@article{PoghossianGeisslerSchoening2019,
  author    = {Poghossian, Arshak and Geissler, Hanno and Sch{\"o}ning, Michael Josef},
  title     = {Rapid methods and sensors for milk quality monitoring and spoilage detection},
  series = {Biosensors and Bioelectronics},
  volume    = {140},
  journal   = {Biosensors and Bioelectronics},
  number    = {Article 111272},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2019.04.040},
  year      = {2019},
  language  = {en}
}
@book{Weigand2019,
  author    = {Weigand, Christoph},
  title     = {Statistik mit und ohne Zufall : Eine anwendungsorientierte Einf{\"u}hrung},
  edition   = {3. Aufl.},
  publisher = {Springer Spektrum},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-662-59309-7},
  doi       = {10.1007/978-3-662-59309-7},
  pages     = {499 S.},
  year      = {2019},
  language  = {de}
}
@inproceedings{WolfBartonHerrmannetal.2019,
  author    = {Wolf, Martin R. and Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  title     = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule f{\"u}r Angewandte Wissenschaften Aachen / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  doi       = {10.15771/978-3-944330-62-4},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-13026},
  pages     = {261 Seiten},
  year      = {2019},
  abstract  = {Tagungsbeitr{\"a}ge aus den Bereichen Projektmanagement, Didaktik in der Wirtschaftsinformatik, IT-Sicherheit, Anwendungsf{\"a}lle, Reifegradmodelle, Plattformen f{\"u}r Gesch{\"a}ftsprozesse und Prototypen.},
  language  = {de}
}
@article{VoegeleRuebbelkeGovorukhaetal.2019,
  author    = {V{\"o}gele, Stefan and R{\"u}bbelke, Dirk and Govorukha, Kristina and Grajewski, Matthias},
  title     = {Socio-technical scenarios for energy-intensive industries: the future of steel production in Germany},
  series = {Climatic Change},
  journal   = {Climatic Change},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0165-0009},
  doi       = {10.1007/s10584-019-02366-0},
  pages     = {1 -- 16},
  year      = {2019},
  language  = {en}
}
@inproceedings{AlhwarinFerreinScholl2019,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Scholl, Ingrid},
  title     = {An Efficient Hashing Algorithm for NN Problem in HD Spaces},
  series = {Lecture Notes in Computer Science},
  booktitle = {Lecture Notes in Computer Science},
  isbn      = {978-303005498-4},
  doi       = {10.1007/978-3-030-05499-1_6},
  pages     = {101 -- 115},
  year      = {2019},
  language  = {en}
}
@article{LeschingerBeschAydinetal.2019,
  author    = {Leschinger, Tim and Besch, Katharina and Aydin, Cansu and Staat, Manfred and Scaal, Martin and M{\"u}ller, Lars Peter and Wegmann, Kilian},
  title     = {Irreparable rotator cuff tears: a biomechanical comparison of superior capsuloligamentous complex reconstruction techniques and an interposition graft technique},
  series = {The Orthopaedic Journal of Sports Medicine},
  volume    = {7},
  journal   = {The Orthopaedic Journal of Sports Medicine},
  number    = {8},
  doi       = {10.1177/2325967119864590},
  pages     = {1 -- 5},
  year      = {2019},
  language  = {en}
}
@phdthesis{Tran2019,
  author    = {Tran, Ngoc Trinh},
  title     = {Limit and Shakedown analysis of structures under stochastic conditions},
  publisher = {Technische Universit{\"a}t Braunschweig},
  address   = {Braunschweig},
  doi       = {10.24355/dbbs.084-201902121135-0},
  pages     = {166 S.},
  year      = {2019},
  language  = {en}
}
@incollection{Martin2019,
  author    = {Martin, Joachim},
  title     = {Bemessung von Baukonstruktionen},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_1},
  pages     = {1 -- 11},
  year      = {2019},
  language  = {de}
}
@incollection{Krause2019,
  author    = {Krause, Thomas},
  title     = {Bauabrechnung und Mengenermittlung},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_5},
  pages     = {101 -- 116},
  year      = {2019},
  language  = {de}
}
@inproceedings{MayBreitbachAlexopoulosetal.2019,
  author    = {May, Martin and Breitbach, Gerd and Alexopoulos, Spiros and Latzke, Markus and B{\"a}umer, Klaus and Uhlig, Ralf and S{\"o}hn, Matthias and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Experimental facility for investigations of wire mesh absorbers for pressurized gases},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117547},
  pages     = {030035-1 -- 030035-9},
  year      = {2019},
  language  = {en}
}
@article{HerrmannSchwarzenbartDittmannGabriel2019,
  author    = {Herrmann, Ulf and Schwarzenbart, Marc and Dittmann-Gabriel, S{\"o}ren},
  title     = {Speicher statt Kohle. Integration thermischer Stromspeicher in vorhandene Kraftwerksstandorte},
  series = {BWK : Das Energie-Fachmagazin},
  volume    = {71},
  journal   = {BWK : Das Energie-Fachmagazin},
  number    = {4},
  publisher = {Springer-VDI-Verl.},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4883},
  pages     = {42 -- 45},
  year      = {2019},
  language  = {de}
}
@inproceedings{SchwagerTeixeiraBouraFleschetal.2019,
  author    = {Schwager, Christian and Teixeira Boura, Cristiano Jos{\´e} and Flesch, Robert and Alexopoulos, Spiros and Herrmann, Ulf},
  title     = {Improved efficiency prediction of a molten salt receiver based on dynamic cloud passage simulation},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  number    = {1},
  isbn      = {978-0-7354-1866-0},
  doi       = {10.1063/1.5117566},
  pages     = {030054-1 -- 030054-8},
  year      = {2019},
  language  = {en}
}
@article{RuppHandschuhRiekeetal.2019,
  author    = {Rupp, Matthias and Handschuh, Nils and Rieke, Christian and Kuperjans, Isabel},
  title     = {Contribution of country-specific electricity mix and charging time to environmental impact of battery electric vehicles: A case study of electric buses in Germany},
  series = {Applied Energy},
  volume    = {237},
  journal   = {Applied Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0306-2619},
  doi       = {10.1016/j.apenergy.2019.01.059},
  pages     = {618 -- 634},
  year      = {2019},
  language  = {en}
}
@inproceedings{MollKoehlerWolf2019,
  author    = {Moll, Florian and K{\"o}hler, Klemens and Wolf, Martin R.},
  title     = {Konzeption von IT-Sicherheitsl{\"o}sungen unter ethischen Gesichtspunkten am Beispiel einer Monitoring-App f{\"u}r mobile Endger{\"a}te},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  pages     = {61 -- 72},
  year      = {2019},
  abstract  = {Die steigende Popularit{\"a}t von mobilen Endger{\"a}ten im privaten und gesch{\"a}ftlichen Umfeld geht mit einem Anstieg an Sicherheitsl{\"u}cken und somit potentiellen Angriffsfl{\"a}chen einher. Als ein Element der technischen und organisatorischen Maßnahmen zum Schutz eines Netzwerkes k{\"o}nnen Monitoring-Apps dienen, die unerw{\"u}nschtes Verhalten und Angriffe erkennen. Die automatisierte {\"U}berwachung von Endger{\"a}ten ist jedoch rechtlich und ethisch komplex. Dies in Kombination mit einer hohen Sensibilit{\"a}t der Nutzer und Nutzerinnen dieser Ger{\"a}te in Bezug auf Privatsph{\"a}re, kann zu einer geringen Akzeptanz und Compliance f{\"u}hren. Eine datenschutzrechtlich und ethisch einwandfreie Konzeption solcher Apps bereits im Designprozess f{\"u}hrt zu h{\"o}herer Akzeptanz und verbessert so die Effizienz. Diese Analyse beschreibt M{\"o}glichkeiten zur Umsetzung.},
  language  = {de}
}
@incollection{Golland2019,
  author    = {Golland, Alexander},
  title     = {Kommentierung von Artikel 94 bis 99 Datenschutz-Grundverordnung},
  series = {DSGVO-BDSG},
  booktitle = {DSGVO-BDSG},
  editor    = {Taeger, J{\"u}rgen and Gabel, Detlev},
  edition   = {3., v{\"o}llig neue bearbeitete und wesentlich erweiterte Auflage},
  publisher = {Fachmedien Recht und Wirtschaft},
  address   = {Frankfurt am Main},
  isbn      = {978-3-8005-1659-9},
  year      = {2019},
  abstract  = {Das Werk kommentiert leicht verst{\"a}ndlich, aktuell und praxisnah die DSGVO wie auch das neue BDSG. Datenverarbeiter erhalten damit eine umfassende Darstellung mit Handlungsempfehlungen zum gesamten neuen Datenschutzrecht.},
  language  = {de}
}
@article{JungStaat2019,
  author    = {Jung, Alexander and Staat, Manfred},
  title     = {Modeling and simulation of human induced pluripotent stem cell-derived cardiac tissue},
  series = {GAMM - Mitteilungen der Gesellschaft f{\"u}r Angewandte Mathematik und Mechanik},
  volume    = {42},
  journal   = {GAMM - Mitteilungen der Gesellschaft f{\"u}r Angewandte Mathematik und Mechanik},
  number    = {4},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1522-2608},
  doi       = {10.1002/gamm.201900002},
  pages     = {11 Seiten},
  year      = {2019},
  language  = {en}
}
@article{BronderPoghossianJessingetal.2019,
  author    = {Bronder, Thomas and Poghossian, Arshak and Jessing, Max P. and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Surface regeneration and reusability of label-free DNA biosensors based on weak polyelectrolyte-modified capacitive field-effect structures},
  series = {Biosensors and Bioelectronics},
  volume    = {126},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2018.11.019},
  pages     = {510 -- 517},
  year      = {2019},
  language  = {en}
}
@article{SchildtBraunMarzocca2019,
  author    = {Schildt, Ph. and Braun, Carsten and Marzocca, P.},
  title     = {Metric evaluating potentials of condition-monitoring approaches for hybrid electric aircraft propulsion systems},
  series = {CEAS Aeronautical Journal},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1869-5590},
  doi       = {10.1007/s13272-019-00411-3},
  pages     = {1 -- 14},
  year      = {2019},
  language  = {en}
}
@inproceedings{ValeroKramerBungetal.2019,
  author    = {Valero, Daniel and Kramer, Matthias and Bung, Daniel Bernhard and Chanson, Hubert},
  title     = {A stochastic bubble generator for air-water flow research},
  series = {E-proceedings of the 38th IAHR World Congress, September 1-6, 2019, Panama City, Panama},
  booktitle = {E-proceedings of the 38th IAHR World Congress, September 1-6, 2019, Panama City, Panama},
  doi       = {10.3850/38WC092019-0909},
  pages     = {5714 -- 5721},
  year      = {2019},
  language  = {en}
}
@article{JayaramanMummidisettyLoeschetal.2019,
  author    = {Jayaraman, Chandrasekaran and Mummidisetty, Chaitanya Krishna and Loesch, Alexandra and Kaur, Sandi and Hoppe-Ludwig, Shenan and Staat, Manfred and Jayaraman, Arun},
  title     = {Postural and metabolic benefits of using a forearm support walker in older adults with impairments},
  series = {Archives of Physical Medicine and Rehabilitation},
  volume    = {Volume 100},
  journal   = {Archives of Physical Medicine and Rehabilitation},
  number    = {Issue 4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0003-9993},
  doi       = {10.1016/j.apmr.2018.10.001},
  pages     = {638 -- 647},
  year      = {2019},
  language  = {en}
}
@inproceedings{Golland2019,
  author    = {Golland, Alexander},
  title     = {Datenschutzregulierung als Eingriff in Wertsch{\"o}pfungsmodelle},
  series = {Die Zukunft der Daten{\"o}konomie : zwischen Gesch{\"a}ftsmodell, Kollektivgut und Verbraucherschutz},
  booktitle = {Die Zukunft der Daten{\"o}konomie : zwischen Gesch{\"a}ftsmodell, Kollektivgut und Verbraucherschutz},
  editor    = {Ochs, Carsten and Friedewald, Michael and Hess, Thomas and Lamla, J{\"o}rn},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  isbn      = {978-3-658-27510-5},
  pages     = {45 -- 68},
  year      = {2019},
  abstract  = {Das Kopplungsverbot verbietet, die Nutzung einer Dienstleistung von der Erteilung einer nicht f{\"u}r die Leistungserbringung erforderlichen Einwilligung abh{\"a}ngig zu machen. Personalisierte Werbung wird hierdurch erheblich erschwert. Anbieter k{\"o}nnen jedoch durch Bereitstellung eines alternativen, einwilligungsfreien Zugangs zu derselben Leistung ihren Dienst datenschutzkonform anbieten. Ein solcher Zugang muss nicht zwingend in Form eines fixen Entgelts gestaltet sein. Vielmehr ist es datenschutzrechtlich in gewissem Umfang zul{\"a}ssig, Preise unter Einbeziehung personenbezogener Daten dynamisch zu gestalten.},
  language  = {de}
}
@misc{StaatHorbachGatzweiler2019,
  author    = {Staat, Manfred and Horbach, Andreas and Gatzweiler, Karl-Heinz},
  title     = {Biaxiales Materialpr{\"u}fsystem und Verfahren zu dessen Anwendung},
  year      = {2019},
  abstract  = {System und Verfahren zur Durchf{\"u}hrung von Messungen biaxialer und kreuzf{\"o}rmiger Zugversuche, wobei ein Weg oder eine Kraft auf eine Materialprobe {\"u}ber mindestens zwei Nadelarme mit Nadeln geleitet wird, die in einem Geh{\"a}use gelagert sind, wobei die Arme und/oder Nadelarme f{\"u}r eine ungehinderte Querkontraktion bei gleichm{\"a}ßiger Lasteinleitung um eine Achse drehbar gelagert und seitlich auslenkbar sind.},
  language  = {de}
}
@article{LinderBecklerDoerretal.2019,
  author    = {Linder, Peter and Beckler, Matthias and Doerr, Leo and Stoelzle-Feix, Sonja and Fertig, Niels and Jung, Alexander and Staat, Manfred and Gossmann, Matthias},
  title     = {A new in vitro tool to investigate cardiac contractility under physiological mechanical conditions},
  series = {Journal of Pharmacological and Toxicological Methods},
  volume    = {99},
  journal   = {Journal of Pharmacological and Toxicological Methods},
  number    = {Article number 106595},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1056-8719},
  doi       = {10.1016/j.vascn.2019.05.162},
  year      = {2019},
  language  = {en}
}
@misc{Golland2019,
  author    = {Golland, Alexander},
  title     = {Rezension zu: Reimer - Verwaltungsdatenschutzrecht: Das neue Recht f{\"u}r die beh{\"o}rdliche Praxis (2019)},
  series = {DSB Datenschutz-Berater},
  volume    = {43},
  journal   = {DSB Datenschutz-Berater},
  number    = {9},
  issn      = {0170-7256},
  pages     = {210 -- 210},
  year      = {2019},
  language  = {de}
}
@inproceedings{LudowicyRingsFingeretal.2019,
  author    = {Ludowicy, Jonas and Rings, Ren{\´e} and Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {Impact of Propulsion Technology Levels on the Sizing and Energy Consumption for Serial HybridElectric General Aviation Aircraft},
  series = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  booktitle = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019},
  pages     = {14 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{SattlerAlexopoulosChicoCaminosetal.2019,
  author    = {Sattler, Johannes Christoph and Alexopoulos, Spiros and Chico Caminos, Ricardo Alexander and Mitchell, John C. and Ruiz, Victor C. and Kalogirou, Soteris and Ktistis, Panayiotis K. and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117663},
  pages     = {150007-1 -- 150007-8},
  year      = {2019},
  language  = {en}
}
@inproceedings{FingerGoettenBraunetal.2019,
  author    = {Finger, Felix and G{\"o}tten, Falk and Braun, Carsten and Bil, C.},
  title     = {On Aircraft Design Under the Consideration of Hybrid-Electric Propulsion Systems},
  series = {APISAT 2018: The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018)},
  booktitle = {APISAT 2018: The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018)},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-13-3305-7},
  doi       = {10.1007/978-981-13-3305-7_99},
  pages     = {1261 -- 1272},
  year      = {2019},
  abstract  = {A hybrid-electric propulsion system combines the advantages of fuel-based systems and battery powered systems and offers new design freedom. To take full advantage of this technology, aircraft designers must be aware of its key differences, compared to conventional, carbon-fuel based, propulsion systems. This paper gives an overview of the challenges and potential benefits associated with the design of aircraft that use hybrid-electric propulsion systems. It offers an introduction of the most popular hybrid-electric propulsion architectures and critically assess them against the conventional and fully electric propulsion configurations. The effects on operational aspects and design aspects are covered. Special consideration is given to the application of hybrid-electric propulsion technology to both unmanned and vertical take-off and landing aircraft. The authors conclude that electric propulsion technology has the potential to revolutionize aircraft design. However, new and innovative methods must be researched, to realize the full benefit of the technology.},
  language  = {en}
}
@phdthesis{Beckmann2019,
  author    = {Beckmann, Nils},
  title     = {Characterization of the hydrogen-dry-low-Nox-micromix-combustion-principle for hydrogen-methane fuel mixtures},
  publisher = {RMIT University},
  address   = {Melbourne},
  pages     = {XV, 160 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{LuftGebhardtBalc2019,
  author    = {Luft, Angela and Gebhardt, Andreas and Balc, Nicolae},
  title     = {Challenges of additive manufacturing in production systems},
  series = {Modern technologies in manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern technologies in manufacturing (MTeM 2019)},
  number    = {Article 01003},
  doi       = {10.1051/matecconf/201929901003},
  pages     = {6 Seiten},
  year      = {2019},
  language  = {en}
}
@misc{Golland2019,
  author    = {Golland, Alexander},
  title     = {Rezension zu: Gola/Heckmann, BDSG, Kommentar, 13. Auflage (2019)},
  series = {DSB Datenschutz-Berater},
  volume    = {43},
  journal   = {DSB Datenschutz-Berater},
  number    = {5},
  issn      = {0170-7256},
  pages     = {120 -- 120},
  year      = {2019},
  language  = {de}
}
@article{Golland2019,
  author    = {Golland, Alexander},
  title     = {Gemeinsam einsam: Ein „Like" f{\"u}r die gemeinsame Verantwortlichkeit?},
  series = {ZD Zeitschrift f{\"u}r Datenschutz},
  volume    = {9},
  journal   = {ZD Zeitschrift f{\"u}r Datenschutz},
  number    = {9},
  editor    = {Hoeren, Thomas and Schneider, Jochen and Selmayr, Martin and Spies, Axel and Wybitul, Tim},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {2192-5593},
  pages     = {381 -- 382},
  year      = {2019},
  language  = {de}
}
@inproceedings{BungOertel2019,
  author    = {Bung, Daniel Bernhard and Oertel, Mario},
  title     = {Wave breaking over a submerged horizontal plate: Optical Flow, LES and RANS},
  series = {E-proceedings of the 38th IAHR World Congress September 1-6, 2019, Panama City, Panama},
  booktitle = {E-proceedings of the 38th IAHR World Congress September 1-6, 2019, Panama City, Panama},
  doi       = {10.3850/38WC092019-0509},
  pages     = {3690 -- 3698},
  year      = {2019},
  language  = {en}
}
@misc{Golland2019,
  author    = {Golland, Alexander},
  title     = {Diensteerbringung darf nicht von der Erteilung einer Einwilligung abh{\"a}ngig gemacht werden (Urteil vom 31.08.2018)},
  series = {DSB Datenschutz-Berater},
  journal   = {DSB Datenschutz-Berater},
  number    = {1},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a. M.},
  issn      = {0170-7256},
  pages     = {15 -- 16},
  year      = {2019},
  language  = {de}
}
@article{Golland2019,
  author    = {Golland, Alexander},
  title     = {Reichweite des "Joint Controllership": Neue Fragen der gemeinsamen Verantwortlichkeit},
  series = {K\&R Kommunikation \& Recht},
  volume    = {22},
  journal   = {K\&R Kommunikation \& Recht},
  number    = {9},
  publisher = {dfv Mediengruppe, Deutscher Fachverlag GmbH},
  address   = {Frankfurt am Main},
  issn      = {1434-6354},
  pages     = {533 -- 537},
  year      = {2019},
  abstract  = {Kein Urteil zum Datenschutzrecht sorgte im vergangenen Jahr f{\"u}r mehr panische Reaktionen als die Entscheidung des EuGH in der Rechtssache "Wirtschaftsakademie Schleswig-Holstein"(C-210/16). Das Urteil warf in datenschutzrechtlicher Literatur und {\"O}ffentlichkeit zahlreiche Fragen auf: Ist jetzt jeder "gemeinsam" Verantwortlicher? Was sind die Kriterien? Der EuGH hat k{\"u}rzlich in einem - dem allgemeinen Vernehmen nach aufsehenerregenden, de facto aber kaum {\"u}berraschenden - Urteil f{\"u}r Klarheit gesorgt. Dabei hat das Gericht jedoch einige Fragen offengelassen und neue Fragen aufgeworfen. Ein Blick auf alte und neue Herausforderungen in Kooperationsszenarien.},
  language  = {de}
}
@article{AchtsnichtToedterNiehuesetal.2019,
  author    = {Achtsnicht, Stefan and T{\"o}dter, Julia and Niehues, Julia and Tel{\"o}ken, Matthias and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim and Schr{\"o}per, Florian},
  title     = {3D printed modular immunofiltration columns for frequency mixing-based multiplex magnetic immunodetection},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {1},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19010148},
  pages     = {15 Seiten},
  year      = {2019},
  abstract  = {For performing point-of-care molecular diagnostics, magnetic immunoassays constitute a promising alternative to established enzyme-linked immunosorbent assays (ELISA) because they are fast, robust and sensitive. Simultaneous detection of multiple biomolecular targets from one body fluid sample is desired. The aim of this work is to show that multiplex magnetic immunodetection based on magnetic frequency mixing by means of modular immunofiltration columns prepared for different targets is feasible. By calculations of the magnetic response signal, the required spacing between the modules was determined. Immunofiltration columns were manufactured by 3D printing and antibody immobilization was performed in a batch approach. It was shown experimentally that two different target molecules in a sample solution could be individually detected in a single assaying step with magnetic measurements of the corresponding immobilization filters. The arrangement order of the filters and of a negative control did not influence the results. Thus, a simple and reliable approach to multi-target magnetic immunodetection was demonstrated.},
  language  = {en}
}
@book{KrauseUlkeMartinetal.2019,
  author    = {Krause, Thomas and Ulke, Bernd and Martin, Joachim and Lemke, J{\"o}rg and Sparla, Peter and Streit, Wilfried},
  title     = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb: Klausurvorbereitung mit ausf{\"u}hrlichen L{\"o}sungen},
  editor    = {Krause, Thomas and Ulke, Bernd},
  edition   = {3. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23126-2 (Print) 978-3-658-23127-9 (Online)},
  pages     = {XI, 347 Seiten ; Illustrationen},
  year      = {2019},
  language  = {de}
}
@book{OPUS4-8743,
  title     = {Handbuch der Raumfahrttechnik},
  editor    = {Ley, Wilfried and Hallmann, Willi and Wittmann, Klaus},
  edition   = {5. Auflage},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-45429-3},
  pages     = {934 Seiten},
  year      = {2019},
  language  = {de}
}
@article{WingensMayPfaff2019,
  author    = {Wingens, Niklas and May, J{\"o}rg and Pfaff, Raphael},
  title     = {Betrieblich-technische Innovationsans{\"a}tze zur Bremsprobe nach einer Prozess{\"a}nderung},
  series = {Eisenbahntechnische Rundschau : ETR ; Zeitschrift f{\"u}r die gesamte Eisenbahntechnik},
  journal   = {Eisenbahntechnische Rundschau : ETR ; Zeitschrift f{\"u}r die gesamte Eisenbahntechnik},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {5},
  year      = {2019},
  language  = {de}
}
@article{KapelyukhHendersonScheeretal.2019,
  author    = {Kapelyukh, Yury and Henderson, Colin James and Scheer, Nico and Rode, Anja and Wolf, Charles Roland},
  title     = {Defining the contribution of CYP1A1 and CYP1A2 to drug metabolism using humanized CYP1A1/1A2 and Cyp1a1/Cyp1a2 KO mice},
  series = {Drug Metabolism and Disposition},
  journal   = {Drug Metabolism and Disposition},
  number    = {Early view},
  doi       = {10.1124/dmd.119.087718},
  pages     = {43 Seiten},
  year      = {2019},
  language  = {en}
}
@article{Timme2019,
  author    = {Timme, Michael},
  title     = {Die Unwirksamkeit von auf {\"O}ffnungsklauseln in Gemeinschaftsordnungen fußenden Beschl{\"u}ssen},
  series = {Monatsschrift f{\"u}r deutsches Recht},
  journal   = {Monatsschrift f{\"u}r deutsches Recht},
  number    = {15},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812},
  doi       = {10.9785/mdtr-2019-731509},
  pages     = {904 -- 905},
  year      = {2019},
  language  = {de}
}
@book{GebhardtKesslerThurn2019,
  author    = {Gebhardt, Andreas and Kessler, Julia and Thurn, Laura},
  title     = {3D printing : understanding additive manufacturing},
  edition   = {2. Auflage},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-1-56990-702-3},
  pages     = {XVI, 204 Seiten},
  year      = {2019},
  language  = {en}
}
@incollection{FinkenbergerBaumeisterKoch2019,
  author    = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria and Koch, Christian},
  title     = {Komplement und Verst{\"a}rker : Wandel durch neue Allianzen},
  series = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  booktitle = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-578-9},
  pages     = {10 -- 39},
  year      = {2019},
  language  = {de}
}
@incollection{FinkenbergerBaumeisterKoch2019,
  author    = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria and Koch, Christian},
  title     = {Themen},
  series = {Komplement und Verst{\"a}rker: zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  booktitle = {Komplement und Verst{\"a}rker: zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-578-9},
  pages     = {50 -- 57},
  year      = {2019},
  language  = {de}
}
@article{LeschingerBirgelHackletal.2019,
  author    = {Leschinger, Tim and Birgel, Stefan and Hackl, Michael and Staat, Manfred and M{\"u}ller, Lars Peter and Wegmann, Kilian},
  title     = {A musculoskeletal shoulder simulation of moment arms and joint reaction forces after medialization of the supraspinatus footprint in rotator cuff repair},
  series = {Computer Methods in Biomechanics and Biomedical Engineering},
  journal   = {Computer Methods in Biomechanics and Biomedical Engineering},
  number    = {Early view},
  publisher = {Taylor \& Francis},
  address   = {London},
  doi       = {10.1080/10255842.2019.1572749},
  year      = {2019},
  language  = {en}
}
@misc{ReiswichBrandtCzupalla2019,
  author    = {Reiswich, Martin and Brandt, Hannes and Czupalla, Markus},
  title     = {Passive thermal control by integration of phase change material into additively manufactured structures},
  series = {E2. 47th Student conference},
  journal   = {E2. 47th Student conference},
  year      = {2019},
  abstract  = {Optical Instruments require an extremely stable thermal surrounding to prevent loss of data quality by misalignments of the instrument components resulting from material deformation due to temperature f luctuations (e.g. from solar intrusion). Phase Change Material (PCM) can be applied as a thermal damper to achieve a more uniform temperature distribution. The challenge of this method is, among others, the integration of PCM into affected areas. If correctly designed, incoming heat is latently absorbed during phase change of the PCM, i.e. the temperature of a structure remains almost constant. In a cold phase, the heat during phase change is released again latently until the PCM returns to its original state of aggregation. Thus, the structure is thermally stabilized. At FH Aachen- University of Applied Sciences research is conducted to apply PCM directly into the structures of affected components (baffles, optical benches, electronic boxes, etc.). Through the application of Additive Manufacturing, the necessary voids are directly printed into these structures and filled later with PCM. Additive Manufacturing enables complex structures that would not have been possible with conservative manufacturing methods. A corresponding Breadboard was developed and manufactured by Selective Laser Melting (SLM). The current state of research includes the handling and analysis of the Breadboard, tests and a correlation of the thermal model. The results have shown analytically and practically that it is possible to use PCM as an integral part of the structure as a thermal damper. The results serve as a basis for the further development of the technology, which should maximize performance and enable the integration of PCM into much more complex structures.},
  language  = {en}
}
@article{Huening2019,
  author    = {H{\"u}ning, Felix},
  title     = {Nachr{\"u}stm{\"o}glichkeiten von Dieselfahrzeugen aus technischer Sicht},
  series = {Zeitschrift f{\"u}r Verkehrsrecht : NZV},
  journal   = {Zeitschrift f{\"u}r Verkehrsrecht : NZV},
  number    = {1},
  publisher = {C.H.Beck},
  pages     = {27 -- 32},
  year      = {2019},
  language  = {de}
}
@article{HerrmannSchwarzenbartDittmannGabrieletal.2019,
  author    = {Herrmann, Ulf and Schwarzenbart, Marc and Dittmann-Gabriel, S{\"o}ren and May, Martin},
  title     = {Hochtemperatur-W{\"a}rmespeicher f{\"u}r die Strom- und W{\"a}rmewende},
  series = {Solarzeitalter : Politik, Kultur und {\"O}konomie erneuerbarer Energien},
  volume    = {31},
  journal   = {Solarzeitalter : Politik, Kultur und {\"O}konomie erneuerbarer Energien},
  number    = {2},
  issn      = {0937-3802},
  pages     = {18 -- 23},
  year      = {2019},
  language  = {de}
}
@book{Laack2019,
  author    = {Laack, Walter van},
  title     = {Weltbilder gestern und heute - Was bleibt und wor{\"u}ber lacht man morgen?},
  series = {Vortr{\"a}ge \& Einsichten, Lectures \& Insights},
  journal   = {Vortr{\"a}ge \& Einsichten, Lectures \& Insights},
  number    = {Band 2},
  publisher = {van Laack Buchverlag},
  address   = {Aachen},
  isbn      = {ISBN 978-3936624-44-1},
  pages     = {56 Seiten},
  year      = {2019},
  language  = {de}
}
@incollection{TippkoetterMoehringRothetal.2019,
  author    = {Tippk{\"o}tter, Nils and M{\"o}hring, Sophie and Roth, Jasmine and Wulfhorst, Helene},
  title     = {Logistics of lignocellulosic feedstocks: preprocessing as a preferable option},
  series = {Biorefineries},
  booktitle = {Biorefineries},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-97117-9},
  doi       = {10.1007/10_2017_58},
  pages     = {43 -- 68},
  year      = {2019},
  abstract  = {In comparison to crude oil, biorefinery raw materials are challenging in concerns of transport and storage. The plant raw materials are more voluminous, so that shredding and compacting usually are necessary before transport. These mechanical processes can have a negative influence on the subsequent biotechnological processing and shelf life of the raw materials. Various approaches and their effects on renewable raw materials are shown. In addition, aspects of decentralized pretreatment steps are discussed. Another important aspect of pretreatment is the varying composition of the raw materials depending on the growth conditions. This problem can be solved with advanced on-site spectrometric analysis of the material.},
  language  = {en}
}
@inproceedings{HunkerJungGossmannetal.2019,
  author    = {Hunker, Jan and Jung, Alexander and Goßmann, Matthias and Linder, Peter and Staat, Manfred},
  title     = {Development of a tool to analyze the conduction speed in microelectrode array measurements of cardiac tissue},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {7 -- 8},
  year      = {2019},
  abstract  = {The discovery of human induced pluripotent stem cells reprogrammed from somatic cells [1] and their ability to differentiate into cardiomyocytes (hiPSC-CMs) has provided a robust platform for drug screening [2]. Drug screenings are essential in the development of new components, particularly for evaluating the potential of drugs to induce life-threatening pro-arrhythmias. Between 1988 and 2009, 14 drugs have been removed from the market for this reason [3]. The microelectrode array (MEA) technique is a robust tool for drug screening as it detects the field potentials (FPs) for the entire cell culture. Furthermore, the propagation of the field potential can be examined on an electrode basis. To analyze MEA measurements in detail, we have developed an open-source tool.},
  language  = {en}
}