@article{NurispahicKotliarLanzl2008,
  author    = {Nurispahic, A. and Kotliar, Konstantin and Lanzl, I.},
  title     = {Messung der Akkommodation mittels optischer Biometrie},
  series = {Der Ophthalmologe},
  volume    = {105},
  journal   = {Der Ophthalmologe},
  number    = {4},
  publisher = {-},
  isbn      = {1433-0423},
  pages     = {369 -- 375},
  year      = {2008},
  language  = {de}
}
@article{HarishWriggersJungketal.2016,
  author    = {Harish, Ajay B. and Wriggers, Peter and Jungk, Juliane and Hojdis, Nils and Recker, Carla},
  title     = {Mesoscale Constitutive Modeling of Non-Crystallizing Filled Elastomers},
  series = {Computational Mechanics},
  volume    = {57},
  journal   = {Computational Mechanics},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-0924},
  doi       = {10.1007/s00466-015-1251-1},
  pages     = {653 -- 677},
  year      = {2016},
  abstract  = {Elastomers are exceptional materials owing to their ability to undergo large deformations before failure. However, due to their very low stiffness, they are not always suitable for industrial applications. Addition of filler particles provides reinforcing effects and thus enhances the material properties that render them more versatile for applications like tyres etc. However, deformation behavior of filled polymers is accompanied by several nonlinear effects like Mullins and Payne effect. To this day, the physical and chemical changes resulting in such nonlinear effect remain an active area of research. In this work, we develop a heterogeneous (or multiphase) constitutive model at the mesoscale explicitly considering filler particle aggregates, elastomeric matrix and their mechanical interaction through an approximate interface layer. The developed constitutive model is used to demonstrate cluster breakage, also, as one of the possible sources for Mullins effect observed in non-crystallizing filled elastomers.},
  language  = {en}
}
@article{TrappLammersEngudaretal.2023,
  author    = {Trapp, Svenja and Lammers, Tom and Engudar, Gokce and Hoehr, Cornelia and Denkova, Antonia G. and Paulßen, Elisabeth and de Kruijff, Robin M.},
  title     = {Membrane-based microfluidic solvent extraction of Ga-68 from aqueous Zn solutions: towards an automated cyclotron production loop},
  series = {EJNMMI Radiopharmacy and Chemistry},
  volume    = {2023},
  journal   = {EJNMMI Radiopharmacy and Chemistry},
  number    = {8, Article number: 9},
  publisher = {Springer Nature},
  issn      = {2365-421X},
  doi       = {10.1186/s41181-023-00195-2},
  pages     = {1 -- 14},
  year      = {2023},
  language  = {en}
}
@article{KernZischank1988,
  author    = {Kern, Alexander and Zischank, Wolfgang J.},
  title     = {Melting effects on metal sheets and air termination wires caused by direct lightning strikes},
  series = {Conference proceedings : Graz, {\"O}sterreich, 25. - 29. April 1988 / Gesamtorganisation: {\"O}sterr. Verb. f{\"u}r Elektrotechnik ({\"O}VE), Fachausschuß Blitzschutz ... [Red.: G. Diendorfer ...]},
  journal   = {Conference proceedings : Graz, {\"O}sterreich, 25. - 29. April 1988 / Gesamtorganisation: {\"O}sterr. Verb. f{\"u}r Elektrotechnik ({\"O}VE), Fachausschuß Blitzschutz ... [Red.: G. Diendorfer ...]},
  publisher = {Eigenverl. des {\"O}VE},
  address   = {Wien},
  isbn      = {3-85133-001-3},
  year      = {1988},
  language  = {en}
}
@article{NiemuellerKarrasFerrein2017,
  author    = {Niemueller, Tim and Karras, Ulrich and Ferrein, Alexander},
  title     = {Meisterschaft der Maschinen: Die Industrial Logistic Liga},
  series = {C´t Magazin f{\"u}r Computertechnik},
  journal   = {C´t Magazin f{\"u}r Computertechnik},
  number    = {26},
  year      = {2017},
  language  = {de}
}
@article{InagakiSleddensLinkelsWassenaaretal.2011,
  author    = {Inagaki, Akiko and Sleddens-Linkels, Esther and Wassenaar, Evelyne and Ooms, Marja and Cappellen, Wiggert A. van and Hoeijmakers, Jan H. J. and Seibler, Jost and Vogt, Thomas F. and Shin, Myung K. and Grootegoed, J. Anton and Baarends, Willy M.},
  title     = {Meiotic functions of RAD18},
  series = {Journal of Cell Science},
  volume    = {124},
  journal   = {Journal of Cell Science},
  number    = {16},
  publisher = {Company of Biologists Limited},
  address   = {Cambridge},
  issn      = {1477-9137},
  doi       = {10.1242/jcs.081968},
  pages     = {2837 -- 2850},
  year      = {2011},
  language  = {en}
}
@article{Mayer2008,
  author    = {Mayer, Claudia},
  title     = {Meine besten Rezepte},
  series = {Kinder, Karriere, Kochvergn{\"u}gen : Prominente Aachenerinnen verraten ihre besten Rezepte / Hrsg. von Claudia Dechamps . Fotos: Harald Kr{\"o}mer},
  journal   = {Kinder, Karriere, Kochvergn{\"u}gen : Prominente Aachenerinnen verraten ihre besten Rezepte / Hrsg. von Claudia Dechamps . Fotos: Harald Kr{\"o}mer},
  publisher = {Corporate Publishing Claudia Dechamps},
  address   = {Aachen},
  pages     = {30 -- 33},
  year      = {2008},
  language  = {de}
}
@article{Gossla1998,
  author    = {Gossla, Ulrich},
  title     = {Mein Keller aus Stahlfaserbeton? Zur statischen Anrechenbarkeit von Stahlfasern},
  series = {Beton auf neuen Wegen / Braunschweiger Bauseminar 1998, 12. und 13. November. Wiss. Leitung: Horst Falkner ...},
  journal   = {Beton auf neuen Wegen / Braunschweiger Bauseminar 1998, 12. und 13. November. Wiss. Leitung: Horst Falkner ...},
  publisher = {IBMB},
  address   = {Braunschweig},
  isbn      = {3-89288-120-0},
  pages     = {83 -- 98},
  year      = {1998},
  language  = {de}
}
@article{Mohr2004,
  author    = {Mohr, Klaus},
  title     = {Mein Gott bist du gut},
  series = {Boxhorn. 11 (2004), H. Inflation},
  journal   = {Boxhorn. 11 (2004), H. Inflation},
  pages     = {24 -- 25},
  year      = {2004},
  language  = {de}
}
@article{WolfBiesenGreeb2014,
  author    = {Wolf, Martin R. and Biesen, Ina van der and Greeb, Birgit},
  title     = {Mein Freund, die Uni},
  series = {Die neue Hochschule : DNH : f{\"u}r anwendungsbezogene Wissenschaft und Kunst},
  volume    = {2014},
  journal   = {Die neue Hochschule : DNH : f{\"u}r anwendungsbezogene Wissenschaft und Kunst},
  number    = {2},
  publisher = {HLB},
  address   = {Bonn},
  issn      = {0340-448X},
  pages     = {54 -- 56},
  year      = {2014},
  language  = {de}
}
@article{MeskourisButenwegRenault2006,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Renault, Philippe},
  title     = {Mehrstufen-Konzept f{\"u}r mehr Erdbebensicherheit : ein Werkzeug f{\"u}r die Beurteilung der Erdbebengef{\"a}hrdung von Ingenieurbauwerken},
  series = {Deutsches Ingenieurblatt},
  volume    = {Band 13},
  journal   = {Deutsches Ingenieurblatt},
  number    = {Heft 6},
  issn      = {0946-2422},
  pages     = {18 -- 26},
  year      = {2006},
  language  = {de}
}
@article{EnningPischingerRakeetal.2000,
  author    = {Enning, Manfred and Pischinger, S. and Rake, H. and Kr{\"u}ger, M.},
  title     = {Mehrgr{\"o}ßenregelung beim direkt einspritzenden Pkw-Dieselmotor / Pischinger, S. ; Rake, H. ; Kr{\"u}ger, M. ; Enning, M. ; Fieweger, K. ; Kinoo, B. ; Schloßer, A.},
  series = {Dieselmotorentechnik 2000 : aktueller Stand und Entwicklungstendenzen ; mit 17 Tabellen und 106 Literaturstellen / Michael Bargende. Ulf Essers (Hrsg.)},
  journal   = {Dieselmotorentechnik 2000 : aktueller Stand und Entwicklungstendenzen ; mit 17 Tabellen und 106 Literaturstellen / Michael Bargende. Ulf Essers (Hrsg.)},
  publisher = {Expert-Verl.},
  address   = {Renningen-Malmsheim},
  isbn      = {3-8169-1829-8},
  pages     = {198 -- 217},
  year      = {2000},
  language  = {de}
}
@article{FinkenbergerSchlaich2014,
  author    = {Finkenberger, Isabel Maria and Schlaich, Christoph},
  title     = {Mehr als Wohnen. Vom Zusammenleben in integrierten Nachbarschaften},
  series = {APuZ - Aus Politik und Zeitgeschichte},
  volume    = {2014},
  journal   = {APuZ - Aus Politik und Zeitgeschichte},
  number    = {20-21},
  publisher = {Bundeszentrale f{\"u}r politische Bildung - bpb},
  address   = {Bonn},
  issn      = {2194-3621},
  pages     = {46 -- 52},
  year      = {2014},
  abstract  = {Neue D{\"o}rfer braucht das Land! D{\"o}rfer in der Stadt und D{\"o}rfer auf dem Land (…). Die Planung und Gestaltung nachhaltiger Raumsysteme, die durch ein neues Verst{\"a}ndnis des gemeinschaftlichen Besitzes (und dessen Nutzung) ressourcenfressende Individualisierungstendenzen unserer Gesellschaft {\"u}berwinden, aber zugleich gr{\"o}ßtm{\"o}glichen Freiraum f{\"u}r eine individuelle Pers{\"o}nlichkeitsentfaltung zur Verf{\"u}gung stellen." Dieses Zitat der Hamburger Initiative "Wir sind Dorf" beschreibt eine aktuelle Diskussion in unserer Gesellschaft, die sowohl in der Forschung und forschungsgeleiteten Initiativen, in Politik und Planung als auch in der B{\"u}rger-schaft stattfindet. Sie wird nicht nur auf wissenschaftlichen Veranstaltungen gef{\"u}hrt, sondern auch in konkreten Projekten f{\"u}r integrative Lebenswelten, die Fragestellungen von Ern{\"a}hrung und Energieversorgung, von Arbeit und {\"O}konomie, aber auch eines neuen r{\"a}umlichen und sozialen Miteinanders einbeziehen. Anders als bei den weit verbreiteten Baugruppen geht es nicht ausschließlich um die Schaffung von Wohnraum. Die Nachbarschaftsidee verbindet das Bed{\"u}rfnis nach gemeinschaftlichem Wohnen und Wirtschaften mit einer neuen Werteorientierung, die auf pers{\"o}nlicher Verantwortungs{\"u}bernahme beruht.},
  language  = {de}
}
@article{MartinGonzalezKotliarRiosMartinezetal.2014,
  author    = {Martin-Gonzalez, Anabel and Kotliar, Konstantin and Rios-Martinez, Jorge and Lanzl, Ines and Navab, Nassir},
  title     = {Mediated-reality magnification for macular degeneration rehabilitation},
  series = {Journal of Modern Optics},
  volume    = {61},
  journal   = {Journal of Modern Optics},
  number    = {17},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1362-3044},
  doi       = {10.1080/09500340.2014.936110},
  pages     = {1400 -- 1408},
  year      = {2014},
  language  = {en}
}
@article{WerkhausenWillwacherAlbracht2021,
  author    = {Werkhausen, Amelie and Willwacher, Steffen and Albracht, Kirsten},
  title     = {Medial gastrocnemius muscle fascicles shorten throughout stance during sprint acceleration},
  series = {Scandinavian Journal of Medicine \& Science in Sports},
  volume    = {31},
  journal   = {Scandinavian Journal of Medicine \& Science in Sports},
  number    = {7},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {0905-7188 (Druckausgabe)},
  doi       = {10.1111/sms.13956},
  pages     = {1471 -- 1480},
  year      = {2021},
  abstract  = {The compliant nature of distal limb muscle-tendon units is traditionally considered suboptimal in explosive movements when positive joint work is required. However, during accelerative running, ankle joint net mechanical work is positive. Therefore, this study aims to investigate how plantar flexor muscle-tendon behavior is modulated during fast accelerations. Eleven female sprinters performed maximum sprint accelerations from starting blocks, while gastrocnemius muscle fascicle lengths were estimated using ultrasonography. We combined motion analysis and ground reaction force measurements to assess lower limb joint kinematics and kinetics, and to estimate gastrocnemius muscle-tendon unit length during the first two acceleration steps. Outcome variables were resampled to the stance phase and averaged across three to five trials. Relevant scalars were extracted and analyzed using one-sample and two-sample t-tests, and vector trajectories were compared using statistical parametric mapping. We found that an uncoupling of muscle fascicle behavior from muscle-tendon unit behavior is effectively used to produce net positive mechanical work at the joint during maximum sprint acceleration. Muscle fascicles shortened throughout the first and second steps, while shortening occurred earlier during the first step, where negative joint work was lower compared with the second step. Elastic strain energy may be stored during dorsiflexion after touchdown since fascicles did not lengthen at the same time to dissipate energy. Thus, net positive work generation is accommodated by the reuse of elastic strain energy along with positive gastrocnemius fascicle work. Our results show a mechanism of how muscles with high in-series compliance can contribute to net positive joint work.},
  language  = {en}
}
@article{HartungKampmann2007,
  author    = {Hartung, Frank and Kampmann, Markus},
  title     = {Media Delivery Based on Service Aware Transport Overlay Networks / Kampmann, Markus ; Hartung, Frank},
  series = {KIVS 2007 : Kommunikation in verteilten Systemen : 15. ITG-GI-Fachtagung vom 26. Februar bis 2. M{\"a}rz 2007 in Bern, Schweiz ; Industriebeitr{\"a}ge, Kurzbeitr{\"a}ge und Workshops / T. Braun ... (Hrsg.)},
  journal   = {KIVS 2007 : Kommunikation in verteilten Systemen : 15. ITG-GI-Fachtagung vom 26. Februar bis 2. M{\"a}rz 2007 in Bern, Schweiz ; Industriebeitr{\"a}ge, Kurzbeitr{\"a}ge und Workshops / T. Braun ... (Hrsg.)},
  isbn      = {978-3-8007-2980-7},
  pages     = {9 -- 10},
  year      = {2007},
  language  = {en}
}
@article{HartungReyMathieuetal.2004,
  author    = {Hartung, Frank and Rey, J. and Mathieu, B. and Lozano, D.},
  title     = {Media aware overlay routing in Ambient Networks / Rey, J. ; Mathieu, B. ; Lozano, D. ; Herborn, S. ; Ahmed, K. ; Schmid, S. ; Goebbels, S. ; Hartung, F. ; Kampmann, M.},
  series = {16th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, 2005. PIMRC 2005. Date:11-14 Sept. 2005 ; Vol. 2},
  journal   = {16th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, 2005. PIMRC 2005. Date:11-14 Sept. 2005 ; Vol. 2},
  pages     = {952 -- 957},
  year      = {2004},
  language  = {en}
}
@article{SchmitzPischinger1997,
  author    = {Schmitz, G{\"u}nter and Pischinger, M.},
  title     = {Mechatronische Simulation eines EMV- Aktuators},
  series = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Paderborner Workshop TransMechatronik, 24. Juni 1997, Heinz-Nixdorf-MuseumsForum. [Hrsg. J{\"u}rgen Gausemeier]},
  journal   = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Paderborner Workshop TransMechatronik, 24. Juni 1997, Heinz-Nixdorf-MuseumsForum. [Hrsg. J{\"u}rgen Gausemeier]},
  publisher = {Heinz-Nixdorf-Inst., Univ.-GH Paderborn},
  address   = {Paderborn},
  isbn      = {3-931466-22-1},
  pages     = {69 -- 83},
  year      = {1997},
  language  = {de}
}
@article{Starke2002,
  author    = {Starke, G{\"u}nther},
  title     = {Mechatronik und Robotik in der Fertigung - Entwicklung eines integrierten Fertigungskonzepts zur automatisierten Regenerierung von Umformwerkzeugen},
  series = {Advanced driving systems : Tagungsband / ISOM Chemnitz 2002, Chemnitz, Germany, March 21 - 22, 2002. Ed. by Peter Maisser},
  journal   = {Advanced driving systems : Tagungsband / ISOM Chemnitz 2002, Chemnitz, Germany, March 21 - 22, 2002. Ed. by Peter Maisser},
  publisher = {Inst. f{\"u}r Mechatronik},
  address   = {Chemnitz},
  isbn      = {3-00-007504-6},
  pages     = {193 -- 203},
  year      = {2002},
  language  = {de}
}
@article{EnningJenayehMuelleretal.1998,
  author    = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Kositza, N.},
  title     = {Mechatronics in automating shunting processes in marshalling yards / Jenayeh, I. ; M{\"u}ller, C.; Kositza, N. ; Enning, M. ; Rake, H.},
  series = {Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Sk{\"o}vde, Sweden, 9-11 September 1998},
  journal   = {Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Sk{\"o}vde, Sweden, 9-11 September 1998},
  publisher = {Pergamon},
  address   = {Amsterdam},
  isbn      = {0-08-043339-1},
  pages     = {xxi, 918 S. : graph. Darst.},
  year      = {1998},
  language  = {en}
}
@article{Schmitz2004,
  author    = {Schmitz, G{\"u}nter},
  title     = {Mechatronic Systems Simulation as an obligatory module for Mechatronic Master Students},
  series = {Mechatronics \& Robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE Industrial Electronics Society ...] P. Drews (ed.)},
  journal   = {Mechatronics \& Robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE Industrial Electronics Society ...] P. Drews (ed.)},
  publisher = {Eysoldt},
  address   = {Aachen},
  isbn      = {3-938153-50-X},
  pages     = {1278},
  year      = {2004},
  language  = {en}
}
@article{BeckerWallangArtmannetal.2008,
  author    = {Becker, C. and Wallang, C. and Artmann, Gerhard and Jakse, G.},
  title     = {Mechanotransduction-bioreactor for tissue engineering of a ureter prosthesis},
  series = {International Journal of Artificial Organs, The},
  volume    = {31},
  journal   = {International Journal of Artificial Organs, The},
  number    = {7},
  issn      = {0391-3988},
  pages     = {583 -- 583},
  year      = {2008},
  language  = {en}
}
@article{BayerTemizArtmannDigeletal.2020,
  author    = {Bayer, Robin and Temiz Artmann, Ayseg{\"u}l and Digel, Ilya and Falkenstein, Julia and Artmann, Gerhard and Creutz, Till and Hescheler, J{\"u}rgen},
  title     = {Mechano-pharmacological testing of L-Type Ca²⁺ channel modulators via human vascular celldrum model},
  series = {Cellular Physiology and Biochemistry},
  volume    = {54},
  journal   = {Cellular Physiology and Biochemistry},
  publisher = {Cell Physiol Biochem Press},
  address   = {D{\"u}sseldorf},
  issn      = {1421-9778},
  doi       = {10.33594/000000225},
  pages     = {371 -- 383},
  year      = {2020},
  abstract  = {Background/Aims: This study aimed to establish a precise and well-defined working model, assessing pharmaceutical effects on vascular smooth muscle cell monolayer in-vitro. It describes various analysis techniques to determine the most suitable to measure the biomechanical impact of vasoactive agents by using CellDrum technology. Methods: The so-called CellDrum technology was applied to analyse the biomechanical properties of confluent human aorta muscle cells (haSMC) in monolayer. The cell generated tensions deviations in the range of a few N/m² are evaluated by the CellDrum technology. This study focuses on the dilative and contractive effects of L-type Ca²⁺ channel agonists and antagonists, respectively. We analyzed the effects of Bay K8644, nifedipine and verapamil. Three different measurement modes were developed and applied to determine the most appropriate analysis technique for the study purpose. These three operation modes are called, particular time mode" (PTM), "long term mode" (LTM) and "real-time mode" (RTM). Results: It was possible to quantify the biomechanical response of haSMCs to the addition of vasoactive agents using CellDrum technology. Due to the supplementation of 100nM Bay K8644, the tension increased approximately 10.6\% from initial tension maximum, whereas, the treatment with nifedipine and verapamil caused a significant decrease in cellular tension: 10nM nifedipine decreased the biomechanical stress around 6,5\% and 50nM verapamil by 2,8\%, compared to the initial tension maximum. Additionally, all tested measurement modes provide similar results while focusing on different analysis parameters. Conclusion: The CellDrum technology allows highly sensitive biomechanical stress measurements of cultured haSMC monolayers. The mechanical stress responses evoked by the application of vasoactive calcium channel modulators were quantified functionally (N/m²). All tested operation modes resulted in equal findings, whereas each mode features operation-related data analysis.},
  language  = {en}
}
@article{GossmannFrotscherLinderetal.2016,
  author    = {Goßmann, Matthias and Frotscher, Ralf and Linder, Peter and Bayer, Robin and Epple, U. and Staat, Manfred and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard},
  title     = {Mechano-pharmacological characterization of cardiomyocytes derived from human induced pluripotent stem cells},
  series = {Cellular physiology and biochemistry},
  volume    = {38},
  journal   = {Cellular physiology and biochemistry},
  number    = {3},
  publisher = {Karger},
  address   = {Basel},
  issn      = {1421-9778 (Online)},
  doi       = {10.1159/000443124},
  pages     = {1182 -- 1198},
  year      = {2016},
  abstract  = {Background/Aims: Common systems for the quantification of cellular contraction rely on animal-based models, complex experimental setups or indirect approaches. The herein presented CellDrum technology for testing mechanical tension of cellular monolayers and thin tissue constructs has the potential to scale-up mechanical testing towards medium-throughput analyses. Using hiPS-Cardiac Myocytes (hiPS-CMs) it represents a new perspective of drug testing and brings us closer to personalized drug medication. Methods: In the present study, monolayers of self-beating hiPS-CMs were grown on ultra-thin circular silicone membranes and deflect under the weight of the culture medium. Rhythmic contractions of the hiPS-CMs induced variations of the membrane deflection. The recorded contraction-relaxation-cycles were analyzed with respect to their amplitudes, durations, time integrals and frequencies. Besides unstimulated force and tensile stress, we investigated the effects of agonists and antagonists acting on Ca²⁺ channels (S-Bay K8644/verapamil) and Na⁺ channels (veratridine/lidocaine). Results: The measured data and simulations for pharmacologically unstimulated contraction resembled findings in native human heart tissue, while the pharmacological dose-response curves were highly accurate and consistent with reference data. Conclusion: We conclude that the combination of the CellDrum with hiPS-CMs offers a fast, facile and precise system for pharmacological, toxicological studies and offers new preclinical basic research potential.},
  language  = {en}
}
@article{ArtmannDigelLinderetal.2008,
  author    = {Artmann, Gerhard and Digel, Ilya and Linder, Peter and Porst, Dariusz},
  title     = {Mechanism of haemoglobin sensing body temperature},
  series = {Tissue Engineering Part A. 14 (2008), H. 5},
  journal   = {Tissue Engineering Part A. 14 (2008), H. 5},
  isbn      = {1937-3341},
  pages     = {754 -- 754},
  year      = {2008},
  language  = {en}
}
@article{MuellerVeggianBochevDidelezetal.1981,
  author    = {M{\"u}ller-Veggian, Mattea and Bochev, B. and Didelez, J. P. and Kutsarova, T.},
  title     = {Mechanism of a induced non equilibrium reactions from particle g-coincidence studies},
  series = {Fr{\"u}hjahrstagung ... des Fachausschusses Kernphysik und Hochenergiephysik der DPG (Sektion A: Kernphysik) / Deutsche Physikalische Gesellschaft (1981)},
  journal   = {Fr{\"u}hjahrstagung ... des Fachausschusses Kernphysik und Hochenergiephysik der DPG (Sektion A: Kernphysik) / Deutsche Physikalische Gesellschaft (1981)},
  pages     = {764},
  year      = {1981},
  language  = {en}
}
@article{PaschmannSchmidt2001,
  author    = {Paschmann, Hans and Schmidt, Stefan},
  title     = {Mechanische Eigenschaften von Glasfasermixbeton. Wie viel Fasern braucht Beton? / Schmidt, Stefan; Paschmann, Hans},
  series = {BFT Betonwerk + Fertigteil-Technik. 67 (2001), H. 10},
  journal   = {BFT Betonwerk + Fertigteil-Technik. 67 (2001), H. 10},
  isbn      = {0373-4331},
  pages     = {64 -- 75},
  year      = {2001},
  language  = {de}
}
@article{DemirciTrzewikLinderetal.2004,
  author    = {Demirci, T. and Trzewik, J. and Linder, Peter and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Mechanical Stimulation of 3T3 Fibroblasts Activates Genes: Real Time PCR Products and Suppliers by Comparison},
  series = {Biomedizinische Technik . 49 (2004), H. Erg.-Bd. 2},
  journal   = {Biomedizinische Technik . 49 (2004), H. Erg.-Bd. 2},
  isbn      = {0932-4666},
  pages     = {1046 -- 1047},
  year      = {2004},
  language  = {en}
}
@article{DemirciTrzewikLinderetal.2004,
  author    = {Demirci, T. and Trzewik, J. and Linder, Peter and Digel, Ilya and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Mechanical Stimulation of 3T3 Fibroblasts Activates Genes: ITGB5 and p53 Responses as Quantified on the mRNA Level},
  series = {Biomedizinische Technik . 49 (2004), H. Erg.-Bd. 2},
  journal   = {Biomedizinische Technik . 49 (2004), H. Erg.-Bd. 2},
  isbn      = {0932-4666},
  pages     = {1030 -- 1031},
  year      = {2004},
  language  = {en}
}
@article{ChloeMalyaranCraveiroetal.2022,
  author    = {Chlo{\´e}, Radermacher and Malyaran, Hanna and Craveiro, Rogerio Bastos and Peglow, Sarah and Behbahani, Mehdi and Pufe, Thomas and Wolf, Michael and Neuss, Sabine},
  title     = {Mechanical loading on cementoblasts: a mini review},
  series = {Osteologie},
  volume    = {31},
  journal   = {Osteologie},
  number    = {2},
  publisher = {Thieme},
  address   = {Stuttgart},
  issn      = {1019-1291},
  doi       = {10.1055/a-1826-0777},
  pages     = {111 -- 118},
  year      = {2022},
  abstract  = {Orthodontic treatments are concomitant with mechanical forces and thereby cause teeth movements. The applied forces are transmitted to the tooth root and the periodontal ligaments which is compressed on one side and tensed up on the other side. Indeed, strong forces can lead to tooth root resorption and the crown-to-tooth ratio is reduced with the potential for significant clinical impact. The cementum, which covers the tooth root, is a thin mineralized tissue of the periodontium that connects the periodontal ligament with the tooth and is build up by cementoblasts. The impact of tension and compression on these cells is investigated in several in vivo and in vitro studies demonstrating differences in protein expression and signaling pathways. In summary, osteogenic marker changes indicate that cyclic tensile forces support whereas static tension inhibits cementogenesis. Furthermore, cementogenesis experiences the same protein expression changes in static conditions as static tension, but cyclic compression leads to the exact opposite of cyclic tension. Consistent with marker expression changes, the singaling pathways of Wnt/ß-catenin and RANKL/OPG show that tissue compression leads to cementum degradation and tension forces to cementogenesis. However, the cementum, and in particular its cementoblasts, remain a research area which should be explored in more detail to understand the underlying mechanism of bone resorption and remodeling after orthodontic treatments.},
  language  = {en}
}
@article{SeifarthGrosseGrossmannetal.2017,
  author    = {Seifarth, Volker and Grosse, Joachim O. and Grossmann, Matthias and Janke, Heinz Peter and Arndt, Patrick and Koch, Sabine and Epple, Matthias and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Mechanical induction of bi-directional orientation of primary porcine bladder smooth muscle cells in tubular fibrin-poly(vinylidene fluoride) scaffolds for ureteral and urethral repair using cyclic and focal balloon catheter stimulation},
  series = {Journal of Biomaterials Applications},
  volume    = {32},
  journal   = {Journal of Biomaterials Applications},
  number    = {3},
  publisher = {Sage},
  address   = {London},
  issn      = {1530-8022},
  doi       = {10.1177/0885328217723178},
  pages     = {321 -- 330},
  year      = {2017},
  language  = {en}
}
@article{LeandroBungCarvalho2014,
  author    = {Leandro, J. and Bung, Daniel Bernhard and Carvalho, R.},
  title     = {Measuring void fraction and velocity fields of a stepped spillway for skimming flow using non-intrusive methods},
  series = {Experiments in fluids},
  journal   = {Experiments in fluids},
  number    = {55},
  publisher = {Springer Nature},
  address   = {Heidelberg},
  issn      = {0723-4864 (Print) ; 1432-1114 (Online)},
  doi       = {10.1007/s00348-014-1732-6},
  pages     = {Art. 1732},
  year      = {2014},
  language  = {en}
}
@article{SchoeningPoghossianSchultze2003,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak and Schultze, Joachim W.},
  title     = {Measuring seven parameters by two ISFET modules in a microcell set-up},
  series = {Int. Journal of Computational Engineering Science. 4 (2003), H. 2},
  journal   = {Int. Journal of Computational Engineering Science. 4 (2003), H. 2},
  isbn      = {1465-8763},
  pages     = {257 -- 260},
  year      = {2003},
  language  = {en}
}
@article{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrey},
  title     = {Measuring of plasma properties induced by non-vacuum electron beam welding},
  series = {Physics of plasma},
  volume    = {19},
  journal   = {Physics of plasma},
  number    = {1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {1089-7674 (E-Journal); 1070-664X (Print)},
  doi       = {10.1063/1.3675874},
  pages     = {1 -- 7},
  year      = {2012},
  abstract  = {Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel's method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.},
  language  = {en}
}
@article{HagemannWiechert1992,
  author    = {Hagemann, Hans-J{\"u}rgen and Wiechert, D. U.},
  title     = {Measurements and calculations of the LP01 intensity of SM fibres far off the core. Hagemann, H.-J.; Wiechert, D. U.},
  series = {Journal of Lightwave Technology (J-LT) / Institute of Electrical and Electronics Engineers (IEEE). 10 (1992), H. 4},
  journal   = {Journal of Lightwave Technology (J-LT) / Institute of Electrical and Electronics Engineers (IEEE). 10 (1992), H. 4},
  isbn      = {0733-8724},
  pages     = {407 -- 412},
  year      = {1992},
  language  = {en}
}
@article{Helsper1986,
  author    = {Helsper, Christoph},
  title     = {Measurement Techniques For Ultrafine Particles},
  series = {Ultrafine aerosols. Properties and behaviour. Proceedings of the 1. International Workshop on Ultrafine Aerosols of the Sonderforschungsbereich 209 'Stoff- und Energietransport in Aerosolen' -'Mass and energy transfer in aerosols'-, held at the Univ. of Duisburg on Sept. 29, 1986},
  journal   = {Ultrafine aerosols. Properties and behaviour. Proceedings of the 1. International Workshop on Ultrafine Aerosols of the Sonderforschungsbereich 209 'Stoff- und Energietransport in Aerosolen' -'Mass and energy transfer in aerosols'-, held at the Univ. of Duisburg on Sept. 29, 1986},
  address   = {Duisburg},
  year      = {1986},
  language  = {en}
}
@article{HoettgesArnoldRouve1994,
  author    = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard},
  title     = {Measurement of transverse mixing using digital image acquisition},
  series = {Mixing and transport in the environment : a memorial volume for Catherine M. Allen (1954-1991) / ed. by Keith J. Beven},
  journal   = {Mixing and transport in the environment : a memorial volume for Catherine M. Allen (1954-1991) / ed. by Keith J. Beven},
  publisher = {Wiley},
  address   = {Chichester [u.a.]},
  isbn      = {0471941425},
  pages     = {XVI, 458 S., [8] Bl : Ill. (z.T. farb.), graph. Da},
  year      = {1994},
  language  = {en}
}
@article{AchtsnichtSchoenenbornOffenhaeusseretal.2019,
  author    = {Achtsnicht, Stefan and Sch{\"o}nenborn, Kristina and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim},
  title     = {Measurement of the magnetophoretic velocity of different superparamagnetic beads},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {477},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2018.10.066},
  pages     = {244 -- 248},
  year      = {2019},
  abstract  = {The movement of magnetic beads due to a magnetic field gradient is of great interest in different application fields. In this report we present a technique based on a magnetic tweezers setup to measure the velocity factor of magnetically actuated individual superparamagnetic beads in a fluidic environment. Several beads can be tracked simultaneously in order to gain and improve statistics. Furthermore we show our results for different beads with hydrodynamic diameters between 200 and 1000 nm from diverse manufacturers. These measurement data can, for example, be used to determine design parameters for a magnetic separation system, like maximum flow rate and minimum separation time, or to select suitable beads for fixed experimental requirements.},
  language  = {en}
}
@article{LiuSchaapBallemansetal.2017,
  author    = {Liu, Z. and Schaap, K. S. and Ballemans, L. and de Blois, E. and Rohde, M. and Paulßen, Elisabeth},
  title     = {Measurement of reaction kinetics of [177Lu]Lu-DOTA-TATE using a microfluidic system},
  series = {Dalton Transactions},
  volume    = {46},
  journal   = {Dalton Transactions},
  number    = {42},
  issn      = {1477-9234},
  doi       = {10.1039/C7DT01830D},
  pages     = {14669 -- 14676},
  year      = {2017},
  language  = {en}
}
@article{MuellerVeggianBeuscherHaennietal.1979,
  author    = {M{\"u}ller-Veggian, Mattea and Beuscher, H. and Haenni, D. R. and Lieder, R. M.},
  title     = {Measurement of low-energy conversion eclectrons with the orange-ß-spectrometer},
  series = {Annual report 1978 / Kernforschungsanlage J{\"u}lich Institut f{\"u}r Kernphysik / Hrsg.: A. F{\"a}ssler. - (Spezielle Berichte der Kernforschungsanlage J{\"u}lich ; 36)},
  journal   = {Annual report 1978 / Kernforschungsanlage J{\"u}lich Institut f{\"u}r Kernphysik / Hrsg.: A. F{\"a}ssler. - (Spezielle Berichte der Kernforschungsanlage J{\"u}lich ; 36)},
  publisher = {Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {39},
  year      = {1979},
  language  = {en}
}
@article{StiemerThomaBraun2023,
  author    = {Stiemer, Luc Nicolas and Thoma, Andreas and Braun, Carsten},
  title     = {MBT3D: Deep learning based multi-object tracker for bumblebee 3D flight path estimation},
  series = {PLoS ONE},
  volume    = {18},
  journal   = {PLoS ONE},
  number    = {9},
  publisher = {PLOS},
  address   = {San Fancisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0291415},
  pages     = {e0291415},
  year      = {2023},
  abstract  = {This work presents the Multi-Bees-Tracker (MBT3D) algorithm, a Python framework implementing a deep association tracker for Tracking-By-Detection, to address the challenging task of tracking flight paths of bumblebees in a social group. While tracking algorithms for bumblebees exist, they often come with intensive restrictions, such as the need for sufficient lighting, high contrast between the animal and background, absence of occlusion, significant user input, etc. Tracking flight paths of bumblebees in a social group is challenging. They suddenly adjust movements and change their appearance during different wing beat states while exhibiting significant similarities in their individual appearance. The MBT3D tracker, developed in this research, is an adaptation of an existing ant tracking algorithm for bumblebee tracking. It incorporates an offline trained appearance descriptor along with a Kalman Filter for appearance and motion matching. Different detector architectures for upstream detections (You Only Look Once (YOLOv5), Faster Region Proposal Convolutional Neural Network (Faster R-CNN), and RetinaNet) are investigated in a comparative study to optimize performance. The detection models were trained on a dataset containing 11359 labeled bumblebee images. YOLOv5 reaches an Average Precision of AP = 53, 8\%, Faster R-CNN achieves AP = 45, 3\% and RetinaNet AP = 38, 4\% on the bumblebee validation dataset, which consists of 1323 labeled bumblebee images. The tracker's appearance model is trained on 144 samples. The tracker (with Faster R-CNN detections) reaches a Multiple Object Tracking Accuracy MOTA = 93, 5\% and a Multiple Object Tracking Precision MOTP = 75, 6\% on a validation dataset containing 2000 images, competing with state-of-the-art computer vision methods. The framework allows reliable tracking of different bumblebees in the same video stream with rarely occurring identity switches (IDS). MBT3D has much lower IDS than other commonly used algorithms, with one of the lowest false positive rates, competing with state-of-the-art animal tracking algorithms. The developed framework reconstructs the 3-dimensional (3D) flight paths of the bumblebees by triangulation. It also handles and compares two alternative stereo camera pairs if desired.},
  language  = {en}
}
@article{HartungHornHuschkeetal.2009,
  author    = {Hartung, Frank and Horn, Uwe and Huschke, J{\"o}rg and Kampmann, Markus},
  title     = {MBMS—IP Multicast/Broadcast in 3G Networks / Hartung, Frank ; Horn, Uwe ; Huschke, J{\"o}rg ; Kampmann, Markus ; Lohmar, Thorsten},
  series = {International Journal of Digital Multimedia Broadcasting. 2009 (2009)},
  journal   = {International Journal of Digital Multimedia Broadcasting. 2009 (2009)},
  isbn      = {1687-7586},
  pages     = {1 -- 25},
  year      = {2009},
  language  = {en}
}
@article{Mayer2003,
  author    = {Mayer, Claudia},
  title     = {MBA-Studiengang "Entrepreneurship" in D{\"u}ren bald auch mit Qualit{\"a}tssiegel},
  series = {Fachhochschule <Aachen>: Fachblatt. 2003 (2003), H. 2},
  journal   = {Fachhochschule <Aachen>: Fachblatt. 2003 (2003), H. 2},
  isbn      = {1430-7707},
  pages     = {10 -- 10},
  year      = {2003},
  language  = {de}
}
@article{BienerSasse1992,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Maßnahmen zur Qualit{\"a}tssicherung bei der Herstellung von Deponieabdichtungen},
  series = {Industrial waste management : waste reduction and treatment, site remediation and water purification ; ENVIROTECH Vienna 1992, Austria, Vienna, April 22 - 24, 1992 ; proceedings / International Society for Environmental Protection. Ed. by W. Pillmann},
  journal   = {Industrial waste management : waste reduction and treatment, site remediation and water purification ; ENVIROTECH Vienna 1992, Austria, Vienna, April 22 - 24, 1992 ; proceedings / International Society for Environmental Protection. Ed. by W. Pillmann},
  publisher = {ISEP},
  address   = {Vienna},
  isbn      = {3-9500036-3-0},
  pages     = {562 -- 571},
  year      = {1992},
  language  = {de}
}
@article{Pietsch1993,
  author    = {Pietsch, Wolfram},
  title     = {Maßgeschneidertes Training f{\"u}r Software-Engineering und CASE},
  series = {ExperPraxis : ExperTeam-Jahrbuch f{\"u}r die Praxis der Informationsverarbeitung},
  journal   = {ExperPraxis : ExperTeam-Jahrbuch f{\"u}r die Praxis der Informationsverarbeitung},
  issn      = {0944-2863},
  pages     = {15 -- 17},
  year      = {1993},
  language  = {de}
}
@article{HellwigVolkmann2004,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Maximally local-edge-connected graphs and digraphs},
  series = {Ars combinatoria},
  volume    = {Vol. 72},
  journal   = {Ars combinatoria},
  issn      = {0381-7032},
  pages     = {295 -- 306},
  year      = {2004},
  language  = {en}
}
@article{HellwigVolkmann2003,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Maximally edge-connected digraphs},
  series = {Australasian journal of combinatorics},
  volume    = {Vol. 27},
  journal   = {Australasian journal of combinatorics},
  issn      = {1034-4942 (E-Journal); 1034-4942 (Print)},
  pages     = {23 -- 32},
  year      = {2003},
  language  = {en}
}
@article{HellwigVolkmann2008,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Maximally edge-connected and vertex-connected graphs and digraphs : a survey},
  series = {Discrete mathematics},
  volume    = {Vol. 308},
  journal   = {Discrete mathematics},
  number    = {Iss. 15},
  issn      = {1872-681X (E-Journal); 0012-365X (Print)},
  pages     = {3265 -- 3296},
  year      = {2008},
  language  = {en}
}
@article{ButenwegGellertMeskouris2007,
  author    = {Butenweg, Christoph and Gellert, Christoph and Meskouris, Konstantin},
  title     = {Mauerwerksw{\"a}nde unter zyklischer Schubbeanspruchung},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 11},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 6},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.200700356},
  pages     = {356 -- 362},
  year      = {2007},
  language  = {de}
}
@article{Kowalski2008,
  author    = {Kowalski, Julia},
  title     = {Mathematische Murgangmodellierung},
  series = {Newsletter Naturgefahren},
  volume    = {2008},
  journal   = {Newsletter Naturgefahren},
  number    = {2},
  organization    = {Eidgen{\"o}ssisches Institut f{\"u}r Schnee-und Lawinenforschung SLF},
  pages     = {4 -- 5},
  year      = {2008},
  language  = {de}
}