 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10864,
  title     = {Ordnung zur {\"A}nderung der Ordnung zur Aufhebung der Studien- und Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Facility Management" vom 29. November 2012 (FH-Mitteilung Nr. 127/2012) in der Fassung der Bekanntmachung der {\"A}nderungsordnungen vom 3. Februar 2016 (FH-Mitteilung Nr. 10/2016) an der Fachhochschule Aachen},
  organization    = {FH Aachen},
  pages     = {2 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10855,
  title     = {Ordnung zur {\"A}nderung der Ordnung zur Aufhebung der Studien- und Pr{\"u}fungsordnung f{\"u}r die Bachelorstudieng{\"a}nge „Bauingenieurwesen" (7-semestrig), „Bauingenieurwesen mit Praxissemester" (8-semestrig) und „Bauingenieurwesen mit Auslandssemester" (8-semestrig) vom 1. September 2011 (FH-Mitteilung Nr. 76/2011) in der Fassung der Bekanntmachung der {\"A}nderungsordnungen vom 22. August 2013 (FH- Mitteilung Nr. 88/2013) und vom 8. Juni 2016 (FH-Mitteilung Nr. 80/2016) an der Fachhochschule Aachen},
  organization    = {FH Aachen},
  pages     = {2 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10857,
  title     = {Ordnung zur {\"A}nderung der Ordnung zur Aufhebung der Studien- und Pr{\"u}fungsordnung f{\"u}r die Bachelorstudieng{\"a}nge „Bauingenieurwesen" (7-semestrig), „Bauingenieurwesen mit Praxissemester" (8-semestrig) und „Bauingenieurwesen mit Auslandssemester" (8-semestrig) vom 1. September 2011 (FH-Mitteilung Nr. 76/2011) in der Fassung der Bekanntmachung der {\"A}nderungsordnungen vom 22. August 2013 (FH- Mitteilung Nr. 88/2013) und vom 8. Juni 2016 (FH-Mitteilung Nr. 80/2016) an der Fachhochschule Aachen},
  organization    = {FH Aachen},
  pages     = {2 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10860,
  title     = {Ordnung zur {\"A}nderung der Ordnung zur Regelung der Einstellung des Bachelorstudiengangs Bauingenieurwesen - Netzingenieur (7-semestrig) und des dualen Bachelorstudiengangs Bauingenieurwesen - Netzingenieur (9-semestrig) im Fachbereich Bauingeieurwesen an der Fachhochschule Aachen},
  organization    = {FH Aachen},
  pages     = {2 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10808,
  title     = {Ordnung zur {\"A}nderung der Pr{\"u}fungsordnung f{\"u}r den Bachelorstudiengang Architektur im Fachbereich Architektur an der Fachhochschule Aachen},
  address   = {Aachen},
  organization    = {FH Aachen},
  pages     = {4 Seiten},
  year      = {2019},
  abstract  = {Aufgrund des \S 2 Absatz 4 Satz 1 in Verbindung mit \S 64 des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16. September 2014 (GV. NRW. S. 547), zuletzt ge{\"a}ndert durch Artikel 3 des Gesetzes vom 17. Oktober 2017 (GV. NRW. S. 806), und der Rahmenpr{\"u}fungsordnung (RPO) f{\"u}r die Bachelor- und Masterstudieng{\"a}nge an der Fachhochschule Aachen vom 1. Februar 2018 (FH-Mitteilung Nr. 3/2018) hat der Fachbereich Architektur folgende {\"A}nderung der Pr{\"u}fungsordnung vom 5. Juli 2018 (FH-Mitteilung Nr. 104/2018) erlassen.},
  language  = {de}
}
@misc{OPUS4-10947,
  title     = {Ordnung zur {\"A}nderung der Pr{\"u}fungsordnung f{\"u}r den Bachelorstudiengang Holzingenieurwesen im Fachbereich Bauingenieurwesen an der Fachhochschule Aachen : vom 8. November 2019},
  organization    = {FH Aachen},
  pages     = {8 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10823,
  title     = {Ordnung zur {\"A}nderung der Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang Architektur im Fachbereich Architektur an der Fachhochschule Aachen},
  organization    = {FH Aachen},
  pages     = {4 Seiten},
  year      = {2019},
  abstract  = {Aufgrund des \S 2 Absatz 4 Satz 1 in Verbindung mit \S 64 des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16. September 2014 (GV. NRW. S. 547), zuletzt ge{\"a}ndert durch Artikel 3 des Gesetzes vom 17. Oktober 2017 (GV. NRW. S. 806), und der Rahmenpr{\"u}fungsordnung (RPO) f{\"u}r die Bachelor- und Masterstudieng{\"a}nge an der Fachhochschule Aachen vom 1. Februar 2018 (FH-Mitteilung Nr. 3/2018) hat der Fachbereich Architektur folgende {\"A}nderung der Pr{\"u}fungsordnung vom 5. Juli 2018 (FH-Mitteilung Nr. 105/2018) erlassen.},
  language  = {de}
}
@misc{OPUS4-10945,
  title     = {Ordnung zur {\"A}nderung der Pr{\"u}fungsordnung f{\"u}r die Bachelorstudieng{\"a}nge Bauingenieurwesen, Bauingenieurwesen mit Praxissemester, Bauingenieurwesen mit Auslandssemester, Bauingenieurwesen Double Degree (NUST) und Bauingenieurwesen Dual an der Fachhochschule Aachen : vom 8. November 2019},
  organization    = {FH Aachen},
  pages     = {6 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10850,
  title     = {Ordnung zur {\"A}nderung der Pr{\"u}fungsordnung f{\"u}r die Bachelorstudieng{\"a}nge „Schienenfahrzeugtechnik" „Schienenfahrzeugtechnik (Teilzeit)" und „Dualer Studiengang Schienenfahrzeugtechnik (DIRail)" im Fachbereich Maschinenbau und Mechatronik an der Fachhochschule Aachen},
  organization    = {FH Aachen},
  pages     = {2},
  year      = {2019},
  language  = {de}
}
@misc{ReiswichBrandtCzupalla2019,
  author    = {Reiswich, Martin and Brandt, Hannes and Czupalla, Markus},
  title     = {Passive thermal control by integration of phase change material into additively manufactured structures},
  series = {E2. 47th Student conference},
  journal   = {E2. 47th Student conference},
  year      = {2019},
  abstract  = {Optical Instruments require an extremely stable thermal surrounding to prevent loss of data quality by misalignments of the instrument components resulting from material deformation due to temperature f luctuations (e.g. from solar intrusion). Phase Change Material (PCM) can be applied as a thermal damper to achieve a more uniform temperature distribution. The challenge of this method is, among others, the integration of PCM into affected areas. If correctly designed, incoming heat is latently absorbed during phase change of the PCM, i.e. the temperature of a structure remains almost constant. In a cold phase, the heat during phase change is released again latently until the PCM returns to its original state of aggregation. Thus, the structure is thermally stabilized. At FH Aachen- University of Applied Sciences research is conducted to apply PCM directly into the structures of affected components (baffles, optical benches, electronic boxes, etc.). Through the application of Additive Manufacturing, the necessary voids are directly printed into these structures and filled later with PCM. Additive Manufacturing enables complex structures that would not have been possible with conservative manufacturing methods. A corresponding Breadboard was developed and manufactured by Selective Laser Melting (SLM). The current state of research includes the handling and analysis of the Breadboard, tests and a correlation of the thermal model. The results have shown analytically and practically that it is possible to use PCM as an integral part of the structure as a thermal damper. The results serve as a basis for the further development of the technology, which should maximize performance and enable the integration of PCM into much more complex structures.},
  language  = {en}
}
@incollection{FinkenbergerHerbertMalornyetal.2019,
  author    = {Finkenberger, Isabel Maria and Herbert, Saskia and Malorny, Thomas and Koch, Christian},
  title     = {Perforierte Wirklichkeit und m{\"o}gliche Zuk{\"u}nfte : ein Gespr{\"a}ch},
  series = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  booktitle = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-578-9},
  pages     = {108 -- 129},
  year      = {2019},
  language  = {de}
}
@article{RegerKuhnhenneHachuletal.2019,
  author    = {Reger, Vitali and Kuhnhenne, Markus and Hachul, Helmut and D{\"o}ring, Bernd and Blanke, Tobias and G{\"o}ttsche, Joachim},
  title     = {Plusenergiegeb{\"a}ude 2.0 in Stahlleichtbauweise},
  series = {Stahlbau},
  volume    = {88},
  journal   = {Stahlbau},
  number    = {6},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-journal), 0038-9145 (print)},
  doi       = {10.1002/stab.201900034},
  pages     = {522 -- 528},
  year      = {2019},
  language  = {de}
}
@article{JayaramanMummidisettyLoeschetal.2019,
  author    = {Jayaraman, Chandrasekaran and Mummidisetty, Chaitanya Krishna and Loesch, Alexandra and Kaur, Sandi and Hoppe-Ludwig, Shenan and Staat, Manfred and Jayaraman, Arun},
  title     = {Postural and metabolic benefits of using a forearm support walker in older adults with impairments},
  series = {Archives of Physical Medicine and Rehabilitation},
  volume    = {Volume 100},
  journal   = {Archives of Physical Medicine and Rehabilitation},
  number    = {Issue 4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0003-9993},
  doi       = {10.1016/j.apmr.2018.10.001},
  pages     = {638 -- 647},
  year      = {2019},
  language  = {en}
}
@book{BuchholtzBarnatBosseetal.2019,
  author    = {Buchholtz, Nils and Barnat, Miriam and Bosse, Elke and Heemsoth, Tim and Vorh{\"o}lter, Katrin and Wibowo, Jonas},
  title     = {Praxistransfer in der terti{\"a}ren Bildungsforschung: Modelle, Gelingensbedingungen und Nachhaltigkeit},
  publisher = {Hamburg University Press},
  address   = {Hamburg},
  isbn      = {978-3-943423-72-3},
  pages     = {232 Seiten},
  year      = {2019},
  language  = {de}
}
@article{EngelmannShashaTeemanetal.2019,
  author    = {Engelmann, Ulrich M. and Shasha, Carolyn and Teeman, Eric and Slabu, Iona and Krishnan, Kannan M.},
  title     = {Predicting size-dependent heating efficiency of magnetic nanoparticles from experiment and stochastic N{\´e}el-Brown Langevin simulation},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {471},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2018.09.041},
  pages     = {450 -- 456},
  year      = {2019},
  language  = {en}
}
@article{KoppSchmeetsGosauetal.2019,
  author    = {Kopp, Alexander and Schmeets, Ralf and Gosau, Martin and Friedrich, Reinhard E. and Fuest, Sandra and Behbahani, Mehdi and Barbeck, Mike and Rutkowski, Rico and Burg, Simon and Kluwe, Lan and Henningsen, Anders},
  title     = {Production and Characterization of Porous Fibroin Scaffolds for Regenerative Medical Application},
  series = {In Vivo},
  volume    = {33},
  journal   = {In Vivo},
  number    = {3},
  issn      = {1791-7549},
  doi       = {10.21873/invivo.11536},
  pages     = {757 -- 762},
  year      = {2019},
  language  = {en}
}
@book{GebhardtKesslerSchwarz2019,
  author    = {Gebhardt, Andreas and Kessler, Julia and Schwarz, Alexander},
  title     = {Produktgestaltung f{\"u}r die additive Fertigung},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-45285-5},
  pages     = {XVI, 266 Seiten : Illustrationen, Diagramme},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10825,
  title     = {Pr{\"u}fungsordnung f{\"u}r den Bachelorstudiengang Architektur im Fachbereich Architektur an der Fachhochschule Aachen},
  organization    = {FH Aachen},
  pages     = {9 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10931,
  title     = {Pr{\"u}fungsordnung f{\"u}r den dreisemestrigen Masterstudiengang „Industrial Engineering" an der Fachhochschule Aachen : vom 11. Dezember 2014 - FH-Mitteilung Nr. 154/2014 in der Fassung der Bekanntmachung der {\"A}nderungsordnung vom 5. Februar 2019 - FH-Mitteilung Nr. 5/2019 (Nichtamtliche lesbare Fassung | Studienbeginn ab SS 2016)},
  organization    = {FH Aachen},
  pages     = {5 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10932,
  title     = {Pr{\"u}fungsordnung f{\"u}r den dreisemestrigen Masterstudiengang „Industrial Engineering" an der Fachhochschule Aachen : vom 11. Dezember 2014 - FH-Mitteilung Nr. 154/2014 in der Fassung der Bekanntmachung der {\"A}nderungsordnung vom 5. Februar 2019 - FH-Mitteilung Nr. 5/2019 (Nichtamtliche lesbare Fassung | Studienbeginn ab WS 2017/18)},
  organization    = {FH Aachen},
  pages     = {7 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10853,
  title     = {Pr{\"u}fungsordnung f{\"u}r den dualen ausbildungsintegrierenden Bachelorstudiengang „Physiotherapie" und den berufsbegleitenden Bachelorstudiengang „Physiotherapie" an der Fachhochschule Aachen in Kooperation mit der Medizinischen Fakult{\"a}t der Rheinisch-Westf{\"a}lisch Technischen Hochschule Aachen und der Physiotherapieschule des Universit{\"a}tsklinikums Aachen (UK Aachen)},
  organization    = {FH Aachen},
  pages     = {9 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10848,
  title     = {Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang Architektur im Fachbereich Architektur an der Fachhochschule Aachen},
  organization    = {FH Aachen},
  pages     = {5 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10961,
  title     = {Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang Nuclear Applications im Fachbereich Chemie und Biotechnologie an der Fachhochschule Aachen : vom 17. Dezember 2019},
  organization    = {FH Aachen},
  pages     = {7 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10905,
  title     = {Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Wirtschaftsingenieurwesen" an der Fachhochschule Aachen : vom 11. Dezember 2014 - FH-Mitteilung Nr. 152/2014 in der Fassung der bekanntmachung der {\"A}nderungsordnung vom 14. Oktober 2019 - FH-Mitteilung Nr. 102/2019 (Nichtamtliche lesbare Fassung)},
  organization    = {FH Aachen},
  pages     = {6 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10933,
  title     = {Pr{\"u}fungsordnung f{\"u}r den viersemestrigen Masterstudiengang „Industrial Engineering" an der Fachhochschule Aachen : vom 11.Dezember 2014 - FH-Mitteilung Nr. 156/2014 in der Fassung der Bekanntmachung der {\"A}nderungsordnung vom 5. Februar 2019 - FH-Mitteilung Nr. 6/2019 (Nichtamtliche lesbare Fassung | Studienbeginn ab WS 2015/16)},
  organization    = {FH Aachen},
  pages     = {8 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10934,
  title     = {Pr{\"u}fungsordnung f{\"u}r den viersemestrigen Masterstudiengang „Industrial Engineering" an der Fachhochschule Aachen : vom 11.Dezember 2014 - FH-Mitteilung Nr. 156/2014 in der Fassung der Bekanntmachung der {\"A}nderungsordnung vom 5. Februar 2019 - FH-Mitteilung Nr. 6/2019 (Nichtamtliche lesbare Fassung | Studienbeginn ab WS 2017/18)},
  organization    = {FH Aachen},
  pages     = {9 Seiten},
  year      = {2019},
  language  = {de}
}