@article{Mueller2013,
  author    = {M{\"u}ller, Thomas},
  title     = {Streitwertermittlung nach dem neuen \S 52 Abs. 3 S. 2 GKG - Auswirkungen auch bei der Besteuerung von Unternehmen},
  series = {Betriebs-Berater : BB},
  journal   = {Betriebs-Berater : BB},
  number    = {H. 42},
  publisher = {Beck},
  address   = {M{\"u}ller},
  issn      = {0947-0581 (E-Journal); 0340-7918 (Print)},
  pages     = {2519 -- 2521},
  year      = {2013},
  language  = {de}
}
@article{ElsenHartungHornetal.2001,
  author    = {Elsen, Ingo and Hartung, Frank and Horn, Uwe and Kampmann, Markus and Peters, Liliane},
  title     = {Streaming technology in 3G mobile communication systems},
  series = {Computer : innovative technology for computer professionals},
  volume    = {34},
  journal   = {Computer : innovative technology for computer professionals},
  number    = {9 Seiten},
  editor    = {Voas, Jeffrey},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0018-9162},
  pages     = {46 -- 52},
  year      = {2001},
  abstract  = {Third-generation mobile communication systems will combine standardized streaming with a range of unique services to provide high-quality Internet content that meets the specific needs of the rapidly growing mobile market.},
  language  = {en}
}
@article{SchaeferLampeyMende1989,
  author    = {Sch{\"a}fer, Horst and Lampey, H. and Mende, H. H.},
  title     = {Stray-field profile of single M-shaped Si-Fe transformer sheets and the resulting interaction in a stack},
  series = {Physica Scripta. 39 (1989), H. 4},
  journal   = {Physica Scripta. 39 (1989), H. 4},
  isbn      = {0031-8949},
  pages     = {520 -- 522},
  year      = {1989},
  language  = {en}
}
@article{SchaeferMende1987,
  author    = {Sch{\"a}fer, Horst and Mende, H. H.},
  title     = {Stray field profile of grain-oriented rectangular 3\% SiFe sheets in dependence on vertical and in-plane magnetic fields},
  series = {Physica Status Solidi (A). 100 (1987), H. 2},
  journal   = {Physica Status Solidi (A). 100 (1987), H. 2},
  isbn      = {0031-8965},
  pages     = {621 -- 632},
  year      = {1987},
  language  = {en}
}
@article{SimonisLuethWangetal.2003,
  author    = {Simonis, A. and L{\"u}th, H. and Wang, J. and Sch{\"o}ning, Michael Josef},
  title     = {Strategies of miniaturised reference electrodes integrated in a silicon-based „one chip" pH sensor},
  series = {Sensors. 3 (2003), H. 9},
  journal   = {Sensors. 3 (2003), H. 9},
  isbn      = {1424-8220},
  pages     = {330 -- 339},
  year      = {2003},
  language  = {en}
}
@article{OberlaenderKirchnerKeusgenetal.2015,
  author    = {Oberl{\"a}nder, Jan and Kirchner, Patrick and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Strategies in developing thin-film sensors for monitoring aseptic food processes : Theoretical considerations and investigations of passivation materials},
  series = {Electrochimica Acta},
  volume    = {183},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-4686},
  doi       = {10.1016/j.electacta.2015.06.126},
  pages     = {130 -- 136},
  year      = {2015},
  abstract  = {The sterilization of packages in aseptic food processes is highly significant to maintain a consumer-safe product with extended shelf-life. Today, the sterilization of food packages is predominantly accomplished by gaseous hydrogen peroxide (H2O2) in combination with heat. In order to monitor this sterilization process, calorimetric gas sensors as differential set-up of two platinum temperature sensors representing a catalytically active (additionally deposition of MnO2) and a passive segment have been recently developed. The temperature rise of the exothermic decomposition serves as an indicator of the present H2O2 concentration. In the present work, a theoretical approach considering the sensor's thermochemistry and physical transport phenomena was formulated to evaluate the temperature rise based on the energy content of gaseous H2O2. In a further part of this work, three polymers have been analyzed with respect to their application as passivation materials. The examined polymers are photoresist SU-8, perfluoroalkoxy (PFA) and fluorinated ethylene propylene (FEP). Thermal analyses by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) have been conducted to determine the operation limits of the polymers. The overall chemical resistance and stability of the polymers against the harsh environmental conditions during the sterilization process have been examined by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR).},
  language  = {en}
}
@article{KeusgenSchoening2004,
  author    = {Keusgen, M. and Sch{\"o}ning, Michael Josef},
  title     = {Strategies for biosensoric detection of potential drugs in nature},
  series = {Biomedizinische Technik. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik. 49 (2004), H. 2},
  isbn      = {0932-4666},
  pages     = {1004 -- 1005},
  year      = {2004},
  language  = {en}
}
@article{ZiemonsBerghoffLanskeetal.1988,
  author    = {Ziemons, Karl and Berghoff, G. and Lanske, D. and Schultze, K.},
  title     = {Strangeness production in deep inelastic muon-nucleon scattering},
  series = {Verhandlungen der Deutschen Physikalischen Gesellschaft},
  volume    = {23},
  journal   = {Verhandlungen der Deutschen Physikalischen Gesellschaft},
  number    = {5},
  isbn      = {0420-0195},
  pages     = {T309 -- T309},
  year      = {1988},
  language  = {en}
}
@article{FoersterLentzenGerthsen1995,
  author    = {F{\"o}rster, Arnold and Lentzen, M. and Gerthsen, D.},
  title     = {Strain relaxation of lattice-mismatched In0.2Ga0.8As/GaAs superlattices on GaAs(001) substrates / M. Lentzen ; D. Gerthsen ; A. F{\"o}rster ...},
  series = {Microscopy of semiconducting materials 1995 : proceedings of the Institute of Physics Conference held at Oxford University, 20 - 23 March 1995 / Ed. by A G Cullis ... - (Conference series / Institute of Physics ; 146)},
  journal   = {Microscopy of semiconducting materials 1995 : proceedings of the Institute of Physics Conference held at Oxford University, 20 - 23 March 1995 / Ed. by A G Cullis ... - (Conference series / Institute of Physics ; 146)},
  publisher = {Institute of Physics},
  address   = {Bristol [u.a.]},
  isbn      = {0-7503-0347-6},
  pages     = {357 -- ff.},
  year      = {1995},
  language  = {en}
}
@article{FoersterRosenauerRemmele1997,
  author    = {F{\"o}rster, Arnold and Rosenauer, A. and Remmele, T.},
  title     = {Strain determination in mismatched semiconductor heterostructures by the digital analysis of lattice images / A. Rosenauer ; T. Remmele ; U. Fischer ; A. F{\"o}rster ...},
  series = {Microscopy of semiconducting materials 1997 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 7 - 10 April 1997 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 157)},
  journal   = {Microscopy of semiconducting materials 1997 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 7 - 10 April 1997 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 157)},
  publisher = {Institute of Physics},
  address   = {Bristol [u.a.]},
  isbn      = {0-7503-0464-2},
  pages     = {39 -- ff.},
  year      = {1997},
  language  = {en}
}
@article{FoersterOhlerKohleick1994,
  author    = {F{\"o}rster, Arnold and Ohler, C. and Kohleick, R.},
  title     = {Strain dependence of the valence-band offset in InAs/GaAs heterojunctions determined by ultraviolet photoelectron spectroscopy / C. Ohler ; R. Kohleick ; A. F{\"o}rster ...},
  series = {Physical Review B . 50 (1994), H. 11},
  journal   = {Physical Review B . 50 (1994), H. 11},
  isbn      = {0163-1829},
  pages     = {7833 -- 7837},
  year      = {1994},
  language  = {en}
}
@article{FoersterOhlerMoers1993,
  author    = {F{\"o}rster, Arnold and Ohler, C. and Moers, J.},
  title     = {Strain dependence of the valence-band offset in arsenide compound heterojunctions determined by photoelectron spectroscopy / C. Ohler ; J. Moers ; A. F{\"o}rster ...},
  series = {Journal of Vacuum Science \& Technology B: Microelectronics and Nanometer Structures. 13 (1993), H. 4},
  journal   = {Journal of Vacuum Science \& Technology B: Microelectronics and Nanometer Structures. 13 (1993), H. 4},
  isbn      = {1071-1023},
  pages     = {1728 -- 1735},
  year      = {1993},
  language  = {en}
}
@article{GerhardtRudolph2000,
  author    = {Gerhardt, Hans Joachim and Rudolph, M.},
  title     = {Steuerungsstrategien f{\"u}r Fensterbet{\"a}tigungen von Hochh{\"a}usern. Nat{\"u}rliche L{\"u}ftung},
  series = {HLH - Heizung, L{\"u}ftung, Klima, Haustechnik. 51 (2000), H. 9},
  journal   = {HLH - Heizung, L{\"u}ftung, Klima, Haustechnik. 51 (2000), H. 9},
  isbn      = {1436-5103},
  pages     = {48 -- 52},
  year      = {2000},
  language  = {de}
}
@article{Alt1986,
  author    = {Alt, Helmut},
  title     = {Steuersenkungsgesetz-Auswirkungen und Berechnung},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Jg. 85},
  journal   = {Elektrizit{\"a}tswirtschaft},
  issn      = {0013-5496},
  pages     = {238 -- 242},
  year      = {1986},
  language  = {de}
}
@article{Alt1987,
  author    = {Alt, Helmut},
  title     = {Steuersenkungs-Erweiterungsgesetz 1988 zur Gesamtentlastung der Einkommensteuer},
  series = {Betriebs-Berater : BB ; Zeitschrift f{\"u}r Recht und Wirtschaft},
  volume    = {Vol. 42},
  journal   = {Betriebs-Berater : BB ; Zeitschrift f{\"u}r Recht und Wirtschaft},
  number    = {H. 32},
  issn      = {0340-7918},
  pages     = {2207 -- 2208},
  year      = {1987},
  language  = {de}
}
@article{Alt1989,
  author    = {Alt, Helmut},
  title     = {Steuerreformgesetz 1990},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Bd. 88},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 1/2},
  issn      = {0013-5496},
  pages     = {78 -- 83},
  year      = {1989},
  language  = {de}
}
@article{Alt1989,
  author    = {Alt, Helmut},
  title     = {Steuerreformgesetz 1990},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Jg. 88},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 2},
  issn      = {0947-0581 (E-Journal); 0340-7918 (Print)},
  pages     = {120 -- 121},
  year      = {1989},
  language  = {de}
}
@article{Rick2007,
  author    = {Rick, Heino},
  title     = {Steuerliche Aspekte zum Vertragsarztrechts{\"a}nderungsgesetz (V{\"A}ndG) 2007},
  series = {BVGD-Info : Mitteilungen des Bundesverbandes Gastroenterologie Deutschland. 2 (2007), H. 4},
  journal   = {BVGD-Info : Mitteilungen des Bundesverbandes Gastroenterologie Deutschland. 2 (2007), H. 4},
  pages     = {91 -- 92},
  year      = {2007},
  language  = {de}
}
@article{Blome1999,
  author    = {Blome, Hans-Joachim},
  title     = {Sternstunden der Astronomie Extraterrestrische Grundlagenforschung},
  series = {Kultur und Technik. 23 (1999), H. 1},
  journal   = {Kultur und Technik. 23 (1999), H. 1},
  isbn      = {0344-5690},
  pages     = {18 -- 27},
  year      = {1999},
  language  = {de}
}
@article{MangKricheldorf1983,
  author    = {Mang, Thomas and Kricheldorf, Hans R.},
  title     = {Stereospecificity of peptide synthesis by means of phosphorus derivatives: a model of peptide synthesis in molecular evolution / Kricheldorf, Hans R. ; Mang, Thomas},
  series = {International Journal of Biological Macromolecules. 5 (1983), H. 5},
  journal   = {International Journal of Biological Macromolecules. 5 (1983), H. 5},
  isbn      = {0141-8130},
  pages     = {258 -- 266},
  year      = {1983},
  language  = {en}
}
@article{SelmerDarleyCleggetal.2003,
  author    = {Selmer, Thorsten and Darley, Dan J. and Clegg, William and Harrington, Ross W.},
  title     = {Stereocontrolled Synthesis of (2R,3S)-2-Methylisocitrate, a Central Intermediate in the Methylcitrate Cycle / Darley, Dan J. ; Selmer, Thorsten ; Clegg, William ; Harrington, Ross W. ; Buckel, Wolfgang ; Golding, Bernardt},
  series = {Helvetica chimica acta. 86 (2003), H. 12},
  journal   = {Helvetica chimica acta. 86 (2003), H. 12},
  isbn      = {1522-2675},
  pages     = {3991 -- 3999},
  year      = {2003},
  language  = {en}
}
@article{SelmerScottNaeseretal.2004,
  author    = {Selmer, Thorsten and Scott, Richard and N{\"a}ser, Ulrike and Friedrich, Peter},
  title     = {Stereochemistry of hydrogen removal from the 'unactivated' C-3 position of 4-hydroxybutyryl-CoA catalysed by 4-hydroxybutyryl-CoA dehydratase / Scott, R. ; N{\"a}ser, U. ; Friedrich, P. ; Selmer, T. ; Buckel, W. ; Golding, BT.},
  series = {Chemical Communications : ChemCom (2004)},
  journal   = {Chemical Communications : ChemCom (2004)},
  isbn      = {1364-548X},
  pages     = {1210 -- 1211},
  year      = {2004},
  language  = {en}
}
@article{Heinrichs1992,
  author    = {Heinrichs, Horst},
  title     = {STEP bietet mehr},
  publisher = {IKOSS},
  address   = {Stuttgart},
  pages     = {327 -- 344},
  year      = {1992},
  language  = {de}
}
@article{LaackRefisch1986,
  author    = {Laack, Walter van and Refisch, A.},
  title     = {Stellenwert der Kniegelenksarthroskopie aus diagnostischer und therapeutischer Sicht},
  series = {Aktuelle Ergebnisse der Osteologie : Timmendorfer Strand, 21. - 23. November 1985 / hrsg. von P. Dietsch},
  journal   = {Aktuelle Ergebnisse der Osteologie : Timmendorfer Strand, 21. - 23. November 1985 / hrsg. von P. Dietsch},
  publisher = {de Gruyter},
  address   = {Berlin},
  isbn      = {3-11-011147-0},
  pages     = {XIV, 343 S. : Ill., graph. Darst.},
  year      = {1986},
  language  = {de}
}
@article{DoeringRegerKuhnhenneetal.2015,
  author    = {D{\"o}ring, Bernd and Reger, Vitali and Kuhnhenne, Markus and Feldmann, Markus and Kesti, Jyrki and Lawson, Mark and Botti, Andrea},
  title     = {Steel solutions for enabling zero-energy buildings},
  series = {Steel Construction - Design and Research},
  volume    = {8},
  journal   = {Steel Construction - Design and Research},
  number    = {3},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1867-0539},
  doi       = {10.1002/stco.201510029},
  pages     = {194 -- 200},
  year      = {2015},
  language  = {en}
}
@article{Benkner1995,
  author    = {Benkner, Thorsten},
  title     = {Statistisches Multiplexen von Sprache und Daten in TDMA-Mobilfunksystemen der dritten Generation},
  series = {40. Internationales Wissenschaftliches Kolloquium : 18. - 21.09.1995 / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen. [Hrsg. Dagmar Schipanski]},
  journal   = {40. Internationales Wissenschaftliches Kolloquium : 18. - 21.09.1995 / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen. [Hrsg. Dagmar Schipanski]},
  address   = {Ilmenau},
  year      = {1995},
  language  = {de}
}
@article{Weigand2012,
  author    = {Weigand, Christoph},
  title     = {Statistical Tests Based on Reliability and Precision},
  series = {Economic Quality Control : EQC ; international journal for quality and reliability},
  volume    = {27},
  journal   = {Economic Quality Control : EQC ; international journal for quality and reliability},
  number    = {1},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {1869-6147},
  doi       = {10.1515/eqc-2012-0002},
  pages     = {43 -- 64},
  year      = {2012},
  abstract  = {The construction of a statistical test is investigated which is based only on "reliability" and "precision" as quality criteria. The reliability of a statistical test is quantifiedin a straightforward way by the probability that the decision of the test is correct. However, the quantification of the precision of a statistical test is not at all evident. Thereforethe paper presents and discusses several approaches. Moreover the distinction of "nullhypothesis" and "alternative hypothesis" is not necessary any longer.},
  language  = {en}
}
@article{HeinrichBlumBussmannetal.2002,
  author    = {Heinrich, U. and Blum, A. and Bussmann, N. and Engels, R. and Kemmerling, G. and Weber, S. and Ziemons, Karl},
  title     = {Statistical studies on the light output and energy resolution of small LSO single crystals with different surface treatments combined with various reflector materials},
  series = {Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  volume    = {486},
  journal   = {Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  number    = {1-2},
  issn      = {0168-9002},
  pages     = {60 -- 66},
  year      = {2002},
  abstract  = {The optimization of light output and energy resolution of scintillators is of special interest for the development of high resolution and high sensitivity PET. The aim of this work is to obtain statistically reliable results concerning optimal surface treatment of scintillation crystals and the selection of reflector material. For this purpose, raw, mechanically polished and etched LSO crystals (size 2×2×10 mm3) were combined with various reflector materials (Teflon tape, Teflon matrix, BaSO4) and exposed to a 22Na source. In order to ensure the statistical reliability of the results, groups of 10 LSO crystals each were measured for all combinations of surface treatment and reflector material. Using no reflector material the light output increased up to 551±35\% by mechanical polishing the surface compared to 100±5\% for raw crystals. Etching the surface increased the light output to 441±29\%. The untreated crystals had an energy resolution of 24.6±4.0\%. By mechanical polishing the surface it was possible to achieve an energy resolution of 13.2±0.8\%, by etching of 14.8±0.7\%. In combination with BaSO4 as reflector material the maximum increase of light output has been established to 932±57\% for mechanically polished and 895±61\% for etched crystals. The combination with BaSO4 also caused the best improvement of the energy resolution up to 11.6±0.2\% for mechanically polished and 12.2±0.3\% for etched crystals. Relating to the light output there was no significant statistical difference between the two surface treatments in combination with BaSO4. In contrast to this, the statistical results of the energy resolution have shown the combination of mechanical polishing and BaSO4 as the optimum.},
  language  = {en}
}
@article{HartungGirod1996,
  author    = {Hartung, Frank and Girod, Bernd},
  title     = {Statistical optimization of switched two-level quantizers with application to DPCM encoding of color video / Hartung, Frank ; Girod, Bernd},
  series = {IEEE International Conference on Acoustics, Speech, and Signal Processing, 1996. ICASSP-96. Conference Proceedings., 1996},
  journal   = {IEEE International Conference on Acoustics, Speech, and Signal Processing, 1996. ICASSP-96. Conference Proceedings., 1996},
  isbn      = {0-7803-3192-3},
  pages     = {1974 -- 1977},
  year      = {1996},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Statistical modeling of laser welding of DP/TRIP steel sheets},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.05.025},
  pages     = {92 -- 101},
  year      = {2012},
  abstract  = {In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box-Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.},
  language  = {en}
}
@article{BaringhausGaigallThiele2018,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel and Thiele, Jan Philipp},
  title     = {Statistical inference for L²-distances to uniformity},
  series = {Computational Statistics},
  volume    = {2018},
  journal   = {Computational Statistics},
  number    = {33},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1613-9658},
  doi       = {10.1007/s00180-018-0820-0},
  pages     = {1863 -- 1896},
  year      = {2018},
  abstract  = {The paper deals with the asymptotic behaviour of estimators, statistical tests and confidence intervals for L²-distances to uniformity based on the empirical distribution function, the integrated empirical distribution function and the integrated empirical survival function. Approximations of power functions, confidence intervals for the L²-distances and statistical neighbourhood-of-uniformity validation tests are obtained as main applications. The finite sample behaviour of the procedures is illustrated by a simulation study.},
  language  = {en}
}
@article{KunkelGebhardtMpofuetal.2018,
  author    = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbaulani and Kallweit, Stephan},
  title     = {Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel},
  series = {The International Journal of Advanced Manufacturing Technology},
  volume    = {98},
  journal   = {The International Journal of Advanced Manufacturing Technology},
  number    = {5-8},
  publisher = {Springer},
  address   = {London},
  issn      = {0268-3768},
  doi       = {10.1007/s00170-018-2040-8},
  pages     = {1409 -- 1431},
  year      = {2018},
  abstract  = {The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.},
  language  = {en}
}
@article{Alt1982,
  author    = {Alt, Helmut},
  title     = {Statische oder dynamische Wirtschaftlichkeitsberechnung bei Investitionen zur Energieeinsparung},
  series = {Elektrow{\"a}rme international Edition B: Industrielle Elektrow{\"a}rme : IEW = Industrial applications of electro-heat : EWI ; Zeitschrift f{\"u}r das gesamte Gebiet der Elektrow{\"a}rme in Industrie, Gewerbe und Haushalt},
  volume    = {Jg. 40},
  journal   = {Elektrow{\"a}rme international Edition B: Industrielle Elektrow{\"a}rme : IEW = Industrial applications of electro-heat : EWI ; Zeitschrift f{\"u}r das gesamte Gebiet der Elektrow{\"a}rme in Industrie, Gewerbe und Haushalt},
  number    = {H. 3/4},
  issn      = {0340-3521},
  pages     = {166 -- 172},
  year      = {1982},
  language  = {de}
}
@article{MuellerVeggianGonoLieder1976,
  author    = {M{\"u}ller-Veggian, Mattea and Gono, Y. and Lieder, R. M.},
  title     = {Stati isomerici nei nuclei ¹⁸⁹,¹⁹¹,¹⁹³ Au},
  series = {Bollettino della Societ{\`a} Italiana di Fisica},
  volume    = {1976},
  journal   = {Bollettino della Societ{\`a} Italiana di Fisica},
  publisher = {Zanichelli},
  address   = {Bologna},
  isbn      = {0037-8801},
  pages     = {56},
  year      = {1976},
  language  = {de}
}
@article{LehnertzMormannOsterhageetal.2007,
  author    = {Lehnertz, Klaus and Mormann, Florian and Osterhage, Hannes and Andy, M{\"u}ller and Prusseit, Jens and Chernihovskyi, Anton and Staniek, Matth{\"a}us and Krug, Dieter and Bialonski, Stephan and Elger, Christian E.},
  title     = {State-of-the-art of seizure prediction},
  series = {Journal of Clinical Neurophysiology},
  volume    = {24},
  journal   = {Journal of Clinical Neurophysiology},
  number    = {2},
  issn      = {1537-1603},
  doi       = {10.1097/WNP.0b013e3180336f16},
  pages     = {147 -- 153},
  year      = {2007},
  language  = {en}
}
@article{HorstmannBialonskiNoenningetal.2010,
  author    = {Horstmann, Marie-Therese and Bialonski, Stephan and Noenning, Nina and Mai, Heinke and Prusseit, Jens and Wellmer, J{\"o}rg and Hinrichs, Hermann and Lehnertz, Klaus},
  title     = {State dependent properties of epileptic brain networks: Comparative graph-theoretical analyses of simultaneously recorded EEG and MEG},
  series = {Clinical Neurophysiology},
  volume    = {121},
  journal   = {Clinical Neurophysiology},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1388-2457},
  doi       = {10.1016/j.clinph.2009.10.013},
  pages     = {172 -- 185},
  year      = {2010},
  abstract  = {Objective To investigate whether functional brain networks of epilepsy patients treated with antiepileptic medication differ from networks of healthy controls even during the seizure-free interval. Methods We applied different rules to construct binary and weighted networks from EEG and MEG data recorded under a resting-state eyes-open and eyes-closed condition from 21 epilepsy patients and 23 healthy controls. The average shortest path length and the clustering coefficient served as global statistical network characteristics. Results Independent on the behavioral condition, epileptic brains exhibited a more regular functional network structure. Similarly, the eyes-closed condition was characterized by a more regular functional network structure in both groups. The amount of network reorganization due to behavioral state changes was similar in both groups. Consistent findings could be achieved for networks derived from EEG but hardly from MEG recordings, and network construction rules had a rather strong impact on our findings. Conclusions Despite the locality of the investigated processes epileptic brain networks differ in their global characteristics from non-epileptic brain networks. Further methodological developments are necessary to improve the characterization of disturbed and normal functional networks. Significance An increased regularity and a diminished modulation capability appear characteristic of epileptic brain networks.},
  language  = {en}
}
@article{SchaeferRessSpahnetal.1998,
  author    = {Sch{\"a}fer, Horst and Ress, H. R. and Spahn, W. and Ebel, R. (u.a.)},
  title     = {Start of misfit relaxation in GaAs-ZnSe heterostructures},
  series = {Journal of Crystal Growth. 184-185 (1998)},
  journal   = {Journal of Crystal Growth. 184-185 (1998)},
  isbn      = {0022-0248},
  pages     = {90 -- 94},
  year      = {1998},
  language  = {en}
}
@article{VerschitzButenweg2014,
  author    = {Verschitz, Daniel and Butenweg, Christoph},
  title     = {Standsicherheitsnachweis von Beh{\"a}ltern f{\"u}r Kleinkl{\"a}ranlagen},
  series = {ACWA aktuell},
  journal   = {ACWA aktuell},
  number    = {12 - 9/2014},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  pages     = {10},
  year      = {2014},
  abstract  = {Die PIA GmbH pr{\"u}ft seit fast 8 Jahren die Standsicherheit von Beh{\"a}ltern f{\"u}r Kleinkl{\"a}ranlagen. Diese bestehen in der Regel aus Kunststoff oder Beton und m{\"u}ssen {\"u}ber ihre gesamte Lebensdauer den Beanspruchungen aus Handhabung, Einbau und Betrieb standhalten. Die Standsicherheit kann nach EN 12566 wahlweise durch einen rechnerischen Nachweis oder durch einen praktischen Nachweis wie die Bruchlastpr{\"u}fung oder die Pr{\"u}fung in der Grube erfolgen.},
  language  = {de}
}
@article{HartungNohBaccichetetal.2009,
  author    = {Hartung, Frank and Noh, Jeonghun and Baccichet, Pierpaolo and Mavlankar, Aditya},
  title     = {Standford Peer-to-Peer Mulicast (SPPM) - Overview and recent Extensions / Noh, Jeonghun ; Baccichet, Pierpaolo ; Hartung, Frank ; Mavlankar, Aditya ; Girod, Bernd},
  isbn      = {978-1-4244-4593-6},
  pages     = {1 -- 4},
  year      = {2009},
  language  = {en}
}
@article{StarkeDrews1984,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Stand der Sensorentwicklung fuer Schutzgasschweissroboter},
  series = {Schweissen und Schneiden. 36 (1984), H. 4},
  journal   = {Schweissen und Schneiden. 36 (1984), H. 4},
  isbn      = {0036-7184},
  pages     = {166 -- 172},
  year      = {1984},
  language  = {de}
}
@article{AnikAnik1991,
  author    = {Anik, Sabri and Anik, Salahaddin},
  title     = {Stand der Schweißtechnik in der T{\"u}rkei},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {43},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {3},
  issn      = {0036-7184},
  pages     = {142 -- 145},
  year      = {1991},
  language  = {de}
}
@article{HaissigDoerenWilmes1981,
  author    = {Haissig, Manfred and D{\"o}ren, Horst-Peter and Wilmes, S.},
  title     = {Stand der Entwicklung des Horizontal-Stranggießens von Edelstahl bei der B{\"o}hler AG},
  series = {Stahl und Eisen. Zeitschrift f{\"u}r die Herstellung und Verarbeitung von Eisen und Stahl. Hrsg.: Verein Deutscher Eisenh{\"u}ttenleute (VDEh) ; Wirtschaftsvereinigung Stahl. 101 (1981), H. 6},
  journal   = {Stahl und Eisen. Zeitschrift f{\"u}r die Herstellung und Verarbeitung von Eisen und Stahl. Hrsg.: Verein Deutscher Eisenh{\"u}ttenleute (VDEh) ; Wirtschaftsvereinigung Stahl. 101 (1981), H. 6},
  issn      = {0340-4803},
  pages     = {383 -- 390},
  year      = {1981},
  language  = {de}
}
@article{DielmannBockSonnek2007,
  author    = {Dielmann, Klaus-Peter and Bock, Alexis and Sonnek, Frederic},
  title     = {Stand der CO2-Allokationspl{\"a}ne in Europa und Durchsetzung der Monitoring-Richtlinien},
  series = {VGB PowerTech : international journal for electricity and heat generation},
  volume    = {87},
  journal   = {VGB PowerTech : international journal for electricity and heat generation},
  number    = {3},
  isbn      = {1435-3199},
  pages     = {40 -- 46},
  year      = {2007},
  language  = {de}
}
@article{BreitbachNickelSchubert1990,
  author    = {Breitbach, Gerd and Nickel, H. and Schubert, F.},
  title     = {Stand der Aktivit{\"a}ten zu Regelwerken f{\"u}r heliumgek{\"u}hlte Hochtemperaturreaktoren / H. Nickel ; F. Schubert ; G. Breitbach},
  series = {Atomwirtschaft - Atomtechnik. 35 (1990), H. 2},
  journal   = {Atomwirtschaft - Atomtechnik. 35 (1990), H. 2},
  isbn      = {0004-721x},
  pages     = {74 -- 79},
  year      = {1990},
  language  = {de}
}
@article{ButenwegMarinkovićFehlingetal.2018,
  author    = {Butenweg, Christoph and Marinković, Marko and Fehling, Ekkehard and Pfetzing, Thomas},
  title     = {Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk unter kombinierten seismischen Belastungen in und senkrecht zur Wandebene},
  series = {Bauingenieur},
  volume    = {93},
  journal   = {Bauingenieur},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  isbn      = {0005-6650},
  pages     = {2 -- 10},
  year      = {2018},
  language  = {de}
}
@article{Lohse2004,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Bautechnische Zahlentafeln : [jetzt mit neuer DIN 1052, DIN1053-1 und DIN 1054] / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... 31., vollst. {\"u}berb. und aktualisierte Aufl.},
  journal   = {Bautechnische Zahlentafeln : [jetzt mit neuer DIN 1052, DIN1053-1 und DIN 1054] / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... 31., vollst. {\"u}berb. und aktualisierte Aufl.},
  publisher = {Teubner [u.a.]},
  address   = {Stuttgart [u.a.]},
  isbn      = {3-519-55002-4},
  pages     = {603 -- 738},
  year      = {2004},
  language  = {de}
}
@article{Lohse2007,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Bautechnische Zahlentafeln / Wendehorst, Reinhard ; Wetzell, Otto W. [Hrsg.] 32., vollst. aktualisierte Aufl.},
  journal   = {Bautechnische Zahlentafeln / Wendehorst, Reinhard ; Wetzell, Otto W. [Hrsg.] 32., vollst. aktualisierte Aufl.},
  publisher = {Teubner},
  address   = {Stuttgart},
  isbn      = {978-3-8351-0055-8},
  pages     = {607 -- 757},
  year      = {2007},
  language  = {de}
}
@article{Lohse2007,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Wendehorst Beispiele aus der Baupraxis / Wetzell, Otto W. ; Baumgartner, Herwig ; Wendehorst, Reinhard [Hrsg.].},
  journal   = {Wendehorst Beispiele aus der Baupraxis / Wetzell, Otto W. ; Baumgartner, Herwig ; Wendehorst, Reinhard [Hrsg.].},
  publisher = {Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8351-0069-5},
  pages     = {129 -- 167},
  year      = {2007},
  language  = {de}
}
@article{WiezorekBaumann1999,
  author    = {Wiezorek, E. and Baumann, Marcus},
  title     = {Stadt{\"o}kologie in der Stadtplanung: der "Stadt{\"o}kologische Beitrag" Aachen},
  series = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  volume    = {21},
  journal   = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  number    = {97},
  issn      = {0172-1623},
  pages     = {28 -- 37},
  year      = {1999},
  language  = {de}
}
@article{GosslaReitbergerGaertner2003,
  author    = {Gossla, Ulrich and Reitberger, Robert and G{\"a}rtner, Bruno},
  title     = {Stadtbahn Dortmund - Herausforderungen im innerst{\"a}dtischen Tunnelbau},
  series = {Bauforschung und -praxis in schwierigen Zeiten / Braunschweiger Bauseminar 2003, 13. und 14. November. Wiss. Leitung: Horst Falkner ; Manfred Teutsch},
  journal   = {Bauforschung und -praxis in schwierigen Zeiten / Braunschweiger Bauseminar 2003, 13. und 14. November. Wiss. Leitung: Horst Falkner ; Manfred Teutsch},
  publisher = {IBMB, Bibliothek},
  address   = {Braunschweig},
  isbn      = {3-89288-150-2},
  pages     = {41 -- 50},
  year      = {2003},
  language  = {de}
}