@article{Starke2002,
  author    = {Starke, G{\"u}nther},
  title     = {Integriertes Fertigungskonzept zum automatisierten Reparaturschweißen mit Robotern},
  series = {DVS-Berichte. 217 (2002)},
  journal   = {DVS-Berichte. 217 (2002)},
  isbn      = {0418-9639},
  pages     = {10 -- 13},
  year      = {2002},
  language  = {de}
}
@article{StarkeHackel2004,
  author    = {Starke, G{\"u}nther and Hackel, Matthias},
  title     = {Integrierte Oberfl{\"a}chendigitalisierung f{\"u}r die flexible Automatisierung bei kleinen Losgr{\"o}ßen},
  series = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.]},
  journal   = {Mechatronics \& robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE ...]. Drews, Paul [ed.]},
  publisher = {Eysoldt},
  address   = {Aachen},
  isbn      = {3-938153-30-X},
  pages     = {271 -- 275},
  year      = {2004},
  language  = {de}
}
@article{Knepper1984,
  author    = {Knepper, Ludger},
  title     = {Integrierte Hochregallager als materialflusstechnische Knotenpunkte moderner Produktions- und Umschlaganlagen},
  pages     = {93 -- 100},
  year      = {1984},
  language  = {de}
}
@article{Knepper1984,
  author    = {Knepper, Ludger},
  title     = {Integrierte Hochregallager als materialflusstechnische Knotenpunkte moderner Produktions- und Umschlaganlagen},
  series = {Deutsche Hebe- und Foerdertechnik. 30 (1984), H. 12},
  journal   = {Deutsche Hebe- und Foerdertechnik. 30 (1984), H. 12},
  isbn      = {0012-0278},
  pages     = {88 -- 93},
  year      = {1984},
  language  = {de}
}
@article{GlowaniaGriesSchoeneetal.2011,
  author    = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative coating technology for textile reinforcements of concrete applications},
  series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  journal   = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  organization    = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>},
  isbn      = {978-3-03785-008-4},
  issn      = {1013-9826 (E-Journal) ; 0252-1059 (Print)},
  pages     = {167 -- 173},
  year      = {2011},
  language  = {en}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative approach of joining hybrid components},
  series = {Journal of laser applications},
  volume    = {Vol. 23},
  journal   = {Journal of laser applications},
  number    = {Iss. 3},
  publisher = {Laser Institute of America},
  address   = {Orlando, Fla.},
  issn      = {1042-346X},
  pages     = {32007},
  year      = {2011},
  language  = {en}
}
@article{KlockeLenk1993,
  author    = {Klocke, Martina and Lenk, Antje},
  title     = {Innovationstransfer auf der Basis von Akzeptanz und Zusammenarbeit / Lenk, Antje ; Klocke, Martina},
  series = {Berufsbildung in Wissenschaft und Praxis. BWP. 22 (1993), H. 5},
  journal   = {Berufsbildung in Wissenschaft und Praxis. BWP. 22 (1993), H. 5},
  isbn      = {0341-4515},
  pages     = {43 -- 45},
  year      = {1993},
  language  = {de}
}
@article{GebhardtPflug1995,
  author    = {Gebhardt, Andreas and Pflug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping. Teil I},
  series = {CAD-CAM Report. 14 (1995), H. 7},
  journal   = {CAD-CAM Report. 14 (1995), H. 7},
  isbn      = {0930-7117},
  pages     = {56 -- 65},
  year      = {1995},
  language  = {de}
}
@article{GebhardtPlug1995,
  author    = {Gebhardt, Andreas and Plug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping, Teil II},
  series = {CAD-CAM Report. 14 (1995), H. 9},
  journal   = {CAD-CAM Report. 14 (1995), H. 9},
  isbn      = {0930-7117},
  pages     = {78 -- 85},
  year      = {1995},
  language  = {de}
}
@article{Schmitt2005,
  author    = {Schmitt, Rolf W.},
  title     = {Innovationen bei Schmierstoffen und tribologischen Systemen},
  series = {Stahl und Eisen. 125 (2005), H. 3},
  journal   = {Stahl und Eisen. 125 (2005), H. 3},
  isbn      = {0340-4803},
  pages     = {51 -- 53},
  year      = {2005},
  language  = {de}
}
@article{Raatschen2003,
  author    = {Raatschen, Hans-J{\"u}rgen},
  title     = {Ingenieurstudium Hundert Jahre : von der K{\"o}niglichen H{\"o}heren Maschinenbauschule Aachen zu den Ingenieurfachbereichen der Fachhochschule},
  series = {Fachblatt},
  volume    = {2003},
  journal   = {Fachblatt},
  number    = {1},
  organization    = {FH Aachen, University of Applied Sciences},
  pages     = {28 -- 29},
  year      = {2003},
  language  = {de}
}
@article{Klocke2003,
  author    = {Klocke, Martina},
  title     = {Ingenieurinnen dringend gesucht},
  series = {Von der Dampfmaschine zur Brennstoffzelle : 100 Jahre Ingenieurausbildung in Kiel / [Hrsg. Fachhochschule Kiel. Red. Martina Klocke]},
  journal   = {Von der Dampfmaschine zur Brennstoffzelle : 100 Jahre Ingenieurausbildung in Kiel / [Hrsg. Fachhochschule Kiel. Red. Martina Klocke]},
  publisher = {Fachhochschule},
  address   = {Kiel},
  pages     = {52 -- 55},
  year      = {2003},
  language  = {de}
}
@article{Wollert2016,
  author    = {Wollert, J{\"o}rg},
  title     = {Industrial Internet of Things : Seifenblase oder Revolution},
  series = {Elektronik},
  journal   = {Elektronik},
  number    = {7},
  publisher = {WEKA-Fachmedien},
  address   = {M{\"u}nchen},
  issn      = {0013-5658},
  pages     = {39 -- 45},
  year      = {2016},
  language  = {de}
}
@article{CosmaKesslerGebhardtetal.2020,
  author    = {Cosma, Cosmin and Kessler, Julia and Gebhardt, Andreas and Campbell, Ian and Balc, Nicolae},
  title     = {Improving the Mechanical Strength of Dental Applications and Lattice Structures SLM Processed},
  series = {Materials},
  volume    = {13},
  journal   = {Materials},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1944},
  doi       = {10.3390/ma13040905},
  pages     = {1 -- 18},
  year      = {2020},
  abstract  = {To manufacture custom medical parts or scaffolds with reduced defects and high mechanical characteristics, new research on optimizing the selective laser melting (SLM) parameters are needed. In this work, a biocompatible powder, 316L stainless steel, is characterized to understand the particle size, distribution, shape and flowability. Examination revealed that the 316L particles are smooth, nearly spherical, their mean diameter is 39.09 μm and just 10\% of them hold a diameter less than 21.18 μm. SLM parameters under consideration include laser power up to 200 W, 250-1500 mm/s scanning speed, 80 μm hatch spacing, 35 μm layer thickness and a preheated platform. The effect of these on processability is evaluated. More than 100 samples are SLM-manufactured with different process parameters. The tensile results show that is possible to raise the ultimate tensile strength up to 840 MPa, adapting the SLM parameters for a stable processability, avoiding the technological defects caused by residual stress. Correlating with other recent studies on SLM technology, the tensile strength is 20\% improved. To validate the SLM parameters and conditions established, complex bioengineering applications such as dental bridges and macro-porous grafts are SLM-processed, demonstrating the potential to manufacture medical products with increased mechanical resistance made of 316L.},
  language  = {en}
}
@article{GebhardtHoetterZiebura2014,
  author    = {Gebhardt, Andreas and H{\"o}tter, Jan-Steffen and Ziebura, Dawid},
  title     = {Impact of SLM build parameters on the surface quality},
  series = {RTejournal - Forum f{\"u}r Rapid Technologien},
  volume    = {11 (2014)},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologien},
  number    = {1},
  issn      = {1614-0923},
  pages     = {1 -- 14},
  year      = {2014},
  language  = {de}
}
@article{KallweitHelbingOrglmeisteretal.1994,
  author    = {Kallweit, Stephan and Helbing, M. and Orglmeister, R. and Siekmann, H. E.},
  title     = {Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J.},
  series = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  journal   = {FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Lab{\`e}ge / CERT/ONERA. General chairman Patrick Hebrard},
  address   = {Toulouse},
  pages     = {87 -- 94},
  year      = {1994},
  language  = {en}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Im Sog des Standards : Windows CE als Betriebssystem f{\"u}r Embedded Controller},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 47},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 9},
  issn      = {0013-5658},
  pages     = {40 -- 51},
  year      = {1998},
  language  = {de}
}
@article{Knepper1981,
  author    = {Knepper, Ludger},
  title     = {Im neuen Lufthansa-Frachtterminal: vom Hochregallager direkt ins Flugzeug},
  series = {Foerdermittel Journal. Kennzifferzeitschrift fuer Materialfluss, Lager und Transport. 13 (1981), H. 7/8},
  journal   = {Foerdermittel Journal. Kennzifferzeitschrift fuer Materialfluss, Lager und Transport. 13 (1981), H. 7/8},
  isbn      = {0013-5674},
  pages     = {22 -- 24},
  year      = {1981},
  language  = {de}
}
@article{Gebhardt1989,
  author    = {Gebhardt, Andreas},
  title     = {H{\"a}rten von Kurbelwellen},
  pages     = {1 -- 14},
  year      = {1989},
  language  = {de}
}
@article{Gebhardt2008,
  author    = {Gebhardt, Andreas},
  title     = {Hype um Generative Verfahren. Generative Verfahren zur Herstellung von Kleinserien durchlaufen die Phase eines Booms},
  series = {Economic Engineering (2008)},
  journal   = {Economic Engineering (2008)},
  isbn      = {1436-3348},
  pages     = {76 -- 79},
  year      = {2008},
  language  = {de}
}
@article{UlmerBraunChengetal.2020,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Human-Centered Gamification Framework for Manufacturing Systems},
  series = {Procedia CIRP},
  volume    = {93},
  journal   = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2020.04.076},
  pages     = {670 -- 675},
  year      = {2020},
  abstract  = {While bringing new opportunities, the Industry 4.0 movement also imposes new challenges to the manufacturing industry and all its stakeholders. In this competitive environment, a skilled and engaged workforce is a key to success. Gamification can generate valuable feedbacks for improving employees' engagement and performance. Currently, Gamification in workspaces focuses on computer-based assignments and training, while tasks that require manual labor are rarely considered. This research provides an overview of Enterprise Gamification approaches and evaluates the challenges. Based on that, a skill-based Gamification framework for manual tasks is proposed, and a case study in the Industry 4.0 model factory is shown.},
  language  = {en}
}
@article{Knepper1985,
  author    = {Knepper, Ludger},
  title     = {Hochregallager fuer Luftfracht - 365 Tage pro Jahr in Betrieb},
  series = {Foerdern und Heben. 35 (1985), H. 5},
  journal   = {Foerdern und Heben. 35 (1985), H. 5},
  isbn      = {0341-2636},
  pages     = {363 -- 366},
  year      = {1985},
  language  = {de}
}
@article{KallweitKisifeUtzenradetal.2008,
  author    = {Kallweit, Stephan and Kisife, F. and Utzenrad, M. and Weber, J.},
  title     = {Hispeed Scanning Stereo PIV hinter einer k{\"u}nstlichen Herzklappe / Kallweit, S. ; Kisife, F. ; Utzenrad, M. ; Weber, J.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik : 16. Fachtagung, 9. - 11. September 2008, Karlsruhe / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg.: B. Ruck},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik : 16. Fachtagung, 9. - 11. September 2008, Karlsruhe / veranst. von der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie GALA e.V. Hrsg.: B. Ruck},
  publisher = {GALA e.V.},
  address   = {Karlsruhe},
  isbn      = {978-3-9805613-4-1},
  pages     = {29},
  year      = {2008},
  language  = {de}
}
@article{KlockeLenk1993,
  author    = {Klocke, Martina and Lenk, A.},
  title     = {Hilfe zur Selbsthilfe},
  series = {Lernfeld Betrieb (1993)},
  journal   = {Lernfeld Betrieb (1993)},
  isbn      = {0930-4460},
  pages     = {26 -- 27},
  year      = {1993},
  language  = {de}
}
@article{KallweitKaminskyCanneytetal.2007,
  author    = {Kallweit, Stephan and Kaminsky, R. and Canneyt, C. van and Eloot, S.},
  title     = {High-Speed und Stereo-PIV in einem k{\"u}nstlichen Blutgef{\"a}ß / Kallweit, S. ; Kaminsky, R. ; Canneyt, C. van ; Eloot, S.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....},
  isbn      = {978-3-86009-007-7},
  pages     = {48},
  year      = {2007},
  language  = {de}
}
@article{GrundmannGerhardt1996,
  author    = {Grundmann, Reinhard and Gerhardt, Hans Joachim},
  title     = {Hart im Wind - Windger{\"a}usche an Fassadenelementen},
  series = {db deutsche bauzeitung. 130 (1996), H. 8},
  journal   = {db deutsche bauzeitung. 130 (1996), H. 8},
  pages     = {96 -- 98},
  year      = {1996},
  language  = {de}
}
@article{SchmidtEnningPfaff2018,
  author    = {Schmidt, Bernd and Enning, Manfred and Pfaff, Raphael},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge Teil 3: Einf{\"u}hrungsszenarien f{\"u}r aktive, kommunikative G{\"u}terwagen},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {67},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {60 -- 64},
  year      = {2018},
  abstract  = {Wenn durch innovative, automatisierte G{\"u}terwagen betriebswirtschaftliche Vorteile nutzbar gemacht werden sollen, muss die Migration auf das neue System in sinnvollen Teilschritten unter Ber{\"u}cksichtigung der organisationellen und betrieblichen Vereinbarkeit vorgenommen werden. Eine stufenweise Migration mit Nachr{\"u}stbarkeit und Kompatibilit{\"a}t kann die optimale Ausstattungsvariante f{\"u}r die unterschiedlichen Betriebsszenarien sowie eine Steigerung der Wirtschaftlichkeit des Gesamtsystems bieten.},
  language  = {de}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge. Teil 2: Ausgew{\"a}hlte technische Aspekte und Prozesse},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {66},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {74 -- 77},
  year      = {2017},
  language  = {de}
}
@article{EnningPfaff2017,
  author    = {Enning, Manfred and Pfaff, Raphael},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge. Teil 1: Gesamtsystembetrachtung und grundlegendes Konzept},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {66},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {1/2},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {12 -- 16},
  year      = {2017},
  language  = {de}
}
@article{Pfeiffer2002,
  author    = {Pfeiffer, Johann},
  title     = {Gute Chancen im Maschinenbau},
  series = {Aachener Nachrichten / Aachener Zeitung : Sonderbeil. (2002)},
  journal   = {Aachener Nachrichten / Aachener Zeitung : Sonderbeil. (2002)},
  publisher = {-},
  year      = {2002},
  language  = {de}
}
@article{Pfeiffer2002,
  author    = {Pfeiffer, Johann},
  title     = {Gute Chancen im Maschinenbau},
  series = {Rheinische Post : Sonderbeil. (2002)},
  journal   = {Rheinische Post : Sonderbeil. (2002)},
  year      = {2002},
  language  = {de}
}
@article{Enning1992,
  author    = {Enning, Manfred},
  title     = {Grunds{\"a}tzliche Konzepte bei Lageregelungen f{\"u}r Industrieroboter},
  series = {Maschinenmarkt. 98 (1992), H. 37},
  journal   = {Maschinenmarkt. 98 (1992), H. 37},
  isbn      = {0341-5775},
  year      = {1992},
  language  = {de}
}
@article{Gebhardt2004,
  author    = {Gebhardt, Andreas},
  title     = {Grundlagen des Rapid Prototyping: Eine Kurzdarstellung der Rapid Prototyping Verfahren},
  year      = {2004},
  abstract  = {Generative Verfahren sind seit etwa 1987 in den USA und seit etwa 1990 in Europa und Deutschland in Form von Rapid Prototyping Verfahren bekannt und haben sich in dieser Zeit von eher als exotisch anzusehenden Modellbauverfahren zu effizienten Werkzeugen f{\"u}r die Beschleunigung der Produktentstehung gewandelt. Mit der Weiterentwicklung der Verfahren und insbesondere der Materialien wird mehr und mehr das Feld der direkten Anwendung der Rapid Technologie zur Fertigung erschlossen. Rapid Technologien werden daher zum Schl{\"u}ssel f{\"u}r neue Konstruktionssystematiken und Fertigungsstrategien.},
  subject      = {Rapid prototyping},
  language  = {de}
}
@article{HanrathPlesken1985,
  author    = {Hanrath, Wilhelm and Plesken, Wilhelm},
  title     = {Group rings and irreducible representations of space groups / by W. Hanrath and W. Plesken},
  series = {Journal f{\"u}r die reine und angewandte Mathematik. 362 (1985)},
  journal   = {Journal f{\"u}r die reine und angewandte Mathematik. 362 (1985)},
  isbn      = {0075-4102},
  pages     = {130 -- 140},
  year      = {1985},
  language  = {en}
}
@article{Heinrichs1981,
  author    = {Heinrichs, Horst},
  title     = {Graphische Datenverarbeitung bei FEM-Berechnungen von Maschinen : interaktive Geometrieerfassung u. Netzwerkerstellung},
  pages     = {III, 123 S. : graph. Darst.},
  year      = {1981},
  language  = {de}
}
@article{Heinrichs1984,
  author    = {Heinrichs, Horst},
  title     = {Graphisch interaktiver FEM-Berechnungsarbeitsplatz},
  series = {Konstruktion, Elemente, Methoden. 21 (1984), H. 2},
  journal   = {Konstruktion, Elemente, Methoden. 21 (1984), H. 2},
  pages     = {82 -- 85},
  year      = {1984},
  language  = {de}
}
@article{Heinrichs1983,
  author    = {Heinrichs, Horst},
  title     = {Graphisch interaktive FE-Netzwerksgenerierung mit dem Programm FEDIG auf Rechnern ab 64 KB-Memory mit Digitizer},
  series = {IKO Software Service. 12 (1983)},
  journal   = {IKO Software Service. 12 (1983)},
  pages     = {191 -- 215},
  year      = {1983},
  language  = {de}
}
@article{HeinrichsHaub1991,
  author    = {Heinrichs, Horst and Haub, A.},
  title     = {Grafische Oberfl{\"a}chen vereinfachen den FEM-Einsatz},
  series = {CAD-CAM Report. 10 (1991), H. 3},
  journal   = {CAD-CAM Report. 10 (1991), H. 3},
  pages     = {79 -- 85},
  year      = {1991},
  language  = {de}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallschichten : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {39},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {37 -- 41},
  year      = {1978},
  language  = {de}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallbeschichtungen : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {26},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {9 -- 13},
  year      = {1978},
  language  = {de}
}
@article{KaemperThuerigenEhrfeldetal.1996,
  author    = {K{\"a}mper, Klaus-Peter and Th{\"u}rigen, C. and Ehrfeld, W. and Hagemann, B.},
  title     = {Gesichtspunkte beim Miniaturisieren von Umlaufr{\"a}dergetrieben. Th{\"u}rigen, C.; Ehrfeld, W. ; Hagemann, B.; K{\"a}mper, K.-P.; Lehr, H.; Michel, F.},
  series = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  journal   = {Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091269-3},
  pages     = {235},
  year      = {1996},
  language  = {de}
}
@article{Thomas2016,
  author    = {Thomas, Axel},
  title     = {Genussrechte als Instrument der Unternehmensfinanzierung von kommunalen Wohnungs- baugesellschaften},
  series = {VM Verwaltung und Management},
  volume    = {22},
  journal   = {VM Verwaltung und Management},
  number    = {6},
  publisher = {Nomos},
  address   = {Baden-Baden},
  issn      = {0947-9856},
  doi       = {10.5771/0947-9856-2016-6-322},
  pages     = {322 -- 327},
  year      = {2016},
  abstract  = {Die kommunalen Wohnungsbaugesellschaften und ihr Gesch{\"a}ftszweck bzw. Versorgungsauftrag erfahren aus gesamtgesellschaftlichen Gr{\"u}nden aktuell einen erheblichen Bedeutungszuwachs. Der kommunale Wohnungsbau soll und muss intensiviert werden, da z.B. zunehmend Wohnungsbindungen auslaufen. Bezahlbare Neubauten fehlen speziell Familien, Senioren, Studenten und Fl{\"u}chtlingen. Um das Investitionsvolumen zu bew{\"a}ltigen, bedarf es nicht nur der F{\"o}rderkredite, sondern auch der Zuf{\"u}hrung „frischen Kapitals". Der Beitrag stellt dar, dass Genussrechte ein interessantes und oft unbekanntes Finanzierungsinstrument f{\"u}r kommunale Wohnungsbaugesellschaften mit passgenauen Ausgestaltungsm{\"o}glichkeiten sind. Mit Hilfe von Genussrechten k{\"o}nnen die notwendigen Neubau-Investitionen solide mit Quasi-Eigenkapital unterlegt werden und den sozialen Wohnungsbau wiederbeleben. Genussrechte als Hybridkapital lassen sich mangels gesetzlicher Eingrenzung exakt und individuell ebenso an die Bed{\"u}rfnisse der kommunalen Wohnungsbaugesellschaft anpassen wie an die der Gesellschafter und des jeweiligen Neubauvorhabens.},
  language  = {de}
}
@article{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Generative Manufacturing of Ceramic Parts "Vision Rapid Prototyping"},
  year      = {2006},
  abstract  = {Table of Contents Introduction 1. Generative Manufacturing Processes 2. Classification of Generative Manufacturing Processes 3. Application of Generative Processes on the Fabrication of Ceramic Parts 3.1 Extrusion 3.2 3D-Printing 3.3 Sintering - Laser Sintering 3.4 Layer-Laminate Processes 3.5 Stereolithography (sometimes written: Stereo Lithography) 4. Layer Milling 5. Conclusion - Vision},
  subject      = {Rapid prototyping},
  language  = {en}
}
@article{Thomas2014,
  author    = {Thomas, Axel},
  title     = {Generation Y},
  series = {P.T. : Magazin f{\"u}r Wirtschaft und Gesellschaft},
  volume    = {10},
  journal   = {P.T. : Magazin f{\"u}r Wirtschaft und Gesellschaft},
  number    = {3},
  publisher = {OPS Netzwerk},
  address   = {Leipzig},
  issn      = {1860-501X},
  pages     = {6 -- 9},
  year      = {2014},
  language  = {de}
}
@article{PfeifferGauchelLuecke1999,
  author    = {Pfeiffer, Johann and Gauchel, Joachim and L{\"u}cke, Mathias},
  title     = {Genauigkeitsbetrachtungen in der CIM-Prozesskette},
  series = {4th International Scientific Colloquium CAx Techniques : proceedings of the 4th international scientific colloquium, Fachhochschule Bielefeld, Germany, September 13 - 15, 1999 / [organized in co-operation between Fachhochschule Bielefeld and Rzesz{\´o}w University of Technology ]. Ed. by Heinrich Ostholt},
  journal   = {4th International Scientific Colloquium CAx Techniques : proceedings of the 4th international scientific colloquium, Fachhochschule Bielefeld, Germany, September 13 - 15, 1999 / [organized in co-operation between Fachhochschule Bielefeld and Rzesz{\´o}w University of Technology ]. Ed. by Heinrich Ostholt},
  publisher = {[Fachhochsch.]},
  address   = {[Bielefeld]},
  isbn      = {3-00-004379-9},
  pages     = {323 -- 332},
  year      = {1999},
  language  = {de}
}
@article{Pfeiffer2004,
  author    = {Pfeiffer, Johann},
  title     = {Genauigkeit und Qualit{\"a}t von Freiformfl{\"a}chen / Projektleiter: Joachim Gauchel},
  series = {Forschungsbericht 2004 / Hrsg.: Der Rektor der Fachhochschule Aachen},
  journal   = {Forschungsbericht 2004 / Hrsg.: Der Rektor der Fachhochschule Aachen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  pages     = {180},
  year      = {2004},
  language  = {de}
}
@article{DiltheySchleserHanischetal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hanisch, Vera and Gries, Thomas},
  title     = {Garnzugpr{\"u}fung polymergetr{\"a}nkter Textilien f{\"u}r die Bewehrung von Beton},
  series = {Technische Textilien},
  volume    = {49},
  journal   = {Technische Textilien},
  number    = {1},
  issn      = {0323-3243},
  pages     = {48 -- 50},
  year      = {2006},
  language  = {de}
}
@article{UlmerBraunChengetal.2022,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Gamification of virtual reality assembly training: Effects of a combined point and level system on motivation and training results},
  series = {International Journal of Human-Computer Studies},
  volume    = {165},
  journal   = {International Journal of Human-Computer Studies},
  number    = {Art. No. 102854},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1071-5819},
  doi       = {10.1016/j.ijhcs.2022.102854},
  year      = {2022},
  abstract  = {Virtual Reality (VR) offers novel possibilities for remote training regardless of the availability of the actual equipment, the presence of specialists, and the training locations. Research shows that training environments that adapt to users' preferences and performance can promote more effective learning. However, the observed results can hardly be traced back to specific adaptive measures but the whole new training approach. This study analyzes the effects of a combined point and leveling VR-based gamification system on assembly training targeting specific training outcomes and users' motivations. The Gamified-VR-Group with 26 subjects received the gamified training, and the Non-Gamified-VR-Group with 27 subjects received the alternative without gamified elements. Both groups conducted their VR training at least three times before assembling the actual structure. The study found that a level system that gradually increases the difficulty and error probability in VR can significantly lower real-world error rates, self-corrections, and support usages. According to our study, a high error occurrence at the highest training level reduced the Gamified-VR-Group's feeling of competence compared to the Non-Gamified-VR-Group, but at the same time also led to lower error probabilities in real-life. It is concluded that a level system with a variable task difficulty should be combined with carefully balanced positive and negative feedback messages. This way, better learning results, and an improved self-evaluation can be achieved while not causing significant impacts on the participants' feeling of competence.},
  language  = {en}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {F{\"u}r viele, viele bunte Smarties : komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung},
  series = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik},
  volume    = {30},
  journal   = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik},
  number    = {H. 6},
  issn      = {1430-9807},
  pages     = {30 -- 32},
  year      = {1998},
  language  = {de}
}
@article{SedlacekSchaetzkeGessleretal.2004,
  author    = {Sedlacek, G. and Sch{\"a}tzke, C. and Geßler, M. and Schleser, Markus},
  title     = {F{\"u}gen von Bauteilen aus textilbewehrtem Beton},
  series = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  journal   = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  issn      = {0005-6650},
  pages     = {569 -- 575},
  year      = {2004},
  language  = {de}
}