@article{Gebhardt1997,
  author    = {Gebhardt, Andreas},
  title     = {Lasereinsatz in der Fertigung der Fahrzeugindustrie. Grundlagen der Anwendung von Lasern zur Materialbearbeitung},
  pages     = {1 -- 154},
  year      = {1997},
  language  = {de}
}
@article{GebhardtPflug1995,
  author    = {Gebhardt, Andreas and Pflug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping. Teil I},
  series = {CAD-CAM Report. 14 (1995), H. 7},
  journal   = {CAD-CAM Report. 14 (1995), H. 7},
  isbn      = {0930-7117},
  pages     = {56 -- 65},
  year      = {1995},
  language  = {de}
}
@article{GebhardtPlug1995,
  author    = {Gebhardt, Andreas and Plug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping, Teil II},
  series = {CAD-CAM Report. 14 (1995), H. 9},
  journal   = {CAD-CAM Report. 14 (1995), H. 9},
  isbn      = {0930-7117},
  pages     = {78 -- 85},
  year      = {1995},
  language  = {de}
}
@article{CosmaKesslerGebhardtetal.2020,
  author    = {Cosma, Cosmin and Kessler, Julia and Gebhardt, Andreas and Campbell, Ian and Balc, Nicolae},
  title     = {Improving the Mechanical Strength of Dental Applications and Lattice Structures SLM Processed},
  series = {Materials},
  volume    = {13},
  journal   = {Materials},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1944},
  doi       = {10.3390/ma13040905},
  pages     = {1 -- 18},
  year      = {2020},
  abstract  = {To manufacture custom medical parts or scaffolds with reduced defects and high mechanical characteristics, new research on optimizing the selective laser melting (SLM) parameters are needed. In this work, a biocompatible powder, 316L stainless steel, is characterized to understand the particle size, distribution, shape and flowability. Examination revealed that the 316L particles are smooth, nearly spherical, their mean diameter is 39.09 μm and just 10\% of them hold a diameter less than 21.18 μm. SLM parameters under consideration include laser power up to 200 W, 250-1500 mm/s scanning speed, 80 μm hatch spacing, 35 μm layer thickness and a preheated platform. The effect of these on processability is evaluated. More than 100 samples are SLM-manufactured with different process parameters. The tensile results show that is possible to raise the ultimate tensile strength up to 840 MPa, adapting the SLM parameters for a stable processability, avoiding the technological defects caused by residual stress. Correlating with other recent studies on SLM technology, the tensile strength is 20\% improved. To validate the SLM parameters and conditions established, complex bioengineering applications such as dental bridges and macro-porous grafts are SLM-processed, demonstrating the potential to manufacture medical products with increased mechanical resistance made of 316L.},
  language  = {en}
}
@article{GebhardtHoetterZiebura2014,
  author    = {Gebhardt, Andreas and H{\"o}tter, Jan-Steffen and Ziebura, Dawid},
  title     = {Impact of SLM build parameters on the surface quality},
  series = {RTejournal - Forum f{\"u}r Rapid Technologien},
  volume    = {11 (2014)},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologien},
  number    = {1},
  issn      = {1614-0923},
  pages     = {1 -- 14},
  year      = {2014},
  language  = {de}
}
@article{Gebhardt1989,
  author    = {Gebhardt, Andreas},
  title     = {H{\"a}rten von Kurbelwellen},
  pages     = {1 -- 14},
  year      = {1989},
  language  = {de}
}
@article{Gebhardt2008,
  author    = {Gebhardt, Andreas},
  title     = {Hype um Generative Verfahren. Generative Verfahren zur Herstellung von Kleinserien durchlaufen die Phase eines Booms},
  series = {Economic Engineering (2008)},
  journal   = {Economic Engineering (2008)},
  isbn      = {1436-3348},
  pages     = {76 -- 79},
  year      = {2008},
  language  = {de}
}
@article{DuesGebhardtKallweitetal.1994,
  author    = {Dues, M. and Gebhardt, Andreas and Kallweit, Stephan and Scheffler, T. and Siekmann, H. and Uchiyama, T.},
  title     = {Flow Visualization in a Cavitating Flow},
  series = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  journal   = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  publisher = {Kernforschungszentrum Karlsruhe},
  address   = {Karlsruhe},
  pages     = {391 -- 402},
  year      = {1994},
  language  = {en}
}
@article{FateriGebhardtThuemmleretal.2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura},
  title     = {Experimental investigation on selective laser melting of glass},
  series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  volume    = {56 (2014)},
  journal   = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  doi       = {10.1016/j.phpro.2014.08.118},
  pages     = {357 -- 364},
  year      = {2014},
  language  = {en}
}
@article{FateriHoetterGebhardt2012,
  author    = {Fateri, Miranda and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas},
  title     = {Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting},
  series = {Physics Procedia},
  volume    = {39},
  journal   = {Physics Procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.062},
  pages     = {464 -- 470},
  year      = {2012},
  abstract  = {Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.},
  language  = {en}
}
@article{HoevelerJanserBindewaldetal.2015,
  author    = {Hoeveler, Bastian and Janser, Frank and Bindewald, Thorsten and Gebhardt, Andreas},
  title     = {Entwurf, Fertigung und Untersuchung eines Windkanalmodells eines innovativen, senkrechtstartenden Kleinflugzeuges},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {12},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-42921},
  pages     = {1 -- 5},
  year      = {2015},
  language  = {de}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Entwicklungstendenzen und neue Systeme im Rapid Prototyping},
  series = {Industrie Management. 17 (2001), H. 3},
  journal   = {Industrie Management. 17 (2001), H. 3},
  isbn      = {1434-1980},
  pages     = {42 -- 46},
  year      = {2001},
  language  = {de}
}
@article{GebhardtBackeskrameretal.1995,
  author    = {Gebhardt, Andreas and Backes, G. and kramer, T. and Kreutz, E.-W. (u.a.)},
  title     = {Beschichten von Kurbelzapfen mit CO2-Laserstrahlung. Energietechnik},
  series = {Maschinenmarkt. 101 (1995), H. 12},
  journal   = {Maschinenmarkt. 101 (1995), H. 12},
  isbn      = {0341-5775},
  pages     = {42 -- 45},
  year      = {1995},
  language  = {de}
}
@article{KesslerBalcGebhardtetal.2015,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim},
  title     = {Basic Research on Lattice Structures Focused on the Tensile Strength},
  series = {Applied Mechanics and Materials},
  volume    = {Vol. 808},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  issn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.808.193},
  pages     = {193 -- 198},
  year      = {2015},
  language  = {en}
}
@article{GebhardtMathar1994,
  author    = {Gebhardt, Andreas and Mathar, W.},
  title     = {Auftragsabwicklung und branchenspezifische Anforderungen an SFM-Modelle -am Beispiel medizinischer Modelle},
  pages     = {188 -- 191},
  year      = {1994},
  language  = {de}
}
@article{Gebhardt1997,
  author    = {Gebhardt, Andreas},
  title     = {Aktuelle Trends bei RP und RT},
  series = {Kunststoffe, M{\"u}nchen. 87 (1997), H. 1},
  journal   = {Kunststoffe, M{\"u}nchen. 87 (1997), H. 1},
  isbn      = {0023-5563},
  pages     = {27 -- 30},
  year      = {1997},
  language  = {de}
}
@article{GebhardtSchmidtHoetteretal.2010,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick},
  title     = {Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry},
  series = {Physics Procedia},
  volume    = {5},
  journal   = {Physics Procedia},
  number    = {2},
  isbn      = {1875-3892},
  pages     = {543 -- 549},
  year      = {2010},
  language  = {en}
}
@article{FateriGebhardt2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Additive manufactured mechanical disentanglement lock},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {12},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-42147},
  year      = {2015},
  language  = {en}
}
@article{GebhardtFateri2014,
  author    = {Gebhardt, Andreas and Fateri, Miranda},
  title     = {3D-Drucken und die Anwendungen},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {11 (2014)},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  issn      = {1614-0923},
  pages     = {1 -- 9},
  year      = {2014},
  language  = {de}
}
@article{Gebhardt2015,
  author    = {Gebhardt, Andreas},
  title     = {3D-Druck ist {\"u}berall. Modische Accessoires, Kleidung, Medikamente, Nahrungsmittel, Autos, H{\"a}user, Waffen, B{\"u}sten, Musikinstrumente - alles geht},
  series = {Kunststoffe},
  volume    = {105},
  journal   = {Kunststoffe},
  number    = {10},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  issn      = {0023-5563},
  pages     = {62 -- 70},
  year      = {2015},
  language  = {de}
}
@article{GebhardtFateri2013,
  author    = {Gebhardt, Andreas and Fateri, Miranda},
  title     = {3D printing and its applications},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {10},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-35626},
  year      = {2013},
  abstract  = {Eine zunehmende Anzahl von Artikeln in Publikumszeitschriften und Journalen r{\"u}ckt die direkte Herstellung von Bauteilen und Figuren immer mehr in das Bewusstsein einer breiten {\"O}ffentlichkeit. Leider ergibt sich nur selten ein einigermaßen vollst{\"a}ndiges Bild davon, wie und in welchen Lebensbereichen diese Techniken unseren Alltag ver{\"a}ndern werden. Das liegt auch daran, dass die meisten Artikel sehr technisch gepr{\"a}gt sind und sich nur punktuell auf Beispiele st{\"u}tzen. Dieser Beitrag geht von den Bed{\"u}rfnissen der Menschen aus, wie sie z.B. in der Maslow'schen Bed{\"u}rfnispyramide strukturiert dargestellt sind und unterstreicht dadurch, dass 3D Printing (oder Additive Manufacturing resp. Rapid Prototyping) bereits alle Lebensbereiche erfasst hat und im Begriff ist, viele davon zu revolutionieren.},
  language  = {en}
}