@inproceedings{LangohrBungCrookston2022, author = {Langohr, Philipp and Bung, Daniel Bernhard and Crookston, Brian M.}, title = {Hybrid investigation of labyrinth weirs: Discharge capacity and energy dissipation}, series = {Proceedings of the 39th IAHR World Congress}, booktitle = {Proceedings of the 39th IAHR World Congress}, editor = {Ortega-S{\´a}nchez, Miguel}, publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)}, address = {Madrid}, isbn = {978-90-832612-1-8}, issn = {2521-7119 (print)}, doi = {10.3850/IAHR-39WC252171192022738}, pages = {2313 -- 2318}, year = {2022}, abstract = {The replacement of existing spillway crests or gates with labyrinth weirs is a proven techno-economical means to increase the discharge capacity when rehabilitating existing structures. However, additional information is needed regarding energy dissipation of such weirs, since due to the folded weir crest, a three-dimensional flow field is generated, yielding more complex overflow and energy dissipation processes. In this study, CFD simulations of labyrinth weirs were conducted 1) to analyze the discharge coefficients for different discharges to compare the Cd values to literature data and 2) to analyze and improve energy dissipation downstream of the structure. All tests were performed for a structure at laboratory scale with a height of approx. P = 30.5 cm, a ratio of the total crest length to the total width of 4.7, a sidewall angle of 10° and a quarter-round weir crest shape. Tested headwater ratios were 0.089 ≤ HT/P ≤ 0.817. For numerical simulations, FLOW-3D Hydro was employed, solving the RANS equations with use of finite-volume method and RNG k-ε turbulence closure. In terms of discharge capacity, results were compared to data from physical model tests performed at the Utah Water Research Laboratory (Utah State University), emphasizing higher discharge coefficients from CFD than from the physical model. For upstream heads, some discrepancy in the range of ± 1 cm between literature, CFD and physical model tests was identified with a discussion regarding differences included in the manuscript. For downstream energy dissipation, variable tailwater depths were considered to analyze the formation and sweep-out of a hydraulic jump. It was found that even for high discharges, relatively low downstream Froude numbers were obtained due to high energy dissipation involved by the three-dimensional flow between the sidewalls. The effects of some additional energy dissipation devices, e.g. baffle blocks or end sills, were also analyzed. End sills were found to be non-effective. However, baffle blocks with different locations may improve energy dissipation downstream of labyrinth weirs.}, language = {en} } @inproceedings{CrookstonBung2022, author = {Crookston, Brian M. and Bung, Daniel Bernhard}, title = {Application of RGB-D cameras in hydraulic laboratory studies}, series = {Proceedings of the 39th IAHR World Congress}, booktitle = {Proceedings of the 39th IAHR World Congress}, editor = {Ortega-S{\´a}nchez, Miguel}, publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)}, address = {Madrid}, isbn = {978-90-832612-1-8}, issn = {2521-7119 (print)}, doi = {10.3850/IAHR-39WC252171192022964}, pages = {5127 -- 5133}, year = {2022}, abstract = {Non-intrusive measuring techniques have attained a lot of interest in relation to both hydraulic modeling and prototype applications. Complimenting acoustic techniques, significant progress has been made for the development of new optical methods. Computer vision techniques can help to extract new information, e. g. high-resolution velocity and depth data, from videos captured with relatively inexpensive, consumer-grade cameras. Depth cameras are sensors providing information on the distance between the camera and observed features. Currently, sensors with different working principles are available. Stereoscopic systems reference physical image features (passive system) from two perspectives; in order to enhance the number of features and improve the results, a sensor may also estimate the disparity from a detected light to its original projection (active stereo system). In the current study, the RGB-D camera Intel RealSense D435, working on such stereo vision principle, is used in different, typical hydraulic modeling applications. All tests have been conducted at the Utah Water Research Laboratory. This paper will demonstrate the performance and limitations of the RGB-D sensor, installed as a single camera and as camera arrays, applied to 1) detect the free surface for highly turbulent, aerated hydraulic jumps, for free-falling jets and for an energy dissipation basin downstream of a labyrinth weir and 2) to monitor local scours upstream and downstream of a Piano Key Weir. It is intended to share the authors' experiences with respect to camera settings, calibration, lightning conditions and other requirements in order to promote this useful, easily accessible device. Results will be compared to data from classical instrumentation and the literature. It will be shown that even in difficult application, e. g. the detection of a highly turbulent, fluctuating free-surface, the RGB-D sensor may yield similar accuracy as classical, intrusive probes.}, language = {en} } @book{KurzSchwer2022, author = {Kurz, Melanie and Schwer, Thilo}, title = {Raster, Regeln, Ratio : Systematiken und Normungen im Design des 20. Jahrhunderts / herausgegeben von Melanie Kurz und Thilo Schwer}, series = {Schriften / Gesellschaft f{\"u}r Designgeschichte}, journal = {Schriften / Gesellschaft f{\"u}r Designgeschichte}, publisher = {avedition}, address = {Stuttgart}, isbn = {978-3-89986-380-2}, pages = {155 Seiten}, year = {2022}, language = {de} } @article{Fabo2022, author = {Fabo, Sabine}, title = {Das Parasit{\"a}re in der Pandemie}, series = {Parasite Art}, journal = {Parasite Art}, number = {Issue 2}, editor = {Wirth, Jacob}, publisher = {Parasite Art}, pages = {8 -- 11}, year = {2022}, language = {de} } @incollection{Kurz2022, author = {Kurz, Melanie}, title = {Vom Werkbundstreit bis zur Papierformatnormung - welche Rolle der Chemie-Nobelpreistr{\"a}ger Friedrich Wilhelm Ostwald bei Typisierungsbestrebungen im Design spielt}, series = {Raster, Regeln, Ratio : Systematiken und Normungen des 20. Jahrhunderts}, volume = {2022}, booktitle = {Raster, Regeln, Ratio : Systematiken und Normungen des 20. Jahrhunderts}, publisher = {avedition}, address = {Stuttgart}, isbn = {978-3-89986-380-2}, pages = {6 -- 17}, year = {2022}, language = {de} } @incollection{Fabo2022, author = {Fabo, Sabine}, title = {Pandemische Momente}, series = {Interaktion - Emotion - Desinfektion ; Kunst und Museum in Zeiten von Corona / Birgit Richard, Jana M{\"u}ller, Niklas von Reischach (Hrsg.)}, booktitle = {Interaktion - Emotion - Desinfektion ; Kunst und Museum in Zeiten von Corona / Birgit Richard, Jana M{\"u}ller, Niklas von Reischach (Hrsg.)}, publisher = {Campus}, address = {Frankfurt ; New York}, isbn = {978-3-593-51520-5 (Print)}, pages = {137 -- 140}, year = {2022}, language = {de} } @book{KurzSchwer2022, author = {Kurz, Melanie and Schwer, Thilo}, title = {Geschichte des Designs}, edition = {1. Auflage}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-78813-0}, pages = {128 Seiten}, year = {2022}, abstract = {Dieser Band bietet einen kompakten {\"U}berblick {\"u}ber die wichtigsten Stationen des Produktdesigns vom Beginn der Industrialisierung bis heute. Im Zentrum stehen ikonische Alltagsgegenst{\"a}nde vom Thonet-Stuhl bis zum iPhone. Anschaulich und kenntnisreich nehmen Melanie Kurz und Thilo Schwer dabei auch die gesellschaftspolitische Situation, in der die Objekte entstanden sind, in den Blick.}, language = {de} } @incollection{Fabo2022, author = {Fabo, Sabine}, title = {Pl{\"u}schviren - Zur Konstruktion von N{\"a}he in Zeiten der Pandemie}, series = {Interaktion - Emotion - Desinfektion ; Kunst und Museum in Zeiten von Corona / Birgit Richard, Jana M{\"u}ller, Niklas von Reischach (Hrsg.)}, booktitle = {Interaktion - Emotion - Desinfektion ; Kunst und Museum in Zeiten von Corona / Birgit Richard, Jana M{\"u}ller, Niklas von Reischach (Hrsg.)}, publisher = {Campus}, address = {Frankfurt ; New York}, isbn = {978-3-593-51520-5 (Print)}, pages = {45 -- 69}, year = {2022}, language = {de} } @phdthesis{Biewendt2022, author = {Biewendt, Marcel}, title = {Socio-Economic challenges in sustainability and resource management}, publisher = {Hungarian University of Agriculture and Life Sciences}, pages = {160 Seiten}, year = {2022}, abstract = {This dissertation uses in first stage a macroeconomic investigation to examine the dependence, influence and corruption of socio-economic development through effects of sustainability and resource management. The conducted research found that the state's dependence on its citizens decreases when the state's sources of revenue are largely detached and independent of the citizens' financial resources. In this case, financial resources are taxes and duties provided by the citizens. One possible consequence is the restriction of state investment in its citizens. Both the qualitative literature review and the quantitative data analysis revealed a negative correlation between socio-economic development and the resource economy's share of GDP for the period under study. The microeconomic investigation was primarily conducted through an intensive literature review. It was shown that the rebound effect as such is already very well researched. However, it also became clear that avoidance strategies for the rebound effect and links to sustainability initiatives are scarce or non-existent. The need for a redesign of the impact analysis with regard to technological innovations and their influence on resource consumption and resource management has become clear on the basis of the present study. Further, emerging and developing countries in particular, which will be confronted in the foreseeable future not only with the fundamental problems of resource abundance in the overall economic context, but also with the issues of their sustainable use, should be confronted with these problems as early as possible in order to find solutions in a timely manner.}, language = {de} } @article{UysalCreutzFiratetal.2022, author = {Uysal, Karya and Creutz, Till and Firat, Ipek Seda and Artmann, Gerhard and Teusch, Nicole and Temiz Artmann, Ayseg{\"u}l}, title = {Bio-functionalized ultra-thin, large-area and waterproof silicone membranes for biomechanical cellular loading and compliance experiments}, series = {Polymers}, volume = {14}, journal = {Polymers}, number = {11}, publisher = {MDPI}, address = {Basel}, issn = {2073-4360}, pages = {2213}, year = {2022}, abstract = {Biocompatibility, flexibility and durability make polydimethylsiloxane (PDMS) membranes top candidates in biomedical applications. CellDrum technology uses large area, <10 µm thin membranes as mechanical stress sensors of thin cell layers. For this to be successful, the properties (thickness, temperature, dust, wrinkles, etc.) must be precisely controlled. The following parameters of membrane fabrication by means of the Floating-on-Water (FoW) method were investigated: (1) PDMS volume, (2) ambient temperature, (3) membrane deflection and (4) membrane mechanical compliance. Significant differences were found between all PDMS volumes and thicknesses tested (p < 0.01). They also differed from the calculated values. At room temperatures between 22 and 26 °C, significant differences in average thickness values were found, as well as a continuous decrease in thicknesses within a 4 °C temperature elevation. No correlation was found between the membrane thickness groups (between 3-4 µm) in terms of deflection and compliance. We successfully present a fabrication method for thin bio-functionalized membranes in conjunction with a four-step quality management system. The results highlight the importance of tight regulation of production parameters through quality control. The use of membranes described here could also become the basis for material testing on thin, viscous layers such as polymers, dyes and adhesives, which goes far beyond biological applications.}, language = {en} } @article{UysalFiratCreutzetal.2022, author = {Uysal, Karya and Firat, Ipek Serat and Creutz, Till and Aydin, Inci Cansu and Artmann, Gerhard and Teusch, Nicole and Temiz Artmann, Ayseg{\"u}l}, title = {A novel in vitro wound healing assay using free-standing, ultra-thin PDMS membranes}, series = {membranes}, volume = {2023}, journal = {membranes}, number = {13(1)}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/membranes13010022}, pages = {Artikel 22}, year = {2022}, abstract = {Advances in polymer science have significantly increased polymer applications in life sciences. We report the use of free-standing, ultra-thin polydimethylsiloxane (PDMS) membranes, called CellDrum, as cell culture substrates for an in vitro wound model. Dermal fibroblast monolayers from 28- and 88-year-old donors were cultured on CellDrums. By using stainless steel balls, circular cell-free areas were created in the cell layer (wounding). Sinusoidal strain of 1 Hz, 5\% strain, was applied to membranes for 30 min in 4 sessions. The gap circumference and closure rate of un-stretched samples (controls) and stretched samples were monitored over 4 days to investigate the effects of donor age and mechanical strain on wound closure. A significant decrease in gap circumference and an increase in gap closure rate were observed in trained samples from younger donors and control samples from older donors. In contrast, a significant decrease in gap closure rate and an increase in wound circumference were observed in the trained samples from older donors. Through these results, we propose the model of a cell monolayer on stretchable CellDrums as a practical tool for wound healing research. The combination of biomechanical cell loading in conjunction with analyses such as gene/protein expression seems promising beyond the scope published here.}, language = {en} } @inproceedings{WeissHeslenfeldSaeweetal.2022, author = {Weiss, Christian and Heslenfeld, Jonas and Saewe, Jasmin Kathrin and Bremen, Sebastian and H{\"a}fner, Constantin Leon}, title = {Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF)}, series = {Procedia CIRP 12th CIRP Conference on Photonic Technologies [LANE 2022]}, volume = {111}, booktitle = {Procedia CIRP 12th CIRP Conference on Photonic Technologies [LANE 2022]}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2022.08.102}, pages = {115 -- 120}, year = {2022}, abstract = {In the Laser Powder Bed Fusion (LPBF) process, parts are built out of metal powder material by exposure of a laser beam. During handling operations of the powder material, several influencing factors can affect the properties of the powder material and therefore directly influence the processability during manufacturing. Contamination by moisture due to handling operations is one of the most critical aspects of powder quality. In order to investigate the influences of powder humidity on LPBF processing, four materials (AlSi10Mg, Ti6Al4V, 316L and IN718) are chosen for this study. The powder material is artificially humidified, subsequently characterized, manufactured into cubic samples in a miniaturized process chamber and analyzed for their relative density. The results indicate that the processability and reproducibility of parts made of AlSi10Mg and Ti6Al4V are susceptible to humidity, while IN718 and 316L are barely influenced.}, language = {en} } @article{AngermannGuenthnerHanssenetal.2022, author = {Angermann, Susanne and G{\"u}nthner, Roman and Hanssen, Henner and Lorenz, Georg and Braunisch, Matthias C. and Steubl, Dominik and Matschkal, Julia and Kemmner, Stephan and Hausinger, Renate and Block, Zenonas and Haller, Bernhard and Heemann, Uwe and Kotliar, Konstantin and Grimmer, Timo and Schmaderer, Christoph}, title = {Cognitive impairment and microvascular function in end-stage renal disease}, series = {International Journal of Methods in Psychiatric Research (MPR)}, volume = {31}, journal = {International Journal of Methods in Psychiatric Research (MPR)}, number = {2}, publisher = {Wiley}, issn = {1049-8931 (Print)}, doi = {10.1002/mpr.1909}, pages = {1 -- 10}, year = {2022}, abstract = {Objective Hemodialysis patients show an approximately threefold higher prevalence of cognitive impairment compared to the age-matched general population. Impaired microcirculatory function is one of the assumed causes. Dynamic retinal vessel analysis is a quantitative method for measuring neurovascular coupling and microvascular endothelial function. We hypothesize that cognitive impairment is associated with altered microcirculation of retinal vessels. Methods 152 chronic hemodialysis patients underwent cognitive testing using the Montreal Cognitive Assessment. Retinal microcirculation was assessed by Dynamic Retinal Vessel Analysis, which carries out an examination recording retinal vessels' reaction to a flicker light stimulus under standardized conditions. Results In unadjusted as well as in adjusted linear regression analyses a significant association between the visuospatial executive function domain score of the Montreal Cognitive Assessment and the maximum arteriolar dilation as response of retinal arterioles to the flicker light stimulation was obtained. Conclusion This is the first study determining retinal microvascular function as surrogate for cerebral microvascular function and cognition in hemodialysis patients. The relationship between impairment in executive function and reduced arteriolar reaction to flicker light stimulation supports the involvement of cerebral small vessel disease as contributing factor for the development of cognitive impairment in this patient population and might be a target for noninvasive disease monitoring and therapeutic intervention.}, language = {en} } @article{KotliarOrtnerConradietal.2022, author = {Kotliar, Konstantin and Ortner, Marion and Conradi, Anna and Hacker, Patricia and Hauser, Christine and G{\"u}nthner, Roman and Moser, Michaela and Muggenthaler, Claudia and Diehl-Schmid, Janine and Priller, Josef and Schmaderer, Christoph and Grimmer, Timo}, title = {Altered retinal cerebral vessel oscillation frequencies in Alzheimer's disease compatible with impaired amyloid clearance}, series = {Neurobiology of Aging}, volume = {120}, journal = {Neurobiology of Aging}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0197-4580}, doi = {10.1016/j.neurobiolaging.2022.08.012}, pages = {117 -- 127}, year = {2022}, abstract = {Retinal vessels are similar to cerebral vessels in their structure and function. Moderately low oscillation frequencies of around 0.1 Hz have been reported as the driving force for paravascular drainage in gray matter in mice and are known as the frequencies of lymphatic vessels in humans. We aimed to elucidate whether retinal vessel oscillations are altered in Alzheimer's disease (AD) at the stage of dementia or mild cognitive impairment (MCI). Seventeen patients with mild-to-moderate dementia due to AD (ADD); 23 patients with MCI due to AD, and 18 cognitively healthy controls (HC) were examined using Dynamic Retinal Vessel Analyzer. Oscillatory temporal changes of retinal vessel diameters were evaluated using mathematical signal analysis. Especially at moderately low frequencies around 0.1 Hz, arterial oscillations in ADD and MCI significantly prevailed over HC oscillations and correlated with disease severity. The pronounced retinal arterial vasomotion at moderately low frequencies in the ADD and MCI groups would be compatible with the view of a compensatory upregulation of paravascular drainage in AD and strengthen the amyloid clearance hypothesis.}, language = {en} } @incollection{MoorkampPetersonUibel2022, author = {Moorkamp, Wilfried and Peterson, Leif Arne and Uibel, Thomas}, title = {Nachhaltige Holzbr{\"u}cken f{\"u}r Geh- und Radwege}, series = {Bauphysik Kalender 2022: Holzbau, 22. Jahrgang}, booktitle = {Bauphysik Kalender 2022: Holzbau, 22. Jahrgang}, editor = {Fouad, Nabil A.}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {9783433033609 (Print)}, doi = {10.1002/9783433611081.ch17}, pages = {574 -- 592}, year = {2022}, abstract = {Am Lehr- und Forschungsgebiet Holzbau der Fachhochschule Aachen wurden im Rahmen des Forschungsvorhabens „Nachhaltige Standardbr{\"u}cken in Holzbauweise" Standardtypen f{\"u}r Geh- und Radwegbr{\"u}cken entwickelt. Die Br{\"u}cken sind durch konsequente Umsetzungen von Maßnahmen des konstruktiven Holzschutzes f{\"u}r eine Nutzung von mehr als 80~Jahren konzipiert. Innovative L{\"o}sungen f{\"u}r Bauteile und Anschl{\"u}sse sowie Materialalternativen im Bereich des Belages und der Gel{\"a}nder erm{\"o}glichen eine wartungsarme Konstruktion und tragen somit zur Wirtschaftlichkeit und Nachhaltigkeit bei. Um den Einsatz der entwickelten Standardbr{\"u}ckentypen in der Praxis zu erleichtern, wurden Leistungsverzeichnisse, Musterstatiken, Musterzeichnungen und umfangreiche Detailkataloge als Unterst{\"u}tzung f{\"u}r Planer und Bauherren erstellt. Damit die Randbedingungen f{\"u}r eine lange Lebensdauer w{\"a}hrend der Nutzung der Br{\"u}cke erhalten bleiben, wurden Leitf{\"a}den f{\"u}r die Pflege und Wartung sowie f{\"u}r die Br{\"u}ckenpr{\"u}fung erarbeitet. Der Beitrag gibt Einblicke in das Forschungsvorhaben und seine Resultate.}, language = {de} } @article{WerfelGuenthnerHapfelmeieretal.2022, author = {Werfel, Stanislas and G{\"u}nthner, Roman and Hapfelmeier, Alexander and Hanssen, Henner and Kotliar, Konstantin and Heemann, Uwe and Schmaderer, Christoph}, title = {Identification of cardiovascular high-risk groups from dynamic retinal vessel signals using untargeted machine learning}, series = {Cardiovascular Research}, volume = {118}, journal = {Cardiovascular Research}, number = {2}, editor = {Guzik, Tomasz J.}, publisher = {Oxford University Press}, address = {Oxford}, issn = {0008-6363}, doi = {10.1093/cvr/cvab040}, pages = {612 -- 621}, year = {2022}, abstract = {Dynamic retinal vessel analysis (DVA) provides a non-invasive way to assess microvascular function in patients and potentially to improve predictions of individual cardiovascular (CV) risk. The aim of our study was to use untargeted machine learning on DVA in order to improve CV mortality prediction and identify corresponding response alterations.}, language = {en} } @inproceedings{VeettilRakshitSchopenetal.2022, author = {Veettil, Yadu Krishna Morassery and Rakshit, Shantam and Schopen, Oliver and Kemper, Hans and Esch, Thomas and Shabani, Bahman}, title = {Automated Control System Strategies to Ensure Safety of PEM Fuel Cells Using Kalman Filters}, series = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia}, booktitle = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia}, editor = {Bin Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Singh, Amrik Singh Phuman and Munir, Fudhail Abdul and Ibrahim, Asriana}, publisher = {Springer Nature}, address = {Singapore}, isbn = {978-981-19-3178-9}, issn = {2195-4356}, doi = {10.1007/978-981-19-3179-6_55}, pages = {296 -- 299}, year = {2022}, abstract = {Having well-defined control strategies for fuel cells, that can efficiently detect errors and take corrective action is critically important for safety in all applications, and especially so in aviation. The algorithms not only ensure operator safety by monitoring the fuel cell and connected components, but also contribute to extending the health of the fuel cell, its durability and safe operation over its lifetime. While sensors are used to provide peripheral data surrounding the fuel cell, the internal states of the fuel cell cannot be directly measured. To overcome this restriction, Kalman Filter has been implemented as an internal state observer. Other safety conditions are evaluated using real-time data from every connected sensor and corrective actions automatically take place to ensure safety. The algorithms discussed in this paper have been validated thorough Model-in-the-Loop (MiL) tests as well as practical validation at a dedicated test bench.}, language = {en} } @inproceedings{SattlerAttiAlexopoulosetal.2022, author = {Sattler, Johannes Christoph and Atti, Vikrama and Alexopoulos, Spiros and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Dutta, Siddharth and Kioutsioukis, Ioannis}, title = {DNI forecast tool for the smart operation of a parabolic trough collector system with concrete thermal energy storage: Theory, results and outlook}, series = {SolarPACES 2022 conference proceedings}, booktitle = {SolarPACES 2022 conference proceedings}, number = {1}, publisher = {TIB Open Publishing}, address = {Hannover}, issn = {2751-9899 (online)}, doi = {10.52825/solarpaces.v1i.731}, pages = {9 Seiten}, year = {2022}, abstract = {This work presents a basic forecast tool for predicting direct normal irradiance (DNI) in hourly resolution, which the Solar-Institut J{\"u}lich (SIJ) is developing within a research project. The DNI forecast data shall be used for a parabolic trough collector (PTC) system with a concrete thermal energy storage (C-TES) located at the company KEAN Soft Drinks Ltd in Limassol, Cyprus. On a daily basis, 24-hour DNI prediction data in hourly resolution shall be automatically produced using free or very low-cost weather forecast data as input. The purpose of the DNI forecast tool is to automatically transfer the DNI forecast data on a daily basis to a main control unit (MCU). The MCU automatically makes a smart decision on the operation mode of the PTC system such as steam production mode and/or C-TES charging mode. The DNI forecast tool was evaluated using historical data of measured DNI from an on-site weather station, which was compared to the DNI forecast data. The DNI forecast tool was tested using data from 56 days between January and March 2022, which included days with a strong variation in DNI due to cloud passages. For the evaluation of the DNI forecast reliability, three categories were created and the forecast data was sorted accordingly. The result was that the DNI forecast tool has a reliability of 71.4 \% based on the tested days. The result fulfils SIJ's aim to achieve a reliability of around 70 \%, but SIJ aims to still improve the DNI forecast quality.}, language = {en} } @incollection{HoffschmidtAlexopoulosRauetal.2022, author = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and Rau, Christoph and Sattler, Johannes, Christoph and Anthrakidis, Anette and Teixeira Boura, Cristiano Jos{\´e} and O'Connor, B. and Chico Caminos, R.A. and Rend{\´o}n, C. and Hilger, P.}, title = {Concentrating solar power}, series = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications}, booktitle = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {978-0-12-819734-9}, pages = {670 -- 724}, year = {2022}, abstract = {The focus of this chapter is the production of power and the use of the heat produced from concentrated solar thermal power (CSP) systems. The chapter starts with the general theoretical principles of concentrating systems including the description of the concentration ratio, the energy and mass balance. The power conversion systems is the main part where solar-only operation and the increase in operational hours. Solar-only operation include the use of steam turbines, gas turbines, organic Rankine cycles and solar dishes. The operational hours can be increased with hybridization and with storage. Another important topic is the cogeneration where solar cooling, desalination and of heat usage is described. Many examples of commercial CSP power plants as well as research facilities from the past as well as current installed and in operation are described in detail. The chapter closes with economic and environmental aspects and with the future potential of the development of CSP around the world.}, language = {en} } @inproceedings{SchopenShabaniEschetal.2022, author = {Schopen, Oliver and Shabani, Bahman and Esch, Thomas and Kemper, Hans and Shah, Neel}, title = {Quantitative evaluation of health management designs for fuel cell systems in transport vehicles}, series = {2nd UNITED-SAIG International Conference Proceedings}, booktitle = {2nd UNITED-SAIG International Conference Proceedings}, editor = {Rahim, S.A. and As'arry, A. and Zuhri, M.Y.M. and Harmin, M.Y. and Rezali, K.A.M. and Hairuddin, A.A.}, pages = {1 -- 3}, year = {2022}, abstract = {Focusing on transport vehicles, mainly with regard to aviation applications, this paper presents compilation and subsequent quantitative evaluation of methods aimed at building an optimum integrated health management solution for fuel cell systems. The methods are divided into two different main types and compiled in a related scheme. Furthermore, different methods are analysed and evaluated based on parameters specific to the aviation context of this study. Finally, the most suitable method for use in fuel cell health management systems is identified and its performance and suitability is quantified.}, language = {en} } @article{AbbasBalcBremenetal.2022, author = {Abbas, Karim and Balc, Nicolae and Bremen, Sebastian and Skupin, Marco}, title = {Crystallization and aging behavior of polyetheretherketone PEEK within rapid tooling and rubber molding}, series = {Journal of Manufacturing and Materials Processing}, volume = {6}, journal = {Journal of Manufacturing and Materials Processing}, number = {5}, publisher = {MDPI}, address = {Basel}, issn = {2504-4494}, doi = {10.3390/jmmp6050093}, pages = {1 -- 12}, year = {2022}, abstract = {In times of short product life cycles, additive manufacturing and rapid tooling are important methods to make tool development and manufacturing more efficient. High-performance polymers are the key to mold production for prototypes and small series. However, the high temperatures during vulcanization injection molding cause thermal aging and can impair service life. The extent to which the thermal stress over the entire process chain stresses the material and whether it leads to irreversible material aging is evaluated. To this end, a mold made of PEEK is fabricated using fused filament fabrication and examined for its potential application. The mold is heated to 200 ◦C, filled with rubber, and cured. A differential scanning calorimetry analysis of each process step illustrates the crystallization behavior and first indicates the material resistance. It shows distinct cold crystallization regions at a build chamber temperature of 90 ◦C. At an ambient temperature above Tg, crystallization of 30\% is achieved, and cold crystallization no longer occurs. Additional tensile tests show a decrease in tensile strength after ten days of thermal aging. The steady decrease in recrystallization temperature indicates degradation of the additives. However, the tensile tests reveal steady embrittlement of the material due to increasing crosslinking.}, language = {en} } @article{NiedermeierPennerUsherovichetal.2023, author = {Niedermeier, Jana and Penner, Crystal and Usherovich, Samuel and B{\´e}langer-Champagne, Camille and Paulßen, Elisabeth and Hoehr, Cornelia}, title = {Optical Fibers as Dosimeter Detectors for Mixed Proton/Neutron Fields - A Biological Dosimeter}, series = {electronics}, volume = {12}, journal = {electronics}, number = {2}, publisher = {MDPI}, address = {Basel}, issn = {2079-9292}, doi = {10.3390/electronics12020324}, pages = {11 Seiten}, year = {2023}, abstract = {In recent years, proton therapy has gained importance as a cancer treatment modality due to its conformality with the tumor and the sparing of healthy tissue. However, in the interaction of the protons with the beam line elements and patient tissues, potentially harmful secondary neutrons are always generated. To ensure that this neutron dose is as low as possible, treatment plans could be created to also account for and minimize the neutron dose. To monitor such a treatment plan, a compact, easy to use, and inexpensive dosimeter must be developed that not only measures the physical dose, but which can also distinguish between proton and neutron contributions. To that end, plastic optical fibers with scintillation materials (Gd₂O₂S:Tb, Gd₂O₂S:Eu, and YVO₄:Eu) were irradiated with protons and neutrons. It was confirmed that sensors with different scintillation materials have different sensitivities to protons and neutrons. A combination of these three scintillators can be used to build a detector array to create a biological dosimeter.}, language = {en} } @article{RuebbelkeVoegeleGrajewskietal.2023, author = {R{\"u}bbelke, Dirk and V{\"o}gele, Stefan and Grajewski, Matthias and Zobel, Luzy}, title = {Cross border adjustment mechanism: Initial data for the assessment of hydrogen-based steel production}, series = {Data in Brief}, volume = {47}, journal = {Data in Brief}, number = {Article 108907}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2352-3409}, doi = {10.1016/j.dib.2023.108907}, pages = {1 -- 5}, year = {2023}, abstract = {Ambitious climate targets affect the competitiveness of industries in the international market. To prevent such industries from moving to other countries in the wake of increased climate protection efforts, cost adjustments may become necessary. Their design requires knowledge of country-specific production costs. Here, we present country-specific cost figures for different production routes of steel, paying particular attention to transportation costs. The data can be used in floor price models aiming to assess the competitiveness of different steel production routes in different countries (R{\"u}bbelke, 2022).}, language = {en} } @article{HaegerGrankinWagner2023, author = {Haeger, Gerrit and Grankin, Alina and Wagner, Michaela}, title = {Construction of an Aspergillus oryzae triple amylase deletion mutant as a chassis to evaluate industrially relevant amylases using multiplex CRISPR/Cas9 editing technology}, series = {Applied Research}, journal = {Applied Research}, number = {Early View}, publisher = {Wiley-VCH}, issn = {2702-4288}, doi = {10.1002/appl.202200106}, pages = {1 -- 15}, year = {2023}, abstract = {Aspergillus oryzae is an industrially relevant organism for the secretory production of heterologous enzymes, especially amylases. The activities of potential heterologous amylases, however, cannot be quantified directly from the supernatant due to the high background activity of native α-amylase. This activity is caused by the gene products of amyA, amyB, and amyC. In this study, an in vitro CRISPR/Cas9 system was established in A. oryzae to delete these genes simultaneously. First, pyrG of A. oryzae NSAR1 was mutated by exploiting NHEJ to generate a counter-selection marker. Next, all amylase genes were deleted simultaneously by co-transforming a repair template carrying pyrG of Aspergillus nidulans and flanking sequences of amylase gene loci. The rate of obtained triple knock-outs was 47\%. We showed that triple knockouts do not retain any amylase activity in the supernatant. The established in vitro CRISPR/Cas9 system was used to achieve sequence-specific knock-in of target genes. The system was intended to incorporate a single copy of the gene of interest into the desired host for the development of screening methods. Therefore, an integration cassette for the heterologous Fpi amylase was designed to specifically target the amyB locus. The site-specific integration rate of the plasmid was 78\%, with exceptional additional integrations. Integration frequency was assessed via qPCR and directly correlated with heterologous amylase activity. Hence, we could compare the efficiency between two different signal peptides. In summary, we present a strategy to exploit CRISPR/Cas9 for gene mutation, multiplex knock-out, and the targeted knock-in of an expression cassette in A. oryzae. Our system provides straightforward strain engineering and paves the way for development of fungal screening systems.}, language = {en} } @incollection{EngelmannBaumann2023, author = {Engelmann, Ulrich M. and Baumann, Martin}, title = {Moderationsexpertise f{\"u}r QMBs - die Methoden}, series = {Qualit{\"a}tsmanagement im Gesundheitswesen}, booktitle = {Qualit{\"a}tsmanagement im Gesundheitswesen}, editor = {Herbig, Nicola and Poppelreuter, Stefan}, edition = {60. Update}, publisher = {T{\"U}V-Verlag}, address = {K{\"o}ln}, isbn = {978-3-8249-0714-4}, pages = {Kapitel 10815}, year = {2023}, abstract = {Damit Sie als Moderator effektiv und professionell moderieren k{\"o}nnen, sollten Sie die entsprechenden Methoden kennen. Mit den richtigen Methoden k{\"o}nnen Sie Diskussionen leiten, Konflikte l{\"o}sen, die Teilnehmer motivieren und daf{\"u}r sorgen, dass die Ziele der Veranstaltung erreicht werden. Außerdem helfen sie Ihnen, eine positive Atmosph{\"a}re zu schaffen und das Interesse der Teilnehmer zu halten. In diesem zweiten Beitrag der mehrteiligen Serie lernen Sie die grunds{\"a}tzlichen Methoden kennen, um erfolgreiche Teamsitzungen, Arbeitsgruppentreffen, Kick-offs und Meetings durchzuf{\"u}hren.}, language = {de} } @masterthesis{Heising2023, type = {Bachelor Thesis}, author = {Heising, Michelle}, title = {Nachhaltige Gestaltung im urbanen {\"o}ffentlichen Raum : erneuerbare Energien in Begegnungsr{\"a}ume integrieren}, publisher = {FH Aachen}, address = {Aachen}, pages = {83 Seiten}, year = {2023}, abstract = {RƎURB (Reurbanization \& Renewable Energy) ist ein Konzept zur Integration von erneuerbaren Energien in einen urbanen Begegnungsraum. Es beinhaltet das Design eines skulpturalen Kleinwindkraftwerks und eines Solar-Pavillons mit einer Sitzlandschaft f{\"u}r einen energieautarken, {\"o}ffentlichen Platz. Durch die Integration eines W-LAN Hotspots und Ladem{\"o}glichkeiten in der Sitzlandschaft bringt RƎURB nicht nur gr{\"u}nen Strom in die Stadt, sondern gew{\"a}hrleistet der Bev{\"o}lkerung auch Zugang zur Digitalisierung und einen kostenlosen Arbeitsraum. Windturbine: Herk{\"o}mmliche Windr{\"a}der k{\"o}nnen in der Stadt nicht genutzt werden. Die RƎURB-Winds{\"a}ule ist darauf spezialisiert, die urbanen Winde aus allen Richtungen aufzunehmen und funktioniert schon bei einem leichten Windstoß. Durch das elegante Design lassen sich die Technologien als {\"a}sthetischen Blickfang in das moderne Stadtbild integrieren.}, language = {de} } @masterthesis{Hatke2023, type = {Bachelor Thesis}, author = {Hatke, Lars}, title = {X Plore: human hybrid submarine}, publisher = {FH Aachen}, address = {Aachen}, pages = {153 Seiten}, year = {2023}, abstract = {Das „X Plore" ist ein human hybrid angetriebenes Tauchboot, welches sowohl f{\"u}r den touristischen als auch privaten Gebrauch konzipiert ist. Das immersive Design des „X Plore" sorgt f{\"u}r ein eindrucksvolles Taucherlebnis. Das Konzept soll die Menschen {\"u}ber die aktuelle Not der Meere und ihrer Lebewesen aufkl{\"a}ren und ihnen gleichzeitig die M{\"o}glichkeit geben, der Unterwasserwelt n{\"a}her zukommen. Zudem soll es diese erhalten und ihre Bewohner:innen sch{\"u}tzen. Des Weiteren thematisiert die Arbeit zukunftsorientierte Antriebs- und Batterietechniken und setzt sich mit der sinnvollen Integrierung dieser auseinander.}, language = {de} } @masterthesis{Herrmann2023, type = {Bachelor Thesis}, author = {Herrmann, Luna}, title = {Blind Shopping}, publisher = {FH Aachen}, address = {Aachen}, pages = {104 Seiten}, year = {2023}, abstract = {Das Einkaufen in Einkaufszentren oder Ladenstraßen ist f{\"u}r Menschen ohne Sehbehinderung eine selbstverst{\"a}ndliche T{\"a}tigkeit. F{\"u}r Menschen mit Sehbehinderung gibt es bis heute keine M{\"o}glichkeit, sich ohne Hilfe von Familienmitgliedern, Freund:innen oder Pflegepersonal in einem Einkaufszentrum zurechtzufinden. Genau dieses Problem l{\"o}st "NAVON.". Er ist ein intelligenter und smarter Blindenstock, welcher durch Ultraschalldistanzsensoren fr{\"u}hzeitig Hindernisse erkennt und die M{\"o}glichkeit bietet, den Betroffenen durch das Einkaufszentrum zu lotsen. Die Logik des Systems liegt innerhalb des Handgriffs, welcher die wichtigsten Einstellungen bzgl. Sprache und haptischer Bedienelemente steuert. Ebenfalls gibt er dem Betroffenen auch ein haptisches Feedback, um Hindernisse fr{\"u}hzeitig umgehen zu k{\"o}nnen. "NAVON." ist ein wichtiger Ansatz f{\"u}r eine neue Kategorie von Produkten und Blindenst{\"o}cken. Dar{\"u}ber hinaus birgt das Konzept auch weitere Potenziale f{\"u}r {\"o}ffentliche Geb{\"a}ude ({\"A}mter, Krankenh{\"a}user, etc..).}, language = {de} } @masterthesis{Lorse2023, type = {Bachelor Thesis}, author = {Lorse, Hannah}, title = {Gem{\"u}sevolle Aussichten : eine bunte Sammlung essbarer Pflanzenteile}, publisher = {FH Aachen}, address = {Aachen}, pages = {92 Seiten}, year = {2023}, abstract = {Die Bachelorarbeit „Gem{\"u}sevolle Aussichten" / „Eine bunte Sammlung essbarer Pflanzenteile" umfasst eine illustrative Auseinandersetzung, bunte Sammlung essbarer Pflanzenteile (Gem{\"u}se). Mit ihr entsteht ein visueller Anreiz, sich mehr mit dem gesunden Nahrungsmittel auseinanderzusetzen. Viele Kinder sowie Erwachsene kennen viele Gem{\"u}sesorten {\"u}berhaupt nicht, Gem{\"u}se wie z. B. Schwarzwurzeln, Pastinaken oder gar Fenchel ist oftmals wenig bekannt. Mit der Arbeit wird ein informeller, illustrativer {\"U}berblick {\"u}ber Gem{\"u}se geschaffen, um zum Beispiel auch {\"u}ber die Inhaltsstoffe zu informieren. Denn viele wissen gar nicht, was eigentlich in dem wertvollen Nahrungsmitteln steckt, wie gut ein regelm{\"a}ßiger Konsum von Gem{\"u}se eigentlich f{\"u}r uns ist. Dabei hat der t{\"a}gliche Konsum von verschiedenen Gem{\"u}sesorten nicht nur eine Auswirkung auf die k{\"o}rperliche sondern auch auf die mentale Gesundheit. Viele Gem{\"u}sesorten beinhalten bestimmte Vitamine oder weitere Inhaltsstoffe, die sich positiv auf unsere Psyche auswirken und dazu beitragen, zum Bespiel einen depressiven Zustand zu verbessern. Auch die Umwelt kann von einem h{\"a}ufigeren Konsum von Gem{\"u}se anstatt Fleisch profitieren. Denn bei der Produktion von Fleisch entsteht viel mehr Kohlenstoffdioxid als bei der Produktion von Gem{\"u}se. Auch der Anteil des virtuellen Wassers ist bei der Produktion von Fleisch viel h{\"o}her. Das Projekt besteht aus einem fadengebundenen Hardcover-Buch und einer Poster-Serie. Zu Beginn der Arbeit wird eine allgemeine Einleitung in das Thema Gem{\"u}se gegeben. Im folgenden Hauptteil werden verschiedene Gem{\"u}segruppen und einige der zugeh{\"o}rigen Sorten visuell und informativ erkl{\"a}rt. Bei der Poster-Serie wurden die sechs Hauptfarben, die jeweiligen Gem{\"u}seillustrationen separiert und im Stil der Arbeit nummeriert benannt. Mit dem Projekt soll die Unwissenheit {\"u}ber viele Gem{\"u}sesorten gesenkt und der Konsum von weniger Fleisch und mehr Gem{\"u}se angeregt werden.}, language = {de} } @masterthesis{Martinez2023, type = {Bachelor Thesis}, author = {Martinez, Mariana}, title = {The Taste of Memories : a recipe book of memories}, publisher = {FH Aachen}, address = {Aachen}, pages = {110 Seiten}, year = {2023}, abstract = {What does the word 'home' means and at what age do we give it meaning? Many of us grew up in one, in a home that our parents, grandparents, aunts, uncles and relatives shaped. Who, as we grew up, taught us about the world from their perspective as we interpreted and saw it for the first time and with it, its colors, its smells, its tastes, its sounds, its dances, and its languages. When we migrate, we take all that with us, like a piece of luggage that was stored in some corner inside a lung, or inside the memory in a heart's artery. And then you arrive in this new world, which we were told was the Old World, with other colors, other flavors, other words, in which yours no longer make sense. And you try to connect with all your senses, but, above all, we try to belong, because we belonged all our lives to something, to someone, to some place where we learned to be. When we migrate, without saying, we go through the grieve that comes with the beautiful discomfort of leaving everything we once knew. We mourn, because we can't go to lunch at our grandmas on Sundays, or have mom bring us soup when we are sick, or the Christmas meals and celebrations that we like so much, or that special dish that was made for us on our birthdays or on a family BBQ on a Sunday or a holiday. I wonder if emotions come inside us through the taste and respiratory track, if it is that we breathe life, and with that what we love finds its ways inside and finds its corner somewhere in the body. If what we have loved and what we have lived hides somewhere in our body, I doubtlessly think it came in through one of our senses, and in this attempt at my first illustrated book I'll share which, I think, are the senses through which at first instance part of what we perceive as cultural identity enters.}, language = {de} } @masterthesis{Merkel2023, type = {Bachelor Thesis}, author = {Merkel, Tobias}, title = {Unterst{\"u}tzung f{\"u}r Familien : barrierearme Inanspruchnahme von Sozialleistungen f{\"u}r Familien und Kinder}, publisher = {FH Aachen}, address = {Aachen}, pages = {199 Seiten}, year = {2023}, abstract = {Familienbezogene Sozialleistungen sind wichtige Bestandteile eines Sozialstaats: Nicht nur helfen sie Kindern und Familien bei der Bew{\"a}ltigung ihres Alltags, vielmehr sichern sie ein ̈w{\"u}rdevolles Zusammenleben, gleichen in Teilen soziale Unterschiede aus und korrigieren ungleiche Startchancen. Chancengleichheit ist kein triviales Thema: Eine Gesellschaft, die auf sozialen Grundpfeilern aufbaut, muss st{\"a}ndig die Umsetzung dieses eigenen Anspruchs bewerten. Finanzielle Mittel, die deswegen angeboten werden, sind nur dann wirksam, wenn sie Betroffene erreichen. 
Die Nicht-Inanspruchnahme von Sozialleistungen ist ein komplexes Problem. Als Ursache wird gemeinhin die Attraktivit{\"a}t der Leistungen genannt. Vielfach sind aber die Kommunikation und die Informationsbeschaffung entscheidende Faktoren, warum Hilfe ungenutzt bleibt. In dem Projekt ist demgem{\"a}ß zu er{\"o}rtern, wie {\"u}ber zeitgem{\"a}ße digitale Instrumente das Angebot und die Leistungen der Familienkasse zug{\"a}nglich, barrierearm und intuitiv gestaltet werden k{\"o}nnen.}, language = {de} } @masterthesis{Outkina2023, type = {Bachelor Thesis}, author = {Outkina, Ioulia}, title = {Kassandra : wetterbedingte Extremereignisse werden zunehmend die neue Realit{\"a}t bestimmen}, publisher = {FH Aachen}, address = {Aachen}, pages = {253 Seiten}, year = {2023}, abstract = {Wetterbedingte Extremereignisse nehmen mit dem Klimawandel in vielen Regionen der Welt an Intensit{\"a}t und H{\"a}ufigkeit zu. Immer wieder unterstreichen tragische Krisenvorf{\"a}lle die Notwendigkeit der Aufkl{\"a}rung im Nachgang. Doch ausgerechnet wenn sich Leute {\"u}ber eins der aktuellsten und schwerwiegendsten Themen unserer heutigen Zeit informieren wollen, wird es daf{\"u}r keinen konsistenten Kanal in Deutschland geben. Kassandra bietet die M{\"o}glichkeit, sich verst{\"a}ndlich mit den Ereignissen und Missst{\"a}nden sachlich im Krisenbereich auseinanderzusetzen. Transparenz und Seriosit{\"a}t sind Schwerpunkte im qualitativ hochwertigen Bereich, die dabei von Wichtigkeit sind. Mit den Prinzipien des investigativen Journalismus schafft Kassandra als Onlineformat einen Denkanstoß, wie im Bereich der Krisenkommunikation eine Verbesserung stattfinden kann.}, language = {de} } @masterthesis{Palm2023, type = {Bachelor Thesis}, author = {Palm, Kevin John}, title = {Viva sin Aqua : Konzeption einer Kampagne zum virtuellen Wasserbedarf}, publisher = {FH Aachen}, address = {Aachen}, pages = {80 Seiten}, year = {2023}, abstract = {Den aktuellen Zustand unserer Welt positiv zu beeinflussen, ist ein {\"u}bergeordnetes Ziel, welches nur kollektiv als Gesellschaft erreicht werden kann. Das Einsparen von Ressourcen ist ein leichter Weg f{\"u}r jede einzelne Person, um ihren Beitrag f{\"u}r dieses Ziel zu leisten. Doch wie bewegt man die Bev{\"o}lkerung zum Sparen? Und was soll eingespart werden? Die Kampagne "Viva sin Agua" sensibilisiert f{\"u}r die Ressource Wasser und nutzt dabei den {\"o}ffentlichen Raum. Aufgekl{\"a}rt wird {\"u}ber das sogenannte virtuelle Wasser. Dieses f{\"a}llt in teilweise extremen Mengen f{\"u}r die Produktion jeglicher Konsumwaren an. Das Ziel der Kampagne ist das Kennzeichnen dieses Wasserverbrauchs direkt am Produkt {\"u}ber eigene Labels. Dadurch soll ein Bewusstsein f{\"u}r den kritischen Kontext geschaffen und das allgemeine Konsumverhalten nachhaltig ver{\"a}ndert werden.}, language = {de} } @article{BialonskiGrieger2023, author = {Bialonski, Stephan and Grieger, Niklas}, title = {Der KI-Chatbot ChatGPT: Eine Herausforderung f{\"u}r die Hochschulen}, series = {Die neue Hochschule}, volume = {2023}, journal = {Die neue Hochschule}, number = {1}, publisher = {HLB}, address = {Bonn}, issn = {0340-448X}, doi = {10.5281/zenodo.7533758}, pages = {24 -- 27}, year = {2023}, abstract = {Essays, Gedichte, Programmcode: ChatGPT generiert automatisch Texte auf bisher unerreicht hohem Niveau. Dieses und nachfolgende Systeme werden nicht nur die akademische Welt nachhaltig ver{\"a}ndern.}, language = {de} } @masterthesis{Fleissner2023, type = {Bachelor Thesis}, author = {Fleißner, Annette Michaela}, title = {Niemals gut genug : Narzissmus bei Frauen in der Mutter-Tochter-Beziehung}, publisher = {FH Aachen}, address = {Aachen}, pages = {185 Seiten}, year = {2023}, abstract = {Narzissmus ist ein vielgenutzter Begriff. H{\"a}ufig wird er im Kontext toxischer Beziehungen verwendet. Nur selten wird das Leben von Frauen thematisiert, deren Mutter narzisstisch ist. Die Graphic Novel „Niemals gut genug" leistet einen Beitrag zu diesem wenig beachteten Thema. „Niemals gut genug" schildert anhand von illustrierten Kurzgeschichten allt{\"a}gliche Situationen von T{\"o}chtern narzisstischer M{\"u}tter. Die Kurzgeschichten ber{\"u}cksichtigen die Vielfalt narzisstischer Pers{\"o}nlichkeitsst{\"o}rungen und werfen ein Schlaglicht auf die Vergangenheit narzisstischer M{\"u}tter. Dadurch r{\"u}ckt auch die transgenerationale Weitergabe von Narzissmus in den Fokus. „Niemals gut genug" stellt einen einf{\"u}hlsamen Zugang zu diesem sensiblen Thema dar und hilft dadurch Betroffenen beim Verstehen und Genesen.}, language = {de} } @masterthesis{Heindrichs2023, type = {Bachelor Thesis}, author = {Heindrichs, Maik}, title = {Intrinsic Motion in Type : eine Bewegtbild Plakatreihe f{\"u}r das D{\"u}sseldorfer Schauspielhaus}, publisher = {FH Aachen}, address = {Aachen}, pages = {53 Seiten}, year = {2023}, abstract = {Gestaltung und Programmierung dynamischer Motion-Design Plakate zwecks Kommunikation der Theaterst{\"u}cke des D{\"u}sseldorfer Schauspielhauses. Der Fokus liegt dabei auf der Typografie und ihrer intrinsischen Bewegung. Der technische Fortschritt bietet viele neue M{\"o}glichkeiten im Umgang mit Schrift. Diese Arbeit dient dazu, mithilfe von aktuellen Techniken einen neuen Ansatz im Bereich Gestaltung mit Schrift, sowie Variable Fonts, in Kombination mit Motion-Design aufzuzeigen. Dies wird anhand von Eigenschaften der Schrift und der inhaltlichen Ebene, ohne die Buchstaben dabei zu dekonstruieren, umgesetzt. Die Bewegungen werden dann in das Format Plakat {\"u}bertragen und dargestellt.}, language = {de} } @book{DrummScheuermannWeidner2023, author = {Drumm, Christian and Scheuermann, Bernd and Weidner, Stefan}, title = {Einstieg in SAP S/4HANA® : Gesch{\"a}ftsprozesse, Anwendungen, Zusammenh{\"a}nge - Erkl{\"a}rt am Beispielunternehmen Global Bike}, publisher = {Rheinwerk Verlag}, address = {Bonn}, isbn = {9783836281560 (Print)}, pages = {587 Seiten}, year = {2023}, abstract = {Dieser verst{\"a}ndliche Einstieg in SAP S/4HANA f{\"u}hrt Sie anhand des Beispielunternehmens Global Bike durch die zentralen Abl{\"a}ufe in Vertrieb, Einkauf, Rechnungswesen, Produktion und Lagerverwaltung. Sie werden mit den betriebswirtschaftlichen Grundlagen, den relevanten Organisationsstrukturen und Stammdaten sowie den Prozessen vertraut gemacht. Mithilfe von Praxisbeispielen und Fallstudien sind Sie schon bald SAP-S/4HANA-Profi - f{\"u}r mehr Erfolg in Studium und Beruf!}, language = {de} } @article{ŠakićMarinkovićButenwegetal.2023, author = {Šakić, Bogdan and Marinković, Marko and Butenweg, Christoph and Klinkel, Sven}, title = {Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls}, series = {Engineering Structures}, volume = {276}, journal = {Engineering Structures}, editor = {Yang, J.}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0141-0296}, doi = {10.1016/j.engstruct.2022.115342}, year = {2023}, abstract = {Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural elements. Therefore, their behaviour under earthquake loading in out-of-plane (OOP) direction is investigated by several researches in the past years. However, none of the existing experimental campaigns or analytical approaches consider the influence of prior slab deflection on OOP response of partition walls. Moreover, none of the existing construction techniques for the connection of partition walls with surrounding reinforced concrete (RC) is investigated for the combined slab deflection and OOP loading. However, the inevitable time-dependent behaviour of RC slabs leads to high values of final slab deflections which can further influence boundary conditions of partition walls. Therefore, a comprehensive study on the influence of slab deflection on the OOP capacity of masonry partitions is conducted. In the first step, experimental tests are carried out. Results of experimental tests are further used for the calibration of the numerical model employed for a parametric study. Based on the results, behaviour under combined loading for different construction techniques is explained. The results show that slab deflection leads either to severe damage or to a high reduction of OOP capacity. Existing practical solutions do not account for these effects. In this contribution, recommendations to overcome the problems of combined slab deflection and OOP loading on masonry partition walls are given. Possible interaction of in-plane (IP) loading, with the combined slab deflection and OOP loading on partition walls, is not investigated in this study.}, language = {en} } @masterthesis{Koch2023, type = {Bachelor Thesis}, author = {Koch, Greta}, title = {Eine monothematische Publikation zum Thema "Zeit"}, publisher = {FH Aachen}, address = {Aachen}, pages = {56 Seiten}, year = {2023}, abstract = {Zeit spielt in unser aller Leben eine allgegenw{\"a}rtige Rolle. Sie ist immer da, war schon immer da und nimmt ihren Lauf, ganz egal was wir tun. Aber was macht die Zeit und was hat sie f{\"u}r einen Einfluss auf uns? Ist sie unsere st{\"a}ndige Begleiterin oder unsere »Gegnerin«? Wie unterschiedlich wir auf Zeit blicken k{\"o}nnen, was sie bewirkt und wie unser Umgang mit ihr das Leben beeinflusst, zeigt die Reihe an monothematischen Magazinen »about time«. Das Thema wird aus unterschiedlichsten Blickwinkeln beleuchtet und soll so eine gewisse Sensibilit{\"a}t f{\"u}r den Umgang mit der eigenen Zeit schaffen — denn sie ist am Ende das Wertvollste, das bleibt.}, language = {de} } @inproceedings{ThomaStiemerBraunetal.2023, author = {Thoma, Andreas and Stiemer, Luc and Braun, Carsten and Fisher, Alex and Gardi, Alessandro G.}, title = {Potential of hybrid neural network local path planner for small UAV in urban environments}, series = {AIAA SCITECH 2023 Forum}, booktitle = {AIAA SCITECH 2023 Forum}, publisher = {AIAA}, address = {Reston, Va.}, doi = {10.2514/6.2023-2359}, pages = {13 Seiten}, year = {2023}, abstract = {This work proposes a hybrid algorithm combining an Artificial Neural Network (ANN) with a conventional local path planner to navigate UAVs efficiently in various unknown urban environments. The proposed method of a Hybrid Artificial Neural Network Avoidance System is called HANNAS. The ANN analyses a video stream and classifies the current environment. This information about the current Environment is used to set several control parameters of a conventional local path planner, the 3DVFH*. The local path planner then plans the path toward a specific goal point based on distance data from a depth camera. We trained and tested a state-of-the-art image segmentation algorithm, PP-LiteSeg. The proposed HANNAS method reaches a failure probability of 17\%, which is less than half the failure probability of the baseline and around half the failure probability of an improved, bio-inspired version of the 3DVFH*. The proposed HANNAS method does not show any disadvantages regarding flight time or flight distance.}, language = {en} } @masterthesis{Kouchev2023, type = {Bachelor Thesis}, author = {Kouchev, Veronique}, title = {Shiba Moments : 2D Adventure Story Game}, publisher = {FH Aachen}, address = {Aachen}, pages = {79 Seiten}, year = {2023}, abstract = {Shiba Moments ist ein 2D-Top-Down-Abenteuer Story-Spiel {\"u}ber die Wertsch{\"a}tzung der Zeit, die wir mit unseren Haustieren verbringen. Als Hundebesitzerin Conny wandert der / die Spieler:in durch eine Shiba-Traumwelt, die vergangene Momente mit ihrem Hund assoziieren und sich mit eigenen seltsamen Tr{\"a}umen vermischen. Die Spieler:innen erwartet eine Geschichte voller Emotionen, dunklem Humor und verr{\"u}ckter Ereignisse!}, language = {de} } @masterthesis{Kreutz2023, type = {Bachelor Thesis}, author = {Kreutz, Delayne Sara}, title = {Auf links gedreht : eine informative Auseinandersetzung mit der Benachteiligung durch Linksh{\"a}ndigkeit}, publisher = {FH Aachen}, address = {Aachen}, pages = {138 Seiten}, year = {2023}, abstract = {Unsere Welt funktioniert seit jeher v{\"o}llig rechtsorientiert. Rechtsh{\"a}ndigkeit stellt die Norm dar, w{\"a}hrend Linksh{\"a}ndigkeit eine Besonderheit ist - ein Ph{\"a}nomen, oder gar eine Kuriosit{\"a}t, welche im Laufe der Menschheitsgeschichte bei Weitem nicht so akzeptiert wurde wie in der Gegenwart. Das Buch „Auf links gedreht" thematisiert die Wahrnehmung der linken Seite in der Vergangenheit und sensibilisiert f{\"u}r die Probleme von Linksh{\"a}nder:innen in der heutigen Zeit. Ein Buch, fernab der Norm, mit einer Gestaltung ausgelegt auf die Linksh{\"a}ndigkeit. Es f{\"u}hrt Rechtsh{\"a}nder:innen die Problematik vor Augen. So wird sich nicht nur inhaltlich f{\"u}r eine h{\"a}ndigkeitsneutrale Gestaltung eingesetzt. Ein Buch {\"u}ber die linke Hand, gestaltet f{\"u}r die linke Hand.}, language = {de} } @masterthesis{KruegerStupp2023, type = {Bachelor Thesis}, author = {Kr{\"u}ger, Niklas and Stupp, Anna-Lena}, title = {Raubgut : Zusammenf{\"u}hrung der in Deutschland befindlichen Objekte aus dem ehemaligen K{\"o}nigreich Benin}, publisher = {FH Aachen}, address = {Aachen}, pages = {83 Seiten}, year = {2023}, abstract = {Die Benin-Objekte wurden vor 126 Jahren durch britische Kolonialm{\"a}chte aus ihrer Heimat geraubt. Sie wurden {\"u}ber die ganze Welt verstreut und ca. 1500 St{\"u}cke landeten auch in deutschen Museen. Bei den Objekten handelt es sich um das kulturelle Erbe und das Nationalarchiv eines Volkes. In „Raubgut" finden die Leser:innen eine Zusammenf{\"u}hrung aller Objekte, die sich in deutschen Museen befinden. „Raubgut" ist das Ergebnis einer umfangreichen Recherche, in der die erste Zusammenf{\"u}hrung auf bildlicher Ebene in einem Bildarchiv, auf textlicher Ebene u. a. in einer einzigartigen Inventarliste sowie in Texten zum ehemaligen K{\"o}nigreich, dem Kolonialismus und weiteren Themen gegeben ist. Nach all den Jahren wurde am 01. Juli 2022 die vollst{\"a}ndige Eigentums{\"u}bertragung an Nigeria beschlossen. Ob das nun der Grundstein f{\"u}r die Entwicklung der Restitutionsdebatte war, wird sich in Zukunft zeigen.}, language = {de} } @masterthesis{Laschet2023, type = {Bachelor Thesis}, author = {Laschet, Kimberly}, title = {Berufsbegleitende Bildungsplattform f{\"u}r Designer : Lebenslanges Lernen f{\"u}r alle.}, publisher = {FH Aachen}, address = {Aachen}, pages = {159 Seiten}, year = {2023}, abstract = {Academia ist eine berufsbegleitende Bildungsplattform f{\"u}r Designer:innen. Die Mission der Plattform ist es, Designer:innen w{\"a}hrend ihres kreativen Ausbildungsweges und auch lange nach ihrem Berufseinstieg zu begleiten und zu unterst{\"u}tzen. Durch Videokurse, Online-Lehrveranstaltungen, etwa Gruppenseminare, Design Talks und Challenges sollen Nutzer:innen passend auf ihre Interessen und ihrem Niveau entsprechend gef{\"o}rdert werden. Academias Fokus liegt auf eine nachhaltige Weiterentwicklung der F{\"a}higkeiten und der fachlichen Expertise.}, language = {de} } @inproceedings{ChircuCzarneckiFriedmannetal.2023, author = {Chircu, Alina and Czarnecki, Christian and Friedmann, Daniel and Pomaskow, Johanna and Sultanow, Eldar}, title = {Towards a Digital Twin of Society}, series = {Proceedings of the 56th Hawaii International Conference on System Sciences 2023}, booktitle = {Proceedings of the 56th Hawaii International Conference on System Sciences 2023}, publisher = {University of Hawai'i}, address = {Honolulu}, isbn = {978-0-9981331-6-4}, pages = {6748 -- 6757}, year = {2023}, abstract = {This paper describes the potential for developing a digital twin of society- a dynamic model that can be used to observe, analyze, and predict the evolution of various societal aspects. Such a digital twin can help governmental agencies and policy makers in interpreting trends, understanding challenges, and making decisions regarding investments or policies necessary to support societal development and ensure future prosperity. The paper reviews related work regarding the digital twin paradigm and its applications. The paper presents a motivating case study- an analysis of opportunities and challenges faced by the German federal employment agency, Bundesagentur f¨ur Arbeit (BA), proposes solutions using digital twins, and describes initial proofs of concept for such solutions.}, language = {en} } @masterthesis{Vogt2023, type = {Bachelor Thesis}, author = {Vogt, Linda}, title = {Bambus als Baumaterial : eine nachhaltige Alternative zu herk{\"o}mmlichen Rohstoffen?}, publisher = {FH Aachen}, address = {Aachen}, pages = {132 Seiten}, year = {2023}, abstract = {"Das Editorial greift die Thematik der aktuellen Klimakrise auf und beleuchtet diese im Bereich des nachhaltigen Bauens. Denn durch das stetige Wachstum der menschlichen Bev{\"o}lkerung in Kombination mit dem Anstieg des Pro-Kopf-Verbrauchs werden globale Ressourcen immer st{\"a}rker belastet. Ziel der Arbeit ist es, die aktuelle Situation des Klimawandels aus einer Perspektive zu betrachten, der sich die meisten nicht bewusst sind. Denn besonders das Bauwesen tr{\"a}gt einen erheblichen Anteil zum Klimawandel bei. In der Publikation werden Texte zum Thema Klimawandel und nachhaltiges Bauen behandelt sowie fotografische Anwendungsbeispiele im Bereich der Bambus-Architektur gezeigt. Das Projekt pr{\"a}sentiert L{\"o}sungsans{\"a}tze, wie herk{\"o}mmliche Rohstoffe durch verarbeiteten Bambus erg{\"a}nzt bzw. ersetzt werden k{\"o}nnen. Dadurch kann ein entscheidender Beitrag zur Bek{\"a}mpfung des Klimawandels geleistet werden. Bambus bietet dahingehend viele M{\"o}glichkeiten. Bei richtiger Verarbeitung vereint er viele der geforderten Anspr{\"u}che nachhaltigen Bauens. Der Rohstoff ist stark und flexibel zugleich. Er bindet Kohlenstoff, reinigt kontaminierte B{\"o}den, beugt Erosionen vor und weist eine nahezu negative CO2-Bilanz auf. Wie kann es gelingen, diesen Rohstoff in westlichen L{\"a}ndern als Baumaterial zu integrieren?"}, language = {de} } @masterthesis{Westhoff2023, type = {Bachelor Thesis}, author = {Westhoff, Katharina}, title = {Fensterleben : eine Sammlung {\"u}ber das Treffen von privatem und {\"o}ffentlichem Leben}, publisher = {FH Aachen}, address = {Aachen}, pages = {140 Seiten}, year = {2023}, abstract = {Im Projekt „Fensterleben" werden Alltagsgeschichten, die sich vor und in einer Erdgeschosswohnung abspielen, graphisch als Videos aufbereitet. In einer mehrteiligen Serie werden die Eindr{\"u}cke und Perspektiven auf „B{\"u}rgersteig-Geschehnisse" und was hinter den Fenstern passiert, veranschaulicht. Besonderes Interesse gilt dem Zusammenspiel von privatem und {\"o}ffentlichem Raum: was wurde zwischen Fensterbank und B{\"u}rgersteig ausgetauscht und weitergegeben.}, language = {de} } @masterthesis{Williams2023, type = {Bachelor Thesis}, author = {Williams, Vivian}, title = {Entwicklung eines neuen Erscheinungsbildes f{\"u}r Die Staatliche Antikensammlung in M{\"u}nchen}, publisher = {FH Aachen}, address = {Aachen}, pages = {111 Seiten}, year = {2023}, abstract = {Die Staatliche Antikensammlung in M{\"u}nchen ist eine antike Kunstsammlung, bestehend aus zwei Kunsth{\"a}usern. Das Haus der Glyptothek befindet sich auf der Nordseite und die Antikensammlung auf der S{\"u}dseite des K{\"o}nigsplatzes. W{\"a}hrend die Glyptothek Skulpturen ausstellt, zeigt die Antikensammlung Gebrauchsgegenst{\"a}nde und Objekte aus der etruskischen, griechischen und r{\"o}mischen Epoche. Sie geh{\"o}rt mit ihrer Kunstsammlung zu den weltweit f{\"u}hrenden ihrer Art. In seinem Vorhaben, das Kulturerbe zu wahren, legt das Museum besonders hohen Wert auf Bildung und Vermittlung. Um dies langfristig zu gew{\"a}hrleisten, ist ein ausgeglichenes Erscheinungsbild zwischen Klassik und Modernit{\"a}t unentbehrlich. Die griechische Stilepoche zeichnet sich in ihrer abstrakten Nutzung von geometrischen Grundformen aus. Im Zusammenspiel von geometrischen Formen und Abstrahierungen entsteht ein neues Erscheinungsbild.}, language = {de} } @misc{Benavides2023, type = {Master Thesis}, author = {Benavides, Lucie}, title = {INKAS : User Experience und User Interface einer bestehenden CPQ-Webanwendung zur Erstellung von Konfiguratoren f{\"u}r variantenreiche Produkte.}, publisher = {FH Aachen}, address = {Aachen}, pages = {191 Seiten}, year = {2023}, abstract = {Im Rahmen dieser Masterarbeit wird die komplexe CPQ-Branchenl{\"o}sung INKAS der it-motive AG konzeptionell und gestalterisch {\"u}berarbeitet. Die mehrj{\"a}hrige Entwicklung von INKAS und etlicher separater Komponenten hat zu einer zum Teil inkonsistenten Oberfl{\"a}che gef{\"u}hrt, die Schwierigkeiten bei der Benutzung aufweist. Das neue User Interface, welches diese Masterarbeit entwickelt, soll durch einheitliche Interaktionsprinzipien zum einen die Usability und bestehende Funktionalit{\"a}ten verbessern und zum anderen neue Funktionen leichter integrierbar machen. Diese Masterarbeit demonstriert somit ein Vorgehensmodell, durch welches komplexe existierende Branchenl{\"o}sungen mithilfe eines nutzerzentrierten Redesigns eine nachhaltig verbesserte Produktqualit{\"a}t erreichen und die Integration neuer Technologien erm{\"o}glicht. In diesem Zusammenhang wird auch exemplarisch aufgezeigt, wie Designleistungen methodisch in bestehende agile Softwareentwicklungsprozesse integriert werden k{\"o}nnen.}, language = {de} } @article{Gaigall2023, author = {Gaigall, Daniel}, title = {Allocating and forecasting changes in risk}, series = {Journal of risk}, volume = {25}, journal = {Journal of risk}, number = {3}, editor = {AitSahlia, Farid}, publisher = {Infopro Digital Risk}, address = {London}, issn = {1755-2842}, doi = {10.21314/JOR.2022.048}, pages = {1 -- 24}, year = {2023}, abstract = {We consider time-dependent portfolios and discuss the allocation of changes in the risk of a portfolio to changes in the portfolio's components. For this purpose we adopt established allocation principles. We also use our approach to obtain forecasts for changes in the risk of the portfolio's components. To put the approach into practice we present an implementation based on the output of a simulation. Allocation is illustrated with an example portfolio in the context of Solvency II. The quality of the forecasts is investigated with an empirical study.}, language = {en} }