@inproceedings{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ufer, Sebastian and Guenel, Ismet and Gach, Stefan},
  title     = {Voruntersuchungen mit Ansys CFX zu einer Druckstufe von einem Druckstufensystem f{\"u}r das Elektronenstrahlschweißen},
  series = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  booktitle = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2012, Saarbr{\"u}cken>},
  isbn      = {978-3-87155-593-0},
  pages     = {33 -- 35},
  year      = {2012},
  language  = {de}
}
@article{Wolf2012,
  author    = {Wolf, Martin},
  title     = {Von Security Awareness zum Secure Behaviour},
  series = {Hakin9 Extra - IT-Forensik},
  volume    = {2012},
  journal   = {Hakin9 Extra - IT-Forensik},
  number    = {5},
  publisher = {Software Wydawnictwo},
  address   = {Warszawa},
  issn      = {1733-7186},
  pages     = {18 -- 19},
  year      = {2012},
  abstract  = {Security Awareness ist derzeit ein viel diskutiertes Thema. Es reicht nicht, einfach nur ein paar technische Systeme (z.B. Firewalls) zu installieren, um ein angemessenes Schutzniveau zu erzielen. Neben einer guten Organisation von IT Security ist es auch notwendig, den Mitarbeiter einzubinden. Der vielzitierte "Faktor Mensch" ist derjenige, der die Technik korrekt anwenden muss und der durch falsches Verhalten technische und organisatorische Schutzmaßnahmen aushebeln kann. Deshalb reicht es nicht aus, wenn sich der Mitarbeiter der Gefahren bewusst ("aware") ist, er muss auch dementsprechend "sicher" handeln.},
  language  = {de}
}
@article{Lind2012,
  author    = {Lind, Thorsten Patric},
  title     = {Vollzug der Schenkung einer Unterbeteiligung : BGH, Urteil vom 29.11.2011 - II ZR 306/09 : Anmerkung},
  series = {Fachdienst Zivilrecht - LMK - Kommentierte BGH-Rechtsprechung, Lindenmaier-M{\"o}hring},
  journal   = {Fachdienst Zivilrecht - LMK - Kommentierte BGH-Rechtsprechung, Lindenmaier-M{\"o}hring},
  number    = {Ausg. 4},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {1611-1095},
  pages     = {330150},
  year      = {2012},
  language  = {de}
}
@book{DigelZhubanovaAkimbekov2012,
  author    = {Digel, Ilya and Zhubanova, Azhar Ahmetovna and Akimbekov, Nuraly Shardarbekovich},
  title     = {Visual Virology},
  address   = {Almaty},
  isbn      = {978-601-247-298-1},
  pages     = {144 S. : zahlr. Ill.},
  year      = {2012},
  language  = {en}
}
@book{FaboKurz2012,
  author    = {Fabo, Sabine and Kurz, Melanie},
  title     = {Vielen Dank f{\"u}r Ihren Einkauf: Konsumkultur aus Sicht von Design, Kunst und Medien / Sabine Fabo, Melanie Kurz (Hg.)},
  publisher = {transcript},
  address   = {Bielefeld},
  isbn      = {978-3-8394-2170-3},
  doi       = {10.14361/transcript.9783839421703},
  pages     = {184 Seiten ; Illustrationen, Diagramme},
  year      = {2012},
  abstract  = {Auch mit der j{\"u}ngsten Finanzkrise hat die Konsumkultur nichts von ihrer Bedeutung als massenkulturelles Ph{\"a}nomen eingeb{\"u}ßt. Im Gegenteil: Das aktuelle Krisenbewusstsein sucht Halt im Konsum, der seinen Verfechtern noch immer als Modell demokratischer Teilhabe an gesellschaftlicher Produktion gilt. Zugleich ist die Konsumkritik der 1960er Jahre in Richtung eines intelligenten und nachhaltigen Konsums weitergef{\"u}hrt worden, und selbstbewusste Konsumenten treten nun als emanzipierte »Prosumer« und Mitakteure des Marktes auf. Das Buch entwickelt aus Sicht von Design, Kunst, Soziologie, Marketing und Medien neue Perspektiven auf das Ph{\"a}nomen Konsum.},
  language  = {de}
}
@article{FissabreLohmann2012,
  author    = {Fissabre, Anke and Lohmann, Daniel},
  title     = {Verlust einer „tragenden Wand" : Das Haus der Jugend von Rudolf Schwarz in Aachen},
  series = {Bauwelt},
  volume    = {103},
  journal   = {Bauwelt},
  number    = {45},
  publisher = {Bauverlag BV},
  address   = {G{\"u}tersloh},
  issn      = {0005-6855},
  pages     = {6 -- 7},
  year      = {2012},
  language  = {de}
}
@inproceedings{LuszczynskiEngels2012,
  author    = {Luszczynski, K. and Engels, Elmar},
  title     = {Vergleichende Untersuchung zur Topologie von zelloptimalen, elektromobilit{\"a}ts-optimierten Ladungsausgleichsvorrichtungen},
  series = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  booktitle = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  publisher = {Oldenbourg Industrieverlag},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8356-3305-6},
  pages     = {165 -- 174},
  year      = {2012},
  language  = {de}
}
@misc{GollewskiLangeRingbecketal.2012,
  author    = {Gollewski, Torsten and Lange, Robert and Ringbeck, Thorsten and Hess, Holger and Buxbaum, Bernd},
  title     = {Verfahren und Vorrichtung zur Laufzeitsensitiven Messung eines Signals [Offenlegungsschrift / Europ{\"a}ische Patentschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt},
  address   = {M{\"u}nchen / Den Hague},
  year      = {2012},
  language  = {de}
}
@inproceedings{SchoeneReisgenSchleser2012,
  author    = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus},
  title     = {Verbundverhalten der polymeren Interphase in textibewehrtem Beton},
  series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)},
  booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Doktorandenseminar Klebtechnik <2, 2011, Dresden> ; Institut f{\"u}r Schweißtechnik und F{\"u}getechnik <Aachen>},
  isbn      = {978-3-87155-599-2},
  pages     = {50 -- 56},
  year      = {2012},
  language  = {de}
}
@article{Frings2012,
  author    = {Frings, Michael},
  title     = {Verbesserter Schutz vor Kostenfallen im elektronischen Gesch{\"a}ftsverkehr („Buttonl{\"o}sung") : Erster Schritt zur Umsetzung der neuen EU-Verbraucherrechterichtlinie},
  series = {NWB : NWB-Steuer- und Wirtschaftsrecht},
  volume    = {2012},
  journal   = {NWB : NWB-Steuer- und Wirtschaftsrecht},
  number    = {23},
  publisher = {NWB-Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {1912 -- 1918},
  year      = {2012},
  abstract  = {Der Deutsche Bundestag und Bundesrat haben am 2.3.2012 bzw. 30.3.2012 das Gesetz gegen Kostenfallen im Internet verabschiedet, das am 1.8.2012 in Kraft treten wird. Hiermit hat der deutsche Gesetzgeber einen ersten Schritt getan, um die neue EU-Verbraucherrechterichtlinie vom 25.10.2011 (2011/83/EU, ABl L 304/64) in nationales Recht umzusetzen. Mit dieser Umsetzung ist das dr{\"a}ngendste Problem der Kosten- und Abo-Fallen im elektronischen Gesch{\"a}ftsverkehr aus dem Gesamtpaket der Verbraucherrechterichtlinie herausgel{\"o}st und in dem neugefassten \S 312g BGB behandelt worden. Eile bei der Umsetzung war hier geboten, weil unseri{\"o}se Unternehmen im elektronischen Rechtsverkehr zunehmend und in großem Umfang gegen{\"u}ber ihren Kunden durch irref{\"u}hrende Gestaltungen ihrer Internetseiten verschleiern, dass die angebotenen Leistungen entgeltpflichtig sind.},
  language  = {de}
}
@article{YazdanbakhshSolbachBitz2012,
  author    = {Yazdanbakhsh, Pedram and Solbach, Klaus and Bitz, Andreas},
  title     = {Variable power combiner for RF mode shimming in 7-T MR imaging},
  series = {IEEE Transaction on Biomedical Engineering},
  volume    = {59},
  journal   = {IEEE Transaction on Biomedical Engineering},
  number    = {9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {1558-2531},
  doi       = {10.1109/TBME.2012.2205926},
  pages     = {2549 -- 2557},
  year      = {2012},
  abstract  = {This contribution discusses the utilization of RF power in an MRI system with RF mode shimming which enables the superposition of circularly polarized modes of a transmit RF coil array driven by a Butler matrix. Since the required power for the individual modes can vary widely, mode-shimming can result in a significant underutilization of the total available RF power. A variable power combiner (VPC) is proposed to improve the power utilization: it can be realized as a reconfiguration of the MRI transmit system by the inclusion of one additional matrix network which receives the power from all transmit amplifiers at its input ports and provides any desired (combined) power distribution at its output ports by controlling the phase and amplitude of the amplifiers' input signals. The power distribution at the output ports of the VPC is then fed into the "mode" ports of the coil array Butler matrix in order to superimpose the spatial modes at the highest achievable power utilization. The VPC configuration is compared to the standard configuration of the transmit chain of our MRI system with 8 transmit channels and 16 coils. In realistic scenarios, improved power utilization was achieved from 17\% to 60\% and from 14\% to 55\% for an elliptical phantom and a region of interest in the abdomen, respectively, and an increase of the power utilization of 1 dB for a region of interest in the upper leg. In general, it is found that the VPC allows significant improvement in power utilization when the shimming solution demands only a few modes to be energized, while the technique can yield loss in power utilization in cases with many modes required at high power level.},
  language  = {en}
}
@article{Huening2012,
  author    = {H{\"u}ning, Felix},
  title     = {Using Trench PowerMOSFETs in Linear Mode},
  series = {Power Electronics Europe (2012)},
  journal   = {Power Electronics Europe (2012)},
  publisher = {DFA Media},
  address   = {Tonbridge},
  issn      = {1748-3530},
  pages     = {27 -- 29},
  year      = {2012},
  abstract  = {If we think about applications for modern Power MOSFETs using trench technology, running them in linear mode may not be top of the priority list. Yet there are multiple uses for Trench Power MOSFETs in linear mode. In fact, even turning the device on and off in switching applications is a form of linear operation. Also, these components can be run in linear mode to protect the device against voltage surges. This article will illustrate the factors that need to be considered for linear operation and show how Trench Power MOSFETs are suited to it.},
  language  = {en}
}
@inproceedings{BungSunMeirelesetal.2012,
  author    = {Bung, Daniel B. and Sun, Q. and Meireles, I. and Matos, J. and Viseu, T.},
  title     = {USBR type III stilling basin performance for steep stepped spillways},
  series = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  booktitle = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  organization    = {International Symposium on Hydraulic Structures <4, 2012, Porto>},
  isbn      = {978-989-8509-01-7},
  pages     = {Elektronisch publiziert},
  year      = {2012},
  language  = {en}
}
@inproceedings{FuchsRitzStrauch2012,
  author    = {Fuchs, Britta and Ritz, Thomas and Strauch, Jakob},
  title     = {Usability of mobile applications : dissemination of usability engineering in small and medium enterprises},
  series = {Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]},
  booktitle = {Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]},
  editor    = {Obaidat, Mohammad S.},
  publisher = {SciTePress},
  address   = {[Lissabon]},
  isbn      = {978-989-8565-23-5},
  pages     = {272 -- 277},
  year      = {2012},
  language  = {en}
}
@inproceedings{ScheikReisgenSchleseretal.2012,
  author    = {Scheik, Sven and Reisgen, Uwe and Schleser, Markus and Huber, Frederic},
  title     = {Untersuchungen zum dehnungsbasierten Versagen von geklebten, oberfl{\"a}chenveredelten Blechen im Zugscherversuch},
  series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011},
  booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Institut f{\"u}r Schweißtechnik und F{\"u}getechnik Aachen> ; Doktorandenseminar Klebtechnik <2, 2011, Dresden>},
  isbn      = {978-3-87155-599-2},
  pages     = {73 -- 78},
  year      = {2012},
  language  = {de}
}
@inproceedings{ScheikReisgenSchleseretal.2012,
  author    = {Scheik, Sven and Reisgen, Uwe and Schleser, Markus and Huber, Frederic},
  title     = {Untersuchungen zum dehnungsbasierten Versagen von geklebten, oberfl{\"a}chenveredelten Blechen im Zugscherversuch},
  series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)},
  booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  organization    = {Doktorandenseminar Klebtechnik <2, 2011, Dresden> ; Institut f{\"u}r Schweißtechnik und F{\"u}getechnik <Aachen>},
  isbn      = {978-3-87155-599-2},
  pages     = {73 -- 78},
  year      = {2012},
  language  = {de}
}
@inproceedings{EngelsGabler2012,
  author    = {Engels, Elmar and Gabler, T.},
  title     = {Universelle Programmierschnittstelle f{\"u}r Motion-Logic Systeme},
  series = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  booktitle = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz},
  publisher = {Oldenbourg Industrieverlag},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8356-3305-6},
  pages     = {37 -- 46},
  year      = {2012},
  language  = {de}
}
@article{PaulssenNgyugenKahlckeetal.2012,
  author    = {Paulßen, Elisabeth and Ngyugen, Hung Huy and Kahlcke, Nils and Deflon, Victor M. and Abram, Ulrich},
  title     = {Tricarbonyltechnetium(I) and -rhenium(I) complexes with N′-thiocarbamoylpicolylbenzamidines},
  series = {Polyhedron},
  volume    = {40},
  journal   = {Polyhedron},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0277-5387},
  doi       = {10.1016/j.poly.2012.04.008},
  pages     = {153 -- 158},
  year      = {2012},
  abstract  = {N,N-Dialkylamino(thiocarbonyl)-N′-picolylbenzamidines react with (NEt4)2[M(CO)3X3] (M = Re, X = Br; M = Tc, X = Cl) under formation of neutral [M(CO)3L] complexes in high yields. The monoanionic NNS ligands bind in a facial coordination mode and can readily be modified at the (CS)NR1R2 moiety. The complexes [99Tc(CO)3(LPyMor)] and [Re(CO)3(L)] (L = LPyMor, LPyEt) were characterized by X-ray diffraction. Reactions of [99mTc(CO)3(H2O)3]+ with the N′-thiocarbamoylpicolylbenzamidines give the corresponding 99mTc complexes. The ester group in HLPyCOOEt allows linkage between biomolecules and the metal core.},
  language  = {en}
}
@article{EilmannRigling2012,
  author    = {Eilmann, Britta and Rigling, Andreas},
  title     = {Tree-growth analyses to estimate tree species' drought tolerance},
  series = {Tree Physiology},
  volume    = {32},
  journal   = {Tree Physiology},
  number    = {2},
  editor    = {Abrams, Marc},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {0829-318X (Print)},
  doi       = {10.1093/treephys/tps004},
  pages     = {178 -- 187},
  year      = {2012},
  abstract  = {Climate change is challenging forestry management and practices. Among other things, tree species with the ability to cope with more extreme climate conditions have to be identified. However, while environmental factors may severely limit tree growth or even cause tree death, assessing a tree species' potential for surviving future aggravated environmental conditions is rather demanding. The aim of this study was to find a tree-ring-based method suitable for identifying very drought-tolerant species, particularly potential substitute species for Scots pine (Pinus sylvestris L.) in Valais. In this inner-Alpine valley, Scots pine used to be the dominating species for dry forests, but today it suffers from high drought-induced mortality. We investigate the growth response of two native tree species, Scots pine and European larch (Larix decidua Mill.), and two non-native species, black pine (Pinus nigra Arnold) and Douglas fir (Pseudotsuga menziesii Mirb. var. menziesii), to drought. This involved analysing how the radial increment of these species responded to increasing water shortage (abandonment of irrigation) and to increasingly frequent drought years. Black pine and Douglas fir are able to cope with drought better than Scots pine and larch, as they show relatively high radial growth even after irrigation has been stopped and a plastic growth response to drought years. European larch does not seem to be able to cope with these dry conditions as it lacks the ability to recover from drought years. The analysis of trees' short-term response to extreme climate events seems to be the most promising and suitable method for detecting how tolerant a tree species is towards drought. However, combining all the methods used in this study provides a complete picture of how water shortage could limit species.},
  language  = {en}
}
@inproceedings{CzarneckiWinkelmannSpiliopoulou2012,
  author    = {Czarnecki, Christian and Winkelmann, Axel and Spiliopoulou, Myra},
  title     = {Transformation in Telecommunication - Analyse und Clustering von Real-life Projekten},
  series = {Multikonferenz Wirtschaftsinformatik 2012},
  booktitle = {Multikonferenz Wirtschaftsinformatik 2012},
  editor    = {Mattfeld, Dirk Christian and Robra-Bissantz, Susanne},
  publisher = {Gito},
  address   = {Berlin},
  isbn      = {9783942183635},
  pages     = {985 -- 998},
  year      = {2012},
  abstract  = {Die Ver{\"a}nderungen des Telekommunikationsmarktes haben in der Praxis zu einer Vielzahl von Transformationsprojekten gef{\"u}hrt. Was geh{\"o}rt aber zu einem "Transformationsprojekt", welche Prozesse und Systeme werden ver{\"a}ndert? Zur Beantwortung dieser Frage haben wir 184 Berichte zu Projekten analysiert, die als "Transformationsprojekte" bezeichnet waren. F{\"u}r die Analyse haben wir einen Kodierungsrahmen konzipiert und anhand dessen die Berichte mit einem hierarchischen Clustering-Verfahren in Themen gruppiert. Die Ergebnisse liefern Hinweise {\"u}ber die in der Praxis gesetzten Schwerpunkte und Priorit{\"a}ten. Sie k{\"o}nnen somit als Unterst{\"u}tzung f{\"u}r Unternehmen dienen, die ein Transformationsprojekt planen. Sie weisen zudem darauf hin, in welchen Bereichen eines Unternehmens Unterst{\"u}tzung durch wissenschaftlich erprobte Werkzeuge und Modelle n{\"o}tig ist.},
  language  = {de}
}
@inproceedings{FerreinKallweitLautermann2012,
  author    = {Ferrein, Alexander and Kallweit, Stephan and Lautermann, Mark},
  title     = {Towards an autonomous pilot system for a tunnel boring machine},
  series = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  booktitle = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4673-5183-6},
  year      = {2012},
  language  = {en}
}
@inproceedings{BohrnStuetzFleischeretal.2012,
  author    = {Bohrn, U. and St{\"u}tz, E. and Fleischer, M. and Sch{\"o}ning, Michael Josef and Wagner, P.},
  title     = {Towards a paradigm change - mammalian cells as sensitive biosensor layers for the detection of unexpected toxic substances in air},
  series = {Nanoscale Science and Technology (NS\&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012},
  booktitle = {Nanoscale Science and Technology (NS\&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012},
  editor    = {Abdelghani, Adnane and Sch{\"o}ning, Michael Josef},
  pages     = {44 -- 44},
  year      = {2012},
  language  = {en}
}
@article{FischerKowalskiPudasaini2012,
  author    = {Fischer, Jan-Thomas and Kowalski, Julia and Pudasaini, Shiva P.},
  title     = {Topographic curvature effects in applied avalanche modelling},
  series = {Cold Regions Science and Technology},
  volume    = {74-75},
  journal   = {Cold Regions Science and Technology},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7441},
  doi       = {10.1016/j.coldregions.2012.01.005},
  pages     = {21 -- 30},
  year      = {2012},
  abstract  = {This paper describes the implementation of topographic curvature effects within the RApid Mass MovementS (RAMMS) snow avalanche simulation toolbox. RAMMS is based on a model similar to shallow water equations with a Coulomb friction relation and the velocity dependent Voellmy drag. It is used for snow avalanche risk assessment in Switzerland. The snow avalanche simulation relies on back calculation of observed avalanches. The calibration of the friction parameters depends on characteristics of the avalanche track. The topographic curvature terms are not yet included in the above mentioned classical model. Here, we fundamentally improve this model by mathematically and physically including the topographic curvature effects. By decomposing the velocity dependent friction into a topography dependent term that accounts for a curvature enhancement in the Coulomb friction, and a topography independent contribution similar to the classical Voellmy drag, we construct a general curvature dependent frictional resistance, and thus propose new extended model equations. With three site-specific examples, we compare the apparent frictional resistance of the new approach, which includes topographic curvature effects, to the classical one. Our simulation results demonstrate substantial effects of the curvature on the flow dynamics e.g., the dynamic pressure distribution along the slope. The comparison of resistance coefficients between the two models demonstrates that the physically based extension presents an improvement to the classical approach. Furthermore a practical example highlights its influence on the pressure outline in the run out zone of the avalanche. Snow avalanche dynamics modeling natural terrain curvature centrifugal force friction coefficients.},
  language  = {en}
}
@article{OrzadaMaderwaldPoseretal.2012,
  author    = {Orzada, S. and Maderwald, S. and Poser, B. A. and Johst, S. and Kannengiesser, S. and Ladd, M. E. and Bitz, Andreas},
  title     = {Time-interleaved acquisition of modes: an analysis of SAR and image contrast implications},
  series = {Magnetic Resonance in Medicine},
  volume    = {67},
  journal   = {Magnetic Resonance in Medicine},
  number    = {4},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.23081},
  pages     = {1033 -- 1041},
  year      = {2012},
  abstract  = {s the magnetic field strength and therefore the operational frequency in MRI are increased, the radiofrequency wavelength approaches the size of the human head/body, resulting in wave effects which cause signal decreases and dropouts. Especially, whole-body imaging at 7 T and higher is therefore challenging. Recently, an acquisition scheme called time-interleaved acquisition of modes has been proposed to tackle the inhomogeneity problems in high-field MRI. The basic premise is to excite two (or more) different Burn:x-wiley:07403194:media:MRM23081:tex2gif-stack-1 modes using static radiofrequency shimming in an interleaved acquisition, where the complementary radiofrequency patterns of the two modes can be exploited to improve overall signal homogeneity. In this work, the impact of time-interleaved acquisition of mode on image contrast as well as on time-averaged specific absorption rate is addressed in detail. Time-interleaved acquisition of mode is superior in Burn:x-wiley:07403194:media:MRM23081:tex2gif-stack-2 homogeneity compared with conventional radiofrequency shimming while being highly specific absorption rate efficient. Time-interleaved acquisition of modes can enable almost homogeneous high-field imaging throughout the entire field of view in PD, T2, and T2*-weighted imaging and, if a specified homogeneity criterion is met, in T1-weighted imaging as well.},
  language  = {en}
}
@article{ScheikSchleserReisgen2012,
  author    = {Scheik, Sven and Schleser, Markus and Reisgen, Uwe},
  title     = {Thermisches Direktf{\"u}gen von Metall und Kusntstoff: eine Alternative zur Klebtechnik},
  series = {Adh{\"a}sion : Kleben \& Dichten},
  volume    = {56},
  journal   = {Adh{\"a}sion : Kleben \& Dichten},
  number    = {11},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0001-8198 (E-Journal); 0001-8198 (Print)},
  doi       = {10.1007/s35145-012-0005-x},
  pages     = {36 -- 40},
  year      = {2012},
  abstract  = {Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder" der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktf{\"u}gen, das eine stoffschl{\"u}ssige Verbindung zwischen Kunststoff und Metall erm{\"o}glicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.},
  language  = {de}
}
@article{StadlerGarveyBocahutetal.2012,
  author    = {Stadler, Andreas M. and Garvey, G. J. and Bocahut, A. and Sacquin-Mora, S. and Digel, Ilya and Schneider, G. J. and Natali, F. and Artmann, Gerhard and Zaccai, G.},
  title     = {Thermal fluctuations of haemoglobin from different species : adaptation to temperature via conformational dynamics},
  series = {Journal of the Royal Society Interface},
  volume    = {9},
  journal   = {Journal of the Royal Society Interface},
  number    = {76},
  publisher = {The Royal Society},
  address   = {London},
  issn      = {1742-5689},
  doi       = {10.1098/rsif.2012.0364},
  pages     = {2845 -- 2855},
  year      = {2012},
  abstract  = {Thermodynamic stability, configurational motions and internal forces of haemoglobin (Hb) of three endotherms (platypus, Ornithorhynchus anatinus; domestic chicken, Gallus gallus domesticus and human, Homo sapiens) and an ectotherm (salt water crocodile, Crocodylus porosus) were investigated using circular dichroism, incoherent elastic neutron scattering and coarse-grained Brownian dynamics simulations. The experimental results from Hb solutions revealed a direct correlation between protein resilience, melting temperature and average body temperature of the different species on the 0.1 ns time scale. Molecular forces appeared to be adapted to permit conformational fluctuations with a root mean square displacement close to 1.2 {\AA} at the corresponding average body temperature of the endotherms. Strong forces within crocodile Hb maintain the amplitudes of motion within a narrow limit over the entire temperature range in which the animal lives. In fully hydrated powder samples of human and chicken, Hb mean square displacements and effective force constants on the 1 ns time scale showed no differences over the whole temperature range from 10 to 300 K, in contrast to the solution case. A complementary result of the study, therefore, is that one hydration layer is not sufficient to activate all conformational fluctuations of Hb in the pico- to nanosecond time scale which might be relevant for biological function. Coarse-grained Brownian dynamics simulations permitted to explore residue-specific effects. They indicated that temperature sensing of human and chicken Hb occurs mainly at residues lining internal cavities in the β-subunits.},
  language  = {en}
}
@inproceedings{Wollert2012,
  author    = {Wollert, J{\"o}rg},
  title     = {The performance of UWB-communication in an industrial environment},
  series = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012},
  booktitle = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Symposium on Wireless Systems <1, 2012, Offenburg>},
  isbn      = {978-1-4673-4678-8},
  doi       = {10.1109/IDAACS-SWS.2012.6377639},
  pages     = {85 -- 90},
  year      = {2012},
  language  = {en}
}
@inproceedings{KnackstedtEggertFleischer2012,
  author    = {Knackstedt, Ralf and Eggert, Mathias and Fleischer, Stefan},
  title     = {The Legal Perspective on Business to Government Reporting - A Conceptual Modeling Approach and Its Application in the Financial Sector},
  series = {45th Hawaii International Conference on System Sciences 2012},
  booktitle = {45th Hawaii International Conference on System Sciences 2012},
  isbn      = {978-0-7695-4525-7},
  doi       = {10.1109/HICSS.2012.576},
  pages     = {2309 -- 2318},
  year      = {2012},
  language  = {en}
}
@phdthesis{Bragard2012,
  author    = {Bragard, Michael},
  title     = {The integrated emitter turn-off thyristor : an innovative MOS-gated high-power device. - (Aachener Beitr{\"a}ge des ISEA ; 62)},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8440-1152-4},
  pages     = {III, 164 S. : Ill., graph. Darst.},
  year      = {2012},
  abstract  = {This thesis introduces the Integrated Emitter Turn-Off (IETO) Thyristor as a new high-power device. Known state-of-the-art research activities like the Dual GCT, the ETO thyristor and the ICT were presented and critically reviewed. A comparison with commercialized solutions identifies the pros and cons of each type of device family. Based on this analysis, the IETO structure is proposed, covering most benefits of each device class. In particular the combination of a MOS-assisted turn-off with a thyristor-based device allows a voltage-controlled MOS switching and the low on-state voltage of the thyristors. The following synthesis of an IETO device stands on a three-dimensional field of optimization spanned by electric, mechanical and thermal aspects. From an electric point of view, the lowest possible parasitic inductance and resistance within the commutation path are optimization criteria. The mechanical construction has to withstand the required contact pressure of multiple kilo Newtons. Finally, thermal borders limit the maximum average current of the device. FEM simulations covering these three aspects are performed for several design proposals. An IETO prototype is constructed and measurements on various test benches attest thermal, mechanical and electric performance. A local decoupling of the external driver stage and the presspack housing is presented by a cable connection. This separation enables a thermal and mechanical independence, which is advantageous in terms of vibrations and thermal cycles including increased reliability. The electric pulse performance of the prototype device is a factor of 3.1 above today''s solutions. In single-pulse measurements, a current up to 1600 A was successfully turned off at 115°C with an active silicon area of 823 mm². One reason for this increased turn-off capability is the extremely low-inductive construction. Additional functionality of the IETO thyristor like over-current self-protection and defined short-circuit failure state are successfully verified.},
  language  = {en}
}
@phdthesis{KurulganDemirci2012,
  author    = {Kurulgan Demirci, Eylem},
  title     = {The effect of rhAPC on contractile tension : an in-vitro sepsis model of cardiomyocytes and endothelial cells},
  year      = {2012},
  language  = {en}
}
@article{NomdedeuWillenSchiefferetal.2012,
  author    = {Nomdedeu, Mar Monsonis and Willen, Christine and Schieffer, Andre and Arndt, Hartmut},
  title     = {Temperature-dependent ranges of coexistence in a model of a two-prey-one-predator microbial food web},
  series = {Marine Biology},
  volume    = {159},
  journal   = {Marine Biology},
  number    = {11},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1793},
  doi       = {10.1007/s00227-012-1966-x},
  pages     = {2423 -- 2430},
  year      = {2012},
  abstract  = {The objective of our study was to analyze the effects of temperature on the population dynamics of a three-species food web consisting of two prey bacteria (Pedobacter sp. and Acinetobacter johnsonii) and a protozoan predator (Tetrahymena pyriformis) as model organisms. We assessed the effects of temperature on the growth rates of all three species with the objective of developing a model with four differential equations based on the experimental data. The following hypotheses were tested at a theoretical level: Firstly, temperature changes can affect the dynamic behavior of a system by temperature-dependent parameters and interactions and secondly, food web response to temperature cannot be derived from the single species temperature response. The main outcome of the study is that temperature changes affect the parameter range where coexistence is possible within all three species. This has significant consequences on our ideas regarding the evaluation of effects of global warming.},
  language  = {en}
}
@book{Waehlisch2012,
  author    = {W{\"a}hlisch, Georg},
  title     = {Technisches Zeichnen : L{\"o}sungsvorschl{\"a}ge f{\"u}r das Selbststudium. (Berichte aus dem Maschinenbau)},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8440-1159-3},
  pages     = {[138] S. : zahlr. Ill., graph. Darst.},
  year      = {2012},
  language  = {de}
}
@article{ImmelGruetzkeSpaeteetal.2012,
  author    = {Immel, Timo and Gr{\"u}tzke, Martin and Sp{\"a}te, Anne-Katrin and Groth, Ulrich and {\"O}hlschl{\"a}ger, Peter and Huhn, Thomas},
  title     = {Synthesis and X-ray structure analysis of a heptacoordinate titanium(IV)-bis-chelate with enhanced in vivo antitumor efficacy},
  series = {Chemical Communications},
  volume    = {48},
  journal   = {Chemical Communications},
  number    = {46},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1364-548X},
  doi       = {10.1039/C2CC31624B},
  pages     = {5790 -- 5792},
  year      = {2012},
  abstract  = {Chelate stabilization of a titanium(IV)-salan alkoxide by ligand exchange with 2,6-pyridinedicarboxylic acid (dipic) resulted in heptacoordinate complex 3 which is not redox-active, stable on silica gel and has increased aqueous stability. 3 is highly toxic in HeLa S3 and Hep G2 and has enhanced antitumor efficacy in a mouse cervical-cancer model.},
  language  = {en}
}
@article{Grotendorst2012,
  author    = {Grotendorst, Johannes},
  title     = {Supercomputer programmieren - ein besonderes Studienangebot in J{\"u}lich},
  series = {Junge Wissenschaft. 27 (2012), H. 94},
  journal   = {Junge Wissenschaft. 27 (2012), H. 94},
  publisher = {-},
  isbn      = {0179-8529},
  pages     = {12 -- 14},
  year      = {2012},
  language  = {de}
}
@phdthesis{Schieffer2012,
  author    = {Schieffer, Andre},
  title     = {Studies on diversity and coexistence in an experimental microbial community},
  pages     = {76 Bl. : Ill.},
  year      = {2012},
  abstract  = {Biodiversity and the coexistence of species have puzzled and fascinated biologists since decades and is a hotspot in todays' natural sciences. Preserving this biodiversity is a great challenge as habitats and environments underlying tremendous changes like climate change and the loss of natural habitats, which are mainly due to anthropogenic influences. The coexistence of numerous species even in homogeneous environments is a stunning feature of natural communities and has been summarized under the term 'paradox of plankton'. Up to now, there are several mechanisms discussed, which may contribute to local and global diversity of organisms. Several interspecific trade offs have been identified maintaining the coexistence of species like their abilities regarding competition and predator avoidance, their capability to disperse in space and time, and their ability to exploit variable resources. Further, micro-evolutionary dynamics supporting the coexistence of species have been added to our knowledge, and deriving from theoretical deterministic models, non-linear dynamics which describe the temporal fluctuation of abundances of organisms. Whereas competition and predation seem to be clue structural elements within interacting organisms, the intrinsic dynamic behavior - by means of temporal changes in abundance - plays an important role regarding coexistence within a community. The present work sheds light on different factors affecting the coexistence of species using experimental microbial model systems consisting of a bacterivorous ciliate as the predator and two bacteria strains as prey organism. Additionally, another experimental setup consisting of two up to five bacteria species competing for one limiting resource was investigated. Highly controllable chemostat systems were established to exclude extrinsic disturbances. According to theoretical analyses I was able to show - experimentally and theoretically - that phenotypic plasticity of one species within a microbial one-predator-two-prey food web enlarges the range of possible coexistence of all species under different dynamic conditions, compared to a food web without phenotypic plasticity. This was accompanied by non-linear (chaotic) population dynamics within all experimental systems showing phenotypic plasticity. The experiments on the interplay of competition, predation and invasion showed that all aspects have an influence on species coexistence. Under undisturbed controlled conditions all aspects were analyzed in detail and in combination. Populations showed oscillations which were shown by quasi-chaotic attractors in phase space diagrams. Competition experiments with two up to five bacteria species competing for one limiting resource showed that all organisms were able to coexist which was mediated by species oscillations entering a regime of chaos. Besides that fact it was found, that the productivity (biomass) as well as the total cell numbers - under the same nutrition supply - increased by an increasing number of species in the experimental systems. Up to now, the occurrence of non-linear dynamics in well controlled experimental studies has been recognized several times and this phenomenon seemed to be more common in natural systems than generally assumed.},
  language  = {en}
}
@inproceedings{RitzStrauch2012,
  author    = {Ritz, Thomas and Strauch, Jakob},
  title     = {Strukturierte Ermittlung beeinflussender Faktoren f{\"u}r mobile Softwarel{\"o}sungen},
  series = {MMS 2012 : mobile und ubiquit{\"a}re Informationssysteme ; 7. Konferenz zur "Mobile und Ubiquit{\"a}re Informationssysteme" ; 01 - 02. M{\"a}rz 2012 in Braunschweig, Germany. - (GI-Edition lecture notes in informatics ; 202)},
  booktitle = {MMS 2012 : mobile und ubiquit{\"a}re Informationssysteme ; 7. Konferenz zur "Mobile und Ubiquit{\"a}re Informationssysteme" ; 01 - 02. M{\"a}rz 2012 in Braunschweig, Germany. - (GI-Edition lecture notes in informatics ; 202)},
  editor    = {Back, Andrea},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-296-3 (CD-ROM-Ausg.)},
  year      = {2012},
  language  = {de}
}
@article{Weigand2012,
  author    = {Weigand, Christoph},
  title     = {Statistical Tests Based on Reliability and Precision},
  series = {Economic Quality Control : EQC ; international journal for quality and reliability},
  volume    = {27},
  journal   = {Economic Quality Control : EQC ; international journal for quality and reliability},
  number    = {1},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {1869-6147},
  doi       = {10.1515/eqc-2012-0002},
  pages     = {43 -- 64},
  year      = {2012},
  abstract  = {The construction of a statistical test is investigated which is based only on "reliability" and "precision" as quality criteria. The reliability of a statistical test is quantifiedin a straightforward way by the probability that the decision of the test is correct. However, the quantification of the precision of a statistical test is not at all evident. Thereforethe paper presents and discusses several approaches. Moreover the distinction of "nullhypothesis" and "alternative hypothesis" is not necessary any longer.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Statistical modeling of laser welding of DP/TRIP steel sheets},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.05.025},
  pages     = {92 -- 101},
  year      = {2012},
  abstract  = {In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box-Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.},
  language  = {en}
}
@incollection{Vismann2012,
  author    = {Vismann, Ulrich},
  title     = {Stahlbetonbau},
  series = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0999-5 ; 978-3-8348-8229-5},
  doi       = {10.1007/978-3-8348-8229-5_9},
  pages     = {223 -- 262},
  year      = {2012},
  language  = {de}
}
@incollection{Vismann2012,
  author    = {Vismann, Ulrich},
  title     = {Stahlbeton- und Spannbetonbau nach Eurocode 2},
  series = {Wendehorst Bautechnische Zahlentafeln},
  booktitle = {Wendehorst Bautechnische Zahlentafeln},
  editor    = {Vismann, Ulrich},
  edition   = {34},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0960-5},
  doi       = {10.1007/978-3-8348-8613-2_12},
  pages     = {601 -- 775},
  year      = {2012},
  abstract  = {Die bauaufsichtliche Einf{\"u}hrung der Eurocodes steht unmittelbar bevor. F{\"u}r den Bereich des Stahl- und Spannbetonbaus soll die Anwendung zum 1. Juli 2012 verbindlich sein, d. h. mit diesem Stichtag sollte nur noch der Eurocode 2 (DIN EN 1992-1-1, Ausgabe Januar 2011) mit seinem zugeh{\"o}rigen nationalen Anhang (DIN EN 1992-1-1/NA, Ausgabe Januar 2011) Verwendung finden, die DIN 1045-1 wird zur{\"u}ckgezogen. Bereits seit M{\"a}rz 2010 gilt eine {\"U}bergangsphase, ist der die Anwendung des Eurocodes alternativ zur DIN 1045-1 als bauaufsichtlich gleichwertige L{\"o}sung m{\"o}glich.},
  language  = {de}
}
@incollection{LohseStroetmann2012,
  author    = {Lohse, Wolfram and Stroetmann, Richard},
  title     = {Stahlbau},
  series = {Wendehorst Bautechnische Zahlentafeln},
  booktitle = {Wendehorst Bautechnische Zahlentafeln},
  editor    = {Vismann, Ulrich},
  edition   = {34},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0960-5},
  doi       = {10.1007/978-3-8348-8613-2_13},
  pages     = {777 -- 1019},
  year      = {2012},
  language  = {de}
}
@incollection{StroetmannLohse2012,
  author    = {Stroetmann, Richard and Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0999-5 ; 978-3-8348-8229-5},
  doi       = {10.1007/978-3-8348-8229-5_10},
  pages     = {263 -- 361},
  year      = {2012},
  language  = {de}
}
@misc{SiegertMerkelHellmuthetal.2012,
  author    = {Siegert, Petra and Merkel, Marion and Hellmuth, Hendrik and O'Connell, Timothy and Maurer, Karl-Heinz},
  title     = {Stabilisierte fl{\"u}ssige enzymhaltige Tensidzubereitung (Einsatz einer das hydrolytische Enzym stabilisierenden Komponente, die eine Phenylalkyldicarbons{\"a}ure umfasst) [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt / WIPO},
  address   = {M{\"u}nchen / Den Hague / Genf},
  pages     = {1 -- 15},
  year      = {2012},
  language  = {de}
}
@misc{SiegertMerkelHellmuthetal.2012,
  author    = {Siegert, Petra and Merkel, Marion and Hellmuth, Hendrik and O'Connell, Timothy and Maurer, Karl-Heinz},
  title     = {Stabilisierte fl{\"u}ssige enzymhaltige Tensidzubereitung (Einsatz einer das hydrolytische Enzym stabilisierende Komponente, die eine Phthaloylglutamins{\"a}ure und/oder eine Phthaloylasparagins{\"a}ure umfasst) [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt / WIPO},
  address   = {M{\"u}nchen / Den Hague / Genf},
  pages     = {1 -- 16},
  year      = {2012},
  language  = {de}
}
@misc{SiegertMerkelHellmuthetal.2012,
  author    = {Siegert, Petra and Merkel, Marion and Hellmuth, Hendrik and O'Connell, Timothy and Maurer, Karl-Heinz},
  title     = {Stabilisierte fl{\"u}ssige enzymhaltige Tensidzubereitung (Einsatz einer das hydrolytische Enzym stabilisierende Komponente, die eine Oligoamino-biphenyl-oligocarbons{\"a}ure umfasst) [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt / WIPO},
  address   = {M{\"u}nchen / Den Hague / Genf},
  pages     = {1 -- 16},
  year      = {2012},
  language  = {de}
}
@misc{SiegertMerkelHellmuthetal.2012,
  author    = {Siegert, Petra and Merkel, Marion and Hellmuth, Hendrik and O'Connell, Timothy and Maurer, Karl-Heinz},
  title     = {Stabilisierte fl{\"u}ssige enzymhaltige Tensidzubereitung (Einsatz einer das hydrolytische Enzym stabilisierende Komponente, die eine Aminophthals{\"a}ure umfasst) [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt / WIPO},
  address   = {M{\"u}nchen / Den Hague / Genf},
  pages     = {1 -- 16},
  year      = {2012},
  language  = {de}
}
@misc{SiegertMerkelHellmuthetal.2012,
  author    = {Siegert, Petra and Merkel, Marion and Hellmuth, Hendrik and O'Connell, Timothy and Maurer, Karl-Heinz},
  title     = {Stabilisierte fl{\"u}ssige enzymhaltige Tensidzubereitung (Einsatz einer das hydrolytische Enzym stabilisierende Komponente, die ein Monosaccharidglycerat umfasst) [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt / WIPO},
  address   = {M{\"u}nchen / Den Hague / Genf},
  pages     = {1 -- 17},
  year      = {2012},
  language  = {de}
}
@misc{SiegertMerkelHellmuthetal.2012,
  author    = {Siegert, Petra and Merkel, Marion and Hellmuth, Hendrik and O'Connell, Timothy and Maurer, Karl-Heinz},
  title     = {Stabilisierte fl{\"u}ssige enzymhaltige Tensidzubereitung (durch den Einsatz einer das hydrolytische Enzym stabilisierende Komponente, die eine mehrfach substituierte Benzolcarbons{\"a}ure umfasst, die an mindestens zwei Kohlenstoffatomen des Benzolrestes eine Carboxylgruppe aufweist) [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt / WIPO},
  address   = {M{\"u}nchen / Den Hague / Genf},
  pages     = {1 -- 16},
  year      = {2012},
  language  = {de}
}
@book{BlassUibel2012,
  author    = {Blaß, Hans Joachim and Uibel, Thomas},
  title     = {Spaltversagen von Holz in mehrreihigen Verbindungen : Erweiterung des Rechen-modells f{\"u}r die Rissbildung beim Eindrehen von Holzschrauben},
  publisher = {KIT Scientific Publishing},
  address   = {Karlsruhe},
  isbn      = {978-3-86644-852-0},
  pages     = {VIII, 166 S. : Ill., graph. Darst.},
  year      = {2012},
  language  = {de}
}
@book{Uibel2012,
  author    = {Uibel, Thomas},
  title     = {Spaltverhalten von Holz beim Eindrehen von selbstbohrenden Holzschrauben},
  publisher = {KIT Scientific Publishing},
  address   = {Karlsruhe},
  isbn      = {978-3-86644-835-3},
  pages     = {290 S. : Ill., graph. Darst.},
  year      = {2012},
  language  = {de}
}